about summary refs log tree commit diff
path: root/NEWS
Commit message (Collapse)AuthorAgeFilesLines
...
* Update fixed bug listAlan Modra2014-04-161-4/+4
|
* Support _r_debug for static binaries.Carlos O'Donell2014-04-141-1/+1
| | | | | | | | | | | | | | | | We initialize _r_debug for static binaries to allows debug agents to treat static binaries a little more like dyanmic ones. This simplifies the work a debug agent has to do to access TLS in a static binary via libthread_db. Tested on x86_64. See: https://sourceware.org/ml/libc-alpha/2014-04/msg00183.html [BZ #16831] * csu/libc-start.c (LIBC_START_MAIN) [!SHARED]: Call _dl_debug_initialize.
* Fix qsort argument order in collation exampleAllan McRae2014-04-121-1/+1
|
* NEWS: Add comment about changed ABI on s390 and s390x.Andreas Krebbel2014-04-111-0/+14
|
* Use statvfs64() for pathconf(_PC_NAME_MAX).Peter TB Brett2014-04-091-6/+6
| | | | | | | | | pathconf(_PC_NAME_MAX) was implemented on top of statfs(). The 32bit version therefore fails EOVERFLOW if the filesystem blockcount is sufficiently large. Most pathconf() queries use statvfs64(), which avoids this issue. This patch modifies pathconf(_PC_NAME_MAX) to do likewise.
* PowerPC: Fix nearbyint/nearbyintf result for FE_DOWNWARDAdhemerval Zanella2014-04-061-1/+1
| | | | | | | | | This patch fixes the powerpc32 optimized nearbyint/nearbyintf bogus results for FE_DOWNWARD rounding mode. This is due wrong instructions sequence used in the rounding calculation (two subtractions instead of adition and a subtraction). Fixes BZ#16815.
* Fix catan, catanh, __ieee754_logf in round-downward mode (bug 16799, bug 16800).Joseph Myers2014-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes incorrect results from catan and catanh of certain special inputs in round-downward mode (bug 16799), and incorrect results of __ieee754_logf (+/-0) in round-downward mode (bug 16800) that show up through catan/catanh when tested in all rounding modes, but not directly in the testing for logf because the bug gets hidden by the wrappers. Both bugs involve a zero that should be +0 being -0 instead: one computed as (1-x)*(1+x) in the catan/catanh case, and one as (x-x) in the logf case. The fixes ensure positive zero is used. Testing of catan and catanh in all rounding modes is duly enabled. I expect there are various other bugs in special cases in __ieee754_* functions that are normally hidden by the wrappers but would show up for testing with -lieee (or in future with -fno-math-errno if we replace -lieee and _LIB_VERSION with compile-time redirection to new *_noerrno symbol names). Tested x86_64 and x86 and ulps updated accordingly. [BZ #16799] [BZ #16800] * math/s_catan.c (__catan): Avoid passing -0 denominator to atan2 with 0 numerator. * math/s_catanf.c (__catanf): Likewise. * math/s_catanh.c (__catanh): Likewise. * math/s_catanhf.c (__catanhf): Likewise. * math/s_catanhl.c (__catanhl): Likewise. * math/s_catanl.c (__catanl): Likewise. * sysdeps/ieee754/flt-32/e_logf.c (__ieee754_logf): Always divide by positive zero when computing -Inf result. * math/libm-test.inc (catan_test): Use ALL_RM_TEST. (catanh_test): Likewise. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix clog / clog10 sign of zero result in round-downward mode (bug 16789).Joseph Myers2014-04-021-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bug 16789, incorrect sign of (real part) zero result from clog and clog10 in round-downward mode, arising from that real part being computed as 0 - 0. To ensure that an underflow exception occurred, the code used an underflowing value (the next term in the series for log1p) in arithmetic computing the real part of the result, yielding the problematic 0 - 0 computation in some cases even when the mathematical result would be small but positive. The patch changes this code to use the math_force_eval approach to ensuring that an underflowing computation actually occurs. Tests of clog and clog10 are enabled in all rounding modes. Tested x86_64 and x86 and ulps updated accordingly. [BZ #16789] * math/s_clog.c (__clog): Use math_force_eval to ensure underflow instead of using underflowing value in computing result. * math/s_clog10.c (__clog10): Likewise. * math/s_clog10f.c (__clog10f): Likewise. * math/s_clog10l.c (__clog10l): Likewise. * math/s_clogf.c (__clogf): Likewise. * math/s_clogl.c (__clogl): Likewise. * math/libm-test.inc (clog_test): Use ALL_RM_TEST. (clog10_test): Likewise. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Correct IBM long double nextafterl.Alan Modra2014-04-021-1/+1
| | | | | | | | | | | | Fix for values near a power of two, and some tidies. [BZ #16739] * sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl): Correct output when value is near a power of two. Use int64_t for lx and remove casts. Use decimal rather than hex exponent constants. Don't use long double multiplication when double will suffice. * math/libm-test.inc (nextafter_test_data): Add tests. * NEWS: Add 16739 and 16786 to bug list.
