about summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
...
* wordexp: handle overflow in positional parameter number (bug 28011)Andreas Schwab2021-06-272-1/+2
| | | | Use strtoul instead of atoi so that overflow can be detected.
* Update math: redirect roundeven functionH.J. Lu2021-06-275-2/+5
| | | | | Redirect target specific roundeven functions for aarch64, ldbl-128ibm and riscv.
* Use GCC builtins for roundeven functions if desired.Shen-Ta Hsieh2021-06-276-0/+22
| | | | | | | | | | | | | This patch is using the corresponding GCC builtin for roundevenf, roundeven and roundevenl if the USE_FUNCTION_BUILTIN macros are defined to one in math-use-builtins.h. These builtin functions is supported since GCC 10. The code of the generic implementation is not changed. Signed-off-by: Shen-Ta Hsieh <ibmibmibm.tw@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86_64: roundeven with sse4.1 supportShen-Ta Hsieh2021-06-277-2/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the sse4.1 hardware floating point roundeven. Here is some benchmark results on my systems: =AMD Ryzen 9 3900X 12-Core Processor= * benchmark result before this commit | | roundeven | roundevenf | |------------|--------------|--------------| | duration | 3.75587e+09 | 3.75114e+09 | | iterations | 3.93053e+08 | 4.35402e+08 | | max | 52.592 | 58.71 | | min | 7.98 | 7.22 | | mean | 9.55563 | 8.61535 | * benchmark result after this commit | | roundeven | roundevenf | |------------|---------------|--------------| | duration | 3.73815e+09 | 3.73738e+09 | | iterations | 5.82692e+08 | 5.91498e+08 | | max | 56.468 | 51.642 | | min | 6.27 | 6.156 | | mean | 6.41532 | 6.3185 | =Intel(R) Pentium(R) CPU D1508 @ 2.20GHz= * benchmark result before this commit | | roundeven | roundevenf | |------------|--------------|--------------| | duration | 2.18208e+09 | 2.18258e+09 | | iterations | 2.39932e+08 | 2.46924e+08 | | max | 96.378 | 98.035 | | min | 6.776 | 5.94 | | mean | 9.09456 | 8.83907 | * benchmark result after this commit | | roundeven | roundevenf | |------------|--------------|--------------| | duration | 2.17415e+09 | 2.17005e+09 | | iterations | 3.56193e+08 | 4.09824e+08 | | max | 51.693 | 97.192 | | min | 5.926 | 5.093 | | mean | 6.10385 | 5.29507 | Signed-off-by: Shen-Ta Hsieh <ibmibmibm.tw@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* math: redirect roundeven functionShen-Ta Hsieh2021-06-276-2/+10
| | | | | | | This patch redirect roundeven function for futhermore changes. Signed-off-by: Shen-Ta Hsieh <ibmibmibm.tw@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* Linux: Move timer helper routines from librt to libcFlorian Weimer2021-06-257-50/+64
| | | | | | | | | | | | This adds several temporary GLIBC_PRIVATE exports. The symbol names are changed so that they all start with __timer_. It is now possible to invoke the fork handler directly, so pthread_atfork is no longer necessary. The associated error cannot happen anymore, and cancellation handling can be removed from the helper thread routine. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Linux: Move mq_unlink from librt to libcFlorian Weimer2021-06-2566-34/+100
| | | | | | | | The symbol was moved using scripts/move-symbol-to-libc.py. A placeholder symbol is needed on some architectures for the GLIBC_2.3.4 version. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* Linux: Move mq_send, mq_timedsend, __mq_timedsend_time64 to libcFlorian Weimer2021-06-2568-99/+196
| | | | | | The symbols were moved using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* Linux: Move mq_receive, mq_timedreceive, __mq_timedreceive_time64 to libcFlorian Weimer2021-06-2568-97/+200
| | | | | | The symbols were moved using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* Linux: Move mq_open, __mq_open_2 from librt to libcFlorian Weimer2021-06-2566-64/+178
| | | | | | | The symbols were moved using scripts/move-symbol-to-libc.py. A placeholder symbol is required to keep the GLIBC_2.7 version. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* Linux: Move mq_notify from librt to libcFlorian Weimer2021-06-2568-68/+101
| | | | | | | | | The symbol was moved using scripts/move-symbol-to-libc.py. An explicit call from fork into the mq_notify implementation replaces the previous use of pthread_atfork. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* Linux: Move mq_getattr from librt to libcFlorian Weimer2021-06-2565-33/+75
