summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
* libio: Multiple fixes for open_{w}memstram (BZ#18241 and BZ#20181)Adhemerval Zanella2016-09-309-63/+348
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patches fixes multiples issues on open_{w}memstream reported on both BZ#18241 and BZ#20181: - failed fseek does not set errno. - negative offset in fseek fails even when resulting position is a valid one. - a flush after write if the current write position is not at the end of the stream currupt data. The main fix is on seek operation for memstream (_IO_{w}str_seekoff), where both _IO_read_ptr and _IO_read_end pointer are updated if a write operation has occured (similar to default file operations). Also, to calculate the offset on both read and write pointers, a temporary value is instead of updating the argument supplied value. Negative offset are valid if resulting internal pointer is within the range of _IO_{read,write}_base and _IO_{read,write}_end. Also POSIX states that a null or wide null shall be appended to the current buffer iff a write moves the position to a value larger than the current lenght. Current implementation appends a null or wide null regardless of this condition. This patch fixes it by removing the 'else' condition on _IO_{w}mem_sync. Checked on x86_64. [BZ #18241] [BZ #20181] * libio/Makefile (test): Add tst-memstream3 and tst-wmemstream3. * libio/memstream.c (_IO_mem_sync): Only append a null byte if write position is at the end the buffer. * libio/wmemstream.c (_IO_wmem_sync): Likewise. * libio/strops.c (_IO_str_switch_to_get_mode): New function. (_IO_str_seekoff): Set correct offset from negative displacement and set EINVAL for invalid ones. * libio/wstrops.c (enlarge_userbuf): Use correct function to calculate buffer length. (_IO_wstr_switch_to_get_mode): New function. (_IO_wstr_seekoff): Set correct offset from negative displacement and set EINVAL for invalid ones. * libio/tst-memstream3.c: New file. * libio/tst-wmemstream3.c: Likewise. * manual/examples/memstrm.c: Remove warning when priting size_t.
* Use __builtin_fma more in dbl-64 code.Joseph Myers2016-09-303-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysdeps/ieee754/dbl-64/dla.h can use a macro DLA_FMS for more efficient double-width operations when fused multiply-subtract is supported. However, this macro is only defined for x86_64, conditional on architecture-specific __FMA4__. This patch makes the code use __builtin_fma conditional on __FP_FAST_FMA, as used elsewhere in glibc. Tested for x86_64, x86 and powerpc. On powerpc (where this is causing fused operations to be used where they weren't previously) I see an increase from 1ulp to 2ulp in the imaginary part of clog10: testing double (without inline functions) Failure: Test: Imaginary part of: clog10 (0x1.7a858p+0 - 0x6.d940dp-4 i) Result: is: -1.2237865208199886e-01 -0x1.f5435146bb61ap-4 should be: -1.2237865208199888e-01 -0x1.f5435146bb61cp-4 difference: 2.7755575615628914e-17 0x1.0000000000000p-55 ulp : 2.0000 max.ulp : 1.0000 Maximal error of real part of: clog10 is : 3 ulp accepted: 3 ulp Maximal error of imaginary part of: clog10 is : 2 ulp accepted: 1 ulp This is actually resulting from atan2 becoming *more* accurate (atan2 (-0x6.d940dp-4, 0x1.7a858p+0) should ideally be -0x1.208cd6e841554p-2 but was -0x1.208cd6e841555p-2 from a powerpc libm built before this change, and is -0x1.208cd6e841554p-2 from a powerpc libm built after this change). Since these functions are not expected to be correctly rounding by glibc's accuracy goals, neither result is a problem, but this does imply that some of this code, although designed to be correctly rounding, is not in fact correctly rounding (possibly because of GCC creating fused operations where the code does not expect it, something we've only disabled for specific functions where it was found to cause large errors). (Of course as previously discussed I think we should remove the slow cases where an error analysis shows this wouldn't increase the errors much above 0.5ulp; it's only functions such as cratan2 that are expected to be correctly rounding, not atan2.) * sysdeps/ieee754/dbl-64/dla.h [__FP_FAST_FMA] (DLA_FMS): Define macro to use __builtin_fma. * sysdeps/x86_64/fpu/dla.h: Remove file.
* Fix ldbl-128ibm iscanonical for -mlong-double-64.Joseph Myers2016-09-302-1/+11
| | | | | | | | | | | This patch fixes the ldbl-128ibm version of the iscanonical macro not to use __iscanonicall when long double = double (-mlong-double-64). Tested for powerpc. * sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h [__NO_LONG_DOUBLE_MATH] (__iscanonicall): Do not declare. [__NO_LONG_DOUBLE_MATH] (iscanonical): Define to evaluate to 1.
* Bug 20292 - Simplify and test _dl_addr_inside_objectCarlos O'Donell2016-09-306-35/+325
| | | | | | | | The function _dl_addr_inside_object is simplified by removing the conditional 'reladdr - l->l_phdr[n].p_vaddr >= 0' which is always true. The function is refactored into it's own object file and a unit test added to verify the correct behaviour of the function.
