about summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
...
* Introduce DL_LOOKUP_FOR_RELOCATE flag for _dl_lookup_symbol_xFlorian Weimer2019-11-212-1/+5
| | | | | | | | | | This will allow changes in dependency processing during non-lazy binding, for more precise processing of NODELETE objects: During initial relocation in dlopen, the fate of NODELETE objects is still unclear, so objects which are depended upon by NODELETE objects cannot immediately be marked as NODELETE. Change-Id: Ic7b94a3f7c4719a00ca8e6018088567824da0658
* rtld: Check __libc_enable_secure before honoring LD_PREFER_MAP_32BIT_EXEC ↵Marcin Kościelnicki2019-11-212-2/+7
| | | | | | | | (CVE-2019-19126) [BZ #25204] The problem was introduced in glibc 2.23, in commit b9eb92ab05204df772eb4929eccd018637c9f3e9 ("Add Prefer_MAP_32BIT_EXEC to map executable pages with MAP_32BIT").
* Enhance _dl_catch_exception to allow disabling exception handlingFlorian Weimer2019-11-162-1/+15
| | | | | | | | | | | | In some cases, it is necessary to introduce noexcept regions where raised dynamic loader exceptions (e.g., from lazy binding) are fatal, despite being nested in a code region with an active exception handler. This change enhances _dl_catch_exception with to provide such a capability. The existing function is reused, so that it is not necessary to introduce yet another function with a similar purpose. Change-Id: Iec1bf642ff95a349fdde8040e9baf851ac7b8904
* hurd: Suppress GCC 10 -Warray-bounds warning in init-first.c [BZ #25097]Florian Weimer2019-11-161-0/+9
| | | | | | | The trampoline code should really be rewritten in assembler because this is all very undefined at the C level. Change-Id: Ided58244ca0ee48892519faac5ac222a4e02dec4
* linux: Add comment on affinity set sizes to tst-skeleton-affinity.cFlorian Weimer2019-11-151-0/+5
| | | | Change-Id: Ic6ec48f75f3a0576d3121befd04531382c92afb4
* Avoid zero-length array at the end of struct link_map [BZ #25097]Florian Weimer2019-11-152-12/+23
| | | | | | | | | | | | l_audit ends up as an internal array with _rtld_global, and GCC 10 warns about this. This commit does not change the layout of _rtld_global, so it is suitable for backporting. Future changes could allocate more of the audit state dynamically and remove it from always-allocated data structures, to optimize the common case of inactive auditing. Change-Id: Ic911100730f9124d4ea977ead8e13cee64b84d45
* Introduce link_map_audit_state accessor functionFlorian Weimer2019-11-1510-45/+78
| | | | | | | | | | | | To improve GCC 10 compatibility, it is necessary to remove the l_audit zero-length array from the end of struct link_map. In preparation of that, this commit introduces an accessor function for the audit state, so that it is possible to change the representation of the audit state without adjusting the code that accesses it. Tested on x86_64-linux-gnu. Built on i686-gnu. Change-Id: Id815673c29950fc011ae5301d7cde12624f658df
* Properly initialize audit cookie for the dynamic loader [BZ #25157]Florian Weimer2019-11-1513-9/+290
| | | | | | The l_audit array is indexed by audit module, not audit function. Change-Id: I180eb3573dc1c57433750f5d8cb18271460ba5f2
* nios2: Work around backend bug triggered by csu/libc-tls.c (GCC PR 92499)Florian Weimer2019-11-141-0/+9
| | | | Change-Id: If5df5b05d15f0418af821a9ac8cc0fad53437b10
* Redefine _IO_iconv_t to store a single gconv step pointer [BZ #25097]Florian Weimer2019-11-134-63/+52
| | | | | | | | | | | | | | libio can only deal with gconv conversions which consist of a single step. Not using __gconv_info simplifies the data structures somewhat. This eliminates a new GCC 10 warning about subscribing an inner zero-length array. Tested on x86_64-linux-gnu with mainline GCC. Built with build-many-glibcs.py, also with mainline GCC. Due to GCC PR 92039, there are failures left on 32-bit architectures with float128 support. Change-Id: I8b4c489b619a53154712ff32e1b6f13bb92d4203
* Add new script for plotting string benchmark JSON outputKrzysztof Koch2019-11-131-0/+395
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a script for visualizing the JSON output generated by existing glibc string microbenchmarks. Overview: plot_strings.py is capable of plotting benchmark results in the following formats, which are controlled with the -p or --plot argument: 1. absolute timings (-p time): plot the timings as they are in the input benchmark results file. 2. relative timings (-p rel): plot relative timing difference with respect to a chosen ifunc (controlled with -b argument). 3. performance relative to max (-p max): for each varied parameter value, plot 1/timing as the percentage of the maximum value out of the plotted ifuncs. 