about summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
* powerpc: Rearrange little endian specific filesRajalakshmi Srinivasaraghavan2018-08-169-24/+53
| | | | | | This patch moves little endian specific POWER9 optimization files to sysdeps/powerpc/powerpc64/le and creates POWER9 ifunc functions only for little endian.
* [aarch64] Add an ASIMD variant of strlen for falkorSiddhesh Poyarekar2018-08-157-4/+273
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This variant of strlen uses vector loads and operations to reduce the size of the code and also eliminate the non-ascii fallback. This works very well for falkor because of its two vector units and efficient vector ops. In the best case it reduces latency of cases in bench-strlen by 48%, with gains throughout the benchmark. strlen-walk also sees uniform gains in the 5%-15% range. Overall the routine appears to work better than the stock one for falkor regardless of the benchmark, length of string or cache state. The same cannot be said of a53 and a72 though. a53 performance was greatly reduced and for a72 it was a bit of a mixed bag, slightly on the negative side but I reckon it might be fast in some situations. * sysdeps/aarch64/strlen.S (__strlen): Rename to STRLEN. [!STRLEN](STRLEN): Set to __strlen. * sysdeps/aarch64/multiarch/strlen.c: New file. * sysdeps/aarch64/multiarch/strlen_generic.S: Likewise. * sysdeps/aarch64/multiarch/strlen_asimd.S: Likewise. * sysdeps/aarch64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add strlen. * sysdeps/aarch64/multiarch/Makefile (sysdep_routines): Add strlen_generic and strlen_asimd. Reviewed-By: szabolcs.nagy@arm.com CC: pinskia@gmail.com
* Use generic sinf/cosf in lgammaf_rWilco Dijkstra2018-08-154-112/+14
| | | | | | | | | | | | | | The internal functions __kernel_sinf and __kernel_cosf are used only by lgammaf_r. Removing the internal functions and using the generic sinf and cosf is better overall. Benchmarking on Cortex-A72 shows the generic sinf and cosf are 1.4x and 2.3x faster in the range |x| < PI/4, and 0.66x and 1.1x for |x| < PI/2, so it should make lgammaf_r faster on average. GLIBC regression tests pass on AArch64. * sysdeps/ieee754/flt-32/e_lgammaf_r.c (sin_pif): Use __sinf/__cosf. * sysdeps/ieee754/flt-32/k_cosf.c (__kernel_cosf): Remove all code. * sysdeps/ieee754/flt-32/k_sinf.c (__kernel_sinf): Likewise.
* Fix spaces in x86_64 ULP fileWilco Dijkstra2018-08-152-3/+7
| | | | | | | | Fix a few missing spaces, it's now identical to the regenerated version. Passes GLIBC tests on x64. * sysdeps/x86_64/fpu/libm-test-ulps: Regenerate to fix spaces.
* error, warn, warnx: Use __fxprintf for wide printing [BZ #23519]Florian Weimer2018-08-147-145/+129
| | | | Also introduce the __vfxprintf function.
* Improve performance of sinf and cosfWilco Dijkstra2018-08-149-384/+207
| | | | | | | | | | | | | | | | | | | | | | | | | The second patch improves performance of sinf and cosf using the same algorithms and polynomials. The returned values are identical to sincosf for the same input. ULP definitions for AArch64 and x64 are updated. sinf/cosf througput gains on Cortex-A72: * |x| < 0x1p-12 : 1.2x * |x| < M_PI_4 : 1.8x * |x| < 2 * M_PI: 1.7x * |x| < 120.0 : 2.3x * |x| < Inf : 3.0x * NEWS: Mention sinf, cosf, sincosf. * sysdeps/aarch64/libm-test-ulps: Update ULP for sinf, cosf, sincosf. * sysdeps/x86_64/fpu/libm-test-ulps: Update ULP for sinf and cosf. * sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: Add definitions of constants rather than including generic sincosf.h. * sysdeps/x86_64/fpu/s_sincosf_data.c: Remove. * sysdeps/ieee754/flt-32/s_cosf.c (cosf): Rewrite. * sysdeps/ieee754/flt-32/s_sincosf.h (reduced_sin): Remove. (reduced_cos): Remove. (sinf_poly): New function. * sysdeps/ieee754/flt-32/s_sinf.c (sinf): Rewrite.
