diff options
Diffstat (limited to 'sysdeps/unix/sysv/linux/scsi')
| -rw-r--r-- | sysdeps/unix/sysv/linux/scsi/scsi.h | 225 | ||||
| -rw-r--r-- | sysdeps/unix/sysv/linux/scsi/scsi_ioctl.h | 31 | ||||
| -rw-r--r-- | sysdeps/unix/sysv/linux/scsi/sg.h | 276 |
3 files changed, 0 insertions, 532 deletions
diff --git a/sysdeps/unix/sysv/linux/scsi/scsi.h b/sysdeps/unix/sysv/linux/scsi/scsi.h deleted file mode 100644 index 630834a26e..0000000000 --- a/sysdeps/unix/sysv/linux/scsi/scsi.h +++ /dev/null @@ -1,225 +0,0 @@ -/* Copyright (C) 1998-2017 Free Software Foundation, Inc. - This file is part of the GNU C Library. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with the GNU C Library; if not, see - <http://www.gnu.org/licenses/>. */ - -/* - * This header file contains public constants and structures used by - * the scsi code for linux. - */ - -#ifndef _SCSI_SCSI_H -#define _SCSI_SCSI_H 1 - -#include <features.h> - -/* - * SCSI opcodes - */ - -#define TEST_UNIT_READY 0x00 -#define REZERO_UNIT 0x01 -#define REQUEST_SENSE 0x03 -#define FORMAT_UNIT 0x04 -#define READ_BLOCK_LIMITS 0x05 -#define REASSIGN_BLOCKS 0x07 -#define READ_6 0x08 -#define WRITE_6 0x0a -#define SEEK_6 0x0b -#define READ_REVERSE 0x0f -#define WRITE_FILEMARKS 0x10 -#define SPACE 0x11 -#define INQUIRY 0x12 -#define RECOVER_BUFFERED_DATA 0x14 -#define MODE_SELECT 0x15 -#define RESERVE 0x16 -#define RELEASE 0x17 -#define COPY 0x18 -#define ERASE 0x19 -#define MODE_SENSE 0x1a -#define START_STOP 0x1b -#define RECEIVE_DIAGNOSTIC 0x1c -#define SEND_DIAGNOSTIC 0x1d -#define ALLOW_MEDIUM_REMOVAL 0x1e - -#define SET_WINDOW 0x24 -#define READ_CAPACITY 0x25 -#define READ_10 0x28 -#define WRITE_10 0x2a -#define SEEK_10 0x2b -#define WRITE_VERIFY 0x2e -#define VERIFY 0x2f -#define SEARCH_HIGH 0x30 -#define SEARCH_EQUAL 0x31 -#define SEARCH_LOW 0x32 -#define SET_LIMITS 0x33 -#define PRE_FETCH 0x34 -#define READ_POSITION 0x34 -#define SYNCHRONIZE_CACHE 0x35 -#define LOCK_UNLOCK_CACHE 0x36 -#define READ_DEFECT_DATA 0x37 -#define MEDIUM_SCAN 0x38 -#define COMPARE 0x39 -#define COPY_VERIFY 0x3a -#define WRITE_BUFFER 0x3b -#define READ_BUFFER 0x3c -#define UPDATE_BLOCK 0x3d -#define READ_LONG 0x3e -#define WRITE_LONG 0x3f -#define CHANGE_DEFINITION 0x40 -#define WRITE_SAME 0x41 -#define READ_TOC 0x43 -#define LOG_SELECT 0x4c -#define LOG_SENSE 0x4d -#define MODE_SELECT_10 0x55 -#define RESERVE_10 0x56 -#define RELEASE_10 0x57 -#define MODE_SENSE_10 0x5a -#define PERSISTENT_RESERVE_IN 0x5e -#define PERSISTENT_RESERVE_OUT 0x5f -#define MOVE_MEDIUM 0xa5 -#define READ_12 0xa8 -#define WRITE_12 0xaa -#define WRITE_VERIFY_12 0xae -#define SEARCH_HIGH_12 0xb0 -#define SEARCH_EQUAL_12 0xb1 -#define SEARCH_LOW_12 0xb2 -#define READ_ELEMENT_STATUS 0xb8 -#define SEND_VOLUME_TAG 0xb6 -#define WRITE_LONG_2 0xea - -/* - * Status codes - */ - -#define GOOD 0x00 -#define CHECK_CONDITION 0x01 -#define CONDITION_GOOD 0x02 -#define BUSY 0x04 -#define INTERMEDIATE_GOOD 0x08 -#define INTERMEDIATE_C_GOOD 0x0a -#define RESERVATION_CONFLICT 0x0c -#define COMMAND_TERMINATED 0x11 -#define QUEUE_FULL 0x14 - -#define STATUS_MASK 0x3e - -/* - * SENSE KEYS - */ - -#define NO_SENSE 0x00 -#define RECOVERED_ERROR 0x01 -#define NOT_READY 0x02 -#define MEDIUM_ERROR 0x03 -#define HARDWARE_ERROR 0x04 -#define ILLEGAL_REQUEST 0x05 -#define UNIT_ATTENTION 0x06 -#define DATA_PROTECT 0x07 -#define BLANK_CHECK 0x08 -#define COPY_ABORTED 0x0a -#define ABORTED_COMMAND 0x0b -#define VOLUME_OVERFLOW 0x0d -#define MISCOMPARE 0x0e - - -/* - * DEVICE TYPES - */ - -#define TYPE_DISK 0x00 -#define TYPE_TAPE 0x01 -#define TYPE_PROCESSOR 0x03 /* HP scanners use this */ -#define TYPE_WORM 0x04 /* Treated as ROM by our system */ -#define TYPE_ROM 0x05 -#define TYPE_SCANNER 0x06 -#define TYPE_MOD 0x07 /* Magneto-optical disk - - * - treated as TYPE_DISK */ -#define TYPE_MEDIUM_CHANGER 0x08 -#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */ -#define TYPE_NO_LUN 0x7f - -/* - * standard mode-select header prepended to all mode-select commands - * - * moved here from cdrom.h -- kraxel - */ - -struct ccs_modesel_head - { - unsigned char _r1; /* reserved. */ - unsigned char medium; /* device-specific medium type. */ - unsigned char _r2; /* reserved. */ - unsigned char block_desc_length; /* block descriptor length. */ - unsigned char density; /* device-specific density code. */ - unsigned char number_blocks_hi; /* number of blocks in this block - desc. */ - unsigned char number_blocks_med; - unsigned char number_blocks_lo; - unsigned char _r3; - unsigned char block_length_hi; /* block length for blocks in this - desc. */ - unsigned char block_length_med; - unsigned char block_length_lo; - }; - -/* - * MESSAGE CODES - */ - -#define COMMAND_COMPLETE 0x00 -#define EXTENDED_MESSAGE 0x01 -#define EXTENDED_MODIFY_DATA_POINTER 0x00 -#define EXTENDED_SDTR 0x01 -#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */ -#define EXTENDED_WDTR 0x03 -#define SAVE_POINTERS 0x02 -#define RESTORE_POINTERS 0x03 -#define DISCONNECT 0x04 -#define INITIATOR_ERROR 0x05 -#define ABORT 0x06 -#define MESSAGE_REJECT 0x07 -#define NOP 0x08 -#define MSG_PARITY_ERROR 0x09 -#define LINKED_CMD_COMPLETE 0x0a -#define LINKED_FLG_CMD_COMPLETE 0x0b -#define BUS_DEVICE_RESET 0x0c - -#define INITIATE_RECOVERY 0x0f /* SCSI-II only */ -#define RELEASE_RECOVERY 0x10 /* SCSI-II only */ - -#define SIMPLE_QUEUE_TAG 0x20 -#define HEAD_OF_QUEUE_TAG 0x21 -#define ORDERED_QUEUE_TAG 0x22 - -/* - * Here are some scsi specific ioctl commands which are sometimes useful. - */ -/* These are a few other constants only used by scsi devices. */ - -#define SCSI_IOCTL_GET_IDLUN 0x5382 - -/* Used to turn on and off tagged queuing for scsi devices. */ - -#define SCSI_IOCTL_TAGGED_ENABLE 0x5383 -#define SCSI_IOCTL_TAGGED_DISABLE 0x5384 - -/* Used to obtain the host number of a device. */ -#define SCSI_IOCTL_PROBE_HOST 0x5385 - -/* Used to get the bus number for a device. */ -#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386 - -#endif /* scsi/scsi.h */ diff --git a/sysdeps/unix/sysv/linux/scsi/scsi_ioctl.h b/sysdeps/unix/sysv/linux/scsi/scsi_ioctl.h deleted file mode 100644 index a746898c2d..0000000000 --- a/sysdeps/unix/sysv/linux/scsi/scsi_ioctl.h +++ /dev/null @@ -1,31 +0,0 @@ -/* Copyright (C) 1999-2017 Free Software Foundation, Inc. - This file is part of the GNU C Library. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with the GNU C Library; if not, see - <http://www.gnu.org/licenses/>. */ - -#ifndef _SCSI_IOCTL_H -#define _SCSI_IOCTL_H - -/* IOCTLs for SCSI. */ -#define SCSI_IOCTL_SEND_COMMAND 1 /* Send a command to the SCSI host. */ -#define SCSI_IOCTL_TEST_UNIT_READY 2 /* Test if unit is ready. */ -#define SCSI_IOCTL_BENCHMARK_COMMAND 3 -#define SCSI_IOCTL_SYNC 4 /* Request synchronous parameters. */ -#define SCSI_IOCTL_START_UNIT 5 -#define SCSI_IOCTL_STOP_UNIT 6 -#define SCSI_IOCTL_DOORLOCK 0x5380 /* Lock the eject mechanism. */ -#define SCSI_IOCTL_DOORUNLOCK 0x5381 /* Unlock the mechanism. */ - -#endif diff --git a/sysdeps/unix/sysv/linux/scsi/sg.h b/sysdeps/unix/sysv/linux/scsi/sg.h deleted file mode 100644 index 04bbdafc74..0000000000 --- a/sysdeps/unix/sysv/linux/scsi/sg.h +++ /dev/null @@ -1,276 +0,0 @@ -/* Copyright (C) 1997-2017 Free Software Foundation, Inc. - This file is part of the GNU C Library. