diff options
Diffstat (limited to 'manual')
| -rw-r--r-- | manual/texinfo.tex | 328 |
1 files changed, 174 insertions, 154 deletions
diff --git a/manual/texinfo.tex b/manual/texinfo.tex index 592f7142e7..99113dd71b 100644 --- a/manual/texinfo.tex +++ b/manual/texinfo.tex @@ -3,10 +3,10 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2002-01-04.07} +\def\texinfoversion{2002-03-01.06} % % Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, -% 2000, 01 Free Software Foundation, Inc. +% 2000, 01, 02 Free Software Foundation, Inc. % % This texinfo.tex file is free software; you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -54,12 +54,12 @@ % tex foo.texi % tex foo.texi % dvips foo.dvi -o # or whatever, to process the dvi file; this makes foo.ps. -% The extra runs of TeX get the cross-reference information correct. +% The extra TeX runs get the cross-reference information correct. % Sometimes one run after texindex suffices, and sometimes you need more % than two; texi2dvi does it as many times as necessary. % % It is possible to adapt texinfo.tex for other languages. You can get -% the existing language-specific files from ftp://ftp.gnu.org/gnu/texinfo/. +% the existing language-specific files from the full Texinfo distribution. \message{Loading texinfo [version \texinfoversion]:} @@ -836,18 +836,32 @@ where each line of input produces a line of output.} % \def\asis#1{#1} -% @math means output in math mode. -% We don't use $'s directly in the definition of \math because control -% sequences like \math are expanded when the toc file is written. Then, -% we read the toc file back, the $'s will be normal characters (as they -% should be, according to the definition of Texinfo). So we must use a -% control sequence to switch into and out of math mode. +% @math outputs its argument in math mode. +% We don't use $'s directly in the definition of \math because we need +% to set catcodes according to plain TeX first, to allow for subscripts, +% superscripts, special math chars, etc. +% +% @math does not do math typesetting in section titles, index +% entries, and other such contexts where the catcodes are set before +% @math gets a chance to work. This could perhaps be fixed, but for now +% at least we can have real math in the main text, where it's needed most. +% +% +\let\implicitmath = $%$ font-lock fix % -% This isn't quite enough for @math to work properly in indices, but it -% seems unlikely it will ever be needed there. +% One complication: _ usually means subscripts, but it could also mean +% an actual _ character, as in @math{@var{some_variable} + 1}. So make +% _ within @math be active (mathcode "8000), and distinguish by seeing +% if the current family is \slfam, which is what @var uses. +% +{\catcode95 = \active % 95 = _ +\gdef\mathunderscore{% + \catcode95=\active + \def_{\ifnum\fam=\slfam\_\else\sb\fi}% +}} % -\let\implicitmath = $ -\def\math#1{\implicitmath #1\implicitmath} +\def\math{\tex\mathcode`\_="8000\mathunderscore \implicitmath\finishmath} +\def\finishmath#1{#1\implicitmath\Etex} % @bullet and @minus need the same treatment as @math, just above. \def\bullet{\implicitmath\ptexbullet\implicitmath} @@ -960,7 +974,7 @@ where each line of input produces a line of output.} \expandafter\xdef\csname#1\endcsname{\the\tempnum}} \def\pdfmakeoutlines{{% \openin 1 \jobname.toc - \ifeof 1\else\bgroup + \ifeof 1\else\begingroup \closein 1 \indexnofonts \def\tt{} @@ -970,6 +984,7 @@ where each line of input produces a line of output.} \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace % \def\chapentry ##1##2##3{} + \let\appendixentry = \chapentry \def\unnumbchapentry ##1##2{} \def\secentry ##1##2##3##4{\advancenumber{chap##2}} \def\unnumbsecentry ##1##2{} @@ -980,6 +995,7 @@ where each line of input produces a line of output.