summary refs log tree commit diff
path: root/Makeconfig
Commit message (Collapse)AuthorAgeFilesLines
* Makeconfig: Use $(error ...) to output error messageSimon Marchi2020-04-291-1/+1
| | | | | | | | | | | | | | | | | | Being not familiar with the glibc repository, I typed "make" inside some subdirectory that has a Makefile, and was met with: $ make ../Makeconfig:42: *** missing separator. Stop. At Makeconfig:42, we have: objdir must be defined by the build-directory Makefile. Change that to use $(error ...), which I guess was the original intention. The result is: $ make ../Makeconfig:42: *** objdir must be defined by the build-directory Makefile. Stop.
* Makeconfig: sandwich gnulib-tests between libc/ld linking of testsPaul E. Murphy2020-03-251-6/+6
| | | | | | | This better resembles the default linking process with the gnulibs, and also resolves the increasingly difficult to maintain f128-loader-link usage on powerpc64le as some libgcc symbols are dependent on those found in the loader (ld).
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-011-1/+1
|
* Expand $(as-needed) and $(no-as-needed) throughout the build systemFlorian Weimer2019-12-031-5/+2
| | | | | | | | | Since commit a3cc4f48e94f32c9532ee36982ac00eb1e5719b0 ("Remove --as-needed configure test."), --as-needed support is no longer optional. The macros are not much shorter and do not provide documentary value, either, so this commit removes them.
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* test-container: Install with $(sorted-subdirs) [BZ #24794]Tulio Magno Quites Machado Filho2019-07-291-3/+3
| | | | | | | | | | | | | Commit 35e038c1d2ccb3a75395662f9c4f28d85a61444f started to use an incomplete list of subdirs based on $(all-subdirs) causing testroot.pristine to miss files from nss. Tested if the list of files in testroot.pristine remains the same. [BZ #24794] * Makeconfig (all-subdirs): Improved source comments. * Makefile (testroot.pristine/install.stamp): Pass subdirs='$(sorted-subdirs)' to make install.
* Makeconfig: Move -Wl,-rpath-link options before library referencesFlorian Weimer2019-04-261-5/+14
| | | | | | | | | | | | | | | | | | | Previously, the -Wl,-rpath-link options came after the libraries injected using LDLIBS-* variables on the link editor command line for main programs. As a result, it could happen that installed libraries that reference glibc libraries used the installed glibc from the system directories, instead of the glibc from the build tree. This can lead to link failures if the wrong version of libpthread.so.0 is used, for instance, due to differences in the internal GLIBC_PRIVATE interfaces, as seen with memusagestat and -lgd after commit f9b645b4b0a10c43753296ce3fa40053fa44606a ("memusagestat: use local glibc when linking [BZ #18465]"). The isolation is necessarily imperfect because these installed libraries are linked against the installed glibc in the system directories. However, in most cases, the built glibc will be newer than the installed glibc, and this link is permitted because of the ABI backwards compatibility glibc provides.
* Makeconfig: Move $(CC) to +link command variablesFlorian Weimer2019-04-261-13/+17
| | | | | | This change is needed to add linker flags which come very early in the command linke (before LDFLAGS) and are not applied to test programs (only to installed programs).
* Extend BIND_NOW to installed programs with --enable-bind-nowFlorian Weimer2019-04-251-3/+5
| | | | | | | | Commit 2d6ab5df3b675e96ee587ae6a8c2ce004c6b1ba9 ("Document and fix --enable-bind-now [BZ #21015]") extended BIND_NOW to all installed shared objects. This change also covers installed programs. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Only build libm with -fno-math-errno (bug 24024)Aurelien Jarno2019-01-071-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1294b1892e ("Add support for sqrt asm redirects") added the -fno-math-errno flag to build most of the glibc in order to enable GCC to inline math functions. Due to GCC bug #88576, saving and restoring errno around calls to malloc are optimized-out. In turn this causes strerror to set errno to ENOMEM if it get passed an invalid error number and if malloc sets errno to ENOMEM (which might happen even if it succeeds). This is not allowed by POSIX. This patch changes the build flags, building only libm with -fno-math-errno and all the remaining code with -fno-math-errno. This should be safe as libm doesn't contain any code saving and restoring errno around malloc. This patch can probably be reverted once the GCC bug is fixed and available in stable releases. Tested on x86-64, no regression in the testsuite. Changelog: [BZ #24024] * Makeconfig: Build libm with -fno-math-errno but build the remaining code with -fmath-errno. * string/Makefile [$(build-shared)] (tests): Add test-strerror-errno. [$(build-shared)] (LDLIBS-test-strerror-errno): New variable. * string/test-strerror-errno.c: New file.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-011-1/+1
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Don't build libnsl for new ABIsAndreas Schwab2018-09-241-0/+55
| | | | | | For architectures and ABIs that are added in version 2.29 or later the option --enable-obsolete-nsl is no longer available, and no libnsl compatibility library is built.
* Makeconfig: Do not sort and deduplicate +cflags [BZ # 17248]Florian Weimer2018-08-211-3/+0
| | | | | The original intent behind this is unclear. It interferes with flags that has to be ordered in a particular way.
* Add --with-nonshared-cflags option to configureFlorian Weimer2018-08-171-1/+1
|
* Makeconfig (ASFLAGS): Always append required assembler flagsFlorian Weimer2018-08-171-1/+1
| | | | | Otherwise, it is impossible to set ASFLAGS differently from CFLAGS without also overriding essential flags such as -Wa,--noexecstack.
* New configure option --disable-crypt.Zack Weinberg2018-06-291-2/+7
| | | | | | | | Some Linux distributions are experimenting with a new, separately maintained and hopefully more agile implementation of the crypt API. To facilitate this, add a configure option which disables glibc's embedded libcrypt. When this option is given, libcrypt.* and crypt.h will not be built nor installed.