4. throughput (-p thru): plot varied parameter value over timing For all types of graphs, there is an option to explicitly specify the subset of ifuncs to plot using the --ifuncs parameter. For plot types 1. and 4. one can hide/expose exact benchmark figures using the --values flag. When plotting relative timing differences between ifuncs, the first ifunc listed in the input JSON file is the baseline, unless the baseline implementation is explicitly chosen with the --baseline parameter. For the ease of reading, the script marks the statistically insignificant range on the graphs. The default is +-5% but this value can be controlled with the --threshold parameter. To accommodate for the heterogeneity in benchmark results files, one can control i.e the x-axis scale, the resolution (dpi) of the generated figures or the key to access the varied parameter value in the JSON file. The corresponding options are --logarithmic, --resolution or --key. The --key parameter ensures that plot_strings.py works with all files which pass JSON schema validation. The schema can be chosen with the --schema parameter. If a window manager is available, one can enable interactive figure display using the --display flag. Finally, one can use the --grid flag to enable grid lines in the generated figures. Implementation: plot_strings.py traverses the JSON tree until a 'results' array is found and generates a separate figure for each such array. The figure is then saved to a file in one of the available formats (controlled with the --extension parameter). As the tree is traversed, the recursive function tracks the metadata about the test being run, so that each figure has a unique and meaningful title and filename. While plot_strings.py works with existing benchmarks, provisions have been made to allow adding more structure and metadata to these benchmarks. Currently, many benchmarks produce multiple timing values for the same value of the varied parameter (typically 'length'). Mutiple data points for the same parameter usually mean that some other parameter was varied as well, for example, if memmove's src and dst buffers overlap or not (see bench-memmove-walk.c and bench-memmove-walk.out). Unfortunately, this information is not exposed in the benchmark output file, so plot_strings.py has to resort to computing the geometric mean of these multiple values. In the process, useful information about the benchmark configuration is lost. Also, averaging the timings for different alignments can hide useful characterstics of the benchmarked ifuncs. Testing: plot_strings.py has been tested on all existing string microbenchmarks which produce results in JSON format. The script was tested on both Windows 10 and Ubuntu 16.04.2 LTS. It runs on both python 2 and 3 (2.7.12 and 3.5.12 tested). Useful commands: 1. Plot timings for all ifuncs in bench-strlen.out: $ ./plot_strings.py bench-strlen.out 2. Display help: $ ./plot_strings.py -h 3. Plot throughput for __memset_avx512_unaligned_erms and __memset_avx512_unaligned. Save the generated figure in pdf format to 'results/'. Use logarithmic x-axis scale, show grid lines and expose the performance numbers: $ ./plot_strings.py bench.out -o results/ -lgv -e pdf -p thru \ -i __memset_avx512_unaligned_erms __memset_avx512_unaligned 4. Plot relative timings for all ifuncs in bench.out with __generic_memset as baseline. Display percentage difference threshold of +-10%: $ ./plot_strings.py bench.out -p rel -b __generic_memset -t 10 Discussion: 1. I would like to propose relaxing the benchout_strings.schema.json to allow specifying either a 'results' array with 'timings' (as before) or a 'variants' array. See below example: { "timing_type": "hp_timing", "functions": { "memcpy": { "bench-variant": "default", "ifuncs": ["generic_memcpy", "__memcpy_thunderx"], "variants": [ { "name": "powers of 2", "variants": [ { "name": "both aligned", "results": [ { "length": 1, "align1": 0, "align2": 0, "timings": [x, y] }, { "length": 2, "align1": 0, "align2": 0, "timings": [x, y] }, ... { "length": 65536, "align1": 0, "align2": 0, "timings": [x, y] }] }, { "name": "dst misaligned", "results": [ { "length": 1, "align1": 0, "align2": 0, "timings": [x, y] }, { "length": 2, "align1": 0, "align2": 1, "timings": [x, y] }, ... 'variants' array consists of objects such that each object has a 'name' attribute to describe the configuration of a particular test in the benchmark. This can be a description, for example, of how the parameter was varied or what was the buffer alignment tested. The 'name' attribute is then followed by another 'variants' array or a 'results' array. The nesting of variants allows arbitrary grouping of benchmark timings, while allowing description of these groups. Using recusion, it is possible to proceduraly create titles and filenames for the figures being generated.