* nss_files: Fix file stream leak in aliases lookup [BZ #23521]Florian Weimer2018-08-144-0/+262
| | | | | In order to get a clean test case, it was necessary to fix partially fixed bug 23522 as well.
* nscd: Deallocate existing user names in file parserFlorian Weimer2018-08-142-1/+10
| | | | | This avoids a theoretical memory leak (theoretical because it depends on multiple server-user/stat-user directives in the configuration file).
* Update syscall-names.list for Linux 4.18.Joseph Myers2018-08-132-2/+9
| | | | | | | | | | | | | This patch updates sysdeps/unix/sysv/linux/syscall-names.list for Linux 4.18. The io_pgetevents and rseq syscalls are added to the kernel on various architectures, so need to be mentioned in this file. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/syscall-names.list: Update kernel version to 4.18. (io_pgetevents): New syscall. (rseq): Likewise.
* Update install.texi documentation of uses of Perl and Python.Joseph Myers2018-08-133-73/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The install.texi documentation of uses of Perl and Python is substantially out of date. The description of Perl is "to test the installation" (which I interpret as referring to test-installation.pl), but it's used for more tests than that, and to build the manual, and to regenerate one file in the source tree. The description of Python is only for pretty-printer tests, but it's used for other tests / benchmarks as well (and for other internal uses such as updating Unicode data, for which we already require Python 3, but I think install.texi only needs to describe uses from the main glibc Makefiles). This patch updates the descriptions of what those tools are used for. The Python information (and information about other tools for testing pretty printers) was awkwardly in the middle of the general description of building and testing glibc, rather than with the rest of information about tools used in glibc build and test; this patch moves the information about those tools into the main list. Tested with regeneration of INSTALL as well as "make info" and "make pdf". * manual/install.texi (Configuring and compiling): Do not list tools used for testing pretty printers here. (Tools for Compilation): List Python, PExpect and GDB here. Update descriptions of uses of Perl and Python. * INSTALL: Regenerate.
* Use Linux 4.18 in build-many-glibcs.py.Joseph Myers2018-08-132-1/+6
| | | | | * scripts/build-many-glibcs.py (Context.checkout): Default Linux version to 4.18.
* error, error_at_line: Add missing va_end callsFlorian Weimer2018-08-132-0/+7
|
* mbstowcs: Remove outdated commentFlorian Weimer2018-08-132-6/+5
| | | | | | ISO C requires that there is no effect on any global conversion state, so the change in commit 9f097308c7465443765d1e25699a4cf33eff5455 was correct in princple.
* [benchtests] Add workload test properties to schemaSiddhesh Poyarekar2018-08-112-0/+7
| | | | | | | | Add the workload test properties (max-throughput, latency, etc.) to the schema to prevent benchmark output validation from failing. * benchtests/scripts/benchout.schema.json (properties): Add new properties.
* [benchtests] Add mandatory attributes to workload testsSiddhesh Poyarekar2018-08-112-0/+7
| | | | | | | | Add the duration and iterations attributes to the workloads tests to make the json schema parser happy * benchtests/bench-skeleton.c (main): Add duration and iterations attributes.
* ChangeLog: Fix an obvious typo.Rafal Luzynski2018-08-101-1/+1
| | | | | The typo has been introduced in commit 08a5ee14c6fcd87caa4f6f5c442be2fc345211f0.
* regex: Gnulib unibyte RRI uses bytes not charsPaul Eggert2018-08-102-5/+16
| | | | | | | | | | | Adjust the non-glibc code to agree with what Gawk needs for rational range interpretation (RRI) for regular expression ranges. In unibyte locales, Gawk wants ranges to use the underlying byte rather than the character code point. This change does not affect glibc proper. * posix/regcomp.c (parse_byte) [!LIBC && RE_ENABLE_I18N]: In unibyte locales, use the byte value rather than running it through btowc.
