about summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
* Fix testing with read-only source directory.Joseph Myers2017-12-154-2/+10
| | | | | | | | | | | | | | | | | | | | | Three tests fail with a read-only source directory because they try to write into the source directory. None of these write into it in a way that should actually be problematic for concurrent builds sharing the same writable source directory, but avoiding any writing into the source directory (from testing, or from building glibc if the source timestamps are properly ordered) is still a good idea, as being able to build with read-only sources helps make sure there isn't anything that could cause problems for concurrent builds. This patch changes the tests in question to use either /tmp or the build directory to write their temporary files (or to test O_TMPFILE, as applicable). Tested for x86_64. * io/Makefile (tst-open-tmpfile-ARGS): New variable. * posix/tst-mmap-offset.c (fname): Use /tmp. * stdlib/tst-setcontext3.sh (tempfile): Use ${objpfx}.
* Increase buffer size due to warning from ToT GCCSteve Ellcey2017-12-152-1/+5
| | | | * nscd/dbg_log.c (dbg_log): Increase msg buffer size.
* Don't set errno in Hurd rtld's __access_noerrnoThomas Schwinge2017-12-152-1/+5
| | | | | | | | | * sysdeps/mach/hurd/dl-sysdep.c (__access_noerrno): Don't set errno. Fixes commit 819ea3347e3a30a611488ceeec53650baaeb7961. Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* Correct build-many-glibcs.py arm-linux-gnueabihf configurations.Joseph Myers2017-12-152-2/+7
| | | | | | | | | | | | | | The conventional configure triplet for ARM GNU/Linux with hard-float ABI is arm-*-linux-gnueabihf. However, GCC does not automatically use the hard-float ABI based on that triplet. This patch fixes build-many-glibcs.py to pass --with-float=hard so that the arm-linux-gnueabihf configurations actually build with the intended ABI. Tested building the affected configurations with build-many-glibcs.py. * scripts/build-many-glibcs.py (Context.add_all_configs): Use --with-float=hard for arm-linux-gnueabihf configurations.
* Do not build .mo files in source directory (bug 14121).Joseph Myers2017-12-152-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building and installing glibc leaves .mo files (compiled message translations) behind in the source directory. Building those files in the source directory may once have made sense, if they were included in release tarballs; now that release tarballs are just the output of "git archive", building any non-checked-in files in the source directory does not make sense. This patch changes these files to be built in the build directory instead. The realclean rule is changed to simply adding the .mo files to the "generated" variable, since once the files are in the build directory it make no sense to exclude them from normal cleanup rules. This is necessary but not sufficient to avoid build-many-glibcs.py needing to copy the glibc source directory. Its list of files to touch on checkout to avoid subsequent regeneration (configure, preconfigure, *-kw.h) is incomplete (missing at least INSTALL, sysdeps/gnu/errlist.c, posix/testcases.h, posix/ptestcases.h, locale/C-translit.h, (only regenerated for Hurd builds) sysdeps/mach/hurd/bits/errno.h, (only regenerated for 32-bit SPARC builds) sysdeps/sparc/sparc32/{sdiv,udiv,rem,urem}.S) - the existing list may be sufficient to prevent regeneration that actually changes the file contents depending on the installed build tools, but not to ensure there is no regeneration at all - and there might well be other things writing into the source directory in the course of building and testing (so needing appropriate testing with read-only source directories with different timestamp orderings to find and eliminate all such cases). Tested for x86_64. [BZ #14121] * po/Makefile (generated): Add $(ALL_LINGUAS:%=%.mo). (%.mo): Change to $(objpfx)%.mo. Use $(make-target-directory). ($(mo-installed)): Use $(objpfx)%.mo. (realclean): Remove rule.
* Remove old po/ code for copying .po files from shared directory.Joseph Myers2017-12-152-21/+7
| | | | | | | | | | | | | | | | | po/Makefile has both old code for copying .po files from a shared directory /com/share/ftp/gnu/po/maint/glibc (presumably once present on some GNU server), and new code for downloading them from the Translation Project. This patch removes the old code, leading only the new code. Tested for x86_64. * po/Makefile (linguas): Remove rule and dependencies. (linguas.mo): Likewise. (.PHONY): Do not depend on linguas and linguas.mo. (podir): Remove variable. (pofiles): Likewise. [$(pofiles)] (%.po): Remove rule.
* Update SPARC divrem generation to match output.Joseph Myers2017-12-157-11/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While working on another patch I noticed that (a) sysdeps/sparc/sparc32/Makefile is the only place with special realclean settings, apart from po/, and (b) the generated files with a rule in that Makefile to generate them (using m4) had been patched manually so no longer corresponded with the output of the generator - so if the timestamps were wrong, a build would result in changes to the files in the source directory. (They also didn't correspond because of changes in make 3.81 to how make handles whitespace at the start of a line in a sequence of backslash-newline continuation lines within a recipe.) This patch fixes the generation and output files to match. The issue with make and whitespace at start of continuation lines is fixed by putting those newlines outside of arguments to echo, so the number of spaces in the argument matches the number in the existing generated files. Then divrem.m4 is changed to avoid generating whitespace-only lines (my fix to the outputs from 2013; this fix to the generator also changes the indentation of a label in the output files) and to generate an alias in udiv.S (Adhemerval's fix from March). build-many-glibcs.py doesn't have a non-v9 SPARC configuration, because non-v9 32-bit SPARC didn't build when I set up build-many-glibcs.py but sparcv9 did build. Whether or not non-v9 32-bit SPARC now builds (or indeed whether or not support for it is obsolete), I tested by removing the sparcv8 and sparcv9 versions of the four files in question, so forcing the generated files to be built and used, and the compilation parts of the glibc testsuite passed. * sysdeps/sparc/sparc32/Makefile ($(divrem:%=$(sysdep_dir)/sparc/sparc32/%.S)): Do not include start-of-line whitespace in argument of echo. * sysdeps/sparc/sparc32/divrem.m4: Avoid generating lines starting with whitespace. Generate __wrap_.udiv alias. * sysdeps/sparc/sparc32/rem.S: Regenerated. * sysdeps/sparc/sparc32/sdiv.S: Likewise. * sysdeps/sparc/sparc32/udiv.S: Likewise. * sysdeps/sparc/sparc32/urem.S: Likewise.
* powerpc: st{r,p}cpy optimization for aligned stringsRajalakshmi Srinivasaraghavan2017-12-152-3/+151
| | | | | | | This patch makes use of vectors for aligned inputs. Improvements upto 30% seen for larger aligned inputs. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
* Convert strcmp benchmark output to json formatSiddhesh Poyarekar2017-12-152-27/+53
| | | | The format is now parseable with the compare_strings.py script.
* Remove redundant mention of SXID_ERASESiddhesh Poyarekar2017-12-152-10/+5
| | | | | | | SXID_ERASE is implicit for all environment variables. Avoid mentioning it in the tunables list; that way only the ones with SXID_IGNORE remain prominent and mentioned. TODO: we need to audit each of those cases and drop them to SXID_ERASE wherever possible.
* elf: Count components of the expanded path in _dl_init_path [BZ #22607]Florian Weimer2017-12-143-9/+17
|
* elf: Compute correct array size in _dl_init_paths [BZ #22606]Florian Weimer2017-12-143-7/+20
|
* support: Simplify compiling most of support/ outside of glibcFlorian Weimer2017-12-1412-2/+25
| | | | | | | Some include files were missing because they are implied by the in-tree build process. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* x86-64: Remove sysdeps/x86_64/fpu/s_cosf.SH.J. Lu2017-12-142-533/+4
| | | | | | | | | | | On Ivy Bridge, bench-cosf reports performance improvement: s_cosf.S s_cosf.c Improvement max 114.136 82.401 39% min 13.119 11.301 16% mean 22.1882 21.8938 1% * sysdeps/x86_64/fpu/s_cosf.S: Removed.