} \input \jobname.toc \def\chapentry ##1##2##3{% \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}} + \let\appendixentry = \chapentry \def\unnumbchapentry ##1##2{% \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} \def\secentry ##1##2##3##4{% @@ -995,7 +1011,7 @@ where each line of input produces a line of output.} \def\unnumbsubsubsecentry ##1##2{% \pdfoutline goto name{\pdfmkpgn{##2}}{##1}} \input \jobname.toc - \egroup\fi + \endgroup\fi }} \def\makelinks #1,{% \def\params{#1}\def\E{END}% @@ -1112,9 +1128,6 @@ where each line of input produces a line of output.} }% } -% Use Computer Modern fonts at \magstephalf (11pt). -\newcount\mainmagstep \mainmagstep=\magstephalf - % Set the font macro #1 to the font named #2, adding on the % specified font prefix (normally `cm'). % #3 is the font's design size, #4 is a scale factor @@ -1143,13 +1156,16 @@ where each line of input produces a line of output.} \def\scshape{csc} \def\scbshape{csc} +\newcount\mainmagstep \ifx\bigger\relax -\let\mainmagstep=\magstep1 -\setfont\textrm\rmshape{12}{1000} -\setfont\texttt\ttshape{12}{1000} + % not really supported. + \let\mainmagstep=\magstep1 + \setfont\textrm\rmshape{12}{1000} + \setfont\texttt\ttshape{12}{1000} \else -\setfont\textrm\rmshape{10}{\mainmagstep} -\setfont\texttt\ttshape{10}{\mainmagstep} + \mainmagstep=\magstephalf + \setfont\textrm\rmshape{10}{\mainmagstep} + \setfont\texttt\ttshape{10}{\mainmagstep} \fi % Instead of cmb10, you many want to use cmbx10. % cmbx10 is a prettier font on its own, but cmb10 @@ -1229,20 +1245,6 @@ where each line of input produces a line of output.} \font\seci=cmmi12 scaled \magstep1 \font\secsy=cmsy10 scaled \magstep2 -% \setfont\ssecrm\bxshape{10}{\magstep1} % This size an font looked bad. -% \setfont\ssecit\itshape{10}{\magstep1} % The letters were too crowded. -% \setfont\ssecsl\slshape{10}{\magstep1} -% \setfont\ssectt\ttshape{10}{\magstep1} -% \setfont\ssecsf\sfshape{10}{\magstep1} - -%\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx. -%\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than -%\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1. -%\setfont\ssectt\ttshape{10}{1315} -%\setfont\ssecsf\sfshape{10}{1315} - -%\let\ssecbf=\ssecrm - % Subsection fonts (13.15pt). \setfont\ssecrm\rmbshape{12}{\magstephalf} \setfont\ssecit\itbshape{10}{1315} @@ -1259,17 +1261,16 @@ where each line of input produces a line of output.} % In order for the font changes to affect most math symbols and letters, % we have to define the \textfont of the standard families. Since -% texinfo doesn't allow for producing subscripts and superscripts, we -% don't bother to reset \scriptfont and \scriptscriptfont (which would -% also require loading a lot more fonts). +% texinfo doesn't allow for producing subscripts and superscripts except +% in the main text, we don't bother to reset \scriptfont and +% \scriptscriptfont (which would also require loading a lot more fonts). % \def\resetmathfonts{% - \textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy - \textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf - \textfont\ttfam = \tentt \textfont\sffam = \tensf + \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy + \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf + \textfont\ttfam=\tentt \textfont\sffam=\tensf } - % The font-changing commands redefine the meanings of \tenSTYLE, instead % of just \STYLE. We do this so that font changes will continue to work % in math mode, where it is the current \fam that is relevant in most @@ -2758,9 +2759,23 @@ width0pt\relax} \fi \def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer} \def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} +% Take