* Update NEWS for fixed bug 13347Florian Weimer2014-04-011-5/+5
|
* Set errno for scalb errors (bug 6803, bug 6804).Joseph Myers2014-03-311-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the default mode of scalb to set errno (bugs 6803 and 6804). Previously, the _LIB_VERSION == _SVID_ mode would set errno but only in some relevant cases, and with various peculiarities (such as errno setting when an exact infinity or zero result arises with an argument to scalb being an infinity). This patch leaves this mode bug-compatible, while making the default mode set errno in accordance with normal practice (so an exact infinity from an infinite argument is not an error, and nor is an exact zero result). gen-libm-test.pl is taught new notation such as ERRNO_PLUS_OFLOW to facilitate writing the tests of errno setting for underflow / overflow in libm-test.inc. Note that bug 6803 also covers scalbn and scalbln, but this patch only addresses the scalb parts of that bug (along with the whole of bug 6804). Tested x86_64 and x86. [BZ #6803] [BZ #6804] * math/w_scalb.c (__scalb): For non-SVID mode, check result and set errno as appropriate. * math/w_scalbf.c (__scalbf): Likewise. * math/w_scalbl.c (__scalbl): Likewise. * math/gen-libm-test.pl (parse_args): Handle ERRNO_PLUS_OFLOW, ERRNO_MINUS_OFLOW, ERRNO_PLUS_UFLOW and ERRNO_MINUS_UFLOW. * math/libm-test.inc (scalb_test_data): Add errno expectations. Add more NaN tests.
* Set errno for atan2 underflow (bug 16349).Joseph Myers2014-03-311-5/+5
| | | | | | | | | | | | | | | | | | | | | | | This patch fixes bug 16349, missing errno setting for atan2 underflow, by adding appropriate checks to the existing wrappers. (As in other cases, the __kernel_standard support for calling matherr is considered to be for existing code expecting existing rules for what's considered an error, even if those don't correspond to a general logical scheme for what counts as what kind of error, so __set_errno calls are added directly without any changes to __kernel_standard.) Tested x86_64 and x86. [BZ #16349] * math/w_atan2.c: Include <errno.h>. (__atan2): Set errno for result underflowing to zero. * math/w_atan2f.c: Include <errno.h>. (__atan2f): Set errno for result underflowing to zero. * math/w_atan2l.c: Include <errno.h>. (__atan2l): Set errno for result underflowing to zero. * math/auto-libm-test-in: Don't allow missing errno for some atan2 tests. * math/auto-libm-test-out: Regenerated.
* Fix futimesat for older MicroBlaze kernels (bug 16648).Joseph Myers2014-03-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the fixes for __ASSUME_* issues in preparation for moving to a 2.6.32 minimum kernel version, this *untested* patch fixes bug 16648, the definition of __ASSUME_ATFCTS meaning that the futimesat syscall is assumed for all MicroBlaze kernels despite not being present until 2.6.33. __ASSUME_ATFCTS controls conditionals relating to a lot of different syscalls in Linux-specific code (fstatat64 faccessat fchmodat fchownat futimesat newfstatat linkat mkdirat openat readlinkat renameat symlinkat unlinkat mknodat), where whether newfstatat fstatat64 futimesat are used depends on the architecture, as well as controlling whether openat64_not_cancel_3 is expected to work in sysdeps/posix/getcwd.c. The assumptions are all OK as of 2.6.32 except for this MicroBlaze case, and it's generally desirable to get rid of as many of the __ASSUME_ATFCTS conditionals as possible, to simplify the code (the fallbacks include potential unbounded dynamic stack allocations). Thus, rather than the simplest approach of undefining __ASSUME_ATFCTS for older kernels on MicroBlaze, this patch takes the approach of using the linux-generic implementation of futimesat for MicroBlaze kernels before 2.6.33 (all such kernels have the utimensat syscall). [BZ #16648] * sysdeps/unix/sysv/linux/microblaze/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_FUTIMESAT): Define. * sysdeps/unix/sysv/linux/microblaze/futimesat.c: New file.
* Fix scalb spurious "invalid" exceptions (bug 16770).Joseph Myers2014-03-291-1/+1
| | | | | | | | | | | | | | | | | | | | | This patch fixes bug 16770, spurious "invalid" exceptions from scalb when testing whether the second argument is an integer, by inserting appropriate range checks to determine whether a cast to int is safe. (Note that invalid_fn is a function that handles both nonintegers and large integers, distinguishing them reliably using functions such as __rint; note also that there are no issues with scalb needing to avoid spurious "inexact" exceptions - it's an old-POSIX XSI function, not a standard C function bound to an IEEE 754 operation - although the return value is still fully determined.) Tested x86_64 and x86. [BZ #16770] * math/e_scalb.c (__ieee754_scalb): Check second argument is not too large before casting to int. * math/e_scalbf.c (__ieee754_scalbf): Likewise. * math/e_scalbl.c (__ieee754_scalbl): Likewise. * math/libm-test.inc (scalb_test_data): Add more tests.
* Fix clog10 (-0 +/- 0i) (bug 16362).Joseph Myers2014-03-281-5/+5
| | | | | | | | | | | | | | | | | | | | | | This patch fixes the imaginary part of clog10 (-0 +/- 0i), which should be +/-pi / log(10) by analogy with clog (the functions were wrongly returning a result with imaginary part +/-pi, same as for clog, and the tests matched the incorrect result, though both functions and tests were correct for the similar case of clog10 (-inf +/- 0i)). Tested x86_64 and x86. [BZ #16362] * math/s_clog10.c (M_PI_LOG10E): New macro. (__clog10): Use M_PI_LOG10E instead of M_PI when real and imaginary parts are 0. * math/s_clog10f.c (M_PI_LOG10Ef): New macro. (__clog10f): Use M_PI_LOG10Ef instead of M_PI when real and imaginary parts are 0. * math/s_clog10l.c (M_PI_LOG10El): New macro. (__clog10l): Use M_PI_LOG10El instead of M_PIl when real and imaginary parts are 0. * math/libm-test.inc (clog10_test_data): Update expected results for when real and imaginary parts are 0.
