about summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
* aarch64: Add BTI support to assembly filesSudakshina Das2020-07-0810-1/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | To enable building glibc with branch protection, assembly code needs BTI landing pads and ELF object file markings in the form of a GNU property note. The landing pads are unconditionally added to all functions that may be indirectly called. When the code segment is not mapped with PROT_BTI these instructions are nops. They are kept in the code when BTI is not supported so that the layout of performance critical code is unchanged across configurations. The GNU property notes are only added when there is support for BTI in the toolchain, because old binutils does not handle the notes right. (Does not know how to merge them nor to put them in PT_GNU_PROPERTY segment instead of PT_NOTE, and some versions of binutils emit warnings about the unknown GNU property. In such cases the produced libc binaries would not have valid ELF marking so BTI would not be enabled.) Note: functions using ENTRY or ENTRY_ALIGN now start with an additional BTI c, so alignment of the following code changes, but ENTRY_ALIGN_AND_PAD was fixed so there is no change to the existing code layout. Some string functions may need to be tuned for optimal performance after this commit. Co-authored-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* aarch64: Rename place holder .S files to .cSzabolcs Nagy2020-07-083-0/+0
| | | | | | | | The compiler can add required elf markings based on CFLAGS but the assembler cannot, so using C code for empty files creates less of a maintenance problem. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* aarch64: configure test for BTI supportSzabolcs Nagy2020-07-083-0/+64
| | | | | | | | | | | | | Check BTI support in the compiler and linker. The check also requires READELF that understands the BTI GNU property note. It is expected to succeed with gcc >=gcc-9 configured with --enable-standard-branch-protection and binutils >=binutils-2.33. Note: passing -mbranch-protection=bti in CFLAGS when building glibc may not be enough to get a glibc that supports BTI because crtbegin* and crtend* provided by the compiler needs to be BTI compatible too. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Rewrite abi-note.S in C.Szabolcs Nagy2020-07-082-18/+15
| | | | | | | | Using C code allows the compiler to add target specific object file markings based on CFLAGS. The arm specific abi-note.S is removed and similar object file fix up will be avoided on AArch64 with standard branch protection.
* rtld: Clean up PT_NOTE and add PT_GNU_PROPERTY handlingSzabolcs Nagy2020-07-085-64/+118
| | | | | | | | | | | | | | | | | | | | | | Add generic code to handle PT_GNU_PROPERTY notes. Invalid content is ignored, _dl_process_pt_gnu_property is always called after PT_LOAD segments are mapped and it has no failure modes. Currently only one NT_GNU_PROPERTY_TYPE_0 note is handled, which contains target specific properties: the _dl_process_gnu_property hook is called for each property. The old _dl_process_pt_note and _rtld_process_pt_note differ in how the program header is read. The old _dl_process_pt_note is called before PT_LOAD segments are mapped and _rtld_process_pt_note is called after PT_LOAD segments are mapped. The old _rtld_process_pt_note is removed and _dl_process_pt_note is always called after PT_LOAD segments are mapped and now it has no failure modes. The program headers are scanned backwards so that PT_NOTE can be skipped if PT_GNU_PROPERTY exists. Co-Authored-By: H.J. Lu <hjl.tools@gmail.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* string: Move tst-strsignal tst-strerror to tests-containerAdhemerval Zanella2020-07-081-1/+3
| | | | | | | Both tests require libc.mo translation files which might not be installed on the system. Checked on x86_64-linux-gnu.
* string: Fix prototype mismatch in sigabbrev_np, __sigdescr_npFlorian Weimer2020-07-082-2/+2
| | | | GCC 6 does not ignore the const specifier on the return type.
* arm: CVE-2020-6096: Fix multiarch memcpy for negative length [BZ #25620]Alexander Anisimov2020-07-081-11/+11
| | | | | | Unsigned branch instructions could be used for r2 to fix the wrong behavior when a negative length is passed to memcpy. This commit fixes the armv7 version.
