diff options
Diffstat (limited to 'manual')
| -rw-r--r-- | manual/texinfo.tex | 638 |
1 files changed, 381 insertions, 257 deletions
diff --git a/manual/texinfo.tex b/manual/texinfo.tex index 7421f884d2..c49af9f4ed 100644 --- a/manual/texinfo.tex +++ b/manual/texinfo.tex @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{1999-05-25.6}% +\def\texinfoversion{1999-09-25.10} % % Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 % Free Software Foundation, Inc. @@ -29,15 +29,15 @@ % % Please try the latest version of texinfo.tex before submitting bug % reports; you can get the latest version from: -% ftp://ftp.gnu.org/pub/gnu/texinfo.tex +% ftp://ftp.gnu.org/gnu/texinfo.tex % (and all GNU mirrors, see http://www.gnu.org/order/ftp.html) -% ftp://tug.org/tex/texinfo.tex -% ftp://ctan.org/macros/texinfo/texinfo.tex -% (and all CTAN mirrors, finger ctan@ctan.org for a list). +% ftp://texinfo.org/tex/texinfo.tex +% ftp://us.ctan.org/macros/texinfo/texinfo.tex +% (and all CTAN mirrors, finger ctan@us.ctan.org for a list). % /home/gd/gnu/doc/texinfo.tex on the GNU machines. % The texinfo.tex in any given Texinfo distribution could well be out % of date, so if that's what you're using, please check. -% There is a small home page for Texinfo at http://texinfo.org/. +% Texinfo has a small home page at http://texinfo.org/. % % Send bug reports to bug-texinfo@gnu.org. Please include including a % complete document in each bug report with which we can reproduce the @@ -86,14 +86,6 @@ % For @tex, we can use \tabalign. \let\+ = \relax -% Get ready for pdf. -\newif\ifpdf -\ifx\pdfoutput\undefined\else - \input pdfcolor - \pdfoutput=1 - \pdftrue -\fi - \message{Basics,} \chardef\other=12 @@ -251,7 +243,7 @@ \unvbox\footlinebox \fi % - \ifpdf\pdfmkdest{\the\pageno}\fi + \ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi % \ifcropmarks \egroup % end of \vbox\bgroup @@ -607,36 +599,42 @@ where each line of input produces a line of output.} %}} \def\needx#1{% - % Go into vertical mode, so we don't make a big box in the middle of a + % Ensure vertical mode, so we don't make a big box in the middle of a % paragraph. \par % - % Don't add any leading before our big empty box, but allow a page - % break, since the best break might be right here. - \allowbreak - \nointerlineskip - \vtop to #1\mil{\vfil}% - % - % TeX does not even consider page breaks if a penalty added to the - % main vertical list is 10000 or more. But in order to see if the - % empty box we just added fits on the page, we must make it consider - % page breaks. On the other hand, we don't want to actually break the - % page after the empty box. So we use a penalty of 9999. - % - % There is an extremely small chance that TeX will actually break the - % page at this \penalty, if there are no other feasible breakpoints in - % sight. (If the user is using lots of big @group commands, which - % almost-but-not-quite fill up a page, TeX will have a hard time doing - % good page breaking, for example.) However, I could not construct an - % example where a page broke at this \penalty; if it happens in a real - % document, then we can reconsider our strategy. - \penalty9999 - % - % Back up by the size of the box, whether we did a page break or not. - \kern -#1\mil - % - % Do not allow a page break right after this kern. - \nobreak + % If the @need value is less than one line space, it's useless. + \dimen0 = #1\mil + \dimen2 = \ht\strutbox + \advance\dimen2 by \dp\strutbox + \ifdim\dimen0 > \dimen2 + % + % Do a \strut just to make the height of this box be normal, so the + % normal leading is inserted relative to the preceding line. + % And a page break here is fine. + \vtop to #1\mil{\strut\vfil}% + % + % TeX does not even consider page breaks if a penalty added to the + % main vertical list is 10000 or more. But in order to see if the + % empty box we just added fits on the page, we must make it consider + % page breaks. On the other