* Add support for sqrt asm redirectsWilco Dijkstra2018-03-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch series cleans up the many uses of __ieee754_sqrt(f/l) in GLIBC. The goal is to enable GCC to do the inlining, and if this fails call the __ieee754_sqrt function. This is done by internally declaring sqrt with asm redirects. The compat symbols and sqrt wrappers need to disable the redirect. The redirect is also disabled if there are already redirects defined when using -ffinite-math-only. All math functions (but not math tests, non-library code and libnldbl) are built with -fno-math-errno which means GCC will typically inline sqrt as a single instruction. This means targets are no longer forced to add a special inline for sqrt. * include/math.h (sqrt): Declare with asm redirect. (sqrtf): Likewise. (sqrtl): Likewise. (sqrtf128): Likewise. * Makeconfig: Add -fno-math-errno for libc/libm, but build testsuite, nonlib and libnldbl with -fmath-errno. * math/w_sqrt_compat.c: Define NO_MATH_REDIRECT. * math/w_sqrt_template.c: Likewise. * math/w_sqrtf_compat.c: Likewise. * math/w_sqrtl_compat.c: Likewise. * sysdeps/i386/fpu/w_sqrt.c: Likewise. * sysdeps/i386/fpu/w_sqrt_compat.c: Likewise. * sysdeps/generic/math-type-macros-float128.h: Remove math.h and complex.h.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-011-1/+1
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Replece LDFLAGS-* = $(no-pie-ldflag) with tst-*-no-pie = yes [BZ #22630]H.J. Lu2017-12-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 9d7a3741c9e59eba87fb3ca6b9f979befce07826 Author: H.J. Lu <hjl.tools@gmail.com> Date: Fri Dec 15 16:59:33 2017 -0800 Add --enable-static-pie configure option to build static PIE [BZ #19574] and commit 00c714df398b63934540d95ce3792596f7a94a6c Author: H.J. Lu <hjl.tools@gmail.com> Date: Mon Dec 18 12:24:26 2017 -0800 Pass -no-pie to GCC only if GCC defaults to PIE [BZ #22614] $(no-pie-ldflag) is no longer effective since no-pie-ldflag is defined to -no-pie only if GCC defaults to PIE. When --enable-static-pie is used to configure glibc build and GCC doesn't default to PIE. no-pie-ldflag is undefined and these tests: elf/Makefile:LDFLAGS-tst-dlopen-aout = $(no-pie-ldflag) elf/Makefile:LDFLAGS-tst-prelink = $(no-pie-ldflag) elf/Makefile:LDFLAGS-tst-main1 = $(no-pie-ldflag) gmon/Makefile:LDFLAGS-tst-gmon := $(no-pie-ldflag) may fail to link. This patch replaces "-pie" with $(if $($(@F)-no-pie),$(no-pie-ldflag),-pie) and repleces LDFLAGS-* = $(no-pie-ldflag) with tst-*-no-pie = yes so that tst-dlopen-aout, tst-prelink, tst-main1 and tst-gmon are always built as non-PIE, with and without --enable-static-pie, regardless if GCC defaults to PIE or non-PIE. Tested with build-many-glibcs.py without --enable-static-pie as well as with --enable-static-pie for x86_64, x32 and i686. [BZ #22630] * Makeconfig (link-pie-before-libc): Replace -pie with $(if $($(@F)-no-pie),$(no-pie-ldflag),-pie). * elf/Makefile (LDFLAGS-tst-dlopen-aout): Removed. (tst-dlopen-aout-no-pie): New. (LDFLAGS-tst-prelink): Removed. (tst-prelink-no-pie): New. (LDFLAGS-tst-main1): Removed. (tst-main1-no-pie): New. * gmon/Makefile (LDFLAGS-tst-gmon): Removed. (tst-gmon-no-pie): New.
* Pass -no-pie to GCC only if GCC defaults to PIE [BZ #22614]H.J. Lu2017-12-181-1/+3
| | | | | | | | | | | | | | | | | | | | After --enable-static-pie is added to configure, libc_cv_pie_default is set to yes when either --enable-static-pie is used to configure glibc or GCC defaults to PIE. We should set no-pie-ldflag to -no-pie, which is supported on GCC 6 and later, only if GCC defaults to PIE, not when --enable-static-pie is used to configure glibc. Tested on x32 with --enable-static-pie using GCC 5 and without --enable-static-pie using GCC 7. [BZ #22614] * Makeconfig (no-pie-ldflag): Set to -no-pie only if $(cc-pie-default) == yes. * config.make.in (cc-pie-default): New. * configure.ac (libc_cv_pie_default): Renamed to ... (libc_cv_cc_pie_default): This. (libc_cv_pie_default): Set to $libc_cv_cc_pie_default. * configure: Regenerated.
* Add --enable-static-pie configure option to build static PIE [BZ #19574]H.J. Lu2017-12-151-4/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Static PIE extends address space layout randomization to static executables. It provides additional security hardening benefits at the cost of some memory and performance. Dynamic linker, ld.so, is a standalone program which can be loaded at any address. This patch adds a configure option, --enable-static-pie, to embed the part of ld.so in static executable to create static position independent executable (static PIE). A static PIE is similar to static executable, but can be loaded at any address without help from a dynamic linker. When --enable-static-pie is used to configure glibc, libc.a is built as PIE and all static executables, including tests, are built as static PIE. The resulting libc.a can be used together with GCC 8 or above to build static PIE with the compiler option, -static-pie. But GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC with PIE support is needed. When an older GCC is used to build glibc with --enable-static-pie, proper input files are passed to linker to create static executables as static PIE, together with "-z text" to prevent dynamic relocations in read-only segments, which are not allowed in static PIE. The following changes are made for static PIE: 1. Add a new function, _dl_relocate_static_pie, to: a. Get the run-time load address. b. Read the dynamic section. c. Perform dynamic relocations. Dynamic linker also performs these steps. But static PIE doesn't load any shared objects. 2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in libc.a. crt1.o, which is used to create dynamic and non-PIE static executables, is updated to include a dummy _dl_relocate_static_pie. rcrt1.o is added to create static PIE, which will link in the real _dl_relocate_static_pie. grcrt1.o is also added to create static PIE with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for static PIE. Static PIE can work on all architectures which support PIE, provided: 1. Target must support accessing of local functions without dynamic relocations, which is needed in start.S to call __libc_start_main with function addresses of __libc_csu_init, __libc_csu_fini and main. All functions in static PIE are local functions. If PIE start.S can't reach main () defined in a shared object, the code sequence: pass address of local_main to __libc_start_main ... local_main: tail call to main via PLT can be used. 2. start.S is updated to check PIC instead SHARED for PIC code path and avoid dynamic relocation, when PIC is defined and SHARED isn't defined, to support static PIE. 3. All assembly codes are updated check PIC instead SHARED for PIC code path to avoid dynamic relocations in read-only sections. 4. All assembly codes are updated check SHARED instead PIC for static symbol name. 5. elf_machine_load_address in dl-machine.h are updated to support static PIE. 6. __brk works without TLS nor dynamic relocations in read-only section so that it can be used by __libc_setup_tls to initializes TLS in static PIE. NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled with -fPIE, regardless if --enable-static-pie is used to configure glibc. When glibc is configured with --enable-static-pie, libc.a is compiled with -fPIE, regardless whether GCC defaults to PIE or not. The same libc.a can be used to build both static executable and static PIE. There is no need for separate PIE copy of libc.a. On x86-64, the normal static sln: text data bss dec hex filename 625425 8284 5456 639165 9c0bd elf/sln the static PIE sln: text data bss dec hex filename 657626 20636 5392 683654 a6e86 elf/sln The code size is increased by 5% and the binary size is increased by 7%. Linker requirements to build glibc with --enable-static-pie: 1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from static PIE. 2. Linker can create working static PIE. The x86-64 linker needs the fix for https://sourceware.org/bugzilla/show_bug.cgi?id=21782 The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax" to "leal main@GOTOFF(%ebx), %eax" if main is defined locally. Binutils 2.29 or above are OK for i686 and x86-64. But linker status for other targets need to be verified. 