summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
* Replace --enable-static-pie with --disable-default-pieSiddhesh Poyarekar2021-12-1322-90/+205
| | | | | | | | | | | | | | | | | | | | | | | | Build glibc programs and tests as PIE by default and enable static-pie automatically if the architecture and toolchain supports it. Also add a new configuration option --disable-default-pie to prevent building programs as PIE. Only the following architectures now have PIE disabled by default because they do not work at the moment. hppa, ia64, alpha and csky don't work because the linker is unable to handle a pcrel relocation generated from PIE objects. The microblaze compiler is currently failing with an ICE. GNU hurd tries to enable static-pie, which does not work and hence fails. All these targets have default PIE disabled at the moment and I have left it to the target maintainers to enable PIE on their targets. build-many-glibcs runs clean for all targets. I also tested x86_64 on Fedora and Ubuntu, to verify that the default build as well as --disable-default-pie work as expected with both system toolchains. Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* hurd: Add rules for static PIE buildSamuel Thibault2021-12-122-5/+14
| | | | This fixes [BZ #28671].
* hurd: Fix gmon-staticSamuel Thibault2021-12-122-5/+5
| | | | We need to use crt0 for gmon-static too.
* x86-64: Remove LD_PREFER_MAP_32BIT_EXEC support [BZ #28656]H.J. Lu2021-12-105-95/+4
| | | | | | | | | | Remove the LD_PREFER_MAP_32BIT_EXEC environment variable support since the first PT_LOAD segment is no longer executable due to defaulting to -z separate-code. This fixes [BZ #28656]. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* elf: Use errcode instead of (unset) errno in rtld_chain_loadFlorian Weimer2021-12-101-1/+1
|
* Add a testcase to check alignment of PT_LOAD segment [BZ #28676]H.J. Lu2021-12-103-2/+82
|
* elf: Properly align PT_LOAD segments [BZ #28676]Rongwei Wang2021-12-103-5/+50
| | | | | | | | | | | When PT_LOAD segment alignment > the page size, allocate enough space to ensure that the segment can be properly aligned. This change helps code segments use huge pages become simple and available. This fixes [BZ #28676]. Signed-off-by: Xu Yu <xuyu@linux.alibaba.com> Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com>
* elf: Install a symbolic link to ld.so as /usr/bin/ld.soFlorian Weimer2021-12-102-1/+9
| | | | | | | | This makes ld.so features such as --preload, --audit, and --list-diagnostics more accessible to end users because they do not need to know the ABI name of the dynamic loader. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* nptl: Add one more barrier to nptl/tst-create1Florian Weimer2021-12-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | Without the bar_ctor_finish barrier, it was possible that thread2 re-locked user_lock before ctor had a chance to lock it. ctor then blocked in its locking operation, xdlopen from the main thread did not return, and thread2 was stuck waiting in bar_dtor: thread 1: started. thread 2: started. thread 2: locked user_lock. constructor started: 0. thread 1: in ctor: started. thread 3: started. thread 3: done. thread 2: unlocked user_lock. thread 2: locked user_lock. Fixes the test in commit 83b5323261bb72313bffcf37476c1b8f0847c736 ("elf: Avoid deadlock between pthread_create and ctors [BZ #28357]"). Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* Remove TLS_TCB_ALIGN and TLS_INIT_TCB_ALIGNFlorian Weimer2021-12-0923-134/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TLS_INIT_TCB_ALIGN is not actually used. TLS_TCB_ALIGN was likely introduced to support a configuration where the thread pointer has not the same alignment as THREAD_SELF. Only ia64 seems to use that, but for the stack/pointer guard, not for storing tcbhead_t. Some ports use TLS_TCB_OFFSET and TLS_PRE_TCB_SIZE to shift the thread pointer, potentially landing in a different residue class modulo the alignment, but the changes should not impact that. In general, given that TLS variables have their own alignment requirements, having different alignment for the (unshifted) thread pointer and struct pthread would potentially result in dynamic offsets, leading to more complexity. hppa had