about summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
* Refactor FP_ILOGB* out of bits/mathdef.h.Joseph Myers2016-12-0117-105/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the refactoring of bits/mathdef.h, this patch stops it defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to a new header bits/fp-logb.h. There are only two possible values of each of those macros permitted by ISO C. TS 18661-1 adds corresponding macros for llogb, and their values are required to correspond to those of the ilogb macros in the obvious way. Thus two boolean values - for which the same choices are correct for most architectures - suffice to determine the value of all these macros, and by defining macros for those boolean values in bits/fp-logb.h we can then define the public FP_* macros in math.h and avoid the present duplication of the associated feature test macro logic. This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and __FP_LOGBNAN_IS_MIN. Default definitions of those to 0 are correct for both architectures, while ia64, m68k and x86 get their own versions of bits/fp-logb.h to reflect their use of values different from the defaults. The patch renders many copies of bits/mathdef.h trivial (needed only to avoid the default __NO_LONG_DOUBLE_MATH). I'll revise <https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html> accordingly so that it removes all bits/mathdef.h headers except the default one and the alpha one, and arranges for the header to be included only by complex.h as the only remaining use at that point will be for the alpha ABI issues there. Tested for x86_64 and x86. Also did compile-only testing with build-many-glibcs.py (using glibc sources from before the commit that introduced many build failures with undefined __GI___sigsetjmp). * bits/fp-logb.h: New file. * sysdeps/ia64/bits/fp-logb.h: Likewise. * sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise. * sysdeps/x86/bits/fp-logb.h: Likewise. * math/Makefile (headers): Add bits/fp-logb.h. * math/math.h: Include <bits/fp-logb.h>. [__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN. [__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN. * bits/mathdef.h (FP_ILOGB0): Remove. (FP_ILOGBNAN): Likewise. * sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise.
* Make build-many-glibcs.py support running as a bot.Joseph Myers2016-12-012-11/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes build-many-glibcs.py support a "bot" action, for repeatedly running a checkout and build cycle. Two new configuration variables are used in bot-config.json. "delay" indicates the time to sleep after each bot-cycle round (regardless of whether that round actually ran any builds); "run" is a boolean, which is false if the bot should just exit (the point of this is that you can edit bot-config.json to set this to false to cause a running bot to exit cleanly between builds) and true if the bot should run. The bot does not exit if the bot-cycle process exits with error status (that can occur when sourceware's load limiting means anonymous version control access fails, for example), just sleeps until it's time to try again. The script is changed to flush stdout before running a subprocess in bot-cycle, so that when output is redirected (as expected for a bot) the status messages from bot-cycle appear in their proper position in its redirected output relative to the output from the subprocesses run, and to copy the logs directory before running builds in bot-cycle so that the logs from at least one complete build are always available for looking at how something failed, even while the next build is running. * scripts/build-many-glibcs.py: Add bot to usage message. Import time module. (Context.__init__): Initialize self.logsdir_old. (Context.run_builds): Handle bot action. (Context.bot_cycle): Copy logs directory before running builds. (Context.bot_run_self): Take argument for whether to check subprocess result. Flush stdout before running subprocess. (Context.bot): New function. (get_parser): Allow bot action.
* Add build-many-glibcs.py bot-cycle action.Joseph Myers2016-11-302-9/+174
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues the process of setting up build-many-glibcs.py to run as a bot monitoring for and reporting on build issues by adding a bot-cycle action to the script. When this action is used, it will run the checkout action (re-execing itself if it was changed by that action), then rebuild whichever of host-libraries, compilers, glibcs should be rebuilt based on changed versions, time elapsed and state of previous builds. Email is sent with the results of the build (for each build action done). The rebuild logic is: if previous build time or versions aren't recorded, rebuild that component. If the script has changed, rebuild everything. If any relevant component version has changed, rebuild, except for not rebuilding compilers if the time indicated in the bot configuration has not passed since the last build of the compilers. If one piece is rebuilt then rebuild subsequent pieces as well. Using bot-cycle requires a configuration file bot-config.json in the toplevel directory used by build-many-glibcs.py. It might contain e.g. { "compilers-rebuild-delay": 604800, "email-from": "Example Name <user@example.org>", "email-server": "localhost", "email-subject": "GCC 6 %(action)s %(build-time)s build results", "email-to": "libc-testresults@sourceware.org" } My next intended step is adding a further action "bot" which loops running bot-cycle then sleeping for an amount of time given in bot-config.json. Then I'll set up a bot using that action (building with GCC 6 branch; a bot using GCC mainline may wait until the SH out-of-memory issues <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78460> are fixed; I expect the bot to mail to me until it seems ready to switch to mailing to gcc-testresults). * scripts/build-many-glibcs.py: Add bot-cycle to usage message. Import email.mime.text, email.utils and smtplib modules. (Context.__init__): Initialize self.bot_config_json. (Context.run_builds): Handle bot-cycle action. (Context.load_bot_config_json): New function. (Context.part_build_old): Likewise. (Context.bot_cycle): Likewise. (Context.bot_build_mail): Likewise. (Context.bot_run_self): Likewise. (get_parser): Allow bot-cycle action.
* powerpc: Remove stpcpy internal clash with IFUNCAdhemerval Zanella2016-11-302-3/+6
| | | | | | | | | | | | | | | | | | | | | Commit 142e0a99530 redirected the internal stpcpy to default powerpc64 implementation by redefining the weak_alias at sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c: #undef weak_alias #define weak_alias(name, aliasname) \ extern __typeof (__stpcpy_ppc) aliasname \ __attribute__ ((weak, alias ("__stpcpy_ppc"))); This creates a __GI_stpcpy alias that clashes with the IFUNC symbol in stpcpy.os. There is not need to define the default version for internal version, since ifunc should work internally for powerpc64. This patch removes the weak_alias indirection. Checked on powerpc64le. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c (weak_alias): Remove redirection to __stpcpy_ppc.
* ld.so: Remove __libc_memalignFlorian Weimer2016-11-3048-119/+106
| | | | | | | It is no longer needed since commit 6c444ad6e953dbdf9c7be065308a0a777 (elf: Do not use memalign for TCB/TLS blocks allocation [BZ #17730]). Applications do not link against ld.so and will use the definition in libc.so, so there is no ABI impact.
* Implement _dl_catch_error, _dl_signal_error in libc.so [BZ #16628]Florian Weimer2016-11-3037-315/+595
| | | | | | | | | | | | | | | | | | This change moves the main implementation of _dl_catch_error, _dl_signal_error to libc.so, where TLS variables can be used directly. This removes a writable function pointer from the rtld_global variable. For use during initial relocation, minimal implementations of these functions are provided in ld.so. These are eventually interposed by the libc.so implementations. This is implemented by compiling elf/dl-error-skeleton.c twice, via elf/dl-error.c and elf/dl-error-minimal.c. As a side effect of this change, the static version of dl-error.c no longer includes support for the _dl_signal_cerror/_dl_receive_error mechanism because it is only used in ld.so.