* arm: CVE-2020-6096: fix memcpy and memmove for negative length [BZ #25620]Evgeny Eremin2020-07-082-28/+20
| | | | | | Unsigned branch instructions could be used for r2 to fix the wrong behavior when a negative length is passed to memcpy and memmove. This commit fixes the generic arm implementation of memcpy amd memmove.
* sunrpc: Remove hidden aliases for global data symbols (bug 26210)Florian Weimer2020-07-083-9/+8
| | | | | | | | | | | | | It is generally not possible to add hidden aliases for global data symbols: If the main executable contains a copy relocation against the symbol, the hidden aliases keep pointing to the glibc-internal copy of the symbol, instead of the symbol actually used by the application. Fixes commit 89aacb513eb77549a29df2638913a0f8178cf3f5 ("sunrpc: Remove stray exports without --enable-obsolete-rpc [BZ #23166]"). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* hurd: Fix strerror not setting errnoSamuel Thibault2020-07-071-5/+11
| | | | | * sysdeps/mach/strerror_l.c: Include <errno.h>. (__strerror_l): Save errno on entry and restore it on exit.
* tst-strsignal: fix checking for RT signals supportSamuel Thibault2020-07-071-4/+8
| | | | | | * string/tst-strsignal.c (do_test): Actually check that RT signals are available by comparing SIGRTMAX to SIGRTMIN. Check that SIGRTMAX is 64 before testing for a message reporting 65 for SIGRTMAX+1.
* hurd: Evaluate fd before entering the critical sectionSamuel Thibault2020-07-071-1/+2
| | | | | * sysdeps/hurd/include/hurd/fd.h (HURD_FD_PORT_USE_CANCEL): Evaluate fd before calling _hurd_critical_section_lock.
* Rewrite iconv option parsing [BZ #19519]Arjun Shankar2020-07-0711-143/+988
| | | | | | | | | | | | | | | | This commit replaces string manipulation during `iconv_open' and iconv_prog option parsing with a structured, flag based conversion specification. In doing so, it alters the internal `__gconv_open' interface and accordingly adjusts its uses. This change fixes several hangs in the iconv program and therefore includes a new test to exercise iconv_prog options that originally led to these hangs. It also includes a new regression test for option handling in the iconv function. Reviewed-by: Florian Weimer <fweimer@redhat.com> Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* nss: Remove cryptographic key support from nss_files, nss_nis, nss_nisplusFlorian Weimer2020-07-076-760/+9
| | | | | | | | The interface has hard-coded buffer sizes and is therefore tied to DES. It also does not match current practice where different services on the same host use different key material. This change simplifies removal of the sunrpc code.
* sunrpc: Do not export getrpcport by defaultFlorian Weimer2020-07-071-0/+5
| | | | | | This function looks like an NSS function, but is actually a wrapper around pmap_getport, so it should only be exported with --enable-obsolete-rpc.
* sunrpc: Do not export key handling hooks by defaultFlorian Weimer2020-07-071-3/+14
| | | | | | __key_encryptsession_pk_LOCAL, __key_decryptsession_pk_LOCAL, __key_gendes_LOCAL had a default version symbol even without --enable-obsolete-rpc.
* sunrpc: Turn clnt_sperrno into a libc_hidden_nolink_sunrpc symbolFlorian Weimer2020-07-071-0/+4
| | | | | Before this change, the function had a default symbol version even without --enable-obsolete-rpc.
