summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
* soft-fp: Make extensions of subnormals from XFmode to TFmode signal ↵Joseph Myers2014-10-097-2/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | underflow if traps enabled. This patch fixes a soft-fp corner case I previously noted in <https://sourceware.org/ml/libc-alpha/2013-10/msg00349.html>: when trapping on underflow is enabled, extensions of subnormals from XFmode to TFmode need to signal underflow because the result is tiny (but exact, so the underflow flag is not raised unless trapping is enabled). To avoid any excess initialization or tests for other cases of floating-point extensions, a new FP_INIT_TRAPPING_EXCEPTIONS is added that does the initialization required for this particular case (more than FP_INIT_EXCEPTIONS, less than FP_INIT_ROUNDMODE, in general), and FP_NO_EXACT_UNDERFLOW is added to stub out FP_TRAPPING_EXCEPTIONS tests for those cases of extensions where the test would be dead code, to avoid any uninitialized variable warnings. As the relevant case only applies in libgcc, not to any use of soft-fp in glibc, there is no bug report in Bugzilla and no non-default definitions of FP_INIT_TRAPPING_EXCEPTIONS are added by the patch. A testcase will be added to GCC as part of an update of soft-fp in libgcc once this patch is in libc. Tested for powerpc-nofpu that the disassembly of installed shared libraries is unchanged by this patch. Bootstrapped GCC with updated soft-fp with no regressions on x86_64-unknown-linux-gnu and verified that a test of the relevant case passes where it failed before. * soft-fp/op-common.h (FP_EXTEND): When a subnormal input produces a subnormal result, set the underflow exception if trapping on underflow is enabled. * soft-fp/soft-fp.h (FP_INIT_TRAPPING_EXCEPTIONS): New macro. (FP_INIT_EXCEPTIONS): Default to FP_INIT_TRAPPING_EXCEPTIONS. [FP_NO_EXACT_UNDERFLOW] (FP_TRAPPING_EXCEPTIONS): Undefine and redefine to 0. * soft-fp/extenddftf2.c (FP_NO_EXACT_UNDERFLOW): Define. * soft-fp/extendsfdf2.c (FP_NO_EXACT_UNDERFLOW): Likewise. * soft-fp/extendsftf2.c (FP_NO_EXACT_UNDERFLOW): Likewise. * soft-fp/extendxftf2.c (__extendxftf2): Use FP_INIT_TRAPPING_EXCEPTIONS instead of FP_INIT_ROUNDMODE.
* soft-fp: Remove FP_CLEAR_EXCEPTIONS.Joseph Myers2014-10-096-15/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As noted in <https://sourceware.org/ml/libc-alpha/2013-10/msg00516.html>, the soft-fp macro FP_CLEAR_EXCEPTIONS should not be necessary, as soft-fp code should never set an exception and later clear it. In fact, all four uses in glibc (for SPARC) are indeed unnecessary: they appear in files that convert 32-bit or 64-bit integers to IEEE binary128, an operation that can never raise any exceptions. If this was intended to enable the compiler to optimize away any FP_FROM_INT code testing for exceptional cases, we now have a better way of doing this: defining FP_NO_EXCEPTIONS before including soft-fp.h causes all code handling exceptions to be stubbed out, and the rounding mode to be hardwired for round-to-zero, to allow such optimizations for source files where (a) the operation in question, for the particular types in question, can never raise exceptions, but (b) some instances of the operation for other types can, so the macros used in the file do contain references to rounding or exceptions, albeit dead in that particular file. The uses in the Linux kernel are also unnecessary (clearing exceptions at a point where they are already cleared). This patch duly removes FP_CLEAR_EXCEPTIONS, making the SPARC code in question use FP_NO_EXCEPTIONS and stop using exception-related macros. * soft-fp/soft-fp.h (FP_CLEAR_EXCEPTIONS): Remove macro. * sysdeps/sparc/sparc32/soft-fp/q_itoq.c: Define FP_NO_EXCEPTIONS. (_Q_itoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or FP_HANDLE_EXCEPTIONS. * sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: Define FP_NO_EXCEPTIONS. (_Q_lltoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or FP_HANDLE_EXCEPTIONS. * sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: Define FP_NO_EXCEPTIONS. (_Q_ulltoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or FP_HANDLE_EXCEPTIONS. * sysdeps/sparc/sparc32/soft-fp/q_utoq.c: Define FP_NO_EXCEPTIONS. (_Q_utoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or FP_HANDLE_EXCEPTIONS.