* Add iscanonical.Joseph Myers2016-09-3027-8/+643
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 adds an iscanonical classification macro to <math.h>. The motivation for this is decimal floating-point, where some values have both canonical and noncanonical encodings. For IEEE binary interchange formats, all encodings are canonical. For x86/m68k ldbl-96, and for ldbl-128ibm, there are encodings that do not represent any valid value of the type; although formally iscanonical does not need to handle trap representations (and so could just always return 1), it seems useful, and in line with the description in the TS of "representations that are extraneous to the floating-point model" as being non-canonical (as well as "redundant representations of some or all of its values"), for it to detect those representations and return 0 for them. This patch adds iscanonical to glibc. It goes in a header <bits/iscanonical.h>, included under appropriate conditions in <math.h>. The default header version just evaluates the argument (converted to its semantic type, though current GCC will probably discard that conversion and any exceptions resulting from it) and returns 1. ldbl-96 and ldbl-128ibm then have versions of the header that call a function __iscanonicall for long double (the sizeof-based tests will of course need updating for float128 support, like other such type-generic macro implementations). The ldbl-96 version of __iscanonicall has appropriate conditionals to reflect the differences in the m68k version of that format (where the high mantissa bit may be either 0 or 1 when the exponent is 0 or 0x7fff). Corresponding tests for those formats are added as well. Other architectures do not have any new functions added because just returning 1 is correct for all their floating-point formats. Tested for x86_64, x86, mips64 (to test the default macro version) and powerpc. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Include <bits/iscanonical.h>. * bits/iscanonical.h: New file. * math/s_iscanonicall.c: Likewise. * math/Versions (__iscanonicall): New libm symbol at version GLIBC_2.25. * math/libm-test.inc (iscanonical_test_data): New array. (iscanonical_test): New function. (main): Call iscanonical_test. * math/Makefile (headers): Add bits/iscanonical.h. (type-ldouble-routines): Add s_iscanonicall. * manual/arith.texi (Floating Point Classes): Document iscanonical. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add test-iscanonical-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-96/s_iscanonicall.c: Likewise. * sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Likewise. * sysdeps/ieee754/ldbl-96/Makefile: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Remove C++ style comments from string3.hAdhemerval Zanella2016-09-292-1/+5
| | | | | | | | | | | | | | The new check-installed-headers rule check now complains with C++ comment from string3.h with: ../string/bits/string3.h:129:1: error: C++ style comments are not allowed in ISO C90 // XXX We have no corresponding builtin yet. Let use old C style comment to make compiler happy in old modes. Tested on x86_64. * string/bits/string3.h: Remove C++ style comments.
* Use copysign instead of ternary for some sin/cos input rangesSiddhesh Poyarekar2016-09-302-13/+24
| | | | | | | | | | | | | | | | | | | These are remaining cases where we can deduce and conclude that the sign of the result should be the same as the sign of the input being checked. For example, for sin(x), the sign of the result is the same as the result itself for x < pi. Likewise, for sine values where x after range reduction falls into this range and its sign is preserved. * sysdeps/ieee754/dbl-64/s_sin.c (do_sincos_1): Use copysign instead of ternary condition. (do_sincos_2): Likewise. (__sin): Likewise. (__cos): Likewise. (slow): Likewise. (sloww): Likewise. (sloww1): Likewise. (bsloww): Likewise. (bsloww1): Likewise.
* Use copysign instead of ternary conditions for positive constantsSiddhesh Poyarekar2016-09-302-19/+32
| | | | | | | | | | | | | | | | | | This is the first very simple substitution of ternary conditions for correction adjustments with __copysign for positive constants. * sysdeps/ieee754/dbl-64/s_sin.c (do_cos_slow): use copysign instead of ternary condition. (do_sin_slow): Likewise. (do_sincos_1): Likewise. (do_sincos_2): Likewise. (__cos): Likewise. (sloww): Likewise. (sloww1): Likewise. (sloww2): Likewise. (bsloww): Likewise. (bsloww1): Likewise. (bsloww2): Likewise.
* consolidate sign checks for slow2Siddhesh Poyarekar2016-09-302-8/+17
| | | | | | | | | | Simplify the code a bit by consolidating sign checks in slow1 and slow2 into __sin at the higher level. * sysdeps/ieee754/dbl-64/s_sin.c (slow1): Consolidate sign check from here... (slow2): ... and here... (__sin): ... to here.
* Fix iszero for excess precision.Joseph Myers2016-09-284-2/+62
| | | | | | | | | | | | | | | | | | | | | | | | | Floating-point classification macros are supposed to remove any excess range or precision from their arguments. This patch fixes the non-sNaN version of iszero to do so, by casting the argument to its own type. (This will of course work only for standard-conforming excess precision, not for what GCC does on 32-bit x86 by default where the back end hides excess precision from the front end; the same applies to most of the classification macros in that case, as showed up when we made them use GCC built-in functions.) (iseqsig will have the reverse issue, needing to ensure that when an underlying function is used it's for a type wide enough not to remove any excess precision, since comparison macros must not remove excess precision.) Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT) && !__SUPPORT_SNAN__] (iszero): Cast argument to its own type. * math/test-iszero-excess-precision.c: New file. * math/Makefile (tests): Add test-iszero-excess-precision. (CFLAGS-test-iszero-excess-precision.c): New variable.
* posix: Fix open file action for posix_spawn on LinuxAdhemerval Zanella2016-09-284-1/+203
| | | | | | | | | | | | | | | | | | | | | On posix_spawn open file action (issued by posix_spawn_file_actions_addopen) POSIX states that if fildes was already an open file descriptor, it shall be closed before the new file is openedi [1]. This avoid pontential issues when posix_spawn plus addopen action is called with the process already at maximum number of file descriptor opened and also for multiple actions on single-open special paths (like /dev/watchdog). This fixes its behavior on Linux posix_spawn implementation and also adds a tests to check for its behavior. Checked on x86_64. * posix/Makefile (tests): Add tst-spawn3. * posix/tst-spawn3.c: New file. * sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Close file descriptor if it is already opened for open action. [1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/posix_spawn_file_actions_addclose.html
* linux: spawni.c: simplify error reporting to parentRasmus Villemoes2016-09-282-46/+32
| | | | | | | | | | | | | | | | | | | | | | | | | Using CLONE_VFORK already ensures that the parent does not run until the child has either exec'ed succesfully or called _exit. Hence we don't need to read from a CLOEXEC pipe to ensure proper synchronization - we just make explicit use of the fact the the child and parent run in the same VM, so the child can write an error code to a field of the posix_spawn_args struct instead of sending it through a pipe. To ensure that this mechanism really works, the parent initializes the field to -1 and the child writes 0 before execing. This eliminates some annoying bookkeeping that is necessary to avoid the file actions from clobbering the write end of the pipe, and getting rid of the pipe creation in the first place means fewer system calls (four in the parent, usually one in the child) and fewer chanches for the spawn to fail (e.g. if we're close to EMFILE). Checked on x86_64 and i686. * sysdeps/unix/sysv/linux/spawni.c (posix_spawn_args): Remove pipe field, add err field. (__spawni_child): Report error through err member instead of pipe. (__spawnix): Likewise.
