about summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
...
* x86-64: Fix comment typo in memcmp-avx2-movbe.SFlorian Weimer2017-06-232-1/+5
|
* resolv/res_libc.c: Reformat to GNU styleFlorian Weimer2017-06-232-67/+90
|
* resolv: Clean up declarations of the __res_initstamp variableFlorian Weimer2017-06-234-2/+12
|
* x86-64: memcmp-avx2-movbe.S needs saturating subtraction [BZ #21662]Florian Weimer2017-06-233-15/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | This code: L(between_2_3): /* Load as big endian with overlapping loads and bswap to avoid branches. */ movzwl -2(%rdi, %rdx), %eax movzwl -2(%rsi, %rdx), %ecx shll $16, %eax shll $16, %ecx movzwl (%rdi), %edi movzwl (%rsi), %esi orl %edi, %eax orl %esi, %ecx bswap %eax bswap %ecx subl %ecx, %eax ret needs a saturating subtract because the full register is used. With this commit, only the lower 24 bits of the register are used, so a regular subtraction suffices. The test case change adds coverage for these kinds of bugs.
* Add libio-mtsafe flags to the build of strfromf128Gabriel F. T. Gomes2017-06-232-0/+9
| | | | | | | | | | | Similar to the other functions in the strfrom class, strfromf128 calls __printf_fp in order to convert the floating-point value to characters. This requires the value of IO_MTSAFE_IO. Tested for powerpc64le and s390x. * sysdeps/ieee754/float128/Makefile (CFLAGS-strfromf128.c): Add $(libio-mtsafe) to get the value of IO_MTSAFE_IO.
* Prepare the manual to display math errors for float128 functionsGabriel F. T. Gomes2017-06-232-3/+9
| | | | | | | | | | | When float128 support gets enabled for powerpc64le, the ULP errors for float128 functions need to be presented in the manual. This patch adds support for displaying them. Tested for powerpc64le and s390x. * manual/libm-err-tab.pl (@all_floats, %suffices, parse_ulps): Enable generation of float128 entries on the error table.
* Include libc-header-start.h in include/float.hGabriel F. T. Gomes2017-06-232-0/+8
| | | | | | | | | | | The file include/float.h uses the macro __GLIBC_USE to test for TS 18661-3 support. Such macro is provided by bits/libc-header-start.h, so include it to get the definition. Tested for powerpc64le and s390x. * include/float.h: Include libc-header-start.h to get the definition of __GLIBC_USE.
* Optimized version of powf()Paul Clarke2017-06-232-101/+75
| | | | | | | | | Most significant changes are code simplification and use of doubles for intermediate values. Also, some rearrangement to move early non-dependent code later, out of the faster paths. * sysdeps/ieee754/flt-32/e_powf.c: Optimized implementation utilizing rearranged code and doubles float types.
* powerpc: Fix sinf() IFUNC fallback.Rogerio A. Cardoso2017-06-232-1/+6
| | | | | | | | sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf-ppc64.c should fall back to sysdeps/powerpc/fpu/s_sinf.c not to sysdeps/ieee754/flt-32/s_sinf.c. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf-ppc64.c: Change s_sinf.c from sysdeps/ieee754/flt-32/ to sysdeps/powerpc/fpu/.
* powerpc: fix sysconf support for cache geometriesPaul Clarke2017-06-232-29/+13
| | | | | | | | | Commit cdfbe5037f2f67bf5f560b73732b69d0fabe2314 added sysconf support for cache geometries on powerpc, but mishandled errno. For valid input parameters, sysconf() should not set errno. * sysdeps/unix/sysv/linux/powerpc/sysconf.c: Remove references to errno, and simplify remaining related code.
* powerpc: Update AT_HWCAP[2] bitsTulio Magno Quites Machado Filho2017-06-233-1/+11
| | | | | | | | | | | | | | Linux commit ID a4700a26107241cc7b9ac8528b2c6714ff99983d reserved 2 more bits for the instructions darn (Deliver a Random Number) and scv (System Call Vectored). Linux commit ID 6997e57d693b07289694239e52a10d2f02c3a46f reserved another bit for internal usage. * sysdeps/powerpc/bits/hwcap.h: Add PPC_FEATURE2_DARN and PPC_FEATURE2_SCV. * sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add scv and darn.