* support: Fix support_set_small_thread_stack_size to build on HurdFlorian Weimer2019-11-131-2/+7
| | | | | | | | | | PTHREAD_STACK_MIN comes from <limits.h>, so include it explicitly. However, it is not defined on Hurd, so compensate for that as well. Built on x86_64-linux-gnu, i686-linux-gnu, i686-gnu. Change-Id: Ifacc888ef86731c2639721b0932ae59583bd6b3e Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
* login: Use pread64 in utmp implementationFlorian Weimer2019-11-121-72/+95
| | | | | | | | | | | | | | | | This reduces the possible error scenarios considerably because no longer can file seek fail, leaving the file descriptor in an inconsistent state and out of sync with the cache. As a result, it is possible to avoid setting file_offset to -1 to make an error persistent. Instead, subsequent calls will retry the operation and report any errors returned by the kernel. This change also avoids reading the file from the start if pututline is called multiple times, to work around lock acquisition failures due to timeouts. Change-Id: If21ea0c162c38830a89331ea93cddec14c0974de
* Clarify purpose of assert in _dl_lookup_symbol_xFlorian Weimer2019-11-121-5/+3
| | | | | | | | | | Only one of the currently defined flags is incompatible with versioned symbol lookups, so it makes sense to check for that flag and not its complement. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com> Change-Id: I3384349cef90cfd91862ebc34a4053f0c0a99404
* aarch64: Increase small and medium cases for __memcpy_genericKrzysztof Koch2019-11-121-35/+47
| | | | | | | | | | | | | | | | | | | | | | | | Increase the upper bound on medium cases from 96 to 128 bytes. Now, up to 128 bytes are copied unrolled. Increase the upper bound on small cases from 16 to 32 bytes so that copies of 17-32 bytes are not impacted by the larger medium case. Benchmarking: The attached figures show relative timing difference with respect to 'memcpy_generic', which is the existing implementation. 'memcpy_med_128' denotes the the version of memcpy_generic with only the medium case enlarged. The 'memcpy_med_128_small_32' numbers are for the version of memcpy_generic submitted in this patch, which has both medium and small cases enlarged. The figures were generated using the script from: https://www.sourceware.org/ml/libc-alpha/2019-10/msg00563.html Depending on the platform, the performance improvement in the bench-memcpy-random.c benchmark ranges from 6% to 20% between the original and final version of memcpy.S Tested against GLIBC testsuite and randomized tests.