* Fix x86/x86_64 expl/exp10l spurious underflows (bug 16348).Joseph Myers2014-03-271-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes bug 16348, spurious underflows from x86/x86_64 expl on arguments close to 0. These implementations effectively use expm1 (on the fractional part of the argument) internally, so resulting in spurious underflows when the result is very close to 1. For arguments small enough that the round-to-nearest correct result is 1, this patch uses 1+x instead. These implementations are also used for exp10l and so the patch fixes similar issues there (the 0x1p-67 threshold being small enough to be correct for exp10l as well as expl). But because of spurious underflows in other exp10 implementations (bug 16560), the tests aren't added for exp10 at this point - they can be added when the other exp10 parts of that bug are fixed. Tested x86_64 and x86; no ulps updates needed. [BZ #16348] * sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [!USE_AS_EXPM1L]: Use 1+x for argument with exponent below -67. * sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [!USE_AS_EXPM1L]: Likewise. * math/auto-libm-test-in: Add more tests of exp. * math/auto-libm-test-out: Regenerated.
* Return NULL for wildcard values in getnetgrent from nscd (BZ #16759)Siddhesh Poyarekar2014-03-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | getnetgrent is supposed to return NULL for values that are wildcards in the (host, user, domain) triplet. This works correctly with nscd disabled, but with it enabled, it returns a blank ("") instead of a NULL. This is easily seen with the output of `getent netgroup foonet` for a netgroup foonet defined as follows in /etc/netgroup: foonet (,foo,) The output with nscd disabled is: foonet ( ,foo,) while with nscd enabled, it is: foonet (,foo,) The extra space with nscd disabled is due to the fact that `getent netgroup` adds it if the return value from getnetgrent is NULL for either host or user.
* Avoid overlapping addresses to stpcpy calls in nscd (BZ #16760)Siddhesh Poyarekar2014-03-271-1/+1
| | | | | | | | | | | | | | | | | | Calls to stpcpy from nscd netgroups code will have overlapping source and destination when all three values in the returned triplet are non-NULL and in the expected (host,user,domain) order. This is seen in valgrind as: ==3181== Source and destination overlap in stpcpy(0x19973b48, 0x19973b48) ==3181== at 0x4C2F30A: stpcpy (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so) ==3181== by 0x12567A: addgetnetgrentX (string3.h:111) ==3181== by 0x12722D: addgetnetgrent (netgroupcache.c:665) ==3181== by 0x11114C: nscd_run_worker (connections.c:1338) ==3181== by 0x4E3C102: start_thread (pthread_create.c:309) ==3181== by 0x59B81AC: clone (clone.S:111) ==3181== Fix this by using memmove instead of stpcpy.
* Fix nscd lookup for innetgr when netgroup has wildcards (BZ #16758)Siddhesh Poyarekar2014-03-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | nscd works correctly when the request in innetgr is a wildcard, i.e. when one or more of host, user or domain parameters is NULL. However, it does not work when the the triplet in the netgroup definition has a wildcard. This is easy to reproduce for a triplet defined as follows: foonet (,foo,) Here, an innetgr call that looks like this: innetgr ("foonet", "foohost", "foo", NULL); should succeed and so should: innetgr ("foonet", NULL, "foo", "foodomain"); It does succeed with nscd disabled, but not with nscd enabled. This fix adds this additional check for all three parts of the triplet so that it gives the correct result. [BZ #16758] * nscd/netgroupcache.c (addinnetgrX): Succeed if triplet has blank values.
* Make x86_64 fegetenv preserve exception mask (bug 16198).Joseph Myers2014-03-261-4/+4
| | | | | | | | | | | | | Bug 16198 is x86_64 fegetenv wrongly masking exceptions for which traps are enabled, because that's a side-effect of the fnstenv instruction. This patch fixes it to use fldenv immediately after fnstenv, like the i386 version. Tested x86_64 and x86. [BZ #16198] * sysdeps/x86_64/fpu/fegetenv.c (fegetenv): Use fldenv after fnstenv. * math/test-fenv-preserve.c: New file. * math/Makefile (tests): Add test-fenv-preserve.
