diff options
Diffstat (limited to 'sysdeps/gnu/errlist.c')
-rw-r--r-- | sysdeps/gnu/errlist.c | 1495 |
1 files changed, 0 insertions, 1495 deletions
diff --git a/sysdeps/gnu/errlist.c b/sysdeps/gnu/errlist.c deleted file mode 100644 index 77577bf3e1..0000000000 --- a/sysdeps/gnu/errlist.c +++ /dev/null @@ -1,1495 +0,0 @@ -/* This file is generated from errno.texi by errlist.awk. */ - -#include <errno.h> -#include <libintl.h> - -#ifndef ERR_REMAP -# define ERR_REMAP(n) n -#endif - -#if !defined EMIT_ERR_MAX && !defined ERRLIST_NO_COMPAT -# include <errlist-compat.h> -#endif -#ifdef ERR_MAX -# define ERRLIST_SIZE ERR_MAX + 1 -#else -# define ERR_MAX 0 -# define ERRLIST_SIZE -#endif -const char *const _sys_errlist_internal[ERRLIST_SIZE] = - { - [0] = N_("Success"), -#ifdef EPERM -/* -TRANS Only the owner of the file (or other resource) -TRANS or processes with special privileges can perform the operation. */ - [ERR_REMAP (EPERM)] = N_("Operation not permitted"), -# if EPERM > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPERM -# endif -#endif -#ifdef ENOENT -/* -TRANS This is a ``file doesn't exist'' error -TRANS for ordinary files that are referenced in contexts where they are -TRANS expected to already exist. */ - [ERR_REMAP (ENOENT)] = N_("No such file or directory"), -# if ENOENT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOENT -# endif -#endif -#ifdef ESRCH -/* -TRANS No process matches the specified process ID. */ - [ERR_REMAP (ESRCH)] = N_("No such process"), -# if ESRCH > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ESRCH -# endif -#endif -#ifdef EINTR -/* -TRANS An asynchronous signal occurred and prevented -TRANS completion of the call. When this happens, you should try the call -TRANS again. -TRANS -TRANS You can choose to have functions resume after a signal that is handled, -TRANS rather than failing with @code{EINTR}; see @ref{Interrupted -TRANS Primitives}. */ - [ERR_REMAP (EINTR)] = N_("Interrupted system call"), -# if EINTR > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EINTR -# endif -#endif -#ifdef EIO -/* -TRANS Usually used for physical read or write errors. */ - [ERR_REMAP (EIO)] = N_("Input/output error"), -# if EIO > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EIO -# endif -#endif -#ifdef ENXIO -/* -TRANS The system tried to use the device -TRANS represented by a file you specified, and it couldn't find the device. -TRANS This can mean that the device file was installed incorrectly, or that -TRANS the physical device is missing or not correctly attached to the -TRANS computer. */ - [ERR_REMAP (ENXIO)] = N_("No such device or address"), -# if ENXIO > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENXIO -# endif -#endif -#ifdef E2BIG -/* -TRANS Used when the arguments passed to a new program -TRANS being executed with one of the @code{exec} functions (@pxref{Executing a -TRANS File}) occupy too much memory space. This condition never arises on -TRANS @gnuhurdsystems{}. */ - [ERR_REMAP (E2BIG)] = N_("Argument list too long"), -# if E2BIG > ERR_MAX -# undef ERR_MAX -# define ERR_MAX E2BIG -# endif -#endif -#ifdef ENOEXEC -/* -TRANS Invalid executable file format. This condition is detected by the -TRANS @code{exec} functions; see @ref{Executing a File}. */ - [ERR_REMAP (ENOEXEC)] = N_("Exec format error"), -# if ENOEXEC > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOEXEC -# endif -#endif -#ifdef EBADF -/* -TRANS For example, I/O on a descriptor that has been -TRANS closed or reading from a descriptor open only for writing (or vice -TRANS versa). */ - [ERR_REMAP (EBADF)] = N_("Bad file descriptor"), -# if EBADF > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBADF -# endif -#endif -#ifdef ECHILD -/* -TRANS This error happens on operations that are -TRANS supposed to manipulate child processes, when there aren't any processes -TRANS to manipulate. */ - [ERR_REMAP (ECHILD)] = N_("No child processes"), -# if ECHILD > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ECHILD -# endif -#endif -#ifdef EDEADLK -/* -TRANS Allocating a system resource would have resulted in a -TRANS deadlock situation. The system does not guarantee that it will notice -TRANS all such situations. This error means you got lucky and the system -TRANS noticed; it might just hang. @xref{File Locks}, for an example. */ - [ERR_REMAP (EDEADLK)] = N_("Resource deadlock avoided"), -# if EDEADLK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EDEADLK -# endif -#endif -#ifdef ENOMEM -/* -TRANS The system cannot allocate more virtual memory -TRANS because its capacity is full. */ - [ERR_REMAP (ENOMEM)] = N_("Cannot allocate memory"), -# if ENOMEM > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOMEM -# endif -#endif -#ifdef EACCES -/* -TRANS The file permissions do not allow the attempted operation. */ - [ERR_REMAP (EACCES)] = N_("Permission denied"), -# if EACCES > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EACCES -# endif -#endif -#ifdef EFAULT -/* -TRANS An invalid pointer was detected. -TRANS On @gnuhurdsystems{}, this error never happens; you get a signal instead. */ - [ERR_REMAP (EFAULT)] = N_("Bad address"), -# if EFAULT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EFAULT -# endif -#endif -#ifdef ENOTBLK -/* -TRANS A file that isn't a block special file was given in a situation that -TRANS requires one. For example, trying to mount an ordinary