about summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
* aarch64: optimized memcpy implementation for thunderx2Anton Youdkevitch2018-10-163-18/+609
| | | | | | | | | | | | | | | | Since aligned loads and stores are huge performance advantage the implementation always tries to do aligned access. Among the cases when src and dst addresses are aligned or unaligned evenly there are cases of not evenly unaligned src and dst. For such cases (if the length is big enough) ext instruction is used to merge-and-shift two memory chunks loaded from two adjacent aligned locations and then the adjusted chunk gets stored to aligned address. Performance gain against the current T2 implementation: memcpy-large: 65K-32M: +40% - +10% memcpy-walk: 128-32M: +20% - +2%
* Use single bits/sem.h for all architectures.Joseph Myers2018-10-1514-460/+199
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bits/sem.h headers for architectures using the Linux kernel vary in a few ways: * x32 uses __syscall_ulong_t instead of unsigned long int. * The x86 header uses padding after time fields unconditionally (including for both x86_64 ABIs), not just for 32-bit time (unlike in msqid_ds where there is only padding for 32-bit time). Because this padding is present for x32, and is __syscall_ulong_t there, it does have to be __syscall_ulong_t, not unsigned long int. * The MIPS header never uses padding around time fields, even when 32-bit (unlike in msqid_ds where it has endian-dependent padding for 32-bit time). * Some older 32-bit big-endian architectures have padding before rather than after time fields, although the preferred generic approach is padding after the time fields independent of endianness. (There are also insubstantial differences such as use of unsigned int for padding instead of unsigned long int, which makes no difference to layout since the padding fields using unsigned int are only present on 32-bit architectures.) For the first, __syscall_ulong_t can be used in the generic version as it's the same as unsigned long int everywhere except x32. For the other differences, this patch adds macros __SEM_PAD_BEFORE_TIME and __SEM_PAD_AFTER_TIME in a new bits/sem-pad.h header, so that header is the only one needing to be provided on architectures with differences in this area, and everything else can go in a single common bits/sem.h header. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/sem-pad.h. * sysdeps/unix/sysv/linux/bits/sem.h: Include <bits/sem-pad.h> instead of <bits/wordsize.h>. (__SEM_PAD_TIME): New macro, depending on [__SEM_PAD_BEFORE_TIME] and [__SEM_PAD_AFTER_TIME]. (struct semid_ds): Define time fields using __SEM_PAD_TIME. Use __syscall_ulong_t instead of unsigned long int. * sysdeps/unix/sysv/linux/bits/sem-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/sem.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/sem.h: Likewise.
* regex: simplify by using intprops.hPaul Eggert2018-10-142-17/+7
| | | | | | | [BZ#23744] * posix/regex_internal.h [_LIBC]: Include intprops.h. (TYPE_SIGNED, INT_ADD_WRAPV) [_LIBC]: Remove. intprops.h defines them.
* regex: __builtin_expect → __glibc_unlikelyPaul Eggert2018-10-146-401/+437
| | | | | | | | | | | | | [BZ#23744] This refactoring was prompted by a problem when the regex code is used as part of Gnulib and when the builder’s compiler does not grok __builtin_expect. Problem reported for Gawk by Nelson H.F. Beebe in: https://lists.gnu.org/r/bug-gnulib/2018-09/msg00137.html Although this refactoring does not fix the problem directly, we might as well have Gawk use the now-preferred glibc style for when __builtin_expect is unavailable. * posix/regex_internal.h (BE): Remove. All uses replaced by __glibc_unlikely or __glibc_likely.
* Use single bits/msq.h for all architectures.Joseph Myers2018-10-1114-449/+213
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bits/msq.h headers for architectures using the Linux kernel vary in a few ways: * x32 uses __syscall_ulong_t instead of unsigned long int. * x32 has 64-bit time_t, so no padding around time fields despite __WORDSIZE == 32. * Some older 32-bit big-endian architectures have padding before rather than after time fields, although the preferred generic approach is padding after the time fields independent of endianness. (There are also insubstantial differences such as use of unsigned int for padding instead of unsigned long int, which makes no difference to layout since the padding fields using unsigned int are only present on 32-bit architectures.) For the first, __syscall_ulong_t can be used in the generic version as it's the same as unsigned long int everywhere except x32. For the other two differences, this patch adds macros __MSQ_PAD_BEFORE_TIME and __MSQ_PAD_AFTER_TIME in a new bits/msq-pad.h header, so that header is the only one needing to be provided on architectures with differences in this area, and everything else can go in a single common bits/msq.h header. Once we have __TIMESIZE, the generic bits/msq-pad.h can change to use that instead of __WORDSIZE, at which point the x86 version of bits/msq-pad.h won't be needed either. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/msq-pad.h. * sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/msq-pad.h> instead of <bits/wordsize.h>. (msgqnum_t): Define as __syscall_ulong_t. (msglen_t): Likewise. (__MSQ_PAD_TIME): New macro, depending on [__MSQ_PAD_BEFORE_TIME] and [__MSQ_PAD_AFTER_TIME]. (struct msqid_ds): Define time fields using __MSQ_PAD_TIME. Use __syscall_ulong_t instead of unsigned long int. * sysdeps/unix/sysv/linux/bits/msq-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq.h: Likewise.
* Use common bits/shm.h for more architectures.Joseph Myers2018-10-105-324/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysdeps/unix/sysv/linux/bits/shm.h has padding after time fields in struct shmid_ds unconditionally, and thus is only suitable for 32-bit architectures (no 64-bit configurations use this file); sysdeps/unix/sysv/linux/generic/bits/shm.h is substantively the same, except that the padding is conditioned on __WORDSIZE == 32, and so it can be used for 64-bit architectures as well. This patch adds the conditionals to sysdeps/unix/sysv/linux/bits/shm.h. The linux/generic/ version is then no longer needed and so is removed, as are the alpha and s390 versions which are also no longer needed. The other architecture-specific versions have different padding, layout, types or SHMLBA definitions and so are still needed after this change. This is essentially the same change for bits/shm.h as the bits/msq.h patch and the bits/sem.h patch. However, the details of the padding variations for the architectures that aren't changed are not all the same between msqid_ds, shmid_ds and semid_ds. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/shm.h: Include <bits/wordsize.h>. (struct shmid_ds): Condition padding after time fields on [__WORDSIZE == 32]. * sysdeps/unix/sysv/linux/alpha/bits/shm.h: Remove file. * sysdeps/unix/sysv/linux/generic/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/shm.h: Likewise.
* Use common bits/sem.h for more architectures.Joseph Myers2018-10-106-355/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysdeps/unix/sysv/linux/bits/sem.h has padding after time fields in struct semid_ds unconditionally, and thus is only suitable for 32-bit architectures (no 64-bit configurations use this file); sysdeps/unix/sysv/linux/generic/bits/sem.h is substantively the same, except that the padding is conditioned on __WORDSIZE == 32, and so it can be used for 64-bit architectures as well. This patch adds the conditionals to sysdeps/unix/sysv/linux/bits/sem.h. The linux/generic/ version is then no longer needed and so is removed, as are the alpha, ia64 and s390 versions which are also no longer needed. The other architecture-specific versions have different padding or types and so are still needed after this change. This is essentially the same change for bits/sem.h as the bits/msq.h patch. However, the details of the padding variations for the architectures that aren't changed are not all the same between msqid_ds and semid_ds. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/sem.h: Include <bits/wordsize.h>. (struct semid_ds): Condition padding after time fields on [__WORDSIZE == 32]. * sysdeps/unix/sysv/linux/alpha/bits/sem.h: Remove file. * sysdeps/unix/sysv/linux/generic/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/sem.h: Likewise.
