diff options
Diffstat (limited to 'manual/texinfo.tex')
| -rw-r--r-- | manual/texinfo.tex | 5649 |
1 files changed, 2668 insertions, 2981 deletions
diff --git a/manual/texinfo.tex b/manual/texinfo.tex index c93912a055..e9293f3b9d 100644 --- a/manual/texinfo.tex +++ b/manual/texinfo.tex @@ -3,11 +3,10 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2004-11-25.16} +\def\texinfoversion{2003-05-04.08} % % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, -% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software -% Foundation, Inc. +% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. % % This texinfo.tex file is free software; you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -24,16 +23,21 @@ % to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, % Boston, MA 02111-1307, USA. % -% As a special exception, when this file is read by TeX when processing -% a Texinfo source document, you may use the result without -% restriction. (This has been our intent since Texinfo was invented.) +% In other words, you are welcome to use, share and improve this program. +% You are forbidden to forbid anyone else to use, share and improve +% what you give them. Help stamp out software-hoarding! % % Please try the latest version of texinfo.tex before submitting bug % reports; you can get the latest version from: -% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or +% ftp://ftp.gnu.org/gnu/texinfo/texinfo.tex +% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html) % ftp://tug.org/tex/texinfo.tex -% (and all CTAN mirrors, see http://www.ctan.org). -% The texinfo.tex in any given distribution could well be out +% (and all CTAN mirrors, see http://www.ctan.org), +% and /home/gd/gnu/doc/texinfo.tex on the GNU machines. +% +% The GNU Texinfo home page is http://www.gnu.org/software/texinfo. +% +% The texinfo.tex in any given Texinfo distribution could well be out % of date, so if that's what you're using, please check. % % Send bug reports to bug-texinfo@gnu.org. Please include including a @@ -55,9 +59,6 @@ % It is possible to adapt texinfo.tex for other languages, to some % extent. You can get the existing language-specific files from the % full Texinfo distribution. -% -% The GNU Texinfo home page is http://www.gnu.org/software/texinfo. - \message{Loading texinfo [version \texinfoversion]:} @@ -84,16 +85,12 @@ \let\ptexend=\end \let\ptexequiv=\equiv \let\ptexexclam=\! -\let\ptexfootnote=\footnote \let\ptexgtr=> \let\ptexhat=^ \let\ptexi=\i \let\ptexindent=\indent -\let\ptexinsert=\insert \let\ptexlbrace=\{ \let\ptexless=< -\let\ptexnewwrite\newwrite -\let\ptexnoindent=\noindent \let\ptexplus=+ \let\ptexrbrace=\} \let\ptexslash=\/ @@ -104,15 +101,6 @@ % starts a new line in the output. \newlinechar = `^^J -% Use TeX 3.0's \inputlineno to get the line number, for better error -% messages, but if we're using an old version of TeX, don't do anything. -% -\ifx\inputlineno\thisisundefined - \let\linenumber = \empty % Pre-3.0. -\else - \def\linenumber{l.\the\inputlineno:\space} -\fi - % Set up fixed words for English if not already set. \ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi \ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi @@ -151,81 +139,43 @@ \ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi \ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi \ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi +\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi \ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi +\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi % In some macros, we cannot use the `\? notation---the left quote is % in some cases the escape char. \chardef\colonChar = `\: \chardef\commaChar = `\, \chardef\dotChar = `\. +\chardef\equalChar = `\= \chardef\exclamChar= `\! \chardef\questChar = `\? \chardef\semiChar = `\; -\chardef\underChar = `\_ - \chardef\spaceChar = `\ % -\chardef\spacecat = 10 -\def\spaceisspace{\catcode\spaceChar=\spacecat} +\chardef\underChar = `\_ % Ignore a token. % \def\gobble#1{} -% The following is used inside several \edef's. -\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname} +% True if #1 is the empty string, i.e., called like `\ifempty{}'. +% +\def\ifempty#1{\ifemptyx #1\emptymarkA\emptymarkB}% +\def\ifemptyx#1#2\emptymarkB{\ifx #1\emptymarkA}% % Hyphenation fixes. -\hyphenation{ - Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script - ap-pen-dix bit-map bit-maps - data-base data-bases eshell fall-ing half-way long-est man-u-script - man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm - par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces - spell-ing spell-ings - stand-alone strong-est time-stamp time-stamps which-ever white-space - wide-spread wrap-around -} +\hyphenation{ap-pen-dix} +\hyphenation{eshell} +\hyphenation{mini-buf-fer mini-buf-fers} +\hyphenation{time-stamp} +\hyphenation{white-space} % Margin to add to right of even pages, to left of odd pages. \newdimen\bindingoffset \newdimen\normaloffset \newdimen\pagewidth \newdimen\pageheight -% For a final copy, take out the rectangles -% that mark overfull boxes (in case you have decided -% that the text looks ok even though it passes the margin). -% -\def\finalout{\overfullrule=0pt} - -% @| inserts a changebar to the left of the current line. It should -% surround any changed text. This approach does *not* work if the -% change spans more than two lines of output. To handle that, we would -% have adopt a much more difficult approach (putting marks into the main -% vertical list for the beginning and end of each change). -% -\def\|{% - % \vadjust can only be used in horizontal mode. - \leavevmode - % - % Append this vertical mode material after the current line in the output. - \vadjust{% - % We want to insert a rule with the height and depth of the current - % leading; that is exactly what \strutbox is supposed to record. - \vskip-\baselineskip - % - % \vadjust-items are inserted at the left edge of the type. So - % the \llap here moves out into the left-hand margin. - \llap{% - % - % For a thicker or thinner bar, change the `1pt'. - \vrule height\baselineskip width1pt - % - % This is the space between the bar and the text. - \hskip 12pt - }% - }% -} - % Sometimes it is convenient to have everything in the transcript file % and nothing on the terminal. We don't just call \tracingall here, % since that produces some useless output on the terminal. We also make @@ -250,7 +200,7 @@ \tracingassigns1 \fi \tracingcommands3 % 3 gives us more in etex - \errorcontextlines16 + \errorcontextlines\maxdimen }% % add check for \lastpenalty to plain's definitions. If the last thing @@ -308,7 +258,7 @@ % the page break happens to be in the middle of an example. \shipout\vbox{% % Do this early so pdf references go to the beginning of the page. - \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi + \ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi % \ifcropmarks \vbox to \outervsize\bgroup \hsize = \outerhsize @@ -389,162 +339,132 @@ % the input line (except we remove a trailing comment). #1 should be a % macro which expects an ordinary undelimited TeX argument. % -\def\parsearg{\parseargusing{}} -\def\parseargusing#1#2{% - \def\next{#2}% +\def\parsearg#1{% + \let\next = #1% \begingroup \obeylines - \spaceisspace - #1% - \parseargline\empty% Insert the \empty token, see \finishparsearg below. + \futurelet\temp\parseargx +} + +% If the next token is an obeyed space (from an @example environment or +% the like), remove it and recurse. Otherwise, we're done. +\def\parseargx{% + % \obeyedspace is defined far below, after the definition of \sepspaces. + \ifx\obeyedspace\temp + \expandafter\parseargdiscardspace + \else + \expandafter\parseargline + \fi } +% Remove a single space (as the delimiter token to the macro call). +{\obeyspaces % + \gdef\parseargdiscardspace {\futurelet\temp\parseargx}} + {\obeylines % \gdef\parseargline#1^^M{% \endgroup % End of the group started in \parsearg. - \argremovecomment #1\comment\ArgTerm% + % + % First remove any @c comment, then any @comment. + % Result of each macro is put in \toks0. + \argremovec #1\c\relax % + \expandafter\argremovecomment \the\toks0 \comment\relax % + % + % Call the caller's macro, saved as \next in \parsearg. + \expandafter\next\expandafter{\the\toks0}% }% } -% First remove any @comment, then any @c comment. -\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} -\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} +% Since all \c{,omment} does is throw away the argument, we can let TeX +% do that for us. The \relax here is matched by the \relax in the call +% in \parseargline; it could be more or less anything, its purpose is +% just to delimit the argument to the \c. +\def\argremovec#1\c#2\relax{\toks0 = {#1}} +\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}} -% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space. -% -% \argremovec might leave us with trailing space, e.g., +% \argremovec{,omment} might leave us with trailing spaces, though; e.g., % @end itemize @c foo -% This space token undergoes the same procedure and is eventually removed -% by \finishparsearg. -% -\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M} -\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M} -\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{% - \def\temp{#3}% - \ifx\temp\empty - % We cannot use \next here, as it holds the macro to run; - % thus we reuse \temp. - \let\temp\finishparsearg - \else - \let\temp\argcheckspaces - \fi - % Put the space token in: - \temp#1 #3\ArgTerm +% will have two active spaces as part of the argument with the +% `itemize'. Here we remove all active spaces from #1, and assign the +% result to \toks0. +% +% This loses if there are any *other* active characters besides spaces +% in the argument -- _ ^ +, for example -- since they get expanded. +% Fortunately, Texinfo does not define any such commands. (If it ever +% does, the catcode of the characters in questionwill have to be changed +% here.) But this means we cannot call \removeactivespaces as part of +% \argremovec{,omment}, since @c uses \parsearg, and thus the argument +% that \parsearg gets might well have any character at all in it. +% +\def\removeactivespaces#1{% + \begingroup + \ignoreactivespaces + \edef\temp{#1}% + \global\toks0 = \expandafter{\temp}% + \endgroup } -% If a _delimited_ argument is enclosed in braces, they get stripped; so -% to get _exactly_ the rest of the line, we had to prevent such situation. -% We prepended an \empty token at the very beginning and we expand it now, -% just before passing the control to \next. -% (Similarily, we have to think about #3 of \argcheckspacesY above: it is -% either the null string, or it ends with \^^M---thus there is no danger -% that a pair of braces would be stripped. +% Change the active space to expand to nothing. % -% But first, we have to remove the trailing space token. -% -\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}} - -% \parseargdef\foo{...} -% is roughly equivalent to -% \def\foo{\parsearg\Xfoo} -% \def\Xfoo#1{...} -% -% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my -% favourite TeX trick. --kasal, 16nov03 - -\def\parseargdef#1{% - \expandafter \doparseargdef \csname\string#1\endcsname #1% -} -\def\doparseargdef#1#2{% - \def#2{\parsearg#1}% - \def#1##1% -} - -% Several utility definitions with active space: -{ +\begingroup \obeyspaces - \gdef\obeyedspace{ } - - % Make each space character in the input produce a normal interword - % space in the output. Don't allow a line break at this space, as this - % is used only in environments like @example, where each line of input - % should produce a line of output anyway. - % - \gdef\sepspaces{\obeyspaces\let =\tie} - - % If an index command is used in an @example environment, any spaces - % therein should become regular spaces in the raw index file, not the - % expansion of \tie (\leavevmode \penalty \@M \ ). - \gdef\unsepspaces{\let =\space} -} + \gdef\ignoreactivespaces{\obeyspaces\let =\empty} +\endgroup \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} -% Define the framework for environments in texinfo.tex. It's used like this: -% -% \envdef\foo{...} -% \def\Efoo{...} -% -% It's the responsibility of \envdef to insert \begingroup before the -% actual body; @end closes the group after calling \Efoo. \envdef also -% defines \thisenv, so the current environment is known; @end checks -% whether the environment name matches. The \checkenv macro can also be -% used to check whether the current environment is the one expected. -% -% Non-false conditionals (@iftex, @ifset) don't fit into this, so they -% are not treated as enviroments; they don't open a group. (The -% implementation of @end takes care not to call \endgroup in this -% special case.) +%% These are used to keep @begin/@end levels from running away +%% Call \inENV within environments (after a \begingroup) +\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi} +\def\ENVcheck{% +\ifENV\errmessage{Still within an environment; press RETURN to continue} +\endgroup\fi} % This is not perfect, but it should reduce lossage +% @begin foo is the same as @foo, for now. +\newhelp\EMsimple{Press RETURN to continue.} -% At runtime, environments start with this: -\def\startenvironment#1{\begingroup\def\thisenv{#1}} -% initialize -\let\thisenv\empty +\outer\def\begin{\parsearg\beginxxx} -% ... but they get defined via ``\envdef\foo{...}'': -\long\def\envdef#1#2{\def#1{\startenvironment#1#2}} -\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}} +\def\beginxxx #1{% +\expandafter\ifx\csname #1\endcsname\relax +{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else +\csname #1\endcsname\fi} -% Check whether we're in the right environment: -\def\checkenv#1{% - \def\temp{#1}% - \ifx\thisenv\temp +% @end foo executes the definition of \Efoo. +% +\def\end{\parsearg\endxxx} +\def\endxxx #1{% + \removeactivespaces{#1}% + \edef\endthing{\the\toks0}% + % + \expandafter\ifx\csname E\endthing\endcsname\relax + \expandafter\ifx\csname \endthing\endcsname\relax + % There's no \foo, i.e., no ``environment'' foo. + \errhelp = \EMsimple + \errmessage{Undefined command `@end \endthing'}% + \else + \unmatchedenderror\endthing + \fi \else - \badenverr + % Everything's ok; the right environment has been started. + \csname E\endthing\endcsname \fi } -% Evironment mismatch, #1 expected: -\def\badenverr{% +% There is an environment #1, but it hasn't been started. Give an error. +% +\def\unmatchedenderror#1{% \errhelp = \EMsimple - \errmessage{This command can appear only \inenvironment\temp, - not \inenvironment\thisenv}% -} -\def\inenvironment#1{% - \ifx#1\empty - out of any environment% - \else - in environment \expandafter\string#1% - \fi + \errmessage{This `@end #1' doesn't have a matching `@#1'}% } -% @end foo executes the definition of \Efoo. -% But first, it executes a specialized version of \checkenv +% Define the control sequence \E#1 to give an unmatched @end error. % -\parseargdef\end{% - \if 1\csname iscond.#1\endcsname - \else - % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03 - \expandafter\checkenv\csname#1\endcsname - \csname E#1\endcsname - \endgroup - \fi +\def\defineunmatchedend#1{% + \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}% } -\newhelp\EMsimple{Press RETURN to continue.} - %% Simple single-character @ commands @@ -576,9 +496,6 @@ !gdef!rbraceatcmd[@}]% !endgroup -% @comma{} to avoid , parsing problems. -\let\comma = , - % Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent % Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. \let\, = \c @@ -588,12 +505,10 @@ \let\ubaraccent = \b \let\udotaccent = \d -% Other special characters: @questiondown @exclamdown @ordf @ordm +% Other special characters: @questiondown @exclamdown % Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. \def\questiondown{?`} \def\exclamdown{!`} -\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} -\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} % Dotless i and dotless j, used for accents. \def\imacro{i} @@ -606,25 +521,6 @@ \fi\fi } -% The \TeX{} logo, as in plain, but resetting the spacing so that a -% period following counts as ending a sentence. (Idea found in latex.) -% -\edef\TeX{\TeX \spacefactor=1000 } - -% @LaTeX{} logo. Not quite the same results as the definition in -% latex.ltx, since we use a different font for the raised A; it's most -% convenient for us to use an explicitly smaller font, rather than using -% the \scriptstyle font (since we don't reset \scriptstyle and -% \scriptscriptstyle). -% -\def\LaTeX{% - L\kern-.36em - {\setbox0=\hbox{T}% - \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}% - \kern-.15em - \TeX -} - % Be sure we're in horizontal mode when doing a tie, since we make space % equivalent to this in @example-like environments. Otherwise, a space % at the beginning of a line will start with \penalty -- and @@ -678,14 +574,59 @@ \newbox\groupbox \def\vfilllimit{0.7} % -\envdef\group{% - \ifnum\catcode`\^^M=\active \else +\def\group{\begingroup + \ifnum\catcode13=\active \else \errhelp = \groupinvalidhelp \errmessage{@group invalid in context where filling is enabled}% \fi - \startsavinginserts + % + % The \vtop we start below produces a box with normal height and large + % depth; thus, TeX puts \baselineskip glue before it, and (when the + % next line of text is done) \lineskip glue after it. (See p.82 of + % the TeXbook.) Thus, space below is not quite equal to space + % above. But it's pretty close. + \def\Egroup{% + \egroup % End the \vtop. + % \dimen0 is the vertical size of the group's box. + \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox + % \dimen2 is how much space is left on the page (more or less). + \dimen2 = \pageheight \advance\dimen2 by -\pagetotal + % if the group doesn't fit on the current page, and it's a big big + % group, force a page break. + \ifdim \dimen0 > \dimen2 + \ifdim \pagetotal < \vfilllimit\pageheight + \page + \fi + \fi + \copy\groupbox + \endgroup % End the \group. + }% % \setbox\groupbox = \vtop\bgroup + % We have to put a strut on the last line in case the @group is in + % the midst of an example, rather than completely enclosing it. + % Otherwise, the interline space between the last line of the group + % and the first line afterwards is too small. But we can't put the + % strut in \Egroup, since there it would be on a line by itself. + % Hence this just inserts a strut at the beginning of each line. + \everypar = {\strut}% + % + % Since we have a strut on every line, we don't need any of TeX's + % normal interline spacing. + \offinterlineskip + % + % OK, but now we have to do something about blank + % lines in the input in @example-like environments, which normally + % just turn into \lisppar, which will insert no space now that we've + % turned off the interline space. Simplest is to make them be an + % empty paragraph. + \ifx\par\lisppar + \edef\par{\leavevmode \par}% + % + % Reset ^^M's definition to new definition of \par. + \obeylines + \fi + % % Do @comment since we are called inside an environment such as % @example, where each end-of-line in the input causes an % end-of-line in the output. We don't want the end-of-line after @@ -695,32 +636,6 @@ \comment } % -% The \vtop produces a box with normal height and large depth; thus, TeX puts -% \baselineskip glue before it, and (when the next line of text is done) -% \lineskip glue after it. Thus, space below is not quite equal to space -% above. But it's pretty close. -\def\Egroup{% - % To get correct interline space between the last line of the group - % and the first line afterwards, we have to propagate \prevdepth. - \endgraf % Not \par, as it may have been set to \lisppar. - \global\dimen1 = \prevdepth - \egroup % End the \vtop. - % \dimen0 is the vertical size of the group's box. - \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox - % \dimen2 is how much space is left on the page (more or less). - \dimen2 = \pageheight \advance\dimen2 by -\pagetotal - % if the group doesn't fit on the current page, and it's a big big - % group, force a page break. - \ifdim \dimen0 > \dimen2 - \ifdim \pagetotal < \vfilllimit\pageheight - \page - \fi - \fi - \box\groupbox - \prevdepth = \dimen1 - \checkinserts -} -% % TeX puts in an \escapechar (i.e., `@') at the beginning of the help % message, so this ends up printing `@group can only ...'