* Move SNAN_TESTS_* out of math-tests.h.Joseph Myers2018-08-106-33/+93
| | | | | | | | | | | | | | | | | | | | | | | Continuing moving macros out of math-tests.h to smaller headers following typo-proof conventions instead of using #ifndef, this patch moves the SNAN_TESTS_* macros for individual types out to their own sysdeps header (while the type-generic SNAN_TESTS wrapper for those macros remains in math-tests.h). Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/generic/math-tests-snan.h: New file. * sysdeps/generic/math-tests.h: Include <math-tests-snan.h>. (SNAN_TESTS_float): Do not define here. (SNAN_TESTS_double): Likewise. (SNAN_TESTS_long_double): Likewise. (SNAN_TESTS_float128): Likewise. * sysdeps/i386/fpu/math-tests-snan.h: New file. * sysdeps/i386/fpu/math-tests.h: Remove file. * sysdeps/ia64/math-tests-snan.h: New file. * sysdeps/ia64/math-tests.h: Remove file. * sysdeps/x86/math-tests.h: Likewise. * sysdeps/x86_64/fpu/math-tests-snan.h: New file.
* Improve performance of sincosfWilco Dijkstra2018-08-108-133/+274
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a complete rewrite of sincosf. The new version is significantly faster, as well as simple and accurate. The worst-case ULP is 0.5607, maximum relative error is 0.5303 * 2^-23 over all 4 billion inputs. In non-nearest rounding modes the error is 1ULP. The algorithm uses 3 main cases: small inputs which don't need argument reduction, small inputs which need a simple range reduction and large inputs requiring complex range reduction. The code uses approximate integer comparisons to quickly decide between these cases. The small range reducer uses a single reduction step to handle values up to 120.0. It is fastest on targets which support inlined round instructions. The large range reducer uses integer arithmetic for simplicity. It does a 32x96 bit multiply to compute a 64-bit modulo result. This is more than accurate enough to handle the worst-case cancellation for values close to an integer multiple of PI/4. It could be further optimized, however it is already much faster than necessary. sincosf throughput gains on Cortex-A72: * |x| < 0x1p-12 : 1.6x * |x| < M_PI_4 : 1.7x * |x| < 2 * M_PI: 1.5x * |x| < 120.0 : 1.8x * |x| < Inf : 2.3x * math/Makefile: Add s_sincosf_data.c. * sysdeps/ia64/fpu/s_sincosf_data.c: New file. * sysdeps/ieee754/flt-32/s_sincosf.h (abstop12): Add new function. (sincosf_poly): Likewise. (reduce_small): Likewise. (reduce_large): Likewise. * sysdeps/ieee754/flt-32/s_sincosf.c (sincosf): Rewrite. * sysdeps/ieee754/flt-32/s_sincosf_data.c: New file with sincosf data. * sysdeps/m68k/m680x0/fpu/s_sincosf_data.c: New file. * sysdeps/x86_64/fpu/s_sincosf_data.c: New file.
* Clean up converttoint handling and document the semanticsSzabolcs Nagy2018-08-104-19/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch currently only affects aarch64. The roundtoint and converttoint internal functions are only called with small values, so 32 bit result is enough for converttoint and it is a signed int conversion so the return type is changed to int32_t. The original idea was to help the compiler keeping the result in uint64_t, then it's clear that no sign extension is needed and there is no accidental undefined or implementation defined signed int arithmetics. But it turns out gcc does a good job with inlining so changing the type has no overhead and the semantics of the conversion is less surprising this way. Since we want to allow the asuint64 (x + 0x1.8p52) style conversion, the top bits were never usable and the existing code ensures that only the bottom 32 bits of the conversion result are used. On aarch64 the neon intrinsics (which round ties to even) are changed to round and lround (which round ties away from zero) this does not affect the results in a significant way, but more portable (relies on round and lround being inlined which works with -fno-math-errno). The TOINT_SHIFT and TOINT_RINT macros were removed, only keep separate code paths for TOINT_INTRINSICS and !TOINT_INTRINSICS. * sysdeps/aarch64/fpu/math_private.h (roundtoint): Use round. (converttoint): Use lround. * sysdeps/ieee754/flt-32/math_config.h (roundtoint): Declare and document the semantics when TOINT_INTRINSICS is set. (converttoint): Likewise. (TOINT_RINT): Remove. (TOINT_SHIFT): Remove. * sysdeps/ieee754/flt-32/e_expf.c (__expf): Remove the TOINT_RINT code path.
