diff options
Diffstat (limited to 'posix/regex.h')
| -rw-r--r-- | posix/regex.h | 335 |
1 files changed, 206 insertions, 129 deletions
diff --git a/posix/regex.h b/posix/regex.h index e0b89158a8..32933bc6d5 100644 --- a/posix/regex.h +++ b/posix/regex.h @@ -15,7 +15,7 @@ You should have received a copy of the GNU Lesser General Public License along with the GNU C Library; if not, see - <http://www.gnu.org/licenses/>. */ + <https://www.gnu.org/licenses/>. */ #ifndef _REGEX_H #define _REGEX_H 1 @@ -27,6 +27,36 @@ extern "C" { #endif +/* Define __USE_GNU to declare GNU extensions that violate the + POSIX name space rules. */ +#ifdef _GNU_SOURCE +# define __USE_GNU 1 +#endif + +#ifdef _REGEX_LARGE_OFFSETS + +/* Use types and values that are wide enough to represent signed and + unsigned byte offsets in memory. This currently works only when + the regex code is used outside of the GNU C library; it is not yet + supported within glibc itself, and glibc users should not define + _REGEX_LARGE_OFFSETS. */ + +/* The type of object sizes. */ +typedef size_t __re_size_t; + +/* The type of object sizes, in places where the traditional code + uses unsigned long int. */ +typedef size_t __re_long_size_t; + +#else + +/* The traditional GNU regex implementation mishandles strings longer + than INT_MAX. */ +typedef unsigned int __re_size_t; +typedef unsigned long int __re_long_size_t; + +#endif + /* The following two types have to be signed and unsigned integer type wide enough to hold a value of a pointer. For most ANSI compilers ptrdiff_t and size_t should be likely OK. Still size of these two @@ -108,9 +138,9 @@ typedef unsigned long int reg_syntax_t; If not set, newline is literal. */ # define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1) -/* If this bit is set, then `{...}' defines an interval, and \{ and \} +/* If this bit is set, then '{...}' defines an interval, and \{ and \} are literals. - If not set, then `\{...\}' defines an interval. */ + If not set, then '\{...\}' defines an interval. */ # define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1) /* If this bit is set, (...) defines a group, and \( and \) are literals. @@ -165,8 +195,8 @@ typedef unsigned long int reg_syntax_t; whether ^ should be special. */ # define RE_CARET_ANCHORS_HERE (RE_ICASE << 1) -/* If this bit is set, then \{ cannot be first in an bre or - immediately after an alternation or begin-group operator. */ +/* If this bit is set, then \{ cannot be first in a regex or + immediately after an alternation, open-group or \} operator. */ # define RE_CONTEXT_INVALID_DUP (RE_CARET_ANCHORS_HERE << 1) /* If this bit is set, then no_sub will be set to 1 during @@ -185,9 +215,9 @@ extern reg_syntax_t re_syntax_options; (The [[[ comments delimit what gets put into the Texinfo file, so don't delete them!) */ /* [[[begin syntaxes]]] */ -#define RE_SYNTAX_EMACS 0 +# define RE_SYNTAX_EMACS 0 -#define RE_SYNTAX_AWK \ +# define RE_SYNTAX_AWK \ (RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DOT_NOT_NULL \ | RE_NO_BK_PARENS | RE_NO_BK_REFS \ | RE_NO_BK_VBAR | RE_NO_EMPTY_RANGES \ @@ -195,52 +225,49 @@ extern reg_syntax_t re_syntax_options; | RE_CHAR_CLASSES \ | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS) -#define RE_SYNTAX_GNU_AWK \ +# define RE_SYNTAX_GNU_AWK \ ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \ | RE_INVALID_INTERVAL_ORD) \ & ~(RE_DOT_NOT_NULL | RE_CONTEXT_INDEP_OPS \ | RE_CONTEXT_INVALID_OPS )) -#define RE_SYNTAX_POSIX_AWK \ +# define RE_SYNTAX_POSIX_AWK \ (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \ | RE_INTERVALS | RE_NO_GNU_OPS \ | RE_INVALID_INTERVAL_ORD) -#define RE_SYNTAX_GREP \ - (RE_BK_PLUS_QM | RE_CHAR_CLASSES \ - | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS \ - | RE_NEWLINE_ALT) +# define RE_SYNTAX_GREP \ + ((RE_SYNTAX_POSIX_BASIC | RE_NEWLINE_ALT) \ + & ~(RE_CONTEXT_INVALID_DUP | RE_DOT_NOT_NULL)) -#define RE_SYNTAX_EGREP \ - (RE_CHAR_CLASSES | RE_CONTEXT_INDEP_ANCHORS \ - | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE \ - | RE_NEWLINE_ALT | RE_NO_BK_PARENS \ - | RE_NO_BK_VBAR) +# define RE_SYNTAX_EGREP \ + ((RE_SYNTAX_POSIX_EXTENDED | RE_INVALID_INTERVAL_ORD | RE_NEWLINE_ALT) \ + & ~(RE_CONTEXT_INVALID_OPS | RE_DOT_NOT_NULL)) -#define RE_SYNTAX_POSIX_EGREP \ - (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES \ - | RE_INVALID_INTERVAL_ORD) +/* POSIX grep -E behavior is no longer incompatible with GNU. */ +# define RE_SYNTAX_POSIX_EGREP \ + RE_SYNTAX_EGREP /* P1003.2/D11.2, section 4.20.7.1, lines 5078ff. */ -#define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC +# define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC -#define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC +# define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC /* Syntax bits common to both basic and extended POSIX regex syntax. */ -#define _RE_SYNTAX_POSIX_COMMON \ +# define _RE_SYNTAX_POSIX_COMMON \ (RE_CHAR_CLASSES | RE_DOT_NEWLINE | RE_DOT_NOT_NULL \ | RE_INTERVALS | RE_NO_EMPTY_RANGES) -#define RE_SYNTAX_POSIX_BASIC \ +# define RE_SYNTAX_POSIX_BASIC \ (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM | RE_CONTEXT_INVALID_DUP) /* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes RE_LIMITED_OPS, i.e., \? \+ \| are not recognized. Actually, this isn't minimal, since other operators, such as \`, aren't disabled. */ -#define RE_SYNTAX_POSIX_MINIMAL_BASIC \ +# define RE_SYNTAX_POSIX_MINIMAL_BASIC \ (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS) -#define RE_SYNTAX_POSIX_EXTENDED \ +# define RE_SYNTAX_POSIX_EXTENDED \ (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \ | RE_CONTEXT_INDEP_OPS | RE_NO_BK_BRACES \ | RE_NO_BK_PARENS | RE_NO_BK_VBAR \ @@ -248,25 +275,35 @@ extern reg_syntax_t re_syntax_options; /* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is removed and RE_NO_BK_REFS is added. */ -#define RE_SYNTAX_POSIX_MINIMAL_EXTENDED \ +# define RE_SYNTAX_POSIX_MINIMAL_EXTENDED \ (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \ | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES \ | RE_NO_BK_PARENS | RE_NO_BK_REFS \ | RE_NO_BK_VBAR | RE_UNMATCHED_RIGHT_PAREN_ORD) /* [[[end syntaxes]]] */ - -/* Maximum number of duplicates an interval can allow. Some systems - (erroneously) define this in other header files, but we want our + +/* Maximum number of duplicates an interval can allow. POSIX-conforming + systems might define this in <limits.h>, but we want our value, so remove any previous define. */ +# ifdef _REGEX_INCLUDE_LIMITS_H +# include <limits.h> +# endif # ifdef RE_DUP_MAX # undef RE_DUP_MAX # endif -/* If sizeof(int) == 2, then ((1 << 15) - 1) overflows. */ + +/* RE_DUP_MAX is 2**15 - 1 because an earlier implementation stored + the counter as a 2-byte signed integer. This is no longer true, so + RE_DUP_MAX could be increased to (INT_MAX / 10 - 1), or to + ((SIZE_MAX - 9) / 10) if _REGEX_LARGE_OFFSETS is defined. + However, there would be a huge performance problem if someone + actually used a pattern like a\{214748363\}, so RE_DUP_MAX retains + its historical value. */ # define RE_DUP_MAX (0x7fff) #endif -/* POSIX `cflags' bits (i.e., information for `regcomp'). */ +/* POSIX 'cflags' bits (i.e., information for 'regcomp'). */ /* If this bit is set, then use extended regular expression syntax. If not set, then use basic regular expression