* Don't use INTUSE with __adjtimex (bug 14132).Joseph Myers2014-10-087-12/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | Bug 14132 is removal of the old INTDEF/INTUSE system of *_internal aliases as obsoleted by the hidden_proto / hidden_def system. Various cases were cleaned up in 2012, but some remain. This patch removes the use of this mechanism for __adjtimex. Tested for x86_64 that stripped installed shared libraries are unchanged by the patch. [BZ #14132] * sysdeps/unix/sysv/linux/include/sys/timex.h: New file. * sysdeps/unix/sysv/linux/adjtime.c [!ADJTIMEX] (ADJTIMEX): Do not use INTUSE. [!ADJTIMEX] (INTUSE(__adjtimex)): Remove declaration. * sysdeps/unix/sysv/linux/alpha/adjtime.c (__adjtimex_internal): Remove alias. (__adjtimex): Define using libc_hidden_ver. * sysdeps/unix/sysv/linux/ntp_gettime.c (INTUSE(__adjtimex)): Remove declaration. (ntp_gettime): Call __adjtimex directly. * sysdeps/unix/sysv/linux/ntp_gettimex.c (INTUSE(__adjtimex)): Remove declaration. (ntp_gettimex): Call __adjtimex directly. * sysdeps/unix/sysv/linux/syscalls.list (adjtimex): Remove __adjtimex_internal alias.
* BZ#17460: Fix buffer overrun in nscd --help.Roland McGrath2014-10-084-25/+33
|
* Remove unnecessarily nested function in do_lookup_unique.Roland McGrath2014-10-082-27/+36
|
* Support and use mixed compat/non-compat aliases in syscalls.list.Joseph Myers2014-10-067-47/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables syscalls.list entries to specify both compat and non-compat symbol versions for the same syscall definition, making use of this for setrlimit / chown / lchown where the inability to specify such aliases showed up in the course of work on bug 14138. The change to make-syscalls.sh is minimal: adding a SHARED conditional on the compat_symbol calls. It remains the case that if a compat symbol version is specified, the syscall is only built for the shared library at all if an explicit symbol version is given for a non-compat symbol (so it's necessary to specify "lchown@@GLIBC_2.0 chown@GLIBC_2.0" rather than just "lchown chown@GLIBC_2.0"). It also remains the case, as already commented in make-syscalls.sh, that no SHLIB_COMPAT conditionals are generated, so there would be problems if the same syscalls.list file, with compat symbols, were used for both configurations that should have those symbols and configurations for which they should be conditioned out with SHLIB_COMPAT. Tested for x86. * sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Condition compat_symbol calls on [SHARED]. * sysdeps/unix/sysv/linux/powerpc/lchown.S: Remove file. * sysdeps/unix/sysv/linux/i386/syscalls.list (oldsetrlimit): Remove. (setrlimit): Add setrlimit@GLIBC_2.0 alias. * sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list (oldsetrlimit): Remove. (setrlimit): Add setrlimit@GLIBC_2.0 alias. * sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list (lchown): New syscall entry. (oldsetrlimit): Remove. (setrlimit): Add setrlimit@GLIBC_2.0 alias. * sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list (oldsetrlimit): Remove. (setrlimit): Add setrlimit@GLIBC_2.0 alias.
* Move some chown / lchown / fchown definitions to syscalls.list (bug 14138).Joseph Myers2014-10-069-47/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the move of syscall definitions to syscalls.list, where the removal of support for old kernel versions has made this possible, this patch moves various definitions of chown, lchown and fchown. In most cases the need for special syscalls.list entries (rather than existing generic ones) is because these architectures use chown32, lchown32 and fchown32 as syscall names. Some architectures also have symbol versioning compatibility for older versions of chown having been equivalent to lchown. In the case of powerpc, chown.c (providing the chown@@GLIBC_2.1 default version) is replaced by a syscalls.list entry (for powerpc32; powerpc64 has no need for this because of its more recent minimum symbol version, so can just use the entry in sysdeps/unix/syscalls.list), but lchown.S is left as-is because it provides the compat version of chown as an actual alias for __lchown, which is not yet supported by syscalls.list. This file can be removed once such aliases are supported in syscalls.list. [BZ #14138] * sysdeps/unix/sysv/linux/arm/fchown.c: Remove file. * sysdeps/unix/sysv/linux/arm/lchown.c: Likewise. * sysdeps/unix/sysv/linux/m68k/fchown.c: Likewise. * sysdeps/unix/sysv/linux/m68k/lchown.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/chown.c: Likewise. * sysdeps/unix/sysv/linux/arm/syscalls.list (lchown): Add syscall. (fchown): Likewise. * sysdeps/unix/sysv/linux/m68k/syscalls.list (lchown): Likewise. (fchown): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list (chown): Likewise.
