about summary refs log tree commit diff
path: root/sysdeps/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'sysdeps/powerpc')
-rw-r--r--sysdeps/powerpc/powerpc64/memcpy.S327
1 files changed, 241 insertions, 86 deletions
diff --git a/sysdeps/powerpc/powerpc64/memcpy.S b/sysdeps/powerpc/powerpc64/memcpy.S
index f3448e0b31..251e1fed80 100644
--- a/sysdeps/powerpc/powerpc64/memcpy.S
+++ b/sysdeps/powerpc/powerpc64/memcpy.S
@@ -24,12 +24,12 @@
 /* __ptr_t [r3] memcpy (__ptr_t dst [r3], __ptr_t src [r4], size_t len [r5]);
    Returns 'dst'.
 
-   Memcpy handles short copies (< 32-bytes) using an unaligned
-   word lwz/stw loop.  The tail (remaining 1-3) bytes is handled with the
-   appropriate combination of byte and halfword load/stores. There is no
-   attempt to optimize the alignment of short moves.  The 64-bit
-   implementations of POWER3 and POWER4 do a reasonable job of handling
-   unligned load/stores that do not cross 32-byte boundries.
+   Memcpy handles short copies (< 32-bytes) using a binary move blocks 
+   (no loops) of lwz/stw.  The tail (remaining 1-3) bytes is handled 
+   with the appropriate combination of byte and halfword load/stores. 
+   There is minimal effort to optimize the alignment of short moves.  
+   The 64-bit implementations of POWER3 and POWER4 do a reasonable job
+   of handling unligned load/stores that do not cross 32-byte boundries.
 
    Longer moves (>= 32-bytes) justify the effort to get at least the
    destination doubleword (8-byte) aligned.  Further optimization is
@@ -39,18 +39,22 @@
 EALIGN (BP_SYM (memcpy), 5, 0)
     cmpldi cr1,5,31
     neg   0,3
-    std   30,-16(1)
+    std   3,-16(1)
     std   31,-8(1)
-    rldicl. 0,0,0,61
+    andi. 11,3,7	/* check alignement of dst.  */
+    clrldi 0,0,61	/* Number of bytes until the 1st doubleword of dst.  */
+    clrldi 10,4,61	/* check alignement of src.  */
+    cmpldi cr6,5,8
+    ble-  cr1,.L2	/* If move < 32 bytes use short move code.  */
+    cmpld cr6,10,11     
     mr    12,4
+    srdi  9,5,3		/* Number of full double words remaining.  */
+    mtcrf 0x01,0
     mr    31,5
-    mr    30,3
-    ble-  cr1,.L2
+    beq   .L0
+  
     subf  31,0,5
-
   /* Move 0-7 bytes as needed to get the destination doubleword alligned.  */
-    beq   0f
-    mtcrf 0x01,0
 1:  bf    31,2f
     lbz   6,0(12)
     addi  12,12,1
@@ -67,88 +71,91 @@ EALIGN (BP_SYM (memcpy), 5, 0)
     stw   6,0(3)
     addi  3,3,4
 0:
+    clrldi 10,12,61	/* check alignement of src again.  */     
+    srdi  9,31,3	/* Number of full double words remaining.  */
+    
   /* Copy doublewords from source to destination, assumpting the
      destination is aligned on a doubleword boundary.
 
-     First verify that there is > 7 bytes to copy and check if the source
-     is also doubleword aligned.  If there are < 8 bytes to copy fall
-     through to the tail byte copy code.  Otherwise if the source and
-     destination are both doubleword aligned use an optimized doubleword
-     copy loop.  Otherwise the source has a different alignment and we use
-     a load, shift, store strategy.  */
-    rldicl. 0,12,0,61
-    cmpldi cr6,31,7
-    ble-  cr6,.L2  /* less than 8 bytes left.  */
-    srdi  11,31,3
-    andi. 10,12,7
-    bne-  0,.L6   /* Source is not DW aligned.  */
-    srdi. 9,31,3
-    mr    10,3
-    mr    11,12
+     At this point we know there are at least 25 bytes left (32-7) to copy.
+     The next step is to determine if the source is also doubleword aligned. 
+     If not branch to the unaligned move code at .L6. which uses
+     a load, shift, store strategy.
+     
+     Otherwise source and destination are doubleword aligned, and we can
+     the optimized doubleword copy loop.  */
+.L0:
+    clrldi	11,31,61
+    mtcrf 0x01,9
+    bne-  cr6,.L6   /* If source is not DW aligned.  */
 