* powerpc: refactor strrchr IFUNCRajalakshmi Srinivasaraghavan2017-06-233-19/+16
| | | | | | As done in commit 6d15a5c2e9450a1e926d5b4991759e1cfa50fccf clean up IFUNC implementation for power8 in order to remove unneeded macro definitions.
* powerpc: Add optimized version of [l]lroundfRajalakshmi Srinivasaraghavan2017-06-2310-1/+120
| | | | | This patch makes use of optimized double version of llround for single precision as both the versions return [long] long type.
* Support _Float128 in ldbl-96 bits/iscanonical.h.Joseph Myers2017-06-222-0/+6
| | | | | | | | | | This patch adds _Float128 support to the ldbl-96 bits/iscanonical.h, as needed for x86_64 / x86 / ia64 support of _Float128. Tested for x86_64 (in conjunction with float128 patches). * sysdeps/ieee754/ldbl-96/bits/iscanonical.h [__HAVE_DISTINCT_FLOAT128] (__iscanonicalf128): New macro.
* Support _Float128 in math-tests.h.Joseph Myers2017-06-222-12/+39
| | | | | | | | | | | | | | | | | | | | | | This patch makes math-tests.h, as used to describe support of given floating-point types for sNaNs, rounding modes and exceptions, handle distinguishing _Float128 from long double. This is needed for x86_64, where if building with GCC 6 or earlier there is no __builtin_nansq, so no way to get a signaling NaN of _Float128 type, so associated tests cannot be run (although glibc itself works fine, as there is never any need to create such an sNaN with a built-in function inside glibc). Tested for x86_64 (in conjunction with float128 patches). * sysdeps/generic/math-tests.h: Include <bits/floatn.h>. (MATH_TESTS_TG): New macro. (SNAN_TESTS_float128): Likewise. (ROUNDING_TESTS_float128): Likewise. (EXCEPTION_TESTS_float128): Likewise. (SNAN_TESTS): Define using MATH_TESTS_TG. (ROUNDING_TESTS): Likewise. (EXCEPTION_TESTS): Likewise.
* Fix float128_private.h redefinition of SET_RESTORE_ROUNDL.Joseph Myers2017-06-222-1/+5
| | | | | | | | | | | | | | | | As with other long double identifiers, float128_private.h has a redefinition of SET_RESTORE_ROUNDL. However, that redefinition is broken, since this is a macro with one argument being defined to take no arguments. This patch fixes the redefinition. (x86_64 needs the redefinition because SET_RESTORE_ROUNDL only changes the x87 rounding mode, whereas _Float128 arithmetic uses the SSE rounding mode instead on x86_64.) Tested for x86_64 (in conjunction with float128 patches). * sysdeps/ieee754/float128/float128_private.h [SET_RESTORE_ROUNDF128] (SET_RESTORE_ROUNDL): Take an argument and pass it to SET_RESTORE_ROUNDF128.
* Make float128_private.h work with generic ieee754.h.Joseph Myers2017-06-222-0/+7
| | | | | | | | | | | | | | | | | | float128_private.h redefines ieee754.h identifiers ieee854_long_double and IEEE854_LONG_DOUBLE_BIAS to map them to identifiers from ieee754_float128.h. This causes problems when ieee754.h is included after float128_private.h and it's a version of ieee754.h that also defines those identifiers; specifically, sysdeps/ieee754/ieee754.h, which defines those identifiers for the x86 extended format. This patch fixes this by ensuring an include of ieee754.h from float128_private.h before the redefinitions. Tested for x86_64 (in conjunction with float128 patches). * sysdeps/ieee754/float128/float128_private.h: Include <ieee754.h>.