* Use common bits/msq.h for more architectures.Joseph Myers2018-10-106-321/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | sysdeps/unix/sysv/linux/bits/msq.h has padding after time fields in struct msqid_ds unconditionally, and thus is only suitable for 32-bit architectures (no 64-bit configurations use this file); sysdeps/unix/sysv/linux/generic/bits/msq.h is substantively the same, except that the padding is conditioned on __WORDSIZE == 32, and so it can be used for 64-bit architectures as well. This patch adds the conditionals to sysdeps/unix/sysv/linux/bits/msq.h. The linux/generic/ version is then no longer needed and so is removed, as are the alpha, ia64 and s390 versions which are also no longer needed. The other architecture-specific versions have different padding or types and so are still needed after this change. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/wordsize.h>. (struct msqid_ds): Condition padding after time fields on [__WORDSIZE == 32]. * sysdeps/unix/sysv/linux/alpha/bits/msq.h: Remove file. * sysdeps/unix/sysv/linux/generic/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/msq.h: Likewise.
* Increase timeout of nss/tst-nss-files-hosts-multiSzabolcs Nagy2018-10-092-0/+5
| | | | | | | | | | | | | | | | | | | Increase timeout from the default 20s to 40s. This test makes close to 2 million syscalls with distribution: 1180249 connect 297952 getsockname 144040 lseek 143734 read 14466 close ... connect can be slow, so the default timeout was not enough on slow systems. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * nss/tst-nss-files-hosts-multi.c (TIMEOUT): Define.
* Increase timeout of libio/tst-readlineSzabolcs Nagy2018-10-092-0/+5
| | | | | | | | | | | | | | | | | | | | Increase timeout from the default 20s to 100s. This test makes close to 20 million syscalls with distribution: 12327675 read 4143204 lseek 929475 close 929471 openat 92817 fstat 1431 write ... The default timeout assumes each can finish in 1us on average which is not true on slow machines. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * libio/tst-readline.c (TIMEOUT): Define.
* mktime fix for Gnulib + coreutilsPaul Eggert2018-10-082-1/+13
| | | | | | | | | | | [BZ#23745] This fix affects only Gnulib. Problem discovered when mktime.c was used as part of Gnulib in bleeding-edge Coreutils. * time/mktime.c: (my_tzset) [!_LIBC && !NEED_MKTIME_WORKING && !NEED_MKTIME_WINDOWS]: Do not define since it is not used. Defining an unused static function prompts a warning from GCC when Coreutils is configured with --enable-gcc-warnings.
* benchtests: Set float type on --threshold argumentLeonardo Sandoval2018-10-082-1/+6
| | | | | | | | | | | Otherwise, we see the following runtime error when using the parameter: File "./glibc/benchtests/scripts/compare_bench.py", line 46, in do_compare if d > threshold: TypeError: '>' not supported between instances of 'float' and 'str' * benchtests/scripts/compare_bench.py (main): set float type on threshold argument.
* kl_GL: Update the month names and date formats (bug 23740).Rafal Luzynski2018-10-082-14/+34
| | | | | | | | | | | | | | Month names as provided by Oqaasileriffik, the official Greenlandic language regulator. They have recently reached the consensus regarding the orthography of the month names. Date formats updated to match the correct Greenlandic order which is MDY. [BZ #23740] * localedata/locales/kl_GL (mon): Update, the relative case. (alt_mon): Add, fill with month names in the nominative case. (d_t_fmt): Set to "%a %b %d %Y %T %Z". (d_fmt): Set to "%b %d %Y".
* Use bits/mman-linux.h for hppa.Joseph Myers2018-10-042-51/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hppa currently has a bits/mman.h that does not include bits/mman-linux.h, unlike all other architectures using the Linux kernel. This sort of variation between architectures is generally unhelpful when making global changes for new constants added to new Linux kernel releases. This patch changes hppa to use bits/mman-linux.h, overriding constants with different values as necessary (including with #undef after bits/mman.h inclusion when needed, as already done for alpha). While there could possibly be further improvements through e.g. splitting more sets of definitions into separate bits/ headers, I think this is still an improvement on the current state. diffstat shows 27 lines added, 51 deleted (and some of that is actually existing lines moving to a different place in the file). Tested with build-many-glibcs.py for hppa-linux-gnu. * sysdeps/unix/sysv/linux/hppa/bits/mman.h: Include <bits/mman-linux.h>. (PROT_READ): Don't define here. (PROT_WRITE): Likewise. (PROT_EXEC): Likewise. (PROT_NONE): Likewise. (PROT_GROWSDOWN): Likewise. (PROT_GROWSUP): Likewise. (MAP_SHARED): Likewise. (MAP_PRIVATE): Likewise. [__USE_MISC] (MAP_SHARED_VALIDATE): Likewise. [__USE_MISC] (MAP_FILE): Likewise. [__USE_MISC] (MAP_ANONYMOUS): Likewise. [__USE_MISC] (MAP_ANON): Likewise. [__USE_MISC] (MAP_HUGE_SHIFT): Likewise. [__USE_MISC] (MAP_HUGE_MASK): Likewise. (MCL_CURRENT): Likewise. (MCL_FUTURE): Likewise. (MCL_ONFAULT): Likewise. [__USE_MISC] (MADV_NORMAL): Likewise. [__USE_MISC] (MADV_RANDOM): Likewise. [__USE_MISC] (MADV_SEQUENTIAL): Likewise. [__USE_MISC] (MADV_WILLNEED): Likewise. [__USE_MISC] (MADV_DONTNEED): Likewise. [__USE_MISC] (MADV_FREE): Likewise. [__USE_MISC] (MADV_REMOVE): Likewise. [__USE_MISC] (MADV_DONTFORK): Likewise. [__USE_MISC] (MADV_DOFORK): Likewise. [__USE_MISC] (MADV_HWPOISON): Likewise. [__USE_XOPEN2K] (POSIX_MADV_NORMAL): Likewise. [__USE_XOPEN2K] (POSIX_MADV_RANDOM): Likewise. [__USE_XOPEN2K] (POSIX_MADV_SEQUENTIAL): Likewise. [__USE_XOPEN2K] (POSIX_MADV_WILLNEED): Likewise. [__USE_XOPEN2K] (POSIX_MADV_DONTNEED): Likewise. (__MAP_ANONYMOUS): New macro. [__USE_MISC] (MAP_TYPE): Undefine and redefine after <bits/mman-linux.h> inclusion. (MAP_FIXED): Likewise. (MS_SYNC): Likewise. (MS_ASYNC): Likewise. (MS_INVALIDATE): Likewise. [__USE_MISC] (MADV_MERGEABLE): Likewise. [__USE_MISC] (MADV_UNMERGEABLE): Likewise. [__USE_MISC] (MADV_HUGEPAGE): Likewise. [__USE_MISC] (MADV_NOHUGEPAGE): Likewise. [__USE_MISC] (MADV_DONTDUMP): Likewise. [__USE_MISC] (MADV_DODUMP): Likewise. [__USE_MISC] (MADV_WIPEONFORK): Likewise. [__USE_MISC] (MADV_KEEPONFORK): Likewise.