* string: Add strerrorname_np and strerrordesc_npAdhemerval Zanella2020-07-0742-1/+259
| | | | | | | | | | | | | | | | | The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL) while strerrordesc_np returns string describing error number (e.g "Invalid argument" for EINVAL). Different than strerror, strerrordesc_np does not attempt to translate the return description, both functions return NULL for an invalid error number. They should be used instead of sys_errlist and sys_nerr, both are thread and async-signal safe. These functions are GNU extensions. Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Add sigabbrev_np and sigdescr_npAdhemerval Zanella2020-07-0743-10/+236
| | | | | | | | | | | | | | | | | | The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for SIGHUP) while sigdescr_np returns the string describing the error number (e.g "Hangup" for SIGHUP). Different than strsignal, sigdescr_np does not attempt to translate the return description and both functions return NULL for an invalid signal number. They should be used instead of sys_siglist or sys_sigabbrev and they are both thread and async-signal safe. They are added as GNU extensions on string.h header (same as strsignal). Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Add strerror_l on test-strerror-errnoAdhemerval Zanella2020-07-071-0/+5
| | | | | | | | Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Add strerror, strerror_r, and strerror_l testAdhemerval Zanella2020-07-076-1/+145
| | | | | | | | Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Add strsignal testAdhemerval Zanella2020-07-072-2/+61
| | | | | | | | Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Simplify strerror_rAdhemerval Zanella2020-07-072-101/+7
| | | | | | | | | | | | Use snprintf instead of mempcpy plus itoa_word and remove unused definitions. There is no potential for infinite recursion because snprintf only use strerror_r for the %m specifier. Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Use tls-internal on strerror_lAdhemerval Zanella2020-07-077-40/+20
| | | | | | | | | | The buffer allocation uses the same strategy of strsignal. Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Implement strerror in terms of strerror_lAdhemerval Zanella2020-07-075-26/+24
| | | | | | | | | | | | | | If the thread is terminated then __libc_thread_freeres will free the storage via __glibc_tls_internal_free. It is only within the calling thread that this matters. It makes strerror MT-safe. Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* string: Remove old TLS usage on strsignalAdhemerval Zanella2020-07-0710-91/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The per-thread state is refactored two use two strategies: 1. The default one uses a TLS structure, which will be placed in the static TLS space (using __thread keyword). 2. Linux allocates via struct pthread and access it through THREAD_* macros. The default strategy has the disadvantage of increasing libc.so static TLS consumption and thus decreasing the possible surplus used in some scenarios (which might be mitigated by BZ#25051 fix). It is used only on Hurd, where accessing the thread storage in the in single thread case is not straightforward (afaiu, Hurd developers could correct me here). The fallback static allocation used for allocation failure is also removed: defining its size is problematic without synchronizing with translated messages (to avoid partial translation) and the resulting usage is not thread-safe. Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu, and s390x-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* linux: Fix __NSIG_WORDS and add __NSIG_BYTESAdhemerval Zanella2020-07-0715-28/+43
| | | | | | | | | | | | | | The __NSIG_WORDS value is based on minimum number of words to hold the maximum number of signals supported by the architecture. This patch also adds __NSIG_BYTES, which is the number of bytes required to represent the supported number of signals. It is used in syscalls which takes a sigset_t. Checked on x86_64-linux-gnu and i686-linux-gnu. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* signal: Move sys_errlist to a compat symbolAdhemerval Zanella2020-07-0730-1898/+1115
| | | | | | | | | | | | | | | | | | | | The symbol is deprecated by strerror since its usage imposes some issues such as copy relocations. Its internal name is also changed to _sys_errlist_internal to avoid static linking usage. The compat code is also refactored by removing the over enginered errlist-compat.c generation from manual entried and extra comment token in linker script file. It disantangle the code generation from manual and simplify both Linux and Hurd compat code. The definitions from errlist.c are moved to errlist.h and a new test is added to avoid a new errno entry without an associated one in manual. Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi on all affected platforms. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* signal: Move sys_siglist to a compat symbolAdhemerval Zanella2020-07-0714-116/+93