. % @@ -733,8 +648,10 @@ where each line of input produces a line of output.} \newdimen\mil \mil=0.001in +\def\need{\parsearg\needx} + % Old definition--didn't work. -%\parseargdef\need{\par % +%\def\needx #1{\par % %% This method tries to make TeX break the page naturally %% if the depth of the box does not fit. %{\baselineskip=0pt% @@ -742,7 +659,7 @@ where each line of input produces a line of output.} %\prevdepth=-1000pt %}} -\parseargdef\need{% +\def\needx#1{% % Ensure vertical mode, so we don't make a big box in the middle of a % paragraph. \par @@ -781,10 +698,35 @@ where each line of input produces a line of output.} \fi } -% @br forces paragraph break (and is undocumented). +% @br forces paragraph break \let\br = \par +% @dots{} output an ellipsis using the current font. +% We do .5em per period so that it has the same spacing in a typewriter +% font as three actual period characters. +% +\def\dots{% + \leavevmode + \hbox to 1.5em{% + \hskip 0pt plus 0.25fil minus 0.25fil + .\hss.\hss.% + \hskip 0pt plus 0.5fil minus 0.5fil + }% +} + +% @enddots{} is an end-of-sentence ellipsis. +% +\def\enddots{% + \leavevmode + \hbox to 2em{% + \hskip 0pt plus 0.25fil minus 0.25fil + .\hss.\hss.\hss.% + \hskip 0pt plus 0.5fil minus 0.5fil + }% + \spacefactor=3000 +} + % @page forces the start of a new page. % \def\page{\par\vfill\supereject} @@ -797,11 +739,13 @@ where each line of input produces a line of output.} \newskip\exdentamount % This defn is used inside fill environments such as @defun. -\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break} +\def\exdent{\parsearg\exdentyyy} +\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}} % This defn is used inside nofill environments such as @example. -\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount - \leftline{\hskip\leftskip{\rm#1}}}} +\def\nofillexdent{\parsearg\nofillexdentyyy} +\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount +\leftline{\hskip\leftskip{\rm#1}}}} % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current % paragraph. For more general purposes, use the \margin insertion @@ -853,19 +797,8 @@ where each line of input produces a line of output.} } % @include file insert text of that file as input. -% -\def\include{\parseargusing\filenamecatcodes\includezzz} -\def\includezzz#1{% - \pushthisfilestack - \def\thisfile{#1}% - {% - \makevalueexpandable - \def\temp{\input #1 }% - \expandafter - }\temp - \popthisfilestack -} -\def\filenamecatcodes{% +% Allow normal characters that we make active in the argument (a file name). +\def\include{\begingroup \catcode`\\=\other \catcode`~=\other \catcode`^=\other @@ -874,50 +807,33 @@ where each line of input produces a line of output.} \catcode`<=\other \catcode`>=\other \catcode`+=\other - \catcode`-=\other -} - -\def\pushthisfilestack{% - \expandafter\pushthisfilestackX\popthisfilestack\StackTerm -} -\def\pushthisfilestackX{% - \expandafter\pushthisfilestackY\thisfile\StackTerm -} -\def\pushthisfilestackY #1\StackTerm #2\StackTerm {% - \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}% -} - -\def\popthisfilestack{\errthisfilestackempty} -\def\errthisfilestackempty{\errmessage{Internal error: - the stack of filenames is empty.}} + \parsearg\includezzz} +% Restore active chars for included file. +\def\includezzz#1{\endgroup\begingroup + % Read the included file in a group so nested @include's work. + \def\thisfile{#1}% + \let\value=\expandablevalue + \input\thisfile +\endgroup} \def\thisfile{} % @center line % outputs that line, centered. % -\parseargdef\center{% - \ifhmode - \let\next\centerH - \else - \let\next\centerV - \fi - \next{\hfil \ignorespaces#1\unskip \hfil}% -} -\def\centerH#1{% - {% - \hfil\break - \advance\hsize by -\leftskip - \advance\hsize by -\rightskip - \line{#1}% - \break - }% -} -\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}} +\def\center{\parsearg\docenter} +\def\docenter#1{{% + \ifhmode \hfil\break \fi + \advance\hsize by -\leftskip + \advance\hsize by -\rightskip + \line{\hfil \ignorespaces#1\unskip \hfil}% + \ifhmode \break \fi +}} % @sp n outputs n lines of vertical space -\parseargdef\sp{\vskip #1\baselineskip} +\def\sp{\parsearg\spxxx} +\def\spxxx #1{\vskip #1\baselineskip} % @comment ...line which is ignored... % @c is the same as @comment @@ -938,7 +854,8 @@ where each line of input produces a line of output.} \def\asisword{asis} % no translation, these are keywords \def\noneword{none} % -\parseargdef\paragraphindent{% +\def\paragraphindent{\parsearg\doparagraphindent} +\def\doparagraphindent#1{% \def\temp{#1}% \ifx\temp\asisword \else @@ -955,7 +872,8 @@ where each line of input produces a line of output.} % We'll use ems for NCHARS like @paragraphindent. % It seems @exampleindent asis isn't necessary, but % I preserve it to make it similar to @paragraphindent. -\parseargdef\exampleindent{% +\def\exampleindent{\parsearg\doexampleindent} +\def\doexampleindent#1{% \def\temp{#1}% \ifx\temp\asisword \else @@ -969,18 +887,21 @@ where each line of input produces a line of output.} % @firstparagraphindent WORD % If WORD is `none', then suppress indentation of the first paragraph -% after a section heading. If WORD is `insert', then do indent at such +% after a section heading. If WORD is `insert', then do indentat such % paragraphs. % % The paragraph indentation is suppressed or not by calling -% \suppressfirstparagraphindent, which the sectioning commands do. -% We switch the definition of this back and forth according to WORD. -% By default, we suppress indentation. +% \suppressfirstparagraphindent, which the sectioning commands do. We +% switch the definition of this back and forth according to WORD. By +% default, we suppress indentation. % \def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent} +\newdimen\currentparindent +% \def\insertword{insert} % -\parseargdef\firstparagraphindent{% +\def\firstparagraphindent{\parsearg\dofirstparagraphindent} +\def\dofirstparagraphindent#1{% \def\temp{#1}% \ifx\temp\noneword \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent @@ -1000,24 +921,15 @@ where each line of input produces a line of output.} % \gdef\dosuppressfirstparagraphindent{% \gdef\indent{% - \restorefirstparagraphindent - \indent - }% - \gdef\noindent{% - \restorefirstparagraphindent - \noindent + \global\let\indent=\ptexindent + \global\everypar = {}% }% \global\everypar = {% - \kern -\parindent - \restorefirstparagraphindent + \kern-\parindent + \global\let\indent=\ptexindent + \global\everypar = {}% }% -} - -\gdef\restorefirstparagraphindent{% - \global \let \indent = \ptexindent - \global \let \noindent = \ptexnoindent - \global \everypar = {}% -} +}% % @asis just yields its argument. Used with @table, for example. @@ -1025,18 +937,23 @@ where each line of input produces a line of output.} \def\asis#1{#1} % @math outputs its argument in math mode. +% We don't use $'s directly in the definition of \math because we need +% to set catcodes according to plain TeX first, to allow for subscripts, +% superscripts, special math chars, etc. +% +\let\implicitmath = $%$ font-lock fix % % One complication: _ usually means subscripts, but it could also mean % an actual _ character, as in @math{@var{some_variable} + 1}. So make -% _ active, and distinguish by seeing if the current family is \slfam, -% which is what @var uses. -{ - \catcode\underChar = \active - \gdef\mathunderscore{% - \catcode\underChar=\active - \def_{\ifnum\fam=\slfam \_\else\sb\fi}% - } -} +% _ within @math be active (mathcode "8000), and distinguish by seeing +% if the current family is \slfam, which is what @var uses. +% +{\catcode\underChar = \active +\gdef\mathunderscore{% + \catcode\underChar=\active + \def_{\ifnum\fam=\slfam \_\else\sb\fi}% +}} +% % Another complication: we want \\ (and @\) to output a \ character. % FYI, plain.tex uses \\ as a temporary control sequence (why?), but % this is not advertised and we don't care. Texinfo does not @@ -1047,16 +964,15 @@ where each line of input produces a line of output.} % \def\math{% \tex - \mathunderscore + \mathcode`\_="8000 \mathunderscore \let\\ = \mathbackslash \mathactive - $\finishmath -} -\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. + \implicitmath\finishmath} +\def\finishmath#1{#1\implicitmath\Etex} % Some active characters (such as <) are spaced differently in math. -% We have to reset their definitions in case the @math was an argument -% to a command which sets the catcodes (such as @item or @section). +% We have to reset their definitions in case the @math was an +% argument to a command which set the catcodes (such as @item or @section). % { \catcode`^ = \active @@ -1072,33 +988,8 @@ where each line of input produces a line of output.} } % @bullet and @minus need the same treatment as @math, just above. -\def\bullet{$\ptexbullet$} -\def\minus{$-$} - -% @dots{} outputs an ellipsis using the current font. -% We do .5em per period so that it has the same spacing in a typewriter -% font as three actual period characters. -% -\def\dots{% - \leavevmode - \hbox to 1.5em{% - \hskip 0pt plus 0.25fil - .\hfil.\hfil.% - \hskip 0pt plus 0.5fil - }% -} - -% @enddots{} is an end-of-sentence ellipsis. -% -\def\enddots{% - \dots - \spacefactor=3000 -} - -% @comma{} is so commas can be inserted into text without messing up -% Texinfo's parsing. -% -\let\comma = , +\def\bullet{\implicitmath\ptexbullet\implicitmath} +\def\minus{\implicitmath-\implicitmath} % @refill is a no-op. \let\refill=\relax @@ -1114,20 +1005,20 @@ where each line of input produces a line of output.} % So open here the files we need to have open while reading the input. % This makes it possible to make a .fmt file for texinfo. \def\setfilename{% - \fixbackslash % Turn off hack to swallow `\input texinfo'. \iflinks - \tryauxfile - % Open the new aux file. TeX will close it automatically at exit. - \immediate\openout\auxfile=\jobname.aux + \readauxfile \fi % \openindices needs to do some work in any case. \openindices - \let\setfilename=\comment % Ignore extra @setfilename cmds. + \fixbackslash % Turn off hack to swallow `\input texinfo'. + \global\let\setfilename=\comment % Ignore extra @setfilename cmds. % % If texinfo.cnf is present on the system, read it. % Useful for site-wide @afourpaper, etc. + % Just to be on the safe side, close the input stream before the \input. \openin 1 texinfo.cnf - \ifeof 1 \else \input texinfo.cnf \fi - \closein 1 + \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi + \closein1 + \temp % \comment % Ignore the actual filename. } @@ -1163,23 +1054,17 @@ where each line of input produces a line of output.} \newif\ifpdf \newif\ifpdfmakepagedest -% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1 -% can be set). So we test for \relax and 0 as well as \undefined, -% borrowed from ifpdf.sty. \ifx\pdfoutput\undefined + \pdffalse + \let\pdfmkdest = \gobble + \let\pdfurl = \gobble + \let\endlink = \relax + \let\linkcolor = \relax + \let\pdfmakeoutlines = \relax \else - \ifx\pdfoutput\relax - \else - \ifcase\pdfoutput - \else - \pdftrue - \fi - \fi -\fi -% -\ifpdf + \pdftrue + \pdfoutput = 1 \input pdfcolor - \pdfcatalog{/PageMode /UseOutlines}% \def\dopdfimage#1#2#3{% \def\imagewidth{#2}% \def\imageheight{#3}% @@ -1200,13 +1085,7 @@ where each line of input produces a line of output.} \ifnum\pdftexversion < 14 \else \pdfrefximage \pdflastximage \fi} - \def\pdfmkdest#1{{% - % We have to set dummies so commands such as @code in a section title - % aren't expanded. - \atdummies - \normalturnoffactive - \pdfdest name{#1} xyz% - }} + \def\pdfmkdest#1{{\normalturnoffactive \pdfdest name{#1} xyz}} \def\pdfmkpgn#1{#1} \let\linkcolor = \Blue % was Cyan, but that seems light? \def\endlink{\Black\pdfendlink} @@ -1215,94 +1094,48 @@ where each line of input produces a line of output.} \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% \else \csname#1\endcsname \fi} \def\advancenumber#1{\tempnum=\expnumber{#1}\relax - \advance\tempnum by 1 + \advance\tempnum by1 \expandafter\xdef\csname#1\endcsname{\the\tempnum}} - % - % #1 is the section text. #2 is the pdf expression for the number - % of subentries (or empty, for subsubsections). #3 is the node - % text, which might be empty if this toc entry had no - % corresponding node. #4 is the page number. - % - \def\dopdfoutline#1#2#3#4{% - % Generate a link to the node text if that exists; else, use the - % page number. We could generate a destination for the section - % text in the case where a section has no node, but it doesn't - % seem worthwhile, since most documents are normally structured. - \def\pdfoutlinedest{#3}% - \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi - % - \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}% - } - % - \def\pdfmakeoutlines{% - \begingroup + \def\pdfmakeoutlines{{% + \openin 1 \jobname.toc + \ifeof 1\else\begingroup + \closein 1 % Thanh's hack / proper braces in bookmarks \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace % - % Read toc silently, to get counts of subentries for \pdfoutline. - \def\numchapentry##1##2##3##4{% - \def\thischapnum{##2}% - \def\thissecnum{0}% - \def\thissubsecnum{0}% - }% - \def\numsecentry##1##2##3##4{% - \advancenumber{chap\thischapnum}% - \def\thissecnum{##2}% - \def\thissubsecnum{0}% - }% - \def\numsubsecentry##1##2##3##4{% - \advancenumber{sec\thissecnum}% - \def\thissubsecnum{##2}% - }% - \def\numsubsubsecentry##1##2##3##4{% - \advancenumber{subsec\thissubsecnum}% - }% - \def\thischapnum{0}% - \def\thissecnum{0}% - \def\thissubsecnum{0}% - % - % use \def rather than \let here because we redefine \chapentry et - % al. a second time, below. - \def\appentry{\numchapentry}% - \def\appsecentry{\numsecentry}% - \def\appsubsecentry{\numsubsecentry}% - \def\appsubsubsecentry{\numsubsubsecentry}% - \def\unnchapentry{\numchapentry}% - \def\unnsecentry{\numsecentry}% - \def\unnsubsecentry{\numsubsecentry}% - \def\unnsubsubsecentry{\numsubsubsecentry}% + \def\chapentry ##1##2##3{} + \def\secentry ##1##2##3##4{\advancenumber{chap##2}} + \def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}} + \def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}} + \let\appendixentry = \chapentry + \let\unnumbchapentry = \chapentry + \let\unnumbsecentry = \secentry + \let\unnumbsubsecentry = \subsecentry + \let\unnumbsubsubsecentry = \subsubsecentry \input \jobname.toc + \def\chapentry ##1##2##3{% + \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}} + \def\secentry ##1##2##3##4{% + \pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}} + \def\subsecentry ##1##2##3##4##5{% + \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}} + \def\subsubsecentry ##1##2##3##4##5##6{% + \pdfoutline goto name{\pdfmkpgn{##6}}{##1}} + \let\appendixentry = \chapentry + \let\unnumbchapentry = \chapentry + \let\unnumbsecentry = \secentry + \let\unnumbsubsecentry = \subsecentry + \let\unnumbsubsubsecentry = \subsubsecentry % - % Read toc second time, this time actually producing the outlines. - % The `-' means take the \expnumber as the absolute number of - % subentries, which we calculated on our first read of the .toc above. - % - % We use the node names as the destinations. - \def\numchapentry##1##2##3##4{% - \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}% - \def\numsecentry##1##2##3##4{% - \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}% - \def\numsubsecentry##1##2##3##4{% - \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}% - \def\numsubsubsecentry##1##2##3##4{% count is always zero - \dopdfoutline{##1}{}{##3}{##4}}% + % Make special characters normal for writing to the pdf file. % - % PDF outlines are displayed using system fonts, instead of - % document fonts. Therefore we cannot use special characters, - % since the encoding is unknown. For example, the eogonek from - % Latin 2 (0xea) gets translated to a | character. Info from - % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100. - % - % xx to do this right, we have to translate 8-bit characters to - % their "best" equivalent, based on the @documentencoding. Right - % now, I guess we'll just let the pdf reader have its way. \indexnofonts + \let\tt=\relax \turnoffactive \input \jobname.toc - \endgroup - } - % + \endgroup\fi + }} \def\makelinks #1,{% \def\params{#1}\def\E{END}% \ifx\params\E @@ -1333,6 +1166,7 @@ where each line of input produces a line of output.} \def\ppn#1{\pgn=#1\gobble} \def\ppnn{\pgn=\first} \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,} + \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} \def\skipspaces#1{\def\PP{#1}\def\D{|}% \ifx\PP\D\let\nextsp\relax \else\let\nextsp\skipspaces @@ -1350,17 +1184,18 @@ where each line of input produces a line of output.} \def\pdfurl#1{% \begingroup \normalturnoffactive\def\@{@}% - \makevalueexpandable + \let\value=\expandablevalue \leavevmode\Red \startlink attr{/Border [0 0 0]}% user{/Subtype /Link /A << /S /URI /URI (#1) >>}% + % #1 \endgroup} \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}} \def\maketoks{% - \expandafter\poptoks\the\toksA|ENDTOKS|\relax + \expandafter\poptoks\the\toksA|ENDTOKS| \ifx\first0\adn0 \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3 \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6 @@ -1380,44 +1215,20 @@ where each line of input produces a line of output.} \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}} \linkcolor #1\endlink} \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} -\else - \let\pdfmkdest = \gobble - \let\pdfurl = \gobble - \let\endlink = \relax - \let\linkcolor = \relax - \let\pdfmakeoutlines = \relax -\fi % \ifx\pdfoutput +\fi % \ifx\pdfoutput \message{fonts,} - -% Change the current font style to #1, remembering it in \curfontstyle. -% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in -% italics, not bold italics. -% -\def\setfontstyle#1{% - \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd. - \csname ten#1\endcsname % change the current font -} - -% Select #1 fonts with the current style. -% -\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname} - -\def\rm{\fam=0 \setfontstyle{rm}} -\def\it{\fam=\itfam \setfontstyle{it}} -\def\sl{\fam=\slfam \setfontstyle{sl}} -\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} -\def\tt{\fam=\ttfam \setfontstyle{tt}} +% Font-change commands. % Texinfo sort of supports the sans serif font style, which plain TeX does not. -% So we set up a \sf. +% So we set up a \sf analogous to plain's \rm, etc. \newfam\sffam -\def\sf{\fam=\sffam \setfontstyle{sf}} +\def\sf{\fam=\sffam \tensf} \let\li = \sf % Sometimes we call it \li, not \sf. -% We don't need math for this font style. -\def\ttsl{\setfontstyle{ttsl}} +% We don't need math for this one. +\def\ttsl{\tenttsl} % Default leading. \newdimen\textleading \textleading = 13.2pt @@ -1468,11 +1279,21 @@ where each line of input produces a line of output.