* login: Introduce matches_last_entry to utmp processingFlorian Weimer2019-11-121-49/+31
| | | | | | | | | | | This simplifies internal_getut_nolock and fixes a regression, introduced in commit be6b16d975683e6cca57852cd4cfe715b2a9d8b1 ("login: Acquire write lock early in pututline [BZ #24882]") in pututxline because __utmp_equal can only compare process-related utmp entries. Fixes: be6b16d975683e6cca57852cd4cfe715b2a9d8b1 Change-Id: Ib8a85002f7f87ee41590846d16d7e52bdb82f5a5
* slotinfo in struct dtv_slotinfo_list should be flexible array [BZ #25097]Florian Weimer2019-11-126-22/+29
| | | | | | | | | GCC 10 will warn about subscribing inner length zero arrays. Use a GCC extension in csu/libc-tls.c to allocate space for the static_slotinfo variable. Adjust nptl_db so that the type description machinery does not attempt to determine the size of the flexible array member slotinfo. Change-Id: I51be146a7857186a4ede0bb40b332509487bdde8
* Fix clock_nanosleep when interrupted by a signalAdhemerval Zanella2019-11-111-9/+7
| | | | | | | | | | | This patch fixes the time64 support (added by 2e44b10b42d) where it misses the remaining argument updated if __NR_clock_nanosleep returns EINTR. Checked on i686-linux-gnu on 4.15 kernel (no time64 support) and on 5.3 kernel (with time64 support). Reviewed-by: Alistair Francis <alistair23@gmail.com>
* libio/tst-fopenloc: Use xsetlocale, xfopen, and xfcloseArjun Shankar2019-11-111-13/+7
|
* support: Add xsetlocale functionArjun Shankar2019-11-113-0/+32
|
* Declare asctime_r, ctime_r, gmtime_r, localtime_r for C2X.Joseph Myers2019-11-111-4/+4
| | | | | | | | C2X adds the asctime_r, ctime_r, gmtime_r and localtime_r functions. This patch duly adds __GLIBC_USE (ISOC2X) to the conditions under which <time.h> declares them. Tested for x86_64.
* y2038: linux: Provide __ppoll64 implementationLukasz Majewski2019-11-112-5/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides new __ppoll64 explicit 64 bit function for handling polling events (with struct timespec specified timeout) for a set of file descriptors. Moreover, a 32 bit version - __ppoll has been refactored to internally use __ppoll64. The __ppoll is now supposed to be used on systems still supporting 32 bit time (__TIMESIZE != 64) - hence the necessary conversion to 64 bit struct __timespec64. The new ppoll_time64 syscall available from Linux 5.1+ has been used, when applicable. The Linux kernel checks if passed tv_nsec value overflows, so there is no need to repeat it in the glibc. When ppoll syscall on systems supporting 32 bit time ABI is used, the check is performed if passed data (which may have 64 bit tv_sec) fits into 32 bit range. Build tests: - The code has been tested on x86_64/x86 (native compilation): make PARALLELMFLAGS="-j8" && make check PARALLELMFLAGS="-j8" && \\ make xcheck PARALLELMFLAGS="-j8" - The glibc has been build tested (make PARALLELMFLAGS="-j8") for x86 (i386), x86_64-x32, and armv7 Run-time tests: - Run specific tests on ARM/x86 32bit systems (qemu): https://github.com/lmajewski/meta-y2038 and run tests: https://github.com/lmajewski/y2038-tests/commits/master - Use of cross-test-ssh.sh for ARM (armv7): make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck Linux kernel, headers and minimal kernel version for glibc build test matrix: - Linux v5.1 (with ppoll_time64) and glibc build with v5.1 as minimal kernel version (--enable-kernel="5.1.0") The __ASSUME_TIME64_SYSCALLS flag defined. - Linux v5.1 and default minimal kernel version The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports ppoll_time64 syscall. - Linux v4.19 (no ppoll_time64 support) with default minimal kernel version for contemporary glibc This kernel doesn't support ppoll_time64 syscall, so the fallback to ppoll is tested. Above tests were performed with Y2038 redirection applied as well as without (so the __TIMESIZE != 64 execution path is checked as well). No regressions were observed.