* libio: Limit buffer size to 8192 bytes [BZ #4099]Florian Weimer2016-11-303-1/+13
| | | | | This avoids overly large buffers with network file systems which report very large block sizes.
* Remove out of date PROJECTS file.Carlos O'Donell2016-11-302-107/+4
| | | | | Developers should use: https://sourceware.org/glibc/wiki/Development_Todo/Master
* gconv: Adjust GBK to support the Euro signFlorian Weimer2016-11-292-2/+19
| | | | | Commit aa4d00ca39e604ac4e9fead401ccd4483e11a281 only updated the data used by locales.
* Use XSTAT_IS_XSTAT64 in generic xstat functionsSteve Ellcey2016-11-299-0/+124
| | | | | | | | | | | | | | | | | * sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat.c: Do not define fxstat if XSTAT_IS_XSTAT64 is set to non-zero. * sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat.c: Ditto for fxstatat. * sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat.c: Ditto for lxstat. * sysdeps/unix/sysv/linux/generic/wordsize-32/xstat.c: Ditto for xstat. * sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat64.c: New file. * sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat64.c: New file. * sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat64.c: Make __lxstat an alias of __lxstat64 if XSTAT_IS_XSTAT64 is set to non-zero. * sysdeps/unix/sysv/linux/generic/wordsize-32/xstat64.c: Ditto for __xstat.
* powerpc: Add hidden definition for __sigsetjmpFlorian Weimer2016-11-294-0/+20
| | | | | There already is a hidden prototype for __sigsetjmp, but the architecture-specific definition was missing.
* powerpc: Remove unintended __longjmp symbol from ABIFlorian Weimer2016-11-293-4/+9
| | | | | | | | The __longjmp symbol was left in accidentally. It is not exported through a Versions file, but through a .symver assembler directive. The corresponding exported symbol was removed from the non-fpu powerpc64 targets in commit 9b9ef823581ecee546653d6ac3fd335f7b79faca.
* Refactor FP_FAST_* into bits/fp-fast.h.Joseph Myers2016-11-2912-157/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the refactoring of bits/mathdef.h, this patch moves the FP_FAST_* definitions into a new bits/fp-fast.h header. Currently this is only for FP_FAST_FMA*, but in future it would be the appropriate place for the FP_FAST_* macros from TS 18661-1 as well. The generic bits/mathdef.h header defines these macros based on whether the compiler defines __FP_FAST_*. Most architecture-specific headers, however, fail to do so, meaning that if the architecture (or some particular processors) does in fact have fused operations, and GCC knows to use them inline, the FP_FAST_* macros will still not be defined. By refactoring, this patch causes the generic version (based on __FP_FAST_*) to be used in more cases, and so the macro definitions to be more accurate. Architectures that already defined some or all of these macros other than based on the predefines have their own versions of fp-fast.h, which are arranged so they define FP_FAST_* if either the architecture-specific conditions are true or __FP_FAST_* are defined. After this refactoring, various bits/mathdef.h headers for architectures with long double = double are semantically identical to the generic version. The patch removes those headers that are redundant. (In fact two of the four removed were already redundant before this patch because they did use __FP_FAST_*.) Tested for x86_64 and x86, and compilation-only with build-many-glibcs.py. * bits/fp-fast.h: New file. * sysdeps/aarch64/bits/fp-fast.h: Likewise. * sysdeps/powerpc/bits/fp-fast.h: Likewise. * math/Makefile (headers): Add bits/fp-fast.h. * math/math.h: Include <bits/fp-fast.h>. * bits/mathdef.h (FP_FAST_FMA): Remove. (FP_FAST_FMAF): Likewise. (FP_FAST_FMAL): Likewise. * sysdeps/aarch64/bits/mathdef.h (FP_FAST_FMA): Likewise. (FP_FAST_FMAF): Likewise. * sysdeps/powerpc/bits/mathdef.h (FP_FAST_FMA): Likewise. (FP_FAST_FMAF): Likewise. * sysdeps/x86/bits/mathdef.h (FP_FAST_FMA): Likewise. (FP_FAST_FMAF): Likewise. (FP_FAST_FMAL): Likewise. * sysdeps/arm/bits/mathdef.h: Remove file. * sysdeps/hppa/fpu/bits/mathdef.h: Likewise. * sysdeps/sh/sh4/bits/mathdef.h: Likewise. * sysdeps/tile/bits/mathdef.h: Likewise.
* Make ilogb wrappers type-generic.Joseph Myers2016-11-288-96/+21
| | | | | | | | | | | | | | | | | | | | | This patch converts the ilogb wrappers (which set errno directly rather than doing anything with __kernel_standard) to use the type-generic template machinery. This is intended as preparation for adding llogb. Tested for x86_64 and x86, and tested compile for other architectures with build-many-glibcs.py. * math/w_ilogb_template.c: New file. Based on math/w_ilogb.c. * math/w_ilogb.c: Remove. * math/w_ilogbf.c: Likewise. * math/w_ilogbl.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_ilogb.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_ilogbl.c: Likewise. * math/Makefile (gen-libm-calls): Add w_ilogbF. (libm-calls): Remove w_ilogbF. * sysdeps/ieee754/ldbl-opt/math-type-macros-double.h (LDOUBLE_ilogbl_libm_version): New macro.
* Work around IA64 tst-setcontext2.c compile failure.Joseph Myers2016-11-282-0/+26
| | | | | | | | | | | | | | | | | | | | Building tests for IA64 runs into a build failure compiling stdlib/tst-setcontext2.c: tst-setcontext2.c: In function 'do_test': tst-setcontext2.c:210:20: error: passing argument 1 of 'sigismember' from incompatible pointer type [-Werror=incompatible-pointer-types] if (sigismember (&oldctx.uc_sigmask, SIGUSR2) != 1) ^ Indeed, the IA64 uc_sigmask as unsigned long rather than the larger userspace sigset_t. Fixing this might be hard; this patch works around the build failure by making IA64 wrap the test with a version that #defines sigismember to add a cast (I'd welcome a better approach for fixing this). Tested (compilation only) for ia64. * sysdeps/unix/sysv/linux/ia64/tst-setcontext2.c: New file.
* Fix sysdeps/ia64/fpu/libm-symbols.h for inclusion in testcases.Joseph Myers2016-11-282-18/+25
| | | | | | | | | | | | | | | | | | | IA64 builds in math/ use "-include libm-symbols.h". This breaks the signgam tests, which rely on undefining _LIBC and feature test macros and defining _ISOMAC before including system headers to get them to provide only ISO C declarations (libm-symbols.h ending up indirectly including headers which result in this breaking); similarly, it breaks C++ tests as some headers included from libm-symbols.h are not ready for inclusion in C++ code. This patch disables the contents of libm-symbols.h if __STRICT_ANSI__ or __cplusplus are defined to avoid this problem (this header can only test symbols defined before the source file is processed, so can't test _ISOMAC because that's defined within the source file, after this header is included). Tested (compilation only) for ia64. * sysdeps/ia64/fpu/libm-symbols.h: Make contents conditional on [!__STRICT_ANSI__ && !__cplusplus].