syntax. */ @@ -274,19 +311,19 @@ extern reg_syntax_t re_syntax_options; /* If this bit is set, then ignore case when matching. If not set, then case is significant. */ -#define REG_ICASE (REG_EXTENDED << 1) +#define REG_ICASE (1 << 1) /* If this bit is set, then anchors do not match at newline characters in the string. If not set, then anchors do match at newlines. */ -#define REG_NEWLINE (REG_ICASE << 1) +#define REG_NEWLINE (1 << 2) /* If this bit is set, then report only success or fail in regexec. If not set, then returns differ between not matching and errors. */ -#define REG_NOSUB (REG_NEWLINE << 1) +#define REG_NOSUB (1 << 3) -/* POSIX `eflags' bits (i.e., information for regexec). */ +/* POSIX 'eflags' bits (i.e., information for regexec). */ /* If this bit is set, then the beginning-of-line operator doesn't match the beginning of the string (presumably because it's not the @@ -304,41 +341,60 @@ extern reg_syntax_t re_syntax_options; /* If any error codes are removed, changed, or added, update the - `re_error_msg' table in regex.c. */ + '__re_error_msgid' table in regcomp.c. */ + typedef enum { -#if defined _XOPEN_SOURCE || defined __USE_XOPEN2K - REG_ENOSYS = -1, /* This will never happen for this implementation. */ -#endif - - REG_NOERROR = 0, /* Success. */ - REG_NOMATCH, /* Didn't find a match (for regexec). */ + _REG_ENOSYS = -1, /* This will never happen for this implementation. */ + _REG_NOERROR = 0, /* Success. */ + _REG_NOMATCH, /* Didn't find a match (for regexec). */ /* POSIX regcomp return error codes. (In the order listed in the standard.) */ - REG_BADPAT, /* Invalid pattern. */ - REG_ECOLLATE, /* Invalid collating element. */ - REG_ECTYPE, /* Invalid character class name. */ - REG_EESCAPE, /* Trailing backslash. */ - REG_ESUBREG, /* Invalid back reference. */ - REG_EBRACK, /* Unmatched left bracket. */ - REG_EPAREN, /* Parenthesis imbalance. */ - REG_EBRACE, /* Unmatched \{. */ - REG_BADBR, /* Invalid contents of \{\}. */ - REG_ERANGE, /* Invalid range end. */ - REG_ESPACE, /* Ran out of memory. */ - REG_BADRPT, /* No preceding re for repetition op. */ + _REG_BADPAT, /* Invalid pattern. */ + _REG_ECOLLATE, /* Invalid collating element. */ + _REG_ECTYPE, /* Invalid character class name. */ + _REG_EESCAPE, /* Trailing backslash. */ + _REG_ESUBREG, /* Invalid back reference. */ + _REG_EBRACK, /* Unmatched left bracket. */ + _REG_EPAREN, /* Parenthesis imbalance. */ + _REG_EBRACE, /* Unmatched \{. */ + _REG_BADBR, /* Invalid contents of \{\}. */ + _REG_ERANGE, /* Invalid range end. */ + _REG_ESPACE, /* Ran out of memory. */ + _REG_BADRPT, /* No preceding re for repetition op. */ /* Error codes we've added. */ - REG_EEND, /* Premature end. */ - REG_ESIZE, /* Compiled pattern bigger than 2^16 bytes. */ - REG_ERPAREN /* Unmatched ) or \); not returned from regcomp. */ + _REG_EEND, /* Premature end. */ + _REG_ESIZE, /* Too large (e.g., repeat count too large). */ + _REG_ERPAREN /* Unmatched ) or \); not returned from regcomp. */ } reg_errcode_t; + +#if defined _XOPEN_SOURCE || defined __USE_XOPEN2K +# define REG_ENOSYS _REG_ENOSYS +#endif +#define REG_NOERROR _REG_NOERROR +#define REG_NOMATCH _REG_NOMATCH +#define REG_BADPAT _REG_BADPAT +#define REG_ECOLLATE _REG_ECOLLATE +#define REG_ECTYPE _REG_ECTYPE +#define REG_EESCAPE _REG_EESCAPE +#define REG_ESUBREG _REG_ESUBREG +#define REG_EBRACK _REG_EBRACK +#define REG_EPAREN _REG_EPAREN +#define REG_EBRACE _REG_EBRACE +#define REG_BADBR _REG_BADBR +#define REG_ERANGE _REG_ERANGE +#define REG_ESPACE _REG_ESPACE +#define REG_BADRPT _REG_BADRPT +#define REG_EEND _REG_EEND +#define REG_ESIZE _REG_ESIZE +#define REG_ERPAREN _REG_ERPAREN /* This data structure