diff options
Diffstat (limited to 'sysdeps/s390/s390-64/utf8-utf32-z9.c')
| -rw-r--r-- | sysdeps/s390/s390-64/utf8-utf32-z9.c | 508 |
1 files changed, 508 insertions, 0 deletions
diff --git a/sysdeps/s390/s390-64/utf8-utf32-z9.c b/sysdeps/s390/s390-64/utf8-utf32-z9.c new file mode 100644 index 0000000000..17ef8bc890 --- /dev/null +++ b/sysdeps/s390/s390-64/utf8-utf32-z9.c @@ -0,0 +1,508 @@ +/* Conversion between UTF-8 and UTF-32 BE/internal. + + This module uses the Z9-109 variants of the Convert Unicode + instructions. + Copyright (C) 1997-2009 Free Software Foundation, Inc. + + Author: Andreas Krebbel <Andreas.Krebbel@de.ibm.com> + Based on the work by Ulrich Drepper <drepper@cygnus.com>, 1997. + + Thanks to Daniel Appich who covered the relevant performance work + in his diploma thesis. + + This is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#include <dlfcn.h> +#include <stdint.h> +#include <unistd.h> +#include <dl-procinfo.h> +#include <gconv.h> + +/* UTF-32 big endian byte order mark. */ +#define BOM 0x0000feffu + +#define DEFINE_INIT 0 +#define DEFINE_FINI 0 +/* These definitions apply to the UTF-8 to UTF-32 direction. The + software implementation for UTF-8 still supports multibyte + characters up to 6 bytes whereas the hardware variant does not. */ +#define MIN_NEEDED_FROM 1 +#define MAX_NEEDED_FROM 6 +#define MIN_NEEDED_TO 4 +#define FROM_LOOP from_utf8_loop +#define TO_LOOP to_utf8_loop +#define FROM_DIRECTION (dir == from_utf8) +#define PREPARE_LOOP \ + enum direction dir = ((struct utf8_data *) step->__data)->dir; \ + int emit_bom = ((struct utf8_data *) step->__data)->emit_bom; \ + \ + if (emit_bom && !data->__internal_use \ + && data->__invocation_counter == 0) \ + { \ + /* Emit the Byte Order Mark. */ \ + if (__builtin_expect (outbuf + 4 > outend, 0)) \ + return __GCONV_FULL_OUTPUT; \ + \ + put32u (outbuf, BOM); \ + outbuf += 4; \ + } + +/* Direction of the transformation. */ +enum direction +{ + illegal_dir, + to_utf8, + from_utf8 +}; + +struct utf8_data +{ + enum direction dir; + int emit_bom; +}; + + +extern int gconv_init (struct __gconv_step *step); +int +gconv_init (struct __gconv_step *step) +{ + /* Determine which direction. */ + struct utf8_data *new_data; + enum direction dir = illegal_dir; + int emit_bom; + int result; + + emit_bom = (__strcasecmp (step->__to_name, "UTF-32//") == 0); + + if (__strcasecmp (step->__from_name, "ISO-10646/UTF8/") == 0 + && (__strcasecmp (step->__to_name, "UTF-32//") == 0 + || __strcasecmp (step->__to_name, "UTF-32BE//") == 0 + || __strcasecmp (step->__to_name, "INTERNAL") == 0)) + { + dir = from_utf8; + } + else if (__strcasecmp (step->__to_name, "ISO-10646/UTF8/") == 0 + && (__strcasecmp (step->__from_name, "UTF-32BE//") == 0 + || __strcasecmp (step->__from_name, "INTERNAL") == 0)) + { + dir = to_utf8; + } + + result = __GCONV_NOCONV; + if (dir != illegal_dir) + { + new_data = (struct