different values before: __alignof__ (tcbhead_t), which seems to be 4, and __alignof__ (struct pthread), which was 8 (old default) and is now 32. However, it defines THREAD_SELF as: /* Return the thread descriptor for the current thread. */ # define THREAD_SELF \ ({ struct pthread *__self; \ __self = __get_cr27(); \ __self - 1; \ }) So the thread pointer points after struct pthread (hence __self - 1), and they have to have the same alignment on hppa as well. Similarly, on ia64, the definitions were different. We have: # define TLS_PRE_TCB_SIZE \ (sizeof (struct pthread) \ + (PTHREAD_STRUCT_END_PADDING < 2 * sizeof (uintptr_t) \ ? ((2 * sizeof (uintptr_t) + __alignof__ (struct pthread) - 1) \ & ~(__alignof__ (struct pthread) - 1)) \ : 0)) # define THREAD_SELF \ ((struct pthread *) ((char *) __thread_self - TLS_PRE_TCB_SIZE)) And TLS_PRE_TCB_SIZE is a multiple of the struct pthread alignment (confirmed by the new _Static_assert in sysdeps/ia64/libc-tls.c). On m68k, we have a larger gap between tcbhead_t and struct pthread. But as far as I can tell, the port is fine with that. The definition of TCB_OFFSET is sufficient to handle the shifted TCB scenario. This fixes commit 23c77f60181eb549f11ec2f913b4270af29eee38 ("nptl: Increase default TCB alignment to 32"). Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* nptl: rseq failure after registration on main thread is fatalFlorian Weimer2021-12-091-1/+2
| | | | | | | | | | | | | | | | | | | | This simplifies the application programming model. Browser sandboxes have already been fixed: Sandbox is incompatible with rseq registration <https://bugzilla.mozilla.org/show_bug.cgi?id=1651701> Allow rseq in the Linux sandboxes. r=gcp <https://hg.mozilla.org/mozilla-central/rev/042425712eb1> Sandbox needs to support rseq system call <https://bugs.chromium.org/p/chromium/issues/detail?id=1104160> Linux sandbox: Allow rseq(2) <https://chromium.googlesource.com/chromium/src.git/+/230675d9ac8f1> Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* nptl: Add public rseq symbols and <sys/rseq.h>Florian Weimer2021-12-0938-5/+237
| | | | | | | | | | | | | The relationship between the thread pointer and the rseq area is made explicit. The constant offset can be used by JIT compilers to optimize rseq access (e.g., for really fast sched_getcpu). Extensibility is provided through __rseq_size and __rseq_flags. (In the future, the kernel could request a different rseq size via the auxiliary vector.) Co-Authored-By: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* nptl: Add glibc.pthread.rseq tunable to control rseq registrationFlorian Weimer2021-12-098-9/+145
| | | | | | | | This tunable allows applications to register the rseq area instead of glibc. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* Linux: Use rseq to accelerate sched_getcpuFlorian Weimer2021-12-091-2/+17
| | | | | Co-Authored-By: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* nptl: Add rseq registrationFlorian Weimer2021-12-0916-3/+952
| | | | | | | | | | | | The rseq area is placed directly into struct pthread. rseq registration failure is not treated as an error, so it is possible that threads run with inconsistent registration status. <sys/rseq.h> is not yet installed as a public header. Co-Authored-By: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
* nptl: Introduce THREAD_GETMEM_VOLATILEFlorian Weimer2021-12-093-0/+6
| | | | | | This will be needed for rseq TCB access. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* nptl: Introduce <tcb-access.h> for THREAD_* accessorsFlorian Weimer2021-12-0921-376/+301
| | | | | | | These are common between most architectures. Only the x86 targets are outliers. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* nptl: Add <thread_pointer.h> for defining __thread_pointerFlorian Weimer2021-12-093-0/+99
| | | | | | | | | <tls.h> already contains a definition that is quite similar, but it is not consistent across architectures. Only architectures for which rseq support is added are covered. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* String: test-memcpy used unaligned types for buffers [BZ 28572]John David Anglin2021-12-071-2/+3