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with the GNU C Library; if not, see - <http://www.gnu.org/licenses/>. */ - -/* - History: - Started: Aug 9 by Lawrence Foard (entropy@world.std.com), to allow user - process control of SCSI devices. - Development Sponsored by Killy Corp. NY NY -*/ - -#ifndef _SCSI_SG_H -#define _SCSI_SG_H 1 - -#include <features.h> -#define __need_size_t -#include <stddef.h> - - -/* New interface introduced in the 3.x SG drivers follows */ - -/* Same structure as used by readv() Linux system call. It defines one - scatter-gather element. */ -typedef struct sg_iovec -{ - void * iov_base; /* Starting address */ - size_t iov_len; /* Length in bytes */ -} sg_iovec_t; - - -typedef struct sg_io_hdr -{ - int interface_id; /* [i] 'S' for SCSI generic (required) */ - int dxfer_direction; /* [i] data transfer direction */ - unsigned char cmd_len; /* [i] SCSI command length ( <= 16 bytes) */ - unsigned char mx_sb_len; /* [i] max length to write to sbp */ - unsigned short int iovec_count; /* [i] 0 implies no scatter gather */ - unsigned int dxfer_len; /* [i] byte count of data transfer */ - void * dxferp; /* [i], [*io] points to data transfer memory - or scatter gather list */ - unsigned char * cmdp; /* [i], [*i] points to command to perform */ - unsigned char * sbp; /* [i], [*o] points to sense_buffer memory */ - unsigned int timeout; /* [i] MAX_UINT->no timeout (unit: millisec) */ - unsigned int flags; /* [i] 0 -> default, see SG_FLAG... */ - int pack_id; /* [i->o] unused internally (normally) */ - void * usr_ptr; /* [i->o] unused internally */ - unsigned char status; /* [o] scsi status */ - unsigned char masked_status;/* [o] shifted, masked scsi status */ - unsigned char msg_status; /* [o] messaging level data (optional) */ - unsigned char sb_len_wr; /* [o] byte count actually written to sbp */ - unsigned short int host_status; /* [o] errors from host adapter */ - unsigned short int driver_status;/* [o] errors from software driver */ - int resid; /* [o] dxfer_len - actual_transferred */ - unsigned int duration; /* [o] time taken by cmd (unit: millisec) */ - unsigned int info; /* [o] auxiliary information */ -} sg_io_hdr_t; - - -/* Use negative values to flag difference from original sg_header structure. */ -#define SG_DXFER_NONE -1 /* e.g. a SCSI Test Unit Ready command */ -#define SG_DXFER_TO_DEV -2 /* e.g. a SCSI WRITE command */ -#define SG_DXFER_FROM_DEV -3 /* e.g. a SCSI READ command */ -#define SG_DXFER_TO_FROM_DEV -4 /* treated like SG_DXFER_FROM_DEV with the - additional property than during indirect - IO the user buffer is copied into the - kernel buffers before the transfer */ - - -/* following flag values can be "or"-ed together */ -#define SG_FLAG_DIRECT_IO 1 /* default is indirect IO */ -#define SG_FLAG_LUN_INHIBIT 2 /* default is to put device's lun into */ - /* the 2nd byte of SCSI command */ -#define SG_FLAG_NO_DXFER 0x10000 /* no transfer of kernel buffers to/from */ - /* user space (debug indirect IO) */ - -/* The following 'info' values are "or"-ed together. */ -#define SG_INFO_OK_MASK 0x1 -#define SG_INFO_OK 0x0 /* no sense, host nor driver "noise" */ -#define SG_INFO_CHECK 0x1 /* something abnormal happened */ - -#define SG_INFO_DIRECT_IO_MASK 0x6 -#define SG_INFO_INDIRECT_IO 0x0 /* data xfer via kernel buffers (or no xfer) */ -#define SG_INFO_DIRECT_IO 0x2 /* direct IO requested and performed */ -#define SG_INFO_MIXED_IO 