diff options
Diffstat (limited to 'manual')
| -rw-r--r-- | manual/texinfo.tex | 360 |
1 files changed, 188 insertions, 172 deletions
diff --git a/manual/texinfo.tex b/manual/texinfo.tex index 99113dd71b..b0a1cfc3e7 100644 --- a/manual/texinfo.tex +++ b/manual/texinfo.tex @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2002-03-01.06} +\def\texinfoversion{2002-06-04.06} % % Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, % 2000, 01, 02 Free Software Foundation, Inc. @@ -53,7 +53,7 @@ % texindex foo.?? % tex foo.texi % tex foo.texi -% dvips foo.dvi -o # or whatever, to process the dvi file; this makes foo.ps. +% dvips foo.dvi -o # or whatever; this makes foo.ps. % The extra TeX runs get the cross-reference information correct. % Sometimes one run after texindex suffices, and sometimes you need more % than two; texi2dvi does it as many times as necessary. @@ -846,7 +846,6 @@ where each line of input produces a line of output.} % @math gets a chance to work. This could perhaps be fixed, but for now % at least we can have real math in the main text, where it's needed most. % -% \let\implicitmath = $%$ font-lock fix % % One complication: _ usually means subscripts, but it could also mean @@ -857,10 +856,22 @@ where each line of input produces a line of output.} {\catcode95 = \active % 95 = _ \gdef\mathunderscore{% \catcode95=\active - \def_{\ifnum\fam=\slfam\_\else\sb\fi}% + \def_{\ifnum\fam=\slfam \_\else\sb\fi}% }} % -\def\math{\tex\mathcode`\_="8000\mathunderscore \implicitmath\finishmath} +% Another complication: we want \\ (and @\) to output a \ character. +% FYI, plain.tex uses \\ as a temporary control sequence (why?), but +% this is not advertised and we don't care. Texinfo does not +% otherwise define @\. +% +% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. +\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} +% +\def\math{% + \tex + \mathcode`\_="8000 \mathunderscore + \let\\ = \mathbackslash + \implicitmath\finishmath} \def\finishmath#1{#1\implicitmath\Etex} % @bullet and @minus need the same treatment as @math, just above. @@ -987,11 +998,11 @@ where each line of input produces a line of output.} \let\appendixentry = \chapentry \def\unnumbchapentry ##1##2{} \def\secentry ##1##2##3##4{\advancenumber{chap##2}} - \def\unnumbsecentry ##1##2{} + \def\unnumbsecentry ##1##2##3{\advancenumber{chap##2}} \def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}} - \def\unnumbsubsecentry ##1##2{} + \def\unnumbsubsecentry ##1##2##3##4{\advancenumber{sec##2.##3}} \def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}} - \def\unnumbsubsubsecentry ##1##2{} + \def\unnumbsubsubsecentry ##1##2##3##4##5{\advancenumber{subsec##2.##3.##4}} \input \jobname.toc \def\chapentry ##1##2##3{% \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}} @@ -1000,16 +1011,16 @@ where each line of input produces a line of output.} \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} \def\secentry ##1##2##3##4{% \pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}} - \def\unnumbsecentry ##1##2{% - \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} + \def\unnumbsecentry ##1##2##3{% + \pdfoutline goto name{\pdfmkpgn{##3}}{##1}} \def\subsecentry ##1##2##3##4##5{% \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}} - \def\unnumbsubsecentry ##1##2{% - \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} + \def\unnumbsubsecentry ##1##2##3##4{% + \pdfoutline goto name{\pdfmkpgn{##4}}{##1}} \def\subsubsecentry ##1##2##3##4##5##6{% \pdfoutline goto name{\pdfmkpgn{##6}}{##1}} - \def\unnumbsubsubsecentry ##1##2{% - \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} + \def\unnumbsubsubsecentry ##1##2##3##4##5{% + \pdfoutline goto name{\pdfmkpgn{##5}}{##1}} \input \jobname.toc \endgroup\fi }} @@ -1431,11 +1442,19 @@ where each line of input produces a line of output.} \def\realdash{-} \def\codedash{-\discretionary{}{}{}} -\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}} +\def\codeunder{% + % this is all so @math{@code{var_name}+1} can work. In math mode, _ + % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.) + % will therefore expand the active definition of _, which is us + % (inside @code that is), therefore an endless loop. + \ifusingtt{\ifmmode + \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_. + \else\normalunderscore \fi + \discretionary{}{}{}}% + {\_}% +} \def\codex #1{\tclose{#1}\endgroup} -%\let\exp=\tclose %Was temporary - % @kbd is like @code, except that if the argument is just one @key command, % then @kbd has no effect. @@ -1637,8 +1656,6 @@ where each line of input produces a line of output.