represents a compiled pattern. Before calling - the pattern compiler, the fields `buffer', `allocated', `fastmap', - and `translate' can be set. After the pattern has been compiled, - the fields `re_nsub', `not_bol' and `not_eol' are available. All + the pattern compiler, the fields 'buffer', 'allocated', 'fastmap', + and 'translate' can be set. After the pattern has been compiled, + the fields 're_nsub', 'not_bol' and 'not_eol' are available. All other fields are private to the regex routines. */ #ifndef RE_TRANSLATE_TYPE @@ -356,16 +412,15 @@ typedef enum struct re_pattern_buffer { - /* Space that holds the compiled pattern. It is declared as - `unsigned char *' because its elements are sometimes used as - array indexes. */ - unsigned char *__REPB_PREFIX(buffer); + /* Space that holds the compiled pattern. The type + 'struct re_dfa_t' is private and is not declared here. */ + struct re_dfa_t *__REPB_PREFIX(buffer); - /* Number of bytes to which `buffer' points. */ - unsigned long int __REPB_PREFIX(allocated); + /* Number of bytes to which 'buffer' points. */ + __re_long_size_t __REPB_PREFIX(allocated); - /* Number of bytes actually used in `buffer'. */ - unsigned long int __REPB_PREFIX(used); + /* Number of bytes actually used in 'buffer'. */ + __re_long_size_t __REPB_PREFIX(used); /* Syntax setting with which the pattern was compiled. */ reg_syntax_t __REPB_PREFIX(syntax); @@ -385,13 +440,13 @@ struct re_pattern_buffer size_t re_nsub; /* Zero if this pattern cannot match the empty string, one else. - Well, in truth it's used only in `re_search_2', to see whether or + Well, in truth it's used only in 're_search_2', to see whether or not we should use the fastmap, so we don't set this absolutely - perfectly; see `re_compile_fastmap' (the `duplicate' case). */ + perfectly; see 're_compile_fastmap' (the "duplicate" case). */ unsigned __REPB_PREFIX(can_be_null) : 1; - /* If REGS_UNALLOCATED, allocate space in the `regs' structure - for `max (RE_NREGS, re_nsub + 1)' groups. + /* If REGS_UNALLOCATED, allocate space in the 'regs' structure + for 'max (RE_NREGS, re_nsub + 1)' groups. If REGS_REALLOCATE, reallocate space if necessary. If REGS_FIXED, use what's there. */ #ifdef __USE_GNU @@ -401,11 +456,11 @@ struct re_pattern_buffer #endif unsigned __REPB_PREFIX(regs_allocated) : 2; - /* Set to zero when `regex_compile' compiles a pattern; set to one - by `re_compile_fastmap' if it updates the fastmap. */ + /* Set to zero when 're_compile_pattern' compiles a pattern; set to + one by 're_compile_fastmap' if it updates the fastmap. */ unsigned __REPB_PREFIX(fastmap_accurate) : 1; - /* If set, `re_match_2' does not return information about + /* If set, 're_match_2' does not return information about subexpressions. */ unsigned __REPB_PREFIX(no_sub) : 1; @@ -423,7 +478,17 @@ struct re_pattern_buffer typedef struct re_pattern_buffer regex_t; /* Type for byte offsets within the string. POSIX mandates this. */ +#ifdef _REGEX_LARGE_OFFSETS +/* POSIX 1003.1-2008 requires that regoff_t be at least as wide as + ptrdiff_t and ssize_t. We don't know of any hosts where ptrdiff_t + is wider than ssize_t, so ssize_t is safe. ptrdiff_t is not + visible here, so use ssize_t. */ +typedef ssize_t regoff_t; +#else +/* The traditional GNU regex implementation mishandles strings longer + than INT_MAX. */ typedef int regoff_t; +#endif #ifdef __USE_GNU @@ -431,15 +496,15 @@ typedef int regoff_t; regex.texinfo for a full description of what registers match. */ struct re_registers { - unsigned num_regs; + __re_size_t num_regs; regoff_t *start; regoff_t *end; }; -/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer, - `re_match_2' returns information