* powerpc: remove linux lowlevellock.hAdhemerval Zanella2014-10-064-347/+15
| | | | | This patch remove the powerpc specific lowlevellock.h and adjust some implementation that rely on __lll_[rel/acq]_instr defines.
* tile: fix copyright header blocks in just-committed filesChris Metcalf2014-10-064-13/+6
| | | | I accidentally committed versions not following the conventions.
* tile: add clock_gettime support via vDSOChris Metcalf2014-10-066-6/+81
|
* tile: make the prolog of clone() more conformantChris Metcalf2014-10-062-5/+9
| | | | | With this change we properly set up the frame first, and tear it down last, doing argument checking only when the frame is set up.
* tile: optimize memcmpChris Metcalf2014-10-062-0/+369
| | | | | | | | | | | | | | Customize memcmp.c for tile, using similar tricks from memcpy: - replace MERGE macro with dblalign. - replace memcmp_bytes function with revbytes. - use __glibc_likely. - use post-increment addressing. The schedule is still not perfect: the compiler is not hoisting code above the comparison branch, which could save a bundle or two. memcmp speeds up by 30-40% on shorter aligned tests in benchtest, with some tests with unaligned lengths taking a small performance hit.
* tile: add support for _SC_LEVEL*CACHE* sysconf() queriesChris Metcalf2014-10-062-0/+77
|
* tilegx: provide optimized strnlen, strstr, and strcasestrChris Metcalf2014-10-065-5/+406
| | | | | | | | | | | | | | | | | | | | | | strnlen() is based on the existing tile strlen() with length checking added. It speeds up by up to 5x, but on average across the benchtest corpus by around 35%. No regressions are seen. strstr() does 8-byte aligned loads and compares using a 2-byte filter on the first two bytes of the needle and then testing the remaining bytes in needle using memcmp(). It speeds up about 5x in the best case (for "found" needles), about 2x looking at benchtest as a whole, with some slowdowns as much as 45%. on a few cases (including the "fail" case for 128KB search). strcasestr() is based on strstr() but uses a SIMD tolower routine to convert 8-bytes to lower case in 5 instructions. It also uses a 2-byte filter and then strncasecmp() for the remaining bytes. strncasecmp() is not optimized for SIMD, so there is futher room for improvement. However, it is still up to 16x faster for "found" needles, averaging 2x faster on the whole corpus of benchtests. It does slow down by up to 35% on a few cases, similarly to strstr().
* tilegx: optimize string copy_byte() internal functionChris Metcalf2014-10-062-6/+9
| | | | | We can use one "shufflebytes" instruction instead of 3 "bfins" instructions to optimize the string functions.
* Write errors to stdout and not stderr in nptl/tst-setuid3.cArjun Shankar2014-10-062-15/+25
| | | | | nptl/tst-setuid3.c was using the `err' and `errx' functions to write error messages. This wrote to stderr instead of the preferred stdout.
* remove nested functions from elf/dl-deps.cKostya Serebryany2014-10-012-15/+21
|
* Move execve to syscalls.list (bug 14138).Joseph Myers2014-10-013-35/+7
| | | | | | | | | | | | | | Continuing the move of syscall definitions to syscalls.list, where previous cleanups have made this possible, this patch moves the definition of execve. (In this case, it was the removal of bounded pointers support, rather than old kernel support, which made the move possible.) Tested for x86_64. [BZ #14138] * sysdeps/unix/sysv/linux/execve.c: Remove file. * sysdeps/unix/sysv/linux/syscalls.list (execve): Add syscall.
* Remove extra whitespace from end of line.Steve Ellcey2014-10-011-1/+1
|
* * sysdeps/mips/strcmp.S: New.Steve Ellcey2014-10-012-0/+253
|
* Move some *at definitions to syscalls.list (bug 14138).Joseph Myers2014-09-309-272/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the move of syscall definitions to syscalls.list, where the removal of support for old kernel versions has made this possible, this patch moves definitions of various *at functions in sysdeps/unix/sysv/linux/. These particular moves are straightforward: there are no #includes of these source files, no special architecture-specific versions, no special symbol version handling and no aliases. Each source file can be replaced by a single line in sysdeps/unix/sysv/linux/syscalls.list. Tested for x86_64. [BZ #14138] * sysdeps/unix/sysv/linux/syscalls.list (fchownat): New syscall. (linkat): Likewise. (mkdirat): Likewise. (readlinkat): Likewise. (renameat): Likewise. (symlinkat): Likewise. (unlinkat): Likewise. * sysdeps/unix/sysv/linux/fchownat.c: Remove file. * sysdeps/unix/sysv/linux/linkat.c: Likewise. * sysdeps/unix/sysv/linux/mkdirat.c: Likewise. * sysdeps/unix/sysv/linux/readlinkat.c: Likewise. * sysdeps/unix/sysv/linux/renameat.c: Likewise. * sysdeps/unix/sysv/linux/symlinkat.c: Likewise. * sysdeps/unix/sysv/linux/unlinkat.c: Likewise.