* linux: Reduce stack size for nptl/tst-thread-affinity-pthreadFlorian Weimer2019-11-111-1/+4
| | | | | | | | And related tests. These tests create a thread for each core, so they may fail due to address space limitations with the default stack size. Change-Id: Ieef44a7731f58d3b7d6638cce4ccd31126647551
* support: Add support_set_small_thread_stack_sizeFlorian Weimer2019-11-114-0/+94
| | | | | | And support_small_stack_thread_attribute Change-Id: I1cf79a469984f8f30a4a947ee9ec2a5e74de8926
* Fix array bounds violation in regex matcher (bug 25149)Andreas Schwab2019-11-111-2/+5
| | | | | | | | | If the regex has more subexpressions than the number of elements allocated in the regmatch_t array passed to regexec then proceed_next_node may access the regmatch_t array outside its bounds. No testcase added because even without this bug it would then crash in pop_fail_stack which is bug 11053.
* sysdeps/clock_nanosleep: Use clock_nanosleep_time64 if avaliableAlistair Francis2019-11-082-4/+65
| | | | | | The clock_nanosleep syscall is not supported on newer 32-bit platforms (such as RV32). To fix this issue let's use clock_nanosleep_time64 if it is avaliable.
* Remove hppa pthreadP.hAdhemerval Zanella2019-11-081-16/+0
| | | | | | | | | It just contains duplicated defitions provided by other generic nptl headers. Checked with run-built-tests=no against hppa-linux-gnu. Change-Id: I95f55d5b7b7ae528c81cd2394d57ce92398189bf
* login: Acquire write lock early in pututline [BZ #24882]Florian Weimer2019-11-073-31/+238
| | | | | | | | | | | | | It has been reported that due to lack of fairness in POSIX file locking, the current reader-to-writer lock upgrade can result in lack of forward progress. Acquiring the write lock directly hopefully avoids this issue if there are only writers. This also fixes bug 24882 due to the cache revalidation in __libc_pututline. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Change-Id: I57e31ae30719e609a53505a0924dda101d46372e
* nptl: Add missing placeholder abi symbol from nanosleep moveAdhemerval Zanella2019-11-079-0/+9
| | | | | | Adds the __libpthread_version_placeholder symbol with the same version of nanosleep/__nanosleep that was removed by 79a547b162657b3f and that is not provided by other symbols.
* login: Remove double-assignment of fl.l_whence in try_file_lockFlorian Weimer2019-11-071-1/+1
| | | | | | | | | Since l_whence is the second member of struct flock, it is written twice. The double-assignment is technically undefined behavior due to the lack of a sequence point. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Change-Id: I2baf9e70690e723c61051b25ccbd510aec15976c
* hurd: Use __clock_gettime in _hurd_selectFlorian Weimer2019-11-071-7/+4
| | | | | | | | | The __gettimeofday references caused check-localplt failures after commit 5e46749c64d5. Fixes: 5e46749c64d51f50f8511ed99c1266d7c13e182b Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Change-Id: Ia6da4045157a5bbccc67d79e881d7592e6f8a890
* hurd: Remove lingering references to the time functionFlorian Weimer2019-11-071-2/+2
| | | | | | | | They cause a check-localplt failure after commit f9a7554009cf38f39. Fixes: f9a7554009cf38f390e74fcabc5b49f974f72382 Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Change-Id: I37bc20f3449b9e358f32879ed231720c969965b4
* math: enhance the endloop condition of function handle_input_flagliqingqing2019-11-071-1/+1
| | | | | | | | In the function handle_input_flag, the end-loop condition is not correct, because when the loop variable i equals 16 (num_input_flag_types), then input_flags[16] will be out of bounds. (This issue is only relevant with invalid input files to gen-auto-libm-tests.)