| | | | | | The symbol was moved using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* Linux: Move mq_setattr from librt to libcFlorian Weimer2021-06-2567-34/+108
| | | | | | | | | The symbol was moved using scripts/move-symbol-to-libc.py. To introduce the proper symbol versioning, the implementation of the system call wrapper us moved to a C file. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* Linux: Move mq_close from librt to libcFlorian Weimer2021-06-2565-32/+79
| | | | | | The symbol was moved using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* Linux: Move lio_listio, lio_listio64 from librt to libcFlorian Weimer2021-06-2566-105/+248
| | | | | | | | The symbols were moved using scripts/move-symbol-to-libc.py. Placeholder symbols are needed on some architectures, to keep the GLIBC_2.1 and GLIBC_2.4 symbol versions around. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* rt: Rework lio_listio implementationFlorian Weimer2021-06-255-259/+287
| | | | | | | | Move the common code into rt/lio_listio-common.c and include the file in both rt/lio_listio.c and rt/lio_listio64.c. The common code automatically defines both public symbols for __WORDSIZE == 64. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* Linux: Move aio_write, aio_write64 into libcFlorian Weimer2021-06-2568-79/+181
| | | | | | | | | | | Both symbols have to be moved at the same time because they are intertwined for __WORDSIZE == 64. The treatment of this case is also changed to match more closely how the other files suppress the declaration of the *64 identifier. The symbols were moved using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* Linux: Move aio_suspend, aio_suspend64, __aio_suspend_time64 to libcFlorian Weimer2021-06-2567-90/+197
| | | | | | | | | | | The symbols were moved using scripts/move-symbol-to-libc.py. There is a minor oddity here: This is generic code shared with Hurd, and Hurd does not have time64 support. This is why the versioned_symbol export for __aio_suspend_time64 is restricted to the PTHREAD_IN_LIBC code. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* Linux: Move aio_return, aio_return64 into libcFlorian Weimer2021-06-2565-64/+147
| | | | | | The symbols were moved using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerva Zanella <adhemerval.zanella@linaro.org>
* Linux: Move aio_read, aio_read64 into libcFlorian Weimer2021-06-2568-78/+180
| | | | | | | | | | | Both symbols have to be moved at the same time because they are intertwined for __WORDSIZE == 64. The treatment of this case is also changed to match more closely how the other files suppress the declaration of the *64 identifier. The symbols were moved using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Linux: Move aio_fsync, aio_fsync64 into libcFlorian Weimer2021-06-2565-67/+147
| | | | | | The symbols were moved using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Linux: Move aio_error, aio_error64 into libcFlorian Weimer2021-06-2565-67/+150
| | | | | | The symbols were moved using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Linux: Move aio_cancel, aio_cancel64 into libcFlorian Weimer2021-06-2572-103/+284
| | | | | | | | | The symbols were moved using scripts/move-symbol-to-libc.py. A version placeholder symbol is needed on alpha and sparc because of the additional symbols formerly at version GLIBC_2.3. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>:
* Linux: Move aio_init from librt into libcFlorian Weimer2021-06-2573-93/+222
| | | | | | | | | This commit also moves the aio_misc and aio_sigquue helper, so GLIBC_PRIVATE exports need to be added. The symbol was moved using scripts/move-symbol-to-libc.py. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* support: Fix xclone build failures on ia64 and hppaFlorian Weimer2021-06-251-4/+3
|
* elf: Disable most of TLS modid gaps processing [BZ #27135]Florian Weimer2021-06-253-6/+15
| | | | | | | | | | | | | Revert "elf: Fix DTV gap reuse logic [BZ #27135]" This reverts commit 572bd547d57a39b6cf0ea072545dc4048921f4c3. It turns out that the _dl_next_tls_modid in _dl_map_object_from_fd keeps returning the same modid over and over again if there is a gap and more than TLS-using module is loaded in one dlopen call. This corrupts TLS data structures. The bug is still present after a revert, but empirically it is much more difficult to trigger (because it involves a dlopen failure).