about at least this many registers - the first time a `regs' structure is passed. */ +/* If 'regs_allocated' is REGS_UNALLOCATED in the pattern buffer, + 're_match_2' returns information about at least this many registers + the first time a 'regs' structure is passed. */ # ifndef RE_NREGS # define RE_NREGS 30 # endif @@ -447,7 +512,7 @@ struct re_registers /* POSIX specification for registers. Aside from the different names than - `re_registers', POSIX uses an array of structures, instead of a + 're_registers', POSIX uses an array of structures, instead of a structure of arrays. */ typedef struct { @@ -459,17 +524,17 @@ typedef struct #ifdef __USE_GNU /* Sets the current default syntax to SYNTAX, and return the old syntax. - You can also simply assign to the `re_syntax_options' variable. */ + You can also simply assign to the 're_syntax_options' variable. */ extern reg_syntax_t re_set_syntax (reg_syntax_t __syntax); /* Compile the regular expression PATTERN, with length LENGTH - and syntax given by the global `re_syntax_options', into the buffer + and syntax given by the global 're_syntax_options', into the buffer BUFFER. Return NULL if successful, and an error string if not. - To free the allocated storage, you must call `regfree' on BUFFER. - Note that the translate table must either have been initialised by - `regcomp', with a malloc'ed value, or set to NULL before calling - `regfree'. */ + To free the allocated storage, you must call 'regfree' on BUFFER. + Note that the translate table must either have been initialized by + 'regcomp', with a malloc'ed value, or set to NULL before calling + 'regfree'. */ extern const char *re_compile_pattern (const char *__pattern, size_t __length, struct re_pattern_buffer *__buffer); @@ -485,47 +550,52 @@ extern int re_compile_fastmap (struct re_pattern_buffer *__buffer); characters. Return the starting position of the match, -1 for no match, or -2 for an internal error. Also return register information in REGS (if REGS and BUFFER->no_sub are nonzero). */ -extern int re_search (struct re_pattern_buffer *__buffer, const char *__string, - int __length, int __start, int __range, - struct re_registers *__regs); +extern regoff_t re_search (struct re_pattern_buffer *__buffer, + const char *__String, regoff_t __length, + regoff_t __start, regoff_t __range, + struct re_registers *__regs); -/* Like `re_search', but search in the concatenation of STRING1 and +/* Like 're_search', but search in the concatenation of STRING1 and STRING2. Also, stop searching at index START + STOP. */ -extern int re_search_2 (struct re_pattern_buffer *__buffer, - const char *__string1, int __length1, - const char *__string2, int __length2, int __start, - int __range, struct re_registers *__regs, int __stop); +extern regoff_t re_search_2 (struct re_pattern_buffer *__buffer, + const char *__string1, regoff_t __length1, + const char *__string2, regoff_t __length2, + regoff_t __start, regoff_t __range, + struct re_registers *__regs, + regoff_t __stop); -/* Like `re_search', but return how many characters in STRING the regexp +/* Like 're_search', but return how many characters in STRING the regexp in BUFFER matched, starting at position START. */ -extern int re_match (struct re_pattern_buffer *__buffer, const char *__string, - int __length, int __start, struct re_registers *__regs); +extern regoff_t re_match (struct re_pattern_buffer *__buffer, + const char *__String, regoff_t __length, + regoff_t __start, struct re_registers *__regs); -/* Relates to `re_match' as `re_search_2' relates to `re_search'. */ -extern int re_match_2 (struct re_pattern_buffer *__buffer, - const char *__string1, int __length1, - const