0x4 /* part direct, part indirect IO */ - - -/* Request information about a specific SG device, used by - SG_GET_SCSI_ID ioctl (). */ -struct sg_scsi_id { - /* Host number as in "scsi<n>" where 'n' is one of 0, 1, 2 etc. */ - int host_no; - int channel; - /* SCSI id of target device. */ - int scsi_id; - int lun; - /* TYPE_... defined in <scsi/scsi.h>. */ - int scsi_type; - /* Host (adapter) maximum commands per lun. */ - short int h_cmd_per_lun; - /* Device (or adapter) maximum queue length. */ - short int d_queue_depth; - /* Unused, set to 0 for now. */ - int unused[2]; -}; - -/* Used by SG_GET_REQUEST_TABLE ioctl(). */ -typedef struct sg_req_info { - char req_state; /* 0 -> not used, 1 -> written, 2 -> ready to read */ - char orphan; /* 0 -> normal request, 1 -> from interruped SG_IO */ - char sg_io_owned; /* 0 -> complete with read(), 1 -> owned by SG_IO */ - char problem; /* 0 -> no problem detected, 1 -> error to report */ - int pack_id; /* pack_id associated with request */ - void * usr_ptr; /* user provided pointer (in new interface) */ - unsigned int duration; /* millisecs elapsed since written (req_state==1) - or request duration (req_state==2) */ - int unused; -} sg_req_info_t; - - -/* IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow. - [Those that only apply to the SG 2.x drivers are at the end of the file.] - (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) */ - -#define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */ - -/* Used to configure SCSI command transformation layer for ATAPI devices */ -/* Only supported by the ide-scsi driver */ -#define SG_SET_TRANSFORM 0x2204 /* N.B. 3rd arg is not pointer but value: */ - /* 3rd arg = 0 to disable transform, 1 to enable it */ -#define SG_GET_TRANSFORM 0x2205 - -#define SG_SET_RESERVED_SIZE 0x2275 /* request a new reserved buffer size */ -#define SG_GET_RESERVED_SIZE 0x2272 /* actual size of reserved buffer */ - -/* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */ -#define SG_GET_SCSI_ID 0x2276 /* Yields fd's bus, chan, dev, lun + type */ -/* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */ - -/* Override host setting and always DMA using low memory ( <16MB on i386) */ -#define SG_SET_FORCE_LOW_DMA 0x2279 /* 0-> use adapter setting, 1-> force */ -#define SG_GET_LOW_DMA 0x227a /* 0-> use all ram for dma; 1-> low dma ram */ - -/* When SG_SET_FORCE_PACK_ID set to 1, pack_id is input to read() which - tries to fetch a packet with a matching pack_id, waits, or returns EAGAIN. - If pack_id is -1 then read oldest waiting. When ...FORCE_PACK_ID set to 0 - then pack_id ignored by read() and oldest readable fetched. */ -#define SG_SET_FORCE_PACK_ID 0x227b -#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1) */ - -#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */ - -/* Yields max scatter gather tablesize allowed by current host adapter */ -#define SG_GET_SG_TABLESIZE 0x227F /* 0 implies can't do scatter gather */ - -#define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */ - -/* Returns -EBUSY if occupied. 