* Linux: Rewrite __old_getdents64 [BZ #23497]Florian Weimer2018-08-104-25/+187
| | | | | | | | | Commit 298d0e3129c0b5137f4989275b13fe30d0733c4d ("Consolidate Linux getdents{64} implementation") broke the implementation because it does not take into account struct offset differences. The new implementation is close to the old one, before the consolidation, but has been cleaned up slightly.
* S390: Fix unwind in 32-bit _mcountIlya Leoshkevich2018-08-102-2/+11
| | | | | | | | | | * Fix CFI offset for %r14. * Fix unwound value of %r15 being off by 128 bytes. ChangeLog: * sysdeps/s390/s390-32/s390-mcount.S (_mcount): Fix unwind.
* S390: Implement 64-bit __fentry__Ilya Leoshkevich2018-08-105-57/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Since __fentry__ is almost the same as _mcount, reuse the code by #including it twice with different #defines around. * Remove LA usages - they are needed in 31-bit mode to clear the top bit, but in 64-bit they appear to do nothing. * Add CFI rule for the nonstandard return register. This rule applies to the current function (binutils generates a new CIE - see gas/dw2gencfi.c:select_cie_for_fde()), so it is not necessary to put __fentry__ into a new file. * Fix CFI offset for %r14. * Add CFI rule for %r0. * Fix unwound value of %r15 being off by 244 bytes. * Unwinding in __fentry__@plt does not work, no plan to fix it - it would require asking linker to generate CFI for return address in %r0. From functional perspective keeping it broken is fine, since the callee did not have a chance to do anything yet. From convenience perspective it would be possible to enhance GDB in the future to treat __fentry__@plt in a special way. * Fix whitespace. * Fix offsets in comments, which were copied from 32-bit code. * 32-bit version will not be implemented, since it's not compatible with the corresponding PLT stubs: they assume %r12 points to GOT, which is not the case for gcc-emitted __fentry__ stub, which runs before the prolog. This patch adds the runtime support in glibc for the -mfentry gcc feature introduced in [1] and [2]. [1] https://gcc.gnu.org/ml/gcc-patches/2018-07/msg00784.html [2] https://gcc.gnu.org/ml/gcc-patches/2018-07/msg00912.html ChangeLog: * sysdeps/s390/s390-64/Versions (__fentry__): Add. * sysdeps/s390/s390-64/s390x-mcount.S: Move the common code to s390x-mcount.h and #include it. * sysdeps/s390/s390-64/s390x-mcount.h: New file. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist (__fentry__): Add.
* Move __fentry__ version definition to sysdeps/{i386,x86_64}Ilya Leoshkevich2018-08-104-3/+12
| | | | | | | | | | | | | | __fentry__ symbol is currently not defined for other architectures. Attempts to introduce it cause abicheck to fail, because it will be available since 2.29 earliest, and not 2.13, which is the case for Intel. With the new code, abicheck passes for i686-linux-gnu, x86_64-linux-gnu and x86_64-linux-gnu32 triples. ChangeLog: * stdlib/Versions: Remove __fentry__. * sysdeps/i386/Versions: Add __fentry__. * sysdeps/x86_64/Versions: Add __fentry__.
* S390: Test that lazy binding does not clobber R0Ilya Leoshkevich2018-08-108-0/+230
| | | | | | | | | | | | | | | | | | | | | | The following combinations need to be tested: * 32- (g5, esa and zarch) and 64-bit * linux32 glibc/configure CC='gcc -m31 -march=g5' * linux32 glibc/configure CC='gcc -m31' * linux32 glibc/configure CC='gcc -m31 -mzarch' * With and without VX: * glibc/configure libc_cv_asm_s390_vx=no * With and without profiling (using LD_PROFILE) * With and without pltexit (using LD_AUDIT) ChangeLog: * sysdeps/s390/Makefile: Register the new tests. * sysdeps/s390/tst-dl-runtime-mod.S: New file. * sysdeps/s390/tst-dl-runtime-profile-audit.c: New file. * sysdeps/s390/tst-dl-runtime-profile-noaudit.c: New file. * sysdeps/s390/tst-dl-runtime-resolve-audit.c: New file. * sysdeps/s390/tst-dl-runtime-resolve-noaudit.c: New file. * sysdeps/s390/tst-dl-runtime.c: New file.
