diff options
Diffstat (limited to 'sysdeps')
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/memcpy.S | 96 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/strncmp.S | 13 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/strncmp.S | 12 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc64/memcpy.S | 72 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc64/power4/strncmp.S | 13 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc64/strcmp.S | 2 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc64/strcpy.S | 2 |
7 files changed, 104 insertions, 106 deletions
diff --git a/sysdeps/powerpc/powerpc32/power4/memcpy.S b/sysdeps/powerpc/powerpc32/power4/memcpy.S index a11407c3d4..d6c6e6851a 100644 --- a/sysdeps/powerpc/powerpc32/power4/memcpy.S +++ b/sysdeps/powerpc/powerpc32/power4/memcpy.S @@ -24,10 +24,10 @@ /* __ptr_t [r3] memcpy (__ptr_t dst [r3], __ptr_t src [r4], size_t len [r5]); Returns 'dst'. - Memcpy handles short copies (< 32-bytes) using a binary move blocks - (no loops) of lwz/stw. The tail (remaining 1-3) bytes is handled - with the appropriate combination of byte and halfword load/stores. - There is minimal effort to optimize the alignment of short moves. + Memcpy handles short copies (< 32-bytes) using a binary move blocks + (no loops) of lwz/stw. The tail (remaining 1-3) bytes is handled + with the appropriate combination of byte and halfword load/stores. + There is minimal effort to optimize the alignment of short moves. Longer moves (>= 32-bytes) justify the effort to get at least the destination word (4-byte) aligned. Further optimization is @@ -43,7 +43,7 @@ EALIGN (BP_SYM (memcpy), 5, 0) stw 30,20(1) cfi_offset(30,(20-32)) mr 30,3 - cmplwi cr1,5,31 + cmplwi cr1,5,31 stw 31,24(1) cfi_offset(31,(24-32)) neg 0,3 @@ -52,13 +52,13 @@ EALIGN (BP_SYM (memcpy), 5, 0) clrlwi 10,4,30 /* check alignment of src. */ cmplwi cr6,5,8 ble- cr1,.L2 /* If move < 32 bytes use short move code. */ - cmplw cr6,10,11 + cmplw cr6,10,11 mr 12,4 srwi 9,5,2 /* Number of full words remaining. */ mtcrf 0x01,0 mr 31,5 beq .L0 - + subf 31,0,5 /* Move 0-3 bytes as needed to get the destination word aligned. */ 1: bf 31,2f @@ -72,17 +72,17 @@ EALIGN (BP_SYM (memcpy), 5, 0) sth 6,0(3) addi 3,3,2 0: - clrlwi 10,12,30 /* check alignment of src again. */ + clrlwi 10,12,30 /* check alignment of src again. */ srwi 9,31,2 /* Number of full words remaining. */ - - /* Copy words from source to destination, assuming the destination is + + /* Copy words from source to destination, assuming the destination is aligned on a word boundary. At this point we know there are at least 25 bytes left (32-7) to copy. - The next step is to determine if the source is also word aligned. + The next step is to determine if the source is also word aligned. If not branch to the unaligned move code at .L6. which uses a load, shift, store strategy. - + Otherwise source and destination are word aligned, and we can use the optimized word copy loop. */ .L0: @@ -92,16 +92,16 @@ EALIGN (BP_SYM (memcpy), 5, 0) /* Move words where destination and source are word aligned. Use an unrolled loop to copy 4 words (16-bytes) per iteration. - If the copy is not an exact multiple of 16 bytes, 1-3 + If the copy is not an exact multiple of 16 bytes, 1-3 words are copied as needed to set up the main loop. After - the main loop exits there may be a tail of 1-3 bytes. These bytes are + the main loop exits there may be a tail of 1-3 bytes. These bytes are copied a halfword/byte at a time as needed to preserve alignment. */ srwi 8,31,4 /* calculate the 16 byte loop count */ cmplwi cr1,9,4 cmplwi cr6,11,0 mr 11,12 - + bf 30,1f lwz 6,0(12) lwz 7,4(12) @@ -112,7 +112,7 @@ EALIGN (BP_SYM (memcpy), 5, 0) addi 10,3,8 bf 31,4f lwz 0,8(12) - stw 0,8(3) + stw 0,8(3) blt cr1,3f addi 11,12,12 addi 10,3,12 @@ -126,7 +126,7 @@ EALIGN (BP_SYM (memcpy), 5, 0) addi 11,12,4 stw 6,0(3) addi 10,3,4 - + .align 4 4: lwz 6,0(11) @@ -140,14 +140,14 @@ EALIGN (BP_SYM (memcpy), 5, 0) addi 11,11,16 addi 10,10,16 bdnz 4b -3: +3: clrrwi 0,31,2 mtcrf 0x01,31 beq cr6,0f .L9: add 3,3,0 add 12,12,0 - + /* At this point we have a tail of 0-3 bytes and we know that the destination is word aligned. */ 2: bf 30,1f @@ -165,27 +165,27 @@ EALIGN (BP_SYM (memcpy), 5, 0) lwz 31,24(1) addi 1,1,32 blr - -/* Copy up to 31 bytes. This is divided into two cases 0-8 bytes and - 9-31 bytes. Each case is handled without loops, using binary - (1,2,4,8) tests. - + +/* Copy up to 31 bytes. This is divided into two cases 0-8 bytes and + 9-31 bytes. Each case is handled without loops, using binary + (1,2,4,8) tests. + In the short (0-8 byte) case no attempt is made to force alignment - of either source or destination. The hardware will handle the - unaligned load/stores with small delays for crossing 32- 64-byte, and + of either source or destination. The hardware will handle the + unaligned load/stores with small delays for crossing 32- 64-byte, and 4096-byte boundaries. Since these short moves are unlikely to be - unaligned or cross these boundaries, the overhead to force + unaligned or cross these boundaries, the overhead to force alignment is not justified. - + The longer (9-31 byte) move is more likely to cross 32- or 64-byte boundaries. Since only loads are sensitive to the 32-/64-byte - boundaries it is more important to align the source than the + boundaries it is more important to align the source than the destination. If the source is not already word aligned, we first - move 1-3 bytes as needed. While the destination and stores may + move 1-3 bytes as needed. While the destination and stores may still be unaligned, this is only an issue for page (4096 byte - boundary) crossing, which should be rare for these short moves. - The hardware handles this case automatically with a small delay. */ - + boundary) crossing, which should be rare for these short moves. + The hardware handles this case automatically with a small delay. */ + .align 4 .L2: mtcrf 0x01,5 @@ -248,11 +248,11 @@ EALIGN (BP_SYM (memcpy), 5, 0) lwz 6,0(12) addi 12,12,4 stw 6,0(3) - addi 3,3,4 + addi 3,3,4 2: /* Move 2-3 bytes. */ bf 30,1f lhz 6,0(12) - sth 6,0(3) + sth 6,0(3) bf 31,0f lbz 7,2(12) stb 7,2(3) @@ -292,7 +292,7 @@ EALIGN (BP_SYM (memcpy), 5, 0) 6: bf 30,5f lhz 7,4(4) - sth 7,4(3) + sth 7,4(3) bf 31,0f lbz 8,6(4) stb 8,6(3) @@ -301,7 +301,7 @@ EALIGN (BP_SYM (memcpy), 5, 0) addi 1,1,32 blr .align 4 -5: +5: bf 31,0f lbz 6,4(4) stb 6,4(3) @@ -318,15 +318,15 @@ EALIGN (BP_SYM (memcpy), 5, 0) /* Copy words where the destination is aligned but the source is not. Use aligned word loads from the source, shifted to realign - the data, to allow aligned destination stores. + the data, to allow aligned destination stores. Use an unrolled loop to copy 4 words (16-bytes) per iteration. A single word is