* Minor corrections to scripts/check-installed-headers.sh.Zack Weinberg2016-09-282-3/+11
| | | | | * scripts/check-installed-headers.sh: Generalize treatment of sys/elf.h to all target architectures.
* Minor correction to the "installed header hygiene" patches.Zack Weinberg2016-09-282-2/+7
| | | | | * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Restore accidentally- deleted typedef ucontext_t.
* Add INTERNAL_SYSCALL_CALLAdhemerval Zanella2016-09-262-18/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds two new macros for internal and inline syscall to use within GLIBC: INTERNAL_SYSCALL_CALL and INLINE_SYSCALL_CALL. They are similar to the old INTERNAL_SYSCALL and INLINE_SYSCALL with the difference the new macros accept a variable argument call and do not require to pass the expected argument size. The advantage is it is possible to use variable argument macros like SYSCALL_LL{64} without the need to also handle the argument size. So for an ABI where SYSCALL_LL might split the argument in high and low parts, instead of: INTERNAL_SYSCALL_DECL (err); #if ... INTERNAL_SYSCALL (syscall, err, 2, SYSCALL_LL (len)); #else INTERNAL_SYSCALL (syscall, err, 1, SYSCALL_LL (len)); #endif It will be just: INTERNAL_SYSCALL_CALL (syscall, err, SYSCALL_LL (len)); The INLINE_SYSCALL_CALL follows the same semanthic regarding the argument and is similar to INLINE_SYSCALL regarding setting errno. Checked with a build for x86_64, i386, aach64, armhf, powerpc64le, powerpc32, and mips32. No code generation changed. * sysdeps/unix/sysdep.h (__INTERNAL_SYSCALL0): New macro. (__INTERNAL_SYSCALL1): Likewise. (__INTERNAL_SYSCALL2): Likewise. (__INTERNAL_SYSCALL3): Likewise. (__INTERNAL_SYSCALL4): Likewise. (__INTERNAL_SYSCALL5): Likewise. (__INTERNAL_SYSCALL6): Likewise. (__INTERNAL_SYSCALL7): Likewise. (__INTERNAL_SYSCALL_NARGS_X): Likewise. (__INTERNAL_SYSCALL_NARGS): Likewise. (__INTERNAL_SYSCALL_DISP): Likewise. (INTERNAL_SYSCALL_CALL): Likewise. (__SYSCALL0): Rename to __INLINE_SYSCALL0. (__SYSCALL1): Rename to __INLINE_SYSCALL1. (__SYSCALL2): Rename to __INLINE_SYSCALL2. (__SYSCALL3): Rename to __INLINE_SYSCALL3. (__SYSCALL4): Rename to __INLINE_SYSCALL4. (__SYSCALL5): Rename to __INLINE_SYSCALL5. (__SYSCALL6): Rename to __INLINE_SYSCALL6. (__SYSCALL7): Rename to __INLINE_SYSCALL7. (__SYSCALL_NARGS_X): Rename to __INLINE_SYSCALL_NARGS_X. (__SYSCALL_NARGS): Rename to __INLINE_SYSCALL_NARGS. (__SYSCALL_DISP): Rename to __INLINE_SYSCALL_DISP. (__SYSCALL_CALL): Rename to INLINE_SYSCALL_CALL. (SYSCALL_CANCEL): Replace __SYSCALL_CALL with INLINE_SYSCALL_CALL.
* Add iszero.Joseph Myers2016-09-236-3/+55
| | | | | | | | | | | | | | | | | | | | | TS 18661-1 adds an iszero classification macro to <math.h>. This patch implements it for glibc. There are no new underlying functions in libm because the implementation uses fpclassify when sNaN support is required and a direct comparison otherwise; any optimizations for this macro should be done through adding __builtin_iszero in GCC and using it in the header for suitable GCC versions, not through adding other optimized inline or out-of-line versions to glibc. Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iszero): New macro. * math/libm-test.inc (iszero_test_data): New array. (iszero_test): New function. (main): Call iszero_test. * manual/arith.texi (Floating Point Classes): Document iszero. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated.
* Installed header hygiene (BZ#20366): Test of installed headers.Zack Weinberg2016-09-2366-21/+470
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a test to ensure that the problems fixed in the last several patches do not recur. Each directory checks the headers that it installs for two properties: first, each header must be compilable in isolation, as both C and C++, under a representative combination of language and library conformance levels; second, there is a blacklist of identifiers that may not appear in any installed header, currently consisting of the legacy BSD typedefs. (There is an exemption for the headers that define those typedefs, and for the RPC headers. It may be necessary to make this more sophisticated if we add more stuff to the blacklist in the future.) In order for this test to work correctly, every wrapper header that actually defines something must guard those definitions with #ifndef _ISOMAC. This is the existing mechanism used by the conform/ tests to tell wrapper headers not to define anything that the public header wouldn't, and not to use anything from libc-symbols.h. conform/ only cares for headers that we need to check for standards conformance, whereas this test applies to *every* header. (Headers in include/ that are either installed directly, or are internal-use-only and do *not* correspond to any installed header, are not affected.) * scripts/check-installed-headers.sh: New script. * Rules: In each directory that defines header files to be installed, run check-installed-headers.sh on them as a special test. * Makefile: Likewise for the headers installed at top level. * include/aliases.h, include/alloca.h, include/argz.h * include/arpa/nameser.h, include/arpa/nameser_compat.h * include/elf.h, include/envz.h, include/err.h * include/execinfo.h, include/fpu_control.h, include/getopt.h * include/gshadow.h, include/ifaddrs.h, include/libintl.h * include/link.h, include/malloc.h, include/mcheck.h * include/mntent.h, include/netinet/ether.h * include/nss.h, include/obstack.h, include/printf.h * include/pty.h, include/resolv.h, include/rpc/auth.h * include/rpc/auth_des.h, include/rpc/auth_unix.h * include/rpc/clnt.h, include/rpc/des_crypt.h * include/rpc/key_prot.h, include/rpc/netdb.h * include/rpc/pmap_clnt.h, include/rpc/pmap_prot.h * include/rpc/pmap_rmt.h, include/rpc/rpc.h * include/rpc/rpc_msg.h, include/rpc/svc.h * include/rpc/svc_auth.h, include/rpc/xdr.h * include/rpcsvc/nis_callback.h, include/rpcsvc/nislib.h * include/rpcsvc/yp.h, include/rpcsvc/ypclnt.h * include/rpcsvc/ypupd.h, include/shadow.h * include/stdio_ext.h, include/sys/epoll.h * include/sys/file.h, include/sys/gmon.h, include/sys/ioctl.h * include/sys/prctl.h, include/sys/profil.h * include/sys/statfs.h, include/sys/sysctl.h * include/sys/sysinfo.h, include/ttyent.h, include/utmp.h * sysdeps/arm/nacl/include/bits/setjmp.h * sysdeps/mips/include/sys/asm.h * sysdeps/unix/sysv/linux/include/sys/sysinfo.h * sysdeps/unix/sysv/linux/include/sys/timex.h * sysdeps/x86/fpu/include/bits/fenv.h: Add #ifndef _ISOMAC guard around internal declarations. Add multiple-inclusion guard if not already present.