* elf: Fix glibc-hwcaps priorities with cache flags mismatches [BZ #27046]Florian Weimer2021-06-251-64/+60
| | | | | | | | | | | | | | | | | | | | If lib->flags (in the cache) did not match GLRO (dl_correct_cache_id), searching for further glibc-hwcaps entries did not happen, and it was possible that the best glibc-hwcaps was not found. By accident, this causes a test failure for elf/tst-glibc-hwcaps-prepend-cache on armv7l. This commit changes the cache lookup logic to continue searching if (a) no match has been found, (b) a named glibc-hwcaps match has been found(), or (c) non-glibc-hwcaps match has been found and the entry flags and cache default flags do not match. _DL_CACHE_DEFAULT_ID is used instead of GLRO (dl_correct_cache_id) because the latter is only written once on i386 if loading of libc.so.5 libraries is selected, so GLRO (dl_correct_cache_id) should probably removed in a future change. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* * NEWS: Clarify _TIME_BITS change.Paul Eggert2021-06-241-1/+3
|
* x86: Remove unnecessary overflow check from wcsnlen-sse4_1.SNoah Goldstein2021-06-241-7/+0
| | | | | | | | | | | | | | | | | | | | | No bug. The way wcsnlen will check if near the end of maxlen is the following macro: mov %r11, %rsi; \ subq %rax, %rsi; \ andq $-64, %rax; \ testq $-64, %rsi; \ je L(strnlen_ret) Which words independently of s + maxlen overflowing. So the second overflow check is unnecissary for correctness and just extra overhead in the common no overflow case. test-strlen.c, test-wcslen.c, test-strnlen.c and test-wcsnlen.c are all passing Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* String: Add three more overflow tests cases to test-strnlen.cNoah Goldstein2021-06-241-0/+4
| | | | | | | | No bug. Just seem like relevant cases given that strnlen will use s + maxlen in many implementations. Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* Consolidate pthread_atforkAdhemerval Zanella2021-06-249-75/+18
| | | | | | | | | | | | The pthread_atfork is similar between Linux and Hurd, only the compat version bits differs. The generic version is place at sysdeps/pthread with a common name. It also fixes an issue with Hurd license, where the static-only object did not use LGPL + exception. Checked on x86_64-linux-gnu, i686-linux-gnu, and with a build for i686-gnu.
* posix: Do not clobber errno by atfork handlersAdhemerval Zanella2021-06-241-0/+6
| | | | Checked on x86_64-linux-gnu.
* posix: Consolidate fork implementationAdhemerval Zanella2021-06-2410-297/+378
| | | | | | | | | | | | | | | | The Linux nptl implementation is used as base for generic fork implementation to handle the internal locks and mutexes. The system specific bits are moved a new internal _Fork symbol. (This new implementation will be used to provide a async-signal-safe _Fork now that POSIX has clarified that fork might not be async-signal-safe [1]). For Hurd it means that the __nss_database_fork_prepare_parent and __nss_database_fork_subprocess will be run in a slight different order. [1] https://austingroupbugs.net/view.php?id=62
* support: Add xcloneAdhemerval Zanella2021-06-243-0/+85
| | | | | | It is a wrapper for Linux clone syscall, to simplify the call to the use only the most common arguments and remove architecture specific handling (such as ia64 different name and signature).
* x86: Fix tst-cpu-features-cpuinfo on Ryzen 9 (BZ #27873)Adhemerval Zanella2021-06-244-4/+46
| | | | | | | | | | | | | | | | | | | AMD define different flags for IRPB, IBRS, and STIPBP [1], so new x86_64_cpu are added and IBRS_IBPB is only tested for Intel. The SSDB is also defined and implemented different on AMD [2], and also a new AMD_SSDB flag is added. It should map to the cpuinfo 'ssdb' on recent AMD cpus. It fixes tst-cpu-features-cpuinfo and tst-cpu-features-cpuinfo-static on recent AMD cpus. Checked on x86_64-linux-gnu on AMD Ryzen 9 5900X. [1] https://developer.amd.com/wp-content/resources/Architecture_Guidelines_Update_Indirect_Branch_Control.pdf [2] https://bugzilla.kernel.org/show_bug.cgi?id=199889 Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86: Copy IBT and SHSTK usable only if CET is enabledH.J. Lu2021-06-231-2/+5
| | | | | | | IBT and SHSTK usable bits are copied from CPUID feature bits and later cleared if kernel doesn't support CET. Copy IBT and SHSTK usable only if CET is enabled so that they aren't set on CET capable processors with non-CET enabled glibc.