-  /* Move doublewords where destination and source are aligned.
+  /* Move doublewords where destination and source are DW aligned.
      Use a unrolled loop to copy 4 doubleword (32-bytes) per iteration.
-     If the remainder is >0 and < 32 bytes copy 1-3 doublewords.  */
+     If the the copy is not an exact multiple of 32 bytes, 1-3 
+     doublewords are copied as needed to set up the main loop.  After
+     the main loop exits there may be a tail of 1-7 bytes. These byte are 
+     copied a word/halfword/byte at a time as needed to preserve alignment.  */
+
+    srdi  8,31,5
     cmpldi	cr1,9,4
-    beq   0f
-    mtcrf 0x01,9
-    blt   cr1,2f
-    ld    6,0(11)
+    cmpldi	cr6,11,0
+    mr    11,12
+    
+    bf    30,1f
+    ld    6,0(12)
+    ld    7,8(12)
+    addi  11,12,16
+    mtctr 8
+    std   6,0(3)
+    std   7,8(3)
+    addi  10,3,16
+    bf    31,4f
+    ld    0,16(12)
+    std   0,16(3)    
+    blt   cr1,3f
+    addi  11,12,24
+    addi  10,3,24
+    b     4f
+    .align  4
+1:
+    mr    10,3
+    mtctr 8
+    bf    31,4f
+    ld    6,0(12)
+    addi  11,12,8
+    std   6,0(3)
+    addi  10,3,8
+    
     .align  4
 4:
-    ld    7,8(11)
-    addi  9,9,-4
-    std   6,0(10)
-    ld    6,16(11)
-    std   7,8(10)
-    ld    7,24(11)
-    addi  11,11,32
-    cmpldi	cr1,9,4
-    std   6,16(10)
-    blt   cr1,3f
-    ld    6,0(11)
-    std   7,24(10)
-    addi  10,10,32
-    b     4b
-3:  std   7,24(10)
-    addi  10,10,32
-2:  bf    30,1f
     ld    6,0(11)
     ld    7,8(11)
-    addi  11,11,16
+    ld    8,16(11)
+    ld    0,24(11)
+    addi  11,11,32
+2:
     std   6,0(10)
     std   7,8(10)
-    addi  10,10,16
-1:  bf    31,0f
-    ld    6,0(11)
-    addi  11,11,8
-    std   6,0(10)
-    addi  10,10,8
-0:
+    std   8,16(10)
+    std   0,24(10)
+    addi  10,10,32
+    bdnz  4b
+3:  
 