* nptl: Refactor thrd_sleep in terms of clock_nanosleepAdhemerval Zanella2019-11-061-12/+9
| | | | | | Checked on x86_64-linux-gnu and powerpc64le-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* Refactor nanosleep in terms of clock_nanosleepAdhemerval Zanella2019-11-067-138/+59
| | | | | | | | | | | | | The generic version is straightforward. For Hurd, its nanosleep implementation is moved to clock_nanosleep with adjustments from generic unix implementation. The generic clock_nanosleep unix version is also removed since it calls nanosleep. Checked on x86_64-linux-gnu and powerpc64le-linux-gnu. Reviewed-by: Florian Weimer <fweimer@redhat.com>
* nptl: Move nanosleep implementation to libcAdhemerval Zanella2019-11-0631-60/+5
| | | | | | | | | Checked on x86_64-linux-gnu and powerpc64le-linux-gnu. I also checked the libpthread.so .gnu.version_d entries for every ABI affected and all of them contains the required versions (including for architectures which exports __nanosleep with a different version). Reviewed-by: Florian Weimer <fweimer@redhat.com>
* posix: Sync regex with gnulibAdhemerval Zanella2019-11-065-114/+49
| | | | | | | | | | | | | It sync with gnulib commit 6cfb4302b3e1da14d706198b693558290e9b00f4 and contains the fixes: https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=32915b2a8a43825720755113bdffe9f67a591748 https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=48f07576b8cd935b48e1050551f45ab1a79b9f01 https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=5e407aba1f775d51b25481cb55f324c9868f62d7 https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=4e02b30c761c76d04057fa5f6bba71401f9310cd https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=79f8ee4e389f8cb1339f8abed9a7d29816e2a2d4 Checked on x86_64-linux-gnu and i686-linux-gnu.
* Add mnw language code [BZ #25139]Mike FABIAN2019-11-061-0/+1
|
* Add new locale: mnw_MM (Mon language spoken in Myanmar) [BZ #25139]Talachan Mon2019-11-063-0/+290
|
* S390: Fp comparison are now raising FE_INVALID with gcc 10.Stefan Liebler2019-11-061-5/+7
| | | | | | | The s390 gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=77918 "S390: Floating point comparisons don't raise invalid for unordered operands." is fixed with gcc 10. Thus we conditionally set FIX_COMPARE_INVALID to 0 or 1.
* linux: pselect: Remove CALL_PSELECT6 macroLukasz Majewski2019-11-051-9/+2
| | | | | | | | Nothing defines CALL_PSELECT6 in the current tree, so remove it. Tested with: - make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8" (x86_64) - scripts/build-many-glibcs.py
* Fix run-one-test so that it runs elf testsArjun Shankar2019-11-051-1/+1
| | | | | | | | | The `test' make target passes a trailing slash in the subdir argument. This does not play well with elf/rtld-Rules which looks for `elf' without any trailing slash, and therefore doesn't find a match when running an elf test individually. This commit removes the trailing slash from the invocation. Reviewed-by: DJ Delorie <dj@redhat.com>
* nptl: Fix niggles with pthread_clockjoin_npMike Crowe2019-11-044-3/+14
| | | | | | | | | | | | | | | | | | | Joseph Myers spotted[1] that 69ca4b54c151cec42ccca5e05790efc1a8206b47 added pthread_clockjoin_np to sysdeps/nptl/pthread.h but not to its hppa-specific equivalent sysdeps/unix/sysv/linux/hppa/pthread.h. Rafal Luzynski spotted[2] typos in the NEWS entry and manual updates too. Florian Weimer spotted[3] that the clockid parameter was not using a reserved identifier in pthread.h. [1] https://sourceware.org/ml/libc-alpha/2019-11/msg00016.html [2] https://sourceware.org/ml/libc-alpha/2019-11/msg00019.html [3] https://sourceware.org/ml/libc-alpha/2019-11/msg00022.html Reviewed-by: Joseph Myers <joseph@codesourcery.com> Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com> Reviewed-by: Florian Weimer <fw@deneb.enyo.de>
* hppa: Align __clone stack argument to 8 bytes (Bug 25066)John David Anglin2019-11-031-2/+7
| | | | | | | | | The hppa architecture requires strict alignment for loads and stores. As a result, the minimum stack alignment that will work is 8 bytes. This patch adjusts __clone() to align the stack argument passed to it. It also adjusts slightly some formatting. This fixes the nptl/tst-tls1 test.