* sparc: M7 optimized memset/bzeroPatrick McGehearty2017-12-148-2/+361
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support added to identify Sparc M7/T7/S7/M8/T8 processor capability. Performance tests run on Sparc S7 using new code and old niagara4 code. Optimizations for memset also apply to bzero as they share code. For memset/bzero, performance comparison with niagara4 code: For memset nonzero data, 256-1023 bytes - 60-90% gain (in cache); 5% gain (out of cache) 1K+ bytes - 80-260% gain (in cache); 40-80% gain (out of cache) For memset zero data (and bzero), 256-1023 bytes - 80-120% gain (in cache), 0% gain (out of cache) 1024+ bytes - 2-4x gain (in cache), 10-35% gain (out of cache) Tested in sparcv9-*-* and sparc64-*-* targets in both multi and non-multi arch configurations. Patrick McGehearty <patrick.mcgehearty@oracle.com> Adhemerval Zanella <adhemerval.zanella@linaro.org> * sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile (sysdeps_routines): Add memset-niagara7. * sysdeps/sparc/sparc64/multiarch/Makefile (sysdes_rotuines): Likewise. * sysdeps/sparc/sparc32/sparcv9/multiarch/memset-niagara7.S: New file. * sysdeps/sparc/sparc64/multiarch/memset-niagara7.S: Likewise. * sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add __bzero_niagara7 and __memset_niagara7. * sysdeps/sparc/sparc64/multiarch/ifunc-memset.h (IFUNC_SELECTOR): Add niagara7 option. * NEWS: Mention sparc m7 optimized memcpy, mempcpy, memmove, and memset.
* sparc: M7 optimized memcpy/mempcpy/memmovePatrick McGehearty2017-12-1413-2/+1094
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support added to identify Sparc M7/T7/S7/M8/T8 processor capability. Performance tests run on Sparc S7 using new code and old niagara4 code. Optimizations for memcpy also apply to mempcpy and memmove where they share code. Optimizations for memset also apply to bzero as they share code. For memcpy/mempcpy/memmove, performance comparison with niagara4 code: Long word aligned data 0-127 bytes - minimal changes 128-1023 bytes - 7-30% gain 1024+ bytes - 1-7% gain (in cache); 30-100% gain (out of cache) Word aligned data 0-127 bytes - 50%+ gain 128-1023 bytes - 10-200% gain 1024+ bytes - 0-15% gain (in cache); 5-50% gain (out of cache) Unaligned data 0-127 bytes - 0-70%+ gain 128-447 bytes - 40-80%+ gain 448-511 bytes - 1-3% loss 512-4096 bytes - 2-3% gain (in cache); 0-20% gain (out of cache) 4096+ bytes - ± 3% (in cache); 20-50% gain (out of cache) Tested in sparcv9-*-* and sparc64-*-* targets in both multi and non-multi arch configurations. Patrick McGehearty <patrick.mcgehearty@oracle.com> Adhemerval Zanella <adhemerval.zanella@linaro.org> * sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile (sysdeps_routines): Add memcpy-memmove-niagara7 and memmove-ultra1. * sysdeps/sparc/sparc64/multiarch/Makefile (sysdeps_routines): Likewise. * sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy-memmove-niagara7.S: New file. * sysdeps/sparc/sparc32/sparcv9/multiarch/memmove-ultra1.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/multiarch/rtld-memmove.c: Likewise. * sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add __memcpy_niagara7, __mempcpy_niagara7, and __memmove_niagara7. * sysdeps/sparc/sparc64/multiarch/ifunc-memcpy.h (IFUNC_SELECTOR): Add niagara7 option. * sysdeps/sparc/sparc64/multiarch/memmove.c: New file. * sysdeps/sparc/sparc64/multiarch/ifunc-memmove.h: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-memmove-niagara7.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memmove-ultra1.S: Likewise. * sysdeps/sparc/sparc64/multiarch/rtld-memmove.c: Likewise.
* sparc: assembly version of memmove for ultra1+Jose E. Marchesi2017-12-145-0/+196
| | | | | | | | | | | | Tested in sparcv9-*-* and sparc64-*-* targets in both non-multi-arch and multi-arch configurations. * sysdeps/sparc/sparc32/sparcv9/memmove.S: New file. * sysdeps/sparc/sparc32/sparcv9/rtld-memmove.c: Likewise. * sysdeps/sparc/sparc64/memmove.S: Likewise. * sysdeps/sparc/sparc64/rtld-memmove.c: Likewise. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sparc: support the ADP hw capabilityJose E. Marchesi2017-12-144-3/+11
| | | | | | | | | | | | | | | This patch adds support for the ADP (also known as adi) hardware capability, as reported by the kernel sparc port when running on M7 machines. Tested in both sparcv9-*-* and sparc64-*-* targets. * sysdeps/sparc/bits/hwcap.h (HWCAP_SPARC_ADP): Defined. * sysdeps/sparc/dl-procinfo.c: Added "adp" to the _dl_sparc_cap_flags array. * sysdeps/sparc/dl-procinfo.h (_DL_HWCAP_COUNT): Increment. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* aarch64: Improve strcmp unaligned performanceSiddhesh Poyarekar2017-12-132-2/+34
| | | | | | | | | | | | | | Replace the simple byte-wise compare in the misaligned case with a dword compare with page boundary checks in place. For simplicity I've chosen a 4K page boundary so that we don't have to query the actual page size on the system. This results in up to 3x improvement in performance in the unaligned case on falkor and about 2.5x improvement on mustang as measured using bench-strcmp. * sysdeps/aarch64/strcmp.S (misaligned8): Compare dword at a time whenever possible.
* Fix testing with nss-crypt.Carlos O'Donell2017-12-122-1/+6
| | | | | | | | | | | | | | | | | | A glibc master build with --enable-nss-crypt using the NSS crypto libraries fails during make check with the following error: <command-line>:0:0: error: "USE_CRYPT" redefined [-Werror] <command-line>:0:0: note: this is the location of the previous definition This is caused by commit 36975e8e7ea227f7006abdc722ecfefe2079429b by H.J. Lu which replaces all = with +=. The fix is to undefine USE_CRYPT before defining it to zero. Committed as an obvious fix. Fixes the build issue on x86_64 with no regressions. Signed-off-by: Carlos O'Donell <carlos@redhat.com>
* Add sysdeps/ieee754/soft-fp.Joseph Myers2017-12-1233-39/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default sysdeps/ieee754 fma implementations rely on exceptions and rounding modes to achieve correct results through internal use of round-to-odd. Thus, glibc configurations without support for exceptions and rounding modes instead need to use implementations of fma based on soft-fp. At present, this is achieved via having implementation files in soft-fp/ that are #included by sysdeps files for each glibc configuration that needs them. In general this means such a configuration has its own s_fma.c and s_fmaf.c. TS 18661-1 adds functions that do an operation (+ - * / sqrt fma) on arguments wider than the return type, with a single rounding of the infinite-precision result to that return type. These are also naturally implemented using round-to-odd on platforms with hardware support for rounding modes and exceptions but lacking hardware support for these narrowing operations themselves. (Platforms that have direct hardware support for such narrowing operations include at least ia64, and Power ISA 2.07 or later, which I think means POWER8 or later.) So adding the remaining TS 18661-1 functions would mean at least six narrowing function implementations (fadd fsub fmul fdiv ffma fsqrt), with aliases for other types and further implementations in some configurations, that need to be overridden for configurations lacking hardware exceptions and rounding modes. Requiring all such configurations (currently seven of them) to have their own source files for all those functions seems undesirable. Thus, this patch adds a directory sysdeps/ieee754/soft-fp to contain libm function implementations based on soft-fp. This directory is then used via Implies from all the configurations that need it, so no more files need adding to every such configuration when adding more functions with soft-fp implementations. A configuration can still selectively #include a particular file from this directory if desired; thus, the MIPS #include of the fmal implementation is retained, since that's appropriate even for hard float (because long double is always implementated in software for MIPS64, so the soft-fp implementation of fmal is