* stdlib/tst-strtod-round.c: Fix build on ARMWill Newton2014-09-303-1/+9
| | | | | | | | | | | | | | | | | Building this test on ARM fails because the prototypes for the long double variants of the math functions are unavailable. Add an additional include guard to math.h that enables long double math function declarations if _LIBC_TEST is defined and define _LIBC_TEST in stdlib/tst-strtod-round.c. ChangeLog: 2014-09-30 Will Newton <will.newton@linaro.org> * math/math.h: Define long double math functions if _LIBC_TEST is defined. * stdlib/tst-strtod-round.c: Define _LIBC_TEST.
* Allow cross-building of testsWill Newton2014-09-303-3/+11
| | | | | | | | | | | | | Allow building tests in a cross configuration without a test wrapper defined. This is helpful for doing simple build testing of tests. ChangeLog: 2014-09-30 Will Newton <will.newton@linaro.org> * localedata/Makefile: Move assignment to tests-special into an ifdef testing run-built-tests. * timezone/Makefile: Likewise.
* Run tst-ld-sse-use.sh with bash.Joseph Myers2014-09-292-1/+6
| | | | | | | | | | | | | | tst-ld-sse-use.sh is a bash script, not a POSIX shell script, and so needs to be run with $(BASH) not $(SHELL) to avoid errors of the form: ../sysdeps/x86/tst-ld-sse-use.sh: 41: ../sysdeps/x86/tst-ld-sse-use.sh: declare: not found (when /bin/sh is dash). This patch makes that change. Tested for x86_64. * sysdeps/x86/Makefile ($(objpfx)tst-ld-sse-use.out): Run script with $(BASH) not $(SHELL).
* Correctly size profiling reloc table (bug 17411)Carlos O'Donell2014-09-293-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During auditing or profiling modes the dynamic loader builds a cache of the relocated PLT entries in order to reuse them when called again through the same PLT entry. This way the PLT entry is never completed and the call into the resolver always results in profiling or auditing code running. The problem is that the PLT relocation cache size is not computed correctly. The size of the cache should be "Size of a relocation result structure" x "Number of PLT-related relocations". Instead the code erroneously computes "Size of a relocation result" x "Number of bytes worth of PLT-related relocations". I can only assume this was a mistake in the understanding of the value of DT_PLTRELSZ which is the number of bytes of PLT-related relocs. We do have a DT_RELACOUNT entry, which is a count for dynamic relative relocs, but we have no DT_PLTRELCOUNT and thus we need to compute it. This patch corrects the computation of the size of the relocation table used by the glibc profiling code. For more details see: https://sourceware.org/ml/libc-alpha/2014-09/msg00513.html [BZ #17411] * elf/dl-reloc.c (_dl_relocate_object): Allocate correct amount for l_reloc_result.
* remove nested function hack_digitKostya Serebryany2014-09-292-230/+246
|
* Require autoconf 2.69H.J. Lu2014-09-2915-132/+168
| | | | | | | | | | | | | | | | | | | * aclocal.m4: Require autoconf 2.69. * configure: Regenerated. * sysdeps/aarch64/configure: Likewise. * sysdeps/alpha/configure: Likewise. * sysdeps/arm/armv7/configure: Likewise. * sysdeps/arm/configure: Likewise. * sysdeps/ia64/configure: Likewise. * sysdeps/mach/configure: Likewise. * sysdeps/mips/configure: Likewise. * sysdeps/s390/configure: Likewise. * sysdeps/unix/sysv/linux/mips/configure: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/configure: Likewise. * sysdeps/alpha/configure.ac: Avoid empty lines at the end of file. * sysdeps/ia64/configure.ac: Likewise.