retained for storing at loop exit to avoid walking off the end of a page within the loop. - If the copy is not an exact multiple of 16 bytes, 1-3 + If the copy is not an exact multiple of 16 bytes, 1-3 words are copied as needed to set up the main loop. After - the main loop exits there may be a tail of 1-3 bytes. These bytes are + the main loop exits there may be a tail of 1-3 bytes. These bytes are copied a halfword/byte at a time as needed to preserve alignment. */ - + cmplwi cr6,11,0 /* are there tail bytes left ? */ subf 5,10,12 /* back up src pointer to prev word alignment */ @@ -381,8 +381,8 @@ EALIGN (BP_SYM (memcpy), 5, 0) .align 4 4: /* copy 16 bytes at a time */ - slw 0,6,10 - srw 8,7,9 + slw 0,6,10 + srw 8,7,9 or 0,0,8 lwz 6,0(5) stw 0,0(4) @@ -391,13 +391,13 @@ EALIGN (BP_SYM (memcpy), 5, 0) or 0,0,8 lwz 7,4(5) stw 0,4(4) - slw 0,6,10 - srw 8,7,9 + slw 0,6,10 + srw 8,7,9 or 0,0,8 lwz 6,8(5) stw 0,8(4) slw 0,7,10 - srw 8,6,9 + srw 8,6,9 or 0,0,8 lwz 7,12(5) stw 0,12(4) @@ -406,8 +406,8 @@ EALIGN (BP_SYM (memcpy), 5, 0) bdnz+ 4b 8: /* calculate and store the final word */ - slw 0,6,10 - srw 8,7,9 + slw 0,6,10 + srw 8,7,9 or 0,0,8 stw 0,0(4) 3: diff --git a/sysdeps/powerpc/powerpc32/power4/strncmp.S b/sysdeps/powerpc/powerpc32/power4/strncmp.S index 70541430d5..12d829344c 100644 --- a/sysdeps/powerpc/powerpc32/power4/strncmp.S +++ b/sysdeps/powerpc/powerpc32/power4/strncmp.S @@ -33,7 +33,7 @@ EALIGN (BP_SYM(strncmp), 4, 0) #define rSTR2 r4 /* second string arg */ #define rN r5 /* max string length */ /* Note: The Bounded pointer support in this code is broken. This code - was inherited from PPC32 and that support was never completed. + was inherited from PPC32 and that support was never completed. Current PPC gcc does not support -fbounds-check or -fbounded-pointers. */ #define rWORD1 r6 /* current word in s1 */ #define rWORD2 r7 /* current word in s2 */ @@ -58,7 +58,7 @@ EALIGN (BP_SYM(strncmp), 4, 0) clrlwi rN, rN, 30 addi rFEFE, rFEFE, -0x101 addi r7F7F, r7F7F, 0x7f7f - cmplwi cr1, rN, 0 + cmplwi cr1, rN, 0 beq L(unaligned) mtctr rTMP /* Power4 wants mtctr 1st in dispatch group. */ @@ -66,7 +66,7 @@ EALIGN (BP_SYM(strncmp), 4, 0) lwz rWORD2, 0(rSTR2) b L(g1) -L(g0): +L(g0): lwzu rWORD1, 4(rSTR1) bne- cr1, L(different) lwzu rWORD2, 4(rSTR2) @@ -76,11 +76,11 @@ L(g1): add rTMP, rFEFE, rWORD1 and. rTMP, rTMP, rNEG cmpw cr1, rWORD1, rWORD2 beq+ L(g0) - + /* OK. We've hit the end of the string. We need to be careful that we don't compare two strings as different because of gunk beyond the end of the strings... */ - + L(endstring): and rTMP, r7F7F, rWORD1 beq cr1, L(equal) @@ -166,7 +166,7 @@ L(u1): b L(u1) L(u3): sub rRTN, rWORD3, rWORD4 - blr + blr L(u4): sub rRTN, rWORD1, rWORD2 blr L(ux): @@ -174,4 +174,3 @@ L(ux): blr END (BP_SYM (strncmp)) libc_hidden_builtin_def (strncmp) - diff --git a/sysdeps/powerpc/powerpc32/strncmp.S b/sysdeps/powerpc/powerpc32/strncmp.S index 0e0e2a1c3e..6b736e7b2d 100644 --- a/sysdeps/powerpc/powerpc32/strncmp.S +++ b/sysdeps/powerpc/powerpc32/strncmp.S @@ -33,7 +33,7 @@ EALIGN (BP_SYM(strncmp), 4, 0) #define rSTR2 r4 /* second string arg */ #define rN r5 /* max string length */ /* Note: The Bounded pointer support in this code is broken. This code - was inherited from PPC32 and that support was never completed. + was inherited from PPC32 and that support was never completed. Current PPC gcc does not