file as a file -TRANS system in Unix gives this error. */ - [ERR_REMAP (ENOTBLK)] = N_("Block device required"), -# if ENOTBLK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTBLK -# endif -#endif -#ifdef EBUSY -/* -TRANS A system resource that can't be shared is already in use. -TRANS For example, if you try to delete a file that is the root of a currently -TRANS mounted filesystem, you get this error. */ - [ERR_REMAP (EBUSY)] = N_("Device or resource busy"), -# if EBUSY > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBUSY -# endif -#endif -#ifdef EEXIST -/* -TRANS An existing file was specified in a context where it only -TRANS makes sense to specify a new file. */ - [ERR_REMAP (EEXIST)] = N_("File exists"), -# if EEXIST > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EEXIST -# endif -#endif -#ifdef EXDEV -/* -TRANS An attempt to make an improper link across file systems was detected. -TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but -TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). */ - [ERR_REMAP (EXDEV)] = N_("Invalid cross-device link"), -# if EXDEV > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EXDEV -# endif -#endif -#ifdef ENODEV -/* -TRANS The wrong type of device was given to a function that expects a -TRANS particular sort of device. */ - [ERR_REMAP (ENODEV)] = N_("No such device"), -# if ENODEV > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENODEV -# endif -#endif -#ifdef ENOTDIR -/* -TRANS A file that isn't a directory was specified when a directory is required. */ - [ERR_REMAP (ENOTDIR)] = N_("Not a directory"), -# if ENOTDIR > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTDIR -# endif -#endif -#ifdef EISDIR -/* -TRANS You cannot open a directory for writing, -TRANS or create or remove hard links to it. */ - [ERR_REMAP (EISDIR)] = N_("Is a directory"), -# if EISDIR > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EISDIR -# endif -#endif -#ifdef EINVAL -/* -TRANS This is used to indicate various kinds of problems -TRANS with passing the wrong argument to a library function. */ - [ERR_REMAP (EINVAL)] = N_("Invalid argument"), -# if EINVAL > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EINVAL -# endif -#endif -#ifdef EMFILE -/* -TRANS The current process has too many files open and can't open any more. -TRANS Duplicate descriptors do count toward this limit. -TRANS -TRANS In BSD and GNU, the number of open files is controlled by a resource -TRANS limit that can usually be increased. If you get this error, you might -TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited; -TRANS @pxref{Limits on Resources}. */ - [ERR_REMAP (EMFILE)] = N_("Too many open files"), -# if EMFILE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EMFILE -# endif -#endif -#ifdef ENFILE -/* -TRANS There are too many distinct file openings in the entire system. Note -TRANS that any number of linked channels count as just one file opening; see -TRANS @ref{Linked Channels}. This error never occurs on @gnuhurdsystems{}. */ - [ERR_REMAP (ENFILE)] = N_("Too many open files in system"), -# if ENFILE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENFILE -# endif -#endif -#ifdef ENOTTY -/* -TRANS Inappropriate I/O control operation, such as trying to set terminal -TRANS modes on an ordinary file. */ - [ERR_REMAP (ENOTTY)] = N_("Inappropriate ioctl for device"), -# if ENOTTY > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTTY -# endif -#endif -#ifdef ETXTBSY -/* -TRANS An attempt to execute a file that is currently open for writing, or -TRANS write to a file that is currently being executed. Often using a -TRANS debugger to run a program is considered having it open for writing and -TRANS will cause this error. (The name stands for ``text file busy''.) This -TRANS is not an error on @gnuhurdsystems{}; the text is copied as necessary. */ - [ERR_REMAP (ETXTBSY)] = N_("Text file busy"), -# if ETXTBSY > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ETXTBSY -# endif -#endif -#ifdef EFBIG -/* -TRANS The size of a file would be larger than allowed by the system. */ - [ERR_REMAP (EFBIG)] = N_("File too large"), -# if EFBIG > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EFBIG -# endif -#endif -#ifdef ENOSPC -/* -TRANS Write operation on a file failed because the -TRANS disk is full. */ - [ERR_REMAP (ENOSPC)] = N_("No space left on device"), -# if ENOSPC > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOSPC -# endif -#endif -#ifdef ESPIPE -/* -TRANS Invalid seek operation (such as on a pipe). */ - [ERR_REMAP (ESPIPE)] = N_("Illegal seek"), -# if ESPIPE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ESPIPE -# endif -#endif -#ifdef EROFS -/* -TRANS An attempt was made to modify something on a read-only file system. */ - [ERR_REMAP (EROFS)] = N_("Read-only file system"), -# if EROFS > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EROFS -# endif -#endif -#ifdef EMLINK -/* -TRANS The link count of a single file would become too large. -TRANS @code{rename} can cause this error if the file being renamed already has -TRANS as many links as it can take (@pxref{Renaming Files}). */ - [ERR_REMAP (EMLINK)] = N_("Too many links"), -# if EMLINK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EMLINK -# endif -#endif -#ifdef EPIPE -/* -TRANS There is no process reading from the other end of a pipe. -TRANS Every library function that