3. Linker should resolve undefined weak symbols to 0 in static PIE: https://sourceware.org/bugzilla/show_bug.cgi?id=22269 4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS relocations, which should check bfd_link_executable instead: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Tested on aarch64, i686 and x86-64. Using GCC 7 and binutils master branch, build-many-glibcs.py with --enable-static-pie with all patches for static PIE applied have the following build successes: PASS: glibcs-aarch64_be-linux-gnu build PASS: glibcs-aarch64-linux-gnu build PASS: glibcs-armeb-linux-gnueabi-be8 build PASS: glibcs-armeb-linux-gnueabi build PASS: glibcs-armeb-linux-gnueabihf-be8 build PASS: glibcs-armeb-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabi build PASS: glibcs-arm-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabihf-v7a build PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build PASS: glibcs-m68k-linux-gnu build PASS: glibcs-microblazeel-linux-gnu build PASS: glibcs-microblaze-linux-gnu build PASS: glibcs-mips64el-linux-gnu-n32 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n32-soft build PASS: glibcs-mips64el-linux-gnu-n64 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n64-soft build PASS: glibcs-mips64-linux-gnu-n32 build PASS: glibcs-mips64-linux-gnu-n32-nan2008 build PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n32-soft build PASS: glibcs-mips64-linux-gnu-n64 build PASS: glibcs-mips64-linux-gnu-n64-nan2008 build PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n64-soft build PASS: glibcs-mipsel-linux-gnu build PASS: glibcs-mipsel-linux-gnu-nan2008 build PASS: glibcs-mipsel-linux-gnu-nan2008-soft build PASS: glibcs-mipsel-linux-gnu-soft build PASS: glibcs-mips-linux-gnu build PASS: glibcs-mips-linux-gnu-nan2008 build PASS: glibcs-mips-linux-gnu-nan2008-soft build PASS: glibcs-mips-linux-gnu-soft build PASS: glibcs-nios2-linux-gnu build PASS: glibcs-powerpc64le-linux-gnu build PASS: glibcs-powerpc64-linux-gnu build PASS: glibcs-tilegxbe-linux-gnu-32 build PASS: glibcs-tilegxbe-linux-gnu build PASS: glibcs-tilegx-linux-gnu-32 build PASS: glibcs-tilegx-linux-gnu build PASS: glibcs-tilepro-linux-gnu build and the following build failures: FAIL: glibcs-alpha-linux-gnu build elf/sln is failed to link due to: assertion fail bfd/elf64-alpha.c:4125 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-hppa-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] https://sourceware.org/bugzilla/show_bug.cgi?id=22537 FAIL: glibcs-ia64-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] FAIL: glibcs-powerpc-linux-gnu build FAIL: glibcs-powerpc-linux-gnu-soft build FAIL: glibcs-powerpc-linux-gnuspe build FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22264 FAIL: glibcs-powerpc-linux-gnu-power4 build elf/sln is failed to link due to: findlocale.c:96:(.text+0x22c): @local call to ifunc memchr This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-s390-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped assertion fail bfd/elflink.c:14299 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-sh3eb-linux-gnu build FAIL: glibcs-sh3-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu-soft build FAIL: glibcs-sh4-linux-gnu build FAIL: glibcs-sh4-linux-gnu-soft build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS code sequence expected by ld: https://sourceware.org/bugzilla/show_bug.cgi?id=22270 FAIL: glibcs-sparc64-linux-gnu build FAIL: glibcs-sparcv9-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu-32 build FAIL: glibcs-tilegx-linux-gnu build FAIL: glibcs-tilegx-linux-gnu-32 build FAIL: glibcs-tilepro-linux-gnu build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 [BZ #19574] * INSTALL: Regenerated. * Makeconfig (real-static-start-installed-name): New. (pic-default): Updated for --enable-static-pie. (pie-default): New for --enable-static-pie. (default-pie-ldflag): Likewise. (+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F)) with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)). Replace $(static-start-installed-name) with $(real-static-start-installed-name). (+prectorT): Updated for --enable-static-pie. (+postctorT): Likewise. (CFLAGS-.o): Add $(pie-default). (CFLAGS-.op): Likewise. * NEWS: Mention --enable-static-pie. * config.h.in (ENABLE_STATIC_PIE): New. * configure.ac (--enable-static-pie): New configure option. (have-no-dynamic-linker): New LIBC_CONFIG_VAR. (have-static-pie): Likewise. Enable static PIE if linker supports --no-dynamic-linker. (ENABLE_STATIC_PIE): New AC_DEFINE. (enable-static-pie): New LIBC_CONFIG_VAR. * configure: Regenerated. * csu/Makefile (omit-deps): Add r$(start-installed-name) and gr$(start-installed-name) for --enable-static-pie. (extra-objs): Likewise. (install-lib): Likewise. (extra-objs): Add static-reloc.o and static-reloc.os ($(objpfx)$(start-installed-name)): Also depend on $(objpfx)static-reloc.o. ($(objpfx)r$(start-installed-name)): New. ($(objpfx)g$(start-installed-name)): Also depend on $(objpfx)static-reloc.os. ($(objpfx)gr$(start-installed-name)): New. * csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie in libc.a. * csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to initimage. * csu/static-reloc.c: New file. * elf/Makefile (routines): Add dl-reloc-static-pie. (elide-routines.os): Likewise. (DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed. (tst-tls1-static-non-pie-no-pie): New. * elf/dl-reloc-static-pie.c: New file. * elf/dl-support.c (_dl_get_dl_main_map): New function. * elf/dynamic-link.h (ELF_DURING_STARTUP): Also check STATIC_PIE_BOOTSTRAP. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise. * gmon/Makefile (tests): Add tst-gmon-static-pie. (tests-static): Likewise. (DEFAULT-LDFLAGS-tst-gmon-static): Removed. (tst-gmon-static-no-pie): New. (CFLAGS-tst-gmon-static-pie.c): Likewise. (CRT-tst-gmon-static-pie): Likewise. (tst-gmon-static-pie-ENV): Likewise. (tests-special): Likewise. ($(objpfx)tst-gmon-static-pie.out): Likewise. (clean-tst-gmon-static-pie-data): Likewise. ($(objpfx)tst-gmon-static-pie-gprof.out): Likewise. * gmon/tst-gmon-static-pie.c: New file. * manual/install.texi: Document --enable-static-pie. * sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New. (_dl_get_dl_main_map): Likewise. * sysdeps/i386/configure.ac: Check if linker supports static PIE. * sysdeps/x86_64/configure.ac: Likewise. * sysdeps/i386/configure: Regenerated. * sysdeps/x86_64/configure: Likewise. * sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default). (ASFLAGS-.op): Likewise.
* Add a test for profiling static executableH.J. Lu2017-10-141-1/+1
| | | | | | | | | | | | | | | | | | | | The function, main, is added to profiling output of static executable which must link against gcrt1.o. * Makeconfig (+link-static-before-libc): Use the first of $(CRT-$(@F)) and $(csu-objpfx)$(static-start-installed-name). * gmon/Makefile (tests): Add tst-gmon-static. (tests-static): Likewise. (CFLAGS-tst-gmon-static.c): New. (CRT-tst-gmon-static): Likewise. (DEFAULT-LDFLAGS-tst-gmon-static): Likewise. (tst-gmon-static-ENV): Likewise. (tests-special): Likewise. ($(objpfx)tst-gmon-static.out): Likewise. (clean-tst-gmon-static-data): Likewise. ($(objpfx)tst-gmon-static-gprof.out): Likewise. * gmon/tst-gmon-static-gprof.sh: New file. * gmon/tst-gmon-static.c: Likewise.