care of texinfo commands likely to appear in an index entry. +% (Must be a way to avoid doing expansion at all, and thus not have to +% laboriously list every single command here.) +% \def\indexdummies{% \def\ { }% +\def\@{@}% change to @@ when we switch to @ as escape char in aux files. +% Need these in case \tex is in effect and \{ is a \delimiter again. +% But can't use \lbracecmd and \rbracecmd because texindex assumes +% braces and backslashes are used only as delimiters. +\let\{ = \mylbrace +\let\} = \myrbrace +\def\_{{\realbackslash _}}% +\normalturnoffactive +% % Take care of the plain tex accent commands. +\def\,##1{\realbackslash ,{##1}}% \def\"{\realbackslash "}% \def\`{\realbackslash `}% \def\'{\realbackslash '}% @@ -2773,69 +2788,66 @@ width0pt\relax} \fi \def\u{\realbackslash u}% \def\v{\realbackslash v}% \def\H{\realbackslash H}% +\def\dotless##1{\realbackslash dotless {##1}}% % Take care of the plain tex special European modified letters. -\def\oe{\realbackslash oe}% -\def\ae{\realbackslash ae}% -\def\aa{\realbackslash aa}% -\def\OE{\realbackslash OE}% -\def\AE{\realbackslash AE}% \def\AA{\realbackslash AA}% -\def\o{\realbackslash o}% +\def\AE{\realbackslash AE}% +\def\L{\realbackslash L}% +\def\OE{\realbackslash OE}% \def\O{\realbackslash O}% +\def\aa{\realbackslash aa}% +\def\ae{\realbackslash ae}% \def\l{\realbackslash l}% -\def\L{\realbackslash L}% +\def\oe{\realbackslash oe}% +\def\o{\realbackslash o}% \def\ss{\realbackslash ss}% -% Take care of texinfo commands likely to appear in an index entry. -% (Must be a way to avoid doing expansion at all, and thus not have to -% laboriously list every single command here.) -\def\@{@}% will be @@ when we switch to @ as escape char. -% Need these in case \tex is in effect and \{ is a \delimiter again. -% But can't use \lbracecmd and \rbracecmd because texindex assumes -% braces and backslashes are used only as delimiters. -\let\{ = \mylbrace -\let\} = \myrbrace -\def\_{{\realbackslash _}}% -\def\w{\realbackslash w }% +% +% Although these internals commands shouldn't show up, sometimes they do. \def\bf{\realbackslash bf }% +\def\gtr{\realbackslash gtr}% +\def\hat{\realbackslash hat}% +\def\less{\realbackslash less}% %\def\rm{\realbackslash rm }% -\def\sl{\realbackslash sl }% \def\sf{\realbackslash sf}% +\def\sl{\realbackslash sl }% +\def\tclose##1{\realbackslash tclose {##1}}% \def\tt{\realbackslash tt}% -\def\gtr{\realbackslash gtr}% -\def\less{\realbackslash less}% -\def\hat{\realbackslash hat}% +% +\def\b##1{\realbackslash b {##1}}% +\def\i##1{\realbackslash i {##1}}% +\def\sc##1{\realbackslash sc {##1}}% +\def\t##1{\realbackslash t {##1}}% +\def\r##1{\realbackslash r {##1}}% +% \def\TeX{\realbackslash TeX}% -\def\dots{\realbackslash dots }% -\def\result{\realbackslash result}% -\def\equiv{\realbackslash equiv}% -\def\expansion{\realbackslash expansion}% -\def\print{\realbackslash print}% -\def\error{\realbackslash error}% -\def\point{\realbackslash point}% -\def\copyright{\realbackslash copyright}% -\def\tclose##1{\realbackslash tclose {##1}}% +\def\acronym##1{\realbackslash acronym {##1}}% +\def\cite##1{\realbackslash cite {##1}}% \def\code##1{\realbackslash code {##1}}% -\def\uref##1{\realbackslash uref {##1}}% -\def\url##1{\realbackslash url {##1}}% -\def\env##1{\realbackslash env {##1}}% \def\command##1{\realbackslash command {##1}}% +\def\dfn##1{\realbackslash dfn {##1}}% +\def\dots{\realbackslash dots }% +\def\emph##1{\realbackslash emph {##1}}% +\def\env##1{\realbackslash env {##1}}% +\def\file##1{\realbackslash file {##1}}% +\def\kbd##1{\realbackslash kbd {##1}}% +\def\key##1{\realbackslash key {##1}}% +\def\math##1{\realbackslash