* Installed-header hygiene (BZ#20366): stack_t.Zack Weinberg2016-09-2333-108/+271
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sys/ucontext.h unconditionally uses stack_t, and it does not make sense to change that. But signal.h only declares stack_t under __USE_XOPEN_EXTENDED || __USE_XOPEN2K8. The actual definition is already in a bits header, bits/sigstack.h, but that header insists on only being included by signal.h, so we have to change that as well as all of the sys/ucontext.h variants. (Some but not all variants of bits/sigcontext.h, which sys/ucontext.h may also need, had already received this adjustment; for consistency, I made them all the same, even if that's not strictly necessary in some configurations.) bits/sigcontext.h and bits/sigstack.h also all need to receive multiple inclusion guards. * sysdeps/generic/sys/ucontext.h * sysdeps/arm/sys/ucontext.h * sysdeps/i386/sys/ucontext.h * sysdeps/m68k/sys/ucontext.h * sysdeps/mips/sys/ucontext.h * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h * sysdeps/unix/sysv/linux/arm/sys/ucontext.h * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h * sysdeps/unix/sysv/linux/mips/sys/ucontext.h * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h * sysdeps/unix/sysv/linux/s390/sys/ucontext.h * sysdeps/unix/sysv/linux/sh/sys/ucontext.h * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h * sysdeps/unix/sysv/linux/tile/sys/ucontext.h * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Include both bits/sigcontext.h and bits/sigstack.h. Fix grammar error in comment, if present. * bits/sigstack.h * sysdeps/unix/sysv/linux/aarch64/bits/sigstack.h * sysdeps/unix/sysv/linux/alpha/bits/sigstack.h * sysdeps/unix/sysv/linux/bits/sigstack.h * sysdeps/unix/sysv/linux/ia64/bits/sigstack.h * sysdeps/unix/sysv/linux/mips/bits/sigstack.h * sysdeps/unix/sysv/linux/powerpc/bits/sigstack.h * sysdeps/unix/sysv/linux/sparc/bits/sigstack.h * bits/sigcontext.h * sysdeps/mach/hurd/i386/bits/sigcontext.h * sysdeps/unix/sysv/linux/bits/sigcontext.h * sysdeps/unix/sysv/linux/ia64/bits/sigcontext.h * sysdeps/unix/sysv/linux/sparc/bits/sigcontext.h: Add multiple inclusion guard. Permit inclusion by sys/ucontext.h as well as signal.h, if this was not already allowed. Request definition of size_t if necessary. Minimize semantically-null differences across files.
* Installed-header hygiene (BZ#20366): time.h types.Zack Weinberg2016-09-2351-335/+327
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many headers are expected to expose a subset of the type definitions in time.h. time.h has a whole bunch of messy logic for conditionally defining some its types and structs, but, as best I can tell, this has never worked 100%. In particular, __need_timespec is ineffective if _TIME_H has already been defined, which means that if you compile #include <time.h> #include <sched.h> with e.g. -fsyntax-only -std=c89 -Wall -Wsystem-headers, you will get In file included from test.c:2:0: /usr/include/sched.h:74:57: warning: "struct timespec" declared inside parameter list will not be visible outside of this definition or declaration extern int sched_rr_get_interval (__pid_t __pid, struct timespec *__t) __THROW; ^~~~~~~~ And if you want to _use_ sched_rr_get_interval in a TU compiled that way, you're hosed. This patch replaces all of that with small bits/types/TYPE.h headers as introduced earlier. time.h and bits/time.h are now *much* simpler, and a lot of other headers are slightly simpler. * time/time.h, bits/time.h, sysdeps/unix/sysv/linux/bits/time.h: Remove all logic conditional on __need macros. Move all the conditionally defined types to their own headers... * time/bits/types/clock_t.h: Define clock_t here. * time/bits/types/clockid_t.h: Define clockid_t here. * time/bits/types/struct_itimerspec.h: Define struct itimerspec here. * time/bits/types/struct_timespec.h: Define struct timespec here. * time/bits/types/struct_timeval.h: Define struct timeval here. * time/bits/types/struct_tm.h: Define struct tm here. * time/bits/types/time_t.h: Define time_t here. * time/bits/types/timer_t.h: Define timer_t here. * time/Makefile: Install the new headers. * bits/resource.h, io/fcntl.h, io/sys/poll.h, io/sys/stat.h * io/utime.h, misc/sys/select.h, posix/sched.h, posix/sys/times.h * posix/sys/types.h, resolv/netdb.h, rt/aio.h, rt/mqueue.h * signal/signal.h, pthread/semaphore.h, sysdeps/nptl/pthread.h * sysdeps/unix/sysv/linux/alpha/bits/resource.h * sysdeps/unix/sysv/linux/alpha/sys/acct.h * sysdeps/unix/sysv/linux/bits/resource.h * sysdeps/unix/sysv/linux/bits/timex.h * sysdeps/unix/sysv/linux/mips/bits/resource.h * sysdeps/unix/sysv/linux/net/ppp_defs.h * sysdeps/unix/sysv/linux/sparc/bits/resource.h * sysdeps/unix/sysv/linux/sys/acct.h * sysdeps/unix/sysv/linux/sys/timerfd.h * sysvipc/sys/msg.h, sysvipc/sys/sem.h, sysvipc/sys/shm.h * time/sys/time.h, time/sys/timeb.h Use the new bits/types headers. * include/time.h: Remove __need logic. * include/bits/time.h * include/bits/types/clock_t.h, include/bits/types/clockid_t.h * include/bits/types/time_t.h, include/bits/types/timer_t.h * include/bits/types/struct_itimerspec.h * include/bits/types/struct_timespec.h * include/bits/types/struct_timeval.h * include/bits/types/struct_tm.h: New wrapper headers.