* X86_64: Don't use PLT nor GOT in static archives [BZ #20750]H.J. Lu2016-11-282-1/+8
| | | | | | | | | | | There is no need to use PLT nor GOT in static archives to branch to a function, regardless whether static archives is compiled with PIC or not. When static archives are used to create dynamic executable, PLT/GOT may be used. The resulting executable still works correctly. [BZ #20750] * sysdeps/x86_64/sysdep.h (JUMPTARGET): Check SHARED instead of PIC.
* Partial ILP32 support for aarch64.Steve Ellcey2016-11-2834-167/+384
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * sysdeps/aarch64/crti.S: Add include of sysdep.h. (call_weak_fn): Use PTR_REG to get correct reg name in ILP32. * sysdeps/aarch64/dl-irel.h: Add include of sysdep.h. (elf_irela): Use AARCH64_R macro to get correct relocation in ILP32. * sysdeps/aarch64/dl-machine.h: Add include of sysdep.h. (elf_machine_load_address, RTLD_START, RTLD_START_1, RTLD_START, elf_machine_type_class, ELF_MACHINE_JMP_SLOT, elf_machine_rela, elf_machine_lazy_rel): Add ifdef's for ILP32 support. * sysdeps/aarch64/dl-tlsdesc.S (_dl_tlsdesc_return, _dl_tlsdesc_return_lazy, _dl_tlsdesc_dynamic, _dl_tlsdesc_resolve_hold): Extend pointers in ILP32, use PTR_REG to get correct reg name for ILP32. * sysdeps/aarch64/dl-trampoline.S (ip01): New Macro. (RELA_SIZE): New Macro. (_dl_runtime_resolve, _dl_runtime_profile): Use new macros and PTR_REG to support ILP32. * sysdeps/aarch64/jmpbuf-unwind.h (_JMPBUF_CFA_UNWINDS_ADJ): Add cast for ILP32 mode. * sysdeps/aarch64/memcmp.S (memcmp): Extend arg pointers for ILP32 mode. * sysdeps/aarch64/memcpy.S (memmove, memcpy): Ditto. * sysdeps/aarch64/memset.S (__memset): Ditto. * sysdeps/aarch64/strchr.S (strchr): Ditto. * sysdeps/aarch64/strchrnul.S (__strchrnul): Ditto. * sysdeps/aarch64/strcmp.S (strcmp): Ditto. * sysdeps/aarch64/strcpy.S (strcpy): Ditto. * sysdeps/aarch64/strlen.S (__strlen): Ditto. * sysdeps/aarch64/strncmp.S (strncmp): Ditto. * sysdeps/aarch64/strnlen.S (strnlen): Ditto. * sysdeps/aarch64/strrchr.S (strrchr): Ditto. * sysdeps/unix/sysv/linux/aarch64/clone.S: Ditto. * sysdeps/unix/sysv/linux/aarch64/setcontext.S (__setcontext): Ditto. * sysdeps/unix/sysv/linux/aarch64/swapcontext.S (__swapcontext): Ditto. * sysdeps/aarch64/__longjmp.S (__longjmp): Extend pointers in ILP32, change PTR_MANGLE call to use register numbers instead of names. * sysdeps/unix/sysv/linux/aarch64/getcontext.S (__getcontext): Ditto. * sysdeps/aarch64/setjmp.S (__sigsetjmp): Extend arg pointers for ILP32 mode, change PTR_MANGLE calls to use register numbers. * sysdeps/aarch64/start.S (_start): Ditto. * sysdeps/aarch64/nptl/bits/pthreadtypes.h (__PTHREAD_RWLOCK_INT_FLAGS_SHARED): New define. (__SIZEOF_PTHREAD_ATTR_T, __SIZEOF_PTHREAD_MUTEX_T, __SIZEOF_PTHREAD_MUTEXATTR_T, __SIZEOF_PTHREAD_COND_T, __SIZEOF_PTHREAD_COND_COMPAT_T, __SIZEOF_PTHREAD_CONDATTR_T, __SIZEOF_PTHREAD_RWLOCK_T, __SIZEOF_PTHREAD_RWLOCKATTR_T, __SIZEOF_PTHREAD_BARRIER_T, __SIZEOF_PTHREAD_BARRIERATTR_T): Make defined values dependent on __ILP32__. * sysdeps/aarch64/nptl/bits/semaphore.h (__SIZEOF_SEM_T): Change define. (sem_t): Change __align type. * sysdeps/aarch64/sysdep.h (AARCH64_R, PTR_REG, PTR_LOG_SIZE, DELOUSE, PTR_SIZE): New Macros. (LDST_PCREL, LDST_GLOBAL) Update to use PTR_REG. * sysdeps/unix/sysv/linux/aarch64/bits/fcntl.h (O_LARGEFILE): Set when in ILP32 mode. (F_GETLK64, F_SETLK64, F_SETLKW64): Only set in LP64 mode. * sysdeps/unix/sysv/linux/aarch64/dl-cache.h (DL_CACHE_DEFAULT_ID): Set elf flags for ILP32. (add_system_dir): Set ILP32 library directories. * sysdeps/unix/sysv/linux/aarch64/init-first.c (_libc_vdso_platform_setup): Set minimum kernel version for ILP32. * sysdeps/unix/sysv/linux/aarch64/ldconfig.h (SYSDEP_KNOWN_INTERPRETER_NAMES): Add ILP32 names. * sysdeps/unix/sysv/linux/aarch64/sigcontextinfo.h (GET_PC, SET_PC): New Macros. * sysdeps/unix/sysv/linux/aarch64/sysdep.h: Handle ILP32 pointers.
* Fix for [f]statfs64/[f]statfs aliasing patchSteve Ellcey2016-11-283-16/+28
| | | | | | * sysdeps/unix/sysv/linux/fstatfs64.c: Reorder include files, only alias fstatfs and __fstatfs if STATFS_IS_STATFS64 is non-zero. * sysdeps/unix/sysv/linux/statfs64.c: Ditto for statfs and __statfs.
* Do not include asm/cachectl.h in nios2 sys/cachectl.h.Joseph Myers2016-11-282-3/+5
| | | | | | | | | | | The nios2 sys/cachectl.h includes a kernel header asm/cachectl.h, which does not exist, so causing the check-installed-headers tests to fail. This patch removes the include of a nonexistent header. Tested (compilation only) for nios2. * sysdeps/unix/sysv/linux/nios2/sys/cachectl.h: Do not include <asm/cachectl.h>.
* Minor problems exposed by compiling C++ tests under _ISOMAC.Zack Weinberg2016-11-273-1/+7
| | | | | * libio/libio.h: Use __USE_GNU, not _GNU_SOURCE, in a conditional. * test-skeleton.c: Include stdint.h to ensure uintptr_t is available.