| | | | | | | | | | | | | | | | | | | The symbol was deprecated by strsignal and its usage imposes issues such as copy relocations. Its internal name is changed to __sys_siglist and __sys_sigabbrev to avoid static linking usage. The compat code is also refactored, since both Linux and Hurd usage the same strategy: export the same array with different object sizes. The libSegfault change avoids calling strsignal on the SIGFAULT signal handler (the current usage is already sketchy, adding a call that potentially issue locale internal function is even sketchier). Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi on all affected platforms. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* signal: Add signum-{generic,arch}.hAdhemerval Zanella2020-07-0718-374/+461
| | | | | | | | | | | | | | | | | | | | It refactor how signals are defined by each architecture. Instead of include a generic header (bits/signum-generic.h) and undef non-default values in an arch specific header (bits/signum.h) the new scheme uses a common definition (bits/signum-generic.h) and each architectures add its specific definitions on a new header (bits/signum-arch.h). For Linux it requires copy some system default definitions to alpha, hppa, and sparc. They are historical values and newer ports uses the generic Linux signum-arch.h. For Hurd the BSD signum is removed and moved to a new header (it is used currently only on Hurd). Checked on a build against all affected ABIs. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* Remove most vfprintf width/precision-dependent allocations (bug 14231, bug ↵Joseph Myers2020-07-074-121/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 26211). The vfprintf implementation (used for all printf-family functions) contains complicated logic to allocate internal buffers of a size depending on the width and precision used for a format, using either malloc or alloca depending on that size, and with consequent checks for size overflow and allocation failure. As noted in bug 26211, the version of that logic used when '$' plus argument number formats are in use is missing the overflow checks, which can result in segfaults (quite possibly exploitable, I didn't try to work that out) when the width or precision is in the range 0x7fffffe0 through 0x7fffffff (maybe smaller values as well in the wprintf case on 32-bit systems, when the multiplication by sizeof (CHAR_T) can overflow). All that complicated logic in fact appears to be useless. As far as I can tell, there has been no need (outside the floating-point printf code, which does its own allocations) for allocations depending on width or precision since commit 3e95f6602b226e0de06aaff686dc47b282d7cc16 ("Remove limitation on size of precision for integers", Sun Sep 12 21:23:32 1999 +0000). Thus, this patch removes that logic completely, thereby fixing both problems with excessive allocations for large width and precision for non-floating-point formats, and the problem with missing overflow checks with such allocations. Note that this does have the consequence that width and precision up to INT_MAX are now allowed where previously INT_MAX / sizeof (CHAR_T) - EXTSIZ or more would have been rejected, so could potentially expose any other overflows where the value would previously have been rejected by those removed checks. I believe this completely fixes bugs 14231 and 26211. Excessive allocations are still possible in the floating-point case (bug 21127), as are other integer or buffer overflows (see bug 26201). This does not address the cases where a precision larger than INT_MAX (embedded in the format string) would be meaningful without printf's return value overflowing (when it's used with a string format, or %g without the '#' flag, so the actual output will be much smaller), as mentioned in bug 17829 comment 8; using size_t internally for precision to handle that case would be complicated by struct printf_info being a public ABI. Nor does it address the matter of an INT_MIN width being negated (bug 17829 comment 7; the same logic appears a second time in the file as well, in the form of multiplying by -1). There may be other sources of memory allocations with malloc in printf functions as well (bug 24988, bug 16060). From inspection, I think there are also integer overflows in two copies of "if ((width -= len) < 0)" logic (where width is int, len is size_t and a very long string could result in spurious padding being output on a 32-bit system before printf overflows the count of output characters). Tested for x86-64 and x86.
* elf: Do not signal LA_ACT_CONSISTENT for an empty namespace [BZ #26076]Florian Weimer2020-07-071-2/+8
| | | | | | | | | The auditing interface identifies namespaces by their first loaded module. Once the namespace is empty, it is no longer possible to signal LA_ACT_CONSISTENT for it because the first loaded module is already gone at that point. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Fix stringop-overflow errors from gcc 10 in iconv.Stefan Liebler2020-07-072-9/+13
| | | | | | | On s390x, I've recognize various -Werror=stringop-overflow messages in iconv/loop.c and iconv/skeleton.c if build with gcc10 -O3. With this commit gcc knows the size and do not raise those errors anymore.