* Remove add-ons mechanism.Joseph Myers2017-10-051-22/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glibc has an add-ons mechanism to allow additional software to be integrated into the glibc build. Such add-ons may be within the glibc source tree, or outside it at a path passed to the --enable-add-ons configure option. localedata and crypt were once add-ons, distributed in separate release tarballs, but long since stopped using that mechanism. Linuxthreads was always an add-on. Ports spent some time as an add-on with separate release tarballs, then was first moved into the glibc source tree, then had its sysdeps files moved into the main sysdeps hierarchy so the add-ons mechanism was no longer used. NPTL spent some time as an add-on in the main glibc tree before stopping using the add-on mechanism. libidn used to have separate release tarballs but no longer does so, but still uses the add-ons mechanism within the glibc source tree. Various other software has supported building with the add-ons mechanism at times in the past, but I don't think any is still widely used. Add-ons involve significant, little-used complexity in the glibc build system, and make it hard to understand what the space of possible glibc configurations is. This patch removes the add-ons mechanism. libidn is now built via the Subdirs mechanism to cause any configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN (which effectively means shared libraries are available) is now defined via sysdeps/unix/inet/configure. Various references to add-ons around the source tree are removed (in the case of maint.texi, the example list of sysdeps directories is still very out of date). Externally maintained ports should now put their files in the normal sysdeps directory structure rather than being arranged as add-ons; they probably need to change e.g. elf.h anyway, rather than actually being able to work just as a drop-in subtree. Hurd libpthread should be arranged similarly to NPTL, so some files might go in a hurd-pthreads (or similar) top-level directory in glibc, while sysdeps files should go in the normal sysdeps directory structure (possibly in hurd or hurd-pthreads subdirectories, just as there are nptl subdirectories in the sysdeps tree). Tested for x86_64, and with build-many-glibcs.py. * configure.ac (--enable-add-ons): Remove option. (machine): Do not mention add-ons in comment. (LIBC_PRECONFIGURE): Likewise. (add_ons): Remove variable and sanity checks and logic to locate add-ons. (add_ons_automatic): Remove variable. (configured_add_ons): Likewise. (add_ons_sfx): Likewise. (add_ons_pfx): Likewise. (add_on_subdirs): Likewise. (sysnames_add_ons): Likewise. Remove loop over add-ons and consideration of add-ons in Implies handling. (sysdeps_add_ons): Likewise. * configure: Regenerated. * libidn/configure.ac: Remove. * libidn/configure: Likewise. * sysdeps/unix/inet/configure.ac: New file. * sysdeps/unix/inet/configure: New generated file. * sysdeps/unix/inet/Subdirs: Add libidn. * Makeconfig (sysdeps-srcdirs): Remove variable. (+sysdep_dirs): Do not include $(sysdeps-srcdirs). ($(common-objpfx)config.status): Do not depend on add-on files. ($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in comment. (all-subdirs): Do not include $(add-on-subdirs). * Makefile (dist-prepare): Do not use $(sysdeps-add-ons). * config.make.in (add-ons): Remove variable. (add-on-subdirs): Likewise. (sysdeps-add-ons): Likewise. * manual/Makefile (add-chapters): Remove. ($(objpfx)texis): Do not depend on $(add-chapters). (nonexamples): Do not handle $(add-chapters). (examples): Do not handle $(add-ons). (chapters.% top-menu.%): Do not pass '$(add-chapters)' to libc-texinfo.sh. * manual/install.texi (Installation): Do not mention add-ons. (--enable-add-ons): Do not document configure option. * INSTALL: Regenerated. * manual/libc-texinfo.sh: Do not handle $2 add-ons argument. * manual/maint.texi (Hierarchy Conventions): Do not mention add-ons. * scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use --enable-add-ons. * scripts/gen-sorted.awk: Do not handle Subdirs files from add-ons. * scripts/test-installation.pl: Do not handle glibc-compat add-on. * sysdeps/nptl/Makeconfig: Do not mention add-ons in comment.
* Use $(DEFAULT-LDFLAGS-$(@F)) in +link-static-before-libcH.J. Lu2017-10-041-0/+1
| | | | | | | | | | | | | | Use $(LDFLAGS-$(@F)) with tst-tls1-static-non-pie may not be sufficient when static PIE is built by default. Use $(DEFAULT-LDFLAGS-$(@F)) in +link-static-before-libc to make sure that tst-tls1-static-non-pie is always built as non-PIE static executable and make sure that crt1.o is used with tst-tls1-static-non-pie. * Makeconfig (+link-static-before-libc): Use $(DEFAULT-LDFLAGS-$(@F)). * elf/Makefile (CRT-tst-tls1-static-non-pie): New. (LDFLAGS-tst-tls1-static-non-pie): Renamed to ... (DEFAULT-LDFLAGS-tst-tls1-static-non-pie): This.
* Support mcount/gprof test with GCC defaulting to PIEH.J. Lu2017-08-171-1/+1
| | | | | | | The mcount/gprof test should be linked with gcrt1.o, not Scrt1.o. * Makeconfig (+link-pie-before-libc): Add CRT-* hook to override the startup object.
* gmon: Add test for basic mcount/gprof functionalityFlorian Weimer2017-08-151-1/+1
|
* Polish the treatment of dl-tunable-list.h in Makeconfig.Zack Weinberg2017-06-091-9/+12
| | | | | | | | | | | | | Like basically all before-compile headers, dl-tunable-list.h should be generated using a stamp file to minimize unnecessary rebuilding; it wasn't being added to common-generated, so it wouldn't get cleaned up; and it was in between the rules for libc-modules.h/.stmp and their own addition to common-generated. * Makeconfig (dl-tunable-list.h): Generate using a stamp file. (common-generated): Add libc-modules.h and libc-modules.stmp in a more appropriate location. Also add dl-tunable-list.h and dl-tunable-list.stmp.
* Support dl-tunables.list in subdirectoriesH.J. Lu2017-05-251-1/+3
| | | | | | | | We can put processor specific tunables in dl-tunables.list under sysdeps instead of in elf/dl-tunables.list. * Makeconfig ($(common-objpfx)dl-tunable-list.h): Also check dl-tunables.list in subdirectories.