* S390: Do not clobber R0 in 64-bit _dl_runtime_profileIlya Leoshkevich2018-08-102-0/+11
| | | | | | | | | Preparation for the usage of R0 by __fentry__. ChangeLog: * sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_profile): Do not clobber R0.
* S390: Do not clobber R0 in 64-bit _dl_runtime_resolveIlya Leoshkevich2018-08-102-2/+13
| | | | | | | | | Preparation for the usage of R0 by __fentry__. ChangeLog: * sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_resolve): Do not clobber R0.
* S390: Do not clobber R0 in 32-bit _dl_runtime_profileIlya Leoshkevich2018-08-102-0/+11
| | | | | | | | | Preparation for the usage of R0 by __fentry__. ChangeLog: * sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_profile): Do not clobber R0.
* S390: Do not clobber R0 in 32-bit _dl_runtime_resolveIlya Leoshkevich2018-08-102-2/+13
| | | | | | | | | Preparation for the usage of R0 by __fentry__. ChangeLog: * sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_resolve): Do not clobber R0.
* S390: Use symbolic offsets for stack variables in 64-bit _dl_runtime_profileIlya Leoshkevich2018-08-102-84/+148
| | | | | | | | | Maintainability improvement. ChangeLog: * sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_profile): Use symbolic offsets for stack variables.
* S390: Use symbolic offsets for stack variables in 64-bit _dl_runtime_resolveIlya Leoshkevich2018-08-102-41/+88
| | | | | | | | | Maintainability improvement. ChangeLog: * sysdeps/s390/s390-64/dl-trampoline.h (_dl_runtime_resolve): Use symbolic offsets for stack variables.
* S390: Use symbolic offsets for stack variables in 32-bit _dl_runtime_profileIlya Leoshkevich2018-08-102-78/+140
| | | | | | | | | Maintainability improvement. ChangeLog: * sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_profile): Use symbolic offsets for stack variables.
* S390: Use symbolic offsets for stack variables in 32-bit _dl_runtime_resolveIlya Leoshkevich2018-08-102-36/+78
| | | | | | | | | Maintainability improvement. ChangeLog: * sysdeps/s390/s390-32/dl-trampoline.h (_dl_runtime_resolve): Use symbolic offsets for stack variables.
* Replace gen-libm-test.pl with gen-libm-test.py.Joseph Myers2018-08-0910-875/+651
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following the recent discussion of using Python instead of Perl and Awk for glibc build / test, this patch replaces gen-libm-test.pl with a new gen-libm-test.py script. This script should work with all Python versions supported by glibc (tested by hand with Python 2.7, tested in the build system with Python 3.5; configure prefers Python 3 if available). This script is designed to give identical output to gen-libm-test.pl for ease of verification of the change, except for generated comments referring to .py instead of .pl. (That is, identical for actual inputs passed to the script, not necessarily for all possible input; for example, this version more precisely follows the C standard syntax for floating-point constants when deciding when to add LIT macro calls.) In one place a comment notes that the generation of NON_FINITE flags is replicating a bug in the Perl script to assist in such comparisons (with the expectation that this bug can then be separately fixed in the Python script later). Tested for x86_64, including comparison of generated files (and hand testing of the case of generating a sorted libm-test-ulps file, which isn't covered by normal "make check"). I'd expect to follow this up by extending the new script to produce the ulps tables for the manual as well (replacing manual/libm-err-tab.pl, so that then we just have one ulps file parser) - at which point the manual build would depend on both Perl and Python (eliminating the Perl dependency would require someone to rewrite summary.pl in Python, and that would only eliminate the *direct* Perl dependency; current makeinfo is written in Perl so there would still be an indirect dependency). I think install.texi is more or less equally out-of-date regarding Perl and Python uses before and after this patch, so I don't think this patch depends on my patch <https://sourceware.org/ml/libc-alpha/2018-08/msg00133.html> to update install.texi regarding such uses (pending review). * math/gen-libm-test.py: New file. * math/gen-libm-test.pl: Remove. * math/Makefile [$(PERL) != no]: Change condition to [PYTHON]. ($(objpfx)libm-test-ulps.h): Use gen-libm-test.py instead of gen-libm-test.pl. ($(libm-test-c-noauto-obj)): Likewise. ($(libm-test-c-auto-obj)): Likewise. ($(libm-test-c-narrow-obj)): Likewise. (regen-ulps): Likewise. * math/README.libm-test: Update references to gen-libm-test.pl. * math/libm-test-driver.c (struct test_fj_f_data): Update comment referencing gen-libm-test.pl. * math/libm-test-nexttoward.inc (nexttoward_test_data): Likewise. * math/libm-test-support.c: Likewise. * math/libm-test-support.h: Likewise. * sysdeps/generic/libm-test-ulps: Likewise.