} \def\scshape{csc} \def\scbshape{csc} -% Text fonts (11.2pt, magstep1). -\def\textnominalsize{11pt} -\edef\mainmagstep{\magstephalf} -\setfont\textrm\rmshape{10}{\mainmagstep} -\setfont\texttt\ttshape{10}{\mainmagstep} +\newcount\mainmagstep +\ifx\bigger\relax + % not really supported. + \mainmagstep=\magstep1 + \setfont\textrm\rmshape{12}{1000} + \setfont\texttt\ttshape{12}{1000} +\else + \mainmagstep=\magstephalf + \setfont\textrm\rmshape{10}{\mainmagstep} + \setfont\texttt\ttshape{10}{\mainmagstep} +\fi +% Instead of cmb10, you may want to use cmbx10. +% cmbx10 is a prettier font on its own, but cmb10 +% looks better when embedded in a line with cmr10 +% (in Bob's opinion). \setfont\textbf\bfshape{10}{\mainmagstep} \setfont\textit\itshape{10}{\mainmagstep} \setfont\textsl\slshape{10}{\mainmagstep} @@ -1482,14 +1303,12 @@ where each line of input produces a line of output.} \font\texti=cmmi10 scaled \mainmagstep \font\textsy=cmsy10 scaled \mainmagstep -% A few fonts for @defun names and args. -\setfont\defbf\bfshape{10}{\magstep1} +% A few fonts for @defun, etc. +\setfont\defbf\bxshape{10}{\magstep1} %was 1314 \setfont\deftt\ttshape{10}{\magstep1} -\setfont\defttsl\ttslshape{10}{\magstep1} -\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf} % Fonts for indices, footnotes, small examples (9pt). -\def\smallnominalsize{9pt} \setfont\smallrm\rmshape{9}{1000} \setfont\smalltt\ttshape{9}{1000} \setfont\smallbf\bfshape{10}{900} @@ -1502,7 +1321,6 @@ where each line of input produces a line of output.} \font\smallsy=cmsy9 % Fonts for small examples (8pt). -\def\smallernominalsize{8pt} \setfont\smallerrm\rmshape{8}{1000} \setfont\smallertt\ttshape{8}{1000} \setfont\smallerbf\bfshape{10}{800} @@ -1514,8 +1332,7 @@ where each line of input produces a line of output.} \font\smalleri=cmmi8 \font\smallersy=cmsy8 -% Fonts for title page (20.4pt): -\def\titlenominalsize{20pt} +% Fonts for title page: \setfont\titlerm\rmbshape{12}{\magstep3} \setfont\titleit\itbshape{10}{\magstep4} \setfont\titlesl\slbshape{10}{\magstep4} @@ -1530,7 +1347,6 @@ where each line of input produces a line of output.} \def\authortt{\sectt} % Chapter (and unnumbered) fonts (17.28pt). -\def\chapnominalsize{17pt} \setfont\chaprm\rmbshape{12}{\magstep2} \setfont\chapit\itbshape{10}{\magstep3} \setfont\chapsl\slbshape{10}{\magstep3} @@ -1543,7 +1359,6 @@ where each line of input produces a line of output.} \font\chapsy=cmsy10 scaled \magstep3 % Section fonts (14.4pt). -\def\secnominalsize{14pt} \setfont\secrm\rmbshape{12}{\magstep1} \setfont\secit\itbshape{10}{\magstep2} \setfont\secsl\slbshape{10}{\magstep2} @@ -1556,7 +1371,6 @@ where each line of input produces a line of output.} \font\secsy=cmsy10 scaled \magstep2 % Subsection fonts (13.15pt). -\def\ssecnominalsize{13pt} \setfont\ssecrm\rmbshape{12}{\magstephalf} \setfont\ssecit\itbshape{10}{1315} \setfont\ssecsl\slbshape{10}{1315} @@ -1564,22 +1378,11 @@ where each line of input produces a line of output.} \setfont\ssecttsl\ttslshape{10}{1315} \setfont\ssecsf\sfbshape{12}{\magstephalf} \let\ssecbf\ssecrm -\setfont\ssecsc\scbshape{10}{1315} +\setfont\ssecsc\scbshape{10}{\magstep1} \font\sseci=cmmi12 scaled \magstephalf \font\ssecsy=cmsy10 scaled 1315 - -% Reduced fonts for @acro in text (10pt). -\def\reducednominalsize{10pt} -\setfont\reducedrm\rmshape{10}{1000} -\setfont\reducedtt\ttshape{10}{1000} -\setfont\reducedbf\bfshape{10}{1000} -\setfont\reducedit\itshape{10}{1000} -\setfont\reducedsl\slshape{10}{1000} -\setfont\reducedsf\sfshape{10}{1000} -\setfont\reducedsc\scshape{10}{1000} -\setfont\reducedttsl\ttslshape{10}{1000} -\font\reducedi=cmmi10 -\font\reducedsy=cmsy10 +% The smallcaps and symbol fonts should actually be scaled \magstep1.5, +% but that is not a standard magnification. % In order for the font changes to affect most math symbols and letters, % we have to define the \textfont of the standard families. Since @@ -1594,81 +1397,50 @@ where each line of input produces a line of output.} } % The font-changing commands redefine the meanings of \tenSTYLE, instead -% of just \STYLE. We do this because \STYLE needs to also set the -% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire -% \tenSTYLE to set the current font. -% -% Each font-changing command also sets the names \lsize (one size lower) -% and \lllsize (three sizes lower). These relative commands are used in -% the LaTeX logo and acronyms. -% -% This all needs generalizing, badly. -% +% of just \STYLE. We do this so that font changes will continue to work +% in math mode, where it is the current \fam that is relevant in most +% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam +% \tenbf}, for example. By redefining \tenbf, we obviate the need to +% redefine \bf itself. \def\textfonts{% \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc - \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy - \let\tenttsl=\textttsl - \def\curfontsize{text}% - \def\lsize{reduced}\def\lllsize{smaller}% + \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl \resetmathfonts \setleading{\textleading}} \def\titlefonts{% \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy \let\tenttsl=\titlettsl - \def\curfontsize{title}% - \def\lsize{chap}\def\lllsize{subsec}% \resetmathfonts \setleading{25pt}} \def\titlefont#1{{\titlefonts\rm #1}} \def\chapfonts{% \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc - \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy - \let\tenttsl=\chapttsl - \def\curfontsize{chap}% - \def\lsize{sec}\def\lllsize{text}% + \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl \resetmathfonts \setleading{19pt}} \def\secfonts{% \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc - \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy - \let\tenttsl=\secttsl - \def\curfontsize{sec}% - \def\lsize{subsec}\def\lllsize{reduced}% + \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl \resetmathfonts \setleading{16pt}} \def\subsecfonts{% \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc - \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy - \let\tenttsl=\ssecttsl - \def\curfontsize{ssec}% - \def\lsize{text}\def\lllsize{small}% + \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl \resetmathfonts \setleading{15pt}} -\let\subsubsecfonts = \subsecfonts -\def\reducedfonts{% - \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl - \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc - \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy - \let\tenttsl=\reducedttsl - \def\curfontsize{reduced}% - \def\lsize{small}\def\lllsize{smaller}% - \resetmathfonts \setleading{10.5pt}} +\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf? \def\smallfonts{% \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy \let\tenttsl=\smallttsl - \def\curfontsize{small}% - \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{10.5pt}} \def\smallerfonts{% \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy \let\tenttsl=\smallerttsl - \def\curfontsize{smaller}% - \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{9.5pt}} % Set the fonts to use with the @small... environments. @@ -1677,7 +1449,7 @@ where each line of input produces a line of output.} % About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample % can fit this many characters: % 8.5x11=86 smallbook=72 a4=90 a5=69 -% If we use \scriptfonts (8pt), then we can fit this many characters: +% If we use \smallerfonts (8pt), then we can fit this many characters: % 8.5x11=90+ smallbook=80 a4=90+ a5=77 % For me, subjectively, the few extra characters that fit aren't worth % the additional smallness of 8pt. So I'm making the default 9pt. @@ -1685,13 +1457,14 @@ where each line of input produces a line of output.} % By the way, for comparison, here's what fits with @example (10pt): % 8.5x11=71 smallbook=60 a4=75 a5=58 % -% I wish the USA used A4 paper. +% I wish we used A4 paper on this side of the Atlantic. +% % --karl, 24jan03. % Set up the default fonts, so we can use them for creating boxes. % -\textfonts \rm +\textfonts % Define these so they can be easily changed for other fonts. \def\angleleft{$\langle$} @@ -1702,7 +1475,7 @@ where each line of input produces a line of output.} % Fonts for short table of contents. \setfont\shortcontrm\rmshape{12}{1000} -\setfont\shortcontbf\bfshape{10}{\magstep1} % no cmb12 +\setfont\shortcontbf\bxshape{12}{1000} \setfont\shortcontsl\slshape{12}{1000} \setfont\shortconttt\ttshape{12}{1000} @@ -1716,27 +1489,15 @@ where each line of input produces a line of output.} \def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx} \def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx} -% like \smartslanted except unconditionally uses \ttsl. -% @var is set to this for defun arguments. -\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx} - -% like \smartslanted except unconditionally use \sl. We never want -% ttsl for book titles, do we? -\def\cite#1{{\sl #1}\futurelet\next\smartitalicx} - \let\i=\smartitalic -\let\slanted=\smartslanted \let\var=\smartslanted \let\dfn=\smartslanted \let\emph=\smartitalic +\let\cite=\smartslanted -% @b, explicit bold. \def\b#1{{\bf #1}} \let\strong=\b -% @sansserif, explicit sans. -\def\sansserif#1{{\sf #1}} - % We can't just use \exhyphenpenalty, because that only has effect at % the end of a paragraph. Restore normal hyphenation at the end of the % group within which \nohyphenation is presumably called. @@ -1759,6 +1520,7 @@ where each line of input produces a line of output.} {\tt \rawbackslash \frenchspacing #1}% \null } +\let\ttfont=\t \def\samp#1{`\tclose{#1}'\null} \setfont\keyrm\rmshape{8}{1000} \font\keysy=cmsy9 @@ -1799,7 +1561,7 @@ where each line of input produces a line of output.} \null } -% We *must* turn on hyphenation at `-' and `_' in @code. +% We *must* turn on hyphenation at `-' and `_' in \code. % Otherwise, it is too hard to avoid overfull hboxes % in the Emacs manual, the Library manual, etc. @@ -1817,6 +1579,10 @@ where each line of input produces a line of output.} \catcode`\_=\active \let_\codeunder \codex } + % + % If we end up with any active - characters when handling the index, + % just treat them as a normal -. + \global\def\indexbreaks{\catcode`\-=\active \let-\realdash} } \def\realdash{-} @@ -1840,7 +1606,8 @@ where each line of input produces a line of output.} % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), % `example' (@kbd uses ttsl only inside of @example and friends), % or `code' (@kbd uses normal tty font always). -\parseargdef\kbdinputstyle{% +\def\kbdinputstyle{\parsearg\kbdinputstylexxx} +\def\kbdinputstylexxx#1{% \def\arg{#1}% \ifx\arg\worddistinct \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% @@ -1866,8 +1633,8 @@ where each line of input produces a line of output.} \else{\tclose{\kbdfont\look}}\fi \else{\tclose{\kbdfont\look}}\fi} -% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. -\let\indicateurl=\code +% For @url, @env, @command quotes seem unnecessary, so use \code. +\let\url=\code \let\env=\code \let\command=\code @@ -1899,10 +1666,6 @@ where each line of input produces a line of output.} \endlink \endgroup} -% @url synonym for @uref, since that's how everyone uses it. -% -\let\url=\uref - % rms does not like angle brackets --karl, 17may97. % So now @email is just like @uref, unless we are pdf. % @@ -1944,101 +1707,22 @@ where each line of input produces a line of output.} \def\sc#1{{\smallcaps#1}} % smallcaps font \def\ii#1{{\it #1}} % italic font -% @acronym for "FBI", "NATO", and the like. -% We print this one point size smaller, since it's intended for -% all-uppercase. -% -\def\acronym#1{\doacronym #1,,\finish} -\def\doacronym#1,#2,#3\finish{% - {\selectfonts\lsize #1}% - \def\temp{#2}% - \ifx\temp\empty \else - \space ({\unsepspaces \ignorespaces \temp \unskip})% - \fi -} - -% @abbr for "Comput. J." and the like. -% No font change, but don't do end-of-sentence spacing. -% -\def\abbr#1{\doabbr #1,,\finish} -\def\doabbr#1,#2,#3\finish{% - {\frenchspacing #1}% - \def\temp{#2}% - \ifx\temp\empty \else - \space ({\unsepspaces \ignorespaces \temp \unskip})% - \fi -} +% @acronym downcases the argument and prints in smallcaps. +\def\acronym#1{{\smallcaps \lowercase{#1}}} -% @pounds{} is a sterling sign, which Knuth put in the CM italic font. -% +% @pounds{} is a sterling sign. \def\pounds{{\it\$}} -% @euro{} comes from a separate font, depending on the current style. -% We use the free feym* fonts from the eurosym package by Henrik -% Theiling, which support regular, slanted, bold and bold slanted (and -% "outlined" (blackboard board, sort of) versions, which we don't need). -% It is available from http://www.ctan.org/tex-archive/fonts/eurosym. -% -% Although only regular is the truly official Euro symbol, we ignore -% that. The Euro is designed to be slightly taller than the regular -% font height. -% -% feymr - regular -% feymo - slanted -% feybr - bold -% feybo - bold slanted -% -% There is no good (free) typewriter version, to my knowledge. -% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide. -% Hmm. -% -% Also doesn't work in math. Do we need to do math with euro symbols? -% Hope not. -% -% -\def\euro{{\eurofont e}} -\def\eurofont{% - % We set the font at each command, rather than predefining it in - % \textfonts and the other font-switching commands, so that - % installations which never need the symbold don't have to have the - % font installed. - % - % There is only one designed size (nominal 10pt), so we always scale - % that to the current nominal size. - % - % By the way, simply using "at 1em" works for cmr10 and the like, but - % does not work for cmbx10 and other extended/shrunken fonts. - % - \def\eurosize{\csname\curfontsize nominalsize\endcsname}% - % - \ifx\curfontstyle\bfstylename - % bold: - \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize - \else - % regular: - \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize - \fi - \thiseurofont -} - -% @registeredsymbol - R in a circle. The font for the R should really -% be smaller yet, but lllsize is the best we can do for now. +% @registeredsymbol - R in a circle. For now, only works in text size; +% we'd have to redo the font mechanism to change the \scriptstyle and +% \scriptscriptstyle font sizes to make it look right in headings. % Adapted from the plain.tex definition of \copyright. % \def\registeredsymbol{% - $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}% - \hfil\crcr\Orb}}% + $^{{\ooalign{\hfil\raise.07ex\hbox{$\scriptstyle\rm R$}\hfil\crcr\Orb}}% }$% } -% Laurent Siebenmann reports \Orb undefined with: -% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 -% so we'll define it if necessary. -% -\ifx\Orb\undefined -\def\Orb{\mathhexbox20D} -\fi - \message{page headings,} @@ -2057,103 +1741,87 @@ where each line of input produces a line of output.} \newif\ifsetshortcontentsaftertitlepage \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue -\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% +\def\shorttitlepage{\parsearg\shorttitlepagezzz} +\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% \endgroup\page\hbox{}\page} -\envdef\titlepage{% - % Open one extra group, as we want to close it in the middle of \Etitlepage. - \begingroup - \parindent=0pt \textfonts - % Leave some space at the very top of the page. - \vglue\titlepagetopglue - % No rule at page bottom unless we print one at the top with @title. - \finishedtitlepagetrue - % - % Most title ``pages'' are actually two pages long, with space - % at the top of the second. We don't want the ragged left on the second. - \let\oldpage = \page - \def\page{% +\def\titlepage{\begingroup \parindent=0pt \textfonts + \let\subtitlerm=\tenrm + \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}% + % + \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines + \let\tt=\authortt}% + % + % Leave some space at the very top of the page. + \vglue\titlepagetopglue + % + % Now you can print the title using @title. + \def\title{\parsearg\titlezzz}% + \def\titlezzz##1{\leftline{\titlefonts\rm ##1} + % print a rule at the page bottom also. + \finishedtitlepagefalse + \vskip4pt \hrule height 4pt width \hsize \vskip4pt}% + % No rule at page bottom unless we print one at the top with @title. + \finishedtitlepagetrue + % + % Now you can put text using @subtitle. + \def\subtitle{\parsearg\subtitlezzz}% + \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}% + % + % @author should come last, but may come many times. + \def\author{\parsearg\authorzzz}% + \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi + {\authorfont \leftline{##1}}}% + % + % Most title ``pages'' are actually two pages long, with space + % at the top of the second. We don't want the ragged left on the second. + \let\oldpage = \page + \def\page{% \iffinishedtitlepage\else - \finishtitlepage + \finishtitlepage \fi + \oldpage \let\page = \oldpage - \page - \null - }% + \hbox{}}% +% \def\page{\oldpage \hbox{}} } \def\Etitlepage{% - \iffinishedtitlepage\else - \finishtitlepage - \fi - % It is important to do the page break before ending the group, - % because the headline and footline are only empty inside the group. - % If we use the new definition of \page, we always get a blank page - % after the title page, which we certainly don't want. - \oldpage - \endgroup - % - % Need this before the \...aftertitlepage checks so that if they are - % in effect the toc pages will come out with page numbers. - \HEADINGSon - % - % If they want short, they certainly want long too. - \ifsetshortcontentsaftertitlepage - \shortcontents - \contents - \global\let\shortcontents = \relax - \global\let\contents = \relax - \fi - % - \ifsetcontentsaftertitlepage - \contents - \global\let\contents = \relax - \global\let\shortcontents = \relax - \fi + \iffinishedtitlepage\else + \finishtitlepage + \fi + % It is important to do the page break before ending the group, + % because the headline and footline are only empty inside the group. + % If we use the new definition of \page, we always get a blank page + % after the title page, which we certainly don't want. + \oldpage + \endgroup + % + % Need this before the \...aftertitlepage checks so that if they are + % in effect the toc pages will come out with page numbers. + \HEADINGSon + % + % If they want short, they certainly want long too. + \ifsetshortcontentsaftertitlepage + \shortcontents + \contents + \global\let\shortcontents = \relax + \global\let\contents = \relax + \fi + % + \ifsetcontentsaftertitlepage + \contents + \global\let\contents = \relax + \global\let\shortcontents = \relax + \fi } \def\finishtitlepage{% - \vskip4pt \hrule height 2pt width \hsize - \vskip\titlepagebottomglue - \finishedtitlepagetrue -} - -%%% Macros to be used within @titlepage: - -\let\subtitlerm=\tenrm -\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} - -\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines - \let\tt=\authortt} - -\parseargdef\title{% - \checkenv\titlepage - \leftline{\titlefonts\rm #1} - % print a rule at the page bottom also. - \finishedtitlepagefalse - \vskip4pt \hrule height 4pt width \hsize \vskip4pt -} - -\parseargdef\subtitle{% - \checkenv\titlepage - {\subtitlefont \rightline{#1}}% -} - -% @author should come last, but may come many times. -% It can also be used inside @quotation. -% -\parseargdef\author{% - \def\temp{\quotation}% - \ifx\thisenv\temp - \def\quotationauthor{#1}% printed in \Equotation. - \else - \checkenv\titlepage - \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi - {\authorfont \leftline{#1}}% - \fi + \vskip4pt \hrule height 2pt width \hsize + \vskip\titlepagebottomglue + \finishedtitlepagetrue } - %%% Set up page headings and footings. \let\thispage=\folio @@ -2163,7 +1831,7 @@ where each line of input produces a line of output.