diff options
Diffstat (limited to 'sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S')
-rw-r--r-- | sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S | 164 |
1 files changed, 104 insertions, 60 deletions
diff --git a/sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S b/sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S index 1e0511c79a..1b502b78e4 100644 --- a/sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S +++ b/sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S @@ -58,8 +58,10 @@ #ifndef MOVQ # if VEC_SIZE > 16 # define MOVQ vmovq +# define MOVD vmovd # else # define MOVQ movq +# define MOVD movd # endif #endif @@ -72,9 +74,17 @@ #if defined USE_WITH_EVEX || defined USE_WITH_AVX512 # define END_REG rcx # define LOOP_REG rdi +# define LESS_VEC_REG rax #else # define END_REG rdi # define LOOP_REG rdx +# define LESS_VEC_REG rdi +#endif + +#ifdef USE_XMM_LESS_VEC +# define XMM_SMALL 1 +#else +# define XMM_SMALL 0 #endif #define PAGE_SIZE 4096 @@ -110,8 +120,12 @@ END_CHK (WMEMSET_CHK_SYMBOL (__wmemset_chk, unaligned)) ENTRY (WMEMSET_SYMBOL (__wmemset, unaligned)) shl $2, %RDX_LP - WMEMSET_VDUP_TO_VEC0_AND_SET_RETURN (%esi, %rdi) - jmp L(entry_from_bzero) + WMEMSET_SET_VEC0_AND_SET_RETURN (%esi, %rdi) + WMEMSET_VDUP_TO_VEC0_LOW() + cmpq $VEC_SIZE, %rdx + jb L(less_vec_no_vdup) + WMEMSET_VDUP_TO_VEC0_HIGH() + jmp L(entry_from_wmemset) END (WMEMSET_SYMBOL (__wmemset, unaligned)) #endif @@ -123,7 +137,7 @@ END_CHK (MEMSET_CHK_SYMBOL (__memset_chk, unaligned)) #endif ENTRY (MEMSET_SYMBOL (__memset, unaligned)) - MEMSET_VDUP_TO_VEC0_AND_SET_RETURN (%esi, %rdi) + MEMSET_SET_VEC0_AND_SET_RETURN (%esi, %rdi) # ifdef __ILP32__ /* Clear the upper 32 bits. */ mov %edx, %edx @@ -131,6 +145,8 @@ ENTRY (MEMSET_SYMBOL (__memset, unaligned)) L(entry_from_bzero): cmpq $VEC_SIZE, %rdx jb L(less_vec) + MEMSET_VDUP_TO_VEC0_HIGH() +L(entry_from_wmemset): cmpq $(VEC_SIZE * 2), %rdx ja L(more_2x_vec) /* From VEC and to 2 * VEC. No branch when size == VEC_SIZE. */ @@ -179,27 +195,27 @@ END_CHK (MEMSET_CHK_SYMBOL (__memset_chk, unaligned_erms)) # endif ENTRY_P2ALIGN (MEMSET_SYMBOL (__memset, unaligned_erms), 6) - MEMSET_VDUP_TO_VEC0_AND_SET_RETURN (%esi, %rdi) + MEMSET_SET_VEC0_AND_SET_RETURN (%esi, %rdi) # ifdef __ILP32__ /* Clear the upper 32 bits. */ mov %edx, %edx # endif cmp $VEC_SIZE, %RDX_LP jb L(less_vec) + MEMSET_VDUP_TO_VEC0_HIGH () cmp $(VEC_SIZE * 2), %RDX_LP ja L(stosb_more_2x_vec) - /* From VEC and to 2 * VEC. No branch when size == VEC_SIZE. - */ - VMOVU %VEC(0), (%rax) - VMOVU %VEC(0), -VEC_SIZE(%rax, %rdx) + /* From VEC and to 2 * VEC. No branch when size == VEC_SIZE. */ + VMOVU %VEC(0), (%rdi) + VMOVU %VEC(0), (VEC_SIZE * -1)(%rdi, %rdx) VZEROUPPER_RETURN #endif - .p2align 4,, 10 + .p2align 4,, 4 L(last_2x_vec): #ifdef USE_LESS_VEC_MASK_STORE - VMOVU %VEC(0), (VEC_SIZE * 2 + LOOP_4X_OFFSET)(%rcx) - VMOVU %VEC(0), (VEC_SIZE * 3 + LOOP_4X_OFFSET)(%rcx) + VMOVU %VEC(0), (VEC_SIZE * -2)(%rdi, %rdx) + VMOVU %VEC(0), (VEC_SIZE * -1)(%rdi, %rdx) #else VMOVU %VEC(0), (VEC_SIZE * -2)(%rdi) VMOVU %VEC(0), (VEC_SIZE * -1)(%rdi) @@ -212,6 +228,7 @@ L(last_2x_vec): #ifdef USE_LESS_VEC_MASK_STORE .p2align 4,, 10 L(less_vec): +L(less_vec_no_vdup): /* Less than 1 VEC. */ # if VEC_SIZE != 16 && VEC_SIZE != 32 && VEC_SIZE != 64 # error Unsupported VEC_SIZE! @@ -262,28 +279,18 @@ L(stosb_more_2x_vec): /* Fallthrough goes to L(loop_4x_vec). Tests for memset (2x, 4x] and (4x, 8x] jump to target. */ L(more_2x_vec): - - /* Two different methods of setting up pointers / compare. The - two methods are based on the fact that EVEX/AVX512 mov - instructions take more bytes then AVX2/SSE2 mov instructions. As - well that EVEX/AVX512 machines also have fast LEA_BID. Both - setup and END_REG to avoid complex address mode. For EVEX/AVX512 - this saves code size and keeps a few targets in one fetch block. - For AVX2/SSE2 this helps prevent AGU bottlenecks. */ -#if defined USE_WITH_EVEX || defined USE_WITH_AVX512 - /* If EVEX/AVX512 compute END_REG - (VEC_SIZE * 4 + - LOOP_4X_OFFSET) with LEA_BID. */ - - /* END_REG is rcx for EVEX/AVX512. */ - leaq -(VEC_SIZE * 4 + LOOP_4X_OFFSET)(%rdi, %rdx), %END_REG -#endif - - /* Stores to first 2x VEC before cmp as any path forward will - require it. */ - VMOVU %VEC(0), (%rax) - VMOVU %VEC(0), VEC_SIZE(%rax) + /* Store next 2x vec regardless. */ + VMOVU %VEC(0), (%rdi) + VMOVU %VEC(0), (VEC_SIZE * 1)(%rdi) + /* Two different methods of setting up pointers / compare. The two + methods are based on the fact that EVEX/AVX512 mov instructions take + more bytes then AVX2/SSE2 mov instructions. As well that EVEX/AVX512 + machines also have fast LEA_BID. Both setup and END_REG to avoid complex + address mode. For EVEX/AVX512 this saves code size and keeps a few + targets in one fetch block. For AVX2/SSE2 this helps prevent AGU + bottlenecks. */ #if !(defined USE_WITH_EVEX || defined USE_WITH_AVX512) /* If AVX2/SSE2 compute END_REG (rdi) with ALU. */ addq %rdx, %END_REG @@ -292,6 +299,15 @@ L(more_2x_vec): cmpq $(VEC_SIZE * 4), %rdx jbe L(last_2x_vec) + +#if defined USE_WITH_EVEX || defined USE_WITH_AVX512 + /* If EVEX/AVX512 compute END_REG - (VEC_SIZE * 4 + LOOP_4X_OFFSET) with + LEA_BID. */ + + /* END_REG is rcx for EVEX/AVX512. */ + leaq -(VEC_SIZE * 4 + LOOP_4X_OFFSET)(%rdi, %rdx), %END_REG +#endif + /* Store next 2x vec regardless. */ VMOVU %VEC(0), (VEC_SIZE * 2)(%rax) VMOVU %VEC(0), (VEC_SIZE * 3)(%rax) @@ -355,65 +371,93 @@ L(stosb_local): /* Define L(less_vec) only if not otherwise defined. */ .p2align 4 L(less_vec): + /* Broadcast esi to partial register (i.e VEC_SIZE == 32 broadcast to + xmm). This is only does anything for AVX2. */ + MEMSET_VDUP_TO_VEC0_LOW () +L(less_vec_no_vdup): #endif L(cross_page): #if VEC_SIZE > 32 cmpl $32, %edx - jae L(between_32_63) + jge L(between_32_63) #endif #if VEC_SIZE > 16 cmpl $16, %edx - jae L(between_16_31) + jge L(between_16_31) +#endif +#ifndef USE_XMM_LESS_VEC + MOVQ %XMM0, %rcx #endif - MOVQ %XMM0, %rdi cmpl $8, %edx - jae L(between_8_15) + jge L(between_8_15) cmpl $4, %edx - jae L(between_4_7) + jge L(between_4_7) cmpl $1, %edx - ja L(between_2_3) - jb L(return) - movb %sil, (%rax) - VZEROUPPER_RETURN + jg L(between_2_3) + jl L(between_0_0) + movb %sil, (%LESS_VEC_REG) +L(between_0_0): + ret - /* Align small targets only if not doing so would cross a fetch - line. */ + /* Align small targets only if not doing so would cross a fetch line. + */ #if VEC_SIZE > 32 .p2align 4,, SMALL_MEMSET_ALIGN(MOV_SIZE, RET_SIZE) /* From 32 to 63. No branch when size == 32. */ L(between_32_63): - VMOVU %YMM0, (%rax) - VMOVU %YMM0, -32(%rax, %rdx) + VMOVU %YMM0, (%LESS_VEC_REG) + VMOVU %YMM0, -32(%LESS_VEC_REG, %rdx) VZEROUPPER_RETURN #endif #if VEC_SIZE >= 32 - .p2align 4,, SMALL_MEMSET_ALIGN(MOV_SIZE, RET_SIZE) + .p2align 4,, SMALL_MEMSET_ALIGN(MOV_SIZE, 1) L(between_16_31): /* From 16 to 31. No branch when size == 16. */ - VMOVU %XMM0, (%rax) - VMOVU %XMM0, -16(%rax, %rdx) - VZEROUPPER_RETURN + VMOVU %XMM0, (%LESS_VEC_REG) + VMOVU %XMM0, -16(%LESS_VEC_REG, %rdx) + ret #endif - .p2align 4,, SMALL_MEMSET_ALIGN(3, RET_SIZE) + /* Move size is 3 for SSE2, EVEX, and AVX512. Move size is 4 for AVX2. + */ + .p2align 4,, SMALL_MEMSET_ALIGN(3 + XMM_SMALL, 1) L(between_8_15): /* From 8 to 15. No branch when size == 8. */ - movq %rdi, (%rax) - movq %rdi, -8(%rax, %rdx) - VZEROUPPER_RETURN +#ifdef USE_XMM_LESS_VEC + MOVQ %XMM0, (%rdi) + MOVQ %XMM0, -8(%rdi, %rdx) +#else + movq %rcx, (%LESS_VEC_REG) + movq %rcx, -8(%LESS_VEC_REG, %rdx) +#endif + ret - .p2align 4,, SMALL_MEMSET_ALIGN(2, RET_SIZE) + /* Move size is 2 for SSE2, EVEX, and AVX512. Move size is 4 for AVX2. + */ + .p2align 4,, SMALL_MEMSET_ALIGN(2 << XMM_SMALL, 1) L(between_4_7): /* From 4 to 7. No branch when size == 4. */ - movl %edi, (%rax) - movl %edi, -4(%rax, %rdx) - VZEROUPPER_RETURN +#ifdef USE_XMM_LESS_VEC + MOVD %XMM0, (%rdi) + MOVD %XMM0, -4(%rdi, %rdx) +#else + movl %ecx, (%LESS_VEC_REG) + movl %ecx, -4(%LESS_VEC_REG, %rdx) +#endif + ret - .p2align 4,, SMALL_MEMSET_ALIGN(3, RET_SIZE) + /* 4 * XMM_SMALL for the third mov for AVX2. */ + .p2align 4,, 4 * XMM_SMALL + SMALL_MEMSET_ALIGN(3, 1) L(between_2_3): /* From 2 to 3. No branch when size == 2. */ - movw %di, (%rax) - movb %dil, -1(%rax, %rdx) - VZEROUPPER_RETURN +#ifdef USE_XMM_LESS_VEC + movb %sil, (%rdi) + movb %sil, 1(%rdi) + movb %sil, -1(%rdi, %rdx) +#else + movw %cx, (%LESS_VEC_REG) + movb %sil, -1(%LESS_VEC_REG, %rdx) +#endif + ret END (MEMSET_SYMBOL (__memset, unaligned_erms)) |