* Suppress internal declarations for most of the testsuite.Zack Weinberg2017-05-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new build module called 'testsuite'. IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus (which means several ad-hoc tests for __cplusplus can go away). libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is defined; in particular, _ISOMAC mode does not get config.h automatically anymore. There are still quite a few tests that need to see internal gunk of one variety or another. For them, we now have 'tests-internal' and 'test-internal-extras'; files in this category will still be compiled with MODULE_NAME=nonlib, and everything proceeds as it always has. The bulk of this patch is moving tests from 'tests' to 'tests-internal'. There is also 'tests-static-internal', which has the same effect on files in 'tests-static', and 'modules-names-tests', which has the *inverse* effect on files in 'modules-names' (it's inverted because most of the things in modules-names are *not* tests). For both of these, the file must appear in *both* the new variable and the old one. There is also now a special case for when libc-symbols.h is included without MODULE_NAME being defined at all. (This happens during the creation of libc-modules.h, and also when preprocessing Versions files.) When this happens, IS_IN is set to be always false and _ISOMAC is *not* defined, which was the status quo, but now it's explicit. The remaining changes to C source files in this patch seemed likely to cause problems in the absence of the main change. They should be relatively self-explanatory. In a few cases I duplicated a definition from an internal header rather than move the test to tests-internal; this was a judgement call each time and I'm happy to change those however reviewers feel is more appropriate. * Makerules: New subdir configuration variables 'tests-internal' and 'test-internal-extras'. Test files in these categories will still be compiled with MODULE_NAME=nonlib. Test files in the existing categories (tests, xtests, test-srcs, test-extras) are now compiled with MODULE_NAME=testsuite. New subdir configuration variable 'modules-names-tests'. Files which are in both 'modules-names' and 'modules-names-tests' will be compiled with MODULE_NAME=testsuite instead of MODULE_NAME=extramodules. (gen-as-const-headers): Move to tests-internal. (do-tests-clean, common-mostlyclean): Support tests-internal. * Makeconfig (built-modules): Add testsuite. * Makefile: Change libof-check-installed-headers-c and libof-check-installed-headers-cxx to 'testsuite'. * Rules: Likewise. Support tests-internal. * benchtests/strcoll-inputs/filelist#en_US.UTF-8: Remove extra-modules.mk. * config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here. * include/libc-symbols.h: Move definitions of _GNU_SOURCE, PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the very top of the file and rationalize their order. If MODULE_NAME is not defined at all, define IS_IN to always be false, and don't define _ISOMAC. If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are true, define _ISOMAC and suppress everything else in this file, starting with the inclusion of config.h. Do check for inappropriate definitions of __OPTIMIZE__ and __FAST_MATH__ here, but only if _ISOMAC is not defined. Correct some out-of-date commentary. * include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE and _Mlong_double_ before including math.h. * include/string.h: If _ISOMAC is defined, don't expose _STRING_ARCH_unaligned. Move a comment to a more appropriate location. * include/errno.h, include/stdio.h, include/stdlib.h, include/string.h * include/time.h, include/unistd.h, include/wchar.h: No need to check __cplusplus nor use __BEGIN_DECLS/__END_DECLS. * misc/sys/cdefs.h (__NTHNL): New macro. * sysdeps/m68k/m680x0/fpu/bits/mathinline.h (__m81_defun): Use __NTHNL to avoid errors with GCC 6. * elf/tst-env-setuid-tunables.c: Include config.h with _LIBC defined, for HAVE_TUNABLES. * inet/tst-checks-posix.c: No need to define _ISOMAC. * intl/tst-gettext2.c: Provide own definition of N_. * math/test-signgam-finite-c99.c: No need to define _ISOMAC. * math/test-signgam-main.c: No need to define _ISOMAC. * stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to... * stdlib/tst-strtod1i.c: ...this new file. * stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice. Split tests of __strtod_internal to... * stdlib/tst-strtod5i.c: ...this new file. * string/test-string.h: Include stdint.h. Duplicate definition of inhibit_loop_to_libcall here (from libc-symbols.h). * string/test-strstr.c: Provide dummy definition of libc_hidden_builtin_def when including strstr.c. * sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC mode; no need to test __STRICT_ANSI__ nor __cplusplus as well. * sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h. Don't include init-arch.h. * sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h. Don't include init-arch.h. * elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static, tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest, unload, unload2, circleload1, neededtest, neededtest2, neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3, tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1, tst-stackguard1, tst-_dl_addr_inside_object, and all of the ifunc tests to tests-internal. Don't add $(modules-names) to test-extras. * inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal. Add tst-deadline to tests-static-internal. * malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to tests-internal. * misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal. * nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11, tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3, tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static, tst-sem12-static, and tst-stackguard1-static to tests-internal. Link tests-internal with libpthread also. Don't add $(modules-names) to test-extras. * nss/Makefile: Move tst-field to tests-internal. * posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33, tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal. * stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4, tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to tests-internal. * sunrpc/Makefile: Move tst-svc_register to tests-internal. * sysdeps/powerpc/Makefile: Move test-get_hwcap and test-get_hwcap-static to tests-internal. * sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to tests-internal. * sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to modules-names-tests.
* Document and fix --enable-bind-now [BZ #21015]Florian Weimer2017-03-021-0/+7
|
* Update copyright dates with scripts/update-copyrights.Joseph Myers2017-01-011-1/+1
|
* Enhance --enable-tunables to select tunables frontend at build timeSiddhesh Poyarekar2016-12-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the GNU Tools Cauldron 2016, the state of the current tunables patchset was considered OK with the addition of a way to select the frontend to be used for the tunables. That is, to avoid being locked in to one type of frontend initially, it should be possible to build tunables with a different frontend with something as simple as a configure switch. To that effect, this patch enhances the --enable-tunables option to accept more values than just 'yes' or 'no'. The current frontend (and default when enable-tunables is 'yes') is called 'valstring', to select the frontend where a single environment variable is set to a colon-separated value string. More such frontends can be added in future. * Makeconfig (have-tunables): Check for non-negative instead of positive. * configure.ac: Add 'valstring' as a valid value for --enable-tunables. * configure: Regenerate. * elf/Makefile (have-tunables): Check for non-negative instead of positive. (CPPFLAGS-dl-tunables.c): Define TUNABLES_FRONTEND for dl-tunables.c. * elf/dl-tunables.c (GLIBC_TUNABLES): Define only when TUNABLES_FRONTEND == TUNABLES_FRONTEND_valstring. (tunables_strdup): Likewise. (disable_tunables): Likewise. (parse_tunables): Likewise. (__tunables_init): Process GLIBC_TUNABLES envvar only when. TUNABLES_FRONTEND == TUNABLES_FRONTEND_valstring. * elf/dl-tunables.h (TUNABLES_FRONTEND_valstring): New macro. (TUNABLES_FRONTEND_yes): New macro, define as TUNABLES_FRONTEND_valstring by default. * manual/install.texi: Document new acceptable values for --enable-tunables. * INSTALL: Regenerate.
* Add framework for tunablesSiddhesh Poyarekar2016-12-311-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tunables framework allows us to uniformly manage and expose global variables inside glibc as switches to users. tunables/README has instructions for glibc developers to add new tunables. Tunables support can be enabled by passing the --enable-tunables configure flag to the configure script. This patch only adds a framework and does not pose any limitations on how tunable values are read from the user. It also adds environment variables used in malloc behaviour tweaking to the tunables framework as a PoC of the compatibility interface. * manual/install.texi: Add --enable-tunables option. * INSTALL: Regenerate. * README.tunables: New file. * Makeconfig (CPPFLAGS): Define TOP_NAMESPACE. (before-compile): Generate dl-tunable-list.h early. * config.h.in: Add HAVE_TUNABLES. * config.make.in: Add have-tunables. * configure.ac: Add --enable-tunables option. * configure: Regenerate. * csu/init-first.c (__libc_init_first): Move __libc_init_secure earlier... * csu/init-first.c (LIBC_START_MAIN):... to here. Include dl-tunables.h, libc-internal.h. (LIBC_START_MAIN) [!SHARED]: Initialize tunables for static binaries. * elf/Makefile (dl-routines): Add dl-tunables. * elf/Versions (ld): Add __tunable_set_val to GLIBC_PRIVATE namespace. * elf/dl-support (_dl_nondynamic_init): Unset MALLOC_CHECK_ only when !HAVE_TUNABLES. * elf/rtld.c (process_envvars): Likewise. * elf/dl-sysdep.c [HAVE_TUNABLES]: Include dl-tunables.h (_dl_sysdep_start): Call __tunables_init. * elf/dl-tunable-types.h: New file. * elf/dl-tunables.c: New file. * elf/dl-tunables.h: New file. * elf/dl-tunables.list: New file. * malloc/tst-malloc-usable-static.c: New test case. * malloc/Makefile (tests-static): Add it. * malloc/arena.c [HAVE_TUNABLES]: Include dl-tunables.h. Define TUNABLE_NAMESPACE. (DL_TUNABLE_CALLBACK (set_mallopt_check)): New function. (DL_TUNABLE_CALLBACK_FNDECL): New macro. Use it to define callback functions. (ptmalloc_init): Set tunable values. * scripts/gen-tunables.awk: New file. * sysdeps/mach/hurd/dl-sysdep.c: Include dl-tunables.h. (_dl_sysdep_start): Call __tunables_init.