* hurd: Avoid PLTs for __pthread_get/setspecificSamuel Thibault2018-08-094-0/+8
| | | | | | | * sysdeps/htl/pthreadP.h [IS_IN (libpthread)] (__pthread_getspecific, __pthread_setspecific): Add hidden proto. * sysdeps/htl/pt-getspecific.c (__pthread_getspecific): Add hidden def. * sysdeps/htl/pt-setspecific.c (__pthread_setspecific): Add hidden def.
* [aarch64] Fix value of MIN_PAGE_SIZE for testingSiddhesh Poyarekar2018-08-082-1/+6
| | | | | | | | | | MIN_PAGE_SIZE is normally set to 4096 but for testing it can be set to 16 so that it exercises the page crossing code for every misaligned access. The value was set to 15, which is obviously wrong, so fixed as obvious and tested. * sysdeps/aarch64/strlen.S [TEST_PAGE_CROSS](MIN_PAGE_SIZE): Fix value.
* Move comment from libm-test-nextdown.inc to libm-test-nexttoward.inc.Joseph Myers2018-08-083-5/+9
| | | | | | | | | | | | | | When libm tests were split into separate per-function .inc files, a comment relating to the nexttoward tests ended up at the end of libm-test-nextdown.inc (because the split was based on starting each function's tests with the <function>_test_data definition, which failed to allow for comments before such definitions). This patch moves that comment to the correct location. Tested for x86_64. * math/libm-test-nextdown.inc (do_test): Move comment to .... * math/libm-test-nexttoward.inc (nexttoward_test_data): ... here.
* hurd: Add missing symbols for proper libc_get/setspecificSamuel Thibault2018-08-082-0/+7
| | | | | * htl/Versions (__pthread_getspecific, __pthread_setspecific): Add symbols.
* benchtests: Clean up the alloc_bufsSiddhesh Poyarekar2018-08-087-33/+57
| | | | | | | | | | | | | | | | | | | | Drop realloc_bufs in favour of making alloc_bufs transparently reallocate the buffers if it had allocated before. Also consolidate computation of buffer lengths so that they don't get repeated on every reallocation. * benchtests/bench-string.h (buf1_size, buf2_size): New variables. (init_sizes): New function. (test_init): Use it. (alloc_buf, exit_error): New functions. (alloc_bufs): Use ALLOC_BUF. (realloc_bufs): Remove. * benchtests/bench-memcmp.c (do_test): Adjust. * benchtests/bench-memset-large.c (do_test): Likewise. * benchtests/bench-memset-walk.c (do_test): Likewise. * benchtests/bench-memset.c (do_test): Likewise. * benchtests/bench-strncmp.c (do_test): Likewise.
* RISC-V: Don't use ps_get_thread_area in libthread_db (bug 23402)Andreas Schwab2018-08-062-2/+8
| | | | | | | | | Since RISC-V stores the thread pointer in a general register libthread_db can just ask the debugger for the register contents instead of trying to call ps_get_thread_area. This enables thread debugging in gdb. * sysdeps/riscv/nptl/tls.h (DB_THREAD_SELF): Use REGISTER instead of CONST_THREAD_AREA.
* x86: Move STATE_SAVE_OFFSET/STATE_SAVE_MASK to sysdep.hH.J. Lu2018-08-064-15/+20
| | | | | | | | | | | | | Move STATE_SAVE_OFFSET and STATE_SAVE_MASK to sysdep.h to make sysdeps/x86/cpu-features.h a C header file. * sysdeps/x86/cpu-features.h (STATE_SAVE_OFFSET): Removed. (STATE_SAVE_MASK): Likewise. Don't check __ASSEMBLER__ to include <cpu-features-offsets.h>. * sysdeps/x86/sysdep.h (STATE_SAVE_OFFSET): New. (STATE_SAVE_MASK): Likewise. * sysdeps/x86_64/dl-trampoline.S: Include <cpu-features-offsets.h> instead of <cpu-features.h>.