* hurd: fix using hurd/signal.h in C++ programsSamuel Thibault2016-11-272-3/+8
| | | | | * hurd/hurd/signal.h (HURD_MSGPORT_RPC): Cast expressions results to error_t to fix usage in C++ programs.
* localedata: GBK: add mapping for 0x80->Euro sign [BZ #20864]Mike Frysinger2016-11-262-0/+12
| | | | | | | | Microsoft long ago added a mapping for 0x80 to the Euro sign to their CP936. While GBK 1.0 doesn't include this mapping, it is compatible, and Microsoft and glibc alias the two codepages. We could split them apart so GBK wouldn't include the mapping, but that seems like a lot of work for little gain.
* Make build-many-glibcs.py store more information about builds.Joseph Myers2016-11-262-4/+124
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes build-many-glibcs.py store information about builds in JSON format. This is part of preparing it for use in a bot checking for regressions. The information stored is: time of last build (of host-libraries, compilers or glibcs); versions of components used in the last build (for compilers, host library versions are properly copied from those used for the previous host-libraries build, and for glibcs, component versions other than that of glibc are similarly copied from the last compilers build); PASS/FAIL/UNRESOLVED results of the individual build steps; a list of changed results; a list of tests (that are still run at all) that have ever been recorded to PASS. The first pieces of information are intended to be used by a bot to decide whether a rebuild is appropriate (based on some combination of elapsed time and changes to versions; a bot might want to rebuild glibcs if there had been any change but only rebuild compilers after enough time had elapsed, for example). All the information is intended to be used in generating mails with results information. This state is specifically for full builds (no individual configs for building compilers or glibcs specified). If individual configs are specified, build-time and build-versions information is cleared (since it will no longer accurately reflect the install directory contents), while the other information is left unchanged. This reflects the motivation of providing information for a bot checking for regressions; the contents of build-state.json in a tree used for manual builds that may be only for some configurations are not particularly important. * scripts/build-many-glibcs.py: Import datetime module. (Context.__init__): Load JSON build state. Initialize list of status logs. (Context.run_builds): Update saved build state. (Context.add_makefile_cmdlist): Update list of status logs. (Context.load_build_state_json): New function. (Context.store_build_state_json): Likewise. (Context.clear_last_build_state): Likewise. (Context.update_build_state): Likewise. (CommandList.status_logs): Likewise.
* Make build-many-glibcs.py re-exec itself if changed by checkout.Joseph Myers2016-11-252-0/+22
| | | | | | | | | | | | | | | | | | | Updating build-many-glibcs.py may result in changes to the default versions of components, or to the set of components (if e.g. Hurd support is added and that requires a new component). It's desirable for the checkout process to leave a source tree that is ready to use. If the checkout updated the script itself, that means it needs to be rerun to cause any new versions or components referenced by the new script version to be properly checked out. This patch makes the script check if it was modified by the checkout process, and re-exec itself (with the same arguments) if so. * scripts/build-many-glibcs.py (Context.__init__): Save text of script being executed. (Context.get_script_text): New function. (Context.exec_self): Likewise. (Context.checkout): Re-exec script if changed by checkout process.
* Add setpayloadsig, setpayloadsigf, setpayloadsigl.Joseph Myers2016-11-2442-5/+300
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayloadsig functions for glibc; these are like the setpayload functions, but produce a signaling NaN instead of a quiet NaN. The substance of the implementation was included with the setpayload implementation, so the new files here just need to wrap the main files with different defines to build the new functions. Because the functions store a signaling NaN via a pointer and the libm-test macros choose a suitable initial value for the variable in such a case by comparing with the expected value, the relevant macro needs to clear exceptions after FE_INVALID may have been raised by that comparison. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayloadsig): New declaration. * math/Versions (setpayloadsig): New libm symbol at version GLIBC_2.25. (setpayloadsigf): Likewise. (setpayloadsigl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadsigF. * math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept (FE_ALL_EXCEPT) after initializing EXTRA_VAR. (setpayloadsig_test_data): New array. (setpayloadsig_test): New function. (main): Call setpayloadsig_test. * manual/arith.texi (FP Bit Twiddling): Document setpayloadsig, setpayloadsigf and setpayloadsigl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file. * sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayloadsig. (CFLAGS-nldbl-setpayloadsig.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Make build-many-glibcs.py track component versions requested and used.Joseph Myers2016-11-242-10/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes build-many-glibcs.py record the component versions checked out, and whether those versions were explicitly requested or defaults, in a file versions.json in the source directory. The preferred version of a component is the first of: one explicitly specified on the command line; one explicitly specified on the command line in a previous run of build-many-glibcs.py; a default version for that component. Thus, once you've run build-many-glibcs.py checkout once with the updated script (making sure to specify the right versions of any components previously checked out with a non-default version), in future you can just run it without version specifiers and it will know when a default-version component has changed its default version and so should be checked out again. Because you might have local changes and not want a default-version component checkout replaced, you need to pass the --replace-sources option to allow the script to delete and replace a component source directory automatically; otherwise, it will give an error if a version has changed. The script does not try to change branches of git or SVN checkouts without checking out from scratch; if the version number requested has changed and --replace-sources is used, the relevant source directory will be removed completely and a new one checked out from scratch. Apart from allowing automatic updates of components with default versions, this also facilitates bots reporting on the versions used in a given build. versions.json contains not just information on the version number and whether that was requested explicitly, but also git or SVN revision information intended to be used in email reports from bots. * scripts/build-many-glibcs.py: Import json module. (Context.__init__): Take replace_sources argument. Load versions.json. (Context.load_versions_json): New function. (Context.store_json): Likewise. (Context.store_versions_json): Likewise. (Context.set_component_version): Likewise. (Context.checkout): Update versions.json. Check for and handle changes of version. Prefer previously explicitly specified version to default version. (Context.checkout_vcs): Return a revision identifier. (Context.git_checkout): Likewise. (Context.gcc_checkout): Likewise. (get_parser): Add --replace-sources option. (main): Pass replace_sources argument to Context call.