| | | | | | | | | | | | | | | | | | | | | commit d585ba47fcda99fdf228e3e45a01b11a15efbc5a Author: Noah Goldstein <goldstein.w.n@gmail.com> Date: Mon Nov 1 00:49:48 2021 -0500 string: Make tests birdirectional test-memcpy.c Add tests that had src/dst non 4-byte aligned. Since src/dst are initialized/compared as uint32_t type which is 4-byte aligned this can break on some targets. Fix the issue by specifying a new non-aligned 4-byte `unaligned_uint32_t` for src/dst. Another alternative is to rely on memcpy/memcmp for initializing/testing src/dst. Using memcpy for initializing in memcpy tests, however, could lead to future bugs. Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
* localedef: check magic value on archive load [BZ #28650]Aurelien Jarno2021-12-071-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | localedef currently blindly trust the archive header. When passed an archive file with the wrong endianess, this leads to a segmentation fault: $ localedef --big-endian --list-archive /usr/lib/locale/locale-archive Segmentation fault (core dumped) When passed non-archive files, asserts are reported on the best case, but sometimes it can lead to a segmentation fault: $ localedef --list-archive /bin/true localedef: programs/locarchive.c:1643: show_archive_content: Assertion `used < GET (head->namehash_used)' failed. Aborted (core dumped) $ localedef --list-archive /usr/lib/locale/C.utf8/LC_COLLATE Segmentation fault (core dumped) This patch improves the user experience by looking at the magic value, which is always written, but never checked. It should still be possible to trigger a segmentation fault with crafted files, but this already catch many cases.
* x86: Don't set Prefer_No_AVX512 for processors with AVX512 and AVX-VNNIH.J. Lu2021-12-061-2/+5
| | | | | | Don't set Prefer_No_AVX512 on processors with AVX512 and AVX-VNNI since they won't lower CPU frequency when ZMM load and store instructions are used.
* linux: Add generic ioctl implementationAdhemerval Zanella2021-12-063-31/+85
| | | | The powerpc is refactor to use the default implementation.
* linux: Add generic syscall implementationAdhemerval Zanella2021-12-064-67/+65
| | | | | It allows also to remove hppa specific implementation and simplify riscv implementation a bit.
* misc, nptl: Remove stray references to __condvar_load_64_relaxedFlorian Weimer2021-12-062-3/+3
| | | | | | The function was renamed to __atomic_wide_counter_load_relaxed in commit 8bd336a00a5311bf7a9e99b3b0e9f01ff5faa74b ("nptl: Extract <bits/atomic_wide_counter.h> from pthread_cond_common.c").
* csu: Always use __executable_start in gmon-start.cFlorian Weimer2021-12-054-89/+3
| | | | | | | | | | | | | | Current binutils defines __executable_start as the lowest text address, so using the entry point address as a fallback is no longer necessary. As a result, overriding <entry.h> is only necessary if the entry point is not called _start. The previous approach to define __ASSEMBLY__ to suppress the declaration breaks if headers included by <entry.h> are not compatible with __ASSEMBLY__. This happens with rseq integration because it is necessary to include kernel headers in more places. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* elf: execve statically linked programs instead of crashing [BZ #28648]Florian Weimer2021-12-056-8/+161
| | | | | | | | | | | | | | | Programs without dynamic dependencies and without a program interpreter are now run via execve. Previously, the dynamic linker either crashed while attempting to read a non-existing dynamic segment (looking for DT_AUDIT/DT_DEPAUDIT data), or the self-relocated in the static PIE executable crashed because the outer dynamic linker had already applied RELRO protection. <dl-execve.h> is needed because execve is not available in the dynamic loader on Hurd. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* Add --with-timeoutfactor=NUM to specify TIMEOUTFACTORH.J. Lu2021-12-046-1/+37
| | | | | | | | | On Ice Lake and Tiger Lake laptops, some test programs timeout when there are 3 "make check -j8" runs in parallel. Add --with-timeoutfactor=NUM to specify an integer to scale the timeout of test programs, which can be overriden by TIMEOUTFACTOR environment variable. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* x86-64: Use notl in EVEX strcmp [BZ #28646]Noah Goldstein2021-12-032-6/+36