* Remove shlib-versions entries redundant with DEFAULT entries.Joseph Myers2014-09-265-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a shlib-versions file has a DEFAULT line, it's not necessary to specify the same default minimum symbol version on the lines for individual libraries. If those lines otherwise duplicate the default SONAME for the library in question, they can be removed completely. This patch makes such cleanups: version entries for ld.so are removed (leaving just the definition of the architecture-specific dynamic linker name) and entries for libpthread are removed completely (since the default is libpthread.so.0). Tested for x86_64 that the installed shared libraries are unchanged by this patch. There are various architectures (hppa, ia64, mips, sh, sparc64) that define minimum symbol versions (or in the case of mips, omission of symbol versions) only for particular libraries without a DEFAULT line. None of these are equivalent to something simpler with a DEFAULT line because all have some other libraries, not explicitly mentioned, with symbol versions that would be omitted were such a line used. In the mips case I'm pretty sure it was a mistake not to omit the 2.1 symbols for libthread_db; for the others I don't know if it was a mistake or deliberate that some symbols in various libraries have 2.0 or 2.1 versions despite other libraries having a 2.2 minimum. This concludes the shlib-versions cleanups I'm aware of. * sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Do not specify symbol version for ld.so. Do not include entry for libpthread. * sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
* Clean up gnu/lib-names.h generation (bug 14171).Joseph Myers2014-09-2616-65/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch eliminates the mixture of SONAME information in shlib-versions files and SONAME information used to generate gnu/lib-names.h in makefiles, with the information in the makefiles being removed so all this information comes from the shlib-versions files. So that gnu/lib-names.h supports multiple ABIs, it is changed to be generated on the same basis as gnu/stubs.h: when there are multiple ABIs, gnu/lib-names.h is a wrapper header (the same header installed whatever ABI is being built) and separate headers such as gnu/lib-names-64.h contain the substantive contents (only one such header being installed by any glibc build). The rules for building gnu/lib-names.h were moved from Makeconfig to Makerules because they need to come after sysdeps makefiles are included (now that "ifndef abi-variants" is a toplevel conditional on the rules rather than $(abi-variants) being evaluated later inside the commands for a rule). Tested for x86_64 and x86 that the installed shared libraries are unchanged by this patch, and examined the installed gnu/lib-names*.h headers by hand. Also tested the case of a single ABI (where there is just a single header installed, again like stubs.h) by hacking abi-variants to empty for x86_64. [BZ #14171] * Makeconfig [$(build-shared) = yes] ($(common-objpfx)soversions.mk): Don't handle SONAMEs specified in makefiles. [$(build-shared) = yes && $(soversions.mk-done) = t] ($(common-objpfx)gnu/lib-names.h): Remove rule. [$(build-shared) = yes && $(soversions.mk-done) = t] ($(common-objpfx)gnu/lib-names.stmp): Likewise. Split and moved to Makerules. [$(build-shared) = yes && $(soversions.mk-done) = t] (before-compile): Don't append $(common-objpfx)gnu/lib-names.h here. [$(build-shared) = yes && $(soversions.mk-done) = t] (common-generated): Don't append gnu/lib-names.h and gnu/lib-names.stmp here. * Makerules [$(build-shared) = yes && $(soversions.mk-done) = t] (lib-names-h-abi): New variable. [$(build-shared) = yes && $(soversions.mk-done) = t] (lib-names-stmp-abi): Likewise. [$(build-shared) = yes && $(soversions.mk-done) = t && abi-variants] (before-compile): Append $(common-objpfx)$(lib-names-h-abi). [$(build-shared) = yes && $(soversions.mk-done) = t && abi-variants] (common-generated): Append gnu/lib-names.h. [$(build-shared) = yes && $(soversions.mk-done) = t && abi-variants] (install-others-nosubdir): Depend on $(inst_includedir)/$(lib-names-h-abi). [$(build-shared) = yes && $(soversions.mk-done) = t && abi-variants] ($(common-objpfx)gnu/lib-names.h): New rule. [$(build-shared) = yes && $(soversions.mk-done) = t] ($(common-objpfx)$(lib-names-h-abi)): New rule. [$(build-shared) = yes && $(soversions.mk-done) = t] ($(common-objpfx)$(lib-names-stmp-abi)): Likewise. [$(build-shared) = yes && $(soversions.mk-done) = t] (common-generated): Append $(lib-names-h-abi) and $(lib-names-stmp-abi). * scripts/lib-names.awk: Do not handle multi being set. * sysdeps/unix/sysv/linux/aarch64/Makefile (abi-lp64-ld-soname): Remove variable. (abi-lp64_be-ld-soname): Likewise. * sysdeps/unix/sysv/linux/arm/Makefile (abi-soft-ld-soname): Likewise. (abi-hard-ld-soname): Likewise. * sysdeps/unix/sysv/linux/i386/shlib-versions: New file. * sysdeps/unix/sysv/linux/mips/Makefile (abi-o32_soft-ld-soname): Remove variable. (abi-o32_hard-ld-soname): Likewise. (abi-o32_soft_2008-ld-soname): Likewise. (abi-o32_hard_2008-ld-soname): Likewise. (abi-n32_soft-ld-soname): Likewise. (abi-n32_hard-ld-soname): Likewise. (abi-n32_soft_2008-ld-soname): Likewise. (abi-n32_hard_2008-ld-soname): Likewise. (abi-n64_soft-ld-soname): Likewise. (abi-n64_hard-ld-soname): Likewise. (abi-n64_soft_2008-ld-soname): Likewise. (abi-n64_hard_2008-ld-soname): Likewise. * sysdeps/unix/sysv/linux/powerpc/Makefile (abi-64-v1-ld-soname): Likewise. (abi-64-v2-ld-soname): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: Add ld.so entries. * sysdeps/unix/sysv/linux/s390/Makefile (abi-64-ld-soname): Remove variable. * sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Add ld.so entry. * sysdeps/unix/sysv/linux/x86/Makefile (abi-32-ld-soname): Remove variable. (abi-64-ld-soname): Likewise. (abi-x32-ld-soname): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Add ld.so entry. * sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
* Move some setrlimit definitions to syscalls.list (bug 14138).Joseph Myers2014-09-2311-43/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug 14138 is followup cleanup after removal of support for old Linux kernel versions: moving syscalls to syscalls.list where the only reason for using C definitions was kernel version conditionals that are no longer present. This patch deals with the case of setrlimit (sysdeps/unix/sysv/linux/i386/setrlimit.c, included by various other architectures). Where needed (where there is also a compat symbol for setrlimit@GLIBC_2.0), new syscalls.list entries are added. Where not needed (where there is no such compat symbol and the minimum symbol version for libc is 2.2 or later), no such entries are added as that in sysdeps/unix/syscalls.list will suffice. Thus arm and sh need no such entries, while m68k and powerpc need entries only in a subdirectory syscalls.list file rather than for all configurations that previously used setrlimit.c. (setrlimit@@GLIBC_2.2 and setrlimit@GLIBC_2.0 are now semantically identical - the new symbol version was about a change of types from signed to unsigned and the former compatibility code for dealing with large unsigned arguments on old kernels is no longer needed or present, having been removed with support for pre-2.4 kernels. However, making the two versions into aliases doesn't work at present: the case of having both default and non-default symbol versions on the same syscalls.list line results in a compat_symbol call in code built for static libc, which doesn't compile. I don't suppose it would be hard to generate SHARED conditionals from make-syscalls.sh to fix this, but in any case this patch doesn't make things any worse, as the functions weren't aliases before the patch either.) Tested for x86, and ran ABI tests for ARM as an example of an architecture where the setrlimit.c file was just removed without adding syscalls.list entries. [BZ #14138] * sysdeps/unix/sysv/linux/arm/setrlimit.c: Remove file. * sysdeps/unix/sysv/linux/i386/setrlimit.c: Likewise. * sysdeps/unix/sysv/linux/m68k/setrlimit.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/setrlimit.c: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/setrlimit.c: Likewise. * sysdeps/unix/sysv/linux/sh/setrlimit.c: Likewise. * sysdeps/unix/sysv/linux/i386/syscalls.list (setrlimit): Add syscall entry for GLIBC_2.2 symbol version. * sysdeps/unix/sysv/linux/m68k/m680x0/syscalls.list (setrlimit): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/syscalls.list (setrlimit): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/syscalls.list (setrlimit): Likewise.
* ARM: Don't define _SYS_AUXV_H in sysdep.hWill Newton2014-09-233-2/+8
| | | | | | | | | | | | | | | | sysdep.h was defining _SYS_AUXV_H in order to avoid an include guard check in hwcap.h. Unfortunately it didn't undefine it so it could leak out into code and caused a build failure with -Wimplicit-function-declaration building tst-auxv on ARM. ChangeLog: 2014-09-23 Will Newton <will.newton@linaro.org> * sysdeps/unix/sysv/linux/arm/bits/hwcap.h: Check for _LINUX_ARM_SYSDEP_H include guard too. * sysdeps/unix/sysv/linux/arm/sysdep.h (_SYS_AUXV_H): Remove define.