utf8_data *) malloc (sizeof (struct utf8_data)); + + result = __GCONV_NOMEM; + if (new_data != NULL) + { + new_data->dir = dir; + new_data->emit_bom = emit_bom; + step->__data = new_data; + + if (dir == from_utf8) + { + step->__min_needed_from = MIN_NEEDED_FROM; + step->__max_needed_from = MIN_NEEDED_FROM; + step->__min_needed_to = MIN_NEEDED_TO; + step->__max_needed_to = MIN_NEEDED_TO; + } + else + { + step->__min_needed_from = MIN_NEEDED_TO; + step->__max_needed_from = MIN_NEEDED_TO; + step->__min_needed_to = MIN_NEEDED_FROM; + step->__max_needed_to = MIN_NEEDED_FROM; + } + + step->__stateful = 0; + + result = __GCONV_OK; + } + } + + return result; +} + + +extern void gconv_end (struct __gconv_step *data); +void +gconv_end (struct __gconv_step *data) +{ + free (data->__data); +} + +/* The macro for the hardware loop. This is used for both + directions. */ +#define HARDWARE_CONVERT(INSTRUCTION) \ + { \ + register const unsigned char* pInput asm ("8") = inptr; \ + register unsigned long long inlen asm ("9") = inend - inptr; \ + register unsigned char* pOutput asm ("10") = outptr; \ + register unsigned long long outlen asm("11") = outend - outptr; \ + uint64_t cc = 0; \ + \ + asm volatile ("0: " INSTRUCTION " \n\t" \ + " jo 0b \n\t" \ + " ipm %2 \n" \ + : "+a" (pOutput), "+a" (pInput), "+d" (cc), \ + "+d" (outlen), "+d" (inlen) \ + : \ + : "cc", "memory"); \ + \ + inptr = pInput; \ + outptr = pOutput; \ + cc >>= 28; \ + \ + if (cc == 1) \ + { \ + result = __GCONV_FULL_OUTPUT; \ + break; \ + } \ + else if (cc == 2) \ + { \ + result = __GCONV_ILLEGAL_INPUT; \ + break; \ + } \ + } + +/* Conversion function from UTF-8 to UTF-32 internal/BE. */ + +#define MIN_NEEDED_INPUT MIN_NEEDED_FROM +#define MAX_NEEDED_INPUT MAX_NEEDED_FROM +#define MIN_NEEDED_OUTPUT MIN_NEEDED_TO +#define LOOPFCT FROM_LOOP +/* The software routine is copied from gconv_simple.c. */ +#define BODY \ + { \ + if (GLRO (dl_hwcap) & HWCAP_S390_ETF3EH) \ + { \ + HARDWARE_CONVERT ("cu14 %0, %1, 1"); \ + \ + if (inptr != inend) \ + { \ + int i; \ + for (i = 1; inptr + i < inend; ++i) \ + if ((inptr[i] & 0xc0) != 0x80) \ + break; \ + \ + if (__builtin_expect (inptr + i == inend, 1)) \ + { \ + result = __GCONV_INCOMPLETE_INPUT; \ + break; \ + } \ + STANDARD_FROM_LOOP_ERR_HANDLER (i); \ + } \ + continue; \ + } \ + \ + /* Next input byte. */ \ + uint32_t ch = *inptr; \ + \ + if (__builtin_expect (ch < 0x80, 1)) \ + { \ + /* One byte sequence. */ \ + ++inptr; \ + } \ + else \ + { \ + uint_fast32_t cnt; \ + uint_fast32_t i; \ + \ + if (ch >= 0xc2 && ch < 0xe0) \ + { \ + /* We expect two bytes. The first byte cannot be 0xc0 or \ + 0xc1, otherwise the wide character could have been \ + represented using a single byte. */ \ + cnt = 2; \ + ch &= 0x1f; \ + } \ + else if (__builtin_expect ((ch & 0xf0) == 0xe0, 1)) \ + { \ + /* We expect three bytes. */ \ + cnt = 3; \ + ch &= 0x0f; \ + } \ + else if (__builtin_expect ((ch & 0xf8) == 0xf0, 1)) \ + { \ + /* We expect four bytes. */ \ + cnt = 4; \ + ch &= 0x07; \ + } \ + else if (__builtin_expect ((ch & 0xfc) == 0xf8, 1)) \ + { \ + /* We expect five bytes. */ \ + cnt = 5; \ + ch &= 0x03; \ + } \ + else if (__builtin_expect ((ch & 0xfe) == 0xfc, 1)) \ + { \ + /* We expect six bytes. */ \ + cnt = 6; \ + ch &= 0x01; \ + } \ + else \ + { \ + /* Search the end of this ill-formed UTF-8 character. This \ + is the next byte with (x & 0xc0) != 0x80. */ \ + i = 0; \ + do \ + ++i; \ + while (inptr + i < inend \ + && (*(inptr + i) & 0xc0) == 0x80 \ + && i < 5); \ + \ + errout: \ + STANDARD_FROM_LOOP_ERR_HANDLER (i); \ + } \ + \ + if (__builtin_expect (inptr + cnt > inend, 0)) \ + { \ + /* We don't have enough input. But before we report \ + that check that all the bytes are correct. */ \ + for (i = 1; inptr + i < inend; ++i) \ + if ((inptr[i] & 0xc0) != 0x80) \ + break; \ + \ + if (__builtin_expect (inptr + i == inend, 1)) \ + { \ + result = __GCONV_INCOMPLETE_INPUT; \ + break; \ + } \ + \ + goto errout; \ + } \ + \ + /* Read the possible remaining bytes. */ \ + for (i = 1; i < cnt; ++i) \ + { \ + uint32_t byte = inptr[i]; \ + \ + if ((byte & 0xc0) != 0x80) \ + /* This is an illegal encoding. */ \ + break; \ + \ + ch <<= 6; \ + ch |= byte & 0x3f; \ + } \ + \ + /* If i < cnt, some trail byte was not >= 0x80, < 0xc0. \ + If cnt > 2 and ch < 2^(5*cnt-4), the wide character ch could \ + have been represented with fewer than cnt bytes. */ \ + if (i < cnt || (cnt > 2 && (ch >> (5 * cnt - 4)) == 0)) \ + { \ + /* This is an illegal encoding. */ \ + goto errout; \ + } \ + \ + inptr += cnt; \ + } \ + \ + /* Now adjust the pointers and store the result. */ \ + *((uint32_t *) outptr) = ch; \ + outptr += sizeof (uint32_t); \ + } +#define LOOP_NEED_FLAGS + +#define STORE_REST \ + { \ + /* We store the remaining bytes while converting them into the UCS4 \ + format. We can assume that the first byte in the buffer is \ + correct and that it requires a larger number of bytes than there \ + are in the input buffer. */ \ + wint_t ch = **inptrp; \ + size_t cnt, r; \ + \ + state->__count = inend - *inptrp; \ + \ + if (ch >= 0xc2 && ch < 0xe0) \ + { \ + /* We expect two bytes. The first byte cannot be 0xc0 or \ + 0xc1, otherwise the wide character could have been \ + represented using a single byte. */ \ + cnt = 2; \ + ch &= 0x1f; \ + } \ + else if (__builtin_expect ((ch & 0xf0) == 0xe0, 1)) \ + { \ + /* We expect three bytes. */ \ + cnt = 3; \ + ch &= 0x0f; \ + } \ + else if (__builtin_expect ((ch & 0xf8) == 0xf0, 1)) \ + { \ + /* We expect four bytes. */ \ + cnt = 4; \ + ch &= 0x07; \ + } \ + else if (__builtin_expect ((ch & 0xfc) == 0xf8, 1)) \ + { \ + /* We expect five bytes. */ \ + cnt = 5; \ + ch &= 0x03; \ + } \ + else \ + { \ + /* We expect six bytes. */ \ + cnt = 6; \ + ch &= 0x01; \ + } \ + \ + /* The first byte is already consumed. */ \ + r = cnt - 1; \ + while (++(*inptrp) < inend) \ + { \ + ch <<= 6; \ + ch |= **inptrp & 0x3f; \ + --r; \ + } \ + \ + /* Shift for the so far missing bytes. */ \ + ch <<= r * 6; \ + \ + /* Store the number of bytes expected for the entire sequence. */ \ + state->__count |= cnt << 8; \ + \ + /* Store the value. */ \ + state->__value.