hand, we don't want to actually break the + % page after the empty box. So we use a penalty of 9999. + % + % There is an extremely small chance that TeX will actually break the + % page at this \penalty, if there are no other feasible breakpoints in + % sight. (If the user is using lots of big @group commands, which + % almost-but-not-quite fill up a page, TeX will have a hard time doing + % good page breaking, for example.) However, I could not construct an + % example where a page broke at this \penalty; if it happens in a real + % document, then we can reconsider our strategy. + \penalty9999 + % + % Back up by the size of the box, whether we did a page break or not. + \kern -#1\mil + % + % Do not allow a page break right after this kern. + \nobreak + \fi } % @br forces paragraph break @@ -852,123 +850,175 @@ where each line of input produces a line of output.} \message{pdf,} % adobe `portable' document format - \newcount\tempnum \newcount\lnkcount \newtoks\filename \newcount\filenamelength \newcount\pgn - -\ifpdf -\def\pdfmkdest#1{\pdfdest name{#1@} xyz} -\def\pdfmkpgn#1{#1@} - -% Adding outlines to PDF; macros for calculating structure of outlines -% come from Petr Olsak -\def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% - \else \csname#1\endcsname \fi} -\def\advancenumber#1{\tempnum=\expnumber{#1}\relax - \advance\tempnum by1 - \expandafter\xdef\csname#1\endcsname{\the\tempnum}} -\def\pdfmakeoutlines{{% - \openin 1 \jobname.toc - \ifeof 1\else\bgroup - \closein 1 - \def\code##1{##1} - \def\file##1{##1} - \def\TeX##1{TeX} - \def\tt{} - \def\char{char} - \def\samp##1{##1} - \def\kbd##1{##1} - \def\key##1{##1} - \def\rawbackslashxx{\string\\} - \def\chapentry ##1##2##3{} - \def\unnumbchapentry ##1##2{} - \def\secentry ##1##2##3##4{\advancenumber{chap##2}} - \def\unnumbsecentry ##1##2{} - \def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}} - \def\unnumbsubsecentry ##1##2{} - \def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}} - \def\unnumbsubsubsecentry ##1##2{} - \input \jobname.toc - \def\chapentry ##1##2##3{% - \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}} - \def\unnumbchapentry ##1##2{% - \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} - \def\secentry ##1##2##3##4{% - \pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}} - \def\unnumbsecentry ##1##2{% - \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} - \def\subsecentry ##1##2##3##4##5{% - \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}} - \def\unnumbsubsecentry ##1##2{% - \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} - \def\subsubsecentry ##1##2##3##4##5##6{% - \pdfoutline goto name{\pdfmkpgn{##6}}{##1}} - \def\unnumbsubsubsecentry ##1##2{% - \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} - \input \jobname.toc - \egroup\fi -}} -\pdfmakeoutlines - -\def\makelinks #1,{% - \def\params{#1}\def\E{END}% - \ifx\params\E - \let\nextmakelinks=\relax - \else - \let\nextmakelinks=\makelinks - \ifnum\lnkcount>0,\fi - \picknum{#1}% - \Blue\pdfannotlink attr{/Border [0 0 0]} - goto name{\pdfmkpgn{\the\pgn}}% - #1% - \advance\lnkcount by 1% - \Black\pdfendlink - \fi - \nextmakelinks -} - -\def\picknum#1{\expandafter\pn#1} -\def\pn#1{% - \def\p{#1}% - \ifx\p\lbrace - \let\nextpn=\ppn - \else - \let\nextpn=\ppnn - \def\first{#1} - \fi - \nextpn -} -\def\ppn#1{\pgn=#1\gobble} -\def\ppnn{\pgn=\first} -\def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,} - -\def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} -\def\skipspaces#1{\def\PP{#1}\def\D{|}% - \ifx\PP\D\let\nextsp\relax - \else\let\nextsp\skipspaces - \ifx\p\space\else\addtokens{\filename}{\PP}% - \advance\filenamelength by 1 +\newtoks\toksA +\newtoks\toksB +\newtoks\toksC +\newtoks\toksD +\newbox\boxA +\newcount\countA +\newif\ifpdf +\newif\ifpdfmakepagedest + +\ifx\pdfoutput\undefined + \pdffalse + \let\pdfmkdest = \gobble + \let\pdfurl = \gobble + \let\endlink = \relax + \let\linkcolor = \relax + \let\pdfmakeoutlines = \relax +\else + \pdftrue + \pdfoutput = 1 + \input pdfcolor + \def\dopdfimage#1#2#3{% + \def\imagewidth{#2}% + \def\imageheight{#3}% + \ifnum\pdftexversion < 14 + \pdfimage + \else + \pdfximage + \fi + \ifx\empty\imagewidth\else width \imagewidth \fi + \ifx\empty\imageheight\else height \imageheight \fi + {#1.pdf}% + \ifnum\pdftexversion < 14 \else + \pdfrefximage \pdflastximage + \fi} + \def\pdfmkdest#1{\pdfdest name{#1@} xyz} + \def\pdfmkpgn#1{#1@} + \let\linkcolor = \Cyan + \def\endlink{\Black\pdfendlink} + % Adding outlines to PDF; macros for calculating structure of outlines + % come from Petr Olsak + \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% + \else \csname#1\endcsname \fi} + \def\advancenumber#1{\tempnum=\expnumber{#1}\relax + \advance\tempnum by1 + \expandafter\xdef\csname#1\endcsname{\the\tempnum}} + \def\pdfmakeoutlines{{% + \openin 1 \jobname.toc + \ifeof 1\else\bgroup + \closein 1 + \indexnofonts + \def\tt{} + % thanh's hack / proper braces in bookmarks + \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace + \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace + % + \def\chapentry ##1##2##3{} + \def\unnumbchapentry ##1##2{} + \def\secentry ##1##2##3##4{\advancenumber{chap##2}} + \def\unnumbsecentry ##1##2{} + \def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}} + \def\unnumbsubsecentry ##1##2{} + \def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}} + \def\unnumbsubsubsecentry ##1##2{} + \input \jobname.toc + \def\chapentry ##1##2##3{% + \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}} + \def\unnumbchapentry ##1##2{% + \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} + \def\secentry ##1##2##3##4{% + \pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}} + \def\unnumbsecentry ##1##2{% + \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} + \def\subsecentry ##1##2##3##4##5{% + \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}} + \def\unnumbsubsecentry ##1##2{% + \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} + \def\subsubsecentry ##1##2##3##4##5##6{% + \pdfoutline goto name{\pdfmkpgn{##6}}{##1}} + \def\unnumbsubsubsecentry ##1##2{% + \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} + \input \jobname.toc + \egroup\fi + }} + \def\makelinks #1,{% + \def\params{#1}\def\E{END}% + \ifx\params\E + \let\nextmakelinks=\relax + \else + \let\nextmakelinks=\makelinks + \ifnum\lnkcount>0,\fi + \picknum{#1}% + \startlink attr{/Border [0 0 0]} + goto name{\pdfmkpgn{\the\pgn}}% + \linkcolor #1% + \advance\lnkcount by 1% + \endlink \fi + \nextmakelinks + } + \def\picknum#1{\expandafter\pn#1} + \def\pn#1{% + \def\p{#1}% + \ifx\p\lbrace + \let\nextpn=\ppn + \else + \let\nextpn=\ppnn + \def\first{#1} + \fi + \nextpn + } + \def\ppn#1{\pgn=#1\gobble} + \def\ppnn{\pgn=\first} + \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,} + \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} + \def\skipspaces#1{\def\PP{#1}\def\D{|}% + \ifx\PP\D\let\nextsp\relax + \else\let\nextsp\skipspaces + \ifx\p\space\else\addtokens{\filename}{\PP}% + \advance\filenamelength by 1 + \fi + \fi + \nextsp} + \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax} + \ifnum\pdftexversion < 14 + \let \startlink \pdfannotlink + \else + \let \startlink \pdfstartlink \fi - \nextsp} -\def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax} - -\def\pdflink#1{% - \leavevmode\Red - \begingroup - \normalturnoffactive\def\@{@}% - \pdfannotlink - attr{/Border [0 0 0]}% - user{/Subtype /Link /A << /S /URI /URI (#1) >>}% - \endgroup -} + \def\pdfurl#1{% + \begingroup + \normalturnoffactive\def\@{@}% + \leavevmode\Red + \startlink attr{/Border [0 0 0]}% + user{/Subtype /Link /A << /S /URI /URI (#1) >>}% + % #1 + \endgroup} + \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} + \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} + \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} + \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}} + \def\maketoks{% + \expandafter\poptoks\the\toksA|ENDTOKS| + \ifx\first0\adn0 + \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3 + \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6 + \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9 + \else + \ifnum0=\countA\else\makelink\fi + \ifx\first.