} \global\let\contents = \relax \global\let\shortcontents = \relax \fi - % - \ifpdf \pdfmakepagedesttrue \fi } \def\finishtitlepage{% @@ -2396,20 +2413,19 @@ width0pt\relax} \fi \let\item = \relax } -% Ignore @ignore ... @end ignore. +% Ignore @ignore, @ifhtml, @ifinfo, @ifplaintext, @ifnottex, @html, @menu, +% @direntry, and @documentdescription. % \def\ignore{\doignore{ignore}} - -% Also ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, -% @documentdescription, and @direntry text. -% -\def\ifinfo{\doignore{ifinfo}} \def\ifhtml{\doignore{ifhtml}} +\def\ifinfo{\doignore{ifinfo}} +\def\ifplaintext{\doignore{ifplaintext}} \def\ifnottex{\doignore{ifnottex}} \def\html{\doignore{html}} \def\menu{\doignore{menu}} -\def\documentdescription{\doignore{documentdescription}} \def\direntry{\doignore{direntry}} +\def\documentdescription{\doignore{documentdescription}} +\def\documentdescriptionword{documentdescription} % @dircategory CATEGORY -- specify a category of the dir file % which this file should belong to. Ignore this in TeX. @@ -2436,14 +2452,21 @@ width0pt\relax} \fi % We must not have @c interpreted as a control sequence. \catcode`\@ = 12 % - % Make the letter c a comment character so that the rest of the line - % will be ignored. This way, the document can have (for example) - % @c @end ifinfo - % and the @end ifinfo will be properly ignored. - % (We've just changed @ to catcode 12.) - \catcode`\c = 14 + \def\ignoreword{#1}% + \ifx\ignoreword\documentdescriptionword + % The c kludge breaks documentdescription, since + % `documentdescription' contains a `c'. Means not everything will + % be ignored inside @documentdescription, but oh well... + \else + % Make the letter c a comment character so that the rest of the line + % will be ignored. This way, the document can have (for example) + % @c @end ifinfo + % and the @end ifinfo will be properly ignored. + % (We've just changed @ to catcode 12.) + \catcode`\c = 14 + \fi % - % And now expand that command. + % And now expand the command defined above. \doignoretext } @@ -2634,19 +2657,21 @@ width0pt\relax} \fi \def\ifclearfail{\nestedignore{ifclear}} \defineunmatchedend{ifclear} -% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text -% following, through the first @end iftex (etc.). Make `@end iftex' -% (etc.) valid only after an @iftex. +% @iftex, @ifnothtml, @ifnotinfo, @ifnotplaintext always succeed; we +% read the text following, through the first @end iftex (etc.). Make +% `@end iftex' (etc.) valid only after an @iftex. % \def\iftex{\conditionalsucceed{iftex}} \def\ifnothtml{\conditionalsucceed{ifnothtml}} \def\ifnotinfo{\conditionalsucceed{ifnotinfo}} +\def\ifnotplaintext{\conditionalsucceed{ifnotplaintext}} \defineunmatchedend{iftex} \defineunmatchedend{ifnothtml} \defineunmatchedend{ifnotinfo} +\defineunmatchedend{ifnotplaintext} -% We can't just want to start a group at @iftex (for example) and end it -% at @end iftex, since then @set commands inside the conditional have no +% We can't just want to start a group at @iftex (etc.) and end it at +% @end iftex, since then @set commands inside the conditional have no % effect (they'd get reverted at the end of the group). So we must % define \Eiftex to redefine itself to be its previous value. (We can't % just define it to fail again with an ``unmatched end'' error, since @@ -2861,7 +2886,7 @@ width0pt\relax} \fi % If an index command is used in an @example environment, any spaces % therein should become regular spaces in the raw index file, not the -% expansion of \tie (\\leavevmode \penalty \@M \ ). +% expansion of \tie (\leavevmode \penalty \@M \ ). {\obeyspaces \gdef\unsepspaces{\obeyspaces\let =\space}} @@ -3613,7 +3638,8 @@ width0pt\relax} \fi \def\unnumberedseczzz #1{% \plainsecheading {#1}\gdef\thissection{#1}% \toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry{\the\toks0}}}% +\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry% + {\the\toks0}{\the\chapno}}}% \temp \unnumbnoderef \nobreak @@ -3652,7 +3678,7 @@ width0pt\relax} \fi \plainsubsecheading {#1}\gdef\thissection{#1}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsecentry% - {\the\toks0}}}% + {\the\toks0}{\the\chapno}{\the\secno}}}% \temp \unnumbnoderef \nobreak @@ -3693,7 +3719,7 @@ width0pt\relax} \fi \plainsubsubsecheading {#1}\gdef\thissection{#1}% \toks0 = {#1}% \edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsubsecentry% - {\the\toks0}}}% + {\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}}}% \temp \unnumbnoderef \nobreak @@ -3905,7 +3931,7 @@ width0pt\relax} \fi % argument, which will end up as the last argument to the \...entry macro. % % We open the .toc file here instead of at @setfilename or any other -% given time so that @contents can be put in the document anywhere. +% fixed time so that @contents can be put in the document anywhere. % \newif\iftocfileopened \def\writetocentry#1{% @@ -3914,6 +3940,14 @@ width0pt\relax} \fi \global\tocfileopenedtrue \fi \iflinks \write\tocfile{#1{\folio}}\fi + % + % Tell \shipout to create a page destination if we're doing pdf, which + % will be the target of the links in the table of contents. We can't + % just do it on every page because the title pages are numbered 1 and + % 2 (the page numbers aren't printed), and so are the first two pages + % of the document. Thus, we'd have two destinations named `1', and + % two named `2'. + \ifpdf \pdfmakepagedesttrue \fi } \newskip\contentsrightmargin \contentsrightmargin=1in @@ -3978,11 +4012,11 @@ width0pt\relax} \fi \hyphenpenalty = 10000 \advance\baselineskip by 1pt % Open it up a little. \def\secentry ##1##2##3##4{} - \def\unnumbsecentry ##1##2{} + \def\unnumbsecentry ##1##2##3{} \def\subsecentry ##1##2##3##4##5{} - \def\unnumbsubsecentry ##1##2{} + \def\unnumbsubsecentry ##1##2##3##4{} \def\subsubsecentry ##1##2##3##4##5##6{} - \def\unnumbsubsubsecentry ##1##2{} + \def\unnumbsubsubsecentry ##1##2##3##4##5{} \openin 1 \jobname.toc \ifeof 1 \else \closein 1 @@ -4044,16 +4078,16 @@ width0pt\relax} \fi % Sections. \def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}} -\def\unnumbsecentry#1#2{\dosecentry{#1}{#2}} +\def\unnumbsecentry#1#2#3{\dosecentry{#1}{#3}} % Subsections. \def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}} -\def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}} +\def\unnumbsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}} % And subsubsections. \def\subsubsecentry#1#2#3#4#5#6{% \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}} -\def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}} +\def\unnumbsubsubsecentry#1#2#3#4#5{\dosubsubsecentry{#1}{#5}} % This parameter controls the indentation of the various levels. \newdimen\tocindent \tocindent = 3pc @@ -4114,36 +4148,27 @@ width0pt\relax} \fi \message{environments,} % @foo ... @end foo. +% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. +% % Since these characters are used in examples, it should be an even number of % \tt widths. Each \tt character is 1en, so two makes it 1em. -% Furthermore, these definitions must come after we define our fonts. -\newbox\dblarrowbox \newbox\longdblarrowbox -\newbox\pushcharbox \newbox\bullbox -\newbox\equivbox \newbox\errorbox - -%{\tentt -%\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil} -%\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil} -%\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil} -%\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil} -% Adapted from the manmac format (p.420 of TeXbook) -%\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex -% depth .1ex\hfil} -%} - -% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. +% \def\point{$\star$} \def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} \def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}} \def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} \def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}} +% The @error{} command. % Adapted from the TeXbook's \boxit. +% +\newbox\errorbox +% {\tentt \global\dimen0 = 3em}% Width of the box. \dimen2 = .55pt % Thickness of rules % The text. (`r' is open on the right, `e' somewhat less so on the