* x86: Fix overflow bug in wcsnlen-sse4_1 and wcsnlen-avx2 [BZ #27974]Noah Goldstein2021-06-232-38/+107
| | | | | | | | | | | | | This commit fixes the bug mentioned in the previous commit. The previous implementations of wmemchr in these files relied on maxlen * sizeof(wchar_t) which was not guranteed by the standard. The new overflow tests added in the previous commit now pass (As well as all the other tests). Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86: Fix overflow bug with wmemchr-sse2 and wmemchr-avx2 [BZ #27974]Noah Goldstein2021-06-232-37/+98
| | | | | | | | | | | | | This commit fixes the bug mentioned in the previous commit. The previous implementations of wmemchr in these files relied on n * sizeof(wchar_t) which was not guranteed by the standard. The new overflow tests added in the previous commit now pass (As well as all the other tests). Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* String: Add overflow tests for strnlen, memchr, and strncat [BZ #27974]Noah Goldstein2021-06-233-3/+130
| | | | | | | | | | | | | | | | | | | | | | This commit adds tests for a bug in the wide char variant of the functions where the implementation may assume that maxlen for wcsnlen or n for wmemchr/strncat will not overflow when multiplied by sizeof(wchar_t). These tests show the following implementations failing on x86_64: wcsnlen-sse4_1 wcsnlen-avx2 wmemchr-sse2 wmemchr-avx2 strncat would fail as well if it where on a system that prefered either of the wcsnlen implementations that failed as it relies on wcsnlen. Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add wcslen optimize for sse4.1Noah Goldstein2021-06-236-36/+63
| | | | | | | | | No bug. This comment adds the ifunc / build infrastructure necessary for wcslen to prefer the sse4.1 implementation in strlen-vec.S. test-wcslen.c is passing. Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com> Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Move strlen.S to multiarch/strlen-vec.SH.J. Lu2021-06-234-242/+262
| | | | | | | | Since strlen.S contains SSE2 version of strlen/strnlen and SSE4.1 version of wcslen/wcsnlen, move strlen.S to multiarch/strlen-vec.S and include multiarch/strlen-vec.S from SSE2 and SSE4.1 variants. This also removes the unused symbols, __GI___strlen_sse2 and __GI___wcsnlen_sse4_1.
* hurd: Fix build after 52a5fe70a2Adhemerval Zanella2021-06-232-3/+6
| | | | Hurd does not support 64-bit time_t internally.
* nptl: Use SA_RESTART for SIGCANCEL handlerAdhemerval Zanella2021-06-232-1/+13
| | | | | | | | | | | | | | | | The usage of signals to implementation pthread cancellation is an implementation detail and should not be visible through cancellation entrypoints. However now that pthread_cancel always send the SIGCANCEL, some entrypoint might be interruptable and return EINTR to the caller (for instance on sem_wait). Using SA_RESTART hides this, since the cancellation handler should either act uppon cancellation (if asynchronous cancellation is enable) or ignore the cancellation internal signal. Checked on x86_64-linux-gnu and i686-linux-gnu.
* doc: _TIME_BITS defaults may changePaul Eggert2021-06-232-30/+29
| | | | | | | * NEWS: Don't imply the default will always be 32-bit. * manual/creature.texi (Feature Test Macros): Say that _TIME_BITS and _FILE_OFFSET_BITS defaults may change in future releases.
* More mcheck -> malloc-check refactoringSiddhesh Poyarekar2021-06-232-23/+27
| | | | | Refactored malloc-check rules for tests that are automatically generated and executed with MALLOC_CHECK_=3.
* Add NEWS item for gconv-modules.d changeSiddhesh Poyarekar2021-06-231-0/+8
| | | | Reviewed-by: DJ Delorie <dj@redhat.com>
* Handle DT_UNKNOWN in gconv-modules.dSiddhesh Poyarekar2021-06-231-1/+8
| | | | | | | | On filesystems that do not support dt_type, a regular file shows up as DT_UNKNOWN. Fall back to using lstat64 to read file properties in such cases. Reviewed-by: DJ Delorie <dj@redhat.com>
* iconvconfig: Use common gconv module parsing functionSiddhesh Poyarekar2021-06-231-115/+13
| | | | | | | | Drop local copy of gconv file parsing and use the one in gconv_parseconfdir.h instead. Now there is a single implementation of configuration file parsing. Reviewed-by: DJ Delorie <dj@redhat.com>
* gconv_conf: Split out configuration file processingSiddhesh Poyarekar2021-06-232-126/+164
| | | | | | | | Split configuration file processing into a separate header file and include it. Macroize all calls that need to go through internal interfaces so that iconvconfig can also use them. Reviewed-by: DJ Delorie <dj@redhat.com>
* gconv_conf: Remove unused variablesSiddhesh Poyarekar2021-06-231-14/+10
| | | | | | | | | The modules and nmodules parameters passed to add_modules, add_alias, etc. are not used and are hence unnecessary. Remove them so that their signatures match the functions in iconvconfig. Reviewed-by: DJ Delorie <dj@redhat.com> Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-20 13:20:47 +0000