* Relax gen-auto-libm-tests may-underflow rules, test log1p in all rounding modes.Joseph Myers2014-03-251-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gen-auto-libm-tests presently allows but does not require underflow exceptions for results with magnitude in the range (greatest subnormal, least normal]. In some cases, the magnitude of the exact result is very slightly above the least normal, but rounding in the implementation results in it effectively computing an infinite-precision result that is slightly below the least normal, so raising an underflow exception. This is in accordance with the documented accuracy goals, but results in testsuite failures. This patch changes the logic to allow underflows when the mathematical result is up to 0.5ulp above the least normal (so in any case where the round-to-nearest result is the least normal). Ideally underflows in all these cases would be accepted only when an underflow with the actual result is consistent with the rounding mode (in FE_TOWARDZERO mode, a return value of the least normal implies that the infinite-precision result did not underflow so there should be no underflow exception, for example), so as to match the documented goals more precisely - whereas at present the tests for exceptions are completely independent of the tests of the returned values. (The same applies to overflow exceptions as well - they too should be checked for consistency with the result, as in FE_TOWARDZERO mode a result 1ulp below the largest finite value should be inconsistent with an overflow exception and cause a failure with overflow rather than simply being considered a 1ulp error when overflow is expected.) But the present patch at least deals with the cases causing spurious failures so that (a) certain existing tests no longer need to be marked as having spurious exceptions (such markings in auto-libm-test-in end up applying to more cases than just those they are needed for) and (b) log1p can be tested in all rounding modes without introducing more such failures. This patch duly moves tests of log1p to ALL_RM_TEST. Tested x86_64 and x86 and ulps updated accordingly. [BZ #16357] [BZ #16599] * math/gen-auto-libm-tests.c (fp_format_desc): Add field min_plus_half. (fp_formats): Update initializers. (init_fp_formats): Initialize new field. (output_for_one_input_case): Allow underflow for results up to min_plus_half. * math/libm-test.inc (log1p_test): Use ALL_RM_TEST. * math/auto-libm-test-in: Don't mark some underflows from asin and atanh as spurious. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* NEWS: Add 16712, 16713, 16714 to fixed bug list.Stefan Liebler2014-03-251-1/+1
|
* Fix BZ #16634.Paul Pluzhnikov2014-03-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | An application that erroneously tries to repeatedly dlopen("a.out", ...) may hit assertion failure: Inconsistency detected by ld.so: dl-tls.c: 474: _dl_allocate_tls_init: Assertion `listp != ((void *)0)' failed! dlopen() actually fails with "./a.out: cannot dynamically load executable", but it does so after incrementing dl_tls_max_dtv_idx. Once we run out of TLS_SLOTINFO_SURPLUS (62), we exit with above assertion failure. 2014-03-24 Paul Pluzhnikov <ppluzhnikov@google.com> [BZ #16634] * elf/dl-load.c (open_verify): Add mode parameter. Error early when ET_EXEC and mode does not have __RTLD_OPENEXEC. (open_path): Change from boolean 'secure' to complete flag 'mode' (_dl_map_object): Adjust. * elf/Makefile (tests): Add tst-dlopen-aout. * elf/tst-dlopen-aout.c: New test.
* Fix use of half-initialized result in getaddrinfo when using nscd (bug 16743)Andreas Schwab2014-03-241-1/+2
| | | | | | | | | | | | | | | | | | This fixes a bug in the way the results from __nscd_getai are collected: for every returned result a new entry is first added to the gaih_addrtuple list, but if that result doesn't match the request this entry remains uninitialized. So for this non-matching result an extra result with uninitialized content is returned. To reproduce (with nscd running): $ getent ahostsv4 localhost 127.0.0.1 STREAM localhost 127.0.0.1 DGRAM 127.0.0.1 RAW (null) STREAM (null) DGRAM (null) RAW
* Account for alloca use when collecting interface addresses (bug 16002)Andreas Schwab2014-03-241-3/+3
| | | | | | | | | | | | To reproduce: # ip li add name dummy0 type dummy # site_id=$(head -c6 /dev/urandom | od -tx2 -An | tr ' ' ':') # for ((i = 0; i < 65536; i++)) do > ip ad ad $(printf fd80$site_id::%04x $i)/128 dev dummy0 > done # (ulimit -s 900; getent ahosts localhost) # ip li de dummy0
* Fix dbl-64 exp overflow/underflow in non-default rounding modes (bug 16284).Joseph Myers2014-03-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dbl-64 version of exp needs round-to-nearest mode for its internal computations, but that has the consequence of inappropriate overflowing and underflowing results in other rounding modes. This patch fixes this by recomputing the relevant results in cases where the round-to-nearest result overflows to infinity or underflows to zero (most of the diffs are actually just consequent reindentation). Tests are enabled in all rounding modes for complex functions using exp - but not for cexp because it turns out there are bugs causing spurious underflows for cexp for some tests, which will need to be fixed separately (I suspect ccos ccosh csin csinh ctan ctanh have similar bugs, just not shown by the present set of test inputs). Tested x86_64 and x86 and ulps updated accordingly. [BZ #16284] * sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Use original rounding mode to recompute results that overflow to infinity or underflow to zero. * math/auto-libm-test-in: Don't mark tests as expected to fail for bug 16284. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (ccos_test): Use ALL_RM_TEST. (ccosh_test): Likewise. (csin_test_data): Use plus_oflow. (csin_test): Use ALL_RM_TEST. (csinh_test_data): Use plus_oflow. (csinh_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix log (1) in round-downward mode (bug 16731).Joseph Myers2014-03-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to ISO C Annex F, log (1) should be +0 in all rounding modes, but some implementations in glibc wrongly return -0 in round-downward mode (mapping to log1p (x - 1) is problematic because 1 - 1 is -0 in round-downward mode, and log1p (-0) is -0). This patch fixes this. (It helps with some implementations of other functions such as acosh, log2 and log10 that call out to log, but not enough to enable all-rounding-modes testing for those functions without further fixes to other implementations of them.) Tested x86_64 and x86 and ulps updated accordingly, and did spot tests for mips64 for the ldbl-128 fix, and i586 for the sysdeps/i386/fpu implementations shadowed by those in sysdeps/i386/i686/fpu. [BZ #16731] * sysdeps/i386/fpu/e_log.S (__ieee754_log): Take absolute value when x - 1 is zero. * sysdeps/i386/fpu/e_logf.S (__ieee754_logf): Likewise. * sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Likewise. * sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise. * sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Return +0 when argument is 1. * sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Likewise. * sysdeps/x86_64/fpu/e_logl.S: Take absolute value when x - 1 is zero. * math/libm-test.inc (log_test): Use ALL_RM_TEST. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* Fix __ASSUME_PREADV and __ASSUME_PWRITEV for Alpha and MicroBlaze (bug 16649).Joseph Myers2014-03-191-2/+2
| | | | | | | | | | | | | | | | | | | | Reviewing (for all architectures, with a baseline kernel version of 2.6.32) the kernel support for features for which __ASSUME_* macros would be affected by a move to 2.6.32 as minimum kernel version showed up that __ASSUME_PREADV and __ASSUME_PWRITEV were wrongly defined for MicroBlaze (despite the corresponding syscall table entries not being wired up in the kernel) and Alpha for 2.6.30 and above (although the support on Alpha was added in 2.6.33). This patch makes the kernel-features.h files undefine those macros for appropriate versions. [BZ #16649] * sysdeps/unix/sysv/linux/alpha/kernel-features.h [__LINUX_KERNEL_VERSION < 0x020621] (__ASSUME_PREADV): Undefine. [__LINUX_KERNEL_VERSION < 0x020621] (__ASSUME_PWRITEV): Likewise. * sysdeps/unix/sysv/linux/microblaze/kernel-features.h (__ASSUME_PREADV): Undefine. (__ASSUME_PWRITEV): Likewise.