left.) \setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt} - +% \global\setbox\errorbox=\hbox to \dimen0{\hfil \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. \advance\hsize by -2\dimen2 % Rules. @@ -4154,8 +4179,7 @@ width0pt\relax} \fi \kern3pt\vrule width\dimen2}% Space to right. \hrule height\dimen2} \hfil} - -% The @error{} command. +% \def\error{\leavevmode\lower.7ex\copy\errorbox} % @tex ... @end tex escapes into raw Tex temporarily. @@ -4195,9 +4219,9 @@ width0pt\relax} \fi \def\@{@}% \let\Etex=\endgroup} -% Define @lisp ... @endlisp. +% Define @lisp ... @end lisp. % @lisp does a \begingroup so it can rebind things, -% including the definition of @endlisp (which normally is erroneous). +% including the definition of @end lisp (which normally is erroneous). % Amount to narrow the margins by for @lisp. \newskip\lispnarrowing \lispnarrowing=0.4in @@ -4595,6 +4619,21 @@ width0pt\relax} \fi \endgroup\nonfillfinish\endgroup } +% @copying ... @end copying. +% Save the text away for @insertcopying later. +% +\newbox\copyingbox +% +\def\copying{\begingroup + \parindent = 0pt % looks wrong on title page + \def\Ecopying{\egroup\endgroup}% + \global\setbox\copyingbox = \vbox\bgroup +} + +% @insertcopying. +% +\def\insertcopying{\unvcopy\copyingbox} + \message{defuns,} % @defun etc. @@ -4691,56 +4730,60 @@ width0pt\relax} \fi {\df #1}\enskip % Generate function name } -% Actually process the body of a definition -% #1 should be the terminating control sequence, such as \Edefun. -% #2 should be the "another name" control sequence, such as \defunx. -% #3 should be the control sequence that actually processes the header, -% such as \defunheader. - -\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2{\begingroup\obeylines\activeparens\spacesplit#3}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup % -\catcode 61=\active % 61 is `=' -\obeylines\activeparens\spacesplit#3} - +% Common pieces to start any @def... % #1 is the \E... control sequence to end the definition (which we define). -% #2 is the \...x control sequence for consecutive fns (which we define). -% #3 is the control sequence to call to resume processing. +% #2 is the \...x control sequence (which our caller defines). +% #3 is the control sequence to process the header, such as \defunheader. +% +\def\parsebodycommon#1#2#3{% + \begingroup\inENV + % If there are two @def commands in a row, we'll have a \nobreak, + % which is there to keep the function description together with its + % header. But if there's nothing but headers, we want to allow a + % break after all. + \ifnum\lastpenalty = 10000 \penalty0 \fi + \medbreak + % + % Define the \E... end token that this defining construct specifies + % so that it will exit this group. + \def#1{\endgraf\endgroup\medbreak}% + % + \parindent=0in + \advance\leftskip by \defbodyindent + \exdentamount=\defbodyindent +} + +% Process body of @defun, @deffn, @defmac, etc. +% +\def\defparsebody#1#2#3{% + \parsebodycommon{#1}{#2}{#3}% + \def#2{\begingroup\obeylines\activeparens\spacesplit#3}% + \catcode61=\active % 61 is `=' + \begingroup\obeylines\activeparens + \spacesplit#3% +} + +% #1, #2, #3 are the common arguments (see \defparsebody). % #4, delimited by the space, is the class name. % -\def\defmethparsebody#1#2#3#4 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#4}}} +\def\defmethparsebody#1#2#3#4 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% + \begingroup\obeylines\activeparens + \spacesplit{#3{#4}}% +} % Used for @deftypemethod and @deftypeivar. -% #1 is the \E... control sequence to end the definition (which we define). -% #2 is the \...x control sequence for consecutive fns (which we define). -% #3 is the control sequence to call to resume processing. +% #1, #2, #3 are the common arguments (see \defparsebody). % #4, delimited by a space, is the class name. % #5 is the method's return type. % -\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV - \medbreak - \def#1{\endgraf\endgroup\medbreak}% +\def\deftypemethparsebody#1#2#3#4 #5 {% + \parsebodycommon{#1}{#2}{#3}% \def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}% - \parindent=0in - \advance\leftskip by \defbodyindent - \exdentamount=\defbodyindent - \begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}} + \begingroup\obeylines\activeparens + \spacesplit{#3{#4}{#5}}% +} % Used for @deftypeop. The change from \deftypemethparsebody is an % extra argument at the beginning which is the `category', instead of it @@ -4749,64 +4792,49 @@ width0pt\relax} \fi % input at hand. Thus also need a control sequence (passed as #5) for % the \E... definition to assign the category name to. % -\def\deftypeopparsebody#1#2#3#4#5 #6 {\begingroup\inENV - \medbreak - \def#1{\endgraf\endgroup\medbreak}% +\def\deftypeopparsebody#1#2#3#4#5 #6 {% + \parsebodycommon{#1}{#2}{#3}% \def#2##1 ##2 ##3 {% \def#4{##1}% \begingroup\obeylines\activeparens\spacesplit{#3{##2}{##3}}}% - \parindent=0in - \advance\leftskip by \defbodyindent - \exdentamount=\defbodyindent - \begingroup\obeylines\activeparens\spacesplit{#3{#5}{#6}}} - -\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 ##2 {\def#4{##1}% -\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#5}}} + \begingroup\obeylines\activeparens + \spacesplit{#3{#5}{#6}}% +} + +% For @defop. +\def\defopparsebody #1#2#3#4#5 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 ##2 {\def#4{##1}% + \begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% + \begingroup\obeylines\activeparens + \spacesplit{#3{#5}}% +} % These parsing functions are similar to the preceding ones % except that they do not make parens into active characters. % These are used for "variables" since they have no arguments. - -\def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2{\begingroup\obeylines\spacesplit#3}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup % -\catcode 61=\active % -\obeylines\spacesplit#3} - -% This is used for \def{tp,vr}parsebody. It could probably be used for -% some of the others, too, with some judicious conditionals. % -\def\parsebodycommon#1#2#3{% - \begingroup\inENV % - \medbreak % - % Define the end token that this defining construct specifies - % so that it will exit this group. - \def#1{\endgraf\endgroup\medbreak}% - \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% - \parindent=0in - \advance\leftskip by \defbodyindent - \exdentamount=\defbodyindent +\def\defvarparsebody #1#2#3{% + \parsebodycommon{#1}{#2}{#3}% + \def#2{\begingroup\obeylines\spacesplit#3}% + \catcode61=\active % \begingroup\obeylines + \spacesplit#3% +} + +% @defopvar. +\def\defopvarparsebody #1#2#3#4#5 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 ##2 {\def#4{##1}% + \begingroup\obeylines\spacesplit{#3{##2}}}% + \begingroup\obeylines + \spacesplit{#3{#5}}% } \def\defvrparsebody#1#2#3#4 {% \parsebodycommon{#1}{#2}{#3}% + \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% + \begingroup\obeylines \spacesplit{#3{#4}}% } @@ -4821,6 +4849,8 @@ width0pt\relax} \fi % \def\deftpparsebody #1#2#3#4 {% \parsebodycommon{#1}{#2}{#3}% + \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% + \begingroup\obeylines \spacesplit{\parsetpheaderline{#3{#4}}}\empty } @@ -4837,33 +4867,19 @@ width0pt\relax} \fi #1{\removeemptybraces#2\relax}{#3}% }% -\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 ##2 {\def#4{##1}% -\begingroup\obeylines\spacesplit{#3{##2}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\spacesplit{#3{#5}}} - % Split up #2 at the first space token. % call #1 with two arguments: % the first is all of #2 before the space token, % the second is all of #2 after that space token. % If #2 contains no space token, all of it is passed as the first arg % and the second is passed as empty. - +% {\obeylines \gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}% \long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{% \ifx\relax #3% #1{#2}{}\else #1{#2}{#3#4}\fi}} -% So much for the things common to all kinds of definitions. - % Define @defun. % First, define the processing that is wanted for arguments of \defun @@ -5273,7 +5289,7 @@ width0pt\relax} \fi \message{Warning: redefining \the\macname}% \else \expandafter\ifx\csname \the\macname\endcsname \relax - \else \errmessage{The name \the\macname\space is reserved}\fi + \else \errmessage{Macro name \the\macname\space already defined}\fi \global\cslet{macsave.\the\macname}{\the\macname}% \global\expandafter\let\csname ismacro.\the\macname\endcsname=1% % Add the macroname to \macrolist |