char *__string2, int __length2, int __start, - struct re_registers *__regs, int __stop); +/* Relates to 're_match' as 're_search_2' relates to 're_search'. */ +extern regoff_t re_match_2 (struct re_pattern_buffer *__buffer, + const char *__string1, regoff_t __length1, + const char *__string2, regoff_t __length2, + regoff_t __start, struct re_registers *__regs, + regoff_t __stop); /* Set REGS to hold NUM_REGS registers, storing them in STARTS and ENDS. Subsequent matches using BUFFER and REGS will use this memory for recording register information. STARTS and ENDS must be - allocated with malloc, and must each be at least `NUM_REGS * sizeof + allocated with malloc, and must each be at least 'NUM_REGS * sizeof (regoff_t)' bytes long. If NUM_REGS == 0, then subsequent matches should allocate their own register data. Unless this function is called, the first search or match using - PATTERN_BUFFER will allocate its own register data, without + BUFFER will allocate its own register data, without freeing the old data. */ extern void re_set_registers (struct re_pattern_buffer *__buffer, struct re_registers *__regs, - unsigned int __num_regs, + __re_size_t __num_regs, regoff_t *__starts, regoff_t *__ends); #endif /* Use GNU */ @@ -537,39 +607,46 @@ extern int re_exec (const char *); # endif #endif -/* GCC 2.95 and later have "__restrict"; C99 compilers have - "restrict", and "configure" may have defined "restrict". */ -#ifndef __restrict -# if ! (2 < __GNUC__ || (2 == __GNUC__ && 95 <= __GNUC_MINOR__)) -# if defined restrict || 199901L <= __STDC_VERSION__ -# define __restrict restrict -# else -# define __restrict -# endif +/* For plain 'restrict', use glibc's __restrict if defined. + Otherwise, GCC 2.95 and later have "__restrict"; C99 compilers have + "restrict", and "configure" may have defined "restrict". + Other compilers use __restrict, __restrict__, and _Restrict, and + 'configure' might #define 'restrict' to those words, so pick a + different name. */ +#ifndef _Restrict_ +# if defined __restrict || 2 < __GNUC__ + (95 <= __GNUC_MINOR__) +# define _Restrict_ __restrict +# elif 199901L <= __STDC_VERSION__ || defined restrict +# define _Restrict_ restrict +# else +# define _Restrict_ # endif #endif -/* gcc 3.1 and up support the [restrict] syntax. */ -#ifndef __restrict_arr -# if (__GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 1)) \ - && !defined __GNUG__ -# define __restrict_arr __restrict +/* For [restrict], use glibc's __restrict_arr if available. + Otherwise, GCC 3.1 (not in C++ mode) and C99 support [restrict]. */ +#ifndef _Restrict_arr_ +# ifdef __restrict_arr +# define _Restrict_arr_ __restrict_arr +# elif ((199901L <= __STDC_VERSION__ || 3 < __GNUC__ + (1 <= __GNUC_MINOR__)) \ + && !defined __GNUG__) +# define _Restrict_arr_ _Restrict_ # else -# define __restrict_arr +# define _Restrict_arr_ # endif #endif /* POSIX compatibility. */ -extern int regcomp (regex_t *__restrict __preg, - const char *__restrict __pattern, +extern int regcomp (regex_t *_Restrict_ __preg, + const char *_Restrict_ __pattern, int __cflags); -extern int regexec (const regex_t *__restrict __preg, - const char *__restrict __string, size_t __nmatch, - regmatch_t __pmatch[__restrict_arr], +extern int regexec (const regex_t *_Restrict_ __preg, + const char *_Restrict_ __String, size_t __nmatch, + regmatch_t __pmatch[_Restrict_arr_], int __eflags); -extern size_t regerror (int __errcode, const regex_t *__restrict __preg, - char *__restrict __errbuf, size_t __errbuf_size); +extern size_t regerror (int __errcode, const regex_t *_Restrict_ __preg, + char *_Restrict_ __errbuf, size_t __errbuf_size); extern void regfree (regex_t *__preg); |