* Fix libnldbl_nonshared.a references to internal libm symbols (bug 23735).Joseph Myers2018-10-044-1/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The redirection of built-in functions such as sqrt in include/math.h applies when the wrappers for those functions in libnldbl_nonshared.a are built, resulting in references to internal names such as __ieee754_sqrt that aren't actually exported from the shared libm. (This applies for sqrt in 2.28, also for the round-to-integer functions in current master because of my changes there.) This patch arranges for NO_MATH_REDIRECT to be used for all the affected functions, and adds a test for those functions in libnldbl_nonshared.a. (We could of course choose to obsolete libnldbl_nonshared.a and require that people building with -mlong-double-64 either include the relevant headers and have a compiler supporting asm redirection, or have some other means of achieving that redirection at compile time if not including those headers. But while we have libnldbl_nonshared.a, it seems appropriate to fix such bugs in it.) Tested for powerpc, and with build-many-glibcs.py. [BZ #23735] * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (NO_MATH_REDIRECT): Define. * sysdeps/ieee754/ldbl-opt/test-nldbl-redirect.c: New file. * sysdeps/ieee754/ldbl-opt/Makefile [$(subdir) = math] (tests): Add test-nldbl-redirect. [$(subdir) = math] (CFLAGS-test-nldbl-redirect.c): New variable. [$(subdir) = math] ($(objpfx)test-nldbl-redirect): Depend on $(objpfx)libnldbl_nonshared.a.
* Adjust name of ld.so in test-container.c.Stefan Liebler2018-10-045-2/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | The test-container.c file assumes that ld.so is always named something like /elf/ld-linux-*. But e.g. on s390x it is named ld64.so.1 or ld.so.1 on s390. There are other architectures like power or mips with similar names. This patch introduces the new global variable support_objdir_elf_ldso which contains the absolute path to the runtime linker used by the testsuite, e.g. OBJDIR_PATH/elf/ld-linux-x86-64.so.2. The check in test-container.c is now comparing against this path. Without this patch, test-container.c is searching invalid files / directories and fails to find glibc/nss/tst-nss-test3.root/tst-nss-test3.script. Then the test tst-nss-test3 fails! Reviewed-by: Carlos O'Donell <carlos@redhat.com> ChangeLog: * support/support.h (support_objdir_elf_ldso): New variable. * support/support_paths.c (support_objdir_elf_ldso): Likewise. * support/Makefile (CFLAGS-support_paths.c): Add definition for OBJDIR_ELF_LDSO_PATH. * support/test-container.c (main): Search for the ld.so which is also used by the testsuite.
* kl_GL: Fix spelling of Sunday, should be "sapaat" (bug 20209).Rafal Luzynski2018-10-022-2/+10
| | | | | | | | | | | Although CLDR says otherwise, it is confirmed by Oqaasileriffik, the official Greenlandic language regulator, that this change is correct. [BZ #20209] * localedata/locales/kl_GL: (abday): Fix spelling of Sun (Sunday), should be "sap" rather than "sab". (day): Fix spelling of Sunday, should be "sapaat" rather than "sabaat".
* Add more fma tests.Joseph Myers2018-10-022-0/+197
| | | | | | | | | | | | | | | | | | In my review <https://sourceware.org/ml/libc-alpha/2018-06/msg00375.html> of a patch for bug 23584, I expressed concern that the proposed changes didn't deal with certain cases similar to the ones in the bug but where test coverage was missing. This patch adds such tests of fma (Inf, finite, finite) and fma (finite, Inf, finite) to libm-test-fma.inc. It does *not* do anything to fix the bug, simply adds test coverage to provide stronger evidence of whether any proposed revised fix does address the cases I was concerned with. Tested for x86_64 and x86. * math/libm-test-fma.inc (fma_test_data): Add more tests.
* sysdeps/ieee754/soft-fp: ignore maybe-uninitialized with -O [BZ #19444]Martin Jansa2018-10-022-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * with -O, -O1, -Os it fails with: In file included from ../soft-fp/soft-fp.h:318, from ../sysdeps/ieee754/soft-fp/s_fdiv.c:28: ../sysdeps/ieee754/soft-fp/s_fdiv.c: In function '__fdiv': ../soft-fp/op-2.h:98:25: error: 'R_f1' may be used uninitialized in this function [-Werror=maybe-uninitialized] X##_f0 = (X##_f1 << (_FP_W_TYPE_SIZE - (N)) | X##_f0 >> (N) \ ^~ ../sysdeps/ieee754/soft-fp/s_fdiv.c:38:14: note: 'R_f1' was declared here FP_DECL_D (R); ^ ../soft-fp/op-2.h:37:36: note: in definition of macro '_FP_FRAC_DECL_2' _FP_W_TYPE X##_f0 _FP_ZERO_INIT, X##_f1 _FP_ZERO_INIT ^ ../soft-fp/double.h:95:24: note: in expansion of macro '_FP_DECL' # define FP_DECL_D(X) _FP_DECL (2, X) ^~~~~~~~ ../sysdeps/ieee754/soft-fp/s_fdiv.c:38:3: note: in expansion of macro 'FP_DECL_D' FP_DECL_D (R); ^~~~~~~~~ ../soft-fp/op-2.h:101:17: error: 'R_f0' may be used uninitialized in this function [-Werror=maybe-uninitialized] : (X##_f0 << (_FP_W_TYPE_SIZE - (N))) != 0)); \ ^~ ../sysdeps/ieee754/soft-fp/s_fdiv.c:38:14: note: 'R_f0' was declared here FP_DECL_D (R); ^ ../soft-fp/op-2.h:37:14: note: in definition of macro '_FP_FRAC_DECL_2' _FP_W_TYPE X##_f0 _FP_ZERO_INIT, X##_f1 _FP_ZERO_INIT ^ ../soft-fp/double.h:95:24: note: in expansion of macro '_FP_DECL' # define FP_DECL_D(X) _FP_DECL (2, X) ^~~~~~~~ ../sysdeps/ieee754/soft-fp/s_fdiv.c:38:3: note: in expansion of macro 'FP_DECL_D' FP_DECL_D (R); ^~~~~~~~~ Build tested with Yocto for ARM, AARCH64, X86, X86_64, PPC, MIPS, MIPS64 with -O, -O1, -Os. For AARCH64 it needs one more fix in locale for -Os. [BZ #19444] * sysdeps/ieee754/soft-fp/s_fdiv.c: Include <libc-diag.h> and use DIAG_PUSH_NEEDS_COMMENT, DIAG_IGNORE_NEEDS_COMMENT and DIAG_POP_NEEDS_COMMENT to disable -Wmaybe-uninitialized.
* Fix build from commit 0b727edAdhemerval Zanella2018-10-022-0/+6
| | | | * sysdeps/unix/sysv/linux/fd_to_filename.h: Add missing includes.
* x86: Use RTM intrinsics in pthread mutex lock elisionH.J. Lu2018-10-023-67/+16
| | | | | | | | | | | | Since RTM intrinsics are supported in GCC 4.9, we can use them in pthread mutex lock elision. * sysdeps/unix/sysv/linux/x86/Makefile (CFLAGS-elision-lock.c): Add -mrtm. (CFLAGS-elision-unlock.c): Likewise. (CFLAGS-elision-timed.c): Likewise. (CFLAGS-elision-trylock.c): Likewise. * sysdeps/unix/sysv/linux/x86/hle.h: Rewritten.