} \newtoks\evenfootline % footline on even pages \newtoks\oddfootline % footline on odd pages -% Now make TeX use those variables +% Now make Tex use those variables \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline \else \the\evenheadline \fi}} \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline @@ -2177,27 +1845,32 @@ where each line of input produces a line of output.} % @evenfooting @thisfile|| % @oddfooting ||@thisfile - \def\evenheading{\parsearg\evenheadingxxx} -\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish} -\def\evenheadingyyy #1\|#2\|#3\|#4\finish{% +\def\oddheading{\parsearg\oddheadingxxx} +\def\everyheading{\parsearg\everyheadingxxx} + +\def\evenfooting{\parsearg\evenfootingxxx} +\def\oddfooting{\parsearg\oddfootingxxx} +\def\everyfooting{\parsearg\everyfootingxxx} + +{\catcode`\@=0 % + +\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish} +\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{% \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -\def\oddheading{\parsearg\oddheadingxxx} -\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish} -\def\oddheadingyyy #1\|#2\|#3\|#4\finish{% +\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish} +\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{% \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}% +\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}% -\def\evenfooting{\parsearg\evenfootingxxx} -\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish} -\def\evenfootingyyy #1\|#2\|#3\|#4\finish{% +\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish} +\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{% \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -\def\oddfooting{\parsearg\oddfootingxxx} -\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish} -\def\oddfootingyyy #1\|#2\|#3\|#4\finish{% +\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish} +\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{% \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% % % Leave some space for the footline. Hopefully ok to assume @@ -2206,8 +1879,9 @@ where each line of input produces a line of output.} \global\advance\vsize by -\baselineskip } -\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}} - +\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}} +% +}% unbind the catcode of @. % @headings double turns headings on for double-sided printing. % @headings single turns headings on for single-sided printing. @@ -2221,7 +1895,7 @@ where each line of input produces a line of output.} \def\headings #1 {\csname HEADINGS#1\endcsname} -\def\HEADINGSoff{% +\def\HEADINGSoff{ \global\evenheadline={\hfil} \global\evenfootline={\hfil} \global\oddheadline={\hfil} \global\oddfootline={\hfil}} \HEADINGSoff @@ -2230,7 +1904,7 @@ where each line of input produces a line of output.} % chapter name on inside top of right hand pages, document % title on inside top of left hand pages, and page numbers on outside top % edge of all pages. -\def\HEADINGSdouble{% +\def\HEADINGSdouble{ \global\pageno=1 \global\evenfootline={\hfil} \global\oddfootline={\hfil} @@ -2242,7 +1916,7 @@ where each line of input produces a line of output.} % For single-sided printing, chapter title goes across top left of page, % page number on top right. -\def\HEADINGSsingle{% +\def\HEADINGSsingle{ \global\pageno=1 \global\evenfootline={\hfil} \global\oddfootline={\hfil} @@ -2289,11 +1963,12 @@ where each line of input produces a line of output.} % @settitle line... specifies the title of the document, for headings. % It generates no output of its own. \def\thistitle{\putwordNoTitle} -\def\settitle{\parsearg{\gdef\thistitle}} +\def\settitle{\parsearg\settitlezzz} +\def\settitlezzz #1{\gdef\thistitle{#1}} \message{tables,} -% Tables -- @table, @ftable, @vtable, @item(x). +% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x). % default indentation of table text \newdimen\tableindent \tableindent=.8in @@ -2305,7 +1980,7 @@ where each line of input produces a line of output.} % used internally for \itemindent minus \itemmargin \newdimen\itemmax -% Note @table, @ftable, and @vtable define @item, @itemx, etc., with +% Note @table, @vtable, and @vtable define @item, @itemx, etc., with % these defs. % They also define \itemindex % to index the item name in whatever manner is desired (perhaps none). @@ -2317,10 +1992,22 @@ where each line of input produces a line of output.} \def\internalBitem{\smallbreak \parsearg\itemzzz} \def\internalBitemx{\itemxpar \parsearg\itemzzz} +\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz} +\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz} + +\def\internalBkitem{\smallbreak \parsearg\kitemzzz} +\def\internalBkitemx{\itemxpar \parsearg\kitemzzz} + +\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}% + \itemzzz {#1}} + +\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}% + \itemzzz {#1}} + \def\itemzzz #1{\begingroup % \advance\hsize by -\rightskip \advance\hsize by -\tableindent - \setbox0=\hbox{\itemindicate{#1}}% + \setbox0=\hbox{\itemfont{#1}}% \itemindex{#1}% \nobreak % This prevents a break before @itemx. % @@ -2344,13 +2031,17 @@ where each line of input produces a line of output.} % \parskip glue -- logically it's part of the @item we just started. \nobreak \vskip-\parskip % - % Stop a page break at the \parskip glue coming up. However, if - % what follows is an environment such as @example, there will be no - % \parskip glue; then the negative vskip we just inserted would - % cause the example and the item to crash together. So we use this - % bizarre value of 10001 as a signal to \aboveenvbreak to insert - % \parskip glue after all. Section titles are handled this way also. - % + % Stop a page break at the \parskip glue coming up. (Unfortunately + % we can't prevent a possible page break at the following + % \baselineskip glue.) However, if what follows is an environment + % such as @example, there will be no \parskip glue; then + % the negative vskip we just would cause the example and the item to + % crash together. So we use this bizarre value of 10001 as a signal + % to \aboveenvbreak to insert \parskip glue after all. + % (Possibly there are other commands that could be followed by + % @example which need the same treatment, but not section titles; or + % maybe section titles are the only special case and they should be + % penalty 10001...) \penalty 10001 \endgroup \itemxneedsnegativevskipfalse @@ -2370,72 +2061,81 @@ where each line of input produces a line of output.} \fi } -\def\item{\errmessage{@item while not in a list environment}} -\def\itemx{\errmessage{@itemx while not in a list environment}} +\def\item{\errmessage{@item while not in a table}} +\def\itemx{\errmessage{@itemx while not in a table}} +\def\kitem{\errmessage{@kitem while not in a table}} +\def\kitemx{\errmessage{@kitemx while not in a table}} +\def\xitem{\errmessage{@xitem while not in a table}} +\def\xitemx{\errmessage{@xitemx while not in a table}} + +% Contains a kludge to get @end[description] to work. +\def\description{\tablez{\dontindex}{1}{}{}{}{}} % @table, @ftable, @vtable. -\envdef\table{% - \let\itemindex\gobble - \tablecheck{table}% -} -\envdef\ftable{% - \def\itemindex ##1{\doind {fn}{\code{##1}}}% - \tablecheck{ftable}% -} -\envdef\vtable{% - \def\itemindex ##1{\doind {vr}{\code{##1}}}% - \tablecheck{vtable}% +\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex} +{\obeylines\obeyspaces% +\gdef\tablex #1^^M{% +\tabley\dontindex#1 \endtabley}} + +\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex} +{\obeylines\obeyspaces% +\gdef\ftablex #1^^M{% +\tabley\fnitemindex#1 \endtabley +\def\Eftable{\endgraf\afterenvbreak\endgroup}% +\let\Etable=\relax}} + +\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex} +{\obeylines\obeyspaces% +\gdef\vtablex #1^^M{% +\tabley\vritemindex#1 \endtabley +\def\Evtable{\endgraf\afterenvbreak\endgroup}% +\let\Etable=\relax}} + +\def\dontindex #1{} +\def\fnitemindex #1{\doind {fn}{\code{#1}}}% +\def\vritemindex #1{\doind {vr}{\code{#1}}}% + +{\obeyspaces % +\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup% +\tablez{#1}{#2}{#3}{#4}{#5}{#6}}} + +\def\tablez #1#2#3#4#5#6{% +\aboveenvbreak % +\begingroup % +\def\Edescription{\Etable}% Necessary kludge. +\let\itemindex=#1% +\ifnum 0#3>0 \advance \leftskip by #3\mil \fi % +\ifnum 0#4>0 \tableindent=#4\mil \fi % +\ifnum 0#5>0 \advance \rightskip by #5\mil \fi % +\def\itemfont{#2}% +\itemmax=\tableindent % +\advance \itemmax by -\itemmargin % +\advance \leftskip by \tableindent % +\exdentamount=\tableindent +\parindent = 0pt +\parskip = \smallskipamount +\ifdim \parskip=0pt \parskip=2pt \fi% +\def\Etable{\endgraf\afterenvbreak\endgroup}% +\let\item = \internalBitem % +\let\itemx = \internalBitemx % +\let\kitem = \internalBkitem % +\let\kitemx = \internalBkitemx % +\let\xitem = \internalBxitem % +\let\xitemx = \internalBxitemx % } -\def\tablecheck#1{% - \ifnum \the\catcode`\^^M=\active - \endgroup - \errmessage{This command won't work in this context; perhaps the problem is - that we are \inenvironment\thisenv}% - \def\next{\doignore{#1}}% - \else - \let\next\tablex - \fi - \next -} -\def\tablex#1{% - \def\itemindicate{#1}% - \parsearg\tabley -} -\def\tabley#1{% - {% - \makevalueexpandable - \edef\temp{\noexpand\tablez #1\space\space\space}% - \expandafter - }\temp \endtablez -} -\def\tablez #1 #2 #3 #4\endtablez{% - \aboveenvbreak - \ifnum 0#1>0 \advance \leftskip by #1\mil \fi - \ifnum 0#2>0 \tableindent=#2\mil \fi - \ifnum 0#3>0 \advance \rightskip by #3\mil \fi - \itemmax=\tableindent - \advance \itemmax by -\itemmargin - \advance \leftskip by \tableindent - \exdentamount=\tableindent - \parindent = 0pt - \parskip = \smallskipamount - \ifdim \parskip=0pt \parskip=2pt \fi - \let\item = \internalBitem - \let\itemx = \internalBitemx -} -\def\Etable{\endgraf\afterenvbreak} -\let\Eftable\Etable -\let\Evtable\Etable -\let\Eitemize\Etable -\let\Eenumerate\Etable % This is the counter used by @enumerate, which is really @itemize \newcount \itemno -\envdef\itemize{\parsearg\doitemize} +\def\itemize{\parsearg\itemizezzz} + +\def\itemizezzz #1{% + \begingroup % ended by the @end itemize + \itemizey {#1}{\Eitemize} +} -\def\doitemize#1{% +\def\itemizey#1#2{% \aboveenvbreak \itemmax=\itemindent \advance\itemmax by -\itemmargin @@ -2444,33 +2144,13 @@ where each line of input produces a line of output.} \parindent=0pt \parskip=\smallskipamount \ifdim\parskip=0pt \parskip=2pt \fi + \def#2{\endgraf\afterenvbreak\endgroup}% \def\itemcontents{#1}% % @itemize with no arg is equivalent to @itemize @bullet. \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi \let\item=\itemizeitem } -% Definition of @item while inside @itemize and @enumerate. -% -\def\itemizeitem{% - \advance\itemno by 1 % for enumerations - {\let\par=\endgraf \smallbreak}% reasonable place to break - {% - % If the document has an @itemize directly after a section title, a - % \nobreak will be last on the list, and \sectionheading will have - % done a \vskip-\parskip. In that case, we don't want to zero - % parskip, or the item text will crash with the heading. On the - % other hand, when there is normal text preceding the item (as there - % usually is), we do want to zero parskip, or there would be too much - % space. In that case, we won't have a \nobreak before. At least - % that's the theory. - \ifnum\lastpenalty<10000 \parskip=0in \fi - \noindent - \hbox to 0pt{\hss \itemcontents \kern\itemmargin}% - \vadjust{\penalty 1200}}% not good to break after first line of item. - \flushcr -} - % \splitoff TOKENS\endmark defines \first to be the first token in % TOKENS, and \rest to be the remainder. % @@ -2480,8 +2160,11 @@ where each line of input produces a line of output.} % or number, to specify the first label in the enumerated list. No % argument is the same as `1'. % -\envparseargdef\enumerate{\enumeratey #1 \endenumeratey} +\def\enumerate{\parsearg\enumeratezzz} +\def\enumeratezzz #1{\enumeratey #1 \endenumeratey} \def\enumeratey #1 #2\endenumeratey{% + \begingroup % ended by the @end enumerate + % % If we were given no argument, pretend we were given `1'. \def\thearg{#1}% \ifx\thearg\empty \def\thearg{1}\fi @@ -2552,13 +2235,13 @@ where each line of input produces a line of output.} }% } -% Call \doitemize, adding a period to the first argument and supplying the +% Call itemizey, adding a period to the first argument and supplying the % common last two arguments. Also subtract one from the initial value in % \itemno, since @item increments \itemno. % \def\startenumeration#1{% \advance\itemno by -1 - \doitemize{#1.}\flushcr + \itemizey{#1.}\Eenumerate\flushcr } % @alphaenumerate and @capsenumerate are abbreviations for giving an arg @@ -2569,6 +2252,16 @@ where each line of input produces a line of output.} \def\Ealphaenumerate{\Eenumerate} \def\Ecapsenumerate{\Eenumerate} +% Definition of @item while inside @itemize. + +\def\itemizeitem{% +\advance\itemno by 1 +{\let\par=\endgraf \smallbreak}% +\ifhmode \errmessage{In hmode at itemizeitem}\fi +{\parskip=0in \hskip 0pt +\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}% +\vadjust{\penalty 1200}}% +\flushcr} % @multitable macros % Amy Hendrickson, 8/18/94, 3/6/96 @@ -2595,14 +2288,24 @@ where each line of input produces a line of output.} % @multitable {Column 1 template} {Column 2 template} {Column 3 template} % @item ... % using the widest term desired in each column. +% +% For those who want to use more than one line's worth of words in +% the preamble, break the line within one argument and it +% will parse correctly, i.e., +% +% @multitable {Column 1 template} {Column 2 template} {Column 3 +% template} +% Not: +% @multitable {Column 1 template} {Column 2 template} +% {Column 3 template} % Each new table line starts with @item, each subsequent new column % starts with @tab. Empty columns may be produced by supplying @tab's % with nothing between them for as many times as empty columns are needed, % ie, @tab@tab@tab will produce two empty columns. -% @item, @tab do not need to be on their own lines, but it will not hurt -% if they are. +% @item, @tab, @multitable or @end multitable do not need to be on their +% own lines, but it will not hurt if they are. % Sample multitable: @@ -2646,12 +2349,13 @@ where each line of input produces a line of output.} \def\xcolumnfractions{\columnfractions} \newif\ifsetpercent -% #1 is the @columnfraction, usually a decimal number like .5, but might -% be just 1. We just use it, whatever it is. -% -\def\pickupwholefraction#1 {% +% #1 is the part of the @columnfraction before the decimal point, which +% is presumably either 0 or the empty string (but we don't check, we +% just throw it away). #2 is the decimal part, which we use as the +% percent of \hsize for this column. +\def\pickupwholefraction#1.#2 {% \global\advance\colcount by 1 - \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}% + \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}% \setuptable } @@ -2684,33 +2388,18 @@ where each line of input produces a line of output.} \go } -% multitable-only commands. -% -% @headitem starts a heading row, which we typeset in bold. -% Assignments have to be global since we are inside the implicit group -% of an alignment entry. Note that \everycr resets \everytab. -\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}% -% -% A \tab used to include \hskip1sp. But then the space in a template -% line is not enough. That is bad. So let's go back to just `&' until -% we encounter the problem it was intended to solve again. -% --karl, nathan@acm.org, 20apr99. -\def\tab{\checkenv\multitable &\the\everytab}% - % @multitable ... @end multitable definitions: % -\newtoks\everytab % insert after every tab. -% -\envdef\multitable{% +\def\multitable{\parsearg\dotable} +\def\dotable#1{\bgroup \vskip\parskip - \startsavinginserts - % - % @item within a multitable starts a normal row. - % We use \def instead of \let so that if one of the multitable entries - % contains an @itemize, we don't choke on the \item (seen as \crcr aka - % \endtemplate) expanding \doitemize. - \def\item{\crcr}% - % + \let\item=\crcrwithfootnotes + % A \tab used to include \hskip1sp. But then the space in a template + % line is not enough. That is bad. So let's go back to just & until + % we encounter the problem it was intended to solve again. --karl, + % nathan@acm.org, 20apr99. + \let\tab=&% + \let\startfootins=\startsavedfootnote \tolerance=9500 \hbadness=9500 \setmultitablespacing @@ -2718,93 +2407,85 @@ where each line of input produces a line of output.} \parindent=\multitableparindent \overfullrule=0pt \global\colcount=0 - % - \everycr = {% - \noalign{% - \global\everytab={}% - \global\colcount=0 % Reset the column counter. - % Check for saved footnotes, etc. - \checkinserts - % Keeps underfull box messages off when table breaks over pages. - %\filbreak - % Maybe so, but it also creates really weird page breaks when the - % table breaks over pages. Wouldn't \vfil be better? Wait until the - % problem manifests itself, so it can be fixed for real --karl. - }% + \def\Emultitable{% + \global\setpercentfalse + \crcrwithfootnotes\crcr + \egroup\egroup }% % - \parsearg\domultitable -} -\def\domultitable#1{% % To parse everything between @multitable and @item: \setuptable#1 \endsetuptable % + % \everycr will reset column counter, \colcount, at the end of + % each line. Every column entry will cause \colcount to advance by one. + % The table preamble + % looks at the current \colcount to find the correct column width. + \everycr{\noalign{% + % + % \filbreak%% keeps underfull box messages off when table breaks over pages. + % Maybe so, but it also creates really weird page breaks when the table + % breaks over pages. Wouldn't \vfil be better? Wait until the problem + % manifests itself, so it can be fixed for real --karl. + \global\colcount=0\relax}}% + % % This preamble sets up a generic column definition, which will % be used as many times as user calls for columns. % \vtop will set a single line and will also let text wrap and % continue for many paragraphs if desired. - \halign\bgroup &% - \global\advance\colcount by 1 - \multistrut - \vtop{% - % Use the current \colcount to find the correct column width: - \hsize=\expandafter\csname col\the\colcount\endcsname - % - % In order to keep entries from bumping into each other - % we will add a \leftskip of \multitablecolspace to all columns after - % the first one. - % - % If a template has been used, we will add \multitablecolspace - % to the width of each template entry. - % - % If the user has set preamble in terms of percent of \hsize we will - % use that dimension as the width of the column, and the \leftskip - % will keep entries from bumping into each other. Table will start at - % left margin and final column will justify at right margin. - % - % Make sure we don't inherit \rightskip from the outer environment. - \rightskip=0pt - \ifnum\colcount=1 - % The first column will be indented with the surrounding text. - \advance\hsize by\leftskip - \else - \ifsetpercent \else - % If user has not set preamble in terms of percent of \hsize - % we will advance \hsize by \multitablecolspace. - \advance\hsize by \multitablecolspace - \fi - % In either case we will make \leftskip=\multitablecolspace: - \leftskip=\multitablecolspace - \fi - % Ignoring space at the beginning and end avoids an occasional spurious - % blank line, when TeX decides to break the line at the space before the - % box from the multistrut, so the strut ends up on a line by itself. - % For example: - % @multitable @columnfractions .11 .89 - % @item @code{#} - % @tab Legal holiday which is valid in major parts of the whole country. - % Is automatically provided with highlighting sequences respectively - % marking characters. - \noindent\ignorespaces##\unskip\multistrut - }\cr -} -\def\Emultitable{% - \crcr - \egroup % end the \halign - \global\setpercentfalse -} - -\def\setmultitablespacing{% - \def\multistrut{\strut}% just use the standard line spacing - % - % Compute \multitablelinespace (if not defined by user) for use in - % \multitableparskip calculation. We used define \multistrut based on - % this, but (ironically) that caused the spacing to be off. - % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100. + \halign\bgroup&\global\advance\colcount by 1\relax + \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname + % + % In order to keep entries from bumping into each other + % we will add a \leftskip of \multitablecolspace to all columns after + % the first one. + % + % If a template has been used, we will add \multitablecolspace + % to the width of each template entry. + % + % If the user has set preamble in terms of percent of \hsize we will + % use that dimension as the width of the column, and the \leftskip + % will keep entries from bumping into each other. Table will start at + % left margin and final column will justify at right margin. + % + % Make sure we don't inherit \rightskip from the outer environment. + \rightskip=0pt + \ifnum\colcount=1 + % The first column will be indented with the surrounding text. + \advance\hsize by\leftskip + \else + \ifsetpercent \else + % If user has not set preamble in terms of percent of \hsize + % we will advance \hsize by \multitablecolspace. + \advance\hsize by \multitablecolspace + \fi + % In either case we will make \leftskip=\multitablecolspace: + \leftskip=\multitablecolspace + \fi + % Ignoring space at the beginning and end avoids an occasional spurious + % blank line, when TeX decides to break the line at the space before the + % box from the multistrut, so the strut ends up on a line by itself. + % For example: + % @multitable @columnfractions .11 .89 + % @item @code{#} + % @tab Legal holiday which is valid in major parts of the whole country. + % Is automatically provided with highlighting sequences respectively marking + % characters. + \noindent\ignorespaces##\unskip\multistrut}\cr +} + +\def\setmultitablespacing{% test to see if user has set \multitablelinespace. +% If so, do nothing. If not, give it an appropriate dimension based on +% current baselineskip. \ifdim\multitablelinespace=0pt \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip \global\advance\multitablelinespace by-\ht0 -\fi +%% strut to put in table in case some entry doesn't have descenders, +%% to keep lines equally spaced +\let\multistrut = \strut +\else +%% FIXME: what is \box0 supposed to be? +\gdef\multistrut{\vrule height\multitablelinespace depth\dp0 +width0pt\relax} \fi %% Test to see if parskip is larger than space between lines of %% table. If not, do nothing. %% If so, set to same dimension as multitablelinespace. @@ -2819,33 +2500,163 @@ where each line of input produces a line of output.