* Correct min_of_type handling of _Float128.Joseph Myers2017-06-222-2/+6
| | | | | | | | | | | | | | | | | | | | | The math_private.h macro min_of_type has broken _Float128 handling: instead of passing its type argument to the key __EXPR_FLT128 macro, it passes x, which is not a macro argument but whatever variable called x happens to be visible in the calling function. If that variable has the wrong type, the wrong one of long double and _Float128 can get chosen. In particular, this applies to some _Complex long double functions (where x happens to have type _Complex long double, resulting in min_of_type returning a _Float128 value when it should return a long double value). For some reason, this only caused test failures for me on x86_64 with GCC 6 but not GCC 7 (I suspect it triggers known bugs in conversions from x86 long double to _Float128 that are present in GCC 6's soft-fp). Tested for x86_64 (in conjunction with float128 patches). * sysdeps/generic/math_private.h (__EXPR_FLT128): Do not apply typeof to argument passed to __builtin_types_compatible_p. (min_of_type): Pass type argument, not x, to __EXPR_FLT128.
* Make errno-setting libm templates include errno.h.Joseph Myers2017-06-2224-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various type-generic libm wrapper templates, as used for float128, set errno but do not include errno.h. I presume they must get an implicit include from some internal header on powerpc64le; they don't get such an implicit include on x86_64. This patch adds the missing includes of errno.h to each such wrapper. Tested for x86_64 (in conjunction with float128 patches). * math/w_acos_template.c [__USE_WRAPPER_TEMPLATE]: Include <errno.h>. * math/w_acosh_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_asin_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_atanh_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_cosh_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_exp10_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_exp2_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_exp_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_fmod_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_hypot_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_j0_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_j1_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_jn_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_lgamma_r_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_lgamma_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_log10_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_log2_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_log_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_pow_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_remainder_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_sinh_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_sqrt_template.c [__USE_WRAPPER_TEMPLATE]: Likewise. * math/w_tgamma_template.c [__USE_WRAPPER_TEMPLATE]: Likewise.
* Fix float128 uses of xlocale.h.Joseph Myers2017-06-224-3/+10
| | | | | | | | | | | | | | Three float128 files still include xlocale.h after it was removed. I don't know why this didn't cause problems for powerpc64le float128 testing; it did cause problems for my x86_64 float128 testing. This patch changes the includes to use bits/types/locale_t.h. Tested for x86_64 (in conjunction with float128 patches). * sysdeps/ieee754/float128/strtof128_l.c: Include <bits/types/locale_t.h> instead of <xlocale.h>. * sysdeps/ieee754/float128/wcstof128.c: Likewise. * sysdeps/ieee754/float128/wcstof128_l.c: Likewise.
* Add ChangeLog entries for the last 3 commitsSiddhesh Poyarekar2017-06-221-0/+25
| | | | I forgot to add ChangeLog entries for my last three commits.
* benchtests: New script to parse memcpy resultsSiddhesh Poyarekar2017-06-222-0/+173
| | | | | | | | | | | | Read the memcpy results in json and print out the results in tabular form, in addition to generating a graph of the results to compare all of the implementations. The format of the output is extensible enough to allow this kind of analysis to be done on other string functions as well. * benchtests/scripts/benchout_strings.schema.json: New file. * benchtests/scripts/compare_strings.py: New file.
* benchtests: Make memcpy benchmarks print results in jsonSiddhesh Poyarekar2017-06-223-49/+117
| | | | | | | | | | | | | | | | | | Print the benchmark output for various memcpy benchmarks in json so that it can be predictably parsed and analyzed. * benchtests/bench-memcpy-large.c: Include json-lib.h. (do_one_test): Print json. (do_test): Likewise. (test_main): Likewise. * benchtests/bench-memcpy-random.c: Include json-lib.h. (do_one_test): Print json. (do_test): Likewise. (test_main): Likewise. * benchtests/bench-memcpy.c: Include json-lib.h. (do_one_test): Print json. (do_test): Likewise. (test_main): Likewise.
* benchtests: Print string array elements, int and uint in jsonSiddhesh Poyarekar2017-06-222-0/+68
| | | | | | | | | | | | Enhance the json module in benchtests to print signed and unsigned integers and string array elements. * benchtests/json-lib.h: Include inttypes.h. (json_attr_int, json_attr_int, json_element_string, json_element_int, json_element_uint): New functions. * benchtests/json-lib.c: (json_attr_int, json_attr_int, json_element_string, json_element_int, json_element_uint): New functions.