* Installed-header hygiene (BZ#20366): conditionally defined structures.Zack Weinberg2016-09-239-8/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several network-related structures are defined conditionally under __USE_MISC, but unconditionally used by other headers. The path of least resistance is usually to condition the uses on __USE_MISC as well. * sysdeps/mach/hurd/net/if_ppp.h * sysdeps/unix/sysv/linux/net/if_ppp.h: Only define struct ifpppstatsreq and struct ifpppcstatsreq if __USE_MISC is defined, to ensure struct ifreq is declared. * inet/netinet/ether.h: Condition all function prototypes on __USE_MISC, to ensure struct ether_addr is declared. sys/socket.h defines struct osockaddr only under __USE_MISC, whereas protocols/talkd.h requires it unconditionally. Here it doesn't make sense to condition the entire body of protocols/talkd.h on __USE_MISC. Rather than complicate sys/socket.h with a __need macro or duplicate the definition, I am introducing a new concept: tiny headers named bits/types/TYPE.h that define TYPE and nothing else. This can, I hope, ultimately replace *all* the __need macros. The guard macro for such headers will be __TYPE_defined, just in case application or third-party library code is looking at them. * socket/bits/types/struct_osockaddr.h: New header. * include/bits/types/struct_osockaddr.h: New wrapper. * socket/Makefile: Install the new header. * socket/sys/socket.h, inet/protocols/talkd.h: Refer to bits/types/struct_osockaddr.h for the definition of struct osockaddr.
* Installed-header hygiene (BZ#20366): obsolete BSD u_* types.Zack Weinberg2016-09-2337-431/+517
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The types u_char, u_short, u_int, u_long, ushort, uint, ulong, u_int8_t, u_int16_t, u_int32_t, u_int64_t, quad_t, and u_quad_t are BSDisms that have never been standardized. While glibc should continue to *provide* these types for compatibility's sake, its public headers should not use them. The meat of this change was mechanically generated by the following shell command: perl -pi~ -e ' s/\b(__)?u_char\b/unsigned char/g; s/\b(__)?u_?short\b/unsigned short/g; s/\b(__)?u_?int\b/unsigned int/g; s/\b(__)?u_?long\b/unsigned long/g; s/\b(__)?u_int8_t\b/uint8_t/g; s/\b(__)?u_int16_t\b/uint16_t/g; s/\b(__)?u_int32_t\b/uint32_t/g; s/\b(__)?u_int64_t\b/uint64_t/g; s/\b(__)?u_quad_t\b/uint64_t/g; s/\b(__)?quad_t\b/uint64_t/g; ' $(grep -lE -e '\<((__)?(quad_t|u(short|int|long|_(char|short|int([0-9]+_t)?|long|quad_t))))\>' \ $(grep -LE '\<(_(SYS|BITS)_TYPES_H|rpc/(rpc|rpc_msg|types|xdr)\.h)\>' \ $(find . \( -false $(sed 's/^/-o -name /' all-installed-headers) \ \) -printf '%P\n' | sort -u))) where 'all-installed-headers' was a list of the basenames of all installed header files, manually extracted from the Makefiles. Non-installed wrapper headers in include/ are also adjusted, for consistency. I then manually fixed up indentation and line-wrapping. sys/types.h and bits/types.h are excluded because they must continue to define the u_* types (under __USE_MISC) for compatibility with applications. They do not use these types themselves. All headers that (transitively) include rpc/types.h are also excluded, for three reasons. First, the u_* types are defined by rpc/types.h, unconditionally (not just under __USE_MISC) so they are logically part of the SunRPC API. Second, many of those headers appear to be machine-generated. Third, it's my understanding that we are getting rid of as much of SunRPC as possible in the near future. (The one file under sunrpc/ that's touched, sunrpc/rpc/rpc_des.h, does *not* include rpc/types.h. This may itself be a bug.) After changing from u_intNN_t to uintNN_t, a number of headers now need to include stdint.h to pick up those types. It might be more hygenic, namespace-wise, to use __uintNN_t instead, but none of these headers are bound by ISO or POSIX to do so, and it's unlikely that anyone using them will be bothered. (The two files that were using __-prefixed versions of the u_types, sysdeps/mach/hurd/net/route.h and sysdeps/unix/sysv/linux/net/route.h, both already also contained uses of the unprefixed versions.) Some of these files directly included features.h and/or sys/cdefs.h, which I removed, as the style generally seems to be to let sys/types.h do that for us. (This does not change the set of definitions exposed by any header; sys/types.h unconditionally includes both features.h and sys/cdefs.h.) One file included asm/types.h unnecessarily. * bits/in.h, gmon/sys/gmon.h, inet/netinet/igmp.h * inet/protocols/routed.h, inet/protocols/talkd.h * inet/protocols/timed.h, io/fts.h, nptl_db/thread_db.h * resolv/arpa/nameser.h, resolv/resolv.h, sunrpc/rpc/rpc_des.h * sysdeps/generic/netinet/if_ether.h * sysdeps/generic/netinet/in_systm.h * sysdeps/generic/netinet/ip.h, sysdeps/generic/netinet/tcp.h * sysdeps/gnu/netinet/ip_icmp.h, sysdeps/gnu/netinet/tcp.h * sysdeps/gnu/netinet/udp.h, sysdeps/mach/hurd/net/ethernet.h * sysdeps/mach/hurd/net/if_arp.h * sysdeps/mach/hurd/net/if_ppp.h * sysdeps/mach/hurd/net/route.h, sysdeps/mach/sys/reboot.h * sysdeps/unix/sysv/linux/bits/in.h * sysdeps/unix/sysv/linux/net/ethernet.h * sysdeps/unix/sysv/linux/net/if_arp.h * sysdeps/unix/sysv/linux/net/if_ppp.h * sysdeps/unix/sysv/linux/net/if_shaper.h * sysdeps/unix/sysv/linux/net/route.h * sysdeps/unix/sysv/linux/netinet/if_ether.h * sysdeps/unix/sysv/linux/netinet/if_fddi.h * sysdeps/unix/sysv/linux/netinet/if_tr.h * sysdeps/unix/sysv/linux/netipx/ipx.h * sysdeps/unix/sysv/linux/sys/acct.h * include/arpa/nameser.h, include/resolv.h: Change all uses of u_char to unsigned char, u_short and ushort to unsigned short, u_int and uint to unsigned int, u_long and ulong to unsigned long, u_int8_t to uint8_t, u_int16_t to uint16_t, u_int32_t to uint32_t, quad_t to int64_t, and u_int64_t and u_quad_t to uint64_t. * mach/sys/reboot.h: Remove two casts of integer literals to the types they already have. * bits/in.h: Correct error in description of IP_MULTICAST_LOOP. * sysdeps/unix/sysv/linux/bits/in.h: Likewise. * sysdeps/unix/sysv/linux/netinet/if_ether.h: Change a comment from referring to 'unsigned char' to 'uint8_t' for consistency with the macro definition below. * gmon/sys/gmon.h, inet/netinet/igmp.h, inet/protocols/talkd.h * io/fts.h, resolv/arpa/nameser.h, resolv/resolv.h * sunrpc/rpc/rpc_des.h, sysdeps/generic/netinet/ip.h * sysdeps/gnu/netinet/tcp.h, sysdeps/gnu/netinet/udp.h * sysdeps/mach/hurd/net/if_ppp.h, sysdeps/unix/sysv/linux/net/if_ppp.h * sysdeps/unix/sysv/linux/sys/acct.h * include/arpa/nameser.h, include/resolv.h: Fix indentation disrupted by mechanical edits. * inet/protocols/talkd.h, resolv/arpa/nameser.h * sysdeps/generic/netinet/in_systm.h * sysdeps/gnu/netinet/ip_icmp.h, sysdeps/gnu/netinet/tcp.h * sysdeps/gnu/netinet/udp.h * sysdeps/unix/sysv/linux/net/ethernet.h * sysdeps/unix/sysv/linux/net/if_arp.h * sysdeps/unix/sysv/linux/net/if_ppp.h * sysdeps/unix/sysv/linux/net/if_shaper.h * sysdeps/unix/sysv/linux/netinet/if_fddi.h * sysdeps/unix/sysv/linux/netinet/if_tr.h * sysdeps/unix/sysv/linux/netipx/ipx.h * sysdeps/unix/sysv/linux/sys/acct.h Include stdint.h for uintNN_t definitions. Don't include sys/cdefs.h, features.h, or asm/types.h directly.
* Installed-header hygiene (BZ#20366): Simple self-contained fixes.Zack Weinberg2016-09-2315-40/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some headers did not include all of their prerequisite headers. * rpcsvc/nislib.h: Include rpcsvc/nis.h. * sysdeps/unix/sysv/linux/netrose/rose.h: Include sys/socket.h and netax25/ax25.h. <endian.h> only defines BYTE_ORDER, BIG_ENDIAN, LITTLE_ENDIAN, etc. under __USE_MISC; glibc's headers should use __BYTE_ORDER, __BIG_ENDIAN, __LITTLE_ENDIAN, etc. instead. * inet/netinet/icmp6.h, inet/netinet/ip6.h * resolv/arpa/nameser_compat.h: Use __BYTE_ORDER etc. instead of BYTE_ORDER etc. sys/types.h only conditionally defines caddr_t and clockid_t. * sysdeps/unix/sysv/linux/sys/quota.h: Use __caddr_t instead of caddr_t. * sysdeps/unix/sysv/linux/sys/timerfd.h: Use __clockid_t instead of clockid_t. Remove a #warning that was the sole actual problem with using sys/ipc.h without _GNU_SOURCE/_XOPEN_SOURCE. * sysvipc/sys/ipc.h: Remove unnecessary #warning. _LIBC, __USE_XOPEN2K8, and __STDC_VERSION__ are not always defined. It seems to me that _LIBC should not appear in installed headers, but avoiding that for argp specifically would require more surgery than feels appropriate for this patch set. It's possible that "#ifdef _LIBC" would be sufficient, but I wanted to be conservative. All three versions of bits/socket.h want to know whether __flexarr will produce a real flexible array member -- specifically, one that doesn't alter sizeof(the structure containing it). They were testing for this with a complicated #if condition that did not agree with sys/cdefs.h and that tripped -Wundef warnings under -std=c90. I added a new macro to sys/cdefs.h, __glibc_c99_flexarr_available, which reveals exactly what these headers want to know. I also took the opportunity to flatten the rather messy conditional nest defining __flexarr. * argp/argp.h: Check whether _LIBC is defined before expanding it. * posix/glob.h: Check whether __USE_XOPEN2K8 is defined instead of expanding it. * misc/sys/cdefs.h: Tidy up conditional nest defining __flexarr. Define __glibc_c99_flexarr_available to 1 when the compiler supports C99-compatible flexible array members, 0 otherwise. * sysdeps/unix/sysv/linux/bits/socket.h * sysdeps/mach/hurd/bits/socket.h * bits/socket.h: Use __glibc_c99_flexarr_available in definitions of struct cmsghdr and CMSG_DATA.