* Enable -fstack-protector=* when requested by configure [BZ #7065]Nick Alcock2016-12-261-1/+7
|
* Expose linking against libsupport as make dependencyFlorian Weimer2016-12-131-6/+5
| | | | This ensures that tests are rebuilt when libsupport changes.
* support: Introduce new subdirectory for test infrastructureFlorian Weimer2016-12-091-8/+18
| | | | | | | | | | | | | | | The new test driver in <support/test-driver.c> has feature parity with the old one. The main difference is that its hooking mechanism is based on functions and function pointers instead of macros. This commit also implements a new environment variable, TEST_COREDUMPS, which disables the code which disables coredumps (that is, it enables them if the invocation environment has not disabled them). <test-skeleton.c> defines wrapper functions so that it is possible to use existing macros with the new-style hook functionality. This commit changes only a few test cases to the new test driver, to make sure that it works as expected.
* Add pretty printers for the NPTL lock typesMartin Galvan2016-12-081-17/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds pretty printers for the following NPTL types: - pthread_mutex_t - pthread_mutexattr_t - pthread_cond_t - pthread_condattr_t - pthread_rwlock_t - pthread_rwlockattr_t To load the pretty printers into your gdb session, do the following: python import sys sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers') end source /path/to/glibc/source/pretty-printers/nptl-printers.py You can check which printers are registered and enabled by issuing the 'info pretty-printer' gdb command. Printers should trigger automatically when trying to print a variable of one of the types mentioned above. The printers are architecture-independent, and were tested on an AMD64 running Ubuntu 14.04 and an x86 VM running Fedora 24. In order to work, the printers need to know the values of various flags that are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since replicating these constants in the printers file itself would create a maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses to extract the constants. This script is pretty much the same as gen-as-const.awk, except it doesn't cast the constant values to 'long' and is thorougly documented. The constants need only to be enumerated in a .pysym file, which is then referenced by a Make variable called gen-py-const-headers. As for the install directory, I discussed this with Mike Frysinger and Siddhesh Poyarekar, and we agreed that it can be handled in a separate patch, and shouldn't block merging of this one. In addition, I've written a series of test cases for the pretty printers. Each lock type (mutex, condvar and rwlock) has two test programs, one for itself and other for its related 'attributes' object. Each test program in turn has a PExpect-based Python script that drives gdb and compares its output to the expected printer's. The tests run on the glibc host, which is assumed to have both gdb and PExpect; if either is absent the tests will fail with code 77 (UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper. I've tested the printers on both native builds and a cross build using a Beaglebone Black running Debian, with the build system's filesystem shared with the board through NFS. Finally, I've written a README that explains all this and more. * INSTALL: Regenerated. * Makeconfig: Add comments and whitespace to make the control flow clearer. (+link-printers-tests, +link-pie-printers-tests, CFLAGS-printers-tests, installed-rtld-LDFLAGS, built-rtld-LDFLAGS, link-libc-rpath, link-libc-tests-after-rpath-link, link-libc-printers-tests): New. (rtld-LDFLAGS, rtld-tests-LDFLAGS, link-libc-tests-rpath-link, link-libc-tests): Use the new variables as required. * Makerules ($(py-const)): New rule. generated: Add $(py-const). * README.pretty-printers: New file. * Rules (tests-printers-programs, tests-printers-out, py-env): New. (others): Depend on $(py-const). (tests): Depend on $(tests-printers-programs) or $(tests-printers-out), as required. Pass $(tests-printers) to merge-test-results.sh. * manual/install.texi: Add requirements for testing the pretty printers. * nptl/Makefile (gen-py-const-headers, pretty-printers, tests-printers, CFLAGS-test-mutexattr-printers.c CFLAGS-test-mutex-printers.c, CFLAGS-test-condattr-printers.c, CFLAGS-test-cond-printers.c, CFLAGS-test-rwlockattr-printers.c CFLAGS-test-rwlock-printers.c, tests-printers-libs): Define. * nptl/nptl-printers.py: New file. * nptl/nptl_lock_constants.pysym: Likewise. * nptl/test-cond-printers.c: Likewise. * nptl/test-cond-printers.py: Likewise. * nptl/test-condattr-printers.c: Likewise. * nptl/test-condattr-printers.py: Likewise. * nptl/test-mutex-printers.c: Likewise. * nptl/test-mutex-printers.py: Likewise. * nptl/test-mutexattr-printers.c: Likewise. * nptl/test-mutexattr-printers.py: Likewise. * nptl/test-rwlock-printers.c: Likewise. * nptl/test-rwlock-printers.py: Likewise. * nptl/test-rwlockattr-printers.c: Likewise. * nptl/test-rwlockattr-printers.py: Likewise. * scripts/gen-py-const.awk: Likewise. * scripts/test_printers_common.py: Likewise. * scripts/test_printers_exceptions.py: Likewise.
* Generate .op pattern rules for profiling builds onlyFlorian Weimer2016-09-211-1/+3
| | | | | | | .op pattern rules are not used in non-profiling builds. This does not cause any changes to both profiling and non-profiling builds.
* Remove remnants of .og patternsFlorian Weimer2016-09-201-1/+1
| | | | | | | | | | | This was used by --enable-omitfp, and the bulk of it was removed in this commit: commit bdeba1354b7364d9b7857a048286a71ddbcdff86 Author: Ulrich Drepper <drepper@gmail.com> Date: Sat Jan 7 11:29:31 2012 -0500 Remove --enable-omitfp support
* Revert "Add pretty printers for the NPTL lock types"Siddhesh Poyarekar2016-07-111-13/+1
| | | | | | | | | | | | | | | | This reverts commit 62ce266b0b261def2c6329be9814ffdcc11964d6. The change is not mature enough because it needs the following fixes: 1. Redirect test output to a file like other tests 2. Eliminate the need to use a .gdbinit because distributions will break without it. I should have caught that but I was in too much of a hurry to get the patch in :/ 3. Feature checking during configure to determine things like minimum required gdb version, python-pexpect version, etc. to make sure that tests work correctly.