* libio: Flush stream at freopen (BZ#21037)Adhemerval Zanella2018-10-029-49/+214
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As POSIX states [1] a freopen call should first flush the stream as if by a call fflush. C99 (n1256) and C11 (n1570) only states the function should first close any file associated with the specific stream. Although current implementation only follow C specification, current BSD and other libc implementation (musl) are in sync with POSIX and fflush the stream. This patch change freopen{64} to fflush the stream before actually reopening it (or returning if the stream does not support reopen). It also changes the Linux implementation to avoid a dynamic allocation on 'fd_to_filename'. Checked on x86_64-linux-gnu. [BZ #21037] * libio/Makefile (tests): Add tst-memstream4 and tst-wmemstream4. * libio/freopen.c (freopen): Sync stream before reopen and adjust to new fd_to_filename interface. * libio/freopen64.c (freopen64): Likewise. * libio/tst-memstream.h: New file. * libio/tst-memstream4.c: Likewise. * libio/tst-wmemstream4.c: Likewise. * sysdeps/generic/fd_to_filename.h (fd_to_filename): Change signature. * sysdeps/unix/sysv/linux/fd_to_filename.h (fd_to_filename): Likewise and remove internal dynamic allocation. [1] http://pubs.opengroup.org/onlinepubs/9699919799/
* Move MREMAP_* to bits/mman-shared.h.Joseph Myers2018-10-014-12/+16
| | | | | | | | | | | | | | | | | | The MREMAP_* flags are identical between bits/mman-linux.h and the hppa bits/mman.h; thus, they should be in bits/mman-shared.h instead to avoid unnecessary duplication. This patch moves them there. Tested for x86_64, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/mman-linux.h [__USE_GNU] (MREMAP_MAYMOVE): Do not define here. [__USE_GNU] (MREMAP_FIXED): Likewise. * sysdeps/unix/sysv/linux/bits/mman-shared.h [__USE_GNU] (MREMAP_MAYMOVE): Define here instead. [__USE_GNU] (MREMAP_FIXED): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_GNU] (MREMAP_MAYMOVE): Remove. [__USE_GNU] (MREMAP_FIXED): Likewise.
* Remove unnecessary math_private.h includes.Joseph Myers2018-09-2887-86/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After my changes to move various macros, inlines and other content from math_private.h to more specific headers, many files including math_private.h no longer need to do so. Furthermore, since the optimized inlines of various functions have been moved to include/fenv.h or replaced by use of function names GCC inlines automatically, a missing math_private.h include where one is appropriate will reliably cause a build failure rather than possibly causing code to be less well optimized while still building successfully. Thus, this patch removes includes of math_private.h that are now unnecessary. In the case of two RISC-V files, the include is replaced by one of stdbool.h because the files in question were relying on math_private.h to get a definition of bool. Tested for x86_64 and x86, and with build-many-glibcs.py. * math/fromfp.h: Do not include <math_private.h>. * math/s_cacosh_template.c: Likewise. * math/s_casin_template.c: Likewise. * math/s_casinh_template.c: Likewise. * math/s_ccos_template.c: Likewise. * math/s_cproj_template.c: Likewise. * math/s_fdim_template.c: Likewise. * math/s_fmaxmag_template.c: Likewise. * math/s_fminmag_template.c: Likewise. * math/s_iseqsig_template.c: Likewise. * math/s_ldexp_template.c: Likewise. * math/s_nextdown_template.c: Likewise. * math/w_log1p_template.c: Likewise. * math/w_scalbln_template.c: Likewise. * sysdeps/aarch64/fpu/feholdexcpt.c: Likewise. * sysdeps/aarch64/fpu/fesetround.c: Likewise. * sysdeps/aarch64/fpu/fgetexcptflg.c: Likewise. * sysdeps/aarch64/fpu/ftestexcept.c: Likewise. * sysdeps/aarch64/fpu/s_llrint.c: Likewise. * sysdeps/aarch64/fpu/s_llrintf.c: Likewise. * sysdeps/aarch64/fpu/s_lrint.c: Likewise. * sysdeps/aarch64/fpu/s_lrintf.c: Likewise. * sysdeps/i386/fpu/s_atanl.c: Likewise. * sysdeps/i386/fpu/s_f32xaddf64.c: Likewise. * sysdeps/i386/fpu/s_f32xsubf64.c: Likewise. * sysdeps/i386/fpu/s_fdim.c: Likewise. * sysdeps/i386/fpu/s_logbl.c: Likewise. * sysdeps/i386/fpu/s_rintl.c: Likewise. * sysdeps/i386/fpu/s_significandl.c: Likewise. * sysdeps/ia64/fpu/s_matherrf.c: Likewise. * sysdeps/ia64/fpu/s_matherrl.c: Likewise. * sysdeps/ieee754/dbl-64/s_atan.c: Likewise. * sysdeps/ieee754/dbl-64/s_cbrt.c: Likewise. * sysdeps/ieee754/dbl-64/s_fma.c: Likewise. * sysdeps/ieee754/dbl-64/s_fmaf.c: Likewise. * sysdeps/ieee754/flt-32/s_cbrtf.c: Likewise. * sysdeps/ieee754/k_standardf.c: Likewise. * sysdeps/ieee754/k_standardl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_copysignl.c: Likewise. * sysdeps/ieee754/ldbl-64-128/s_finitel.c: Likewise. * sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c: Likewise. * sysdeps/ieee754/ldbl-64-128/s_isinfl.c: Likewise. * sysdeps/ieee754/ldbl-64-128/s_isnanl.c: Likewise. * sysdeps/ieee754/ldbl-64-128/s_signbitl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_cbrtl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fma.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fmal.c: Likewise. * sysdeps/ieee754/s_signgam.c: Likewise. * sysdeps/powerpc/power5+/fpu/s_modf.c: Likewise. * sysdeps/powerpc/power5+/fpu/s_modff.c: Likewise. * sysdeps/powerpc/power7/fpu/s_logbf.c: Likewise. * sysdeps/riscv/rv64/rvd/s_ceil.c: Likewise. * sysdeps/riscv/rv64/rvd/s_floor.c: Likewise. * sysdeps/riscv/rv64/rvd/s_nearbyint.c: Likewise. * sysdeps/riscv/rv64/rvd/s_round.c: Likewise. * sysdeps/riscv/rv64/rvd/s_roundeven.c: Likewise. * sysdeps/riscv/rv64/rvd/s_trunc.c: Likewise. * sysdeps/riscv/rvd/s_finite.c: Likewise. * sysdeps/riscv/rvd/s_fmax.c: Likewise. * sysdeps/riscv/rvd/s_fmin.c: Likewise. * sysdeps/riscv/rvd/s_fpclassify.c: Likewise. * sysdeps/riscv/rvd/s_isinf.c: Likewise. * sysdeps/riscv/rvd/s_isnan.c: Likewise. * sysdeps/riscv/rvd/s_issignaling.c: Likewise. * sysdeps/riscv/rvf/fegetround.c: Likewise. * sysdeps/riscv/rvf/feholdexcpt.c: Likewise. * sysdeps/riscv/rvf/fesetenv.c: Likewise. * sysdeps/riscv/rvf/fesetround.c: Likewise. * sysdeps/riscv/rvf/feupdateenv.c: Likewise. * sysdeps/riscv/rvf/fgetexcptflg.c: Likewise. * sysdeps/riscv/rvf/ftestexcept.c: Likewise. * sysdeps/riscv/rvf/s_ceilf.c: Likewise. * sysdeps/riscv/rvf/s_finitef.c: Likewise. * sysdeps/riscv/rvf/s_floorf.c: Likewise. * sysdeps/riscv/rvf/s_fmaxf.c: Likewise. * sysdeps/riscv/rvf/s_fminf.c: Likewise. * sysdeps/riscv/rvf/s_fpclassifyf.c: Likewise. * sysdeps/riscv/rvf/s_isinff.c: Likewise. * sysdeps/riscv/rvf/s_isnanf.c: Likewise. * sysdeps/riscv/rvf/s_issignalingf.c: Likewise. * sysdeps/riscv/rvf/s_nearbyintf.c: Likewise. * sysdeps/riscv/rvf/s_roundevenf.c: Likewise. * sysdeps/riscv/rvf/s_roundf.c: Likewise. * sysdeps/riscv/rvf/s_truncf.c: Likewise. * sysdeps/riscv/rv64/rvd/s_rint.c: Include <stdbool.h> instead of <math_private.h>. * sysdeps/riscv/rvf/s_rintf.c: Likewise.