* Fix prototype of eventfd.Rasmus Villemoes2014-09-204-3/+10
|
* Sync recvmmsg prototype with kernel usage.Ondřej Bílka2014-09-204-5/+11
|
* stdlib/longlong.h: Add __udiv_w_sdiv prototype.Andreas Krebbel2014-09-192-1/+6
|
* New test for ftimeArjun Shankar2014-09-183-1/+65
| | | | | | | | | This test verifies the sanity of ftime and exposes bugs such as BZ 2014-09-17 Arjun Shankar <arjun.is@lostca.se> * time/tst-ftime.c: New test. * time/Makefile (tests): Add tst-ftime.
* soft-fp: Fix comment formatting.Joseph Myers2014-09-178-183/+121
| | | | | | | | | | | | | | | | | This patch fixes formatting of comments in soft-fp (in particular, the normal style in glibc does not have a leading '*' on each line, and comments should start with capital letters and end with ". */"). Tested for powerpc-nofpu that the disassembly of installed shared libraries is unchanged by this patch. * soft-fp/extended.h: Fix comment formatting. * soft-fp/op-1.h: Likewise. * soft-fp/op-2.h: Likewise. * soft-fp/op-4.h: Likewise. * soft-fp/op-8.h: Likewise. * soft-fp/op-common.h: Likewise. * soft-fp/soft-fp.h: Likewise.
* soft-fp: Correct _FP_TO_INT formatting.Joseph Myers2014-09-172-5/+11
| | | | | | | | | | This patch corrects some soft-fp formatting that failed to follow the GNU Coding Standards. Tested for powerpc-nofpu that the disassembly of installed shared libraries is unchanged by this patch. * soft-fp/op-common.h (_FP_TO_INT): Correct formatting.
* Remove bitrotten --enable-oldest-abi (bug 6652).Joseph Myers2014-09-1615-89/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the --enable-oldest-abi configure option, which has long been bitrotten (as reported in bug 6652). The principle of removing this option was agreed in the thread starting at <https://sourceware.org/ml/libc-alpha/2013-07/msg00174.html>. Tested for x86_64 and x86 that the installed shared libraries other than libc.so are unchanged by this patch and that libc.so disassembly and symbol versions are unchanged (debug info changes because of changed line numbers in csu/version.c). [BZ #6652] * Makeconfig (soversions-default-setname): Remove variable. ($(common-objpfx)soversions.i): Don't pass default_setname to soversions.awk. * Makerules ($(common-objpfx)abi-versions.h): Don't pass oldest_abi to abi-versions.awk. * config.h.in (GLIBC_OLDEST_ABI): Remove macro undefine. * config.make.in (oldest-abi): Remove variable. * configure.ac (--enable-oldest-abi): Remove configure option. * configure: Regenerated. * csu/version.c (banner) [GLIBC_OLDEST_ABI]: Remove conditional text. * scripts/abi-versions.awk: Do not handle oldest_abi variable. * scripts/soversions.awk: Do not handle default_setname variable. * sysdeps/mach/hurd/configure.ac: Do not handle oldest_abi variable. * sysdeps/mach/hurd/configure: Regenerated. * sysdeps/unix/sysv/linux/configure.ac: Do not handle oldest_abi variable. * sysdeps/unix/sysv/linux/configure: Regenerated.
* Remove CFLAGS for interp.cSiddhesh Poyarekar2014-09-163-3/+17
| | | | | | | | | | | Replace it with including an auto-generated linker-runtime.h. Build-tested on x86_64 and found that there was no change in the generated code. * elf/Makefile (CFLAGS-interp.c): Remove. ($(elf-objpfx)runtime-linker.h): Generate header with linker path string. * elf/interp.c: Include generated runtime-linker.h
* Include .interp section only for libc.soSiddhesh Poyarekar2014-09-164-203/+7
| | | | | | | | | | | | | | | | | | Barring libc.so and libdl.so, none of the libraries have any entry points, so it is pointless to add a .interp section for them. The libdl.so entry point (in dlfcn/eval.c) is also defunct, so remove that file as well. Build tested for x86_64, ppc64 and s390x. I have not moved CFLAGS-interp.c to CPPFLAGS-interp.c isnce I'll be removing it completely in a follow-up patch. Siddhesh * Makerules (lib%.so): Don't include $(+interp) in prerequisites. * elf/Makefile (CFLAGS-interp.c): Don't define NOT_IN_libc. * dlfcn/eval.c: Remove file.
* Assume that all _[PS]C_* and _CS_* macros are always definedSiddhesh Poyarekar2014-09-162-628/+3
| | | | | | The macros in question are always defined in confname.h for all variants and there seems to be no reason to allow such variants to exist anyway.