* Remove cached PID/TID in cloneAdhemerval Zanella2016-11-2470-827/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch remove the PID cache and usage in current GLIBC code. Current usage is mainly used a performance optimization to avoid the syscall, however it adds some issues: - The exposed clone syscall will try to set pid/tid to make the new thread somewhat compatible with current GLIBC assumptions. This cause a set of issue with new workloads and usecases (such as BZ#17214 and [1]) as well for new internal usage of clone to optimize other algorithms (such as clone plus CLONE_VM for posix_spawn, BZ#19957). - The caching complexity also added some bugs in the past [2] [3] and requires more effort of each port to handle such requirements (for both clone and vfork implementation). - Caching performance gain in mainly on getpid and some specific code paths. The getpid performance leverage is questionable [4], either by the idea of getpid being a hotspot as for the getpid implementation itself (if it is indeed a justifiable hotspot a vDSO symbol could let to a much more simpler solution). Other usage is mainly for non usual code paths, such as pthread cancellation signal and handling. For thread creation (on stack allocation) the code simplification in fact adds some performance gain due the no need of transverse the stack cache and invalidate each element pid. Other thread usages will require a direct getpid syscall, such as cancellation/setxid signal, thread cancellation, thread fail path (at create_thread), and thread signal (pthread_kill and pthread_sigqueue). However these are hardly usual hotspots and I think adding a syscall is justifiable. It also simplifies both the clone and vfork arch-specific implementation. And by review each fork implementation there are some discrepancies that this patch also solves: - microblaze clone/vfork does not set/reset the pid/tid field - hppa uses the default vfork implementation that fallback to fork. Since vfork is deprecated I do not think we should bother with it. The patch also removes the TID caching in clone. My understanding for such semantic is try provide some pthread usage after a user program issue clone directly (as done by thread creation with CLONE_PARENT_SETTID and pthread tid member). However, as stated before in multiple discussions threads, GLIBC provides clone syscalls without further supporting all this semantics. I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le. For sparc32, sparc64, and mips I ran the basic fork and vfork tests from posix/ folder (on a qemu system). So it would require further testing on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze because it is already implementing the patch semantic regarding clone/vfork). [1] https://codereview.chromium.org/800183004/ [2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html [3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368 [4] http://yarchive.net/comp/linux/getpid_caching.html * sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting. * nptl/allocatestack.c (allocate_stack): Likewise. (__reclaim_stacks): Likewise. (setxid_signal_thread): Obtain pid through syscall. * nptl/nptl-init.c (sigcancel_handler): Likewise. (sighandle_setxid): Likewise. * nptl/pthread_cancel.c (pthread_cancel): Likewise. * sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise. * sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue): Likewise. * sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise. * sysdeps/unix/sysv/linux/getpid.c: Remove file. * nptl/descr.h (struct pthread): Change comment about pid value. * nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread pid assert. * sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids): Do not set pid value. * nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread pid cache check. * nptl_db/td_thr_validate.c (td_thr_validate): Likewise. * sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset. * sysdeps/alpha/nptl/tcb-offsets.sym: Likewise. * sysdeps/arm/nptl/tcb-offsets.sym: Likewise. * sysdeps/hppa/nptl/tcb-offsets.sym: Likewise. * sysdeps/i386/nptl/tcb-offsets.sym: Likewise. * sysdeps/ia64/nptl/tcb-offsets.sym: Likewise. * sysdeps/m68k/nptl/tcb-offsets.sym: Likewise. * sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise. * sysdeps/mips/nptl/tcb-offsets.sym: Likewise. * sysdeps/nios2/nptl/tcb-offsets.sym: Likewise. * sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise. * sysdeps/s390/nptl/tcb-offsets.sym: Likewise. * sysdeps/sh/nptl/tcb-offsets.sym: Likewise. * sysdeps/sparc/nptl/tcb-offsets.sym: Likewise. * sysdeps/tile/nptl/tcb-offsets.sym: Likewise. * sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise. * sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching. * sysdeps/unix/sysv/linux/alpha/clone.S: Likewise. * sysdeps/unix/sysv/linux/arm/clone.S: Likewise. * sysdeps/unix/sysv/linux/hppa/clone.S: Likewise. * sysdeps/unix/sysv/linux/i386/clone.S: Likewise. * sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise. * sysdeps/unix/sysv/linux/mips/clone.S: Likewise. * sysdeps/unix/sysv/linux/nios2/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise. * sysdeps/unix/sysv/linux/sh/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise. * sysdeps/unix/sysv/linux/tile/clone.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise. * sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/vfork.S: Likewise. * sysdeps/unix/sysv/linux/i386/vfork.S: Likewise. * sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/m68k/clone.S: Likewise. * sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise. * sysdeps/unix/sysv/linux/mips/vfork.S: Likewise. * sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tile/vfork.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread struct access. (clone_test): Remove function. (do_test): Rewrite to take in consideration pid is not cached anymore.
* Refactor float_t, double_t information into bits/flt-eval-method.h.Joseph Myers2016-11-2421-93/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present, definitions of float_t and double_t are split among many bits/mathdef.h headers. For all but three architectures, these types are float and double. Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that provides a more generic way of determining the correct values of these typedefs. Defining these typedefs more generally based on __FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in <https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>. This patch refactors things in the way I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>. A new header bits/flt-eval-method.h defines a single macro, __GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define float_t and double_t. The default is based on __FLT_EVAL_METHOD__ (although actually a default to 0 would have the same effect for current ports, because ports where values other than 0 or 16 are possible all have their own headers). To avoid changing the existing semantics in any case, including for compilers not defining __FLT_EVAL_METHOD__, architecture-specific files are then added for m68k, s390, x86 which replicate the existing semantics. At least with __FLT_EVAL_METHOD__ values possible with GCC, there should be no change to the choices of float_t and double_t for any supported configuration. Architecture maintainer notes: * m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines __GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic. But actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040. It might make sense to make the header prefer to base things on __FLT_EVAL_METHOD__ if defined, like the x86 version, and so make the choices of these types more accurate (with a NEWS entry as for the other changes to these types on particular architectures). * s390: sysdeps/s390/bits/flt-eval-method.h always defines __GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic. As previously discussed, it might make sense in coordination with GCC to eliminate the historic mistake, avoid excess precision in the -fexcess-precision=standard case and make the typedefs match (with a NEWS entry, again). Tested for x86-64 and x86. Also did compilation-only testing with build-many-glibcs.py. * bits/flt-eval-method.h: New file. * sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise. * sysdeps/s390/bits/flt-eval-method.h: Likewise. * sysdeps/x86/bits/flt-eval-method.h: Likewise. * math/Makefile (headers): Add bits/flt-eval-method.h. * math/math.h: Include <bits/flt-eval-method.h>. [__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD. [__USE_ISOC99] (double_t): Likewise. * bits/mathdef.h (float_t): Remove. (double_t): Likewise. * sysdeps/aarch64/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/alpha/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/arm/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/ia64/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/mips/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/powerpc/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/s390/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/sparc/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/tile/bits/mathdef.h (float_t): Likewise. (double_t): Likewise. * sysdeps/x86/bits/mathdef.h (float_t): Likewise. (double_t): Likewise.
* x86_64: fix static build of __memcpy_chk for compilers defaulting to PIC/PIEAurelien Jarno2016-11-242-1/+6
| | | | | | | | | | | When glibc is compiled with gcc 6.2 that has been configured with to default to PIC/PIE, the static version of __memcpy_chk is not built, as the test is done on PIC instead of SHARED. Fix the test to check for SHARED, like it is done for similar functions like memmove_chk. Changelog: * sysdeps/x86_64/memcpy_chk.S (__memcpy_chk): Check for SHARED instead of PIC.