-.L8:
     rldicr 0,31,0,60
-    rldicl 31,31,0,61
+    mtcrf 0x01,31
+    beq   cr6,0f
+.L9:
     add   3,3,0
     add   12,12,0
-
-	/* Copy the tail for up to 31 bytes.  If this is the tail of a longer
-	   copy then the destination will be aligned and the length will be
-	   less than 8.  So it is normally not worth the set-up overhead to
-	   get doubleword aligned and do doubleword load/store.  */
-.L2:
-    mr.   10,31
-    cmpldi	cr1,31,4
-    beq   0f
-    mtcrf 0x01,31
-    blt   cr1,2f
-4:  lwz   6,0(12)
+    
+/*  At this point we have a tail of 0-7 bytes and we know that the
+    destiniation is double word aligned.  */
+4:  bf    29,2f
+    lwz   6,0(12)
     addi  12,12,4
-    addi  10,10,-4
     stw   6,0(3)
-    cmpldi	cr1,10,4
     addi  3,3,4
-    bge   cr1,4b
 2:  bf    30,1f
     lhz   6,0(12)
     addi  12,12,2
@@ -156,14 +163,153 @@ EALIGN (BP_SYM (memcpy), 5, 0)
     addi  3,3,2
 1:  bf    31,0f
     lbz   6,0(12)
-    addi  12,12,1
     stb   6,0(3)
-    addi  3,3,1
 0:
   /* Return original dst pointer.  */
     ld 31,-8(1)
-    mr 3,30
-    ld 30,-16(1)
+    ld 3,-16(1)
+    blr
+       
+/* Copy up to 31 bytes.  This divided into two cases 0-8 bytes and 9-31 
+   bytes.  Each case is handled without loops, using binary (1,2,4,8) 
+   tests.  
+   
+   In the short (0-8 byte) case no attempt is made to force alignment
+   of either source or destination.  The hardware will handle the 
+   unaligned load/stores with small delays for crossing 32- 64-byte, and 
+   4096-byte boundaries. Since these short moves are unlikely to be
+   unaligned or cross these boundaries, the overhead to force 
+   alignment is not justified.
+   
+   The longer (9-31 byte) move is more likely to cross 32- or 64-byte
+   boundaries.  Since only loads are sensitive to the 32-/64-byte
+   boundaries it is more important to align the source then the 
+   destination.  If the source is not already word aligned, we first
+   move 1-3 bytes as needed.  Since we are only word aligned we don't 
+   use double word load/stores to insure that all loads are aligned. 
+   While the destination and stores may still be unaligned, this
+   is only an issue for page (4096 byte boundary) crossing, which
+   should be rare for these short moves.  The hardware handles this
+   case automatically with a small delay.  */ 
+   
+    .align  4
+.L2:
+    mtcrf 0x01,5
+    neg   8,4
+    clrrdi	11,4,2
+    andi. 0,8,3
+    ble   cr6,.LE8	/* Handle moves of 0-8 bytes.  */
+/* At least 9 bytes left.  Get the source word aligned.  */
+    cmpldi	cr1,5,16
+    mr    10,5
+    mr    12,4
+    cmpldi	cr6,0,2
+    beq   .L3	/* If the source is already word aligned skip this.  */
+/* Copy 1-3 bytes to get source address word aligned.  */
+    lwz   6,0(11)
+    subf  10,0,5
+    add   12,4,0
+    blt   cr6,5f
+    srdi  7,6,16
+    bgt	  cr6,3f
+    sth   6,0(3)
+    b     7f
+    .align  4
+3:
+    stb   7,0(3)
+    sth   6,1(3)
+    b     7f
+    .align  4
+5:
+    stb   6,0(3)
+7:
+    cmpldi	cr1,10,16
+    add   3,3,0
+    mtcrf 0x01,10
+    .align  4
+.L3:
+/* At least 6 bytes left and the source is word aligned.  */
+    blt   cr1,8f
+16: /* Move 16 bytes.  */
+    lwz   6,0(12)
+    lwz   7,4(12)
+    stw   6,0(3)
+    lwz   6,8(12)
+    stw   7,4(3)
+    lwz   7,12(12)
+    addi  12,12,16
+    stw   6,8(3)
+    stw   7,12(3)
+    addi  3,3,16
+8:  /* Move 8 bytes.  */
+    bf    28,4f
+    lwz   6,0(12)
+    lwz   7,4(12)
+    addi  12,12,8
+    stw   6,0(3)
+    stw   7,4(3)
+    addi  3,3,8
+4:  /* Move 4 bytes.  */
+    bf    29,2f
+    lwz   6,0(12)
+    addi  12,12,4
+    stw   6,0(3)
+    addi  3,3,4    
+2:  /* Move 2-3 bytes.  */
+    bf    30,1f
+    lhz   6,0(12)
+    sth   6,0(3) 
+    bf    31,0f
+    lbz   7,2(12)
+    stb   7,2(3)
+    ld 3,-16(1)
+    blr
+1:  /* Move 1 byte.  */
+    bf    31,0f
+    lbz   6,0(12)
+    stb   6,0(3)
+0:
+  /* Return original dst pointer.  */
+    ld    3,-16(1)
+    blr
+
+/* Special case to copy 0-8 bytes.  */
+    .align  4
+.LE8:
+    mr    12,4
+    bne   cr6,4f
+/* Would have liked to use use ld/std here but the 630 processors are
+   slow for load/store doubles that are not at least word aligned.  
+   Unaligned Load/Store word execute with only a 1 cycle penaltity.  */
+    lwz   6,0(4)
+    lwz   7,4(4)
+    stw   6,0(3)
+    stw   7,4(3)
+  /* Return original dst pointer.  */
+    ld    3,-16(1)
+    blr
+    .align  4
+4:  bf    29,2b
+    lwz   6,0(4)
+    stw   6,0(3)
+6:
+    bf    30,5f
+    lhz   7,4(4)
+    sth   7,4(3) 
+    bf    31,0f
+    lbz   8,6(4)
+    stb   8,6(3)
+    ld 3,-16(1)
+    blr
+    .align  4
+5:  
+    bf    31,0f
+    lbz   6,4(4)
+    stb   6,4(3)
+    .align  4
+0:
+  /* Return original dst pointer.  */
+    ld    3,-16(1)
     blr
 
     .align  4
@@ -173,27 +319,29 @@ EALIGN (BP_SYM (memcpy), 5, 0)
      not.  Use aligned doubleword loads from the source, shifted to realign
      the data, to allow aligned destination stores.  */
     subf  5,10,12
-    andi. 0,11,1
+    andi. 0,9,1
+    cmpldi cr6,11,0
     sldi  10,10,3
+    mr    11,9
     mr    4,3
     ld    6,0(5)
     ld    7,8(5)
     subfic  9,10,64
     beq   2f
     sld   0,6,10
-    addi  11,11,-1
+    cmpldi  11,1
     mr    6,7
     addi  4,4,-8
-    cmpldi  11,0
+    addi  11,11,-1
     b     1f
 2:  addi  5,5,8
     .align  4
 0:  sld   0,6,10
     srd   8,7,9
-    addi  11,11,-2
+    cmpldi  11,2
     ld    6,8(5)
     or    0,0,8
-    cmpldi  11,0
+    addi  11,11,-2
     std   0,0(4)
     sld   0,7,10
 1:  srd   8,6,9
@@ -204,8 +352,15 @@ EALIGN (BP_SYM (memcpy), 5, 0)
     addi  5,5,16
     addi  4,4,16
     b     0b
+    .align 4
 8:
     std   0,8(4)
-    b .L8
+    rldicr 0,31,0,60
+    mtcrf 0x01,31
+    bne   cr6,.L9	/* If the tail is 0 bytes we are done!  */
+  /* Return original dst pointer.  */
+    ld 31,-8(1)
+    ld 3,-16(1)
+    blr
 END_GEN_TB (BP_SYM (memcpy),TB_TOCLESS)
 libc_hidden_builtin_def (memcpy)