* Make __extern_always_inline usable on clang++ againSiddhesh Poyarekar2014-09-162-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fix for BZ #17266 (884ddc5081278f488ef8cd49951f41cfdbb480ce) removed changes that had gone into cdefs.h to make __extern_always_inline usable with clang++. This patch adds back support for clang to detect if GNU inlining semantics are available, this time without breaking the gcc use case. The check put here is based on the earlier patch and assertion[1] that checking if __GNUC_STDC_INLINE__ or __GNUC_GNU_INLINE__ is defined is sufficient to determine that clang++ suports GNU inlining semantics. Tested with a simple program that builds with __extern_always_inline with the patch and fails compilation without it. #include <stdio.h> #include <sys/cdefs.h> extern void foo_alias (void) __asm ("foo"); __extern_always_inline void foo (void) { puts ("hi oh world!"); return foo_alias (); } void foo_alias (void) { puts ("hell oh world"); } int main () { foo (); } [1] https://sourceware.org/ml/libc-alpha/2012-12/msg00306.html [BZ #17266] * misc/sys/cdefs.h: Define __extern_always_inline for clang 4.2 and newer.
* Fix memory leak in error path of do_ftell_wide (BZ #17370)Siddhesh Poyarekar2014-09-162-1/+9
|
* Add NEWS entry for previous commitSiddhesh Poyarekar2014-09-161-1/+1
|
* Revert to defining __extern_inline only for gcc-4.3+ (BZ #17266)Siddhesh Poyarekar2014-09-164-14/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The check for only __GNUC_STDC_INLINE__ and __GNUC_GNU_INLINE__ may not be sufficient since those flags were added during initial support for C99 inlining semantics. There is also a problem with always defining __extern_inline and __extern_always_inline, since it enables inline wrapper functions even when GNU inlining semantics are not guaranteed. This, along with the possibility of such wrappers using redirection (btowc for example) could result in compiler generating an infinitely recusrive call to the function. In fact it was such a recursion that led to this code being written the way it was; see: https://bugzilla.redhat.com/show_bug.cgi?id=186410 The initial change was to fix bugs 14530 and 13741, but they can be resolved by checking if __fortify_function and/or __extern_always_inline are defined, as it has been done in this patch. In addition, I have audited uses of __extern_always_inline to make sure that none of the uses result in compilation errors. There is however a regression in this patch for llvm, since it reverts the llvm expectation that __GNUC_STDC_INLINE__ or __GNUC_GNU_INLINE__ definition imply proper extern inline semantics. 2014-09-16 Siddhesh Poyarekar <siddhesh@redhat.com> Jakub Jelinek <jakub@redhat.com> [BZ #17266] * libio/stdio.h: Check definition of __fortify_function instead of __extern_always_inline to include bits/stdio2.h. * math/bits/math-finite.h [__USE_XOPEN || __USE_ISOC99]: Also check if __extern_always_inline is defined. [__USE_MISC || __USE_XOPEN]: Likewise. [__USE_ISOC99] Likewise. * misc/sys/cdefs.h (__fortify_function): Define only if __extern_always_inline is defined. [!__cplusplus || __GNUC_PREREQ (4,3)]: Revert to defining __extern_always_inline and __extern_inline only for g++-4.3 and newer or a compatible gcc.
* Handle zero prefix length in getifaddrs (BZ #17371)Andreas Schwab2014-09-153-8/+11
|
* Remove _POSIX_REGEX_VERSIONSiddhesh Poyarekar2014-09-152-4/+5
| | | | | | | | | | | | There is no _POSIX_REGEX_VERSION, so don't check for it. _REGEX_VERSION has been removed as well[1], so only keep the -1 return for backward compatibility. I found this when trying to make the getconf environment variables typo-proof. * sysdeps/posix/sysconf.c (__sysconf): Return -1 for _SC_REGEX_VERSION. [1] http://pubs.opengroup.org/onlinepubs/009695399/functions/sysconf.html
* Add correct variable names for _POSIX_IPV6 and _POSIX_RAW_SOCKETSSiddhesh Poyarekar2014-09-152-0/+12
| | | | | | | | | | | getconf only recognizes IPV6 and RAW_SOCKETS, when the standard requires it to recognize the actual configuration variable name[1]. I have not removed the earlier names for compatibility. * posix/getconf.c (vars): Add _POSIX_IPV6 and _POSIX_RAW_SOCKETS. [1] http://pubs.opengroup.org/onlinepubs/007904875/functions/sysconf.html
* Update Russian translationAllan McRae2014-09-132-5/+9
|
* Minor cleanup in locale.cRoland McGrath2014-09-122-135/+133
|
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-12-11 13:37:21 +0000