* x86: Add thresholds for "rep movsb/stosb" to tunablesH.J. Lu2020-07-067-26/+86
| | | | | | | | | | Add x86_rep_movsb_threshold and x86_rep_stosb_threshold to tunables to update thresholds for "rep movsb" and "rep stosb" at run-time. Note that the user specified threshold for "rep movsb" smaller than the minimum threshold will be ignored. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Use C2x return value from getpayload of non-NaN (bug 26073).Joseph Myers2020-07-068-14/+33
| | | | | | | | | | | | | | | In TS 18661-1, getpayload had an unspecified return value for a non-NaN argument, while C2x requires the return value -1 in that case. This patch implements the return value of -1. I don't think this is worth having a new symbol version that's an alias of the old one, although occasionally we do that in such cases where the new function semantics are a refinement of the old ones (to avoid programs relying on the new semantics running on older glibc versions but not behaving as intended). Tested for x86_64 and x86; also ran math/ tests for aarch64 and powerpc.
* x86: Detect Extended Feature Disable (XFD)H.J. Lu2020-07-062-0/+4
| | | | | | | An extension called extended feature disable (XFD) is an extension added for Intel AMX to the XSAVE feature set that allows an operating system to enable a feature while preventing specific user threads from using the feature.
* x86: Correct bit_cpu_CLFSH [BZ #26208]H.J. Lu2020-07-061-1/+1
| | | | bit_cpu_CLFSH should be (1u << 19), not (1u << 20).
* manual: Document __libc_single_threadedFlorian Weimer2020-07-061-0/+113
| | | | | Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Reviewed-by: DJ Delorie <dj@redhat.com>
* Add the __libc_single_threaded variableFlorian Weimer2020-07-0651-8/+663
| | | | | | | | | | | | | | The variable is placed in libc.so, and it can be true only in an outer libc, not libcs loaded via dlmopen or static dlopen. Since thread creation from inner namespaces does not work, pthread_create can update __libc_single_threaded directly. Using __libc_early_init and its initial flag, implementation of this variable is very straightforward. A future version may reset the flag during fork (but not in an inner namespace), or after joining all threads except one. Reviewed-by: DJ Delorie <dj@redhat.com>
* Linux: rseq registration testsMathieu Desnoyers2020-07-064-1/+388
| | | | | | | | | | | | | | | These tests validate that rseq is registered from various execution contexts (main thread, destructor, other threads, other threads created from destructor, forked process (without exec), pthread_atfork handlers, pthread setspecific destructors, signal handlers, atexit handlers). tst-rseq.c only links against libc.so, testing registration of rseq in a non-multithreaded environment. tst-rseq-nptl.c also links against libpthread.so, testing registration of rseq in a multithreaded environment. See the Linux kernel selftests for extensive rseq stress-tests.
* Linux: Use rseq in sched_getcpu if availableMathieu Desnoyers2020-07-061-2/+20
| | | | | | | | | | | | | When available, use the cpu_id field from __rseq_abi on Linux to implement sched_getcpu(). Fall-back on the vgetcpu vDSO if unavailable. Benchmarks: x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading glibc sched_getcpu(): 13.7 ns (baseline) glibc sched_getcpu() using rseq: 2.5 ns (speedup: 5.5x) inline load cpuid from __rseq_abi TLS: 0.8 ns (speedup: 17.1x)
* Linux: Perform rseq registration at C startup and thread creationMathieu Desnoyers2020-07-0648-3/+781
| | | | | | | | | | | | | | | | | | | Register rseq TLS for each thread (including main), and unregister for each thread (excluding main). "rseq" stands for Restartable Sequences. See the rseq(2) man page proposed here: https://lkml.org/lkml/2018/9/19/647 Those are based on glibc master branch commit 3ee1e0ec5c. The rseq system call was merged into Linux 4.18. The TLS_STATIC_SURPLUS define is increased to leave additional room for dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working. The increase (76 bytes) is larger than 32 bytes because it has not been increased in quite a while. The cost in terms of additional TLS storage is quite significant, but it will also obscure some initial-exec-related dlopen failures.