* Describe remainder as primary and drem as alternative in the manualGabriel F. T. Gomes2017-06-222-12/+18
| | | | | | | | | | | In preparation for the documentation of _FloatN and _FloatNx variants of the remainder function, this patch changes the descriptions of remainder and drem, so that remainder is described as primary and drem as an alternative name for the same functionality. * manual/arith.texi (Remainder Functions): Describe remainder as primary and drem as an alternative name. Change the comment on remainder to ISO, since it is defined in ISO C99.
* Provide an additional macro expansion for F128 in stdlib/tst-strtod.hGabriel F. T. Gomes2017-06-222-1/+11
| | | | | | | | | | | | | | | | The macro F128 in stdlib/tst-strtod.h is defined to provide the literal suffix for _Float128 constants. It uses the macro __f128 (), which is defined in bits/floatn.h to provide the correct literal suffix depending on what is provided by the compiler. However, F128 was not being expanded and only worked correctly, when compiling with GCC 7 (or greater), since F128 is the literal suffix itself. This patch adds an additional macro expansion so that the macro F128 expands to the correct literal suffix on older compilers. * stdlib/tst-strtod.h (MMFUNC): New macro to provide an addition macro expansion. (GEN_TEST_STRTOD_FOREACH): Use MMFUNC for _Float128.
* localedata: fur_IT: Fix spelling of Wednesday (Miercus)Rafal Luzynski2017-06-222-2/+7
| | | | | * localedata/locales/fur_IT (day, abday): reworded "Miarcus" to "Miercus" and abbreviated "Mia" to "Mie".
* Bug 21533: Update to Unicode 10.0.0Mike FABIAN2017-06-2216-1098/+3791
| | | | | | * Unicode 10.0.0 Support: Character encoding, character type info, and transliteration tables are all updated to Unicode 10.0.0, using generator scripts contributed by Mike FABIAN (Red Hat).
* inet: __inet6_scopeid_pton should accept node-local addresses [BZ #21657]Benjamin Cama2017-06-223-1/+9
|
* _nl_load_domain: Use calloc instead of allocaFlorian Weimer2017-06-212-38/+12
|
* Implement allocation buffers for internal useFlorian Weimer2017-06-2110-1/+1240
| | | | | | | | | This commit adds fixed-size allocation buffers. The primary use case is in NSS modules, where dynamically sized data is stored in a fixed-size buffer provided by the caller. Other uses include a replacement of mempcpy cascades (which is safer due to the size checking inherent to allocation buffers).
* x86-64: Implement strcmp family IFUNC selectors in CH.J. Lu2017-06-2125-240/+643
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement strcmp family IFUNC selectors in C. All internal calls within libc.so can use IFUNC on x86-64 since unlike x86, x86-64 supports PC-relative addressing to access the GOT entry so that it can call via PLT without using an extra register. For libc.a, we can't use IFUNC for functions which are called before IFUNC has been initialized. Use IFUNC internally reduces the icache footprint since libc.so and other codes in the process use the same implementations. This patch uses IFUNC for strcmp family functions within libc. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add strcmp-sse2, strcmp-sse4_2, strncmp-sse2, strncmp-sse4_2, strcasecmp_l-sse2, strcasecmp_l-sse4_2, strcasecmp_l-avx, strncase_l-sse2, strncase_l-sse4_2 and strncase_l-avx. * sysdeps/x86_64/multiarch/ifunc-strcasecmp.h: New file. * sysdeps/x86_64/multiarch/strcasecmp.c: Likewise. * sysdeps/x86_64/multiarch/strcasecmp_l-avx.S: Likewise. * sysdeps/x86_64/multiarch/strcasecmp_l-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strcasecmp_l-sse4_2.S: Likewise. * sysdeps/x86_64/multiarch/strcasecmp_l.c: Likewise. * sysdeps/x86_64/multiarch/strcmp-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strcmp-sse4_2.S: Likewise. * sysdeps/x86_64/multiarch/strcmp.c: Likewise. * sysdeps/x86_64/multiarch/strncase.c: Likewise. * sysdeps/x86_64/multiarch/strncase_l-avx.S : Likewise. * sysdeps/x86_64/multiarch/strncase_l-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strncase_l-sse4_2.S: Likewise. * sysdeps/x86_64/multiarch/strncase_l.c: Likewise. * sysdeps/x86_64/multiarch/strncmp-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strncmp-sse4_2.S: Likewise. * sysdeps/x86_64/multiarch/strncmp.c: Likewise. * sysdeps/x86_64/multiarch/strcasecmp_l.S: Removed. * sysdeps/x86_64/multiarch/strcmp.S: Likewise. * sysdeps/x86_64/multiarch/strncase_l.S: Likewise. * sysdeps/x86_64/multiarch/strncmp.S: Likewise. * sysdeps/x86_64/multiarch/strcmp-sse42.S: Include <sysdep.h>. (STRCMP_SSE42): New. Defined to __strcmp_sse42 if not defined. [USE_AS_STRCASECMP_L || USE_AS_STRNCASECMP_L]: Include "locale-defines.h". (UPDATE_STRNCMP_COUNTER): New. (SECTION): Likewise. (GLABEL): Likewise. (LABEL): Likewise. * sysdeps/x86_64/multiarch/strncmp-ssse3.S: Rewrite and enable for libc.a.
* Fix tile SA_* conditions for POSIX.1:2008 (bug 21622).Joseph Myers2017-06-212-0/+11
| | | | | | | | | | | | | | | | | | | As shown by conform/ tests once the remaining namespace issues are fixed, the tile bits/sigaction.h fails to declare SA_RESETHAND, SA_RESTART and SA_NODEFER for non-XSI POSIX.1:2008 as other versions do. Those constants were moved from XSI to Base in the 2008 edition of POSIX. This patch fixes the conditions to match other versions of this header. Tested (compilation only) for tilegx-linux-gnu with build-many-glibcs.py. [BZ #21622] * sysdeps/unix/sysv/linux/tile/bits/sigaction.h (SA_RESTART): Define for [__USE_UNIX98 || __USE_XOPEN2K8], not [__USE_UNIX98 || __USE_MISC]. (SA_NODEFER): Likewise. (SA_RESETHAND): Likewise.
* x86: Rename glibc.tune.ifunc to glibc.tune.hwcapsH.J. Lu2017-06-217-34/+41
| | | | | | | | | | | | | | | | | | | | | | | | Rename glibc.tune.ifunc to glibc.tune.hwcaps and move it to sysdeps/x86/dl-tunables.list since it is x86 specicifc. Also change type of data_cache_size, data_cache_size and non_temporal_threshold to unsigned long int to match size_t. Remove usage DEFAULT_STRLEN from cpu-tunables.c. * elf/dl-tunables.list (glibc.tune.ifunc): Removed. * sysdeps/x86/dl-tunables.list (glibc.tune.hwcaps): New. Remove security_level on all fields. * manual/tunables.texi: Replace ifunc with hwcaps. * sysdeps/x86/cpu-features.c (TUNABLE_CALLBACK (set_ifunc)): Renamed to .. (TUNABLE_CALLBACK (set_hwcaps)): This. (init_cpu_features): Updated. * sysdeps/x86/cpu-features.h (cpu_features): Change type of data_cache_size, data_cache_size and non_temporal_threshold to unsigned long int. * sysdeps/x86/cpu-tunables.c (DEFAULT_STRLEN): Removed. (TUNABLE_CALLBACK (set_ifunc)): Renamed to ... (TUNABLE_CALLBACK (set_hwcaps)): This. Update comments. Don't use DEFAULT_STRLEN.