| | | | | | | | Must use notl %edi here as lower bits are for CHAR comparisons potentially out of range thus can be 0 without indicating mismatch. This fixes BZ #28646. Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
* nptl: Increase default TCB alignment to 32Florian Weimer2021-12-0318-50/+4
| | | | | | | | | | rseq support will use a 32-byte aligned field in struct pthread, so the whole struct needs to have at least that alignment. nptl/tst-tls3mod.c uses TCB_ALIGNMENT, therefore include <descr.h> to obtain the fallback definition. Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* elf: add definition for ELF_NOTE_FDO and NT_FDO_PACKAGING_METADATA noteLuca Boccassi2021-12-021-0/+6
| | | | | | | As defined on: https://systemd.io/COREDUMP_PACKAGE_METADATA/ this note will be used starting from Fedora 36. Signed-off-by: Luca Boccassi <bluca@debian.org>
* AArch64: Improve A64FX memcpyWilco Dijkstra2021-12-021-321/+225
| | | | | | | | | | | | | v2 is a complete rewrite of the A64FX memcpy. Performance is improved by streamlining the code, aligning all large copies and using a single unrolled loop for all sizes. The code size for memcpy and memmove goes down from 1796 bytes to 868 bytes. Performance is better in all cases: bench-memcpy-random is 2.3% faster overall, bench-memcpy-large is ~33% faster for large sizes, bench-memcpy-walk is 25% faster for small sizes and 20% for the largest sizes. The geomean of all tests in bench-memcpy is 5.1% faster, and total time is reduced by 4%. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* AArch64: Optimize memcmpWilco Dijkstra2021-12-021-107/+134
| | | | | | | | Rewrite memcmp to improve performance. On small and medium inputs performance is 10-20% better. Large inputs use a SIMD loop processing 64 bytes per iteration, which is 30-50% faster depending on the size. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
* powerpc64[le]: Fix CFI and LR save address for asm syscalls [BZ #28532]Matheus Castanho2021-11-301-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Syscalls based on the assembly templates are missing CFI for r31, which gets clobbered when scv is used, and info for LR is inaccurate, placed in the wrong LOC and not using the proper offset. LR was also being saved to the callee's frame, while the ABI mandates it to be saved to the caller's frame. These are fixed by this commit. After this change: $ readelf -wF libc.so.6 | grep 0004b9d4.. -A 7 && objdump --disassemble=kill libc.so.6 00004a48 0000000000000020 00004a4c FDE cie=00000000 pc=000000000004b9d4..000000000004ba3c LOC CFA r31 ra 000000000004b9d4 r1+0 u u 000000000004b9e4 r1+48 u u 000000000004b9e8 r1+48 c-16 u 000000000004b9fc r1+48 c-16 c+16 000000000004ba08 r1+48 c-16 000000000004ba18 r1+48 u 000000000004ba1c r1+0 u libc.so.6: file format elf64-powerpcle Disassembly of section .text: 000000000004b9d4 <kill>: 4b9d4: 1f 00 4c 3c addis r2,r12,31 4b9d8: 2c c3 42 38 addi r2,r2,-15572 4b9dc: 25 00 00 38 li r0,37 4b9e0: d1 ff 21 f8 stdu r1,-48(r1) 4b9e4: 20 00 e1 fb std r31,32(r1) 4b9e8: 98 8f ed eb ld r31,-28776(r13) 4b9ec: 10 00 ff 77 andis. r31,r31,16 4b9f0: 1c 00 82 41 beq 4ba0c <kill+0x38> 4b9f4: a6 02 28 7d mflr r9 4b9f8: 40 00 21 f9 std r9,64(r1) 4b9fc: 01 00 00 44 scv 0 4ba00: 40 00 21 e9 ld r9,64(r1) 4ba04: a6 03 28 7d mtlr r9 4ba08: 08 00 00 48 b 4ba10 <kill+0x3c> 4ba0c: 02 00 00 44 sc 4ba10: 00 00 bf 2e cmpdi cr5,r31,0 4ba14: 20 00 e1 eb ld r31,32(r1) 4ba18: 30 00 21 38 addi r1,r1,48 4ba1c: 18 00 96 41 beq cr5,4ba34 <kill+0x60> 4ba20: 01 f0 20 39 li r9,-4095 4ba24: 40 48 23 7c cmpld r3,r9 4ba28: 20 00 e0 4d bltlr+ 4ba2c: d0 00 63 7c neg r3,r3 4ba30: 08 00 00 48 b 4ba38 <kill+0x64> 4ba34: 20 00 e3 4c bnslr+ 4ba38: c8 32 fe 4b b 2ed00 <__syscall_error> ... 4ba44: 40 20 0c 00 .long 0xc2040 4ba48: 68 00 00 00 .long 0x68 4ba4c: 06 00 5f 5f rlwnm r31,r26,r0,0,3 4ba50: 6b 69 6c 6c xoris r12,r3,26987
* linux: Implement pipe in terms of __NR_pipe2Adhemerval Zanella2021-11-3010-221/+3
| | | | | | | | | The syscall pipe2 was added in linux 2.6.27 and glibc requires linux 3.2.0. The patch removes the arch-specific implementation for alpha, ia64, mips, sh, and sparc which requires a different kernel ABI than the usual one. Checked on x86_64-linux-gnu and with a build for the affected ABIs.