better than the ldbl-128 one). This also provides additional motivation for my recent patch removing --with-fp / --without-fp: previously there was no need for correct use of --without-fp for no-FPU ARM or SH3, and now we have autodetection nofpu/ sysdeps directories can be used by this patch for those configurations without imposing any new requirements on how glibc is configured. (The mips64/*/fpu/s_fma.c files added by this patch are needed to keep the dbl-64 version of fma for double, rather than the ldbl-128 one, used in that case.) Tested with build-many-glibcs.py that installed stripped shared libraries are unchanged by this patch. * soft-fp/fmadf4.c: Move to .... * sysdeps/ieee754/soft-fp/s_fma.c: ... here. * soft-fp/fmasf4.c: Move to .... * sysdeps/ieee754/soft-fp/s_fmaf.c: ... here. * soft-fp/fmatf4.c: Move to .... * sysdeps/ieee754/soft-fp/s_fmal.c: ... here. * sysdeps/ieee754/soft-fp/Makefile: New file. * sysdeps/arm/preconfigure.ac: Define with_fp_cond. * sysdeps/arm/preconfigure: Regenerated. * sysdeps/arm/nofpu/Implies: New file. * sysdeps/arm/s_fma.c: Remove file. * sysdeps/arm/s_fmaf.c: Likewise. * sysdeps/m68k/coldfire/nofpu/Implies: New file. * sysdeps/m68k/coldfire/nofpu/s_fma.c: Remove file. * sysdeps/m68k/coldfire/nofpu/s_fmaf.c: Likewise. * sysdeps/microblaze/Implies: Add ieee754/soft-fp. * sysdeps/microblaze/s_fma.c: Remove file. * sysdeps/microblaze/s_fmaf.c: Likewise. * sysdeps/mips/mips32/nofpu/Implies: New file. * sysdeps/mips/mips64/n32/fpu/s_fma.c: Likewise. * sysdeps/mips/mips64/n32/nofpu/Implies: Likewise. * sysdeps/mips/mips64/n64/fpu/s_fma.c: Likewise. * sysdeps/mips/mips64/n64/nofpu/Implies: Likewise. * sysdeps/mips/ieee754/s_fma.c: Remove file. * sysdeps/mips/ieee754/s_fmaf.c: Likewise. * sysdeps/mips/ieee754/s_fmal.c: Update include for move of fmal implementation. * sysdeps/nios2/Implies: Add ieee754/soft-fp. * sysdeps/nios2/s_fma.c: Remove file. * sysdeps/nios2/s_fmaf.c: Likewise. * sysdeps/sh/nofpu/Implies: New file. * sysdeps/sh/s_fma.c: Remove file. * sysdeps/sh/s_fmaf.c: Likewise. * sysdeps/tile/Implies: Add ieee754/soft-fp. * sysdeps/tile/s_fma.c: Remove file. * sysdeps/tile/s_fmaf.c: Likewise.
* x86-64: Add cosf with FMAH.J. Lu2017-12-126-4/+47
| | | | | | | | | | | | | | | | | | On Skylake, bench-cosf reports performance improvement: Before After Improvement max 135.362 94.552 43% min 8.532 7.688 11% mean 17.1446 11.8128 45% * sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_cosf-sse2 and s_cosf-fma. (CFLAGS-s_cosf-fma.c): New. * sysdeps/x86_64/fpu/multiarch/s_cosf-fma.c: New file. * sysdeps/x86_64/fpu/multiarch/s_cosf-sse2.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_cosf.c: Likewise. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use memcpy instead of strncpy in nscd/nscd.h to fix build problem with ToT GCCSteve Ellcey2017-12-122-1/+5
| | | | * nscd/nscd.h (init_traced_file): Change strncpy to memcpy.
* libio: Free backup area when it not required (BZ#22415)Adhemerval Zanella2017-12-125-2/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some libio operations fail to correctly free the backup area (created by _IO_{w}default_pbackfail on unget{w}c) resulting in either invalid buffer free operations or memory leaks. For instance, on the example provided by BZ#22415 a following fputc after a fseek to rewind the stream issues an invalid free on the buffer. It is because although _IO_file_overflow correctly (from fputc) correctly calls _IO_free_backup_area, the _IO_new_file_seekoff (called by fseek) updates the FILE internal pointers without first free the backup area (resulting in invalid values in the internal pointers). The wide version also shows an issue, but instead of accessing invalid pointers it leaks the backup memory on fseek/fputwc operation. Checked on x86_64-linux-gnu and i686-linux-gnu. * libio/Makefile (tests): Add tst-bz22415. (tst-bz22415-ENV): New rule. (generated): Add tst-bz22415.mtrace and tst-bz22415.check. (tests-special): Add tst-bz22415-mem.out. ($(objpfx)tst-bz22415-mem.out): New rule. * libio/fileops.c (_IO_new_file_seekoff): Call _IO_free_backup_area in case of a successful seek operation. * libio/wfileops.c (_IO_wfile_seekoff): Likewise. (_IO_wfile_overflow): Call _IO_free_wbackup_area in case a write buffer is required. * libio/tst-bz22415.c: New test.
* Update IA64 libm-test-ulpsAdhemerval Zanella2017-12-122-26/+1918
| | | | | | | | Ran on Itanium Processor 9020, GCC 7.2.1. * sysdeps/ia64/fpu/libm-test-ulps: Update. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* ia64: Add ipc_priv.h header to set __IPC_64 to zeroJames Clarke2017-12-122-0/+26
| | | | | | | | | | | | When running strace, IPC_64 was set in the command, but ia64 is an architecture where CONFIG_ARCH_WANT_IPC_PARSE_VERSION *isn't* set in the kernel, so ipc_parse_version just returns IPC_64 without clearing the IPC_64 bit in the command. * sysdeps/unix/sysv/linux/ia64/ipc_priv.h: New file defining __IPC_64 to 0 to avoid IPC_64 being set. Signed-off-by: James Clarke <jrtc27@jrtc27.com>
* [BZ #22593] Fix nextafter and nexttoward declarationSzabolcs Nagy2017-12-122-2/+8
| | | | | | | | These functions set errno and thus the const attribute was wrong. [BZ #22593] * math/bits/mathcalls.h (nextafter): Remove const. (nexttoward): Likewise.
* Remove --with-fp / --without-fp.Joseph Myers2017-12-1212-66/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a configure option --without-fp that specifies that nofpu sysdeps directories should be used instead of fpu directories. For most glibc configurations, this option is of no use: either there is no valid nofpu variant of that configuration, or there are no fpu or nofpu sysdeps directories for that processor and so the option does nothing. For a few configurations, if you are using a soft-float compiler this option is required, and failing to use it generally results in compilation errors from inline asm using unavailable floating-point instructions. We're moving away from --with-cpu to configuring glibc based on how the compiler generates code, and it is natural to do so for --without-fp as well; in most cases the soft-float and hard-float ABIs are incompatible so you have no hope of building a working glibc with an inappropriately configured compiler or libgcc. This patch eliminates --without-fp, replacing it entirely by automatic configuration based on the compiler. Configurations for which this is relevant (coldfire / mips / powerpc32 / sh) define a variable with_fp_cond in their preconfigure fragments (under the same conditions under which those fragments do anything); this is a preprocessor conditional which the toplevel configure script then uses in a test to determine which sysdeps directories to use. The config.make with-fp variable remains. It's used only by powerpc (sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various flags variables. For powerpc, -mcpu= options can imply use of soft-float. That could be an issue if you want to build for e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp sysdeps directory. If in future we eliminate --with-cpu and replace it entirely by testing the compiler, it would be natural at that point to eliminate that code as well (as the user should then just use a compiler defaulting to 476fp and the 476 sysdeps directory would be used automatically). Tested for x86_64, and tested with build-many-glibcs.py that installed shared libraries are unchanged by this patch. * configure.ac (--with-fp): Remove configure option. (with_fp_cond): New variable. (libc_cv_with_fp): New configure test. Use this variable instead of with_fp. * configure: Regenerated. * config.make.in (with-fp): Use @libc_cv_with_fp@. * manual/install.texi (Configuring and compiling): Remove --without-fp. * INSTALL: Regenerated. * sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire. * sysdeps/mips/preconfigure (with_fp_cond): Define. * sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit. * sysdeps/sh/preconfigure (with_fp_cond): Define. * scripts/build-many-glibcs.py (Context.add_all_configs): Do not use --without-fp to configure glibc.