* manual: Clarify NSS error reportingFlorian Weimer2016-09-232-15/+38
| | | | | | | The manual already required that NSS implementation functions set error codes if they return a value that is not NSS_STATUS_SUCCESS, but this was not very explicit. The errnop parameter was omitted in a few places, and the function return value was incorrect.
* tst-open-tmpfile: Add checks for open64, openat64, linkatFlorian Weimer2016-09-232-0/+111
| | | | | The /proc/self/fd approach is expected to work for all users (with and without CAP_DAC_READ_SEARCH).
* test-skeleton.c: Remove unintended #include <stdarg.h>.Florian Weimer2016-09-232-1/+4
|
* [PR19826] fix non-LE TLS in static programsAlexandre Oliva2016-09-214-3/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | An earlier fix for TLS dropped early initialization of DTV entries for modules using static TLS, leaving it for __tls_get_addr to set them up. That worked on platforms that require the GD access model to be relaxed to LE in the main executable, but it caused a regression on platforms that allow GD in the main executable, particularly in statically-linked programs: they use a custom __tls_get_addr that does not update the DTV, which fails when the DTV early initialization is not performed. In static programs, __libc_setup_tls performs the DTV initialization for the main thread, but the DTV of other threads is set up in _dl_allocate_tls_init, so that's the fix that matters. Restoring the initialization in the remaining functions modified by this patch was just for uniformity. It's not clear that it is ever needed: even on platforms that allow GD in the main executable, the dynamically-linked version of __tls_get_addr would set up the DTV entries, even for static TLS modules, while updating the DTV counter. for ChangeLog [BZ #19826] * elf/dl-tls.c (_dl_allocate_tls_init): Restore DTV early initialization of static TLS entries. * elf/dl-reloc.c (_dl_nothread_init_static_tls): Likewise. * nptl/allocatestack.c (init_one_static_tls): Likewise.
* hurd: Fix stack pointer corruption in syscallSamuel Thibault2016-09-222-0/+4
| | | | | | Thanks Justus Winter for the report. * sysdeps/mach/i386/syscall.S (syscall): Push back syscall number.
* hurdmalloc: Run fork handler as late as possible [BZ #19431]Samuel Thibault2016-09-224-15/+36
| | | | | | | | | | | | | | | | | | | | | This is the hurd-specific follow-up for 29d794863cd6e03115d3670707cc873a9965ba92 : hurdmalloc also needs the same fix * hurd/hurdmalloc.c (malloc_fork_prepare): Rename to _hurd_malloc_fork_prepare. (malloc_fork_parent): Rename to _hurd_malloc_fork_parent. (malloc_fork_child): Rename to _hurd_malloc_fork_child. (_hurd_fork_prepare_hook): Drop malloc_fork_prepare. (_hurd_fork_parent_hook): Drop malloc_fork_parent. (_hurd_fork_child_hook): Drop malloc_fork_child. * hurd/hurdmalloc.h (_hurd_malloc_fork_prepare, _hurd_malloc_fork_parent, _hurd_malloc_fork_child): Add declarations. * sysdeps/mach/hurd/fork.c (__fork): Call __malloc_fork_lock_parent after locking locks (notably hurd_dtable_lock). Call _hurd_malloc_fork_prepare after that. Call _hurd_malloc_fork_parent before __malloc_fork_unlock_parent and _hurd_malloc_fork_child before __malloc_fork_unlock_child.
* [soft-fp] Add support for various half-precision conversion routines.James Greenhalgh2016-09-218-0/+465
| | | | | | | | | | | | | | | | | | | | | This patch adds conversion routines required for _Float16 support in AArch64. These are one-step conversions to and from TImode and TFmode. We need these on AArch64 regardless of presence of the ARMv8.2-A 16-bit floating-point extensions. In the patch, soft-fp/half.h is derived from soft-fp/single.h . The conversion routines are derivatives of their respective SFmode variants. * soft-fp/extendhftf2.c: New. * soft-fp/fixhfti.c: Likewise. * soft-fp/fixunshfti.c: Likewise. * soft-fp/floattihf.c: Likewise. * soft-fp/floatuntihf.c: Likewise. * soft-fp/half.h: Likewise. * soft-fp/trunctfhf2.c: Likewise.
* Add issubnormal.Joseph Myers2016-09-216-4/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 adds an issubnormal classification macro to <math.h>. This patch implements it for glibc. There are no new underlying functions in libm because the implementation uses fpclassify; any optimizations for this macro should be done through adding __builtin_subnormal in GCC and using it in the header for suitable GCC versions, not through adding other optimized inline or out-of-line versions to glibc. The intended structure of the NEWS entry for <math.h> features from TS 18661-1 is like: * New <math.h> features are added from TS 18661-1:2014: - Nearest integer functions: roundeven, roundevenf, roundevenl. - Comparison macros: iseqsig. - Classification macros: iscanonical, issubnormal, iszero. (that is, following the grouping of interfaces in TS 18661-1:2014, with any group where any interfaces are new in glibc 2.25 being listed like that). Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (issubnormal): New macro. * math/libm-test.inc (issubnormal_test_data): New array. (issubnormal_test): New function. * manual/arith.texi (Floating Point Classes): Document issubnormal. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated.