} %% than skip between lines in the table. \fi} +% In case a @footnote appears inside an alignment, save the footnote +% text to a box and make the \insert when a row of the table is +% finished. Otherwise, the insertion is lost, it never migrates to the +% main vertical list. --kasal, 22jan03. +% +\newbox\savedfootnotes +% +% \dotable \let's \startfootins to this, so that \dofootnote will call +% it instead of starting the insertion right away. +\def\startsavedfootnote{% + \global\setbox\savedfootnotes = \vbox\bgroup + \unvbox\savedfootnotes +} +\def\crcrwithfootnotes{% + \crcr + \ifvoid\savedfootnotes \else + \noalign{\insert\footins{\box\savedfootnotes}}% + \fi +} \message{conditionals,} - -% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext, -% @ifnotxml always succeed. They currently do nothing; we don't -% attempt to check whether the conditionals are properly nested. But we -% have to remember that they are conditionals, so that @end doesn't -% attempt to close an environment group. -% -\def\makecond#1{% - \expandafter\let\csname #1\endcsname = \relax - \expandafter\let\csname iscond.#1\endcsname = 1 +% Prevent errors for section commands. +% Used in @ignore and in failing conditionals. +\def\ignoresections{% + \let\chapter=\relax + \let\unnumbered=\relax + \let\top=\relax + \let\unnumberedsec=\relax + \let\unnumberedsection=\relax + \let\unnumberedsubsec=\relax + \let\unnumberedsubsection=\relax + \let\unnumberedsubsubsec=\relax + \let\unnumberedsubsubsection=\relax + \let\section=\relax + \let\subsec=\relax + \let\subsubsec=\relax + \let\subsection=\relax + \let\subsubsection=\relax + \let\appendix=\relax + \let\appendixsec=\relax + \let\appendixsection=\relax + \let\appendixsubsec=\relax + \let\appendixsubsection=\relax + \let\appendixsubsubsec=\relax + \let\appendixsubsubsection=\relax + \let\contents=\relax + \let\smallbook=\relax + \let\titlepage=\relax +} + +% Used in nested conditionals, where we have to parse the Texinfo source +% and so want to turn off most commands, in case they are used +% incorrectly. +% +% We use \empty instead of \relax for the @def... commands, so that \end +% doesn't throw an error. For instance: +% @ignore +% @deffn ... +% @end deffn +% @end ignore +% +% The @end deffn is going to get expanded, because we're trying to allow +% nested conditionals. But we don't want to expand the actual @deffn, +% since it might be syntactically correct and intended to be ignored. +% Since \end checks for \relax, using \empty does not cause an error. +% +\def\ignoremorecommands{% + \let\defcodeindex = \relax + \let\defcv = \empty + \let\defcvx = \empty + \let\Edefcv = \empty + \let\deffn = \empty + \let\deffnx = \empty + \let\Edeffn = \empty + \let\defindex = \relax + \let\defivar = \empty + \let\defivarx = \empty + \let\Edefivar = \empty + \let\defmac = \empty + \let\defmacx = \empty + \let\Edefmac = \empty + \let\defmethod = \empty + \let\defmethodx = \empty + \let\Edefmethod = \empty + \let\defop = \empty + \let\defopx = \empty + \let\Edefop = \empty + \let\defopt = \empty + \let\defoptx = \empty + \let\Edefopt = \empty + \let\defspec = \empty + \let\defspecx = \empty + \let\Edefspec = \empty + \let\deftp = \empty + \let\deftpx = \empty + \let\Edeftp = \empty + \let\deftypefn = \empty + \let\deftypefnx = \empty + \let\Edeftypefn = \empty + \let\deftypefun = \empty + \let\deftypefunx = \empty + \let\Edeftypefun = \empty + \let\deftypeivar = \empty + \let\deftypeivarx = \empty + \let\Edeftypeivar = \empty + \let\deftypemethod = \empty + \let\deftypemethodx = \empty + \let\Edeftypemethod = \empty + \let\deftypeop = \empty + \let\deftypeopx = \empty + \let\Edeftypeop = \empty + \let\deftypevar = \empty + \let\deftypevarx = \empty + \let\Edeftypevar = \empty + \let\deftypevr = \empty + \let\deftypevrx = \empty + \let\Edeftypevr = \empty + \let\defun = \empty + \let\defunx = \empty + \let\Edefun = \empty + \let\defvar = \empty + \let\defvarx = \empty + \let\Edefvar = \empty + \let\defvr = \empty + \let\defvrx = \empty + \let\Edefvr = \empty + \let\clear = \relax + \let\down = \relax + \let\evenfooting = \relax + \let\evenheading = \relax + \let\everyfooting = \relax + \let\everyheading = \relax + \let\headings = \relax + \let\include = \relax + \let\item = \relax + \let\lowersections = \relax + \let\oddfooting = \relax + \let\oddheading = \relax + \let\printindex = \relax + \let\pxref = \relax + \let\raisesections = \relax + \let\ref = \relax + \let\set = \relax + \let\setchapternewpage = \relax + \let\setchapterstyle = \relax + \let\settitle = \relax + \let\up = \relax + \let\verbatiminclude = \relax + \let\xref = \relax } -\makecond{iftex} -\makecond{ifnotdocbook} -\makecond{ifnothtml} -\makecond{ifnotinfo} -\makecond{ifnotplaintext} -\makecond{ifnotxml} % Ignore @ignore, @ifhtml, @ifinfo, and the like. % \def\direntry{\doignore{direntry}} +\def\documentdescriptionword{documentdescription} \def\documentdescription{\doignore{documentdescription}} -\def\docbook{\doignore{docbook}} \def\html{\doignore{html}} -\def\ifdocbook{\doignore{ifdocbook}} \def\ifhtml{\doignore{ifhtml}} \def\ifinfo{\doignore{ifinfo}} \def\ifnottex{\doignore{ifnottex}} @@ -2855,133 +2666,198 @@ where each line of input produces a line of output.} \def\menu{\doignore{menu}} \def\xml{\doignore{xml}} -% Ignore text until a line `@end #1', keeping track of nested conditionals. -% -% A count to remember the depth of nesting. -\newcount\doignorecount +% @dircategory CATEGORY -- specify a category of the dir file +% which this file should belong to. Ignore this in TeX. +\let\dircategory = \comment +% Ignore text until a line `@end #1'. +% \def\doignore#1{\begingroup - % Scan in ``verbatim'' mode: - \catcode`\@ = \other - \catcode`\{ = \other - \catcode`\} = \other + % Don't complain about control sequences we have declared \outer. + \ignoresections + % + % Define a command to swallow text until we reach `@end #1'. + % This @ is a catcode 12 token (that is the normal catcode of @ in + % this texinfo.tex file). We change the catcode of @ below to match. + \long\def\doignoretext##1@end #1{\enddoignore}% % % Make sure that spaces turn into tokens that match what \doignoretext wants. - \spaceisspace + \catcode\spaceChar = 10 % - % Count number of #1's that we've seen. - \doignorecount = 0 + % Ignore braces, too, so mismatched braces don't cause trouble. + \catcode`\{ = 9 + \catcode`\} = 9 % - % Swallow text until we reach the matching `@end #1'. - \dodoignore{#1}% -} - -{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source. - \obeylines % + % We must not have @c interpreted as a control sequence. + \catcode`\@ = 12 % - \gdef\dodoignore#1{% - % #1 contains the command name as a string, e.g., `ifinfo'. - % - % Define a command to find the next `@end #1', which must be on a line - % by itself. - \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}% - % And this command to find another #1 command, at the beginning of a - % line. (Otherwise, we would consider a line `@c @ifset', for - % example, to count as an @ifset for nesting.) - \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}% - % - % And now expand that command. - \obeylines % - \doignoretext ^^M% - }% -} - -\def\doignoreyyy#1{% - \def\temp{#1}% - \ifx\temp\empty % Nothing found. - \let\next\doignoretextzzz - \else % Found a nested condition, ... - \advance\doignorecount by 1 - \let\next\doignoretextyyy % ..., look for another. - % If we're here, #1 ends with ^^M\ifinfo (for example). + \def\ignoreword{#1}% + \ifx\ignoreword\documentdescriptionword + % The c kludge breaks documentdescription, since + % `documentdescription' contains a `c'. Means not everything will + % be ignored inside @documentdescription, but oh well... + \else + % Make the letter c a comment character so that the rest of the line + % will be ignored. This way, the document can have (for example) + % @c @end ifinfo + % and the @end ifinfo will be properly ignored. + % (We've just changed @ to catcode 12.) + \catcode`\c = 14 \fi - \next #1% the token \_STOP_ is present just after this macro. + % + % And now expand the command defined above. + \doignoretext +} + +% What we do to finish off ignored text. +% +\def\enddoignore{\endgroup\ignorespaces}% + +\newif\ifwarnedobs\warnedobsfalse +\def\obstexwarn{% + \ifwarnedobs\relax\else + % We need to warn folks that they may have trouble with TeX 3.0. + % This uses \immediate\write16 rather than \message to get newlines. + \immediate\write16{} + \immediate\write16{WARNING: for users of Unix TeX 3.0!} + \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} + \immediate\write16{If you are running another version of TeX, relax.} + \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} + \immediate\write16{ Then upgrade your TeX installation if you can.} + \immediate\write16{ (See ftp://ftp.gnu.org/non-gnu/TeX.README.)} + \immediate\write16{If you are stuck with version 3.0, run the} + \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} + \immediate\write16{ to use a workaround.} + \immediate\write16{} + \global\warnedobstrue + \fi } -% We have to swallow the remaining "\_STOP_". +% **In TeX 3.0, setting text in \nullfont hangs tex. For a +% workaround (which requires the file ``dummy.tfm'' to be installed), +% uncomment the following line: +%%%%%\font\nullfont=dummy\let\obstexwarn=\relax + +% Ignore text, except that we keep track of conditional commands for +% purposes of nesting, up to an `@end #1' command. % -\def\doignoretextzzz#1{% - \ifnum\doignorecount = 0 % We have just found the outermost @end. - \let\next\enddoignore - \else % Still inside a nested condition. - \advance\doignorecount by -1 - \let\next\doignoretext % Look for the next @end. - \fi - \next +\def\nestedignore#1{% + \obstexwarn + % We must actually expand the ignored text to look for the @end + % command, so that nested ignore constructs work. Thus, we put the + % text into a \vbox and then do nothing with the result. To minimize + % the chance of memory overflow, we follow the approach outlined on + % page 401 of the TeXbook. + % + \setbox0 = \vbox\bgroup + % Don't complain about control sequences we have declared \outer. + \ignoresections + % + % Define `@end #1' to end the box, which will in turn undefine the + % @end command again. + \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% + % + % We are going to be parsing Texinfo commands. Most cause no + % trouble when they are used incorrectly, but some commands do + % complicated argument parsing or otherwise get confused, so we + % undefine them. + % + % We can't do anything about stray @-signs, unfortunately; + % they'll produce `undefined control sequence' errors. + \ignoremorecommands + % + % Set the current font to be \nullfont, a TeX primitive, and define + % all the font commands to also use \nullfont. We don't use + % dummy.tfm, as suggested in the TeXbook, because some sites + % might not have that installed. Therefore, math mode will still + % produce output, but that should be an extremely small amount of + % stuff compared to the main input. + % + \nullfont + \let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont + \let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont + \let\tensf=\nullfont + % Similarly for index fonts. + \let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont + \let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont + \let\smallsf=\nullfont + % Similarly for smallexample fonts. + \let\smallerrm=\nullfont \let\smallerit=\nullfont \let\smallersl=\nullfont + \let\smallerbf=\nullfont \let\smallertt=\nullfont \let\smallersc=\nullfont + \let\smallersf=\nullfont + % + % Don't complain when characters are missing from the fonts. + \tracinglostchars = 0 + % + % Don't bother to do space factor calculations. + \frenchspacing + % + % Don't report underfull hboxes. + \hbadness = 10000 + % + % Do minimal line-breaking. + \pretolerance = 10000 + % + % Do not execute instructions in @tex. + \def\tex{\doignore{tex}}% + % Do not execute macro definitions. + % `c' is a comment character, so the word `macro' will get cut off. + \def\macro{\doignore{ma}}% } -% Finish off ignored text. -\def\enddoignore{\endgroup\ignorespaces} - - % @set VAR sets the variable VAR to an empty value. % @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. % % Since we want to separate VAR from REST-OF-LINE (which might be % empty), we can't just use \parsearg; we have to insert a space of our % own to delimit the rest of the line, and then take it out again if we -% didn't need it. -% We rely on the fact that \parsearg sets \catcode`\ =10. +% didn't need it. Make sure the catcode of space is correct to avoid +% losing inside @example, for instance. % -\parseargdef\set{\setyyy#1 \endsetyyy} +\def\set{\begingroup\catcode` =10 + \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. + \parsearg\setxxx} +\def\setxxx#1{\setyyy#1 \endsetyyy} \def\setyyy#1 #2\endsetyyy{% - {% - \makevalueexpandable - \def\temp{#2}% - \edef\next{\gdef\makecsname{SET#1}}% - \ifx\temp\empty - \next{}% - \else - \setzzz#2\endsetzzz - \fi - }% + \def\temp{#2}% + \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty + \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. + \fi + \endgroup } -% Remove the trailing space \setxxx inserted. -\def\setzzz#1 \endsetzzz{\next{#1}} +% Can't use \xdef to pre-expand #2 and save some time, since \temp or +% \next or other control sequences that we've defined might get us into +% an infinite loop. Consider `@set foo @cite{bar}'. +\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} % @clear VAR clears (i.e., unsets) the variable VAR. % -\parseargdef\clear{% - {% - \makevalueexpandable - \global\expandafter\let\csname SET#1\endcsname=\relax - }% -} +\def\clear{\parsearg\clearxxx} +\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} % @value{foo} gets the text saved in variable foo. -\def\value{\begingroup\makevalueexpandable\valuexxx} -\def\valuexxx#1{\expandablevalue{#1}\endgroup} { - \catcode`\- = \active \catcode`\_ = \active + \catcode`\_ = \active % - \gdef\makevalueexpandable{% - \let\value = \expandablevalue - % We don't want these characters active, ... + % We might end up with active _ or - characters in the argument if + % we're called from @code, as @code{@value{foo-bar_}}. So \let any + % such active characters to their normal equivalents. + \gdef\value{\begingroup \catcode`\-=\other \catcode`\_=\other - % ..., but we might end up with active ones in the argument if - % we're called from @code, as @code{@value{foo-bar_}}, though. - % So \let them to their normal equivalents. - \let-\realdash \let_\normalunderscore - } + \indexbreaks \let_\normalunderscore + \valuexxx} } +\def\valuexxx#1{\expandablevalue{#1}\endgroup} % We have this subroutine so that we can handle at least some @value's -% properly in indexes (we call \makevalueexpandable in \indexdummies). -% The command has to be fully expandable (if the variable is set), since -% the result winds up in the index file. This means that if the -% variable's value contains other Texinfo commands, it's almost certain -% it will fail (although perhaps we could fix that with sufficient work -% to do a one-level expansion on the result, instead of complete). +% properly in indexes (we \let\value to this in \indexdummies). Ones +% whose names contain - or _ still won't work, but we can't do anything +% about that. The command has to be fully expandable (if the variable +% is set), since the result winds up in the index file. This means that +% if the variable's value contains other Texinfo commands, it's almost +% certain it will fail (although perhaps we could fix that with +% sufficient work to do a one-level expansion on the result, instead of +% complete). % \def\expandablevalue#1{% \expandafter\ifx\csname SET#1\endcsname\relax @@ -2995,36 +2871,55 @@ where each line of input produces a line of output.} % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined % with @set. % -% To get special treatment of `@end ifset,' call \makeond and the redefine. -% -\makecond{ifset} -\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}} -\def\doifset#1#2{% - {% - \makevalueexpandable - \let\next=\empty - \expandafter\ifx\csname SET#2\endcsname\relax - #1% If not set, redefine \next. - \fi - \expandafter - }\next +\def\ifset{\parsearg\doifset} +\def\doifset#1{% + \expandafter\ifx\csname SET#1\endcsname\relax + \let\next=\ifsetfail + \else + \let\next=\ifsetsucceed + \fi + \next } -\def\ifsetfail{\doignore{ifset}} +\def\ifsetsucceed{\conditionalsucceed{ifset}} +\def\ifsetfail{\nestedignore{ifset}} +\defineunmatchedend{ifset} % @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been % defined with @set, or has been undefined with @clear. % -% The `\else' inside the `\doifset' parameter is a trick to reuse the -% above code: if the variable is not set, do nothing, if it is set, -% then redefine \next to \ifclearfail. +\def\ifclear{\parsearg\doifclear} +\def\doifclear#1{% + \expandafter\ifx\csname SET#1\endcsname\relax + \let\next=\ifclearsucceed + \else + \let\next=\ifclearfail + \fi + \next +} +\def\ifclearsucceed{\conditionalsucceed{ifclear}} +\def\ifclearfail{\nestedignore{ifclear}} +\defineunmatchedend{ifclear} + +% @iftex, @ifnothtml, @ifnotinfo, @ifnotplaintext always succeed; we +% read the text following, through the first @end iftex (etc.). Make +% `@end iftex' (etc.) valid only after an @iftex. % -\makecond{ifclear} -\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}} -\def\ifclearfail{\doignore{ifclear}} +\def\iftex{\conditionalsucceed{iftex}} +\def\ifnothtml{\conditionalsucceed{ifnothtml}} +\def\ifnotinfo{\conditionalsucceed{ifnotinfo}} +\def\ifnotplaintext{\conditionalsucceed{ifnotplaintext}} +\defineunmatchedend{iftex} +\defineunmatchedend{ifnothtml} +\defineunmatchedend{ifnotinfo} +\defineunmatchedend{ifnotplaintext} -% @dircategory CATEGORY -- specify a category of the dir file -% which this file should belong to. Ignore this in TeX. -\let\dircategory=\comment +% True conditional. Since \set globally defines its variables, we can +% just start and end a group (to keep the @end definition undefined at +% the outer level). +% +\def\conditionalsucceed#1{\begingroup + \expandafter\def\csname E#1\endcsname{\endgroup}% +} % @defininfoenclose. \let\definfoenclose=\comment @@ -3034,8 +2929,9 @@ where each line of input produces a line of output.} % Index generation facilities % Define \newwrite to be identical to plain tex's \newwrite -% except not \outer, so it can be used within macros and \if's. -\edef\newwrite{\makecsname{ptexnewwrite}} +% except not \outer, so it can be used within \newindex. +{\catcode`\@=11 +\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}} % \newindex {foo} defines an index named foo. % It automatically defines \fooindex such that @@ -3148,7 +3044,6 @@ where each line of input produces a line of output.} \def\definedummyletter##1{% \expandafter\def\csname ##1\endcsname{\realbackslash ##1}% }% - \let\definedummyaccent\definedummyletter % % Do the redefinitions. \commondummies @@ -3171,7 +3066,6 @@ where each line of input produces a line of output.} \def\definedummyletter##1{% \expandafter\def\csname ##1\endcsname{@##1}% }% - \let\definedummyaccent\definedummyletter % % Do the redefinitions. \commondummies @@ -3184,11 +3078,26 @@ where each line of input produces a line of output.} % \normalturnoffactive % - \commondummiesnofonts - % + % Control letters and accents. \definedummyletter{_}% - % - % Non-English letters. + \definedummyletter{,}% + \definedummyletter{"}% + \definedummyletter{`}% + \definedummyletter{'}% + \definedummyletter{^}% + \definedummyletter{~}% + \definedummyletter{=}% + \definedummyword{u}% + \definedummyword{v}% + \definedummyword{H}% + \definedummyword{dotaccent}% + \definedummyword{ringaccent}% + \definedummyword{tieaccent}% + \definedummyword{ubaraccent}% + \definedummyword{udotaccent}% + \definedummyword{dotless}% + % + % Other non-English letters. \definedummyword{AA}% \definedummyword{AE}% \definedummyword{L}% @@ -3200,10 +3109,6 @@ where each line of input produces a line of output.} \definedummyword{oe}% \definedummyword{o}% \definedummyword{ss}% - \definedummyword{exclamdown}% - \definedummyword{questiondown}% - \definedummyword{ordf}% - \definedummyword{ordm}% % % Although these internal commands shouldn't show up, sometimes they do. \definedummyword{bf}% @@ -3215,19 +3120,41 @@ where each line of input produces a line of output.} \definedummyword{tclose}% \definedummyword{tt}% % - \definedummyword{LaTeX}% + % Texinfo font commands. + \definedummyword{b}% + \definedummyword{i}% + \definedummyword{r}% + \definedummyword{sc}% + \definedummyword{t}% + % \definedummyword{TeX}% + \definedummyword{acronym}% + \definedummyword{cite}% + \definedummyword{code}% + \definedummyword{command}% + \definedummyword{dfn}% + \definedummyword{dots}% + \definedummyword{emph}% + \definedummyword{env}% + \definedummyword{file}% + \definedummyword{kbd}% + \definedummyword{key}% + \definedummyword{math}% + \definedummyword{option}% + \definedummyword{samp}% + \definedummyword{strong}% + \definedummyword{uref}% + \definedummyword{url}% + \definedummyword{var}% + \definedummyword{w}% % % Assorted special characters. \definedummyword{bullet}% - \definedummyword{comma}% \definedummyword{copyright}% - \definedummyword{registeredsymbol}% \definedummyword{dots}% \definedummyword{enddots}% \definedummyword{equiv}% \definedummyword{error}% - \definedummyword{euro}% \definedummyword{expansion}% \definedummyword{minus}% \definedummyword{pounds}% @@ -3235,9 +3162,10 @@ where each line of input produces a line of output.} \definedummyword{print}% \definedummyword{result}% % - % Handle some cases of @value -- where it does not contain any + % Handle some cases of @value -- where the variable name does not + % contain - or _, and the value does not contain any % (non-fully-expandable) commands. - \makevalueexpandable + \let\value = \expandablevalue % % Normal spaces, not active ones. \unsepspaces @@ -3246,97 +3174,45 @@ where each line of input produces a line of output.} \turnoffmacros } -% \commondummiesnofonts: common to \commondummies and \indexnofonts. -% -% Better have this without active chars. -{ - \catcode`\~=\other - \gdef\commondummiesnofonts{% - % Control letters and accents. - \definedummyletter{!}% - \definedummyaccent{"}% - \definedummyaccent{'}% - \definedummyletter{*}% - \definedummyaccent{,}% - \definedummyletter{.}% - \definedummyletter{/}% - \definedummyletter{:}% - \definedummyaccent{=}% - \definedummyletter{?}% - \definedummyaccent{^}% - \definedummyaccent{`}% - \definedummyaccent{~}% - \definedummyword{u}% - \definedummyword{v}% - \definedummyword{H}% - \definedummyword{dotaccent}% - \definedummyword{ringaccent}% - \definedummyword{tieaccent}% - \definedummyword{ubaraccent}% - \definedummyword{udotaccent}% - \definedummyword{dotless}% - % - % Texinfo font commands. - \definedummyword{b}% - \definedummyword{i}% - \definedummyword{r}% - \definedummyword{sc}% - \definedummyword{t}% - % - % Commands that take arguments. - \definedummyword{acronym}% - \definedummyword{cite}% - \definedummyword{code}% - \definedummyword{command}% - \definedummyword{dfn}% - \definedummyword{emph}% - \definedummyword{env}% - \definedummyword{file}% - \definedummyword{kbd}% - \definedummyword{key}% - \definedummyword{math}% - \definedummyword{option}% - \definedummyword{samp}% - \definedummyword{strong}% - \definedummyword{tie}% - \definedummyword{uref}% - \definedummyword{url}% - \definedummyword{var}% - \definedummyword{verb}% - \definedummyword{w}% - } -} +% If an index command is used in an @example environment, any spaces +% therein should become regular spaces in the raw index file, not the +% expansion of \tie (\leavevmode \penalty \@M \ ). +{\obeyspaces + \gdef\unsepspaces{\obeyspaces\let =\space}} + % \indexnofonts is used when outputting the strings to sort the index % by, and when constructing control sequence names. It eliminates all % control sequences and just writes whatever the best ASCII sort string % would be for a given command (usually its argument). % +\def\indexdummytex{TeX} +\def\indexdummydots{...} +% \def\indexnofonts{% - % Accent commands should become @asis. - \def\definedummyaccent##1{% - \expandafter\let\csname ##1\endcsname\asis - }% - % We can just ignore other control letters. - \def\definedummyletter##1{% - \expandafter\def\csname ##1\endcsname{}% - }% - % Hopefully, all control words can become @asis. - \let\definedummyword\definedummyaccent - % - \commondummiesnofonts - % - % Don't no-op \tt, since it isn't a user-level command - % and is used in the definitions of the active chars like <, >, |, etc. - % Likewise with the other plain tex font commands. - %\let\tt=\asis - % \def\ { }% \def\@{@}% % how to handle braces? \def\_{\normalunderscore}% % - % Non-English letters. + \let\,=\asis + \let\"=\asis + \let\`=\asis + \let\'=\asis + \let\^=\asis + \let\~=\asis + \let\==\asis + \let\u=\asis + \let\v=\asis + \let\H=\asis + \let\dotaccent=\asis + \let\ringaccent=\asis + \let\tieaccent=\asis + \let\ubaraccent=\asis + \let\udotaccent=\asis + \let\dotless=\asis + % + % Other non-English letters. \def\AA{AA}% \def\AE{AE}% \def\L{L}% @@ -3350,170 +3226,130 @@ where each line of input produces a line of output.} \def\ss{ss}% \def\exclamdown{!}% \def\questiondown{?}% - \def\ordf{a}% - \def\ordm{o}% % - \def\LaTeX{LaTeX}% - \def\TeX{TeX}% + % Don't no-op \tt, since it isn't a user-level command + % and is used in the definitions of the active chars like <, >, |, etc. + % Likewise with the other plain tex font commands. + %\let\tt=\asis % - % Assorted special characters. - % (The following {} will end up in the sort string, but that's ok.) - \def\bullet{bullet}% - \def\comma{,}% - \def\copyright{copyright}% - \def\registeredsymbol{R}% - \def\dots{...}% - \def\enddots{...}% - \def\equiv{==}% - \def\error{error}% - \def\euro{euro}% - \def\expansion{==>}% - \def\minus{-}% - \def\pounds{pounds}% - \def\point{.}% - \def\print{-|}% - \def\result{=>}% - % - % Don't write macro names. - \emptyusermacros + % Texinfo font commands. + \let\b=\asis + \let\i=\asis + \let\r=\asis + \let\sc=\asis + \let\t=\asis + % + \let\TeX=\indexdummytex + \let\acronym=\asis + \let\cite=\asis + \let\code=\asis + \let\command=\asis + \let\dfn=\asis + \let\dots=\indexdummydots + \let\emph=\asis + \let\env=\asis + \let\file=\asis + \let\kbd=\asis + \let\key=\asis + \let\math=\asis + \let\option=\asis + \let\samp=\asis + \let\strong=\asis + \let\uref=\asis + \let\url=\asis + \let\var=\asis + \let\w=\asis } \let\indexbackslash=0 %overridden during \printindex. \let\SETmarginindex=\relax % put index entries in margin (undocumented)? +% For \ifx comparisons. +\def\emptymacro{\empty} + % Most index entries go through here, but \dosubind is the general case. -% #1 is the index name, #2 is the entry text. -\def\doind#1#2{\dosubind{#1}{#2}{}} +% +\def\doind#1#2{\dosubind{#1}{#2}\empty} % Workhorse for all \fooindexes. % #1 is name of index, #2 is stuff to put there, #3 is subentry -- -% empty if called from \doind, as we usually are (the main exception -% is with most defuns, which call us directly). +% \empty if called from \doind, as we usually are. The main exception +% is with defuns, which call us directly. % \def\dosubind#1#2#3{% - \iflinks - {% - % Store the main index entry text (including the third arg). - \toks0 = {#2}% - % If third arg is present, precede it with a space. - \def\thirdarg{#3}% - \ifx\thirdarg\empty \else - \toks0 = \expandafter{\the\toks0 \space #3}% - \fi - % - \edef\writeto{\csname#1indfile\endcsname}% - % - \ifvmode - \dosubindsanitize - \else - \dosubindwrite - \fi - }% - \fi -} - -% Write the entry in \toks0 to the index file: -% -\def\dosubindwrite{% % Put the index entry in the margin if desired. \ifx\SETmarginindex\relax\else - \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}% + \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}% \fi - % - % Remember, we are within a group. - \indexdummies % Must do this here, since \bf, etc expand at this stage - \escapechar=`\\ - \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now - % so it will be output as is; and it will print as backslash. - % - % Process the index entry with all font commands turned off, to - % get the string to sort by. - {\indexnofonts - \edef\temp{\the\toks0}% need full expansion - \xdef\indexsorttmp{\temp}% - }% - % - % Set up the complete index entry, with both the sort key and - % the original text, including any font commands. We write - % three arguments to \entry to the .?? file (four in the - % subentry case), texindex reduces to two when writing the .??s - % sorted result. - \edef\temp{% - \write\writeto{% - \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}% + {% + \count255=\lastpenalty + {% + \indexdummies % Must do this here, since \bf, etc expand at this stage + \escapechar=`\\ + {% + \let\folio = 0% We will expand all macros now EXCEPT \folio. + \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now + % so it will be output as is; and it will print as backslash. + % + % The main index entry text. + \toks0 = {#2}% + % + % If third arg is present, precede it with space in sort key. + \def\thirdarg{#3}% + \ifx\thirdarg\emptymacro \else + % If the third (subentry) arg is present, add it to the index + % line to write. + \toks0 = \expandafter{\the\toks0 \space #3}% + \fi + % + % Process the index entry with all font commands turned off, to + % get the string to sort by. + {\indexnofonts + \edef\temp{\the\toks0}% need full expansion + \xdef\indexsorttmp{\temp}% + }% + % + % Set up the complete index entry, with both the sort key and + % the original text, including any font commands. We write + % three arguments to \entry to the .?? file (four in the + % subentry case), texindex reduces to two when writing the .??s + % sorted result. + \edef\temp{% + \write\csname#1indfile\endcsname{% + \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}% + }% + % + % If a skip is the last thing on the list now, preserve it + % by backing up by \lastskip, doing the \write, then inserting + % the skip again. Otherwise, the whatsit generated by the + % \write will make \lastskip zero. The result is that sequences + % like this: + % @end defun + % @tindex whatever + % @defun ... + % will have extra space inserted, because the \medbreak in the + % start of the @defun won't see the skip inserted by the @end of + % the previous defun. + % + % But don't do any of this if we're not in vertical mode. We + % don't want to do a \vskip and prematurely end a paragraph. + % + % Avoid page breaks due to these extra skips, too. + % + \iflinks + \ifvmode + \skip0 = \lastskip + \ifdim\lastskip = 0pt \else \nobreak\vskip-\skip0 \fi + \fi + % + \temp % do the write + % + \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi + \fi + }% + }% + \penalty\count255 }% - \temp -} - -% Take care of unwanted page breaks: -% -% If a skip is the last thing on the list now, preserve it -% by backing up by \lastskip, doing the \write, then inserting -% the skip again. Otherwise, the whatsit generated by the -% \write will make \lastskip zero. The result is that sequences -% like this: -% @end defun -% @tindex whatever -% @defun ... -% will have extra space inserted, because the \medbreak in the -% start of the @defun won't see the skip inserted by the @end of -% the previous defun. -% -% But don't do any of this if we're not in vertical mode. We -% don't want to do a \vskip and prematurely end a paragraph. -% -% Avoid page breaks due to these extra skips, too. -% -% But wait, there is a catch there: -% We'll have to check whether \lastskip is zero skip. \ifdim is not -% sufficient for this purpose, as it ignores stretch and shrink parts -% of the skip. The only way seems to be to check the textual -% representation of the skip. -% -% The following is almost like \def\zeroskipmacro{0.0pt} except that -% the ``p'' and ``t'' characters have catcode \other, not 11 (letter). -% -\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname} -% -% ..., ready, GO: -% -\def\dosubindsanitize{% - % \lastskip and \lastpenalty cannot both be nonzero simultaneously. - \skip0 = \lastskip - \edef\lastskipmacro{\the\lastskip}% - \count255 = \lastpenalty - % - % If \lastskip is nonzero, that means the last item was a - % skip. And since a skip is discardable, that means this - % -\skip0 glue we're inserting is preceded by a - % non-discardable item, therefore it is not a potential - % breakpoint, therefore no \nobreak needed. - \ifx\lastskipmacro\zeroskipmacro - \else - \vskip-\skip0 - \fi - % - \dosubindwrite - % - \ifx\lastskipmacro\zeroskipmacro - % If \lastskip was zero, perhaps the last item was a penalty, and - % perhaps it was >=10000, e.g., a \nobreak. In that case, we want - % to re-insert the same penalty (values >10000 are used for various - % signals); since we just inserted a non-discardable item, any - % following glue (such as a \parskip) would be a breakpoint. For example: - % - % @deffn deffn-whatever - % @vindex index-whatever - % Description. - % would allow a break between the index-whatever whatsit - % and the "Description." paragraph. - \ifnum\count255>9999 \penalty\count255 \fi - \else - % On the other hand, if we had a nonzero \lastskip, - % this make-up glue would be preceded by a non-discardable item - % (the whatsit from the \write), so we must insert a \nobreak. - \nobreak\vskip\skip0 - \fi } % The index entry written in the file actually looks like @@ -3551,12 +3387,14 @@ where each line of input produces a line of output.} % @printindex causes a particular index (the ??s file) to get printed. % It does not print any chapter heading (usually an @unnumbered). % -\parseargdef\printindex{\begingroup +\def\printindex{\parsearg\doprintindex} +\def\doprintindex#1{\begingroup \dobreak \chapheadingskip{10000}% % \smallfonts \rm \tolerance = 9500 \everypar = {}% don't want the \kern\-parindent from indentation suppression. + \indexbreaks % % See if the index file exists and is nonempty. % Change catcode of @ here so that if the index file contains @@ -3583,7 +3421,7 @@ where each line of input produces a line of output.} % Index files are almost Texinfo source, but we use \ as the escape % character. It would be better to use @, but that's too big a change % to make right now. - \def\indexbackslash{\backslashcurfont}% + \def\indexbackslash{\rawbackslashxx}% \catcode`\\ = 0 \escapechar = `\\ \begindoublecolumns @@ -3605,10 +3443,7 @@ where each line of input produces a line of output.} \removelastskip % % We like breaks before the index initials, so insert a bonus. - \nobreak - \vskip 0pt plus 3\baselineskip - \penalty 0 - \vskip 0pt plus -3\baselineskip + \penalty -300 % % Typeset the initial. Making this add up to a whole number of % baselineskips increases the chance of the dots lining up from column @@ -3618,100 +3453,80 @@ where each line of input produces a line of output.