* Add pretty printers for the NPTL lock typesMartin Galvan2016-07-081-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds pretty printers for the following NPTL types: - pthread_mutex_t - pthread_mutexattr_t - pthread_cond_t - pthread_condattr_t - pthread_rwlock_t - pthread_rwlockattr_t To load the pretty printers into your gdb session, do the following: python import sys sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers') end source /path/to/glibc/source/pretty-printers/nptl-printers.py You can check which printers are registered and enabled by issuing the 'info pretty-printer' gdb command. Printers should trigger automatically when trying to print a variable of one of the types mentioned above. The printers are architecture-independent, and were manually tested on both the gdb CLI and Eclipse CDT. In order to work, the printers need to know the values of various flags that are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since replicating these constants in the printers file itself would create a maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses to extract the constants. This script is pretty much the same as gen-as-const.awk, except it doesn't cast the constant values to 'long' and is thorougly documented. The constants need only to be enumerated in a .pysym file, which is then referenced by a Make variable called gen-py-const-headers. As for the install directory, I discussed this with Mike Frysinger and Siddhesh Poyarekar, and we agreed that it can be handled in a separate patch, and it shouldn't block merging of this one. In addition, I've written a series of test cases for the pretty printers. Each lock type (mutex, condvar and rwlock) has two test programs, one for itself and other for its related 'attributes' object. Each test program in turn has a PExpect-based Python script that drives gdb and compares its output to the expected printer's. The tests run on the glibc host, which is assumed to have both gdb and PExpect; if either is absent the tests will fail with code 77 (UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper. I've tested the printers on both a native build and a cross build using a Beaglebone Black, with the build system's filesystem shared with the board through NFS. Finally, I've written a README that explains all this and more. Hopefully this should be good to go in now. Thanks. ChangeLog: 2016-07-04 Martin Galvan <martin.galvan@tallertechnologies.com> * Makeconfig (build-hardcoded-path-in-tests): Set to 'yes' for shared builds if tests-need-hardcoded-path is defined. (all-subdirs): Add pretty-printers. * Makerules ($(py-const)): New rule. * Rules (others): Add $(py-const), if defined. * nptl/Makefile (gen-py-const-headers): Define. * nptl/nptl-printers.py: New file. * nptl/nptl_lock_constants.pysym: Likewise. * pretty-printers/Makefile: Likewise. * pretty-printers/README: Likewise. * pretty-printers/test-condvar-attributes.c: Likewise. * pretty-printers/test-condvar-attributes.p: Likewise. * pretty-printers/test-condvar-printer.c: Likewise. * pretty-printers/test-condvar-printer.py: Likewise. * pretty-printers/test-mutex-attributes.c: Likewise. * pretty-printers/test-mutex-attributes.py: Likewise. * pretty-printers/test-mutex-printer.c: Likewise. * pretty-printers/test-mutex-printer.py: Likewise. * pretty-printers/test-rwlock-attributes.c: Likewise. * pretty-printers/test-rwlock-attributes.py: Likewise. * pretty-printers/test-rwlock-printer.c: Likewise. * pretty-printers/test-rwlock-printer.py: Likewise. * pretty-printers/test_common.py: Likewise. * scripts/gen-py-const.awk: Likewise.
* Make copies of cstdlib/cmath and use them [BZ #20314]H.J. Lu2016-07-051-1/+2
| | | | | | | | | | | | | | | | | | | If C++ headers <cstdlib> or <cmath> are used, GCC 6 will include /usr/include/stdlib.h or /usr/include/math.h from "#include_next" (instead of stdlib/stdlib.h or math/math.h in the glibc source directory), and this turns up as a make dependency. An implicit rule will kick in and make will try to install stdlib/stdlib.h or math/math.h as /usr/include/stdlib.h or /usr/include/math.h because the target is out of date. We make a copy of <cstdlib> and <cmath> in the glibc build directory so that stdlib/stdlib.h and math/math.h will be used instead of /usr/include/stdlib.h and /usr/include/math.h. [BZ #20314] * Makeconfig (CXXFLAGS): Prepend -I$(common-objpfx). * Makerules (before-compile): Add $(common-objpfx)cstdlib and $(common-objpfx)cmath. ($(common-objpfx)cstdlib): New target. ($(common-objpfx)cmath): Likewise.
* Enable --localedir to set message catalog directory (Bug 14259)Carlos O'Donell2016-02-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 1999 the project split "localedir" into "localedir" (path to compiled locale archives) and "msgcatdir" (path to message catalogs). This predates the 2002 change in the GNU Coding Standard to document the use of "localedir" for the path to the message catalogs. It appears that newlib, gcc, and several other projects also used "msgcatdir" at one point or another in the past, and so it is in line with historical precedent that glibc would also use "msgcatdir." However, given that the GNU Coding Standard uses "localedir", we will switch to that for consistency as a GNU project. Previous uses of --localdir didn't work anyway (see bug 14259). I am committing this patch in the understanding that nobody would object to fixing #14259 as part of aligning our variable usage to the GNU Coding Standard. Given that previous "localedir" uses were converted to "complocaledir" by [1], we can now convert "msgcatdir" to "localedir" and complete the transition. With an addition to config.make.in we also fix bug 14259 and allow users to specify the locale dependent data directory with "--localedir" at configure time. There is still no way to control at configure time the location of the *compiled* locale directory. Tested on x86_64 with no regressions. Tested using "--localedir" to specify alternate locale dependent data directory and verified with "make install DESTDIR=/tmp/glibc". [1] 90fe682d3067163aa773feecf497ef599429457a
* Update copyright dates with scripts/update-copyrights.Joseph Myers2016-01-041-1/+1
|
* Rename localedir to complocaledir (bug 14259).Carlos O'Donell2015-11-271-4/+5
| | | | | | | In preparation to fix the --localedir configure argument we must move the existing conflicting definition of localedir to a more appropriate name. Given that all current internal uses of localedir relate to the compiled locales we rename to complocaledir.
* Use -std=gnu11 instead of -std=gnu99.Joseph Myers2015-10-271-1/+1
| | | | | | | | | | | | | | | | | | | | Now that GCC 4.7 or later is required to build glibc, this patch moves the build from using -std=gnu99 to -std=gnu11 (option added in 4.7). This allows use of C11 features from GCC's headers, such as new float.h macros and max_align_t. Tested for x86_64 and x86 (testsuite; installed stripped shared libraries are unchanged by the patch on x86_64, while I see some slight code reordering of no significance on x86). * Makeconfig (CFLAGS): Use -std=gnu11 instead of -std=gnu99. * Makefile ($(objpfx)c++-types-check.out): Filter out -std=gnu11 instead of -std=gnu99. * configure.ac (systemtap): Test with -std=gnu11 instead of -std=gnu99. * configure: Regenerated. * math/gen-auto-libm-tests.c: Use -std=gnu11 instead of -std=gnu99 in compilation command in comment.
* Remove configure test for needing -P for .S files.Joseph Myers2015-10-271-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a configure test for "whether we need to use -P to assemble .S files". I think this test is long obsolete. I don't have a specific reference to a binutils change or version that obsoleted this test, but: (a) we only support GNU binutils; (b) it looks like every architecture supported by glibc has '#' as a line comment character in its gas port; (c) in any case, if the (compiler, assembler) combination in use cannot compile a .S file without special options, that would clearly be a substantially broken combination, which I don't think we need to allow for at all. The test in question was added by: Thu Jan 27 16:46:03 1994 Roland McGrath (roland@churchy.gnu.ai.mit.edu) * configure.in (asm-CPPFLAGS): Add new check to see if assembling a .S file loses without -P. If so, set asm-CPPFLAGS=-P in config.make. This patch removes the test and the reference to this issue in the comment on the default empty definition of asm-CPPFLAGS. (Various other settings of asm-CPPFLAGS remain in sysdeps Makefile fragments.) Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_need_minus_P): Remove configure test. * configure: Regenerated. * Makeconfig (asm-CPPFLAGS): Remove reference to -P in comment.