* More NEWS entries / fixes for float_t / double_t changes.Joseph Myers2016-11-231-2/+9
| | | | | Document changes for x86_64 -mfpmath=sse and -mfpmath=sse+387. Don't put these NEWS entries in the middle of TS 18661-1 entries.
* Fix SH4 FP_ILOGB0 (bug 20859).Joseph Myers2016-11-234-2/+51
| | | | | | | | | | | | | | | | | | | | | | ISO C requires that the value of FP_ILOGB0 must be INT_MIN or -INT_MAX. In sysdeps/sh/sh4/bits/mathdef.h, it's 0x80000001; that is, a positive unsigned value that would be -INT_MAX if converted to int, which is not valid (there's no actual constraint on the type, but whatever the type the integer value must be one of the two permitted, and types other than int don't really make sense). This patch makes the ABI-compatible change to (-0x7fffffff). (The testcase handles positive and negative sign separately to avoid any issues with implicit conversions that could result in e.g. INT_MIN converted to uintmax_t wrongly passing.) Tested (compilation only) with build-many-glibcs.py. [BZ #20859] * sysdeps/sh/sh4/bits/mathdef.h (FP_ILOGB0): Define to (-0x7fffffff) instead of 0x80000001. * math/test-fp-ilogb-constants.c: New file. * math/Makefile (tests): Add test-fp-ilogb-constants.
* MIPS: Use R_MICROMIPS_JALR rather than R_MIPS_JALR in microMIPS codeMaciej W. Rozycki2016-11-234-6/+33
| | | | | | | | | | | | | | In a microMIPS compilation of `.init' code use the R_MICROMIPS_JALR relocation intended for PIC call relaxation in microMIPS code rather than the corresponding R_MIPS_JALR relocation meant for regular MIPS code only. * sysdeps/mips/mips32/crti.S (JALR_RELOC): New macro. (_init): Use it in place of hardcoded R_MIPS_JALR. * sysdeps/mips/mips64/n32/crti.S (JALR_RELOC): New macro. (_init): Use it in place of hardcoded R_MIPS_JALR. * sysdeps/mips/mips64/n64/crti.S (JALR_RELOC): New macro. (_init): Use it in place of hardcoded R_MIPS_JALR.
* Fix x86_64 -mfpmath=387 float_t, double_t (bug 20787).Joseph Myers2016-11-235-2/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug 20787 reports that, while float_t and double_t for 32-bit x86 properly respect -mfpmath=sse, for x86_64 they fail to reflect -mfpmath=387, which is valid if unusual and results in FLT_EVAL_METHOD being 2. This patch fixes the definitions to respect __FLT_EVAL_METHOD__ in that case, arranging for the test that the types correspond with FLT_EVAL_METHOD to be run with both -mfpmath=387 and -mfpmath=sse. Note: this patch will also have the effect of making float_t and double_t be long double for x86_64 with -mfpmath=sse+387, when FLT_EVAL_METHOD is -1. It seems reasonable for x86_64 to be consistent with 32-bit x86 in this case (and that definition is conservatively safe, in that it makes the types correspond to the widest evaluation format that might be used). Tested for x86-64 and x86. [BZ #20787] * sysdeps/x86/bits/mathdef.h (float_t): Do not define to float if [__x86_64__] when __FLT_EVAL_METHOD__ is nonzero. (double_t): Do not define to double if [__x86_64__] when __FLT_EVAL_METHOD__ is nonzero. * sysdeps/x86/fpu/test-flt-eval-method-387.c: New file. * sysdeps/x86/fpu/test-flt-eval-method-sse.c: Likewise. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add test-flt-eval-method-387 and test-flt-eval-method-sse. [$(subdir) = math] (CFLAGS-test-flt-eval-method-387.c): New variable. [$(subdir) = math] (CFLAGS-test-flt-eval-method-sse.c): Likewise.
* build-many-glibcs: Revert -fno-isolate-erroneous-paths options for tileproChris Metcalf2016-11-232-2/+6
| | | | TILEPro now has a __builtin_trap instruction in gcc tip and gcc 6.
* elf: Assume TLS is initialized in _dl_map_object_from_fdFlorian Weimer2016-11-232-47/+12
| | | | | libc.so uses TLS data, so when dlopen is called later, the TLS data structures have already been initialized.
* Fix default float_t definition (bug 20855).Joseph Myers2016-11-235-5/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default (top-level) version of bits/mathdef.h defines float_t to double. It is used on ColdFire, MicroBlaze, Nios II and SH3, all of which define FLT_EVAL_METHOD to 0, so float_t should be float (and C11 requires a certain correspondence between these typedefs and FLT_EVAL_METHOD values). I proposed fixing this default in <https://sourceware.org/ml/libc-alpha/2015-01/msg00499.html>, with no objections from architecture maintainers, and this patch makes that fix. As noted in the NEWS entry added, this might affect the ABIs of non-glibc libraries (ImageMagick has been mentioned in gcc-patches discussion of the S/390 case - which is unaffected by this patch), but as noted in my previous message, affected libraries would have problems with -mfpmath=sse anyway on 32-bit x86. A (compilation) testcase is added to verify the required correspondence of typedefs to FLT_EVAL_METHOD values. This test is built with -fexcess-precision=standard to avoid any issues with GCC 7 on S/390 providing a more accurate FLT_EVAL_METHOD definition in the default (no excess precision) mode. (This will also be usable to test a fix for the recently reported bug about these typedefs on x86_64 -mfpmath=387, as architecture-specific tests can be added that It is entirely possible that the fixed default makes some architecture-specific versions of bits/mathdef.h semantically equivalent to the default version and so no longer required. I don't intend to investigate that separately from the refactoring I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, which will create as few header variants as possible for each group of definitions. Tested (compilation only) with build-many-glibcs.py. [BZ #20855] * bits/mathdef.h (float_t): Define to float. * math/test-flt-eval-method.c: New file. * math/Makefile (tests): Add test-flt-eval-method. (CFLAGS-test-flt-eval-method.c): New variable.
* Allow [f]statfs64 to alias [f]statfsSteve Ellcey2016-11-2218-0/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | * sysdeps/unix/sysv/linux/fstatfs64.c: Hide prototypes for fstatfs and __fstatfs. Make them aliases of __fstatfs64 if STATFS_IS_STATFS64 is set to non-zero. * sysdeps/unix/sysv/linux/statfs64.c: Ditto for __statfs, statfs, and __statfs64. * sysdeps/unix/sysv/linux/generic/wordsize-32/fstatfs.c: Do not define __fstatfs and fstatfs if STATFS_IS_STATFS64 is non-zero. * sysdeps/unix/sysv/linux/generic/wordsize-32/statfs.c: Ditto for __statfs and statfs. * sysdeps/unix/sysv/linux/alpha/kernel_stat.h: Set STATFS_IS_STATFS64 to 0. * sysdeps/unix/sysv/linux/generic/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/hppa/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/ia64/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/microblaze/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/mips/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/powerpc/powerpc32/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/powerpc/powerpc64/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/s390/s390-64/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/sparc/sparc32/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/sparc/sparc64/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/x86_64/kernel_stat.h: Ditto.