} % No shrink because it confuses \balancecolumns. \vskip 1.67\baselineskip plus .5\baselineskip \leftline{\secbf #1}% + \vskip .33\baselineskip plus .1\baselineskip + % % Do our best not to break after the initial. \nobreak - \vskip .33\baselineskip plus .1\baselineskip }} -% \entry typesets a paragraph consisting of the text (#1), dot leaders, and -% then page number (#2) flushed to the right margin. It is used for index -% and table of contents entries. The paragraph is indented by \leftskip. +% This typesets a paragraph consisting of #1, dot leaders, and then #2 +% flush to the right margin. It is used for index and table of contents +% entries. The paragraph is indented by \leftskip. % -% A straightforward implementation would start like this: -% \def\entry#1#2{... -% But this frozes the catcodes in the argument, and can cause problems to -% @code, which sets - active. This problem was fixed by a kludge--- -% ``-'' was active throughout whole index, but this isn't really right. -% -% The right solution is to prevent \entry from swallowing the whole text. -% --kasal, 21nov03 -\def\entry{% - \begingroup - % - % Start a new paragraph if necessary, so our assignments below can't - % affect previous text. - \par - % - % Do not fill out the last line with white space. - \parfillskip = 0in - % - % No extra space above this paragraph. - \parskip = 0in - % - % Do not prefer a separate line ending with a hyphen to fewer lines. - \finalhyphendemerits = 0 - % - % \hangindent is only relevant when the entry text and page number - % don't both fit on one line. In that case, bob suggests starting the - % dots pretty far over on the line. Unfortunately, a large - % indentation looks wrong when the entry text itself is broken across - % lines. So we use a small indentation and put up with long leaders. - % - % \hangafter is reset to 1 (which is the value we want) at the start - % of each paragraph, so we need not do anything with that. - \hangindent = 2em - % - % When the entry text needs to be broken, just fill out the first line - % with blank space. - \rightskip = 0pt plus1fil - % - % A bit of stretch before each entry for the benefit of balancing - % columns. - \vskip 0pt plus1pt +\def\entry#1#2{\begingroup + % + % Start a new paragraph if necessary, so our assignments below can't + % affect previous text. + \par + % + % Do not fill out the last line with white space. + \parfillskip = 0in + % + % No extra space above this paragraph. + \parskip = 0in + % + % Do not prefer a separate line ending with a hyphen to fewer lines. + \finalhyphendemerits = 0 + % + % \hangindent is only relevant when the entry text and page number + % don't both fit on one line. In that case, bob suggests starting the + % dots pretty far over on the line. Unfortunately, a large + % indentation looks wrong when the entry text itself is broken across + % lines. So we use a small indentation and put up with long leaders. + % + % \hangafter is reset to 1 (which is the value we want) at the start + % of each paragraph, so we need not do anything with that. + \hangindent = 2em + % + % When the entry text needs to be broken, just fill out the first line + % with blank space. + \rightskip = 0pt plus1fil + % + % A bit of stretch before each entry for the benefit of balancing columns. + \vskip 0pt plus1pt + % + % Start a ``paragraph'' for the index entry so the line breaking + % parameters we've set above will have an effect. + \noindent + % + % Insert the text of the index entry. TeX will do line-breaking on it. + #1% + % The following is kludged to not output a line of dots in the index if + % there are no page numbers. The next person who breaks this will be + % cursed by a Unix daemon. + \def\tempa{{\rm }}% + \def\tempb{#2}% + \edef\tempc{\tempa}% + \edef\tempd{\tempb}% + \ifx\tempc\tempd\ \else% % - % Swallow the left brace of the text (first parameter): - \afterassignment\doentry - \let\temp = -} -\def\doentry{% - \bgroup % Instead of the swallowed brace. - \noindent - \aftergroup\finishentry - % And now comes the text of the entry. -} -\def\finishentry#1{% - % #1 is the page number. + % If we must, put the page number on a line of its own, and fill out + % this line with blank space. (The \hfil is overwhelmed with the + % fill leaders glue in \indexdotfill if the page number does fit.) + \hfil\penalty50 + \null\nobreak\indexdotfill % Have leaders before the page number. % - % The following is kludged to not output a line of dots in the index if - % there are no page numbers. The next person who breaks this will be - % cursed by a Unix daemon. - \def\tempa{{\rm }}% - \def\tempb{#1}% - \edef\tempc{\tempa}% - \edef\tempd{\tempb}% - \ifx\tempc\tempd - \ % + % The `\ ' here is removed by the implicit \unskip that TeX does as + % part of (the primitive) \par. Without it, a spurious underfull + % \hbox ensues. + \ifpdf + \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. \else - % - % If we must, put the page number on a line of its own, and fill out - % this line with blank space. (The \hfil is overwhelmed with the - % fill leaders glue in \indexdotfill if the page number does fit.) - \hfil\penalty50 - \null\nobreak\indexdotfill % Have leaders before the page number. - % - % The `\ ' here is removed by the implicit \unskip that TeX does as - % part of (the primitive) \par. Without it, a spurious underfull - % \hbox ensues. - \ifpdf - \pdfgettoks#1.% - \ \the\toksA - \else - \ #1% - \fi + \ #2% The page number ends the paragraph. \fi - \par - \endgroup -} + \fi% + \par +\endgroup} % Like \dotfill except takes at least 1 em. \def\indexdotfill{\cleaders @@ -3880,12 +3695,6 @@ where each line of input produces a line of output.} \message{sectioning,} % Chapters, sections, etc. -% \unnumberedno is an oxymoron, of course. But we count the unnumbered -% sections so that we can refer to them unambiguously in the pdf -% outlines by their "section number". We avoid collisions with chapter -% numbers by starting them at 10000. (If a document ever has 10000 -% chapters, we're in trouble anyway, I'm sure.) -\newcount\unnumberedno \unnumberedno = 10000 \newcount\chapno \newcount\secno \secno=0 \newcount\subsecno \subsecno=0 @@ -3893,12 +3702,9 @@ where each line of input produces a line of output.} % This counter is funny since it counts through charcodes of letters A, B, ... \newcount\appendixno \appendixno = `\@ -% % \def\appendixletter{\char\the\appendixno} -% We do the following ugly conditional instead of the above simple -% construct for the sake of pdftex, which needs the actual +% We do the following for the sake of pdftex, which needs the actual % letter in the expansion, not just typeset. -% \def\appendixletter{% \ifnum\appendixno=`A A% \else\ifnum\appendixno=`B B% @@ -3936,12 +3742,11 @@ where each line of input produces a line of output.} % Each @chapter defines this as the name of the chapter. % page headings and footings can use it. @section does likewise. -% However, they are not reliable, because we don't use marks. \def\thischapter{} \def\thissection{} \newcount\absseclevel % used to calculate proper heading level -\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count +\newcount\secbase\secbase=0 % @raise/lowersections modify this count % @raisesections: treat @section as chapter, @subsection as section, etc. \def\raisesections{\global\advance\secbase by -1} @@ -3951,142 +3756,121 @@ where each line of input produces a line of output.} \def\lowersections{\global\advance\secbase by 1} \let\down=\lowersections % original BFox name -% we only have subsub. -\chardef\maxseclevel = 3 -% -% A numbered section within an unnumbered changes to unnumbered too. -% To achive this, remember the "biggest" unnum. sec. we are currently in: -\chardef\unmlevel = \maxseclevel -% -% Trace whether the current chapter is an appendix or not: -% \chapheadtype is "N" or "A", unnumbered chapters are ignored. -\def\chapheadtype{N} - -% Choose a heading macro -% #1 is heading type -% #2 is heading level -% #3 is text for heading -\def\genhead#1#2#3{% - % Compute the abs. sec. level: - \absseclevel=#2 - \advance\absseclevel by \secbase - % Make sure \absseclevel doesn't fall outside the range: - \ifnum \absseclevel < 0 - \absseclevel = 0 +% Choose a numbered-heading macro +% #1 is heading level if unmodified by @raisesections or @lowersections +% #2 is text for heading +\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 +\ifcase\absseclevel + \chapterzzz{#2} +\or + \seczzz{#2} +\or + \numberedsubseczzz{#2} +\or + \numberedsubsubseczzz{#2} +\else + \ifnum \absseclevel<0 + \chapterzzz{#2} \else - \ifnum \absseclevel > 3 - \absseclevel = 3 - \fi + \numberedsubsubseczzz{#2} \fi - % The heading type: - \def\headtype{#1}% - \if \headtype U% - \ifnum \absseclevel < \unmlevel - \chardef\unmlevel = \absseclevel - \fi +\fi +\suppressfirstparagraphindent +} + +% like \numhead, but chooses appendix heading levels +\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 +\ifcase\absseclevel + \appendixzzz{#2} +\or + \appendixsectionzzz{#2} +\or + \appendixsubseczzz{#2} +\or + \appendixsubsubseczzz{#2} +\else + \ifnum \absseclevel<0 + \appendixzzz{#2} \else - % Check for appendix sections: - \ifnum \absseclevel = 0 - \edef\chapheadtype{\headtype}% - \else - \if \headtype A\if \chapheadtype N% - \errmessage{@appendix... within a non-appendix chapter}% - \fi\fi - \fi - % Check for numbered within unnumbered: - \ifnum \absseclevel > \unmlevel - \def\headtype{U}% - \else - \chardef\unmlevel = 3 - \fi + \appendixsubsubseczzz{#2} \fi - % Now print the heading: - \if \headtype U% - \ifcase\absseclevel - \unnumberedzzz{#3}% - \or \unnumberedseczzz{#3}% - \or \unnumberedsubseczzz{#3}% - \or \unnumberedsubsubseczzz{#3}% - \fi +\fi +\suppressfirstparagraphindent +} + +% like \numhead, but chooses numberless heading levels +\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 +\ifcase\absseclevel + \unnumberedzzz{#2} +\or + \unnumberedseczzz{#2} +\or + \unnumberedsubseczzz{#2} +\or + \unnumberedsubsubseczzz{#2} +\else + \ifnum \absseclevel<0 + \unnumberedzzz{#2} \else - \if \headtype A% - \ifcase\absseclevel - \appendixzzz{#3}% - \or \appendixsectionzzz{#3}% - \or \appendixsubseczzz{#3}% - \or \appendixsubsubseczzz{#3}% - \fi - \else - \ifcase\absseclevel - \chapterzzz{#3}% - \or \seczzz{#3}% - \or \numberedsubseczzz{#3}% - \or \numberedsubsubseczzz{#3}% - \fi - \fi + \unnumberedsubsubseczzz{#2} \fi - \suppressfirstparagraphindent -} - -% an interface: -\def\numhead{\genhead N} -\def\apphead{\genhead A} -\def\unnmhead{\genhead U} - -% @chapter, @appendix, @unnumbered. Increment top-level counter, reset -% all lower-level sectioning counters to zero. -% -% Also set \chaplevelprefix, which we prepend to @float sequence numbers -% (e.g., figures), q.v. By default (before any chapter), that is empty. -\let\chaplevelprefix = \empty -% -\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz -\def\chapterzzz#1{% - % section resetting is \global in case the chapter is in a group, such - % as an @include file. - \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 - \global\advance\chapno by 1 - % - % Used for \float. - \gdef\chaplevelprefix{\the\chapno.}% - \resetallfloatnos - % - \message{\putwordChapter\space \the\chapno}% - % - % Write the actual heading. - \chapmacro{#1}{Ynumbered}{\the\chapno}% - % - % So @section and the like are numbered underneath this chapter. +\fi +\suppressfirstparagraphindent +} + +% @chapter, @appendix, @unnumbered. +\def\thischaptername{No Chapter Title} +\outer\def\chapter{\parsearg\chapteryyy} +\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz +\def\chapterzzz #1{% + \secno=0 \subsecno=0 \subsubsecno=0 + \global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}% + \chapmacro {#1}{\the\chapno}% + \gdef\thissection{#1}% + \gdef\thischaptername{#1}% + % We don't substitute the actual chapter name into \thischapter + % because we don't want its macros evaluated now. + \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}% + \writetocentry{chap}{#1}{{\the\chapno}} + \donoderef \global\let\section = \numberedsec \global\let\subsection = \numberedsubsec \global\let\subsubsection = \numberedsubsubsec } -\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz -\def\appendixzzz#1{% - \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 - \global\advance\appendixno by 1 - \gdef\chaplevelprefix{\appendixletter.}% - \resetallfloatnos - % - \def\appendixnum{\putwordAppendix\space \appendixletter}% - \message{\appendixnum}% - % - \chapmacro{#1}{Yappendix}{\appendixletter}% - % +% we use \chapno to avoid indenting back +\def\appendixbox#1{% + \setbox0 = \hbox{\putwordAppendix{} \the\chapno}% + \hbox to \wd0{#1\hss}} + +\outer\def\appendix{\parsearg\appendixyyy} +\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz +\def\appendixzzz #1{% + \secno=0 \subsecno=0 \subsubsecno=0 + \global\advance \appendixno by 1 + \message{\putwordAppendix\space \appendixletter}% + \chapmacro {#1}{\appendixbox{\putwordAppendix{} \appendixletter}}% + \gdef\thissection{#1}% + \gdef\thischaptername{#1}% + \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}% + \writetocentry{appendix}{#1}{{\appendixletter}} + \appendixnoderef \global\let\section = \appendixsec \global\let\subsection = \appendixsubsec \global\let\subsubsection = \appendixsubsubsec } -\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz -\def\unnumberedzzz#1{% - \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 - \global\advance\unnumberedno by 1 - % - % Since an unnumbered has no number, no prefix for figures. - \global\let\chaplevelprefix = \empty - \resetallfloatnos +% @centerchap is like @unnumbered, but the heading is centered. +\outer\def\centerchap{\parsearg\centerchapyyy} +\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}} + +% @top is like @unnumbered. +\outer\def\top{\parsearg\unnumberedyyy} + +\outer\def\unnumbered{\parsearg\unnumberedyyy} +\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz +\def\unnumberedzzz #1{% + \secno=0 \subsecno=0 \subsubsecno=0 % % This used to be simply \message{#1}, but TeX fully expands the % argument to \message. Therefore, if #1 contained @-commands, TeX @@ -4099,98 +3883,134 @@ where each line of input produces a line of output.} % \the<toks register> to achieve this: TeX expands \the<toks> only once, % simply yielding the contents of <toks register>. (We also do this for % the toc entries.) - \toks0 = {#1}% - \message{(\the\toks0)}% - % - \chapmacro{#1}{Ynothing}{\the\unnumberedno}% + \toks0 = {#1}\message{(\the\toks0)}% % + \unnumbchapmacro {#1}% + \gdef\thischapter{#1}\gdef\thissection{#1}% + \writetocentry{unnumbchap}{#1}{{\the\chapno}} + \unnumbnoderef \global\let\section = \unnumberedsec \global\let\subsection = \unnumberedsubsec \global\let\subsubsection = \unnumberedsubsubsec } -% @centerchap is like @unnumbered, but the heading is centered. -\outer\parseargdef\centerchap{% - % Well, we could do the following in a group, but that would break - % an assumption that \chapmacro is called at the outermost level. - % Thus we are safer this way: --kasal, 24feb04 - \let\centerparametersmaybe = \centerparameters - \unnmhead0{#1}% - \let\centerparametersmaybe = \relax -} - -% @top is like @unnumbered. -\let\top\unnumbered - % Sections. -\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz -\def\seczzz#1{% - \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 - \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}% +\outer\def\numberedsec{\parsearg\secyyy} +\def\secyyy #1{\numhead1{#1}} % normally calls seczzz +\def\seczzz #1{% + \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % + \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}% + \writetocentry{sec}{#1}{{\the\chapno}{\the\secno}} + \donoderef + \nobreak } -\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz -\def\appendixsectionzzz#1{% - \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 - \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}% +\outer\def\appendixsection{\parsearg\appendixsecyyy} +\outer\def\appendixsec{\parsearg\appendixsecyyy} +\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz +\def\appendixsectionzzz #1{% + \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % + \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}% + \writetocentry{sec}{#1}{{\appendixletter}{\the\secno}} + \appendixnoderef + \nobreak } -\let\appendixsec\appendixsection -\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz -\def\unnumberedseczzz#1{% - \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 - \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}% +\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy} +\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz +\def\unnumberedseczzz #1{% + \plainsecheading {#1}\gdef\thissection{#1}% + \writetocentry{unnumbsec}{#1}{{\the\chapno}{\the\secno}} + \unnumbnoderef + \nobreak } % Subsections. -\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz -\def\numberedsubseczzz#1{% - \global\subsubsecno=0 \global\advance\subsecno by 1 - \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}% +\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy} +\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz +\def\numberedsubseczzz #1{% + \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % + \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}% + \writetocentry{subsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}} + \donoderef + \nobreak } -\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz -\def\appendixsubseczzz#1{% - \global\subsubsecno=0 \global\advance\subsecno by 1 - \sectionheading{#1}{subsec}{Yappendix}% - {\appendixletter.\the\secno.\the\subsecno}% +\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy} +\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz +\def\appendixsubseczzz #1{% + \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % + \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}% + \writetocentry{subsec}{#1}{{\appendixletter}{\the\secno}{\the\subsecno}} + \appendixnoderef + \nobreak } -\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz -\def\unnumberedsubseczzz#1{% - \global\subsubsecno=0 \global\advance\subsecno by 1 - \sectionheading{#1}{subsec}{Ynothing}% - {\the\unnumberedno.\the\secno.\the\subsecno}% +\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy} +\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz +\def\unnumberedsubseczzz #1{% + \plainsubsecheading {#1}\gdef\thissection{#1}% + \writetocentry{unnumbsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}} + \unnumbnoderef + \nobreak } % Subsubsections. -\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz -\def\numberedsubsubseczzz#1{% - \global\advance\subsubsecno by 1 - \sectionheading{#1}{subsubsec}{Ynumbered}% - {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}% +\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy} +\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz +\def\numberedsubsubseczzz #1{% + \gdef\thissection{#1}\global\advance \subsubsecno by 1 % + \subsubsecheading {#1} + {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}% + \writetocentry{subsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}} + \donoderef + \nobreak } -\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz -\def\appendixsubsubseczzz#1{% - \global\advance\subsubsecno by 1 - \sectionheading{#1}{subsubsec}{Yappendix}% - {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}% +\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy} +\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz +\def\appendixsubsubseczzz #1{% + \gdef\thissection{#1}\global\advance \subsubsecno by 1 % + \subsubsecheading {#1} + {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}% + \writetocentry{subsubsec}{#1}{{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}} + \appendixnoderef + \nobreak } -\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz -\def\unnumberedsubsubseczzz#1{% - \global\advance\subsubsecno by 1 - \sectionheading{#1}{subsubsec}{Ynothing}% - {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}% +\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy} +\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz +\def\unnumberedsubsubseczzz #1{% + \plainsubsubsecheading {#1}\gdef\thissection{#1}% + \writetocentry{unnumbsubsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}} + \unnumbnoderef + \nobreak } +% These are variants which are not "outer", so they can appear in @ifinfo. +% Actually, they should now be obsolete; ordinary section commands should work. +\def\infotop{\parsearg\unnumberedzzz} +\def\infounnumbered{\parsearg\unnumberedzzz} +\def\infounnumberedsec{\parsearg\unnumberedseczzz} +\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz} +\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz} + +\def\infoappendix{\parsearg\appendixzzz} +\def\infoappendixsec{\parsearg\appendixseczzz} +\def\infoappendixsubsec{\parsearg\appendixsubseczzz} +\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz} + +\def\infochapter{\parsearg\chapterzzz} +\def\infosection{\parsearg\sectionzzz} +\def\infosubsection{\parsearg\subsectionzzz} +\def\infosubsubsection{\parsearg\subsubsectionzzz} + % These macros control what the section commands do, according % to what kind of chapter we are in (ordinary, appendix, or unnumbered). % Define them by default for a numbered chapter. -\let\section = \numberedsec -\let\subsection = \numberedsubsec -\let\subsubsection = \numberedsubsubsec +\global\let\section = \numberedsec +\global\let\subsection = \numberedsubsec +\global\let\subsubsection = \numberedsubsubsec % Define @majorheading, @heading and @subheading @@ -4203,27 +4023,23 @@ where each line of input produces a line of output.