* y2038: linux: Provide __futimens64 implementationLukasz Majewski2019-11-022-3/+26
| | | | | | | | | | | | | | | | | | | This patch provides new __futimens64 explicit 64 bit function for setting access and modification time of file (by using its file descriptor). Moreover, a 32 bit version - __futimens has been refactored to internally use __futimens64. The __futimens is now supposed to be used on systems still supporting 32 bit time (__TIMESIZE != 64) - hence the necessary conversions to 64 bit struct __timespec64. When pointer to struct __timespec64 is NULL - the file access and modification time is set to the current one (by the kernel) and no conversions from struct timespec to __timespec64 are performed. The __futimens64 reuses __utimensat64_helper defined for __utimensat64. The test procedure for __futimens64 is the same as for __utimensat64 conversion patch.
* y2038: linux: Provide __utimensat64 implementationLukasz Majewski2019-11-022-4/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides new __utimensat64 explicit 64 bit function for setting access and modification time of a file. Moreover, a 32 bit version - __utimensat has been refactored to internally use __utimensat64. The __utimensat is now supposed to be used on systems still supporting 32 bit time (__TIMESIZE != 64) - hence the necessary conversions to 64 bit struct __timespec64. When pointer to struct __timespec64 is NULL - the file access and modification time is set to the current one and no conversions from struct timespec to __timespec64 are performed. The new utimensat_time64 syscall available from Linux 5.1+ has been used, when applicable. The new helper function - __utimensat64_helper - has been introduced to facilitate code re-usage on function providing futimens syscall handling. The Linux kernel checks if passed tv_nsec value overflows, so there is no need to repeat it in glibc. When utimensat syscall on systems supporting 32 bit time ABI is used, the check is performed if passed data (which may have 64 bit tv_sec) fits into 32 bit range. Build tests: - The code has been tested on x86_64/x86 (native compilation): make PARALLELMFLAGS="-j8" && make xcheck PARALLELMFLAGS="-j8" - The glibc has been build tested (make PARALLELMFLAGS="-j8") for x86 (i386), x86_64-x32, and armv7 Run-time tests: - Run specific tests on ARM/x86 32bit systems (qemu): https://github.com/lmajewski/meta-y2038 and run tests: https://github.com/lmajewski/y2038-tests/commits/master - Use of cross-test-ssh.sh for ARM (armv7): make PARALLELMFLAGS="-j8" test-wrapper='./cross-test-ssh.sh root@192.168.7.2' xcheck Linux kernel, headers and minimal kernel version for glibc build test matrix: - Linux v5.1 (with utimensat_time64) and glibc build with v5.1 as minimal kernel version (--enable-kernel="5.1.0") The __ASSUME_TIME64_SYSCALLS flag defined. - Linux v5.1 and default minimal kernel version The __ASSUME_TIME64_SYSCALLS not defined, but kernel supports utimensat_time64 syscall. - Linux v4.19 (no utimensat_time64 support) with default minimal kernel version for contemporary glibc This kernel doesn't support utimensat_time64 syscall, so the fallback to utimensat is tested. The above tests were performed with Y2038 redirection applied as well as without (so the __TIMESIZE != 64 execution path is checked as well). No regressions were observed.
* nptl: Add pthread_timedjoin_np, pthread_clockjoin_np NULL timeout testMike Crowe2019-11-012-0/+75
| | | | | | | | | | | Passing NULL as the timeout parameter to pthread_timedjoin_np has resulted in it behaving like pthread_join for a long time. Since that is now the documented behaviour, we ought to test that both it and the new pthread_clockjoin_np support it. Checked on x86_64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Add pthread_clockjoin_npMike Crowe2019-11-0145-28/+235
| | | | | | | | | | | Introduce pthread_clockjoin_np as a version of pthread_timedjoin_np that accepts a clockid_t parameter to indicate which clock the timeout should be measured against. This mirrors the recently-added POSIX-proposed "clock" wait functions. Checked on x86_64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* manual: Add documentation for pthread_tryjoin_np and pthread_timedjoin_npMike Crowe2019-11-011-2/+24
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Convert tst-join3 to use libsupportMike Crowe2019-11-011-66/+20
| | | | | | Checked on x86_64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-23 08:24:45 +0000