\let\next=\done\else + \let\next=\maketoks + \addtokens{\toksB}{\the\toksD} + \ifx\first,\addtokens{\toksB}{\space}\fi + \fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \next} + \def\makelink{\addtokens{\toksB}% + {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} + \def\pdflink#1{% + \startlink attr{/Border [0 0 0]} goto name{\mkpgn{#1}} + \linkcolor #1\endlink} + \def\mkpgn#1{#1@} + \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} +\fi % \ifx\pdfoutput -\else -\let\pdflink = \gobble -\fi % end \ifpdf \message{fonts,} % Font-change commands. @@ -1039,23 +1089,17 @@ where each line of input produces a line of output.} \setfont\deftt\ttshape{10}{\magstep1} \def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf} -% Fonts for indices and small examples (9pt). -% We actually use the slanted font rather than the italic, -% because texinfo normally uses the slanted fonts for that. -% Do not make many font distinctions in general in the index, since they -% aren't very useful. -\setfont\ninett\ttshape{9}{1000} -\setfont\ninettsl\ttslshape{10}{900} -\setfont\indrm\rmshape{9}{1000} -\setfont\indit\itshape{9}{1000} -\setfont\indsl\slshape{9}{1000} -\let\indtt=\ninett -\let\indttsl=\ninettsl -\let\indsf=\indrm -\let\indbf=\indrm -\setfont\indsc\scshape{10}{900} -\font\indi=cmmi9 -\font\indsy=cmsy9 +% Fonts for indices, footnotes, small examples (9pt). +\setfont\smallrm\rmshape{9}{1000} +\setfont\smalltt\ttshape{9}{1000} +\setfont\smallbf\bfshape{10}{900} +\setfont\smallit\itshape{9}{1000} +\setfont\smallsl\slshape{9}{1000} +\setfont\smallsf\sfshape{9}{1000} +\setfont\smallsc\scshape{10}{900} +\setfont\smallttsl\ttslshape{10}{900} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 % Fonts for title page: \setfont\titlerm\rmbshape{12}{\magstep3} @@ -1169,11 +1213,12 @@ where each line of input produces a line of output.} \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl \resetmathfonts \setleading{15pt}} \let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf? -\def\indexfonts{% - \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl - \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc - \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy \let\tenttsl=\indttsl - \resetmathfonts \setleading{12pt}} +\def\smallfonts{% + \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl + \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc + \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy + \let\tenttsl=\smallttsl + \resetmathfonts \setleading{11pt}} % Set up the default fonts, so we can use them for creating boxes. % @@ -1222,9 +1267,9 @@ where each line of input produces a line of output.} } \let\ttfont=\t \def\samp#1{`\tclose{#1}'\null} -\setfont\smallrm\rmshape{8}{1000} -\font\smallsy=cmsy9 -\def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{% +\setfont\keyrm\rmshape{8}{1000} +\font\keysy=cmsy9 +\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% \vbox{\hrule\kern-0.4pt \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% @@ -1335,8 +1380,9 @@ where each line of input produces a line of output.} % a hypertex \special here. % \def\uref#1{\douref #1,,,\finish} -\def\douref#1,#2,#3,#4\finish{% - \pdflink{#1}% +\def\douref#1,#2,#3,#4\finish{\begingroup + \unsepspaces + \pdfurl{#1}% \setbox0 = \hbox{\ignorespaces #3}% \ifdim\wd0 > 0pt \unhbox0 % third arg given, show only that @@ -1352,11 +1398,8 @@ where each line of input produces a line of output.