returns this error code also generates a -TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled -TRANS or blocked. Thus, your program will never actually see @code{EPIPE} -TRANS unless it has handled or blocked @code{SIGPIPE}. */ - [ERR_REMAP (EPIPE)] = N_("Broken pipe"), -# if EPIPE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPIPE -# endif -#endif -#ifdef EDOM -/* -TRANS Used by mathematical functions when an argument value does -TRANS not fall into the domain over which the function is defined. */ - [ERR_REMAP (EDOM)] = N_("Numerical argument out of domain"), -# if EDOM > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EDOM -# endif -#endif -#ifdef ERANGE -/* -TRANS Used by mathematical functions when the result value is -TRANS not representable because of overflow or underflow. */ - [ERR_REMAP (ERANGE)] = N_("Numerical result out of range"), -# if ERANGE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ERANGE -# endif -#endif -#ifdef EAGAIN -/* -TRANS The call might work if you try again -TRANS later. The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN}; -TRANS they are always the same in @theglibc{}. -TRANS -TRANS This error can happen in a few different situations: -TRANS -TRANS @itemize @bullet -TRANS @item -TRANS An operation that would block was attempted on an object that has -TRANS non-blocking mode selected. Trying the same operation again will block -TRANS until some external condition makes it possible to read, write, or -TRANS connect (whatever the operation). You can use @code{select} to find out -TRANS when the operation will be possible; @pxref{Waiting for I/O}. -TRANS -TRANS @strong{Portability Note:} In many older Unix systems, this condition -TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code -TRANS different from @code{EAGAIN}. To make your program portable, you should -TRANS check for both codes and treat them the same. -TRANS -TRANS @item -TRANS A temporary resource shortage made an operation impossible. @code{fork} -TRANS can return this error. It indicates that the shortage is expected to -TRANS pass, so your program can try the call again later and it may succeed. -TRANS It is probably a good idea to delay for a few seconds before trying it -TRANS again, to allow time for other processes to release scarce resources. -TRANS Such shortages are usually fairly serious and affect the whole system, -TRANS so usually an interactive program should report the error to the user -TRANS and return to its command loop. -TRANS @end itemize */ - [ERR_REMAP (EAGAIN)] = N_("Resource temporarily unavailable"), -# if EAGAIN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EAGAIN -# endif -#endif -#if defined (EWOULDBLOCK) && EWOULDBLOCK != EAGAIN -/* -TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above). -TRANS The values are always the same, on every operating system. -TRANS -TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a -TRANS separate error code. */ - [ERR_REMAP (EWOULDBLOCK)] = N_("Operation would block"), -# if EWOULDBLOCK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EWOULDBLOCK -# endif -#endif -#ifdef EINPROGRESS -/* -TRANS An operation that cannot complete immediately was initiated on an object -TRANS that has non-blocking mode selected. Some functions that must always -TRANS block (such as @code{connect}; @pxref{Connecting}) never return -TRANS @code{EAGAIN}. Instead, they return @code{EINPROGRESS} to indicate that -TRANS the operation has begun and will take some time. Attempts to manipulate -TRANS the object before the call completes return @code{EALREADY}. You can -TRANS use the @code{select} function to find out when the pending operation -TRANS has completed; @pxref{Waiting for I/O}. */ - [ERR_REMAP (EINPROGRESS)] = N_("Operation now in progress"), -# if EINPROGRESS > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EINPROGRESS -# endif -#endif -#ifdef EALREADY -/* -TRANS An operation is already in progress on an object that has non-blocking -TRANS mode selected. */ - [ERR_REMAP (EALREADY)] = N_("Operation already in progress"), -# if EALREADY > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EALREADY -# endif -#endif -#ifdef ENOTSOCK -/* -TRANS A file that isn't a socket was specified when a socket is required. */ - [ERR_REMAP (ENOTSOCK)] = N_("Socket operation on non-socket"), -# if ENOTSOCK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTSOCK -# endif -#endif -#ifdef EMSGSIZE -/* -TRANS The size of a message sent on a socket was larger than the supported -TRANS maximum size. */ - [ERR_REMAP (EMSGSIZE)] = N_("Message too long"), -# if EMSGSIZE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EMSGSIZE -# endif -#endif -#ifdef EPROTOTYPE -/* -TRANS The socket type does not support the requested communications protocol. */ - [ERR_REMAP (EPROTOTYPE)] = N_("Protocol wrong type for socket"), -# if EPROTOTYPE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPROTOTYPE -# endif -#endif -#ifdef ENOPROTOOPT -/* -TRANS You specified a socket option that doesn't make sense for the -TRANS particular protocol being used by the socket. @xref{Socket Options}. */ - [ERR_REMAP (ENOPROTOOPT)] = N_("Protocol not available"), -# if ENOPROTOOPT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOPROTOOPT -# endif -#endif -#ifdef EPROTONOSUPPORT -/* -TRANS The socket domain does not support the requested communications protocol -TRANS (perhaps because the requested protocol is completely invalid). -TRANS @xref{Creating a Socket}. */ - [ERR_REMAP (EPROTONOSUPPORT)] = N_("Protocol not supported"), -# if EPROTONOSUPPORT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPROTONOSUPPORT -# endif -#endif -#ifdef ESOCKTNOSUPPORT -/* -TRANS The socket type is not supported. */ - [ERR_REMAP (ESOCKTNOSUPPORT)] = N_("Socket type not supported"), -# if ESOCKTNOSUPPORT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ESOCKTNOSUPPORT -# endif -#endif -#ifdef EOPNOTSUPP -/* -TRANS The operation you requested is not supported. Some socket functions -TRANS don't make sense for all types of sockets, and others may not be -TRANS implemented for all communications protocols. On @gnuhurdsystems{}, this -TRANS error can happen for many calls when the object does not support the -TRANS particular operation; it is a generic indication that the server knows -TRANS nothing to do for that call. */ - [ERR_REMAP (EOPNOTSUPP)] = N_("Operation not supported"), -# if EOPNOTSUPP > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EOPNOTSUPP -# endif -#endif -#ifdef EPFNOSUPPORT -/* -TRANS The socket communications protocol family you requested is not supported. */ - [ERR_REMAP (EPFNOSUPPORT)] = N_("Protocol family not supported"), -# if EPFNOSUPPORT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPFNOSUPPORT -# endif -#endif -#ifdef EAFNOSUPPORT -/* -TRANS The address family specified for a socket is not supported; it is -TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}. */ - [ERR_REMAP (EAFNOSUPPORT)] = N_("Address family not supported by protocol"), -# if EAFNOSUPPORT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EAFNOSUPPORT -# endif -#endif -#ifdef EADDRINUSE -/* -TRANS The requested socket address is already in use. @xref{Socket Addresses}. */ - [ERR_REMAP (EADDRINUSE)] = N_("Address already in use"), -# if EADDRINUSE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EADDRINUSE -# endif -#endif -#ifdef EADDRNOTAVAIL -/* -TRANS The requested socket address is not available; for example, you tried -TRANS to give a socket a name that doesn't match the local host name. -TRANS @xref{Socket Addresses}. */ - [ERR_REMAP (EADDRNOTAVAIL)] = N_("Cannot assign requested address"), -# if EADDRNOTAVAIL > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EADDRNOTAVAIL -# endif -#endif -#ifdef ENETDOWN -/* -TRANS A socket operation failed because the network was down. */ - [ERR_REMAP (ENETDOWN)] = N_("Network is down"), -# if ENETDOWN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENETDOWN -# endif -#endif -#ifdef ENETUNREACH -/* -TRANS A socket operation failed because the subnet containing the remote host -TRANS was unreachable. */ - [ERR_REMAP (ENETUNREACH)] = N_("Network is unreachable"), -# if ENETUNREACH > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENETUNREACH -# endif -#endif -#ifdef ENETRESET -/* -TRANS A network connection was reset because the remote host crashed. */ - [ERR_REMAP (ENETRESET)] = N_("Network dropped connection on reset"), -# if ENETRESET > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENETRESET -# endif -#endif -#ifdef ECONNABORTED -/* -TRANS A network connection was aborted locally. */ - [ERR_REMAP (ECONNABORTED)] = N_("Software caused connection abort"), -# if ECONNABORTED > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ECONNABORTED -# endif -#endif -#ifdef ECONNRESET -/* -TRANS A network connection was closed for reasons outside the control of the -TRANS local host, such as by the remote machine rebooting or an unrecoverable -TRANS protocol violation. */ - [ERR_REMAP (ECONNRESET)] = N_("Connection reset by peer"), -# if ECONNRESET > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ECONNRESET -# endif -#endif -#ifdef ENOBUFS -/* -TRANS The kernel's buffers for I/O operations are all in use. In GNU, this -TRANS error is always synonymous with @code{ENOMEM}; you may get one or the -TRANS other from network operations. */ - [ERR_REMAP (ENOBUFS)] = N_("No buffer space available"), -# if ENOBUFS > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOBUFS -# endif -#endif -#ifdef EISCONN -/* -TRANS You tried to connect a socket that is already connected. -TRANS @xref{Connecting}. */ - [ERR_REMAP (EISCONN)] = N_("Transport endpoint is already connected"), -# if EISCONN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EISCONN -# endif -#endif -#ifdef ENOTCONN -/* -TRANS The socket is not connected to anything. You get this error when you -TRANS try to transmit data over a socket, without first specifying a -TRANS destination for the data. For a connectionless socket (for datagram -TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. */ - [ERR_REMAP (ENOTCONN)] = N_("Transport endpoint is not connected"), -# if ENOTCONN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTCONN -# endif -#endif -#ifdef EDESTADDRREQ -/* -TRANS No default destination address was set for the socket. You get this -TRANS error when you try to transmit data over a connectionless socket, -TRANS without first specifying a destination for the data with @code{connect}. */ - [ERR_REMAP (EDESTADDRREQ)] = N_("Destination address required"), -# if EDESTADDRREQ > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EDESTADDRREQ -# endif -#endif -#ifdef ESHUTDOWN -/* -TRANS The socket has already been shut down. */ - [ERR_REMAP (ESHUTDOWN)] = N_("Cannot send after transport endpoint shutdown"), -# if ESHUTDOWN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ESHUTDOWN -# endif -#endif -#ifdef ETOOMANYREFS -/* */ - [ERR_REMAP (ETOOMANYREFS)] = N_("Too many references: cannot splice"), -# if ETOOMANYREFS > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ETOOMANYREFS -# endif -#endif -#ifdef ETIMEDOUT -/* -TRANS A socket operation with a specified timeout received no response during -TRANS the timeout period. */ - [ERR_REMAP (ETIMEDOUT)] = N_("Connection timed out"), -# if ETIMEDOUT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ETIMEDOUT -# endif -#endif -#ifdef ECONNREFUSED -/* -TRANS A remote host refused to allow the network connection (typically because -TRANS it is not running the requested service). */ - [ERR_REMAP (ECONNREFUSED)] = N_("Connection refused"), -# if ECONNREFUSED > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ECONNREFUSED -# endif -#endif -#ifdef ELOOP -/* -TRANS Too many levels of symbolic links were encountered in looking up a file name. -TRANS This often indicates a cycle of symbolic links. */ - [ERR_REMAP (ELOOP)] = N_("Too many levels of symbolic links"), -# if ELOOP > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ELOOP -# endif -#endif -#ifdef ENAMETOOLONG -/* -TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for -TRANS Files}) or host name too long (in @code{gethostname} or -TRANS @code{sethostname}; @pxref{Host Identification}). */ - [ERR_REMAP (ENAMETOOLONG)] = N_("File name too long"), -# if ENAMETOOLONG > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENAMETOOLONG -# endif -#endif -#ifdef EHOSTDOWN -/* -TRANS The remote host for a requested network connection is down. */ - [ERR_REMAP (EHOSTDOWN)] = N_("Host is down"), -# if EHOSTDOWN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EHOSTDOWN -# endif -#endif -#ifdef EHOSTUNREACH -/* -TRANS The remote host for a requested network connection is not reachable. */ - [ERR_REMAP (EHOSTUNREACH)] = N_("No route to host"), -# if EHOSTUNREACH > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EHOSTUNREACH -# endif -#endif -#ifdef ENOTEMPTY -/* -TRANS Directory not empty, where an empty directory was expected. Typically, -TRANS this error occurs when you are trying to delete a directory. */ - [ERR_REMAP (ENOTEMPTY)] = N_("Directory not empty"), -# if ENOTEMPTY > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTEMPTY -# endif -#endif -#ifdef EPROCLIM -/* -TRANS This means that the per-user limit on new process would be exceeded by -TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on -TRANS the @code{RLIMIT_NPROC} limit. */ - [ERR_REMAP (EPROCLIM)] = N_("Too many processes"), -# if EPROCLIM > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPROCLIM -# endif -#endif -#ifdef EUSERS -/* -TRANS The file quota system is confused because there are too many users. -TRANS @c This can probably happen in a GNU system when using NFS. */ - [ERR_REMAP (EUSERS)] = N_("Too many users"), -# if EUSERS > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EUSERS -# endif -#endif -#ifdef EDQUOT -/* -TRANS The user's disk quota was exceeded. */ - [ERR_REMAP (EDQUOT)] = N_("Disk quota exceeded"), -# if EDQUOT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EDQUOT -# endif -#endif -#ifdef ESTALE -/* -TRANS This indicates an internal confusion in the -TRANS file system which is due to file system rearrangements on the server host -TRANS for NFS file systems or corruption in other file systems. -TRANS Repairing this condition usually requires unmounting, possibly repairing -TRANS and remounting the file system. */ - [ERR_REMAP (ESTALE)] = N_("Stale file handle"), -# if ESTALE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ESTALE -# endif -#endif -#ifdef EREMOTE -/* -TRANS An attempt was made to NFS-mount a remote file system with a file name that -TRANS already specifies an NFS-mounted file. -TRANS (This is an error on some operating systems, but we expect it to work -TRANS properly on @gnuhurdsystems{}, making this error code impossible.) */ - [ERR_REMAP (EREMOTE)] = N_("Object is remote"), -# if EREMOTE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EREMOTE -# endif -#endif -#ifdef EBADRPC -/* */ - [ERR_REMAP (EBADRPC)] = N_("RPC struct is bad"), -# if EBADRPC > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBADRPC -# endif -#endif -#ifdef ERPCMISMATCH -/* */ - [ERR_REMAP (ERPCMISMATCH)] = N_("RPC version wrong"), -# if ERPCMISMATCH > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ERPCMISMATCH -# endif -#endif -#ifdef EPROGUNAVAIL -/* */ - [ERR_REMAP (EPROGUNAVAIL)] = N_("RPC program not available"), -# if EPROGUNAVAIL > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPROGUNAVAIL -# endif -#endif -#ifdef EPROGMISMATCH -/* */ - [ERR_REMAP (EPROGMISMATCH)] = N_("RPC program version wrong"), -# if EPROGMISMATCH > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPROGMISMATCH -# endif -#endif -#ifdef EPROCUNAVAIL -/* */ - [ERR_REMAP (EPROCUNAVAIL)] = N_("RPC bad procedure for program"), -# if EPROCUNAVAIL > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPROCUNAVAIL -# endif -#endif -#ifdef ENOLCK -/* -TRANS This is used by the file locking facilities; see -TRANS @ref{File Locks}. This error is never generated by @gnuhurdsystems{}, but -TRANS it can result from an operation to an NFS server running