math {##1}}% \def\option##1{\realbackslash option {##1}}% -\def\dotless##1{\realbackslash dotless {##1}}% \def\samp##1{\realbackslash samp {##1}}% -\def\,##1{\realbackslash ,{##1}}% -\def\t##1{\realbackslash t {##1}}% -\def\r##1{\realbackslash r {##1}}% -\def\i##1{\realbackslash i {##1}}% -\def\b##1{\realbackslash b {##1}}% -\def\sc##1{\realbackslash sc {##1}}% -\def\cite##1{\realbackslash cite {##1}}% -\def\key##1{\realbackslash key {##1}}% -\def\file##1{\realbackslash file {##1}}% +\def\strong##1{\realbackslash strong {##1}}% +\def\uref##1{\realbackslash uref {##1}}% +\def\url##1{\realbackslash url {##1}}% \def\var##1{\realbackslash var {##1}}% -\def\kbd##1{\realbackslash kbd {##1}}% -\def\dfn##1{\realbackslash dfn {##1}}% -\def\emph##1{\realbackslash emph {##1}}% -\def\acronym##1{\realbackslash acronym {##1}}% +\def\w{\realbackslash w }% +% +% These math commands don't seem likely to be used in index entries. +\def\copyright{\realbackslash copyright}% +\def\equiv{\realbackslash equiv}% +\def\error{\realbackslash error}% +\def\expansion{\realbackslash expansion}% +\def\point{\realbackslash point}% +\def\print{\realbackslash print}% +\def\result{\realbackslash result}% % % Handle some cases of @value -- where the variable name does not % contain - or _, and the value does not contain any @@ -2860,7 +2872,10 @@ width0pt\relax} \fi \def\indexdummydots{...} \def\indexnofonts{% -% Just ignore accents. +\def\@{@}% +% how to handle braces? +\def\_{\normalunderscore}% +% \let\,=\indexdummyfont \let\"=\indexdummyfont \let\`=\indexdummyfont @@ -2876,45 +2891,49 @@ width0pt\relax} \fi \let\H=\indexdummyfont \let\dotless=\indexdummyfont % Take care of the plain tex special European modified letters. -\def\oe{oe}% -\def\ae{ae}% -\def\aa{aa}% -\def\OE{OE}% -\def\AE{AE}% \def\AA{AA}% -\def\o{o}% +\def\AE{AE}% +\def\L{L}% +\def\OE{OE}% \def\O{O}% +\def\aa{aa}% +\def\ae{ae}% \def\l{l}% -\def\L{L}% +\def\oe{oe}% +\def\o{o}% \def\ss{ss}% -\let\w=\indexdummyfont -\let\t=\indexdummyfont -\let\r=\indexdummyfont -\let\i=\indexdummyfont +% +% Don't no-op \tt, since it isn't a user-level command +% and is used in the definitions of the active chars like <, >, |, etc. +% Likewise with the other plain tex font commands. +%\let\tt=\indexdummyfont +% \let\b=\indexdummyfont -\let\emph=\indexdummyfont -\let\strong=\indexdummyfont -\let\cite=\indexdummyfont +\let\i=\indexdummyfont +\let\r=\indexdummyfont \let\sc=\indexdummyfont -%Don't no-op \tt, since it isn't a user-level command -% and is used in the definitions of the active chars like <, >, |... -%\let\tt=\indexdummyfont -\let\tclose=\indexdummyfont -\let\code=\indexdummyfont -\let\url=\indexdummyfont -\let\uref=\indexdummyfont -\let\env=\indexdummyfont +\let\t=\indexdummyfont +% +\let\TeX=\indexdummytex \let\acronym=\indexdummyfont +\let\cite=\indexdummyfont +\let\code=\indexdummyfont \let\command=\indexdummyfont -\let\option=\indexdummyfont +\let\dfn=\indexdummyfont +\let\dots=\indexdummydots +\let\emph=\indexdummyfont +\let\env=\indexdummyfont \let\file=\indexdummyfont -\let\samp=\indexdummyfont \let\kbd=\indexdummyfont \let\key=\indexdummyfont +\let\math=\indexdummyfont +\let\option=\indexdummyfont +\let\samp=\indexdummyfont +\let\strong=\indexdummyfont +\let\uref=\indexdummyfont +\let\url=\indexdummyfont \let\var=\indexdummyfont -\let\TeX=\indexdummytex -\let\dots=\indexdummydots -\def\@{@}% +\let\w=\indexdummyfont } % To define \realbackslash, we must make \ not be an escape. @@ -3516,8 +3535,8 @@ width0pt\relax} \fi \gdef\thischaptername{#1}% \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}% \toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}% - {\putwordAppendix{} \appendixletter}}}% +\edef\temp{\noexpand\writetocentry{\realbackslash