* DCIGETTEXT: Use getcwd, asprintf to construct absolute pathnameFlorian Weimer2017-06-212-28/+19
|
* [AArch64] Add more cfi annotations to tlsdesc entry pointsSzabolcs Nagy2017-06-212-0/+76
| | | | | | | | Backtrace through _dl_tlsdesc_resolve_rela was broken because the offset of x30 from cfa was not in the debug info. Add enough annotation so backtracing from the dynamic linker through tlsdesc entry points works and the debugger shows registers correctly.
* posix: Add invalid flags test for p{write,read}v2Adhemerval Zanella2017-06-214-0/+60
| | | | | | | | | | | | | | | | This patch add an extra test for passing invalid flags and check its expected failure. It shows an invalid LO_HI_LONG macro definition for x86_64 with leads to passing invalid flags on some configurations. The new tests fails on i686-linux-gnu and potentially on other 32 bits architecture that uses the compat syscall definition due a kernel bug. It is intended to be fixed upstream. Checked on x86_64-linux-gnu * misc/tst-preadvwritev2-common.c: New file. * misc/tst-preadvwritev2.c (do_test): Add test for invalid flag. * misc/tst-preadvwritev64v2.c (do_test): Likewise.
* [AArch64] Use hidden __GI__dl_argv in rtld startup codeSzabolcs Nagy2017-06-212-2/+7
| | | | | We rely on the symbol being locally defined so using extern symbol is not correct and the linker may complain about the relocations.
* getaddrinfo: Avoid stack copy of IPv6 addressFlorian Weimer2017-06-212-40/+10
|
* __inet_pton_length: Implement new internal helper functionFlorian Weimer2017-06-219-73/+697
|
* inet: Add IPv6 getaddrinfo coverage to tst-inet6_scopeid_pton.cFlorian Weimer2017-06-212-10/+116
|
* powerpc: Optimize memchr for power8Rajalakshmi Srinivasaraghavan2017-06-216-1/+382
| | | | | Vectorized loops are used for sizes greater than 32B to improve performance over power7 optimiztion.
* powerpc: Add optimized version of [l]lrintfRajalakshmi Srinivasaraghavan2017-06-216-36/+80
| | | | | This patch makes use of optimized double version of llrint for single precision as both the versions return [long] long type.
* Factor out shared definitions from bits/signum.h.Zack Weinberg2017-06-2015-406/+417
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many of the things defined by bits/signum.h are invariant across all supported operating systems. This patch factors out all of them to a new header bits/signum-generic.h, which each bits/signum.h will include and then override whichever things need adjustment. Normally that will mean, at most, adding or changing a few signal numbers. A user-visible side effect is that the obsolete signal constant SIGUNUSED (which is an alias for SIGSYS on all platforms that define it) is no longer exposed by any version of bits/signum.h. A side effect only relevant to glibc hackers is that _NSIG is now defined in terms of __SIGRTMAX, instead of the other way around. This is because __SIGRTMAX varies from platform to platform, but _NSIG==__SIGRTMAX+1 is true universally. If your platform doesn't support realtime signals, leave __SIGRTMAX equal to __SIGRTMIN. I also added a Linux-specific test to make sure that our signal constants match the ones in <asm/signal.h>, since we can't use that header (it's not even vaguely namespace-clean). * bits/signum-generic.h: Renamed from bits/signum.h. Add proper multiple include guard and misuse check. Define __SIGRTMIN = __SIGRTMAX = 32, and define _NSIG = __SIGRTMAX+1. Move definition of SIGIO to "archaic names for compatibility" section. * bits/signum.h: New file which just includes bits/signum-generic.h. * sysdeps/unix/bsd/bits/signum.h * sysdeps/unix/sysv/linux/bits/signum.h * sysdeps/unix/sysv/linux/alpha/bits/signum.h * sysdeps/unix/sysv/linux/hppa/bits/signum.h * sysdeps/unix/sysv/linux/mips/bits/signum.h * sysdeps/unix/sysv/linux/sparc/bits/signum.h Just include <bits/signum-generic.h> and then add or adjust signal constants. Do not define SIGUNUSED, SIGRTMIN, or SIGRTMAX. * signal/Makefile: Install bits/signum-generic.h. * signal/signal.h: Define SIGRTMIN and SIGRTMAX here. * sysdeps/generic/siglist.h: SIGSYS and SIGWINCH are universal. Prefer SIGPOLL to SIGIO. Simplify #ifdeffage. * sysdeps/unix/sysv/linux/tst-signal-numbers.sh: New test. * sysdeps/unix/sysv/linux/Makefile: Run it.