* Fix offset caching for streams and use it for ftell (BZ #16680)Siddhesh Poyarekar2014-03-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ftell implementation was made conservative to ensure that incorrectly cached offsets never affect it. However, this causes problems for append mode when a file stream is rewound. Additionally, the 'clever' trick of using stat to get position for append mode files caused more problems than it solved and broke old behavior. I have described the various problems that it caused and then finally the solution. For a and a+ mode files, rewinding the stream should result in ftell returning 0 as the offset, but the stat() trick caused it to (incorrectly) always return the end of file. Now I couldn't find anything in POSIX that specifies the stream position after rewind() for a file opened in 'a' mode, but for 'a+' mode it should be set to 0. For 'a' mode too, it probably makes sense to keep it set to 0 in the interest of retaining old behavior. The initial file position for append mode files is implementation defined, so the implementation could either retain the current file position or move the position to the end of file. The earlier ftell implementation would move the offset to end of file for append-only mode, but retain the old offset for a+ mode. It would also cache the offset (this detail is important). My patch broke this and would set the initial position to end of file for both append modes, thus breaking old behavior. I was ignorant enough to write an incorrect test case for it too. The Change: I have now brought back the behavior of seeking to end of file for append-only streams, but with a slight difference. I don't cache the offset though, since we would want ftell to query the current file position through lseek while the stream is not active. Since the offset is moved to the end of file, we can rely on the file position reported by lseek and we don't need to resort to the stat() nonsense. Finally, the cache is always reliable, except when there are unflished writes in an append mode stream (i.e. both a and a+). In the latter case, it is safe to just do an lseek to SEEK_END. The value can be safely cached too, since the file handle is already active at this point. Incidentally, this is the only state change we affect in the file handle (apart from taking locks of course). I have also updated the test case to correct my impression of the initial file position for a+ streams to the initial behavior. I have verified that this does not break any existing tests in the testsuite and also passes with the new tests.
* Do not terminate default test runs on test failure.Joseph Myers2014-03-141-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and <https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>. Normal practice for software testsuites is that rather than terminating immediately when a test fails, they continue running and report at the end on how many tests passed or failed. The principle behind the glibc testsuite stopping on failure was probably that the expected state is no failures and so any failure indicates a problem such as miscompilation. In practice, while this is fairly close to true for native testing on x86_64 and x86 (kernel bugs and race conditions can still cause intermittent failures), it's less likely to be the case on other platforms, and so people testing glibc run the testsuite with "make -k" and then examine the logs to determine whether the failures are what they expect to fail on that platform, possibly with some automation for the comparison. This patch switches the glibc testsuite to the normal convention of not stopping on failure - unless you use stop-on-test-failure=y, in which case it behaves essentially as it did before (and does not generate overall test summaries on failure). Instead, the summary tests.sum may contain tests that FAILed. At the end of the test run, any FAIL or ERROR lines from tests.sum are printed, and then it exits with error status if there were any such lines. In addition, build failures will also cause the test run to stop - this has the justification that those *do* indicate serious problems that should be promptly fixed and aren't generally hard to fix (but apart from that, avoiding the build stopping on those failures seems harder). Note that unlike the previous patches in this series, this *does* require people with automation around testing glibc to change their processes - either to start using tests.sum / xtests.sum to track failures and compare them with expectations (with or without also using "make -k" and examining "make" logs to identify build failures), or else to use stop-on-test-failure=y and ignore the new tests.sum / xtests.sum mechanism. (If all you check is the exit status from "make check", no changes are needed unless you want to avoid test runs continuing after the first failure.) Tested x86_64. * scripts/evaluate-test.sh: Handle fourth argument to determine whether test run should stop on failure. * Makeconfig (stop-on-test-failure): New variable. (evaluate-test): Pass fourth argument to evaluate-test.sh based on $(stop-on-test-failure). * Makefile (tests): Give a summary of results from testing and exit with failure status if they include an ERROR or FAIL. (xtests): Likewise. * manual/install.texi (Configuring and compiling): Mention stop-on-test-failure=y. * INSTALL: Regenerated.