* tst-cancel4: deal with ENOSYS errorsSamuel Thibault2020-07-051-4/+38
| | | | | | | | | | The Hurd port doesn't have support for sigwaitinfo, sigtimedwait, and msgget yet, so let us ignore the test for these when they return ENOSYS. * nptl/tst-cancel4.c (tf_sigwaitinfo): Fallback on sigwait when sigwaitinfo returns ENOSYS. (tf_sigtimedwait): Likewise with sigtimedwait. (tf_msgrcv, tf_msgsnd): Fallback on tf_usleep when msgget returns ENOSYS.
* manual: Show copyright information not just in the printed manualFlorian Weimer2020-07-031-9/+11
| | | | | | | | | | | | | | | @insertcopying was not used at all in the Info and HTML versions. As a result, the notices that need to be present according to the GNU Free Documentation License were missing. This commit shows these notices above the table of contents in the HTML version, and as part of the Main Menu node in the Info version. Remove the "This file documents" line because it is redundant with the following line. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Fix typo in comment in bug 26137 fix.Joseph Myers2020-07-011-1/+1
|
* Fix strtod multiple-precision division bug (bug 26137).Joseph Myers2020-06-303-2/+3577
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug 26137 reports spurious "inexact" exceptions from strtod, on 32-bit systems only, for a decimal argument that is exactly 1 + 2^-32. In fact the same issue also appears for 1 + 2^-64 and 1 + 2^-96 as arguments to strtof128 on 32-bit systems, and 1 + 2^-64 as an argument to strtof128 on 64-bit systems. In FE_DOWNWARD or FE_TOWARDZERO mode, the return value is also incorrect. The problem is in the multiple-precision division logic used in the case of dividing by a denominator that occupies at least three GMP limbs. There was a comment "The division does not work if the upper limb of the two-limb mumerator is greater than the denominator.", but in fact there were problems for the case of equality (that is, where the high limbs are equal, offset by some multiple of the GMP limb size) as well. In such cases, the code used "quot = ~(mp_limb_t) 0;" (with subsequent correction if that is an overestimate), because udiv_qrnnd does not support the case of equality, but it's possible for the shifted numerator to be greater than or equal to the denominator, in which case that is an underestimate. To avoid that, this patch changes the ">" condition to ">=", meaning the first division is done with a zero high word. The tests added are all 1 + 2^-n for n from 1 to 113 except for those that were already present in tst-strtod-round-data. Tested for x86_64 and x86.
* Linux: Fix UTC offset setting in settimeofday for __TIMESIZE != 64Florian Weimer2020-06-301-3/+8
| | | | | | | | | | The time argument is NULL in this case, and attempt to convert it leads to a null pointer dereference. This fixes commit d2e3b697da2433c08702f95c76458c51545c3df1 ("y2038: linux: Provide __settimeofday64 implementation"). Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* random: range is not portably RAND_MAX [BZ #7003]John Marshall2020-06-301-1/+1
| | | | | | | On other platforms, RAND_MAX (which is the range of rand(3)) may differ from 2^31-1 (which is the range of random(3)). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Update kernel version to 5.7 in tst-mman-consts.py.Joseph Myers2020-06-291-1/+1
| | | | | | | | | This patch updates the kernel version in the test tst-mman-consts.py to 5.7. (There are no new constants covered by this test in 5.7 that need any other header changes; there's a new MREMAP_DONTUNMAP, but this test doesn't yet cover MREMAP_*.) Tested with build-many-glibcs.py.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-08 09:58:34 +0000