another -TRANS operating system. */ - [ERR_REMAP (ENOLCK)] = N_("No locks available"), -# if ENOLCK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOLCK -# endif -#endif -#ifdef EFTYPE -/* -TRANS The file was the wrong type for the -TRANS operation, or a data file had the wrong format. -TRANS -TRANS On some systems @code{chmod} returns this error if you try to set the -TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. */ - [ERR_REMAP (EFTYPE)] = N_("Inappropriate file type or format"), -# if EFTYPE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EFTYPE -# endif -#endif -#ifdef EAUTH -/* */ - [ERR_REMAP (EAUTH)] = N_("Authentication error"), -# if EAUTH > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EAUTH -# endif -#endif -#ifdef ENEEDAUTH -/* */ - [ERR_REMAP (ENEEDAUTH)] = N_("Need authenticator"), -# if ENEEDAUTH > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENEEDAUTH -# endif -#endif -#ifdef ENOSYS -/* -TRANS This indicates that the function called is -TRANS not implemented at all, either in the C library itself or in the -TRANS operating system. When you get this error, you can be sure that this -TRANS particular function will always fail with @code{ENOSYS} unless you -TRANS install a new version of the C library or the operating system. */ - [ERR_REMAP (ENOSYS)] = N_("Function not implemented"), -# if ENOSYS > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOSYS -# endif -#endif -#if defined (ENOTSUP) && ENOTSUP != EOPNOTSUPP -/* -TRANS A function returns this error when certain parameter -TRANS values are valid, but the functionality they request is not available. -TRANS This can mean that the function does not implement a particular command -TRANS or option value or flag bit at all. For functions that operate on some -TRANS object given in a parameter, such as a file descriptor or a port, it -TRANS might instead mean that only @emph{that specific object} (file -TRANS descriptor, port, etc.) is unable to support the other parameters given; -TRANS different file descriptors might support different ranges of parameter -TRANS values. -TRANS -TRANS If the entire function is not available at all in the implementation, -TRANS it returns @code{ENOSYS} instead. */ - [ERR_REMAP (ENOTSUP)] = N_("Not supported"), -# if ENOTSUP > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTSUP -# endif -#endif -#ifdef EILSEQ -/* -TRANS While decoding a multibyte character the function came along an invalid -TRANS or an incomplete sequence of bytes or the given wide character is invalid. */ - [ERR_REMAP (EILSEQ)] = N_("Invalid or incomplete multibyte or wide character"), -# if EILSEQ > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EILSEQ -# endif -#endif -#ifdef EBACKGROUND -/* -TRANS On @gnuhurdsystems{}, servers supporting the @code{term} protocol return -TRANS this error for certain operations when the caller is not in the -TRANS foreground process group of the terminal. Users do not usually see this -TRANS error because functions such as @code{read} and @code{write} translate -TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control}, -TRANS for information on process groups and these signals. */ - [ERR_REMAP (EBACKGROUND)] = N_("Inappropriate operation for background process"), -# if EBACKGROUND > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBACKGROUND -# endif -#endif -#ifdef EDIED -/* -TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is -TRANS translated by a program and the translator program dies while starting -TRANS up, before it has connected to the file. */ - [ERR_REMAP (EDIED)] = N_("Translator died"), -# if EDIED > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EDIED -# endif -#endif -#ifdef ED -/* -TRANS The experienced user will know what is wrong. -TRANS @c This error code is a joke. Its perror text is part of the joke. -TRANS @c Don't change it. */ - [ERR_REMAP (ED)] = N_("?"), -# if ED > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ED -# endif -#endif -#ifdef EGREGIOUS -/* -TRANS You did @strong{what}? */ - [ERR_REMAP (EGREGIOUS)] = N_("You really blew it this time"), -# if EGREGIOUS > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EGREGIOUS -# endif -#endif -#ifdef EIEIO -/* -TRANS Go home and have a glass of warm, dairy-fresh milk. -TRANS @c Okay. Since you are dying to know, I'll tell you. -TRANS @c This is a joke, obviously. There is a children's song which begins, -TRANS @c "Old McDonald had a farm, e-i-e-i-o." Every time I see the (real) -TRANS @c errno macro EIO, I think about that song. Probably most of my -TRANS @c compatriots who program on Unix do, too. One of them must have stayed -TRANS @c up a little too late one night and decided to add it to Hurd or Glibc. -TRANS @c Whoever did it should be castigated, but it made me laugh. -TRANS @c --jtobey@channel1.com -TRANS @c -TRANS @c "bought the farm" means "died". -jtobey -TRANS @c -TRANS @c Translators, please do not translate this litteraly, translate it into -TRANS @c an idiomatic funny way of saying that the computer died. */ - [ERR_REMAP (EIEIO)] = N_("Computer bought the farm"), -# if EIEIO > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EIEIO -# endif -#endif -#ifdef EGRATUITOUS -/* -TRANS This error code has no purpose. */ - [ERR_REMAP (EGRATUITOUS)] = N_("Gratuitous error"), -# if EGRATUITOUS > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EGRATUITOUS -# endif -#endif -#ifdef EBADMSG -/* */ - [ERR_REMAP (EBADMSG)] = N_("Bad message"), -# if EBADMSG > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBADMSG -# endif -#endif -#ifdef EIDRM -/* */ - [ERR_REMAP (EIDRM)] = N_("Identifier removed"), -# if EIDRM > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EIDRM -# endif -#endif -#ifdef EMULTIHOP -/* */ - [ERR_REMAP (EMULTIHOP)] = N_("Multihop attempted"), -# if EMULTIHOP > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EMULTIHOP -# endif -#endif -#ifdef ENODATA -/* */ - [ERR_REMAP (ENODATA)] = N_("No data available"), -# if ENODATA > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENODATA -# endif -#endif -#ifdef ENOLINK -/* */ - [ERR_REMAP (ENOLINK)] = N_("Link has been severed"), -# if ENOLINK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOLINK -# endif -#endif -#ifdef ENOMSG -/* */ - [ERR_REMAP (ENOMSG)] = N_("No message of desired type"), -# if ENOMSG > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOMSG -# endif -#endif -#ifdef ENOSR -/* */ - [ERR_REMAP (ENOSR)] = N_("Out of streams resources"), -# if ENOSR > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOSR -# endif -#endif -#ifdef ENOSTR -/* */ - [ERR_REMAP (ENOSTR)] = N_("Device not a stream"), -# if ENOSTR > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOSTR -# endif -#endif -#ifdef EOVERFLOW -/* */ - [ERR_REMAP (EOVERFLOW)] = N_("Value too large for defined data type"), -# if EOVERFLOW > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EOVERFLOW -# endif -#endif -#ifdef EPROTO -/* */ - [ERR_REMAP (EPROTO)] = N_("Protocol error"), -# if EPROTO > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPROTO -# endif -#endif -#ifdef ETIME -/* */ - [ERR_REMAP (ETIME)] = N_("Timer expired"), -# if ETIME > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ETIME -# endif -#endif -#ifdef ECANCELED -/* -TRANS An asynchronous operation was canceled before it -TRANS completed. @xref{Asynchronous I/O}. When you call @code{aio_cancel}, -TRANS the normal result is for the operations affected to complete with this -TRANS error; @pxref{Cancel AIO Operations}. */ - [ERR_REMAP (ECANCELED)] = N_("Operation canceled"), -# if ECANCELED > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ECANCELED -# endif -#endif -#ifdef EOWNERDEAD -/* */ - [ERR_REMAP (EOWNERDEAD)] = N_("Owner died"), -# if EOWNERDEAD > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EOWNERDEAD -# endif -#endif -#ifdef ENOTRECOVERABLE -/* */ - [ERR_REMAP (ENOTRECOVERABLE)] = N_("State not recoverable"), -# if ENOTRECOVERABLE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTRECOVERABLE -# endif -#endif -#ifdef ERESTART -/* */ - [ERR_REMAP (ERESTART)] = N_("Interrupted system call should be restarted"), -# if ERESTART > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ERESTART -# endif -#endif -#ifdef ECHRNG -/* */ - [ERR_REMAP (ECHRNG)] = N_("Channel number out of range"), -# if ECHRNG > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ECHRNG -# endif -#endif -#ifdef EL2NSYNC -/* */ - [ERR_REMAP (EL2NSYNC)] = N_("Level 2 not synchronized"), -# if EL2NSYNC > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EL2NSYNC -# endif -#endif -#ifdef EL3HLT -/* */ - [ERR_REMAP (EL3HLT)] = N_("Level 3 halted"), -# if EL3HLT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EL3HLT -# endif -#endif -#ifdef EL3RST -/* */ - [ERR_REMAP (EL3RST)] = N_("Level 3 reset"), -# if EL3RST > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EL3RST -# endif -#endif -#ifdef ELNRNG -/* */ - [ERR_REMAP (ELNRNG)] = N_("Link number out of range"), -# if ELNRNG > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ELNRNG -# endif -#endif -#ifdef EUNATCH -/* */ - [ERR_REMAP (EUNATCH)] = N_("Protocol driver not attached"), -# if EUNATCH > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EUNATCH -# endif -#endif -#ifdef ENOCSI -/* */ - [ERR_REMAP (ENOCSI)] = N_("No CSI structure available"), -# if ENOCSI > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOCSI -# endif -#endif -#ifdef EL2HLT -/* */ - [ERR_REMAP (EL2HLT)] = N_("Level 2 halted"), -# if EL2HLT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EL2HLT -# endif -#endif -#ifdef EBADE -/* */ - [ERR_REMAP (EBADE)] = N_("Invalid exchange"), -# if EBADE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBADE -# endif -#endif -#ifdef EBADR -/* */ - [ERR_REMAP (EBADR)] = N_("Invalid request descriptor"), -# if EBADR > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBADR -# endif -#endif -#ifdef EXFULL -/* */ - [ERR_REMAP (EXFULL)] = N_("Exchange full"), -# if EXFULL > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EXFULL -# endif -#endif -#ifdef ENOANO -/* */ - [ERR_REMAP (ENOANO)] = N_("No anode"), -# if ENOANO > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOANO -# endif -#endif -#ifdef EBADRQC -/* */ - [ERR_REMAP (EBADRQC)] = N_("Invalid request code"), -# if EBADRQC > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBADRQC -# endif -#endif -#ifdef EBADSLT -/* */ - [ERR_REMAP (EBADSLT)] = N_("Invalid slot"), -# if EBADSLT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBADSLT -# endif -#endif -#if defined (EDEADLOCK) && EDEADLOCK != EDEADLK -/* */ - [ERR_REMAP (EDEADLOCK)] = N_("File locking deadlock error"), -# if EDEADLOCK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EDEADLOCK -# endif -#endif -#ifdef EBFONT -/* */ - [ERR_REMAP (EBFONT)] = N_("Bad font file format"), -# if EBFONT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBFONT -# endif -#endif -#ifdef ENONET -/* */ - [ERR_REMAP (ENONET)] = N_("Machine is not on the network"), -# if ENONET > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENONET -# endif -#endif -#ifdef ENOPKG -/* */ - [ERR_REMAP (ENOPKG)] = N_("Package not installed"), -# if ENOPKG > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOPKG -# endif -#endif -#ifdef EADV -/* */ - [ERR_REMAP (EADV)] = N_("Advertise error"), -# if EADV > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EADV -# endif -#endif -#ifdef ESRMNT -/* */ - [ERR_REMAP (ESRMNT)] = N_("Srmount error"), -# if ESRMNT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ESRMNT -# endif -#endif -#ifdef ECOMM -/* */ - [ERR_REMAP (ECOMM)] = N_("Communication error on send"), -# if ECOMM > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ECOMM -# endif -#endif -#ifdef EDOTDOT -/* */ - [ERR_REMAP (EDOTDOT)] = N_("RFS specific error"), -# if EDOTDOT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EDOTDOT -# endif -#endif -#ifdef ENOTUNIQ -/* */ - [ERR_REMAP (ENOTUNIQ)] = N_("Name not unique on network"), -# if ENOTUNIQ > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTUNIQ -# endif -#endif -#ifdef EBADFD -/* */ - [ERR_REMAP (EBADFD)] = N_("File descriptor in bad state"), -# if EBADFD > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBADFD -# endif -#endif -#ifdef EREMCHG -/* */ - [ERR_REMAP (EREMCHG)] = N_("Remote address changed"), -# if EREMCHG > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EREMCHG -# endif -#endif -#ifdef ELIBACC -/* */ - [ERR_REMAP (ELIBACC)] = N_("Can not access a needed shared library"), -# if ELIBACC > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ELIBACC -# endif -#endif -#ifdef ELIBBAD -/* */ - [ERR_REMAP (ELIBBAD)] = N_("Accessing a corrupted shared library"), -# if ELIBBAD > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ELIBBAD -# endif -#endif -#ifdef ELIBSCN -/* */ - [ERR_REMAP (ELIBSCN)] = N_(".lib section in a.out corrupted"), -# if ELIBSCN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ELIBSCN -# endif -#endif -#ifdef ELIBMAX -/* */ - [ERR_REMAP (ELIBMAX)] = N_("Attempting to link in too many shared libraries"), -# if ELIBMAX > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ELIBMAX -# endif -#endif -#ifdef ELIBEXEC -/* */ - [ERR_REMAP (ELIBEXEC)] = N_("Cannot exec a shared library directly"), -# if ELIBEXEC > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ELIBEXEC -# endif -#endif -#ifdef ESTRPIPE -/* */ - [ERR_REMAP (ESTRPIPE)] = N_("Streams pipe error"), -# if ESTRPIPE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ESTRPIPE -# endif -#endif -#ifdef EUCLEAN -/* */ - [ERR_REMAP (EUCLEAN)] = N_("Structure needs cleaning"), -# if EUCLEAN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EUCLEAN -# endif -#endif -#ifdef ENOTNAM -/* */ - [ERR_REMAP (ENOTNAM)] = N_("Not a XENIX named type file"), -# if ENOTNAM > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTNAM -# endif -#endif -#ifdef ENAVAIL -/* */ - [ERR_REMAP (ENAVAIL)] = N_("No XENIX semaphores available"), -# if ENAVAIL > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENAVAIL -# endif -#endif -#ifdef EISNAM -/* */ - [ERR_REMAP (EISNAM)] = N_("Is a named type file"), -# if EISNAM > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EISNAM -# endif -#endif -#ifdef EREMOTEIO -/* */ - [ERR_REMAP (EREMOTEIO)] = N_("Remote I/O error"), -# if EREMOTEIO > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EREMOTEIO -# endif -#endif -#ifdef ENOMEDIUM -/* */ - [ERR_REMAP (ENOMEDIUM)] = N_("No medium found"), -# if ENOMEDIUM > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOMEDIUM -# endif -#endif -#ifdef EMEDIUMTYPE -/* */ - [ERR_REMAP (EMEDIUMTYPE)] = N_("Wrong medium type"), -# if EMEDIUMTYPE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EMEDIUMTYPE -# endif -#endif -#ifdef ENOKEY -/* */ - [ERR_REMAP (ENOKEY)] = N_("Required key not available"), -# if ENOKEY > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOKEY -# endif -#endif -#ifdef EKEYEXPIRED -/* */ - [ERR_REMAP (EKEYEXPIRED)] = N_("Key has expired"), -# if EKEYEXPIRED > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EKEYEXPIRED -# endif -#endif -#ifdef EKEYREVOKED -/* */ - [ERR_REMAP (EKEYREVOKED)] = N_("Key has been revoked"), -# if EKEYREVOKED > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EKEYREVOKED -# endif -#endif -#ifdef EKEYREJECTED -/* */ - [ERR_REMAP (EKEYREJECTED)] = N_("Key was rejected by service"), -# if EKEYREJECTED > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EKEYREJECTED -# endif -#endif -#ifdef ERFKILL -/* */ - [ERR_REMAP (ERFKILL)] = N_("Operation not possible due to RF-kill"), -# if ERFKILL > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ERFKILL -# endif -#endif -#ifdef EHWPOISON -/* */ - [ERR_REMAP (EHWPOISON)] = N_("Memory page has hardware error"), -# if EHWPOISON > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EHWPOISON -# endif -#endif - }; - -#define NERR \ - (sizeof _sys_errlist_internal / sizeof _sys_errlist_internal [0]) -const int _sys_nerr_internal = NERR; - -#if IS_IN (libc) && !defined ERRLIST_NO_COMPAT -# include <errlist-compat.c> -#endif - -#ifdef EMIT_ERR_MAX -void dummy (void) -{ asm volatile (" @@@ %0 @@@ " : : "i" (ERR_REMAP (ERR_MAX))); } -#endif |