* Add <stdint.h> integer width macros.Joseph Myers2016-09-217-4/+322
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines macros for the width of integer types, intended for use with the fromfp functions to convert from floating-point types to integer types of any width, in any rounding mode and with control over whether "inexact" is raised. Such macros are, of course, more generally useful than just with those functions. Those macros are added to <limits.h> and <stdint.h>. Having previously added the <limits.h> macros, this patch adds the <stdint.h> ones. I've also added these macros to GCC's headers for GCC 7, but for glibc systems, the definitions in GCC's <stdint.h> will only be used with -ffreestanding. Tested for x86_64 and x86. * sysdeps/generic/stdint.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT8_WIDTH): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT8_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT16_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT16_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT32_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT32_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT64_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT64_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST8_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST8_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST16_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST16_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST32_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST32_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST64_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST64_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST8_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST8_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST16_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST16_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST32_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST32_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST64_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST64_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INTPTR_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINTPTR_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INTMAX_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINTMAX_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (PTRDIFF_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (SIG_ATOMIC_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (SIZE_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (WCHAR_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (WINT_WIDTH): Likewise. * manual/arith.texi (Integers): Document these macros for types specified by width properties. * manual/lang.texi (Width of Type): Document these macros for other standard typedefs. * stdlib/tst-width-stdint.c: New file. * stdlib/Makefile (tests): Add tst-width-stdint.
* resolv: Remove unsupported hook functions from the API [BZ #20016]Florian Weimer2016-09-219-119/+81
|
* malloc: Manual part of conversion to __libc_lockFlorian Weimer2016-09-215-33/+20
| | | | | This removes the old mutex_t-related definitions from malloc-machine.h, too.
* <arpa/nameser.h>: Remove RR type classification macros [BZ #20592]Florian Weimer2016-09-213-11/+13
| | | | | | The macros are no longer up-to-date, and the classification is not useful. In this particular case, removal without prior deprecation seems the right approach.
* <arpa/nameser.h>, <arpa/nameser_compat.h>: Remove versionsFlorian Weimer2016-09-213-20/+6
| | | | Our header files no longer match the BIND versions.
* resolv: Remove the BIND_4_COMPAT macroFlorian Weimer2016-09-213-8/+8
|
* Remove obsolete DNSSEC support [BZ #20591]Florian Weimer2016-09-215-320/+23
| | | | The removed function declaration have never been implemented in libresolv.
* manual: Clarify the documentation of strverscmp [BZ #20524]Florian Weimer2016-09-212-20/+55
|
* Add test case for O_TMPFILE handling in open, openatFlorian Weimer2016-09-214-1/+239
| | | | | Also put xasprintf into test-skeleton.c (written in such a way that including <stdarg.h> is not needed).
* Avoid running $(CXX) during build to obtain header file pathsFlorian Weimer2016-09-215-6/+39
| | | | | This reduces the build time somewhat and is particularly noticeable during rebuilds with few code changes.
* Generate .op pattern rules for profiling builds onlyFlorian Weimer2016-09-212-1/+8
| | | | | | | .op pattern rules are not used in non-profiling builds. This does not cause any changes to both profiling and non-profiling builds.
* sln: Preprocessor cleanupsFlorian Weimer2016-09-212-15/+5
|
* Fix old-style function definitionSamuel Thibault2016-09-202-4/+3
| | | | | * mach/errstring.c (mach_error_type, mach_error_string): Fix old-style function definition.
* mach: Fix old-style function definition.Samuel Thibault2016-09-202-3/+2
| | | | * mach/mach_error.c (mach_error): Fix old-style function definition.
* posix: Correctly block/unblock all signals on Linux posix_spawnAdhemerval Zanella2016-09-202-6/+6
| | | | | | | | | | | | | This patch correctly block and unblocks all signals when executing Linux posix_spawn by using the __libc_signal_{un}block_all functions instead of default sigprocmask. The latter might remove both SIGCANCEL and SIGSETXID from the blocked signal list. Checked on x86_64, i686, powerpc64le, and aarch64. * sysdeps/unix/sysv/linux/spawni.c (__spawnix): Correctly block and unblock all signals when executing the clone vfork child. (SIGALL_SET): Remove macro.
* posix: Correctly enable/disable cancellation on Linux posix_spawnAdhemerval Zanella2016-09-204-3/+188
| | | | | | | | | | | | | | This patch correctly enable and disable asynchronous cancellation on Linux posix_spawn. Current code invert the logic by enabling and disabling instead. It also adds a new test to check if posix_spawn is not a cancellation entrypoint. Checked on x86_64, i686, powerpc64le, and aarch64. * nptl/Makefile (tests): Add tst-exec5. * nptl/tst-exec5.c: New file. * sysdeps/unix/sysv/linux/spawni.c (__spawni): Correctly enable and disable asynchronous cancellation.
* Fix exc2signal.c templateSamuel Thibault2016-09-202-12/+19
| | | | | | | | | As a follow-up to 0e3426bbcf2ff61d06d580fc9362fde79953a281 * hurd/exc2signal.c: #include <hurd/signal.h> (_hurd_exception2signal): Replace 'exception', 'code', 'subcode', 'sigcode', 'error' parameters with 'detail' parameter. Fix code accordingly.
* Build s_nan* objects from a generic templatePaul E. Murphy2016-09-2012-83/+42
| | | | | | | This requires adding a macro to synthesize the call to __strto*_nan. Since this is likely to be the only usage ever for strto* functions in generated libm calls, a dedicated macro is defined for it.
* Remove __nan{f,,l} macrosPaul E. Murphy2016-09-206-11/+12
| | | | | | Use the GCC builtin instead. With the exception of the files built from a template, they are unused. This is preparation for making the s_nanF objects generated.
* Make ldexpF generic.Paul E. Murphy2016-09-209-90/+115
| | | | | | | | | | | | | | | | | This one is a little more tricky since it is built both for libm and libc, and exports multiple aliases. To simplify aliasing, a new macro is introduced which handles aliasing to two symbols. By default, it just applies declare_mgen_alias to both target symbols. Likewise, the makefile is tweaked a little to generate templates for shared files too, and a new rule is added to build m_*.c objects from the objpfx directory. Verified there are no symbol or code changes using a script to diff the *_ldexp* object files on s390x, aarch64, arm, x86_64, and ppc64.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-26 02:00:54 +0000