* Use -Wold-style-definition.Joseph Myers2015-10-211-1/+1
| | | | | | | | | | | | | | | This patch makes glibc build with -Wold-style-definition to avoid old-style function definitions creeping back in by accident. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). Also tested build for arm, mips64 and powerpc32. Hopefully there aren't any remaining system-specific files with old-style definitions whose formatting evaded my searches, but if there are, they will be easy to fix. * Makeconfig (+gccwarn-c): Add -Wold-style-definition. * Makefile ($(objpfx)c++-types-check.out): Filter out $(+gccwarn-c) instead of -Wstrict-prototypes.
* Remove -fgnu89-inline configure test.Joseph Myers2015-10-191-1/+1
| | | | | | | | | | | | | | There is a configure test for -fgnu89-inline. This option was added in GCC 4.2, so the test is obsolete; this patch removes it. Tested for x86_64 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_gnu89_inline): Remove configure test. * configure: Regenerated. * config.make.in (gnu89-inline-CFLAGS): Remove variable. * Makeconfig (CFLAGS): Use -fgnu89-inline instead of $(gnu89-inline-CFLAGS).
* Remove -fexceptions configure test.Joseph Myers2015-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a configure test for -fexceptions. This option was added in GCC 2.8, so the test is obsolete - and indeed plenty of code is using -fexceptions directly. This patch removes the configure test and makes all uses of $(exceptions) use -fexceptions directly. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_gcc_exceptions): Remove configure test. * configure: Regenerated. * sysdeps/arm/configure.ac (libc_cv_gcc_exceptions): Do not set variable. (exceptions): Likewise. * sysdeps/arm/configure: Regenerated. * config.make.in (exceptions): Remove variable. * Makeconfig (uses-callbacks): Use -fexceptions instead of $(exceptions). * debug/Makefile (CFLAGS-dprintf_chk.c): Likewise. (CFLAGS-vdprintf_chk.c): Likewise. (CFLAGS-printf_chk.c): Likewise. (CFLAGS-fprintf_chk.c): Likewise. (CFLAGS-vprintf_chk.c): Likewise. (CFLAGS-vfprintf_chk.c): Likewise. (CFLAGS-gets_chk.c): Likewise. (CFLAGS-fgets_chk.c): Likewise. (CFLAGS-fgets_u_chk.c): Likewise. (CFLAGS-fread_chk.c): Likewise. (CFLAGS-fread_u_chk.c): Likewise. (CFLAGS-wprintf_chk.c): Likewise. (CFLAGS-fwprintf_chk.c): Likewise. (CFLAGS-vwprintf_chk.c): Likewise. (CFLAGS-vfwprintf_chk.c): Likewise. (CFLAGS-fgetws_chk.c): Likewise. (CFLAGS-fgetws_u_chk.c): Likewise. * libio/Makefile (CFLAGS-fileops.c): Likewise. (CFLAGS-fputc.c): Likewise. (CFLAGS-fputwc.c): Likewise. (CFLAGS-freopen64.c): Likewise. (CFLAGS-freopen.c): Likewise. (CFLAGS-fseek.c): Likewise. (CFLAGS-fseeko64.c): Likewise. (CFLAGS-fseeko.c): Likewise. (CFLAGS-ftello64.c): Likewise. (CFLAGS-ftello.c): Likewise. (CFLAGS-fwide.c): Likewise. (CFLAGS-genops.c): Likewise. (CFLAGS-getc.c): Likewise. (CFLAGS-getchar.c): Likewise. (CFLAGS-getwc.c): Likewise. (CFLAGS-getwchar.c): Likewise. (CFLAGS-iofclose.c): Likewise. (CFLAGS-iofflush.c): Likewise. (CFLAGS-iofgetpos64.c): Likewise. (CFLAGS-iofgetpos.c): Likewise. (CFLAGS-iofgets.c): Likewise. (CFLAGS-iofgetws.c): Likewise. (CFLAGS-iofputs.c): Likewise. (CFLAGS-iofputws.c): Likewise. (CFLAGS-iofread.c): Likewise. (CFLAGS-iofsetpos64.c): Likewise. (CFLAGS-iofsetpos.c): Likewise. (CFLAGS-ioftell.c): Likewise. (CFLAGS-iofwrite.c): Likewise. (CFLAGS-iogetdelim.c): Likewise. (CFLAGS-iogetline.c): Likewise. (CFLAGS-iogets.c): Likewise. (CFLAGS-iogetwline.c): Likewise. (CFLAGS-ioputs.c): Likewise. (CFLAGS-ioseekoff.c): Likewise. (CFLAGS-ioseekpos.c): Likewise. (CFLAGS-iosetbuffer.c): Likewise. (CFLAGS-iosetvbuf.c): Likewise. (CFLAGS-ioungetc.c): Likewise. (CFLAGS-ioungetwc.c): Likewise. (CFLAGS-oldfileops.c): Likewise. (CFLAGS-oldiofclose.c): Likewise. (CFLAGS-oldiofgetpos64.c): Likewise. (CFLAGS-oldiofgetpos.c): Likewise. (CFLAGS-oldiofsetpos64.c): Likewise. (CFLAGS-oldiofsetpos.c): Likewise. (CFLAGS-peekc.c): Likewise. (CFLAGS-putc.c): Likewise. (CFLAGS-putchar.c): Likewise. (CFLAGS-putwc.c): Likewise. (CFLAGS-putwchar.c): Likewise. (CFLAGS-rewind.c): Likewise. (CFLAGS-wfileops.c): Likewise. (CFLAGS-wgenops.c): Likewise. (CFLAGS-oldiofopen.c): Likewise. (CFLAGS-iofopen.c): Likewise. (CFLAGS-iofopen64.c): Likewise. (CFLAGS-oldtmpfile.c): Likewise. * stdio-common/Makefile (CFLAGS-vfprintf.c): Likewise. (CFLAGS-fprintf.c): Likewise. (CFLAGS-printf.c): Likewise. (CFLAGS-vfwprintf.c): Likewise. (CFLAGS-vfscanf.c): Likewise. (CFLAGS-vfwscanf.c): Likewise. (CFLAGS-fscanf.c): Likewise. (CFLAGS-scanf.c): Likewise. (CFLAGS-isoc99_vfscanf.c): Likewise. (CFLAGS-isoc99_vscanf.c): Likewise. (CFLAGS-isoc99_fscanf.c): Likewise. (CFLAGS-isoc99_scanf.c): Likewise. * wcsmbs/Makefile (CFLAGS-isoc99_wscanf.c): Likewise. (CFLAGS-isoc99_fwscanf.c): Likewise. (CFLAGS-isoc99_vwscanf.c): Likewise. (CFLAGS-isoc99_vfwscanf.c): Likewise.