} \code{#1}% only url given, so show it \fi \fi - % - \ifpdf - \Black\pdfendlink - \fi -} + \endlink +\endgroup} % rms does not like angle brackets --karl, 17may97. % So now @email is just like @uref, unless we are pdf. @@ -1364,12 +1407,13 @@ where each line of input produces a line of output.} %\def\email#1{\angleleft{\tt #1}\angleright} \ifpdf \def\email#1{\doemail#1,,\finish} - \def\doemail#1,#2,#3\finish{% - \pdflink{mailto:#1}% + \def\doemail#1,#2,#3\finish{\begingroup + \unsepspaces + \pdfurl{mailto:#1}% \setbox0 = \hbox{\ignorespaces #2}% \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi - \Black\pdfendlink - } + \endlink + \endgroup} \else \let\email=\uref \fi @@ -1491,6 +1535,8 @@ where each line of input produces a line of output.} \global\let\shortcontents = \relax \fi % + \ifpdf \pdfmakepagedesttrue \fi + % \HEADINGSon } @@ -2141,15 +2187,18 @@ where each line of input produces a line of output.} % If so, do nothing. If not, give it an appropriate dimension based on % current baselineskip. \ifdim\multitablelinespace=0pt +\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip +\global\advance\multitablelinespace by-\ht0 %% strut to put in table in case some entry doesn't have descenders, %% to keep lines equally spaced \let\multistrut = \strut -%% Test to see if parskip is larger than space between lines of -%% table. If not, do nothing. -%% If so, set to same dimension as multitablelinespace. \else +%% FIXME: what is \box0 supposed to be? \gdef\multistrut{\vrule height\multitablelinespace depth\dp0 width0pt\relax} \fi +%% Test to see if parskip is larger than space between lines of +%% table. If not, do nothing. +%% If so, set to same dimension as multitablelinespace. \ifdim\multitableparskip>\multitablelinespace \global\multitableparskip=\multitablelinespace \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller @@ -2212,6 +2261,7 @@ width0pt\relax} \fi \let\deftypefn = \relax \let\deftypefun = \relax \let\deftypeivar = \relax + \let\deftypeop = \relax \let\deftypevar = \relax \let\deftypevr = \relax \let\defun = \relax @@ -2355,14 +2405,13 @@ width0pt\relax} \fi % stuff compared to the main input. % \nullfont - \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont - \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont - \let\tensf = \nullfont - % Similarly for index fonts (mostly for their use in - % smallexample) - \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont - \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont - \let\indsf = \nullfont + \let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont + \let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont + \let\tensf=\nullfont + % Similarly for index fonts (mostly for their use in smallexample). + \let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont + \let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont + \let\smallsf=\nullfont % % Don't complain when characters are missing from the fonts. \tracinglostchars = 0 @@ -2626,7 +2675,7 @@ width0pt\relax} \fi \def\@{@}% will be @@ when we switch to @ as escape char. % Need these in case \tex is in effect and \{ is a \delimiter again. % But can't use \lbracecmd and \rbracecmd because texindex assumes -% braces and backslashes are used only as delimiters. +% braces and backslashes are used only as delimiters. \let\{ = \mylbrace \let\} = \myrbrace \def\_{{\realbackslash _}}% @@ -2739,6 +2788,7 @@ width0pt\relax} \fi \let\url=\indexdummyfont \let\uref=\indexdummyfont \let\env=\indexdummyfont +\let\acronym=\indexdummyfont \let\command=\indexdummyfont \let\option=\indexdummyfont \let\file=\indexdummyfont @@ -2892,7 +2942,7 @@ width0pt\relax} \fi \def\doprintindex#1{\begingroup \dobreak \chapheadingskip{10000}% % - \indexfonts \rm + \smallfonts \rm \tolerance = 9500 \indexbreaks % @@ -3019,7 +3069,11 @@ width0pt\relax} \fi % The `\ ' here is removed by the implicit \unskip that TeX does as % part of (the primitive) \par. Without it, a spurious underfull % \hbox ensues. - \ #2% The page number ends the paragraph. + \ifpdf + \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. + \else + \ #2% The page number ends the paragraph. + \fi \fi% \par \endgroup} @@ -3186,12 +3240,44 @@ width0pt\relax} \fi \newcount\subsubsecno \subsubsecno=0 % This counter is funny since it counts through charcodes of letters A, B, ... -% The \the is necessary, despite appearances, because \appendixletter is -% expanded while writing the .toc file. \char\appendixno is not -% expandable, thus it is written literally, thus all appendixes come out -% with the same letter (or @) in the toc without it. \newcount\appendixno \appendixno = `\@ -\def\appendixletter{\char\the\appendixno} +% \def\appendixletter{\char\the\appendixno} +% We do the following for the sake of pdftex, which needs the actual +% letter in the expansion, not just typeset. +\def\appendixletter{% + \ifnum\appendixno=`A A% + \else\ifnum\appendixno=`B B% + \else\ifnum\appendixno=`C C% + \else\ifnum\appendixno=`D D% + \else\ifnum\appendixno=`E E% + \else\ifnum\appendixno=`F F% + \else\ifnum\appendixno=`G G% + \else\ifnum\appendixno=`H H% + \else\ifnum\appendixno=`I I% + \else\ifnum\appendixno=`J J% + \else\ifnum\appendixno=`K K% + \else\ifnum\appendixno=`L L% + \else\ifnum\appendixno=`M M% + \else\ifnum\appendixno=`N N% + \else\ifnum\appendixno=`O O% + \else\ifnum\appendixno=`P P% + \else\ifnum\appendixno=`Q Q% + \else\ifnum\appendixno=`R R% + \else\ifnum\appendixno=`S S% + \else\ifnum\appendixno=`T T% + \else\ifnum\appendixno=`U U% + \else\ifnum\appendixno=`V V% + \else\ifnum\appendixno=`W W% + \else\ifnum\appendixno=`X X% + \else\ifnum\appendixno=`Y Y% + \else\ifnum\appendixno=`Z Z% + % The \the is necessary, despite appearances, because \appendixletter is + % expanded while writing the .toc file. \char\appendixno is not + % expandable, thus it is written literally, thus all appendixes come out + % with the same letter (or @) in the toc without it. + \else\char\the\appendixno + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi} % Each @chapter defines this as the name of the chapter. % page headings and footings can use it. @section does likewise. @@ -3725,6 +3811,7 @@ width0pt\relax} \fi \fi \vfill \eject \contentsalignmacro % in case @setchapternewpage odd is in effect + \pdfmakeoutlines \endgroup \lastnegativepageno = \pageno \pageno = \savepageno @@ -3775,7 +3862,7 @@ width0pt\relax} \fi % See comments in \dochapentry re vbox and related settings \def\shortchapentry#1#2#3{% - \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno{#3}}% + \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}% } % Typeset the label for a chapter or appendix for the short contents. @@ -3783,10 +3870,14 @@ width0pt\relax} \fi % We could simplify the code here by writing out an \appendixentry % command in the toc file for appendices, instead of using \chapentry % for both, but it doesn't seem worth it. -\setbox0 = \hbox{\shortcontrm \putwordAppendix } -\newdimen\shortappendixwidth \shortappendixwidth = \wd0 - +% +\newdimen\shortappendixwidth +% \def\shortchaplabel#1{% + % Compute width of word "Appendix", may change with language. + \setbox0 = \hbox{\shortcontrm \putwordAppendix}% + \shortappendixwidth = \wd0 + % % We typeset #1 in a box of constant width, regardless of the text of % #1, so the chapter titles will come out aligned. \setbox0 = \hbox{#1}% @@ -3801,7 +3892,7 @@ width0pt\relax} \fi } \def\unnumbchapentry#1#2{\dochapentry{#1}{#2}} -\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno{#2}}} +\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno\bgroup#2\egroup}} % Sections. \def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}} @@ -3828,24 +3919,24 @@ width0pt\relax} \fi \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip \begingroup \chapentryfonts - \tocentry{#1}{\dopageno{#2}}% + \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup \nobreak\vskip .25\baselineskip plus.1\baselineskip } \def\dosecentry#1#2{\begingroup \secentryfonts \leftskip=\tocindent - \tocentry{#1}{\dopageno{#2}}% + \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} \def\dosubsecentry#1#2{\begingroup \subsecentryfonts \leftskip=2\tocindent - \tocentry{#1}{\dopageno{#2}}% + \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} \def\dosubsubsecentry#1#2{\begingroup \subsubsecentryfonts \leftskip=3\tocindent - \tocentry{#1}{\dopageno{#2}}% + \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} % Final typesetting of a toc entry; we use the same \entry macro as for @@ -4123,7 +4214,7 @@ width0pt\relax} \fi \def\smalllispx{\begingroup \def\Esmalllisp{\nonfillfinish\endgroup}% \def\Esmallexample{\nonfillfinish\endgroup}% - \indexfonts + \smallfonts \lisp } @@ -4139,7 +4230,7 @@ width0pt\relax} \fi % \def\smalldisplayx{\begingroup \def\Esmalldisplay{\nonfillfinish\endgroup}% - \indexfonts \rm + \smallfonts \rm \display } @@ -4156,7 +4247,7 @@ width0pt\relax} \fi % \def\smallformatx{\begingroup \def\Esmallformat{\nonfillfinish\endgroup}% - \indexfonts \rm + \smallfonts \rm \format } @@ -4326,23 +4417,39 @@ width0pt\relax} \fi \exdentamount=\defbodyindent \begingroup\obeylines\activeparens\spacesplit{#3{#4}}} -% @deftypemethod has an extra argument that nothing else does. Sigh. +% Used for @deftypemethod and @deftypeivar. % #1 is the \E... control sequence to end the definition (which we define). % #2 is the \...x control sequence for consecutive fns (which we define). % #3 is the control sequence to call to resume processing. -% #4, delimited by the space, is the class name. +% #4, delimited by a space, is the class name. % #5 is the method's return type. % -\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}} +\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV + \medbreak + \def#1{\endgraf\endgroup\medbreak}% + \def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}% + \parindent=0in + \advance\leftskip by \defbodyindent + \exdentamount=\defbodyindent + \begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}} + +% Used for @deftypeop. The change from \deftypemethparsebody is an +% extra argument at the beginning which is the `category', instead of it +% being the hardwired string `Method' or `Instance Variable'. We have +% to account for this both in the \...x definition and in parsing the +% input at hand. Thus also need a control sequence (passed as #5) for +% the \E... definition to assign the category name to. +% +\def\deftypeopparsebody#1#2#3#4#5 #6 {\begingroup\inENV + \medbreak + \def#1{\endgraf\endgroup\medbreak}% + \def#2##1 ##2 ##3 {% + \def#4{##1}% + \begingroup\obeylines\activeparens\spacesplit{#3{##2}{##3}}}% + \parindent=0in + \advance\leftskip by \defbodyindent + \exdentamount=\defbodyindent + \begingroup\obeylines\activeparens\spacesplit{#3{#5}{#6}}} \def\defopparsebody #1#2#3#4#5 {\begingroup\inENV % \medbreak % @@ -4558,13 +4665,29 @@ width0pt\relax} \fi \def\defop #1 {\def\defoptype{#1}% \defopparsebody\Edefop\defopx\defopheader\defoptype} % -\def\defopheader #1#2#3{% +\def\defopheader#1#2#3{% \dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index \begingroup\defname {#2}{\defoptype\ \putwordon\ #1}% \defunargs {#3}\endgroup % } -% @deftypemethod CLASS RETURN-TYPE METHOD ARG... +% @deftypeop CATEGORY CLASS TYPE OPERATION ARG... +% +\def\deftypeop #1 {\def\deftypeopcategory{#1}% + \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader + \deftypeopcategory} +% +% #1 is the class name, #2 the data type, #3 the operation name, #4 the args. +\def\deftypeopheader#1#2#3#4{% + \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index + \begingroup + \defname{\defheaderxcond#2\relax$$$#3} + {\deftypeopcategory\ \putwordon\ \code{#1}}% + \deftypefunargs{#4}% + \endgroup +} + +% @deftypemethod CLASS TYPE METHOD ARG... % \def\deftypemethod{% \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader} @@ -4713,6 +4836,7 @@ width0pt\relax} \fi \def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}} \def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}} \def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}} +\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}} \def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}} \def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}} \def\defunx#1 {\errmessage{@defunx in invalid context}} @@ -5000,7 +5124,14 @@ width0pt\relax} \fi % @alias. -\def\alias#1=#2{\gdef#1{#2}} +% We need some trickery to remove the optional spaces around the equal +% sign. Just make them active and then expand them all to nothing. +\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx} +\def\aliasxxx #1{\aliasyyy#1\relax} +\def\aliasyyy #1=#2\relax{\ignoreactivespaces +\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=% + \expandafter\noexpand\csname#2\endcsname}% +\expandafter\endgroup\next} \message{cross references,} @@ -5048,20 +5179,10 @@ width0pt\relax} \fi % @anchor{NAME} -- define xref target at arbitrary point. % -{ \catcode`\@ = 11 -% From latex.ltx, to make @anchor truely invisible. -\newdimen\@savsk -\newcount\@savsf -\gdef\@bsphack{\relax - \ifhmode \@savsk\lastskip \@savsf\spacefactor \fi -} -\gdef\@esphack{\relax - \ifhmode \spacefactor\@savsf - \ifdim\@savsk>\z@ \ignorespaces \fi - \fi -} -\gdef\anchor#1{\@bsphack \setref{#1}{Ynothing}\@esphack} -} +\newcount\savesfregister +\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} +\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} +\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} % \setref{NAME}{SNT} defines a cross-reference point NAME, namely % NAME-title, NAME-pg, and NAME-SNT. Called from \foonoderef. We have @@ -5071,7 +5192,7 @@ width0pt\relax} \fi % \def\setref#1#2{{% \indexdummies - \ifpdf \pdfmkdest{#1}\fi + \pdfmkdest{#1}% \dosetq{#1-title}{Ytitle}% \dosetq{#1-pg}{Ypagenumber}% \dosetq{#1-snt}{#2}% @@ -5086,6 +5207,7 @@ width0pt\relax} \fi \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} \def\ref#1{\xrefX[#1,,,,,,,]} \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup + \unsepspaces \def\printedmanual{\ignorespaces #5}% \def\printednodename{\ignorespaces #3}% \setbox1=\hbox{\printedmanual}% @@ -5123,13 +5245,13 @@ width0pt\relax} \fi \leavevmode \getfilename{#4}% \ifnum\filenamelength>0 - \pdfannotlink attr{/Border [0 0 0]}% + \startlink attr{/Border [0 0 0]}% goto file{\the\filename.pdf} name{#1@}% \else - \pdfannotlink attr{/Border [0 0 0]}% + \startlink attr{/Border [0 0 0]}% goto name{#1@}% \fi - \BlueGreen + \linkcolor \fi % \ifdim \wd1 > 0pt @@ -5151,7 +5273,7 @@ width0pt\relax} \fi % page 3 \turnoffactive \putwordpage\tie\refx{#1-pg}{}% \fi - \ifpdf \Black\pdfendlink \fi + \endlink \endgroup} % \dosetq is the interface for calls from other macros @@ -5388,6 +5510,8 @@ width0pt\relax} \fi \xspaceskip\z@skip \parindent\defaultparindent % + \smallfonts \rm + % % Hang the footnote text off the number. \hang \textindent{\thisfootno}% @@ -5402,7 +5526,7 @@ width0pt\relax} \fi \else\let\next\f@t\fi \next} \def\f@@t{\bgroup\aftergroup\@foot\let\next} \def\f@t#1{#1\@foot} -\def\@foot{\strut\egroup} +\def\@foot{\strut\par\egroup} }%end \catcode `\@=11 @@ -5497,7 +5621,9 @@ width0pt\relax} \fi % #2 is (optional) width, #3 is (optional) height. % #4 is just the usual extra ignored arg for parsing this stuff. \def\imagexxx#1,#2,#3,#4\finish{% - \ifx\pdfoutput\undefined + \ifpdf + \centerline{\dopdfimage{#1}{#2}{#3}}% + \else % \epsfbox itself resets \epsf?size at each figure. \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi @@ -5518,8 +5644,6 @@ width0pt\relax} \fi \epsfbox{#1.eps}% \fi \endgroup - \else - \centerline{\pdfimage #1.pdf}% \fi } @@ -5863,6 +5987,6 @@ should work if nowhere else does.} @c eval: (add-hook 'write-file-hooks 'time-stamp) @c page-delimiter: "^\\\\message" @c time-stamp-start: "def\\\\texinfoversion{" -@c time-stamp-format: "%:y-%02m-%02d.%H" +@c time-stamp-format: "%:y-%02m-%02d.%02H" @c time-stamp-end: "}" @c End: |