* Improve ChangeLog message.DJ Delorie2018-08-031-1/+1
|
* Regen RISC-V rvd ULPsDJ Delorie2018-08-032-4/+14
| | | | | | | | * sysdeps/riscv/rv64/rvd/libm-test-ulps: Update. Note: I regen'd these from scratch, but I'm only committing the increases, as I only tested on hardware. There were a few 2->1 decreases that I omitted, possibly "for now".
* RISC-V: Fix rounding save/restore bug.DJ Delorie2018-08-032-1/+6
| | | | | | | * sysdeps/riscv/rvf/math_private.h (libc_feholdexcept_setround_riscv): Fix rounding save-restore bug. Fixes about a hundred off-by-ULP failures in the math testsuite.
* Consistently terminate libm-test-*.inc TEST lines with commas.Joseph Myers2018-08-034-22/+29
| | | | | | | | | | | | | | | | | Some TEST_* lines in libm-test-*.inc end with semicolons not commas. This works at present because gen-libm-test.pl ignores whatever comes after the TEST_* call, but is logically wrong (since the TEST_* calls generate array elements, not statements) and the Python replacement for gen-libm-test.pl that I'm working on is stricter about the syntax here. This patch fixes the lines in question to use commas like most such lines already do. Tested for x86_64. * math/libm-test-ilogb.inc (ilogb_test_data): Use ',' not ';' after TEST_* calls. * math/libm-test-llogb.inc (llogb_test_data): Likewise. * math/libm-test-logb.inc (logb_test_data): Likewise.
* Simplify and speedup strstr/strcasestr first matchWilco Dijkstra2018-08-033-45/+40
| | | | | | | | | | | | Looking at the benchtests, both strstr and strcasestr spend a lot of time in a slow initialization loop handling one character per iteration. This can be simplified and use the much faster strlen/strnlen/strchr/memcmp. Read ahead a few cachelines to reduce the number of strnlen calls, which improves performance by ~3-4%. This patch improves the time taken for the full strstr benchtest by >40%. * string/strcasestr.c (STRCASESTR): Simplify and speedup first match. * string/strstr.c (AVAILABLE): Likewise.
* x86: Don't include <init-arch.h> in assembly codesH.J. Lu2018-08-035-4/+8
| | | | | | | | | | | | There is no need to include <init-arch.h> in assembly codes since all x86 IFUNC selector functions are written in C. Tested on i686 and x86-64. There is no code change in libc.so, ld.so and libmvec.so. * sysdeps/i386/i686/multiarch/bzero-ia32.S: Don't include <init-arch.h>. * sysdeps/x86_64/fpu/multiarch/svml_d_sin8_core-avx2.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_expf16_core-avx2.S: Likewise. * sysdeps/x86_64/multiarch/memset-sse2-unaligned-erms.S: Likewise.
* Update be translations.Carlos O'Donell2018-08-032-32/+34
|
* Update be translations.Carlos O'Donell2018-08-032-30/+56
|
* x86: Cleanup cpu-features-offsets.symH.J. Lu2018-08-032-19/+21
| | | | | | | | | | | | | | | | | | | | | | | Remove the unused macros. There is no code changes in libc.so nor ld.so on i686 and x86-64. * sysdeps/x86/cpu-features-offsets.sym (rtld_global_ro_offsetof): Removed. (CPU_FEATURES_SIZE): Likewise. (CPUID_OFFSET): Likewise. (CPUID_SIZE): Likewise. (CPUID_EAX_OFFSET): Likewise. (CPUID_EBX_OFFSET): Likewise. (CPUID_ECX_OFFSET): Likewise. (CPUID_EDX_OFFSET): Likewise. (FAMILY_OFFSET): Likewise. (MODEL_OFFSET): Likewise. (FEATURE_OFFSET): Likewise. (FEATURE_SIZ): Likewise. (COMMON_CPUID_INDEX_1): Likewise. (COMMON_CPUID_INDEX_7): Likewise. (FEATURE_INDEX_1): Likewise. (RTLD_GLOBAL_RO_DL_X86_CPU_FEATURES_OFFSET): Updated.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-16 17:33:23 +0000