* linux: Implement mremap in CAdhemerval Zanella2021-11-303-1/+42
| | | | | | | | | Variadic function calls in syscalls.list does not work for all ABIs (for instance where the argument are passed on the stack instead of registers) and might have underlying issues depending of the variadic type (for instance if a 64-bit argument is used). Checked on x86_64-linux-gnu.
* linux: Add prlimit64 C implementationAdhemerval Zanella2021-11-3018-27/+47
| | | | | | | | | | | The LFS prlimit64 requires a arch-specific implementation in syscalls.list. Instead add a generic one that handles the required symbol alias for __RLIM_T_MATCHES_RLIM64_T. HPPA is the only outlier which requires a different default symbol. Checked on x86_64-linux-gnu and with build for the affected ABIs.
* elf: Include <stdbool.h> in tst-tls20.cFlorian Weimer2021-11-301-0/+1
| | | | The test uses the bool type.
* elf: Include <stdint.h> in tst-tls20.cFlorian Weimer2021-11-301-0/+1
| | | | The test uses standard integer types.
* hurd: Let report-wait use a weak reference to _hurd_itimer_threadSamuel Thibault2021-11-281-5/+0
| | | | libc.so.0.3 does not seem to need this defined any more.
* linux: Use /proc/stat fallback for __get_nprocs_conf (BZ #28624)Adhemerval Zanella2021-11-251-25/+35
| | | | | | | The /proc/statm fallback was removed by f13fb81ad3159 if sysfs is not available, reinstate it. Checked on x86_64-linux-gnu.
* linux: Add fanotify_mark C implementationAdhemerval Zanella2021-11-2518-22/+42
| | | | | | | | | Passing 64-bit arguments on syscalls.list is tricky: it requires to reimplement the expected kernel abi in each architecture. This is way to better to represent in C code where we already have macros for this (SYSCALL_LL64). Checked on x86_64-linux-gnu.
* linux: Only build fstatat fallback if requiredAdhemerval Zanella2021-11-251-7/+11
| | | | | | | For 32-bit architecture with __ASSUME_STATX there is no need to build fstatat64_time64_stat. Checked on i686-linux-gnu.
* regex: fix buffer read overrun in search [BZ#28470]Paul Eggert2021-11-241-4/+3
| | | | | | Problem reported by Benno Schulenberg in: https://lists.gnu.org/r/bug-gnulib/2021-10/msg00035.html * posix/regexec.c (re_search_internal): Use better bounds check.