3rd argument pointer to int (see next) */ -#define SG_SCSI_RESET 0x2284 -/* Associated values that can be given to SG_SCSI_RESET follow */ -#define SG_SCSI_RESET_NOTHING 0 -#define SG_SCSI_RESET_DEVICE 1 -#define SG_SCSI_RESET_BUS 2 -#define SG_SCSI_RESET_HOST 3 - -/* synchronous SCSI command ioctl, (only in version 3 interface) */ -#define SG_IO 0x2285 /* similar effect as write() followed by read() */ - -#define SG_GET_REQUEST_TABLE 0x2286 /* yields table of active requests */ - -/* How to treat EINTR during SG_IO ioctl(), only in SG 3.x series */ -#define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */ -#define SG_GET_KEEP_ORPHAN 0x2288 - - -#define SG_SCATTER_SZ (8 * 4096) /* PAGE_SIZE not available to user */ -/* Largest size (in bytes) a single scatter-gather list element can have. - The value must be a power of 2 and <= (PAGE_SIZE * 32) [131072 bytes on - i386]. The minimum value is PAGE_SIZE. If scatter-gather not supported - by adapter then this value is the largest data block that can be - read/written by a single scsi command. The user can find the value of - PAGE_SIZE by calling getpagesize() defined in unistd.h . */ - -#define SG_DEFAULT_RETRIES 1 - -/* Defaults, commented if they differ from original sg driver */ -#define SG_DEF_FORCE_LOW_DMA 0 /* was 1 -> memory below 16MB on i386 */ -#define SG_DEF_FORCE_PACK_ID 0 -#define SG_DEF_KEEP_ORPHAN 0 -#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */ - -/* maximum outstanding requests, write() yields EDOM if exceeded */ -#define SG_MAX_QUEUE 16 - -#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE /* for backward compatibility */ - -/* Alternate style type names, "..._t" variants preferred */ -typedef struct sg_io_hdr Sg_io_hdr; -typedef struct sg_io_vec Sg_io_vec; -typedef struct sg_scsi_id Sg_scsi_id; -typedef struct sg_req_info Sg_req_info; - - -/* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */ -/* The older SG interface based on the 'sg_header' structure follows. */ -/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */ - -#define SG_MAX_SENSE 16 /* this only applies to the sg_header interface */ - -struct sg_header - { - /* Length of incoming packet (including header). */ - int pack_len; - /* Maximal length of expected reply. */ - int reply_len; - /* Id number of packet. */ - int pack_id; - /* 0==ok, otherwise error number. */ - int result; - /* Force 12 byte command length for group 6 & 7 commands. */ - unsigned int twelve_byte:1; - /* SCSI status from target. */ - unsigned int target_status:5; - /* Host status (see "DID" codes). */ - unsigned int host_status:8; - /* Driver status+suggestion. */ - unsigned int driver_status:8; - /* Unused. */ - unsigned int other_flags:10; - /* Output in 3 cases: - when target_status is CHECK_CONDITION or - when target_status is COMMAND_TERMINATED or - when (driver_status & DRIVER_SENSE) is true. */ - unsigned char sense_buffer[SG_MAX_SENSE]; - }; - - -/* IOCTLs: The following are not required (or ignored) when the sg_io_hdr_t - interface is used. They are kept for backward compatibility with - the original and version 2 drivers. */ - -#define SG_SET_TIMEOUT 0x2201 /* Set timeout; *(int *)arg==timeout. */ -#define SG_GET_TIMEOUT 0x2202 /* Get timeout; return timeout. */ - -/* Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q). */ -#define SG_GET_COMMAND_Q 0x2270 /* Yields 0 (queuing off) or 1 (on). */ -#define SG_SET_COMMAND_Q 0x2271 /* Change queuing state with 0 or 1. */ - -/* Turn on error sense trace (1..8), dump this device to log/console (9) - or dump all sg device states ( >9 ) to log/console. */ -#define SG_SET_DEBUG 0x227e /* 0 -> turn off debug */ - -#define SG_NEXT_CMD_LEN 0x2283 /* Override SCSI command length with given - number on the next write() on this file - descriptor. */ - -/* Defaults, commented if they differ from original sg driver */ -#define SG_DEFAULT_TIMEOUT (60*HZ) /* HZ == 'jiffies in 1 second' */ -#define SG_DEF_COMMAND_Q 0 /* command queuing is always on when - the new interface is used */ -#define SG_DEF_UNDERRUN_FLAG 0 - - -#endif /* scsi/sg.h */ |