support -fbounds-check or -fbounded-pointers. */ #define rWORD1 r6 /* current word in s1 */ #define rWORD2 r7 /* current word in s2 */ @@ -56,7 +56,7 @@ EALIGN (BP_SYM(strncmp), 4, 0) clrlwi rN, rN, 30 addi rFEFE, rFEFE, -0x101 addi r7F7F, r7F7F, 0x7f7f - cmplwi cr1, rN, 0 + cmplwi cr1, rN, 0 beq L(unaligned) mtctr rTMP /* Power4 wants mtctr 1st in dispatch group. */ @@ -64,7 +64,7 @@ EALIGN (BP_SYM(strncmp), 4, 0) lwz rWORD2, 0(rSTR2) b L(g1) -L(g0): +L(g0): lwzu rWORD1, 4(rSTR1) bne- cr1, L(different) lwzu rWORD2, 4(rSTR2) @@ -74,11 +74,11 @@ L(g1): add rTMP, rFEFE, rWORD1 and. rTMP, rTMP, rNEG cmpw cr1, rWORD1, rWORD2 beq+ L(g0) - + /* OK. We've hit the end of the string. We need to be careful that we don't compare two strings as different because of gunk beyond the end of the strings... */ - + L(endstring): and rTMP, r7F7F, rWORD1 beq cr1, L(equal) @@ -154,7 +154,7 @@ L(u1): lbzu rWORD1, 1(rSTR1) bne+ cr1, L(u0) -L(u2): lbzu rWORD1, -1(rSTR1) +L(u2): lbzu rWORD1, -1(rSTR1) L(u3): sub rRTN, rWORD1, rWORD2 blr END (BP_SYM (strncmp)) diff --git a/sysdeps/powerpc/powerpc64/memcpy.S b/sysdeps/powerpc/powerpc64/memcpy.S index 15869e2ee3..28fc6cf5b4 100644 --- a/sysdeps/powerpc/powerpc64/memcpy.S +++ b/sysdeps/powerpc/powerpc64/memcpy.S @@ -24,10 +24,10 @@ /* __ptr_t [r3] memcpy (__ptr_t dst [r3], __ptr_t src [r4], size_t len [r5]); Returns 'dst'. - Memcpy handles short copies (< 32-bytes) using a binary move blocks - (no loops) of lwz/stw. The tail (remaining 1-3) bytes is handled - with the appropriate combination of byte and halfword load/stores. - There is minimal effort to optimize the alignment of short moves. + Memcpy handles short copies (< 32-bytes) using a binary move blocks + (no loops) of lwz/stw. The tail (remaining 1-3) bytes is handled + with the appropriate combination of byte and halfword load/stores. + There is minimal effort to optimize the alignment of short moves. The 64-bit implementations of POWER3 and POWER4 do a reasonable job of handling unligned load/stores that do not cross 32-byte boundries. @@ -49,13 +49,13 @@ EALIGN (BP_SYM (memcpy), 5, 0) clrldi 10,4,61 /* check alignement of src. */ cmpldi cr6,5,8 ble- cr1,.L2 /* If move < 32 bytes use short move code. */ - cmpld cr6,10,11 + cmpld cr6,10,11 mr 12,4 srdi 9,5,3 /* Number of full double words remaining. */ mtcrf 0x01,0 mr 31,5 beq .L0 - + subf 31,0,5 /* Move 0-7 bytes as needed to get the destination doubleword alligned. */ 1: bf 31,2f @@ -74,17 +74,17 @@ EALIGN (BP_SYM (memcpy), 5, 0) stw 6,0(3) addi 3,3,4 0: - clrldi 10,12,61 /* check alignement of src again. */ + clrldi 10,12,61 /* check alignement of src again. */ srdi 9,31,3 /* Number of full double words remaining. */ - + /* Copy doublewords from source to destination, assumpting the destination is aligned on a doubleword boundary. At this point we know there are at least 25 bytes left (32-7) to copy. - The next step is to determine if the source is also doubleword aligned. + The next step is to determine if the source is also doubleword aligned. If not branch to the unaligned move code at .L6. which uses a load, shift, store strategy. - + Otherwise source and destination are doubleword aligned, and we can the optimized doubleword copy loop. */ .L0: @@ -94,16 +94,16 @@ EALIGN (BP_SYM (memcpy), 5, 0) /* Move doublewords where destination and source are DW aligned. Use a unrolled loop to copy 4 doubleword (32-bytes) per iteration. - If the copy is not an exact multiple of 32 bytes, 1-3 + If the copy is not an exact multiple of 32 bytes, 1-3 doublewords are copied as needed to set up the main loop. After - the main loop exits there may be a tail of 1-7 bytes. These byte are + the main loop exits there may be a tail of 1-7 bytes. These byte are copied a word/halfword/byte at a time as needed to preserve alignment. */ srdi 8,31,5 cmpldi cr1,9,4 cmpldi cr6,11,0 mr 11,12 - + bf 30,1f ld 6,0(12) ld 7,8(12) @@ -114,7 +114,7 @@ EALIGN (BP_SYM (memcpy), 5, 0) addi 10,3,16 bf 31,4f ld 0,16(12) - std 0,16(3) + std 0,16(3) blt cr1,3f addi 11,12,24 addi 10,3,24 @@ -128,7 +128,7 @@ EALIGN (BP_SYM (memcpy), 5, 0) addi 11,12,8 std 6,0(3) addi 10,3,8 - + .align 4 4: ld 6,0(11) @@ -143,7 +143,7 @@ EALIGN (BP_SYM (memcpy), 5, 0) std 0,24(10) addi 10,10,32 bdnz 4b -3: +3: rldicr 0,31,0,60 mtcrf 0x01,31 @@ -151,7 +151,7 @@ EALIGN (BP_SYM (memcpy), 5, 0) .L9: add 3,3,0 add 12,12,0 - + /* At this point we have a tail of 0-7 bytes and we know that the destiniation is double word aligned. */ 4: bf 29,2f @@ -172,29 +172,29 @@ EALIGN (BP_SYM (memcpy), 5, 0) ld 31,-8(1) ld 3,-16(1) blr - -/* Copy up to 31 bytes. This divided into two cases 0-8 bytes and 9-31 - bytes. Each case is handled without loops, using binary (1,2,4,8) - tests. - + +/* Copy up to 31 bytes. This divided into two cases 0-8 bytes and 9-31 + bytes. Each case is handled without loops, using binary (1,2,4,8) + tests. + In the short (0-8 byte) case no attempt is made to force alignment - of either source or destination. The hardware will handle the - unaligned load/stores with small delays for crossing 32- 64-byte, and + of either source or destination. The hardware will handle the + unaligned load/stores with small delays for crossing 32- 64-byte, and 4096-byte boundaries. Since these short moves are unlikely to be - unaligned or cross these boundaries, the overhead to force + unaligned or cross these boundaries, the overhead to force alignment is not justified. - + The longer (9-31 byte) move is more likely to cross 32- or 64-byte boundaries. Since only loads are sensitive to the 32-/64-byte - boundaries it is more important to align the source then the + boundaries it is more important to align the source then the destination. If the source is not already word aligned, we first - move 1-3 bytes as needed. Since we are only word aligned we don't - use double word load/stores to insure that all loads are aligned. + move 1-3 bytes as needed. Since we are only word aligned we don't + use double word load/stores to insure that all loads are aligned. While the destination and stores may still be unaligned, this is only an issue for page (4096 byte boundary) crossing, which should be rare for these short moves. The hardware handles this - case automatically with a small delay. */ - + case automatically with a small delay. */ + .align 4 .L2: mtcrf 0x01,5 @@ -257,11 +257,11 @@ EALIGN (BP_SYM (memcpy), 5, 0) lwz 6,0(12) addi 12,12,4 stw 6,0(3) - addi 3,3,4 + addi 3,3,4 2: /* Move 2-3 bytes. */ bf 30,1f lhz 6,0(12) - sth 6,0(3) + sth 6,0(3) bf 31,0f lbz 7,2(12) stb 7,2(3) @@ -282,7 +282,7 @@ EALIGN (BP_SYM (memcpy), 5, 0) mr 12,4 bne cr6,4f /* Would have liked to use use ld/std here but the 630 processors are - slow for load/store doubles that are not at least word aligned. + slow for load/store doubles that are