* Fix multiple definitions of mk[o]stemp[s]64Andreas Schwab2016-11-225-0/+11
|
* Fix writes past the allocated array bounds in execvpe (BZ#20847)Adhemerval Zanella2016-11-222-5/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an invalid write out or stack allocated buffer in 2 places at execvpe implementation: 1. On 'maybe_script_execute' function where it allocates the new argument list and it does not account that a minimum of argc plus 3 elements (default shell path, script name, arguments, and ending null pointer) should be considered. The straightforward fix is just to take account of the correct list size on argument copy. 2. On '__execvpe' where the executable file name lenght may not account for ending '\0' and thus subsequent path creation may write past array bounds because it requires to add the terminating null. The fix is to change how to calculate the executable name size to add the final '\0' and adjust the rest of the code accordingly. As described in GCC bug report 78433 [1], these issues were masked off by GCC because it allocated several bytes more than necessary so that many off-by-one bugs went unnoticed. Checked on x86_64 with a latest GCC (7.0.0 20161121) with -O3 on CFLAGS. [BZ #20847] * posix/execvpe.c (maybe_script_execute): Remove write past allocated array bounds. (__execvpe): Likewise. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78433
* Make build-many-glibcs.py use -fno-isolate-erroneous-paths options for tilepro.Joseph Myers2016-11-222-5/+12
| | | | | | | | | | | | | | | | | | My most recent build-many-glibcs.py build with GCC mainline showed build failures for tilepro with the symptoms (multiple definitions of symbols building ld.so, see the build log referenced in the GCC bug referenced in the comment for an example) that correspond to the isolate-erroneous-paths optimization not being suitable for building glibc unless the GCC port provides a trap pattern (so __builtin_trap expands to an inline instruction rather than a call to abort). Since tilepro indeed lacks such as pattern in GCC, this patch duly arranges for this optimization to be disabled when building for tilepro, as it is for sh. Tested (compilation only) for tilepro. * scripts/build-many-glibcs.py (Context.add_all_configs): Also use -fno-isolate-erroneous-paths options for tilepro.
* Always define XSTAT_IS_XSTAT64Steve Ellcey2016-11-2120-13/+51
| | | | | | | | | | | | | | | | | | | | | | | | * sysdeps/unix/sysv/linux/generic/kernel_stat.h: Set XSTAT_IS_XSTAT64 to 0 when in 32 bit mode. * sysdeps/unix/sysv/linux/hppa/kernel_stat.h: Set XSTAT_IS_XSTAT64 to 0. * sysdeps/unix/sysv/linux/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/microblaze/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/mips/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/powerpc/powerpc32/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/sparc/sparc32/kernel_stat.h: Ditto. * sysdeps/unix/sysv/linux/fxstat.c: Replace #ifdef with #if on XSTAT_IS_XSTAT64 test. * sysdeps/unix/sysv/linux/fxstatat.c: Ditto. * sysdeps/unix/sysv/linux/generic/lxstat.c: Ditto. * sysdeps/unix/sysv/linux/generic/xstat.c: Ditto. * sysdeps/unix/sysv/linux/i386/fxstat.c: Ditto. * sysdeps/unix/sysv/linux/i386/fxstatat.c: Ditto. * sysdeps/unix/sysv/linux/i386/lxstat.c: Ditto. * sysdeps/unix/sysv/linux/i386/xstat.c: Ditto. * sysdeps/unix/sysv/linux/lxstat.c: Ditto. * sysdeps/unix/sysv/linux/mips/xstatconv.c: Ditto. * sysdeps/unix/sysv/linux/xstat.c: Ditto. * sysdeps/unix/sysv/linux/xstatconv.c: Ditto.
* Add setpayload, setpayloadf, setpayloadl.Joseph Myers2016-11-1948-7/+713
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayload functions for glibc; these set a number (pointed to by a function argument) to a quiet NaN with the given payload, or to +0 if the given payload is not valid. The implementations are structured to allow the substance of the implementation to be shared with the setpayloadsig functions when those are added. The semantics in the TS are not entirely clear in the case where the payload passed to the function is zero (see discussion on the WG14 reflector last month). This patch implements what seems the most sensible interpretation, that -0 is never valid to give as the payload, but +0 is valid in the case where the kind of NaN being generated has its high mantissa bit set so payload 0 is actually possible in such a NaN. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayload): New declaration. * math/Versions (setpayload): New libm symbol at version GLIBC_2.25. (setpayloadf): Likewise. (setpayloadl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadF. * math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct test_Ff_b1_data. (RUN_TEST_Ff_b1): New macro. (RUN_TEST_LOOP_Ff_b1): Likewise. (canonicalize_test_data): Update type. (setpayload_test_data): New array. (setpayload_test): New function. (main): Call setpayload_test. * manual/arith.texi (FP Bit Twiddling): Document setpayload, setpayloadf and setpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayload.c: New file. * sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayload. (CFLAGS-nldbl-setpayload.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Fix hurd __access_noerrno implementation.Adhemerval Zanella2016-11-184-33/+15
| | | | | | | | | | | | | | This patch fixes some hurd bits from commit afcf3cd8eb that added the __access_noerrno internal symbol. It basically removes the nonrequired __hurd_fail_noerrno (since the 'err' argument is ignored) and fixes a typo for EACCES. However, as stated on maillist [1] this __access_noerrno may still be unsafe to run during initialization of tunables on the Hurd. The access_common calls __hurd_file_name_lookup, which calls __hurd_file_name_lookup_retry, which can set errno. [1] https://sourceware.org/ml/libc-alpha/2016-11/msg00646.html
* tile: create new math-tests.h headerChris Metcalf2016-11-182-0/+32
| | | | | | | | | The header makes tile use the new mechanisms for suppressing exception and rounding support (the ROUNDING_TESTS_xxx() and EXCEPTION_TESTS_xxx macros). More importantly, it also now sets SNAN_TESTS_PRESERVE_PAYLOAD to 0, since the tilegx fp hardware does not preserve NaN payloads.
* Make tile's set_dataplane API compatibility-onlyChris Metcalf2016-11-184-40/+18
| | | | | | | | | | | | | | The set_dataplane() API in <sys/dataplane.h> originally supported the Tilera version of Linux as shipped to our customers. Once we started upstreaming the dataplane support in the kernel, the API changed to use fcntl() as part of the current task-isolation patch series. It doesn't seem like continuing to support the old API is useful for newly-compiled code, and even supporting the old glibc binary API on an upstream kernel that supports the new task isolation mode isn't straightforward, since the semantics have changed in ways that make it hard to map the old semantics precisely to the new ones, so just return ENOSYS.