__wch = ch; \ + } + +#define UNPACK_BYTES \ + { \ + static const unsigned char inmask[5] = { 0xc0, 0xe0, 0xf0, 0xf8, 0xfc }; \ + wint_t wch = state->__value.__wch; \ + size_t ntotal = state->__count >> 8; \ + \ + inlen = state->__count & 255; \ + \ + bytebuf[0] = inmask[ntotal - 2]; \ + \ + do \ + { \ + if (--ntotal < inlen) \ + bytebuf[ntotal] = 0x80 | (wch & 0x3f); \ + wch >>= 6; \ + } \ + while (ntotal > 1); \ + \ + bytebuf[0] |= wch; \ + } + +#define CLEAR_STATE \ + state->__count = 0 + +#include <iconv/loop.c> + +/* Conversion from UTF-32 internal/BE to UTF-8. */ + +#define MIN_NEEDED_INPUT MIN_NEEDED_TO +#define MIN_NEEDED_OUTPUT MIN_NEEDED_FROM +#define MAX_NEEDED_OUTPUT MAX_NEEDED_FROM +#define LOOPFCT TO_LOOP +/* The software routine mimics the S/390 cu41 instruction. */ +#define BODY \ + { \ + if (GLRO (dl_hwcap) & HWCAP_S390_ETF3EH) \ + { \ + HARDWARE_CONVERT ("cu41 %0, %1"); \ + \ + if (inptr != inend) \ + { \ + result = __GCONV_INCOMPLETE_INPUT; \ + break; \ + } \ + continue; \ + } \ + \ + uint32_t wc = *((const uint32_t *) inptr); \ + \ + if (__builtin_expect (wc <= 0x7f, 1)) \ + { \ + /* Single UTF-8 char. */ \ + *outptr = (uint8_t)wc; \ + outptr++; \ + } \ + else if (wc <= 0x7ff) \ + { \ + /* Two UTF-8 chars. */ \ + if (__builtin_expect (outptr + 2 > outend, 0)) \ + { \ + /* Overflow in the output buffer. */ \ + result = __GCONV_FULL_OUTPUT; \ + break; \ + } \ + \ + outptr[0] = 0xc0; \ + outptr[0] |= wc >> 6; \ + \ + outptr[1] = 0x80; \ + outptr[1] |= wc & 0x3f; \ + \ + outptr += 2; \ + } \ + else if (wc <= 0xffff) \ + { \ + /* Three UTF-8 chars. */ \ + if (__builtin_expect (outptr + 3 > outend, 0)) \ + { \ + /* Overflow in the output buffer. */ \ + result = __GCONV_FULL_OUTPUT; \ + break; \ + } \ + outptr[0] = 0xe0; \ + outptr[0] |= wc >> 12; \ + \ + outptr[1] = 0x80; \ + outptr[1] |= (wc >> 6) & 0x3f; \ + \ + outptr[2] = 0x80; \ + outptr[2] |= wc & 0x3f; \ + \ + outptr += 3; \ + } \ + else if (wc <= 0x10ffff) \ + { \ + /* Four UTF-8 chars. */ \ + if (__builtin_expect (outptr + 4 > outend, 0)) \ + { \ + /* Overflow in the output buffer. */ \ + result = __GCONV_FULL_OUTPUT; \ + break; \ + } \ + outptr[0] = 0xf0; \ + outptr[0] |= wc >> 18; \ + \ + outptr[1] = 0x80; \ + outptr[1] |= (wc >> 12) & 0x3f; \ + \ + outptr[2] = 0x80; \ + outptr[2] |= (wc >> 6) & 0x3f; \ + \ + outptr[3] = 0x80; \ + outptr[3] |= wc & 0x3f; \ + \ + outptr += 4; \ + } \ + else \ + { \ + STANDARD_TO_LOOP_ERR_HANDLER (4); \ + } \ + inptr += 4; \ + } +#define LOOP_NEED_FLAGS +#include <iconv/loop.c> + +#include <iconv/skeleton.c> |