not at least word aligned. Unaligned Load/Store word execute with only a 1 cycle penaltity. */ lwz 6,0(4) lwz 7,4(4) @@ -298,14 +298,14 @@ EALIGN (BP_SYM (memcpy), 5, 0) 6: bf 30,5f lhz 7,4(4) - sth 7,4(3) + sth 7,4(3) bf 31,0f lbz 8,6(4) stb 8,6(3) ld 3,-16(1) blr .align 4 -5: +5: bf 31,0f lbz 6,4(4) stb 6,4(3) diff --git a/sysdeps/powerpc/powerpc64/power4/strncmp.S b/sysdeps/powerpc/powerpc64/power4/strncmp.S index da358e1e53..5ca53cc16a 100644 --- a/sysdeps/powerpc/powerpc64/power4/strncmp.S +++ b/sysdeps/powerpc/powerpc64/power4/strncmp.S @@ -34,7 +34,7 @@ EALIGN (BP_SYM(strncmp), 4, 0) #define rSTR2 r4 /* second string arg */ #define rN r5 /* max string length */ /* Note: The Bounded pointer support in this code is broken. This code - was inherited from PPC32 and that support was never completed. + was inherited from PPC32 and that support was never completed. Current PPC gcc does not support -fbounds-check or -fbounded-pointers. */ #define rWORD1 r6 /* current word in s1 */ #define rWORD2 r7 /* current word in s2 */ @@ -59,7 +59,7 @@ EALIGN (BP_SYM(strncmp), 4, 0) clrldi rN, rN, 61 addi rFEFE, rFEFE, -0x101 addi r7F7F, r7F7F, 0x7f7f - cmpldi cr1, rN, 0 + cmpldi cr1, rN, 0 beq L(unaligned) mtctr rTMP /* Power4 wants mtctr 1st in dispatch group. */ @@ -70,7 +70,7 @@ EALIGN (BP_SYM(strncmp), 4, 0) add rFEFE, rFEFE, rTMP b L(g1) -L(g0): +L(g0): ldu rWORD1, 8(rSTR1) bne- cr1, L(different) ldu rWORD2, 8(rSTR2) @@ -80,11 +80,11 @@ L(g1): add rTMP, rFEFE, rWORD1 and. rTMP, rTMP, rNEG cmpd cr1, rWORD1, rWORD2 beq+ L(g0) - + /* OK. We've hit the end of the string. We need to be careful that we don't compare two strings as different because of gunk beyond the end of the strings... */ - + L(endstring): and rTMP, r7F7F, rWORD1 beq cr1, L(equal) @@ -170,7 +170,7 @@ L(u1): b L(u1) L(u3): sub rRTN, rWORD3, rWORD4 - blr + blr L(u4): sub rRTN, rWORD1, rWORD2 blr L(ux): @@ -178,4 +178,3 @@ L(ux): blr END (BP_SYM (strncmp)) libc_hidden_builtin_def (strncmp) - diff --git a/sysdeps/powerpc/powerpc64/strcmp.S b/sysdeps/powerpc/powerpc64/strcmp.S index 06cc2cfe42..53d82e3721 100644 --- a/sysdeps/powerpc/powerpc64/strcmp.S +++ b/sysdeps/powerpc/powerpc64/strcmp.S @@ -33,7 +33,7 @@ EALIGN (BP_SYM(strcmp), 4, 0) #define rSTR1 r3 /* first string arg */ #define rSTR2 r4 /* second string arg */ /* Note: The Bounded pointer support in this code is broken. This code - was inherited from PPC32 and that support was never completed. + was inherited from PPC32 and that support was never completed. Current PPC gcc does not support -fbounds-check or -fbounded-pointers. These artifacts are left in the code as a reminder in case we need bounded pointer support in the future. */ diff --git a/sysdeps/powerpc/powerpc64/strcpy.S b/sysdeps/powerpc/powerpc64/strcpy.S index e57eeb30cf..17653b29c7 100644 --- a/sysdeps/powerpc/powerpc64/strcpy.S +++ b/sysdeps/powerpc/powerpc64/strcpy.S @@ -31,7 +31,7 @@ EALIGN (BP_SYM (strcpy), 4, 0) #define rTMP r0 #define rRTN r3 /* incoming DEST arg preserved as result */ /* Note. The Bounded pointer support in this code is broken. This code - was inherited from PPC32 and that support was never completed. + was inherited from PPC32 and that support was never completed. Current PPC gcc does not support -fbounds-check or -fbounded-pointers. These artifacts are left in the code as a reminder in case we need bounded pointer support in the future. */ |