appendixentry{\the\toks0}% + {\appendixletter}}}% \temp \appendixnoderef \global\let\section = \appendixsec @@ -3950,6 +3969,7 @@ width0pt\relax} \fi \startcontents{\putwordShortTOC}% % \let\chapentry = \shortchapentry + \let\appendixentry = \shortappendixentry \let\unnumbchapentry = \shortunnumberedentry % We want a true roman here for the page numbers. \secfonts @@ -3985,16 +4005,23 @@ width0pt\relax} \fi % The last argument is the page number. % The arguments in between are the chapter number, section number, ... -% Chapter-level things, for both the long and short contents. +% Chapters, in the main contents. \def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}} - -% See comments in \dochapentry re vbox and related settings +% +% Chapters, in the short toc. +% See comments in \dochapentry re vbox and related settings. \def\shortchapentry#1#2#3{% \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}% } +% Appendices, in the main contents. +\def\appendixentry#1#2#3{\dochapentry{\putwordAppendix{} #2\labelspace#1}{#3}} +% +% Appendices, in the short toc. +\let\shortappendixentry = \shortchapentry + % Typeset the label for a chapter or appendix for the short contents. -% The arg is, e.g. `Appendix A' for an appendix, or `3' for a chapter. +% The arg is, e.g., `Appendix A' for an appendix, or `3' for a chapter. % We could simplify the code here by writing out an \appendixentry % command in the toc file for appendices, instead of using \chapentry % for both, but it doesn't seem worth it. @@ -4002,23 +4029,16 @@ width0pt\relax} \fi \newdimen\shortappendixwidth % \def\shortchaplabel#1{% - % Compute width of word "Appendix", may change with language. - \setbox0 = \hbox{\shortcontrm \putwordAppendix}% - \shortappendixwidth = \wd0 - % - % We typeset #1 in a box of constant width, regardless of the text of - % #1, so the chapter titles will come out aligned. - \setbox0 = \hbox{#1}% - \dimen0 = \ifdim\wd0 > \shortappendixwidth \shortappendixwidth \else 0pt \fi - % - % This space should be plenty, since a single number is .5em, and the + % This space should be enough, since a single number is .5em, and the % widest letter (M) is 1em, at least in the Computer Modern fonts. + % But use \hss just in case. % (This space doesn't include the extra space that gets added after % the label; that gets put in by \shortchapentry above.) - \advance\dimen0 by 1.1em - \hbox to \dimen0{#1\hfil}% + \dimen0 = 1em + \hbox to \dimen0{#1\hss}% } +% Unnumbered chapters. \def\unnumbchapentry#1#2{\dochapentry{#1}{#2}} \def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno\bgroup#2\egroup}} @@ -4074,7 +4094,7 @@ width0pt\relax} \fi \def\tocentry#1#2{\begingroup \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks % Do not use \turnoffactive in these arguments. Since the toc is - % typeset in cmr, so characters such as _ would come out wrong; we + % typeset in cmr, characters such as _ would come out wrong; we % have to do the usual translation tricks. \entry{#1}{#2}% \endgroup} @@ -4903,7 +4923,7 @@ width0pt\relax} \fi % #1 is the data type, #2 the name, #3 the args. \def\deftypefunheaderx #1#2 #3\relax{% \doind {fn}{\code{#2}}% Make entry in function index -\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypefun}% +\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypefun}% \deftypefunargs {#3}\endgroup % \catcode 61=\other % Turn off change made in \defparsebody } @@ -4912,9 +4932,9 @@ width0pt\relax} \fi \def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader} -% \defheaderxcond#1\relax$$$ +% \defheaderxcond#1\relax$.$ % puts #1 in @code, followed by a space, but does nothing if #1 is null. -\def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi} +\def\defheaderxcond#1#2$.