* Use locale_t, not __locale_t, throughout glibcZack Weinberg2017-06-2073-175/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | <locale.h> is specified to define locale_t in POSIX.1-2008, and so are all of the headers that define functions that take locale_t arguments. Under _GNU_SOURCE, the additional headers that define such functions have also always defined locale_t. Therefore, there is no need to use __locale_t in public function prototypes, nor in any internal code. * ctype/ctype-c99_l.c, ctype/ctype.h, ctype/ctype_l.c * include/monetary.h, include/stdlib.h, include/time.h * include/wchar.h, locale/duplocale.c, locale/freelocale.c * locale/global-locale.c, locale/langinfo.h, locale/locale.h * locale/localeinfo.h, locale/newlocale.c * locale/nl_langinfo_l.c, locale/uselocale.c * localedata/bug-usesetlocale.c, localedata/tst-xlocale2.c * stdio-common/vfscanf.c, stdlib/monetary.h, stdlib/stdlib.h * stdlib/strfmon_l.c, stdlib/strtod_l.c, stdlib/strtof_l.c * stdlib/strtol.c, stdlib/strtol_l.c, stdlib/strtold_l.c * stdlib/strtoll_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c * string/strcasecmp.c, string/strcoll_l.c, string/string.h * string/strings.h, string/strncase.c, string/strxfrm_l.c * sysdeps/ieee754/float128/strtof128_l.c * sysdeps/ieee754/float128/wcstof128.c * sysdeps/ieee754/float128/wcstof128_l.c * sysdeps/ieee754/ldbl-128ibm/strtold_l.c * sysdeps/ieee754/ldbl-64-128/strtold_l.c * sysdeps/ieee754/ldbl-opt/nldbl-compat.c * sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c * sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c * sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c * sysdeps/powerpc/powerpc32/power7/strcasecmp.S * sysdeps/powerpc/powerpc64/power7/strcasecmp.S * sysdeps/x86_64/strcasecmp_l-nonascii.c * sysdeps/x86_64/strncase_l-nonascii.c, time/strftime_l.c * time/strptime_l.c, time/time.h, wcsmbs/mbsrtowcs_l.c * wcsmbs/wchar.h, wcsmbs/wcscasecmp.c, wcsmbs/wcsncase.c * wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c * wcsmbs/wcstof_l.c, wcsmbs/wcstol_l.c, wcsmbs/wcstold.c * wcsmbs/wcstold_l.c, wcsmbs/wcstoll_l.c, wcsmbs/wcstoul_l.c * wcsmbs/wcstoull_l.c, wctype/iswctype_l.c * wctype/towctrans_l.c, wctype/wcfuncs_l.c * wctype/wctrans_l.c, wctype/wctype.h, wctype/wctype_l.c: Change all uses of __locale_t to locale_t.