* PowerPC: remove wrong roundl implementation for PowerPC64Adhemerval Zanella2014-03-141-1/+1
| | | | | | | | | | | | | | | | | The roundl assembly implementation (sysdeps/powerpc/powerpc64/fpu/s_roundl.S) returns wrong results for some inputs where first double is a exact integer and the precision is determined by second long double. Checking on implementation comments and history, I am very confident the assembly implementation was based on a version before commit 5c68d401698a58cf7da150d9cce769fa6679ba5f that fixes BZ#2423 (Errors in long double (ldbl-128ibm) rounding functions in glibc-2.4). By just removing the implementation and make the build select sysdeps/ieee754/ldbl-128ibm/s_roundl.c instead fixes the failing math. This fixes 16707.
* PowerPC: remove wrong nearbyintl implementation for PPC64Adhemerval Zanella2014-03-141-1/+1
| | | | | | | | | | | | | | | | | | The nearbyintl assembly implementation (sysdeps/powerpc/powerpc64/fpu/s_nearbyintl.S) returns wrong results for some inputs where first double is a exact integer and the precision is determined by second long double. Checking on implementation comments and history, I am very confident the assembly implementation was based on a version before commit 5c68d401698a58cf7da150d9cce769fa6679ba5f that fixes BZ#2423 (Errors in long double (ldbl-128ibm) rounding functions in glibc-2.4). By just removing the implementation and make the build select sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c instead fixes the failing math. Fixes BZ#16706.
* PowerPC: remove wrong ceill implementation for PowerPC64Adhemerval Zanella2014-03-141-1/+1
| | | | | | | | | | | | | | | | The ceill assembly implementation (sysdeps/powerpc/powerpc64/fpu/s_ceill.S) returns wrong results for some inputs where first double is a exact integer and the precision is determined by second long double. Checking on implementation comments and history, I am very confident the assembly implementation was based on a version before commit 5c68d401698a58cf7da150d9cce769fa6679ba5f that fixes BZ#2423 (Errors in long double (ldbl-128ibm) rounding functions in glibc-2.4). By just removing the implementation and make the build select sysdeps/ieee754/ldbl-128ibm/s_ceill.c instead fixes the failing math. Fixes BZ#16701.
* 2014-03-12 Paul Pluzhnikov <ppluzhnikov@google.com>Paul Pluzhnikov2014-03-121-3/+3
| | | | | | | | | | | | [BZ #16381] * elf/Makefile (tests): Add tst-pie2. (tests-pie): Add tst-pie2. * elf/tst-pie2.c: New file. * elf/dl-load.c (_dl_map_object_from_fd): Assert correct l_type for ET_EXEC. * elf/rtld.c (map_doit): Load executable as lt_executable. (dl_main): Likewise.
* Fix __ASSUME_PSELECT for MicroBlaze (bug 16642).Joseph Myers2014-03-121-2/+2
| | | | | | | | | | | | | | | | | | | | Reviewing (for all architectures, with a baseline kernel version of 2.6.32) the kernel support for features for which __ASSUME_* macros would be affected by a move to 2.6.32 as minimum kernel version showed up that __ASSUME_PSELECT was wrongly defined for MicroBlaze, despite the corresponding syscall table entry not being wired up in the MicroBlaze kernel. This patch makes the MicroBlaze kernel-features.h undefine __ASSUME_PSELECT. I'd also encourage wiring it up in the kernel (so you can then make this #undef conditional, and eventually obsolete once a recent-enough kernel is required). I suspect it wasn't wired up because of the mistaken comment in asm/unistd.h "obsolete -> sys_pselect7" (there is no such syscall as pselect7). [BZ #16642] * sysdeps/unix/sysv/linux/microblaze/kernel-features.h (__ASSUME_PSELECT): Undefine.
* PowerPC: Fix bzero definition for static libc for PPC32Adhemerval Zanella2014-03-121-1/+2
| | | | | | | | | | This patch fixes an issue for powerpc32-fpu static build which fails with an 'bzero' undefined reference. This patch adds bzero ifunc selector for static builds and fixes the '__bzero_ppc' reference to default memset symbol (since static memset build does not provide ifunc selector). Fixes BZ#16689.
* Provide correct buffer length to netgroup queries in nscd (BZ #16695)Siddhesh Poyarekar2014-03-121-1/+1
| | | | | | | | | The buffer to query netgroup entries is allocated sufficient space for the netgroup entries and the key to be appended at the end, but it sends in an incorrect available length to the NSS netgroup query functions, resulting in overflow of the buffer in some special cases. The fix here is to factor in the key length when sending the available buffer and buffer length to the query functions.
* Fix nextafter overflow in non-default rounding modes (bug 16677).Joseph Myers2014-03-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ISO C requires the result of nextafter to be independent of the rounding mode, even when underflow or overflow occurs. This patch fixes the bug in various nextafter implementations that, having done an overflowing computation to force an overflow exception (correct), they then return the result of that computation rather than an infinity computed some other way (incorrect, when the overflowing result of arithmetic with that sign and rounding mode is finite but the correct result is infinite) - generally by falling through to existing code to return a value that in fact is correct for this case (but was computed by an integer increment and so without generating the exceptions required). Having fixed the bug, the previously deferred conversion of nextafter testing in libm-test.inc to ALL_RM_TEST is also included. Tested x86_64 and x86; also spot-checked results of nextafter tests for powerpc32 and mips64 to test the ldbl-128ibm and ldbl-128 changes. (The m68k change is untested.) [BZ #16677] * math/s_nextafter.c (__nextafter): Do not return value from overflowing computation. * sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/ieee754/flt-32/s_nextafterf.c (__nextafterf): Likewise. * sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl): Likewise. * sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise. * math/libm-test.inc (nextafter_test): Use ALL_RM_TEST.