* manual: Fix a typo in locale.texi.Rical Jasan2017-12-122-1/+5
| | | | * manual/locale.texi (nl_langinfo): Fix a typo.
* manual/conf.texi: add a missing underscore in front of SC_SSIZE_MAX [BZ #22588]Aurelien Jarno2017-12-122-1/+6
| | | | | Changelog: * manual/conf.texi (SC_SSIZE_MAX): Rename into _SC_SSIZE_MAX.
* Replace = with += in CFLAGS-xxx.c/CPPFLAGS-xxx.cH.J. Lu2017-12-1134-496/+984
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace = with += in CFLAGS-xxx.c and CPPFLAGS-xxx.c to allow Makefile under sysdeps to define CFLAGS-xx.c and CPPFLAGS-xxx.c. * argp/Makefile (CFLAGS-argp-help.c): Replace = with +=. (CFLAGS-argp-parse.c): Likewise. (CFLAGS-argp-fmtstream.c): Likewise. * crypt/Makefile (CPPFLAGS-sha256-crypt.c): Likewise. (CPPFLAGS-sha512-crypt.c): Likewise. (CPPFLAGS-md5-crypt.c): Likewise. * debug/Makefile (CFLAGS-stack_chk_fail.c): Likewise. (CFLAGS-stack_chk_fail_local.c): Likewise. (CFLAGS-backtrace.c): Likewise. (CFLAGS-sprintf_chk.c): Likewise. (CFLAGS-snprintf_chk.c): Likewise. (CFLAGS-vsprintf_chk.c): Likewise. (CFLAGS-vsnprintf_chk.c): Likewise. (CFLAGS-asprintf_chk.c): Likewise. (CFLAGS-vasprintf_chk.c): Likewise. (CFLAGS-obprintf_chk.c): Likewise. (CFLAGS-dprintf_chk.c): Likewise. (CFLAGS-vdprintf_chk.c): Likewise. (CFLAGS-printf_chk.c): Likewise. (CFLAGS-fprintf_chk.c): Likewise. (CFLAGS-vprintf_chk.c): Likewise. (CFLAGS-vfprintf_chk.c): Likewise. (CFLAGS-gets_chk.c): Likewise. (CFLAGS-fgets_chk.c): Likewise. (CFLAGS-fgets_u_chk.c): Likewise. (CFLAGS-fread_chk.c): Likewise. (CFLAGS-fread_u_chk.c): Likewise. (CFLAGS-swprintf_chk.c): Likewise. (CFLAGS-vswprintf_chk.c): Likewise. (CFLAGS-wprintf_chk.c): Likewise. (CFLAGS-fwprintf_chk.c): Likewise. (CFLAGS-vwprintf_chk.c): Likewise. (CFLAGS-vfwprintf_chk.c): Likewise. (CFLAGS-fgetws_chk.c): Likewise. (CFLAGS-fgetws_u_chk.c): Likewise. (CFLAGS-read_chk.c): Likewise. (CFLAGS-pread_chk.c): Likewise. (CFLAGS-pread64_chk.c): Likewise. (CFLAGS-recv_chk.c): Likewise. (CFLAGS-recvfrom_chk.c): Likewise. (CFLAGS-tst-longjmp_chk.c): Likewise. (CPPFLAGS-tst-longjmp_chk.c): Likewise. (CFLAGS-tst-longjmp_chk2.c): Likewise. (CPPFLAGS-tst-longjmp_chk2.c): Likewise. (CFLAGS-tst-longjmp_chk3.c): Likewise. (CPPFLAGS-tst-longjmp_chk3.c): Likewise. (CFLAGS-tst-chk1.c): Likewise. (CFLAGS-tst-chk2.c): Likewise. (CFLAGS-tst-chk3.c): Likewise. (CFLAGS-tst-chk4.cc): Likewise. (CFLAGS-tst-chk5.cc): Likewise. (CFLAGS-tst-chk6.cc): Likewise. (CFLAGS-tst-lfschk1.c): Likewise. (CFLAGS-tst-lfschk2.c): Likewise. (CFLAGS-tst-lfschk3.c): Likewise. (CFLAGS-tst-lfschk4.cc): Likewise. (CFLAGS-tst-lfschk5.cc): Likewise. (CFLAGS-tst-lfschk6.cc): Likewise. (CFLAGS-tst-ssp-1.c): Likewise. * dirent/Makefile (CFLAGS-scandir.c): Likewise. (CFLAGS-scandir64.c): Likewise. (CFLAGS-scandir-tail.c): Likewise. (CFLAGS-scandir64-tail.c): Likewise. * elf/Makefile (CPPFLAGS-dl-tunables.c): Likewise. (CFLAGS-dl-tunables.c): Likewise. (CFLAGS-dl-runtime.c): Likewise. (CFLAGS-dl-lookup.c): Likewise. (CFLAGS-dl-iterate-phdr.c): Likewise. (CFLAGS-vismain.c): Likewise. (CFLAGS-tst-linkall-static.c): Likewise. (CFLAGS-tst-linkall-static.c): Likewise. (CPPFLAGS-dl-load.c): Likewise. (CFLAGS-ldconfig.c): Likewise. (CFLAGS-dl-cache.c): Likewise. (CFLAGS-cache.c): Likewise. (CFLAGS-rtld.c): Likewise. (CFLAGS-multiload.c): Likewise. (CFLAGS-filtmod1.c): Likewise. (CFLAGS-tst-align.c): Likewise. (CFLAGS-tst-align2.c): Likewise. (CFLAGS-tst-alignmod.c): Likewise. (CFLAGS-tst-alignmod2.c): Likewise. (CPPFLAGS-tst-execstack.c): Likewise. (CFLAGS-tst-ptrguard1-static.c): Likewise. (CFLAGS-tst-latepthreadmod.c): Likewise. * grp/Makefile (CFLAGS-getgrgid_r.c): Likewise. (CFLAGS-getgrnam_r.c): Likewise. (CFLAGS-getgrent_r.c): Likewise. (CFLAGS-getgrent.c): Likewise. (CFLAGS-fgetgrent.c): Likewise. (CFLAGS-fgetgrent_r.c): Likewise. (CFLAGS-putgrent.c): Likewise. (CFLAGS-initgroups.c): Likewise. (CFLAGS-getgrgid.c): Likewise. * gshadow/Makefile (CFLAGS-getsgent_r.c): Likewise. (CFLAGS-getsgent.c): Likewise. (CFLAGS-fgetsgent.c): Likewise. (CFLAGS-fgetsgent_r.c): Likewise. (CFLAGS-putsgent.c): Likewise. (CFLAGS-getsgnam.c): Likewise. (CFLAGS-getsgnam_r.c): Likewise. * iconv/Makefile (CFLAGS-iconv_prog.c): Likewise. (CFLAGS-iconv_charmap.c): Likewise. (CFLAGS-dummy-repertoire.c): Likewise. (CFLAGS-charmap.c): Likewise. (CFLAGS-linereader.c): Likewise. (CFLAGS-simple-hash.c): Likewise. (CFLAGS-gconv_conf.c): Likewise. (CFLAGS-iconvconfig.c): Likewise. * inet/Makefile (CFLAGS-gethstbyad_r.c): Likewise. (CFLAGS-gethstbyad.c): Likewise. (CFLAGS-gethstbynm_r.c): Likewise. (CFLAGS-gethstbynm.c): Likewise. (CFLAGS-gethstbynm2_r.c): Likewise. (CFLAGS-gethstbynm2.c): Likewise. (CFLAGS-gethstent_r.c): Likewise. (CFLAGS-gethstent.c): Likewise. (CFLAGS-rcmd.c): Likewise. (CFLAGS-getnetbynm_r.c): Likewise. (CFLAGS-getnetbynm.c): Likewise. (CFLAGS-getnetbyad_r.c): Likewise. (CFLAGS-getnetbyad.c): Likewise. (CFLAGS-getnetent_r.c): Likewise. (CFLAGS-getnetent.c): Likewise. (CFLAGS-getaliasent_r.c): Likewise. (CFLAGS-getaliasent.c): Likewise. (CFLAGS-getrpcent_r.c): Likewise. (CFLAGS-getrpcent.c): Likewise. (CFLAGS-getservent_r.c): Likewise. (CFLAGS-getservent.c): Likewise. (CFLAGS-getprtent_r.c): Likewise. (CFLAGS-getprtent.c): Likewise. (CFLAGS-either_ntoh.c): Likewise. (CFLAGS-either_hton.c): Likewise. (CFLAGS-getnetgrent.c): Likewise. (CFLAGS-getnetgrent_r.c): Likewise. (CFLAGS-tst-checks-posix.c): Likewise. (CFLAGS-tst-sockaddr.c): Likewise. * intl/Makefile (CFLAGS-tst-gettext.c): Likewise. (CFLAGS-tst-translit.c): Likewise. (CFLAGS-tst-gettext2.c): Likewise. (CFLAGS-tst-codeset.c): Likewise. (CFLAGS-tst-gettext3.c): Likewise. (CFLAGS-tst-gettext4.c): Likewise. (CFLAGS-tst-gettext5.c): Likewise. (CFLAGS-tst-gettext6.c): Likewise. * io/Makefile (CFLAGS-open.c): Likewise. (CFLAGS-open64.c): Likewise. (CFLAGS-creat.c): Likewise. (CFLAGS-creat64.c): Likewise. (CFLAGS-fcntl.c): Likewise. (CFLAGS-poll.c): Likewise. (CFLAGS-ppoll.c): Likewise. (CFLAGS-lockf.c): Likewise. (CFLAGS-statfs.c): Likewise. (CFLAGS-fstatfs.c): Likewise. (CFLAGS-statvfs.c): Likewise. (CFLAGS-fstatvfs.c): Likewise. (CFLAGS-fts.c): Likewise. (CFLAGS-fts64.c): Likewise. (CFLAGS-ftw.c): Likewise. (CFLAGS-ftw64.c): Likewise. (CFLAGS-lockf.c): Likewise. (CFLAGS-posix_fallocate.c): Likewise. (CFLAGS-posix_fallocate64.c): Likewise. (CFLAGS-fallocate.c): Likewise. (CFLAGS-fallocate64.c): Likewise. (CFLAGS-read.c): Likewise. (CFLAGS-write.c): Likewise. (CFLAGS-test-stat.c): Likewise. (CFLAGS-test-lfs.c): Likewise. * libio/Makefile (CFLAGS-fileops.c): Likewise. (CFLAGS-fputc.c): Likewise. (CFLAGS-fputwc.c): Likewise. (CFLAGS-freopen64.c): Likewise. (CFLAGS-freopen.c): Likewise. (CFLAGS-fseek.c): Likewise. (CFLAGS-fseeko64.c): Likewise. (CFLAGS-fseeko.c): Likewise. (CFLAGS-ftello64.c): Likewise. (CFLAGS-ftello.c): Likewise. (CFLAGS-fwide.c): Likewise. (CFLAGS-genops.c): Likewise. (CFLAGS-getc.c): Likewise. (CFLAGS-getchar.c): Likewise. (CFLAGS-getwc.c): Likewise. (CFLAGS-getwchar.c): Likewise. (CFLAGS-iofclose.c): Likewise. (CFLAGS-iofflush.c): Likewise. (CFLAGS-iofgetpos64.c): Likewise. (CFLAGS-iofgetpos.c): Likewise. (CFLAGS-iofgets.c): Likewise. (CFLAGS-iofgetws.c): Likewise. (CFLAGS-iofputs.c): Likewise. (CFLAGS-iofputws.c): Likewise. (CFLAGS-iofread.c): Likewise. (CFLAGS-iofsetpos64.c): Likewise. (CFLAGS-iofsetpos.c): Likewise. (CFLAGS-ioftell.c): Likewise. (CFLAGS-iofwrite.c): Likewise. (CFLAGS-iogetdelim.c): Likewise. (CFLAGS-iogetline.c): Likewise. (CFLAGS-iogets.c): Likewise. (CFLAGS-iogetwline.c): Likewise. (CFLAGS-ioputs.c): Likewise. (CFLAGS-ioseekoff.c): Likewise. (CFLAGS-ioseekpos.c): Likewise. (CFLAGS-iosetbuffer.c): Likewise. (CFLAGS-iosetvbuf.c): Likewise. (CFLAGS-ioungetc.c): Likewise. (CFLAGS-ioungetwc.c): Likewise. (CFLAGS-oldfileops.c): Likewise. (CFLAGS-oldiofclose.c): Likewise. (CFLAGS-oldiofgetpos64.c): Likewise. (CFLAGS-oldiofgetpos.c): Likewise. (CFLAGS-oldiofsetpos64.c): Likewise. (CFLAGS-oldiofsetpos.c): Likewise. (CFLAGS-peekc.c): Likewise. (CFLAGS-putc.c): Likewise. (CFLAGS-putchar.c): Likewise. (CFLAGS-putwc.c): Likewise. (CFLAGS-putwchar.c): Likewise. (CFLAGS-rewind.c): Likewise. (CFLAGS-wfileops.c): Likewise. (CFLAGS-wgenops.c): Likewise. (CFLAGS-oldiofopen.c): Likewise. (CFLAGS-iofopen.c): Likewise. (CFLAGS-iofopen64.c): Likewise. (CFLAGS-oldtmpfile.c): Likewise. (CFLAGS-tst_putwc.c): Likewise. * locale/Makefile (CFLAGS-md5.c): Likewise. (CFLAGS-charmap.c): Likewise. (CFLAGS-locfile.c): Likewise. (CFLAGS-charmap-dir.c): Likewise. * login/Makefile (CFLAGS-grantpt.c): Likewise. (CFLAGS-getpt.c): Likewise. (CFLAGS-pt_chown.c): Likewise. * malloc/Makefile (CFLAGS-mcheck-init.c): Likewise. (CFLAGS-obstack.c): Likewise. * math/Makefile (CFLAGS-test-tgmath3.c): Likewise. (CFLAGS-test-double-vlen4-wrappers.c): Likewise. (CFLAGS-test-double-vlen8-wrappers.c): Likewise. (CFLAGS-test-float-vlen8-wrappers.c): Likewise. (CFLAGS-test-float-vlen16-wrappers.c): Likewise. (CFLAGS-test-tgmath.c): Likewise. (CFLAGS-test-tgmath2.c): Likewise. (CFLAGS-test-tgmath-ret.c): Likewise. (CFLAGS-test-powl.c): Likewise. (CFLAGS-test-snan.c): Likewise. (CFLAGS-test-signgam-finite.c): Likewise. (CFLAGS-test-signgam-finite-c99.c): Likewise. (CFLAGS-test-signgam-finite-c11.c): Likewise. (CFLAGS-test-signgam-uchar.c): Likewise. (CFLAGS-test-signgam-uchar-init.c): Likewise. (CFLAGS-test-signgam-uchar-static.c): Likewise. (CFLAGS-test-signgam-uchar-init-static.c): Likewise. (CFLAGS-test-signgam-uint.c): Likewise. (CFLAGS-test-signgam-uint-init.c): Likewise. (CFLAGS-test-signgam-uint-static.c): Likewise. (CFLAGS-test-signgam-uint-init-static.c): Likewise. (CFLAGS-test-signgam-ullong.c): Likewise. (CFLAGS-test-signgam-ullong-init.c): Likewise. (CFLAGS-test-signgam-ullong-static.c): Likewise. (CFLAGS-test-signgam-ullong-init-static.c): Likewise. (CFLAGS-test-math-cxx11.cc): Likewise. (CFLAGS-test-math-isinff.cc): Likewise. (CFLAGS-test-math-iszero.cc): Likewise. (CFLAGS-test-math-issignaling.cc): Likewise. (CFLAGS-test-math-iscanonical.cc): Likewise. (CFLAGS-test-iszero-excess-precision.c): Likewise. (CFLAGS-test-iseqsig-excess-precision.c): Likewise. (CFLAGS-test-flt-eval-method.c): Likewise. (CFLAGS-test-fe-snans-always-signal.c): Likewise. (CFLAGS-test-finite-macros.c): Likewise. * misc/Makefile (CFLAGS-select.c): Likewise. (CFLAGS-tsearch.c): Likewise. (CFLAGS-lsearch.c): Likewise. (CFLAGS-pselect.c): Likewise. (CFLAGS-readv.c): Likewise. (CFLAGS-writev.c): Likewise. (CFLAGS-preadv.c): Likewise. (CFLAGS-preadv64.c): Likewise. (CFLAGS-pwritev.c): Likewise. (CFLAGS-pwritev64.c): Likewise. (CFLAGS-preadv2.c): Likewise. (CFLAGS-preadv64v2.c): Likewise. (CFLAGS-pwritev2.c): Likewise. (CFLAGS-pwritev64v2.c): Likewise. (CFLAGS-usleep.c): Likewise. (CFLAGS-syslog.c): Likewise. (CFLAGS-error.c): Likewise. (CFLAGS-getpass.c): Likewise. (CFLAGS-mkstemp.c): Likewise. (CFLAGS-mkstemp64.c): Likewise. (CFLAGS-getsysstats.c): Likewise. (CFLAGS-getusershell.c): Likewise. (CFLAGS-err.c): Likewise. (CFLAGS-tst-tsearch.c): Likewise. (CFLAGS-msync.c): Likewise. (CFLAGS-fdatasync.c): Likewise. (CFLAGS-fsync.c): Likewise. * nptl/Makefile (CFLAGS-nptl-init.c): Likewise. (CFLAGS-unwind.c): Likewise. (CFLAGS-unwind-forcedunwind.c): Likewise. (CFLAGS-pthread_cancel.c): Likewise. (CFLAGS-pthread_setcancelstate.c): Likewise. (CFLAGS-pthread_setcanceltype.c): Likewise. (CFLAGS-cancellation.c): Likewise. (CFLAGS-libc-cancellation.c): Likewise. (CFLAGS-pthread_exit.c): Likewise. (CFLAGS-forward.c): Likewise. (CFLAGS-pthread_testcancel.c): Likewise. (CFLAGS-pthread_join.c): Likewise. (CFLAGS-pthread_timedjoin.c): Likewise. (CFLAGS-pthread_once.c): Likewise. (CFLAGS-pthread_cond_wait.c): Likewise. (CFLAGS-sem_wait.c): Likewise. (CFLAGS-sem_timedwait.c): Likewise. (CFLAGS-fcntl.c): Likewise. (CFLAGS-lockf.c): Likewise. (CFLAGS-pread.c): Likewise. (CFLAGS-pread64.c): Likewise. (CFLAGS-pwrite.c): Likewise. (CFLAGS-pwrite64.c): Likewise. (CFLAGS-wait.c): Likewise. (CFLAGS-waitpid.c): Likewise. (CFLAGS-sigwait.c): Likewise. (CFLAGS-msgrcv.c): Likewise. (CFLAGS-msgsnd.c): Likewise. (CFLAGS-tcdrain.c): Likewise. (CFLAGS-open.c): Likewise. (CFLAGS-open64.c): Likewise. (CFLAGS-pause.c): Likewise. (CFLAGS-recv.c): Likewise. (CFLAGS-send.c): Likewise. (CFLAGS-accept.c): Likewise. (CFLAGS-sendto.c): Likewise. (CFLAGS-connect.c): Likewise. (CFLAGS-recvfrom.c): Likewise. (CFLAGS-recvmsg.c): Likewise. (CFLAGS-sendmsg.c): Likewise. (CFLAGS-close.c): Likewise. (CFLAGS-read.c): Likewise. (CFLAGS-write.c): Likewise. (CFLAGS-nanosleep.c): Likewise. (CFLAGS-sigsuspend.c): Likewise. (CFLAGS-msync.c): Likewise. (CFLAGS-fdatasync.c): Likewise. (CFLAGS-fsync.c): Likewise. (CFLAGS-pt-system.c): Likewise. (CFLAGS-tst-cleanup2.c): Likewise. (CFLAGS-tst-cleanupx2.c): Likewise. (CFLAGS-flockfile.c): Likewise. (CFLAGS-ftrylockfile.c): Likewise. (CFLAGS-funlockfile.c): Likewise. (CFLAGS-tst-initializers1.c): Likewise. (CFLAGS-tst-initializers1-c89.c): Likewise. (CFLAGS-tst-initializers1-c99.c): Likewise. (CFLAGS-tst-initializers1-c11.c): Likewise. (CFLAGS-tst-initializers1-gnu89.c): Likewise. (CFLAGS-tst-initializers1-gnu99.c): Likewise. (CFLAGS-tst-initializers1-gnu11.c): Likewise. * nscd/Makefile (CFLAGS-nscd_getpw_r.c): Likewise. (CFLAGS-nscd_getgr_r.c): Likewise. (CFLAGS-nscd_gethst_r.c): Likewise. (CFLAGS-nscd_getai.c): Likewise. (CFLAGS-nscd_initgroups.c): Likewise. * posix/Makefile (CFLAGS-getaddrinfo.c): Likewise. (CFLAGS-pause.c): Likewise. (CFLAGS-pread.c): Likewise. (CFLAGS-pread64.c): Likewise. (CFLAGS-pwrite.c): Likewise. (CFLAGS-pwrite64.c): Likewise. (CFLAGS-sleep.c): Likewise. (CFLAGS-wait.c): Likewise. (CFLAGS-waitid.c): Likewise. (CFLAGS-waitpid.c): Likewise. (CFLAGS-getopt.c): Likewise. (CFLAGS-wordexp.c): Likewise. (CFLAGS-sysconf.c): Likewise. (CFLAGS-pathconf.c): Likewise. (CFLAGS-fpathconf.c): Likewise. (CFLAGS-spawn.c): Likewise. (CFLAGS-spawnp.c): Likewise. (CFLAGS-spawni.c): Likewise. (CFLAGS-glob.c): Likewise. (CFLAGS-glob64.c): Likewise. (CFLAGS-getconf.c): Likewise. (CFLAGS-nanosleep.c): Likewise. * pwd/Makefile (CFLAGS-getpwent_r.c): Likewise. (CFLAGS-getpwent.c): Likewise. (CFLAGS-getpw.c): Likewise. (CFLAGS-fgetpwent_r.c): Likewise. * resolv/Makefile (CFLAGS-res_hconf.c): Likewise. * rt/Makefile (CFLAGS-aio_suspend.c): Likewise. (CFLAGS-mq_timedreceive.c): Likewise. (CFLAGS-mq_timedsend.c): Likewise. (CFLAGS-clock_nanosleep.c): Likewise. (CFLAGS-librt-cancellation.c): Likewise. * shadow/Makefile (CFLAGS-getspent_r.c): Likewise. (CFLAGS-getspent.c): Likewise. (CFLAGS-fgetspent.c): Likewise. (CFLAGS-fgetspent_r.c): Likewise. (CFLAGS-putspent.c): Likewise. (CFLAGS-getspnam.c): Likewise. (CFLAGS-getspnam_r.c): Likewise. * signal/Makefile (CFLAGS-sigpause.c): Likewise. (CFLAGS-sigsuspend.c): Likewise. (CFLAGS-sigtimedwait.c): Likewise. (CFLAGS-sigwait.c): Likewise. (CFLAGS-sigwaitinfo.c): Likewise. (CFLAGS-sigreturn.c): Likewise. * stdio-common/Makefile (CFLAGS-vfprintf.c): Likewise. (CFLAGS-vfwprintf.c): Likewise. (CFLAGS-tmpfile.c): Likewise. (CFLAGS-tmpfile64.c): Likewise. (CFLAGS-tempname.c): Likewise. (CFLAGS-psignal.c): Likewise. (CFLAGS-vprintf.c): Likewise. (CFLAGS-cuserid.c): Likewise. (CFLAGS-errlist.c): Likewise. (CFLAGS-siglist.c): Likewise. (CFLAGS-scanf15.c): Likewise. (CFLAGS-scanf17.c): Likewise. * stdlib/Makefile (CFLAGS-bsearch.c): Likewise. (CFLAGS-msort.c): Likewise. (CFLAGS-qsort.c): Likewise. (CFLAGS-system.c): Likewise. (CFLAGS-fmtmsg.c): Likewise. (CFLAGS-strfmon.c): Likewise. (CFLAGS-strfmon_l.c): Likewise. (CFLAGS-strfromd.c): Likewise. (CFLAGS-strfromf.c): Likewise. (CFLAGS-strfroml.c): Likewise. (CFLAGS-tst-bsearch.c): Likewise. (CFLAGS-tst-qsort.c): Likewise. (CFLAGS-tst-makecontext2.c): Likewise. * sunrpc/Makefile (CFLAGS-xbootparam_prot.c): Likewise. (CFLAGS-xnlm_prot.c): Likewise. (CFLAGS-xrstat.c): Likewise. (CFLAGS-xyppasswd.c): Likewise. (CFLAGS-xklm_prot.c): Likewise. (CFLAGS-xrex.c): Likewise. (CFLAGS-xsm_inter.c): Likewise. (CFLAGS-xmount.c): Likewise. (CFLAGS-xrusers.c): Likewise. (CFLAGS-xspray.c): Likewise. (CFLAGS-xnfs_prot.c): Likewise. (CFLAGS-xrquota.c): Likewise. (CFLAGS-xkey_prot.c): Likewise. (CFLAGS-auth_unix.c): Likewise. (CFLAGS-key_call.c): Likewise. (CFLAGS-pmap_rmt.c): Likewise. (CFLAGS-clnt_perr.c): Likewise. (CFLAGS-openchild.c): Likewise. * sysvipc/Makefile (CFLAGS-msgrcv.c): Likewise. (CFLAGS-msgsnd.c): Likewise. * termios/Makefile (CFLAGS-tcdrain.c): Likewise. * time/Makefile (CFLAGS-tzfile.c): Likewise. (CFLAGS-tzset.c): Likewise. (CFLAGS-getdate.c): Likewise. (CFLAGS-test_time.c): Likewise. (CPPFLAGS-tst-tzname.c): Likewise. * timezone/Makefile (CFLAGS-zdump.c): Likewise. (CFLAGS-zic.c): Likewise. * wcsmbs/Makefile (CFLAGS-wcwidth.c): Likewise. (CFLAGS-wcswidth.c): Likewise. (CFLAGS-wcstol.c): Likewise. (CFLAGS-wcstoul.c): Likewise. (CFLAGS-wcstoll.c): Likewise. (CFLAGS-wcstoull.c): Likewise. (CFLAGS-wcstod.c): Likewise. (CFLAGS-wcstold.c): Likewise. (CFLAGS-wcstof128.c): Likewise. (CFLAGS-wcstof.c): Likewise. (CFLAGS-wcstol_l.c): Likewise. (CFLAGS-wcstoul_l.c): Likewise. (CFLAGS-wcstoll_l.c): Likewise. (CFLAGS-wcstoull_l.c): Likewise. (CFLAGS-wcstod_l.c): Likewise. (CFLAGS-wcstold_l.c): Likewise. (CFLAGS-wcstof128_l.c): Likewise. (CFLAGS-wcstof_l.c): Likewise. (CPPFLAGS-tst-wchar-h.c): Likewise. (CPPFLAGS-wcstold_l.c): Likewise. Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
* New generic cosfPaul Clarke2017-12-112-40/+218
| | | | | | | | The same logic used in s_cosf.S version for x86 and powerpc is used to create a generic s_cosf.c, so there is no performance improvement in x86_64 and powerpc64. * sysdeps/ieee754/flt-32/s_cosf.c: New implementation.
* powerpc: POWER8 memcpy optimization for cached memoryAdhemerval Zanella2017-12-1113-13/+344
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On POWER8, unaligned memory accesses to cached memory has little impact on performance as opposed to its ancestors. It is disabled by default and will only be available when the tunable glibc.tune.cached_memopt is set to 1. __memcpy_power8_cached __memcpy_power7 ============================================================ max-size=4096: 33325.70 ( 12.65%) 38153.00 max-size=8192: 32878.20 ( 11.17%) 37012.30 max-size=16384: 33782.20 ( 11.61%) 38219.20 max-size=32768: 33296.20 ( 11.30%) 37538.30 max-size=65536: 33765.60 ( 10.53%) 37738.40 * manual/tunables.texi (Hardware Capability Tunables): Document glibc.tune.cached_memopt. * sysdeps/powerpc/cpu-features.c: New file. * sysdeps/powerpc/cpu-features.h: New file. * sysdeps/powerpc/dl-procinfo.c [!IS_IN(ldconfig)]: Add _dl_powerpc_cpu_features. * sysdeps/powerpc/dl-tunables.list: New file. * sysdeps/powerpc/ldsodefs.h: Include cpu-features.h. * sysdeps/powerpc/powerpc32/power4/multiarch/init-arch.h (INIT_ARCH): Initialize use_aligned_memopt. * sysdeps/powerpc/powerpc64/dl-machine.h [defined(SHARED && IS_IN(rtld))]: Restrict dl_platform_init availability and initialize CPU features used by tunables. * sysdeps/powerpc/powerpc64/multiarch/Makefile (sysdep_routines): Add memcpy-power8-cached. * sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c: Add __memcpy_power8_cached. * sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-power8-cached.S: New file. Reviewed-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
* string: Replace = with += in CFLAGS-xxx.cH.J. Lu2017-12-112-9/+21
| | | | | | | | | | | | | | | Replace = with += in CFLAGS-xxx.c to allow Makefile under sysdeps to define CFLAGS-xx.c. * string/Makefile (CFLAGS-inl-tester.c): Replace = with +=. (CFLAGS-noinl-tester.c): Likewise. (CFLAGS-tst-strlen.c): Likewise. (CFLAGS-stratcliff.c): Likewise. (CFLAGS-test-ffs.c): Likewise. (CFLAGS-tst-inlcall.c): Likewise. (CFLAGS-tst-xbzero-opt.c): Likewise. (CFLAGS-memcpy.c): Likewise. (CFLAGS-wordcopy.c): Likewise.
* S390: Add CFI rule in _dl_runtime_resolve[_vx] for unwinding.Stefan Liebler2017-12-113-25/+30
| | | | | | | | | | | | | | | | | | | In _dl_runtime_resolve[_vx], unwinding fails after the new stack frame is created as there is no CFI rule for r15. This is also observeable in GDB: Backtrace stopped: previous frame inner to this frame (corrupt stack?) Therefore this patch is now storing r15 on stack and is using cfi_offset rule. The stmg/lmg instruction is used to store/load r14 and r15 with one instruction. On 64bit, the offsets of the fprs have moved to store r15 directly after r14. On 31bit, the r14/r15 is now stored between the other gprs and fprs as the space wasn't used. ChangeLog: * sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_resolve): Store r15 on stack and add cfi rule. * sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_resolve): Likewise.
* elf/rtld.c (init_tls): Add missing new line to the _dl_fatal_printf call [BZ ↵Aurelien Jarno2017-12-102-1/+7
| | | | | | | | #22577] Changelog: * elf/rtld.c (init_tls): Add missing new line to the _dl_fatal_printf call.
* x86-64: Add sinf with FMAH.J. Lu2017-12-076-3/+47
| | | | | | | | | | | | | | | | On Skylake, bench-sinf reports performance improvement: Before After Improvement max 153.996 100.094 54% min 8.546 6.852 25% mean 18.1223 11.802 54% * sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_sinf-sse2 and s_sinf-fma. (CFLAGS-s_sinf-fma.c): New. * sysdeps/x86_64/fpu/multiarch/s_sinf-fma.c: New file. * sysdeps/x86_64/fpu/multiarch/s_sinf-sse2.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_sinf.c: Likewise.