${\ifx#1\relax\else\code{#1#2} \fi} % #1 is the classification. #2 is the data type. #3 is the name and args. \def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax} @@ -4924,7 +4944,7 @@ width0pt\relax} \fi \begingroup \normalparens % notably, turn off `&' magic, which prevents % at least some C++ text from working -\defname {\defheaderxcond#2\relax$$$#3}{#1}% +\defname {\defheaderxcond#2\relax$.$#3}{#1}% \deftypefunargs {#4}\endgroup % \catcode 61=\other % Turn off change made in \defparsebody } @@ -4970,7 +4990,7 @@ width0pt\relax} \fi \def\deftypeopheader#1#2#3#4{% \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index \begingroup - \defname{\defheaderxcond#2\relax$$$#3} + \defname{\defheaderxcond#2\relax$.$#3} {\deftypeopcategory\ \putwordon\ \code{#1}}% \deftypefunargs{#4}% \endgroup @@ -4985,7 +5005,7 @@ width0pt\relax} \fi \def\deftypemethodheader#1#2#3#4{% \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index \begingroup - \defname{\defheaderxcond#2\relax$$$#3}{\putwordMethodon\ \code{#1}}% + \defname{\defheaderxcond#2\relax$.$#3}{\putwordMethodon\ \code{#1}}% \deftypefunargs{#4}% \endgroup } @@ -4999,7 +5019,7 @@ width0pt\relax} \fi \def\deftypeivarheader#1#2#3{% \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index \begingroup - \defname{\defheaderxcond#2\relax$$$#3} + \defname{\defheaderxcond#2\relax$.$#3} {\putwordInstanceVariableof\ \code{#1}}% \defvarargs{#3}% \endgroup @@ -5082,7 +5102,7 @@ width0pt\relax} \fi % is actually part of the data type, which should not be put into the index. \def\deftypevarheader #1#2{% \dovarind#2 \relax% Make entry in variables index -\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypevar}% +\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypevar}% \interlinepenalty=10000 \endgraf\nobreak\vskip -\parskip\nobreak \endgroup} @@ -5093,7 +5113,7 @@ width0pt\relax} \fi \def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader} \def\deftypevrheader #1#2#3{\dovarind#3 \relax% -\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1} +\begingroup\defname {\defheaderxcond#2\relax$.$#3}{#1} \interlinepenalty=10000 \endgraf\nobreak\vskip -\parskip\nobreak \endgroup} @@ -5904,7 +5924,7 @@ width0pt\relax} \fi % #5 is (ignored optional) extension. % #6 is just the usual extra ignored arg for parsing this stuff. \newif\ifimagevmode -\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup \loggingall +\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup \catcode`\^^M = 5 % in case we're inside an example \normalturnoffactive % allow _ et al. in names % If the image is by itself, center it. @@ -6153,7 +6173,7 @@ should work if nowhere else does.} \def\normalless{<} \def\normalgreater{>} \def\normalplus{+} -\def\normaldollar{$} +\def\normaldollar{$}%$ font-lock fix % This macro is used to make a character print one way in ttfont % where it can probably just be output, and another way in other fonts, @@ -6202,7 +6222,7 @@ should work if nowhere else does.} \catcode`\+=\active \def+{{\tt \char 43}} \catcode`\$=\active -\def${\ifusingit{{\sl\$}}\normaldollar} +\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix %\catcode 27=\active %\def^^[{$\diamondsuit$} @@ -6247,7 +6267,7 @@ should work if nowhere else does.} @let<=@normalless @let>=@normalgreater @let+=@normalplus -@let$=@normaldollar} +@let$=@normaldollar}%$ font-lock fix @def@normalturnoffactive{@let"=@normaldoublequote @let\=@normalbackslash @@ -6258,7 +6278,7 @@ should work if nowhere else does.} @let<=@normalless @let>=@normalgreater @let+=@normalplus -@let$=@normaldollar} +@let$=@normaldollar}%$ font-lock fix % Make _ and + \other characters, temporarily. % This is canceled by @fixbackslash. |