* PowerPC: Fix bzero definition for static libc for PPC64Adhemerval Zanella2014-03-111-1/+1
| | | | | | | | | This patch fixes an issue for powerpc64[le] static build where __bzero is definied in multiple places (memset-ppc64.o and bzero.o). It is now defined only in bzero.o and memset-ppc64.o only defined __bzero_ppc for both dynamic and static library. Fixes BZ#16683.
* Mark nscd service as forking in systemd service file (BZ #16639)Siddhesh Poyarekar2014-03-101-1/+1
| | | | | | | | Currently the nscd service is installed in systemd as a simple service, which means that it is able to handle its own errors and does not quit. Since nscd does not fit that description, i.e. it can exit on errors like, say, failing to parse nscd.conf, it should be declared as forking instead.
* Fix POSIX namespace for <bits/siginfo.h> (bug 16674).Joseph Myers2014-03-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | <bits/siginfo.h> causes symbols ILL_*, FPE_*, SEGV_* BUS_*, CLD_*, POLL_* and TRAP_* to be exposed in <signal.h> (and <sys/wait.h>), even though those symbols are not in non-XSI POSIX before POSIX.1-2008 and even in POSIX.1-2008 the TRAP_* symbols are XSI-only. This patch conditions the symbols appropriately in the various <bits/siginfo.h> implementations (various <signal.h> and <sys/wait.h> conformtest issues remain for standards other than POSIX (1995/6)). Tested x86_64. [BZ #16674] * bits/siginfo.h (ILL_ILLOPC): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/ia64/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (ILL_BADIADDR): Likewise. (ILL_BREAK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (FPE_DECOVF): Likewise. (FPE_DECDIV): Likewise. (FPE_DECERR): Likewise. (FPE_INVASC): Likewise. (FPE_INVDEC): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (SEGV_PSTKOVF): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (TRAP_BRANCH): Likewise. (TRAP_HWBKPT): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/mips/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/s390/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/tile/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (ILL_DBLFLT): Likewise. (ILL_HARDWALL): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * sysdeps/unix/sysv/linux/x86/bits/siginfo.h (ILL_ILLOPC): Likewise. (ILL_ILLOPN): Likewise. (ILL_ILLADR): Likewise. (ILL_ILLTRP): Likewise. (ILL_PRVOPC): Likewise. (ILL_PRVREG): Likewise. (ILL_COPROC): Likewise. (ILL_BADSTK): Likewise. (FPE_INTDIV): Likewise. (FPE_INTOVF): Likewise. (FPE_FLTDIV): Likewise. (FPE_FLTOVF): Likewise. (FPE_FLTUND): Likewise. (FPE_FLTRES): Likewise. (FPE_FLTINV): Likewise. (FPE_FLTSUB): Likewise. (SEGV_MAPERR): Likewise. (SEGV_ACCERR): Likewise. (BUS_ADRALN): Likewise. (BUS_ADRERR): Likewise. (BUS_OBJERR): Likewise. (BUS_MCEERR_AR): Likewise. (BUS_MCEERR_AO): Likewise. (TRAP_BRKPT): Condition on [__USE_XOPEN_EXTENDED]. (TRAP_TRACE): Likewise. (CLD_EXITED): Condition on [__USE_XOPEN_EXTENDED || __USE_XOPEN2K8]. (CLD_KILLED): Likewise. (CLD_DUMPED): Likewise. (CLD_TRAPPED): Likewise. (CLD_STOPPED): Likewise. (CLD_CONTINUED): Likewise. (POLL_IN): Likewise. (POLL_OUT): Likewise. (POLL_MSG): Likewise. (POLL_ERR): Likewise. (POLL_PRI): Likewise. (POLL_HUP): Likewise. * conform/Makefile (test-xfail-POSIX/signal.h/conform): Remove. (test-xfail-POSIX/sys/wait.h/conform): Likewise.
* Include all of <time.h> from <sched.h> for older standards (bug 16670).Joseph Myers2014-03-071-1/+1
| | | | | | | | | | | | | | | | | This patch fixes one of the header namespace issues shown up by conformtest, <sched.h> failing to expose all symbols from <time.h> as required by older standards. The patch keeps the existing behavior if __USE_XOPEN2K is defined (the default; POSIX.1-2001 was the version that made it optional to expose these symbols), but ensures that all the symbols from <time.h> are exposed if an older standard is selected. Tested x86_64. [BZ #16670] * posix/sched.h [!__USE_XOPEN2K] (__need_time_t): Don't define before #include of <time.h>. [!__USE_XOPEN2K] (__need_timespec): Likewise. * conform/Makefile (test-xfail-POSIX/sched.h/conform): Remove. (test-xfail-UNIX98/sched.h/conform): Likewise.