* x86-64: Remove sysdeps/x86_64/fpu/s_sinf.SH.J. Lu2017-12-072-559/+4
| | | | | | | | | | | On Ivy Bridge, bench-sinf reports performance improvement: s_sinf.S s_sinf.c Improvement max 91.521 86.148 6% min 14.061 11.265 25% mean 23.3758 23.3344 0.2% * sysdeps/x86_64/fpu/s_sinf.S: Removed.
* Fix ctanh (0 + i NaN), ctanh (0 + i Inf) (bug 22568, DR#471).Joseph Myers2017-12-075-14/+30
| | | | | | | | | | | | | | | | | | | As per C11 DR#471, ctanh (0 + i NaN) and ctanh (0 + i Inf) should return 0 + i NaN (with "invalid" exception in the second case but not the first), not NaN + i NaN. This has corresponding implications for ctan since its special cases are defined by ctan (z) = -i ctanh (iz). This patch implements these cases for ctanh and ctan, updating tests accordingly. Tested for x86_64. [BZ #22568] * math/s_ctan_template.c (M_DECL_FUNC (__ctan)): Set imaginary part of result to imaginary part of argument if it is zero and the real part of the argument is not finite. * math/s_ctanh_template.c (M_DECL_FUNC (__ctanh)): Set real part of result to real part of argument if it is zero and the imaginary part of the argument is not finite.
* lt_LT locale: Base collation on copy "iso14651_t1" [BZ #22524]Mike FABIAN2017-12-074-2061/+139
| | | | | | | | | [BZ #22524] * localedata/Makefile: Add lt_LT.UTF-8 to test-input and to the list of locales to be built for testing. * localedata/lt_LT.UTF-8.in: New file for testing the collation. * localedata/locales/lt_LT (LC_COLLATE): Use “copy "iso14651_t1"” and build the collation rules upon that.
* Add _Float32 function aliases.Joseph Myers2017-12-0764-122/+3052
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch concludes filling out TS 18661-3 support for different types by adding *f32 function aliases of float functions to support _Float32. As with _Float64 and _Float32x, this is supported for all glibc configurations. As with the previous such patches there are some x86 ulps updates because of inline functions present for float but not for _Float32. The patch also has the usual bits/floatn-common.h update, symbol versions, ABI baselines updates, test enablement and documentation. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT32): Define to 1. * manual/math.texi (Mathematics): Document support for _Float32. * math/Makefile (test-types): Add float32. * math/Versions (GLIBC_2.27): Add _Float32 functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* Support defining strtof32, wcstof32 aliases.Joseph Myers2017-12-063-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for defining strtof32, wcstof32, strtof32_l and wcstof32_l functions as aliases of the corresponding float functions when _Float32 support is enabled. Tested for x86_64; also tested with build-many-glibcs.py in conjunction with other _Float32 changes. * stdlib/strtof.c: Include <bits/floatn.h> [__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (strtof32): Define and later undefine as macro. Define as weak alias if [!USE_WIDE_CHAR]. [__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (wcstof32): Define and later undefine as macro. Define as weak alias if [USE_WIDE_CHAR]. * stdlib/strtof_l.c: Include <bits/floatn.h> [__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (strtof32_l): Define and later undefine as macro. Define as weak alias if [!USE_WIDE_CHAR]. [__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (wcstof32_l): Define and later undefine as macro. Define as weak alias if [USE_WIDE_CHAR].
* Support defining strfromf32 alias.Joseph Myers2017-12-062-0/+20
| | | | | | | | | | | | This patch adds support for defining strfromf32 as an alias of strfromf when _Float32 support is enabled. Tested for x86_64; also tested with build-many-glibcs.py in conjunction with other _Float32 changes. * stdlib/strfromf.c: Include <bits/floatn.h>. [__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (strfromf32): Define and later undefine as macro and define as weak alias.
* Add header for _Float32 testing.Joseph Myers2017-12-062-0/+39
| | | | | | | | | | | This patch adds the header required for testing _Float32 function aliases, using float ulps. The corresponding makefile support will be included in the main patch that enables those aliases. In conjunction with other _Float32 changes, tested for x86_64 and with build-many-glibcs.py. * math/test-float32.h: New file.
* Support _Float32 in libm_alias_float.Joseph Myers2017-12-062-2/+15
| | | | | | | | | | | | | | This patch makes the libm_alias_float macro support creating _Float32 aliases, in preparation for enabling glibc support for that type. Tested for x86_64; also tested with build-many-glibcs.py in conjunction with other _Float32 changes. * sysdeps/generic/libm-alias-float.h: Include <bits/floatn.h>. [__HAVE_FLOAT32 && !__HAVE_DISTINCT_FLOAT32] (libm_alias_float_other_r): Create f32 alias. (libm_alias_float_r): Use semicolon before call to libm_alias_float_other_r.
* Correct some ia64 libm_alias_float_other calls.Joseph Myers2017-12-064-3/+10
| | | | | | | | | | | | | | | | | This patch corrects three ia64 libm_alias_float_other calls so they generate the intended _Float32 aliases when such aliases are enabled. Tested with build-many-glibcs.py for ia64-linux-gnu (that installed stripped shared libraries are unchanged when applied to current sources, and that this enables compilation tests to pass when used in conjunction with other _Float32 patches). * sysdeps/ia64/fpu/e_exp2f.S (__exp2f): Use exp2 not __exp2 as second argument to libm_alias_float_other. * sysdeps/ia64/fpu/e_log2f.S (__log2f): Use log2 not __log2 as second argument to libm_alias_float_other. * sysdeps/ia64/fpu/e_powf.S (__powf): Use pow not __pow as second argument to libm_alias_float_other.
* Make cacosh (0 + iNaN) return NaN + i pi/2 (bug 22561, DR#471).Joseph Myers2017-12-063-3/+19
| | | | | | | | | | | | | | | | | | As per C11 DR#471 (adjusted resolution accepted for C17), cacosh (0 + iNaN) should return NaN +/- i pi/2, not NaN + iNaN. This patch fixes the code accordingly. The test has hardcoded the result with positive sign of the imaginary part (with an associated comment), since the unspecified sign for a result other than 0 or infinity isn't currently supported by the test infrastructure. Tested for x86_64. [BZ #22561] * math/s_cacosh_template.c (M_DECL_FUNC (__cacosh)): Use pi/2 for real part of result for argument 0 + i * NaN. * math/libm-test-cacosh.inc (cacosh_test_data): Update expected results for tests of 0 + i * NaN.
* Update Alpha libm-test-ulpsAdhemerval Zanella2017-12-062-2/+12
| | | | | | * sysdeps/alpha/fpu/libm-test-ulps: Update. Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Sparc ulp update.David S. Miller2017-12-062-0/+11
| | | | | * sysdeps/sparc/fpu/libm-test-ulps: Update exp_{downward,towardzero,upward} ulps.
* Don't make local variables static in ldbl-96 j1l.Joseph Myers2017-12-062-1/+4
| | | | | | | | | | | | | | | | | | | | | | | The ldbl-96 implementation of j1l has some function-local variables that are declared static for no apparent reason (this dates back to the first addition of that file). Any vaguely recent compiler, probably including any that are supported for building glibc, optimizes away the "static" here, as the values of the variables on entry to the function are dead. So there is not actually a user-visible bug here at present (but with any compilers that didn't optimize away the static at all, possibly building with less or no optimization, so that the function stored intermediate values to and then loaded them from the variables, there would have been a thread-safety issue). But the "static" clearly doesn't belong there and might potentially make things unsafe were compilation without optimization to be supported in future, so this patch removes it. Tested for x86_64. * sysdeps/ieee754/ldbl-96/e_j1l.c (qone): Don't make local variables static.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-07-12 11:41:21 +0000