* x86-64: Add vector sin/sinf to libmvec microbenchmarkSunil K Pandey2021-11-243-0/+8201
| | | | | | | | | | | | | | | | | | | | Add vector sin/sinf and input files to libmvec microbenchmark. libmvec-sin-inputs: 90% Normal random distribution range: (-DBL_MAX, DBL_MAX) mean: 0.0 sigma: 5.0 10% uniform random distribution in range (-1000.0, 1000.0) libmvec-sinf-inputs: 90% Normal random distribution range: (-FLT_MAX, FLT_MAX) mean: 0.0f sigma: 5.0f 10% uniform random distribution in range (-1000.0f, 1000.0f) Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector pow/powf to libmvec microbenchmarkSunil K Pandey2021-11-243-0/+8201
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add vector pow/powf and input files to libmvec microbenchmark. libmvec-pow-inputs: arg1: 90% Normal random distribution range: (0.0, 256.0) mean: 0.0 sigma: 32.0 10% uniform random distribution in range (0.0, 256.0) arg2: 90% Normal random distribution range: (-127.0, 127.0) mean: 0.0 sigma: 16.0 10% uniform random distribution in range (-127.0, 127.0) libmvec-powf-inputs: arg1: 90% Normal random distribution range: (0.0f, 100.0f) mean: 0.0f sigma: 16.0f 10% uniform random distribution in range (0.0f, 100.0f) arg2: 90% Normal random distribution range: (-10.0f, 10.0f) mean: 0.0f sigma: 8.0f 10% uniform random distribution in range (-10.0f, 10.0f) Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector log/logf to libmvec microbenchmarkSunil K Pandey2021-11-243-0/+8201
| | | | | | | | | | | | | | | | | | | | Add vector log/logf and input files to libmvec microbenchmark. libmvec-log-inputs: 70% Normal random distribution range: (0.0, DBL_MAX) mean: 1.0 sigma: 50.0 30% uniform random distribution in range (0.0, DBL_MAX) libmvec-logf-inputs: 70% Normal random distribution range: (0.0f, FLT_MAX) mean: 1.0f sigma: 50.0f 30% uniform random distribution in range (0.0f, FLT_MAX) Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector exp/expf to libmvec microbenchmarkSunil K Pandey2021-11-243-0/+8201
| | | | | | | | | | | | | | | | | | | | Add vector exp/expf and input files to libmvec microbenchmark. libmvec-exp-inputs: 90% Normal random distribution range: (-708.0, 709.0) mean: 0.0 sigma: 16.0 10% uniform random distribution in range (-500.0, 500.0) libmvec-expf-inputs: 90% Normal random distribution range: (-87.0f, 88.0f) mean: 0.0f sigma: 8.0f 10% uniform random distribution in range (-50.0f, 50.0f) Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* x86-64: Add vector cos/cosf to libmvec microbenchmarkSunil K Pandey2021-11-243-0/+8201
| | | | | | | | | | | | | | | | | | | | Add vector cos/cosf and input files to libmvec microbenchmark. libmvec-cos-inputs: 90% Normal random distribution range: (-DBL_MAX, DBL_MAX) mean: 0.0 sigma: 5.0 10% uniform random distribution in range (-1000.0, 1000.0) libmvec-cosf-inputs: 90% Normal random distribution range: (-FLT_MAX, FLT_MAX) mean: 0.0f sigma: 5.0f 10% uniform random distribution in range (-1000.0f, 1000.0f) Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
* io: Refactor close_range and closefromAdhemerval Zanella2021-11-2415-68/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | Now that Hurd implementis both close_range and closefrom (f2c996597d), we can make close_range() a base ABI, and make the default closefrom() implementation on top of close_range(). The generic closefrom() implementation based on __getdtablesize() is moved to generic close_range(). On Linux it will be overriden by the auto-generation syscall while on Hurd it will be a system specific implementation. The closefrom() now calls close_range() and __closefrom_fallback(). Since on Hurd close_range() does not fail, __closefrom_fallback() is an empty static inline function set by__ASSUME_CLOSE_RANGE. The __ASSUME_CLOSE_RANGE also allows optimize Linux __closefrom_fallback() implementation when --enable-kernel=5.9 or higher is used. Finally the Linux specific tst-close_range.c is moved to io and enabled as default. The Linuxism and CLOSE_RANGE_UNSHARE are guarded so it can be built for Hurd (I have not actually test it). Checked on x86_64-linux-gnu, i686-linux-gnu, and with a i686-gnu build.
* nptl: Do not set signal mask on second setjmp return [BZ #28607]Florian Weimer2021-11-243-2/+48
| | | | | | | | | | | | __libc_signal_restore_set was in the wrong place: It also ran when setjmp returned the second time (after pthread_exit or pthread_cancel). This is observable with blocked pending signals during thread exit. Fixes commit b3cae39dcbfa2432b3f3aa28854d8ac57f0de1b8 ("nptl: Start new threads with all signals blocked [BZ #25098]"). Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-23 22:47:25 +0000