* Separate ftell from fseek logic and avoid modifying FILE data (#16532)Siddhesh Poyarekar2014-03-041-2/+2
| | | | | | | | | | | | | | | ftell semantics are distinct from fseek(SEEK_CUR) especially when it is called on a file handler that is not yet active. Due to this caveat, much care needs to be taken while modifying the handler data and hence, this first iteration on separating out ftell focusses on maintaining handler data integrity at all times while it figures out the current stream offset. The result is that it makes a syscall for every offset request. There is scope for optimizing this by caching offsets when we know that the handler is active. A simple way to find out is when the buffers have data. It is not so simple to find this out when the buffer is empty without adding some kind of flag.
* Fix sign of input to bsloww1 (BZ #16623)Siddhesh Poyarekar2014-02-271-1/+1
| | | | | | | | In 84ba214c, I removed some redundant sign computations and in the process, I incorrectly got rid of a temporary variable, thus passing the absolute value of the input to bsloww1. This caused #16623. This fix undoes the incorrect change.
* BZ #16632: Change [_BSD/_SVID]_SOURCE warning.Carlos O'Donell2014-02-251-1/+1
| | | | | | | | | | | | | | | | | | Source packages that need to support both 2.19 and 2.20 will need to decide to use _BSD_SOURCE and _SVID_SOURCE vs. _DEFAULT_SOURCE. The difficulty in making that decision is that __GLIBC_MINOR__ is itself defined in features.h, but you want to set the feature test macros before including features.h. Therefore to ease the transition we should disable the warning if _DEFAULT_SOURCE is also defined. https://sourceware.org/ml/libc-alpha/2014-02/msg00666.html https://sourceware.org/glibc/wiki/Release/2.20#Packaging_Changes
* BZ #16613: Support TLS in audit libraries.Carlos O'Donell2014-02-251-1/+2
| | | | | | | | | | | This commit fixes a bug where the dynamic loader would crash when loading audit libraries, via LD_AUDIT, where those libraries used TLS. The dynamic loader was not considering that the audit libraries would use TLS and failed to bump the TLS generation counter leaving TLS usage inconsistent after loading the audit libraries. https://sourceware.org/ml/libc-alpha/2014-02/msg00569.html
* misc/sys/select.h (__FD_MASK): Avoid signed integer overflow.Florian Weimer2014-02-251-1/+1
| | | | | | | Shifting into the sign position is currently supported as a GCC extension, but explicitly subjected to future changes. Computation in the unsigned type followed by a cast to the signed type is a GCC extension that will be available forever.
* Fix race conditions in pldd that may leave the process stopped after detachingAndreas Schwab2014-02-251-1/+1
| | | | Fixes bug 15804
* Update ARM ulps for VFPv4 (bug 16600).Yury Gribov2014-02-211-1/+1
| | | | | [BZ #16600] * sysdeps/arm/libm-test-ulps: Update for VFPv4.
* Fix __ASSUME_SENDMMSG issues (bug 16611).Joseph Myers2014-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to the issues for accept4 and recvmmsg, __ASSUME_SENDMMSG is also confused about whether it relates to function availability or socketcall operation availability, and the conditions for the definition are always wrong (sendmmsg appeared in Linux kernel 3.0, not 2.6.39); this is now bug 16611. This patch splits the macro into separate macros like those for accept4 and recvmmsg, defining them for appropriate kernel versions. Tested x86_64, including that disassembly of the installed shared libraries is unchanged by this patch. [BZ #16611] * sysdeps/unix/sysv/linux/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030000 && __ASSUME_SOCKETCALL] (__ASSUME_SENDMMSG_SOCKETCALL): Define. [__LINUX_KERNEL_VERSION >= 0x030000 && (__i386__ || __x86_64__ || __powerpc__ || __sh__ || __sparc__)] (__ASSUME_SENDMMSG_SYSCALL): Likewise. [__i386__ || __powerpc__ || __sh__ || __sparc__] (__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL): Likewise. [__ASSUME_SENDMMSG_SOCKETCALL || __ASSUME_SENDMMSG_SYSCALL] (__ASSUME_SENDMMSG): Define instead of using previous [__LINUX_KERNEL_VERSION >= 0x020627] condition. * sysdeps/unix/sysv/linux/aarch64/kernel-features.h (__ASSUME_SENDMMSG_SYSCALL): Define. * sysdeps/unix/sysv/linux/alpha/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030200] (__ASSUME_SENDMMSG_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/arm/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/ia64/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/internal_sendmmsg.S [__ASSUME_SOCKETCALL && !__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL && !__ASSUME_SENDMMSG_SYSCALL] (__NR_sendmmsg): Undefine. [__ASSUME_SENDMMSG]: Change conditionals to [__ASSUME_SENDMMSG_SOCKETCALL]. * sysdeps/unix/sysv/linux/microblaze/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030300] (__ASSUME_SENDMMSG_SYSCALL): Define. * sysdeps/unix/sysv/linux/mips/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030100] (__ASSUME_SENDMMSG_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/sendmmsg.c [__ASSUME_SOCKETCALL && !__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL && !__ASSUME_SENDMMSG_SYSCALL] (__NR_sendmmsg): Undefine. [!__ASSUME_SENDMMSG]: Change conditional to [!__ASSUME_SENDMMSG_SOCKETCALL]. * sysdeps/unix/sysv/linux/tile/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL): Define. * sysdeps/unix/sysv/linux/hppa/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030100] (__ASSUME_SENDMMSG_SYSCALL): Define.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-10-27 04:57:38 +0000