* i386: Use _dl_runtime_[resolve|profile]_shstk for SHSTK [BZ #23716]H.J. Lu2018-09-283-69/+21
| | | | | | | | | | | | | | | | | | | When elf_machine_runtime_setup is called to set up resolver, it should use _dl_runtime_resolve_shstk or _dl_runtime_profile_shstk if SHSTK is enabled by kernel. Tested on i686 with and without --enable-cet as well as on CET emulator with --enable-cet. [BZ #23716] * sysdeps/i386/dl-cet.c: Removed. * sysdeps/i386/dl-machine.h (_dl_runtime_resolve_shstk): New prototype. (_dl_runtime_profile_shstk): Likewise. (elf_machine_runtime_setup): Use _dl_runtime_profile_shstk or _dl_runtime_resolve_shstk if SHSTK is enabled by kernel. Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
* Fix misreported errno on preadv2/pwritev2 (BZ#23579)Adhemerval Zanella2018-09-288-7/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The fallback code of Linux wrapper for preadv2/pwritev2 executes regardless of the errno code for preadv2, instead of the case where the syscall is not supported. This fixes it by calling the fallback code iff errno is ENOSYS. The patch also adds tests for both invalid file descriptor and invalid iov_len and vector count. The only discrepancy between preadv2 and fallback code regarding error reporting is when an invalid flags are used. The fallback code bails out earlier with ENOTSUP instead of EINVAL/EBADF when the syscall is used. Checked on x86_64-linux-gnu on a 4.4.0 and 4.15.0 kernel. [BZ #23579] * misc/tst-preadvwritev2-common.c (do_test_with_invalid_fd): New test. * misc/tst-preadvwritev2.c, misc/tst-preadvwritev64v2.c (do_test): Call do_test_with_invalid_fd. * sysdeps/unix/sysv/linux/preadv2.c (preadv2): Use fallback code iff errno is ENOSYS. * sysdeps/unix/sysv/linux/preadv64v2.c (preadv64v2): Likewise. * sysdeps/unix/sysv/linux/pwritev2.c (pwritev2): Likewise. * sysdeps/unix/sysv/linux/pwritev64v2.c (pwritev64v2): Likewise.
* Use copysign functions not __copysign functions in glibc libm.Joseph Myers2018-09-2757-110/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the move to use, within libm, public names for libm functions that can be inlined as built-in functions on many architectures, this patch moves calls to __copysign functions to call the corresponding copysign names instead, with asm redirection to __copysign when the calls are not inlined (all cases are inlined except for IBM long double for powerpc soft-float / e500v1). This eliminates the need for an inline function defining __copysign in terms of __builtin_copysign. Tested for x86_64, and with build-many-glibcs.py. * include/math.h [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (MATH_REDIRECT_BINARY_ARGS): New macro. [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (copysign): Redirect using MATH_REDIRECT. * sysdeps/alpha/fpu/s_copysign.c: Define NO_MATH_REDIRECT before header inclusion. * sysdeps/alpha/fpu/s_copysignf.c: Likewise. * sysdeps/ieee754/dbl-64/s_copysign.c: Likewise. * sysdeps/ieee754/float128/s_copysignf128.c: Likewise. * sysdeps/ieee754/flt-32/s_copysignf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_copysignl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_copysignl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_copysignl.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysignf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysignf.c: Likewise. * sysdeps/riscv/rvd/s_copysign.c: Likewise. * sysdeps/riscv/rvf/s_copysignf.c: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.c: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.c: Likewise. * sysdeps/generic/math_private_calls.h [!__MATH_DECLARING_LONG_DOUBLE || !NO_LONG_DOUBLE] (__copysign): Do not declare and define as an inline function. * math/divtc3.c (__divtc3): Use copysign functions instead of __copysign variants. * math/multc3.c (__multc3): Likewise. * sysdeps/generic/math-type-macros.h (M_COPYSIGN): Likewise. * sysdeps/ieee754/dbl-64/e_atan2.c (signArctan2): Likewise. * sysdeps/ieee754/dbl-64/e_atanh.c (__ieee754_atanh): Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Likewise. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. (__ieee754_yn): Likewise. * sysdeps/ieee754/dbl-64/s_asinh.c (__asinh): Likewise. * sysdeps/ieee754/dbl-64/s_atan.c (__signArctan): Likewise. * sysdeps/ieee754/dbl-64/s_scalbln.c (__scalbln): Likewise. * sysdeps/ieee754/dbl-64/s_scalbn.c (__scalbn): Likewise. * sysdeps/ieee754/dbl-64/s_sin.c (do_sin): Likewise. (__sin): Likewise. * sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_nearbyint.c (__nearbyint): Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_scalbln.c (__scalbln): Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_scalbn.c (__scalbn): Likewise. * sysdeps/ieee754/flt-32/e_atanhf.c (__ieee754_atanhf): Likewise. * sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise. (__ieee754_ynf): Likewise. * sysdeps/ieee754/flt-32/s_asinhf.c (__asinhf): Likewise. * sysdeps/ieee754/flt-32/s_scalbnf.c (__scalbnf): Likewise. * sysdeps/ieee754/k_standard.c (__kernel_standard): Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl): Likewise. * sysdeps/ieee754/ldbl-128/s_scalblnl.c (__scalblnl): Likewise. * sysdeps/ieee754/ldbl-128/s_scalbnl.c (__scalbnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fmal.c (__fmal): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_scalblnl.c (__scalblnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c (__scalbnl): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl) * sysdeps/ieee754/ldbl-96/s_asinhl.c (__asinhl): Likewise. * sysdeps/ieee754/ldbl-96/s_scalblnl.c (__scalblnl): Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-copysign.c (copysignl): Likewise. * sysdeps/powerpc/power5+/fpu/s_modf.c (__modf): Likewise. * sysdeps/powerpc/power5+/fpu/s_modff.c (__modff): Likewise.