* Quote shell commands in logs from build-many-glibcs.py.Joseph Myers2016-11-182-1/+17
| | | | | | | | | | | | | | As requested in <https://sourceware.org/ml/libc-alpha/2016-11/msg00664.html>, this patch makes the commands recorded in build-many-glibcs.py quote words so they can be cut-and-pasted back into a shell. (Note that these logs are generated by the wrapper script generated to run commands with logs, hence the needs for quoting logic to be implemented in that shell script.) * scripts/build-many-glibcs.py (Context.write_files): Make wrapper script quote words in command output to log suitably for input to the shell.
* MIPS: Add `.insn' to ensure a text label is defined as code not dataMaciej W. Rozycki2016-11-184-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid a build error with microMIPS compilation and recent versions of GAS which complain if a branch targets a label which is marked as data rather than microMIPS code: ../sysdeps/mips/mips32/crti.S: Assembler messages: ../sysdeps/mips/mips32/crti.S:72: Error: branch to a symbol in another ISA mode make[2]: *** [.../csu/crti.o] Error 1 as commit 9d862524f6ae ("MIPS: Verify the ISA mode and alignment of branch and jump targets") closed a hole in branch processing, making relocation calculation respect the ISA mode of the symbol referred. This allowed diagnosing the situation where an attempt is made to pass control from code assembled for one ISA mode to code assembled for a different ISA mode and either relaxing the branch to a cross-mode jump or if that is not possible, then reporting this as an error rather than letting such code build and then fail unpredictably at the run time. This however requires the correct annotation of branch targets as code, because the ISA mode is not relevant for data symbols and is therefore not recorded for them. The `.insn' pseudo-op is used for this purpose and has been supported by GAS since: Wed Feb 12 14:36:29 1997 Ian Lance Taylor <ian@cygnus.com> * config/tc-mips.c (mips_pseudo_table): Add "insn". (s_insn): New static function. * doc/c-mips.texi: Document .insn. so there has been no reason to avoid it where required. More recently this pseudo-op has been documented, by the microMIPS architecture specification[1][2], as required for the correct interpretation of any code label which is not followed by an actual instruction in an assembly source. Use it in our crti.S files then, to mark that the trailing label there with no instructions following is indeed not a code bug and the branch is legitimate. References: [1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32 Instruction Set", MIPS Technologies, Inc., Document Number: MD00582, Revision 5.04, January 15, 2014, Section 7.1 "Assembly-Level Compatibility", p. 533 [2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64 Instruction Set", MIPS Technologies, Inc., Document Number: MD00594, Revision 5.04, January 15, 2014, Section 8.1 "Assembly-Level Compatibility", p. 623 2016-11-18 Matthew Fortune <Matthew.Fortune@imgtec.com> Maciej W. Rozycki <macro@imgtec.com> * sysdeps/mips/mips32/crti.S (_init): Add `.insn' pseudo-op at `.Lno_weak_fn' label. * sysdeps/mips/mips64/n32/crti.S (_init): Likewise. * sysdeps/mips/mips64/n64/crti.S (_init): Likewise.
* Consolidate Linux setrlimit and getrlimit implementationAdhemerval Zanella2016-11-1742-147/+323
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch consolidates all Linux setrlimit and getrlimit on the default sysdeps/unix/sysv/linux/{set,get}rlimit{64}.c. It contains two exceptions: 1. mips32 and mips64n32 which requires a versioned symbol for GLIBC 2.19 and higher due a broken RLIM64_INFINITY constant. 2. sparc32 does not define a compat symbol for getrlimit64 for old 2GB limit. I am not sure if it is required, but a RLIM_INFINITY fix [1] change its definition without adding a compat symbol. This patch does not aim to address this possible issue, it follow current symbol export. The default implementation uses prlimit64 for 64 bit rlim_t ({set,get}rlimit64) and if it fails with ENOSYS it fall back to {get,set}rlimit syscall. This code path is only used on kernel older than 2.6.36 (basically now only x86) and I avoid to user __ASSUME_PRLIMTI64 to simplify the implementation. Once x86 moves to be on par with other architectures regarding minimum kernel supported we can get rid of using old syscalls and default path. A new type size define is added, __RLIM_T_MATCHES_RLIM64_T, where is set as default for 64 bits ports. This allows the default implementation to avoid {get,set}rlimit building and alias {get,set}rlimit64 to {get,set}rlimit. Checked on x86_64, i386, armhf, aarch64, and powerpc64le. I also did a sanity build plus check-abi on all other supported architectures. [1] Commit 9c96ff23858b0759e12ad69e3c4599931c90bee8 Adhemerval Zanella <adhemerval.zanella@linaro.org> Yury Norov <ynorov@caviumnetworks.com> * bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): define. * sysdeps/unix/sysv/linux/alpha/bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/generic/bits/typesizes.h (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/s390/bits/typesizes.h [__s390x__] (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/typesizes.h [__arch64__ || __sparcv9] (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/x86/bits/typesizes.h [__86_64__] (__RLIM_T_MATCHES_RLIM64_T): Likewise. * sysdeps/unix/sysv/linux/arm/Makefile [$(subdir) = resource] (sysdep_routines): Remove oldgetrlimit64. * sysdeps/unix/sysv/linux/i386/Makefile [$(subdir) = resource] (sysdep_routines): Likewise. * sysdeps/unix/sysv/linux/m68k/Makefile [$(subdir) = resource] (sysdep_routines): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile [$(subdir) = resource] (sysdep_routines): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/Makefile [$(subdir) = resource] (sysdep_routines): Likewise. * sysdeps/unix/sysv/linux/arm/getrlimit64.c: Remove file. * sysdeps/unix/sysv/linux/arm/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/hppa/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/i386/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/i386/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/m68k/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/m68k/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/oldgetrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/sh/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/setrlimit64.c: Likewise. * sysdeps/sysv/linux/generic/wordsize-32/syscalls.list: Remove setrlimit and getrlimit. * sysdeps/unix/sysv/linux/hppa/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/i386/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/wordsize-64/syscalls.list: Likewise. * sysdeps/unix/sysv/linux/getrlimit.c: New file. * sysdeps/unix/sysv/linux/sparc/getrlimit64.c: Likewise. * sysdeps/unix/sysv/linux/setrlimit.c: Likewise. * sysdeps/unix/sysv/linux/getrlimit64.c (__getrlimit64): Handle __RLIM_T_MATCHES_RLIM64_T and add alias if defined. (__old_getrlimit64): Add compatibility symbol. * sysdeps/unix/sysv/linux/setrlimit64.c (__setrlimit): Likewise.
* Actually use newly built host libraries in build-many-glibcs.py.Joseph Myers2016-11-172-0/+7
| | | | | | | | This patch adds the missing GCC configure options required to make use of the newly built host libraries in build-many-glibcs.py. * scripts/build-many-glibcs.py (Config.build_gcc): Configure with newly built gmp, mpfr and mpc.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-08-08 03:08:51 +0000