* Rename xlocale.h to bits/types/__locale_t.h.Zack Weinberg2017-06-2036-112/+120
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xlocale.h is already a single-type micro-header, defining struct __locale_struct and the typedefs __locale_t and locale_t. This patch brings it into the bits/types/ scheme: there are now bits/types/__locale_t.h which defines only __locale_struct and __locale_t, and bits/types/locale_t.h which defines locale_t as well as the other two. None of *our* headers need __locale_t.h, but it appears to me that libstdc++ could make use of it. There are a lot of external uses of xlocale.h, but all the uses I checked had an autoconf test or equivalent for its existence. It has never been available from other C libraries, and it has always contained a comment reading "This file is not standardized, don't rely on it, it can go away without warning" so I think dropping it is pretty safe. I also took the opportunity to clean up comments in various public header files that still talk about the *_l interfaces as though they were completely nonstandard. There are a few of them, notably the strtoX_l and wcstoX_l families, that haven't been standardized, but the bulk are in POSIX.1-2008. * locale/xlocale.h: Rename to... * locale/bits/types/__locale_t.h: ...here. Adjust commentary. Only define struct __locale_struct and __locale_t, not locale_t. * locale/bits/types/locale_t.h: New file; define locale_t here. * locale/Makefile (headers): Update to match. * include/xlocale.h: Delete wrapper. * include/bits/types/__locale_t.h: New wrapper. * include/bits/types/locale_t.h: New wrapper. * ctype/ctype.h, include/printf.h, include/time.h * locale/langinfo.h, locale/locale.h, stdlib/monetary.h * stdlib/stdlib.h, string/string.h, string/strings.h, time/time.h * wcsmbs/wchar.h, wctype/wctype.h: Use bits/types/locale_t.h. Correct outdated comments regarding the standardization status of the functions that take locale_t arguments. * stdlib/strtod_l.c, stdlib/strtof_l.c, stdlib/strtol_l.c * stdlib/strtold_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c * sysdeps/ieee754/ldbl-128ibm/strtold_l.c * sysdeps/ieee754/ldbl-64-128/strtold_l.c * wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c * wcsmbs/wcstof_l.c, wcsmbs/wcstold.c, wcsmbs/wcstold_l.c: Don't include xlocale.h. If necessary, include locale.h instead. * stdlib/strtold_l.c: Unconditionally include wchar.h.
* Consolidate Linux openat implementationAdhemerval Zanella2017-06-205-38/+71
| | | | | | | | | | | | | | | | | | | | This patch consolidates the open Linux syscall implementation on sysdeps/unix/sysv/linux/open{64}.c. The changes are: 1. Remove wordsize-64 openat{64}. 2. For architetures that define __OFF_T_MATCHES_OFF64_T openat64 will be default one with alias to required symbols. Otherwise openat64 will pass the required O_LARGEFILE flag on syscall. Checked on i686-linux-gnu, x86_64-linux-gnu, x86_64-linux-gnux32, arch64-linux-gnu, arm-linux-gnueabihf, and powerpc64le-linux-gnu. * sysdeps/unix/sysv/linux/openat.c (__libc_openat): Build only for !__OFF_T_MATCHES_OFF64_T. * sysdeps/unix/sysv/linux/openat64.c (__libc_openat64): New implementation based on open64. * sysdeps/unix/sysv/linux/wordsize-64/openat.c: Remove file. * sysdeps/unix/sysv/linux/wordsize-64/openat64.c: Likewise.
* Move x86 specific tunables to x86/dl-tunables.listH.J. Lu2017-06-203-12/+39
| | | | | * elf/dl-tunables.list: Move x86 specific tunables to ... * sysdeps/x86/dl-tunables.list: Here. New file.
* conformtest: XFAIL uc_mcontext test for powerpc32 (bug 21635).Joseph Myers2017-06-204-3/+18
| | | | | | | | | | | | | | | This patch XFAILs one test where the powerpc32 ucontext_t has the wrong type of a field, to allow the conform/ tests as a whole to pass once the namespace issues are fixed. Tested with build-many-glibcs.py. [BZ #21635] * sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile [$(subdir) = conform] (conformtest-xfail-conds): New variable. * conform/data/signal.h-data (uc_mcontext): XFAIL for powerpc32-linux. * conform/data/ucontext.h-data (uc_mcontext): Likewise.
* conformtest: XFAIL uc_sigmask test for ia64 (bug 21634).Joseph Myers2017-06-204-3/+19
| | | | | | | | | | | | | | This patch XFAILs one test where the ia64 ucontext_t has the wrong type of a field, to allow the conform/ tests as a whole to pass once the namespace issues are fixed. Tested with build-many-glibcs.py. [BZ #21634] * sysdeps/unix/sysv/linux/ia64/Makefile [$(subdir) = conform] (conformtest-xfail-conds): New variable. * conform/data/signal.h-data (uc_sigmask): XFAIL for ia64-linux. * conform/data/ucontext.h-data (uc_sigmask): Likewise.