* Use round functions not __round functions in glibc libm.Joseph Myers2018-09-2725-35/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the move to use, within libm, public names for libm functions that can be inlined as built-in functions on many architectures, this patch moves calls to __round functions to call the corresponding round names instead, with asm redirection to __round when the calls are not inlined. An additional complication arises in sysdeps/ieee754/ldbl-128ibm/e_expl.c, where a call to roundl, with the result converted to int, gets converted by the compiler to call lroundl in the case of 32-bit long, so resulting in localplt test failures. It's logically correct to let the compiler make such an optimization; an appropriate asm redirection of lroundl to __lroundl is thus added to that file (it's not needed anywhere else). Tested for x86_64, and with build-many-glibcs.py. * include/math.h [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (round): Redirect using MATH_REDIRECT. * sysdeps/aarch64/fpu/s_round.c: Define NO_MATH_REDIRECT before header inclusion. * sysdeps/aarch64/fpu/s_roundf.c: Likewise. * sysdeps/ieee754/dbl-64/s_round.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_round.c: Likewise. * sysdeps/ieee754/float128/s_roundf128.c: Likewise. * sysdeps/ieee754/flt-32/s_roundf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_roundl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_roundl.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_round.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_roundf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_round.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_roundf.c: Likewise. * sysdeps/riscv/rv64/rvd/s_round.c: Likewise. * sysdeps/riscv/rvf/s_roundf.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_roundl.c: Likewise. (round): Redirect to __round. (__roundl): Call round instead of __round. * sysdeps/powerpc/fpu/math_private.h [_ARCH_PWR5X] (__round): Remove macro. [_ARCH_PWR5X] (__roundf): Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Use round functions instead of __round variants. * sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (gammal_positive): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (gammal_positive): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (gammal_positive): Likewise. * sysdeps/x86/fpu/powl_helper.c (__powl_helper): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_expl.c (lroundl): Redirect to __lroundl. (__ieee754_expl): Call roundl instead of __roundl.
* Fix stack overflow in tst-setcontext9 (bug 23717)Andreas Schwab2018-09-272-2/+8
| | | | | | The function f1a, executed on a stack of size 32k, allocates an object of size 32k on the stack. Make the stack variables static to reduce excessive stack usage.
* Add missing unwind information to ld.so on powerpc32 (bug 23707)Andreas Schwab2018-09-265-2/+86
|
* Share MAP_* flags between more architectures.Joseph Myers2018-09-266-46/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing bits/mman.h unification between architectures using the Linux kernel, this patch arranges for the common set of MAP_* flags to be used by two more architectures. That common set is moved to bits/mman-map-flags-generic.h, which is included by bits/mman.h, to allow architectures to use that common set even if they also have architecture-specific additions to it. As well as the generic bits/mman.h, the versions for x86 and ia64 are also then made to include bits/mman-map-flags-generic.h, so while they still need architecture-specific bits/mman.h (for MAP_32BIT and MAP_GROWSUP respectively), they do not need to duplicate the generic flag definitions in there. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/mman-map-flags-generic.h: New file. Most contents moved from .... * sysdeps/unix/sysv/linux/bits/mman.h: ... here. Move contents to and include <bits/mman-map-flags-generic.h>. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_headers): Add bits/mman-map-flags-generic.h. * sysdeps/unix/sysv/linux/ia64/bits/mman.h: Include <bits/mman-map-flags-generic.h>. [__USE_MISC] (MAP_GROWSUP): Only define this macro, not other macros defined in <bits/mman-map-flags-generic.h>. * sysdeps/unix/sysv/linux/x86/bits/mman.h: Include <bits/mman-map-flags-generic.h>. [__USE_MISC] (MAP_32BIT): Only define this macro, not other macros defined in <bits/mman-map-flags-generic.h>.
* Remove leading space from testrun.shAndreas Schwab2018-09-262-1/+6
|
* Fix ifunc support with DT_TEXTREL segments (BZ#20480)Adhemerval Zanella2018-09-257-12/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, DT_TEXTREL is incompatible with IFUNC. When DT_TEXTREL or DF_TEXTREL is seen, the dynamic linker calls __mprotect on the segments with PROT_READ|PROT_WRITE before applying dynamic relocations. It leads to segfault when performing IFUNC resolution (which requires PROT_EXEC as well for the IFUNC resolver). This patch makes it call __mprotect with extra PROT_WRITE bit, which will keep the PROT_EXEC bit if exists, and thus fixes the segfault. FreeBSD rtld libexec/rtld-elf/rtld.c (reloc_textrel_prot) does the same. Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, sparc64-linux-gnu, sparcv9-linux-gnu, and armv8-linux-gnueabihf. Adam J. Richte <adam_richter2004@yahoo.com> Adhemerval Zanella <adhemerval.zanella@linaro.org> Fangrui Song <maskray@google.com> [BZ #20480] * config.h.in (CAN_TEXTREL_IFUNC): New define. * configure.ac: Add check if linker supports textrel relocation with ifunc. * elf/dl-reloc.c (_dl_relocate_object): Use all required flags on DT_TEXTREL segments, not only PROT_READ and PROT_WRITE. * elf/Makefile (ifunc-pie-tests): Add tst-ifunc-textrel. (CFLAGS-tst-ifunc-textrel.c): New rule. * elf/tst-ifunc-textrel.c: New file.
* Complete sys/procfs.h unification.Joseph Myers2018-09-257-130/+105
| | | | | | | | | | | | | | | | | | | | | | | | | This patch completes the process of unifying sys/procfs.h headers for architectures using the Linux kernel by making alpha use the generic version. That was previously deferred because alpha has different definitions of prgregset_t and prfpregset_t from other architectures, so changing to the common definitions would change C++ name mangling. To avoid such a change, a header bits/procfs-prregset.h is added, and alpha gets its own version of that header. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/sys/procfs.h: Include <bits/procfs-prregset.h>. (prgregset_t): Define using __prgregset_t. (prfpregset_t): Define using __prfpregset_t. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_headers): Add bits/procfs-prregset.h. * sysdeps/unix/sysv/linux/bits/procfs-prregset.h: New file. * sysdeps/unix/sysv/linux/alpha/bits/procfs-prregset.h: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sys/procfs.h: Remove file.
* Unify more sys/procfs.h headers.Joseph Myers2018-09-2525-892/+648
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues the process of unifying sys/procfs.h headers for architectures using the Linux kernel. A bits/procfs-id.h header is added to define __pr_uid_t and __pr_gid_t for the types of pr_uid and pr_gid; the default version of this header uses unsigned int. On some architectures, sys/procfs.h has copies of 32-bit structures for 64-bit builds; those move into a bits/procfs-extra.h header (they can't go in bits/procfs.h because they have to come *after* other declarations from sys/procfs.h). Given appropriate versions of these headers, six more architectures can then move to providing only bits/procfs*.h without duplicating the rest of the contents of sys/procfs.h. Only alpha needs a further bits/ header to be added before it can stop having its own sys/procfs.h. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/sys/procfs.h: Include <bits/procfs-id.h> and <bits/procfs-extra.h>. (struct elf_prpsinfo): Use __pr_uid_t and __pr_gid_t as types of pr_uid and pr_gid. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_headers): Add bits/procfs-id.h and bits/procfs-extra.h. * sysdeps/unix/sysv/linux/bits/procfs-extra.h: New file. * sysdeps/unix/sysv/linux/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/arm/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/arm/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/m68k/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/m68k/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/procfs-extra.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/procfs-extra.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/arm/sys/procfs.h: Remove file. * sysdeps/unix/sysv/linux/m68k/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/s390/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/sh/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/x86/sys/procfs.h: Likewise.
* Unify some sys/procfs.h headers.Joseph Myers2018-09-2520-1015/+347
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per recent discussions, this patch unifies some of the sys/procfs.h headers for architectures using the Linux kernel, producing a generic version that can hopefully be used by all new architectures as well. The new generic version is based on the AArch64 one. The register definitions, the only part that generally needs to vary by architecture, go in a new bits/procfs.h header (which each architecture using the generic version needs to provide); that header also has any #includes that were in the architecture-specific sys/procfs.h, where those includes went beyond the generic set. The generic version is used for eight architectures where the generic definitions were the same as the architecture-specific ones. (Some of those architectures had #if 0 fields, now removed; some defined types or fields using different type names which were typedefs for the same underlying types.) Six of the remaining architectures with their own sys/procfs.h use unsigned short for pr_uid / pr_gid in some cases; moving those to the generic header will require a bits/ header to define a typedef for the type of those fields. In the case of alpha, the generic sys/procfs.h uses elf_gregset_t (= unsigned long int[33]) to define prgregset_t and elf_fpregset_t (= double[32]) to define prfpregset_t, but the alpha version uses gregset_t (= long int[33]) and fpregset_t (= long int[32]), so avoiding unnecessarily changing the underlying types (and thus C++ name mangling) again means a bits/ header will need to be able to define a different choice for those typedefs. bits/procfs.h is included outside the __BEGIN_DECLS / __END_DECLS pair (whereas the definitions it contains were previously inside that pair in various sys/procfs.h headers), because it sometimes includes other headers and putting those other #includes inside that pair seems risky. Because none of the declarations in bits/procfs.h are of functions or variables or involve function types, I don't think it makes any difference whether they are inside or outside an extern "C" context. Tested with build-many-glibcs.py (again, that does not provide much validation for the correctness of this patch). * sysdeps/unix/sysv/linux/sys/procfs.h: Replace with file based on AArch64 version. Include <bits/procfs.h>. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_headers): Add bits/procfs.h. * sysdeps/unix/sysv/linux/bits/procfs.h: New file. * sysdeps/unix/sysv/linux/aarch64/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/nios2/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/riscv/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/procfs.h: Remove file. * sysdeps/unix/sysv/linux/hppa/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/mips/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/riscv/sys/procfs.h: Likewise.
* Use libsupport for tst-spawn.cAdhemerval Zanella2018-09-252-122/+97
| | | | | | | No function changes is done. Checked on x86_64-linux-gnu. * posix/tst-spawn.c (do_prepare, handle_restart, do_test): Use libsupport.
* Clean up iconv/gconv_int.h for unnecessary declarationsArjun Shankar2018-09-254-22/+24
| | | | | | | | | | | | The variables __gconv_path_elem, __gconv_max_path_elem_len and function __gconv_get_path declared in, as well as the type path_elem and macro GCONV_NCHAR_GOAL defined in gconv_int.h are all used in only one iconv compilation unit each. In addition, the extern declaration of the variable __gconv_nmodules refers to a variable that does not exist any more. Considering this, these symbols do not need to be exposed via a header file. This patch removes the extern declarations from the header file and moves the definitions to the compilation units where they are used.
* Don't build libnsl for new ABIsAndreas Schwab2018-09-247-51/+113
| | | | | | For architectures and ABIs that are added in version 2.29 or later the option --enable-obsolete-nsl is no longer available, and no libnsl compatibility library is built.
* powerpc: Only enable TLE with PPC_FEATURE2_HTM_NOSCAdhemerval Zanella2018-09-2112-100/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux from 3.9 through 4.2 does not abort HTM transaction on syscalls, instead it suspend and resume it when leaving the kernel. The side-effects of the syscall will always remain visible, even if the transaction is aborted. This is an issue when transaction is used along with futex syscall, on pthread_cond_wait for instance, where the futex call might succeed but the transaction is rolled back leading the pthread_cond object in an inconsistent state. Glibc used to prevent it by always aborting a transaction before issuing a syscall. Linux 4.2 also decided to abort active transaction in syscalls which makes the glibc workaround superfluous. Worse, glibc transaction abortion leads to a performance issue on recent kernels where the HTM state is saved/restore lazily (v4.9). By aborting a transaction on every syscalls, regardless whether a transaction has being initiated before, GLIBS makes the kernel always save/restore HTM state (it can not even lazily disable it after a certain number of syscall iterations). Because of this shortcoming, Transactional Lock Elision is just enabled when it has been explicitly set (either by tunables of by a configure switch) and if kernel aborts HTM transactions on syscalls (PPC_FEATURE2_HTM_NOSC). It is reported that using simple benchmark [1], the context-switch is about 5% faster by not issuing a tabort in every syscall in newer kernels. Checked on powerpc64le-linux-gnu with 4.4.0 kernel (Ubuntu 16.04). * NEWS: Add note about new TLE support on powerpc64le. * sysdeps/powerpc/nptl/tcb-offsets.sym (TM_CAPABLE): Remove. * sysdeps/powerpc/nptl/tls.h (tcbhead_t): Rename tm_capable to __ununsed1. (TLS_INIT_TP, TLS_DEFINE_INIT_TP): Remove tm_capable setup. (THREAD_GET_TM_CAPABLE, THREAD_SET_TM_CAPABLE): Remove macros. * sysdeps/powerpc/powerpc32/sysdep.h, sysdeps/powerpc/powerpc64/sysdep.h (ABORT_TRANSACTION_IMPL, ABORT_TRANSACTION): Remove macros. * sysdeps/powerpc/sysdep.h (ABORT_TRANSACTION): Likewise. * sysdeps/unix/sysv/linux/powerpc/elision-conf.c (elision_init): Set __pthread_force_elision iff PPC_FEATURE2_HTM_NOSC is set. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h, sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h sysdeps/unix/sysv/linux/powerpc/syscall.S (ABORT_TRANSACTION): Remove usage. * sysdeps/unix/sysv/linux/powerpc/not-errno.h: Remove file. Reported-by: Breno Leitão <leitao@debian.org>
* it_CH/it_IT locales: Correct some LC_TIME formats (bug 10425).Rafal Luzynski2018-09-213-5/+15
| | | | | | | | | | | | Synchronize some values with CLDR and apply some suggestions from Bugzilla. [BZ #10425] * localedata/locales/it_IT (d_t_fmt): Use "%a %-d %b %Y, %T". (date_fmt): Use "%a %-d %b %Y, %T, %Z". * localedata/locales/it_CH (d_t_fmt): Use "%a %-d %b %Y, %T" which is the same as in it_IT. (d_fmt): Use "%d.%m.%Y" which is the same as in de_CH. (date_fmt): Use "%a %-d %b %Y, %T, %Z" which is the same as in it_IT.
* Use trunc functions not __trunc functions in glibc libm.Joseph Myers2018-09-2027-31/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the move to use, within libm, public names for libm functions that can be inlined as built-in functions on many architectures, this patch moves calls to __trunc functions to call the corresponding trunc names instead, with asm redirection to __trunc when the calls are not inlined. Tested for x86_64, and with build-many-glibcs.py. * include/math.h [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (trunc): Redirect using MATH_REDIRECT. * sysdeps/aarch64/fpu/s_trunc.c: Define NO_MATH_REDIRECT before header inclusion. * sysdeps/aarch64/fpu/s_truncf.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_trunc.c: Likewise. * sysdeps/ieee754/float128/s_truncf128.c: Likewise. * sysdeps/ieee754/dbl-64/s_trunc.c: Likewise. * sysdeps/ieee754/flt-32/s_truncf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_truncl.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_trunc.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_truncf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_trunc.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_truncf.c: Likewise. * sysdeps/riscv/rv64/rvd/s_trunc.c: Likewise. * sysdeps/riscv/rvf/s_truncf.c: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Likewise. * sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_trunc.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_truncf.c: Likewise. * sysdeps/m68k/m680x0/fpu/s_trunc_template.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_truncl.c: Likewise. (ceil): Redirect to __ceil. (floor): Redirect to __floor. (trunc): Redirect to __trunc. (__truncl): Call trunc instead of __trunc. * sysdeps/powerpc/fpu/math_private.h [_ARCH_PWR5X] (__trunc): Remove macro. [_ARCH_PWR5X] (__truncf): Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Use trunc functions instead of __trunc variants. * sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r): Likewise.
* Invert sense of list of i686-class processors in sysdeps/x86/cpu-features.h.Joseph Myers2018-09-202-18/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed that sysdeps/x86/cpu-features.h had conditionals on whether to define HAS_CPUID, HAS_I586 and HAS_I686 with a long list of preprocessor macros for i686-and-later processors which however was out of date. This patch avoids the problem of the list getting out of date by instead having conditionals on all the (few, old) pre-i686 processors for which GCC has preprocessor macros, rather than the (many, expanding list) i686-and-later processors. It seems HAS_I586 and HAS_I686 are unused so the only effect of these macros being missing is that 32-bit glibc built for one of these processors would end up doing runtime detection of CPUID availability. i386 builds are prevented by a configure test so there is no need to allow for them here. __geode__ (no long nops?) and __k6__ (no CMOV, at least according to GCC) are conservatively handled as i586, not i686, here (as noted above, this is a theoretical distinction at present in that only HAS_CPUID appears to be used). Tested for x86. * sysdeps/x86/cpu-features.h [__geode__ || __k6__]: Handle like [__i586__ || __pentium__]. [__i486__]: Handle explicitly. (HAS_CPUID): Define to 1 if above macros are undefined. (HAS_I586): Likewise. (HAS_I686): Likewise.
* misc: New test misc/tst-gethostidFlorian Weimer2018-09-203-0/+121
| | | | The empty /etc/hosts file used to trigger bug 23679.
* Linux gethostid: Check for NULL value from gethostbyname_r [BZ #23679]Mingli Yu2018-09-202-2/+7
| | | | A NULL value can happen with certain gethostbyname_r failures.
* Fix tst-setcontext9 for optimized small stacks.Carlos O'Donell2018-09-192-9/+44
| | | | | | | | | | | | | | | | | | If the compiler reduces the stack usage in function f1 before calling into function f2, then when we swapcontext back to f1 and continue execution we may overwrite registers that were spilled to the stack while f2 was executing. Later when we return to f2 the corrupt registers will be reloaded from the stack and the test will crash. This was most commonly observed on i686 with __x86.get_pc_thunk.dx and needing to save and restore $edx. Overall i686 has few registers and the spilling to the stack is bound to happen, therefore the solution to making this test robust is to split function f1 into two parts f1a and f1b, and allocate f1b it's own stack such that subsequent execution does not overwrite the stack in use by function f2. Tested on i686 and x86_64. Signed-off-by: Carlos O'Donell <carlos@redhat.com>
* Fix mktime localtime offset confusionPaul Eggert2018-09-193-3/+13
| | | | | | | | | | | [BZ #23603] * include/time.h (__mktime_internal): The localtime offset is now of type long int instead of time_t. This is the longstanding type in glibc, and it is more than enough to represent difference between localtime and gmtime even if it is 32 bits and time_t is 64. Changing it now will let us avoid an unnecessary change when time_t is widened to 64 bits on 32-bit platforms. * time/mktime-internal.h (mktime_offset_t): Now long int.
* Merge mktime, timegm from upstream GnulibPaul Eggert2018-09-196-316/+781
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [BZ #23603][BZ #16346] This fixes some obscure problems with integer overflow. Although it looks scary, it is almost all a byte-for-byte copy from Gnulib, and the Gnulib code has been tested reasonably well. * include/intprops.h: New file, copied from Gnulib. * include/verify.h, time/mktime-internal.h: New tiny files, simplified from Gnulib. * time/mktime.c: Copy from Gnulib. This has the following changes: Do not include config.h if DEBUG_MKTIME is nonzero. Include stdbool.h, intprops.h, verify.h. Include string.h only if needed. Include stdlib.h on MS-Windows. Include mktime-internal.h. (DEBUG_MKTIME): Default to 0, and simplify later uses. (NEED_MKTIME_INTERNAL, NEED_MKTIME_WINDOWS) (NEED_MKTIME_WORKING): Give default values to pacify -Wundef, which glibc uses. Default NEED_MKTIME_WORKING to DEBUG_MKTIME, to simplify later conditionals; default the others to zero. Use these conditionals to express only the code needed on the current platform. In uses of these conditionals, explicitly spell out how _LIBC affects things, so it’s easier to review from a glibc viewpoint. (WRAPV): Remove; no longer needed now that we have systematic overflow checking. (my_tzset, __tzset) [!_LIBC]: New function and macro, to better compartmentalize tzset issues. Move system-dependent tzsettish code here from mktime. (verify): Remove; now done by verify.h. All uses changed. (long_int): Use a more-conservative definition, to avoid integer overflow. (SHR): Remove, replacing with ... (shr): New function, which means we needn’t worry about side effects in args, and conversion analysis is simpler. (TYPE_IS_INTEGER, TYPE_TWOS_COMPLEMENT, TYPE_SIGNED, TYPE_MINIMUM) (TYPE_MAXIMUM, TIME_T_MIN, TIME_T_MAX, TIME_T_MIDPOINT) (time_t_avg, time_t_add_ok): Remove. (mktime_min, mktime_max): New constants. (leapyear, isdst_differ): Use bool for booleans. (ydhms_diff, guess_time_tm, ranged_convert, __mktime_internal): Use long_int, not time_t, for mktime differences. (long_int_avg): New function, replacing time_t_avg. INT_ADD_WRAPV replaces time_t_add_ok. (guess_time_tm): 6th arg is now long_int, not time_t const *. All uses changed. (convert_time): New function. (ranged_convert): Use it. (__mktime_internal): Last arg now points to mktime_offset_t, not time_t. All uses changed. This is a no-op on glibc, where mktime_offset_t is always time_t. Use int, not time_t, for UTC offset guess. Directly check for integer overflow instead of using a heuristic that works only 99.9...% of the time. Access *OFFSET only once, to avoid an unlikely race if the compiler delays a load and if this cascades into a signed integer overflow. (mktime): Move tzsettish code to my_tzset, and move localtime_offset to within mktime so that it doesn’t need a separate ifdef. (main) [DEBUG_MKTIME]: Speed up by using localtime_r instead of localtime. * time/timegm.c: Copy from Gnulib. This has the following changes: Include mktime-internal.h. [!_LIBC]: Include config.h and time.h. Do not include timegm.h or time_r.h. Make __mktime_internal a macro, and include mktime-internal.h to get its declaration. (timegm): Temporary is now mktime_offset_t, not time_t. This affects only Gnulib.
* Fix strstr bug with huge needles (bug 23637)Wilco Dijkstra2018-09-194-4/+44
| | | | | | | | | | | | | | | The generic strstr in GLIBC 2.28 fails to match huge needles. The optimized AVAILABLE macro reads ahead a large fixed amount to reduce the overhead of repeatedly checking for the end of the string. However if the needle length is larger than this, two_way_long_needle may confuse this as meaning the end of the string and return NULL. This is fixed by adding the needle length to the amount to read ahead. [BZ #23637] * string/test-strstr.c (pr23637): New function. (test_main): Add tests with longer needles. * string/strcasestr.c (AVAILABLE): Fix readahead distance. * string/strstr.c (AVAILABLE): Likewise.
* Fix the documentation comment of checkint in powfSzabolcs Nagy2018-09-192-1/+6
| | | | | | checkint in powf is not supposed to be used with 0, inf or nan inputs. * sysdeps/ieee754/flt-32/e_powf.c (checkint): Fix documentation.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-10 21:41:22 +0000