} % if justification is not attempted. Hence \raggedright. -\def\majorheading{% +\def\majorheading{\parsearg\majorheadingzzz} +\def\majorheadingzzz #1{% {\advance\chapheadingskip by 10pt \chapbreak }% - \parsearg\chapheadingzzz -} + {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\raggedright + \rm #1\hfill}}\bigskip \par\penalty 200} -\def\chapheading{\chapbreak \parsearg\chapheadingzzz} -\def\chapheadingzzz#1{% +\def\chapheading{\parsearg\chapheadingzzz} +\def\chapheadingzzz #1{\chapbreak % {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt\raggedright - \rm #1\hfill}}% - \bigskip \par\penalty 200\relax - \suppressfirstparagraphindent -} + \rm #1\hfill}}\bigskip \par\penalty 200} % @heading, @subheading, @subsubheading. -\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{} - \suppressfirstparagraphindent} -\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{} - \suppressfirstparagraphindent} -\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{} - \suppressfirstparagraphindent} +\def\heading{\parsearg\plainsecheading} +\def\subheading{\parsearg\plainsubsecheading} +\def\subsubheading{\parsearg\plainsubsubsecheading} % These macros generate a chapter, section, etc. heading only % (including whitespace, linebreaking, etc. around it), @@ -4232,6 +4048,8 @@ where each line of input produces a line of output.} %%% Args are the skip and penalty (usually negative) \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} +\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} + %%% Define plain chapter starts, and page on/off switching for it % Parameter controlling skip before chapter headings (if needed) @@ -4254,7 +4072,7 @@ where each line of input produces a line of output.} \global\let\pagealignmacro=\chappager \global\def\HEADINGSon{\HEADINGSsingle}} -\def\CHAPPAGodd{% +\def\CHAPPAGodd{ \global\let\contentsalignmacro = \chapoddpage \global\let\pchapsepmacro=\chapoddpage \global\let\pagealignmacro=\chapoddpage @@ -4262,193 +4080,116 @@ where each line of input produces a line of output.} \CHAPPAGon -% Chapter opening. -% -% #1 is the text, #2 is the section type (Ynumbered, Ynothing, -% Yappendix, Yomitfromtoc), #3 the chapter number. -% -% To test against our argument. -\def\Ynothingkeyword{Ynothing} -\def\Yomitfromtockeyword{Yomitfromtoc} -\def\Yappendixkeyword{Yappendix} -% -\def\chapmacro#1#2#3{% +\def\CHAPFplain{ +\global\let\chapmacro=\chfplain +\global\let\unnumbchapmacro=\unnchfplain +\global\let\centerchapmacro=\centerchfplain} + +% Plain chapter opening. +% #1 is the text, #2 the chapter number or empty if unnumbered. +\def\chfplain#1#2{% \pchapsepmacro {% \chapfonts \rm - % - % Have to define \thissection before calling \donoderef, because the - % xref code eventually uses it. On the other hand, it has to be called - % after \pchapsepmacro, or the headline will change too soon. - \gdef\thissection{#1}% - \gdef\thischaptername{#1}% - % - % Only insert the separating space if we have a chapter/appendix - % number, and don't print the unnumbered ``number''. - \def\temptype{#2}% - \ifx\temptype\Ynothingkeyword - \setbox0 = \hbox{}% - \def\toctype{unnchap}% - \def\thischapter{#1}% - \else\ifx\temptype\Yomitfromtockeyword - \setbox0 = \hbox{}% contents like unnumbered, but no toc entry - \def\toctype{omit}% - \xdef\thischapter{}% - \else\ifx\temptype\Yappendixkeyword - \setbox0 = \hbox{\putwordAppendix{} #3\enspace}% - \def\toctype{app}% - % We don't substitute the actual chapter name into \thischapter - % because we don't want its macros evaluated now. And we don't - % use \thissection because that changes with each section. - % - \xdef\thischapter{\putwordAppendix{} \appendixletter: - \noexpand\thischaptername}% - \else - \setbox0 = \hbox{#3\enspace}% - \def\toctype{numchap}% - \xdef\thischapter{\putwordChapter{} \the\chapno: - \noexpand\thischaptername}% - \fi\fi\fi - % - % Write the toc entry for this chapter. Must come before the - % \donoderef, because we include the current node name in the toc - % entry, and \donoderef resets it to empty. - \writetocentry{\toctype}{#1}{#3}% - % - % For pdftex, we have to write out the node definition (aka, make - % the pdfdest) after any page break, but before the actual text has - % been typeset. If the destination for the pdf outline is after the - % text, then jumping from the outline may wind up with the text not - % being visible, for instance under high magnification. - \donoderef{#2}% - % - % Typeset the actual heading. + \def\chapnum{#2}% + \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}% \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright - \hangindent=\wd0 \centerparametersmaybe + \hangindent = \wd0 \centerparametersmaybe \unhbox0 #1\par}% }% \nobreak\bigskip % no page break after a chapter title \nobreak } +% Plain opening for unnumbered. +\def\unnchfplain#1{\chfplain{#1}{}} + % @centerchap -- centered and unnumbered. \let\centerparametersmaybe = \relax -\def\centerparameters{% - \advance\rightskip by 3\rightskip - \leftskip = \rightskip - \parfillskip = 0pt -} +\def\centerchfplain#1{{% + \def\centerparametersmaybe{% + \advance\rightskip by 3\rightskip + \leftskip = \rightskip + \parfillskip = 0pt + }% + \chfplain{#1}{}% +}} +\CHAPFplain % The default -% I don't think this chapter style is supported any more, so I'm not -% updating it with the new noderef stuff. We'll see. --karl, 11aug03. -% -\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} -% \def\unnchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt\raggedright \rm #1\hfill}}\bigskip \par\nobreak } + \def\chfopen #1#2{\chapoddpage {\chapfonts \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% \par\penalty 5000 % } + \def\centerchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt \hfill {\rm #1}\hfill}}\bigskip \par\nobreak } -\def\CHAPFopen{% - \global\let\chapmacro=\chfopen - \global\let\centerchapmacro=\centerchfopen} +\def\CHAPFopen{ +\global\let\chapmacro=\chfopen +\global\let\unnumbchapmacro=\unnchfopen +\global\let\centerchapmacro=\centerchfopen} -% Section titles. These macros combine the section number parts and -% call the generic \sectionheading to do the printing. -% + +% Section titles. \newskip\secheadingskip -\def\secheadingbreak{\dobreak \secheadingskip{-1000}} +\def\secheadingbreak{\dobreak \secheadingskip {-1000}} +\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}} +\def\plainsecheading#1{\sectionheading{sec}{}{#1}} % Subsection titles. -\newskip\subsecheadingskip -\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}} +\newskip \subsecheadingskip +\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}} +\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}} +\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}} % Subsubsection titles. -\def\subsubsecheadingskip{\subsecheadingskip} -\def\subsubsecheadingbreak{\subsecheadingbreak} +\let\subsubsecheadingskip = \subsecheadingskip +\let\subsubsecheadingbreak = \subsecheadingbreak +\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}} +\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}} -% Print any size, any type, section title. +% Print any size section title. % -% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is -% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the -% section number. -% -\def\sectionheading#1#2#3#4{% +% #1 is the section type (sec/subsec/subsubsec), #2 is the section +% number (maybe empty), #3 the text. +\def\sectionheading#1#2#3{% + {% + \expandafter\advance\csname #1headingskip\endcsname by \parskip + \csname #1headingbreak\endcsname + }% {% % Switch to the right set of fonts. - \csname #2fonts\endcsname \rm - % - % Insert space above the heading. - \csname #2headingbreak\endcsname - % - % Only insert the space after the number if we have a section number. - \def\sectionlevel{#2}% - \def\temptype{#3}% - % - \ifx\temptype\Ynothingkeyword - \setbox0 = \hbox{}% - \def\toctype{unn}% - \gdef\thissection{#1}% - \else\ifx\temptype\Yomitfromtockeyword - % for @headings -- no section number, don't include in toc, - % and don't redefine \thissection. - \setbox0 = \hbox{}% - \def\toctype{omit}% - \let\sectionlevel=\empty - \else\ifx\temptype\Yappendixkeyword - \setbox0 = \hbox{#4\enspace}% - \def\toctype{app}% - \gdef\thissection{#1}% - \else - \setbox0 = \hbox{#4\enspace}% - \def\toctype{num}% - \gdef\thissection{#1}% - \fi\fi\fi + \csname #1fonts\endcsname \rm % - % Write the toc entry (before \donoderef). See comments in \chfplain. - \writetocentry{\toctype\sectionlevel}{#1}{#4}% + % Only insert the separating space if we have a section number. + \def\secnum{#2}% + \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}% % - % Write the node reference (= pdf destination for pdftex). - % Again, see comments in \chfplain. - \donoderef{#3}% - % - % Output the actual section heading. \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright - \hangindent=\wd0 % zero if no section number - \unhbox0 #1}% + \hangindent = \wd0 % zero if no section number + \unhbox0 #3}% }% - % Add extra space after the heading -- half of whatever came above it. - % Don't allow stretch, though. - \kern .5 \csname #2headingskip\endcsname - % - % Do not let the kern be a potential breakpoint, as it would be if it - % was followed by glue. + % Add extra space after the heading -- either a line space or a + % paragraph space, whichever is more. (Some people like to set + % \parskip to large values for some reason.) Don't allow stretch, though. + \nobreak + \ifdim\parskip>\normalbaselineskip + \kern\parskip + \else + \kern\normalbaselineskip + \fi \nobreak - % - % We'll almost certainly start a paragraph next, so don't let that - % glue accumulate. (Not a breakpoint because it's preceded by a - % discardable item.) - \vskip-\parskip - % - % This is purely so the last item on the list is a known \penalty > - % 10000. This is so \startdefun can avoid allowing breakpoints after - % section headings. Otherwise, it would insert a valid breakpoint between: - % - % @section sec-whatever - % @deffn def-whatever - \penalty 10001 } @@ -4457,152 +4198,119 @@ where each line of input produces a line of output.} \newwrite\tocfile % Write an entry to the toc file, opening it if necessary. -% Called from @chapter, etc. -% -% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno} -% We append the current node name (if any) and page number as additional -% arguments for the \{chap,sec,...}entry macros which will eventually -% read this. The node name is used in the pdf outlines as the -% destination to jump to. +% Called from @chapter, etc. We supply {\folio} at the end of the +% argument, which will end up as the last argument to the \...entry macro. % +% Usage: \writetocentry{chap}{The Name of The Game}{{\the\chapno}} % We open the .toc file for writing here instead of at @setfilename (or % any other fixed time) so that @contents can be anywhere in the document. -% But if #1 is `omit', then we don't do anything. This is used for the -% table of contents chapter openings themselves. % \newif\iftocfileopened -\def\omitkeyword{omit}% -% \def\writetocentry#1#2#3{% - \edef\writetoctype{#1}% - \ifx\writetoctype\omitkeyword \else - \iftocfileopened\else - \immediate\openout\tocfile = \jobname.toc - \global\tocfileopenedtrue - \fi - % - \iflinks - \toks0 = {#2}% - \toks2 = \expandafter{\lastnode}% - \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}% - {\the\toks2}{\noexpand\folio}}}% - \temp - \fi + \iftocfileopened\else + \immediate\openout\tocfile = \jobname.toc + \global\tocfileopenedtrue \fi % - % Tell \shipout to create a pdf destination on each page, if we're - % writing pdf. These are used in the table of contents. We can't - % just write one on every page because the title pages are numbered - % 1 and 2 (the page numbers aren't printed), and so are the first - % two pages of the document. Thus, we'd have two destinations named - % `1', and two named `2'. - \ifpdf \global\pdfmakepagedesttrue \fi + \iflinks + \toks0 = {#2}% + \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}#3{\folio}}}% + \temp + \fi + % + % Tell \shipout to create a page destination if we're doing pdf, which + % will be the target of the links in the table of contents. We can't + % just do it on every page because the title pages are numbered 1 and + % 2 (the page numbers aren't printed), and so are the first two pages + % of the document. Thus, we'd have two destinations named `1', and + % two named `2'. + \ifpdf \pdfmakepagedesttrue \fi } \newskip\contentsrightmargin \contentsrightmargin=1in \newcount\savepageno \newcount\lastnegativepageno \lastnegativepageno = -1 -% Prepare to read what we've written to \tocfile. +% Finish up the main text and prepare to read what we've written +% to \tocfile. % \def\startcontents#1{% - % If @setchapternewpage on, and @headings double, the contents should - % start on an odd page, unlike chapters. Thus, we maintain - % \contentsalignmacro in parallel with \pagealignmacro. - % From: Torbjorn Granlund <tege@matematik.su.se> - \contentsalignmacro - \immediate\closeout\tocfile - % - % Don't need to put `Contents' or `Short Contents' in the headline. - % It is abundantly clear what they are. - \def\thischapter{}% - \chapmacro{#1}{Yomitfromtoc}{}% - % - \savepageno = \pageno - \begingroup % Set up to handle contents files properly. - \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 - % We can't do this, because then an actual ^ in a section - % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97. - %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi - \raggedbottom % Worry more about breakpoints than the bottom. - \advance\hsize by -\contentsrightmargin % Don't use the full line length. - % - % Roman numerals for page numbers. - \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi + % If @setchapternewpage on, and @headings double, the contents should + % start on an odd page, unlike chapters. Thus, we maintain + % \contentsalignmacro in parallel with \pagealignmacro. + % From: Torbjorn Granlund <tege@matematik.su.se> + \contentsalignmacro + \immediate\closeout\tocfile + % + % Don't need to put `Contents' or `Short Contents' in the headline. + % It is abundantly clear what they are. + \unnumbchapmacro{#1}\def\thischapter{}% + \savepageno = \pageno + \begingroup % Set up to handle contents files properly. + \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 + % We can't do this, because then an actual ^ in a section + % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97. + %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi + \raggedbottom % Worry more about breakpoints than the bottom. + \advance\hsize by -\contentsrightmargin % Don't use the full line length. + % + % Roman numerals for page numbers. + \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi } % Normal (long) toc. \def\contents{% - \startcontents{\putwordTOC}% - \openin 1 \jobname.toc - \ifeof 1 \else - \input \jobname.toc - \fi - \vfill \eject - \contentsalignmacro % in case @setchapternewpage odd is in effect - \ifeof 1 \else - \pdfmakeoutlines - \fi - \closein 1 - \endgroup - \lastnegativepageno = \pageno - \global\pageno = \savepageno + \startcontents{\putwordTOC}% + \openin 1 \jobname.toc + \ifeof 1 \else + \closein 1 + \input \jobname.toc + \fi + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \pdfmakeoutlines + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno } % And just the chapters. \def\summarycontents{% - \startcontents{\putwordShortTOC}% - % - \let\numchapentry = \shortchapentry - \let\appentry = \shortchapentry - \let\unnchapentry = \shortunnchapentry - % We want a true roman here for the page numbers. - \secfonts - \let\rm=\shortcontrm \let\bf=\shortcontbf - \let\sl=\shortcontsl \let\tt=\shortconttt - \rm - \hyphenpenalty = 10000 - \advance\baselineskip by 1pt % Open it up a little. - \def\numsecentry##1##2##3##4{} - \let\appsecentry = \numsecentry - \let\unnsecentry = \numsecentry - \let\numsubsecentry = \numsecentry - \let\appsubsecentry = \numsecentry - \let\unnsubsecentry = \numsecentry - \let\numsubsubsecentry = \numsecentry - \let\appsubsubsecentry = \numsecentry - \let\unnsubsubsecentry = \numsecentry - \openin 1 \jobname.toc - \ifeof 1 \else - \input \jobname.toc - \fi - \closein 1 - \vfill \eject - \contentsalignmacro % in case @setchapternewpage odd is in effect - \endgroup - \lastnegativepageno = \pageno - \global\pageno = \savepageno + \startcontents{\putwordShortTOC}% + % + \let\chapentry = \shortchapentry + \let\appendixentry = \shortappendixentry + \let\unnumbchapentry = \shortunnumberedentry + % We want a true roman here for the page numbers. + \secfonts + \let\rm=\shortcontrm \let\bf=\shortcontbf + \let\sl=\shortcontsl \let\tt=\shortconttt + \rm + \hyphenpenalty = 10000 + \advance\baselineskip by 1pt % Open it up a little. + \def\secentry ##1##2##3##4{} + \def\subsecentry ##1##2##3##4##5{} + \def\subsubsecentry ##1##2##3##4##5##6{} + \let\unnumbsecentry = \secentry + \let\unnumbsubsecentry = \subsecentry + \let\unnumbsubsubsecentry = \subsubsecentry + \openin 1 \jobname.toc + \ifeof 1 \else + \closein 1 + \input \jobname.toc + \fi + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno } \let\shortcontents = \summarycontents -% Typeset the label for a chapter or appendix for the short contents. -% The arg is, e.g., `A' for an appendix, or `3' for a chapter. -% -\def\shortchaplabel#1{% - % This space should be enough, since a single number is .5em, and the - % widest letter (M) is 1em, at least in the Computer Modern fonts. - % But use \hss just in case. - % (This space doesn't include the extra space that gets added after - % the label; that gets put in by \shortchapentry above.) - % - % We'd like to right-justify chapter numbers, but that looks strange - % with appendix letters. And right-justifying numbers and - % left-justifying letters looks strange when there is less than 10 - % chapters. Have to read the whole toc once to know how many chapters - % there are before deciding ... - \hbox to 1em{#1\hss}% -} +\ifpdf + \pdfcatalog{/PageMode /UseOutlines}% +\fi % These macros generate individual entries in the table of contents. % The first argument is the chapter or section name. @@ -4610,46 +4318,58 @@ where each line of input produces a line of output.} % The arguments in between are the chapter number, section number, ... % Chapters, in the main contents. -\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}} +\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}} % % Chapters, in the short toc. % See comments in \dochapentry re vbox and related settings. -\def\shortchapentry#1#2#3#4{% - \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}% +\def\shortchapentry#1#2#3{% + \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}% } % Appendices, in the main contents. -% Need the word Appendix, and a fixed-size box. +\def\appendixentry#1#2#3{% + \dochapentry{\appendixbox{\putwordAppendix{} #2}\labelspace#1}{#3}} % -\def\appendixbox#1{% - % We use M since it's probably the widest letter. - \setbox0 = \hbox{\putwordAppendix{} M}% - \hbox to \wd0{\putwordAppendix{} #1\hss}} +% Appendices, in the short toc. +\let\shortappendixentry = \shortchapentry + +% Typeset the label for a chapter or appendix for the short contents. +% The arg is, e.g., `Appendix A' for an appendix, or `3' for a chapter. +% We could simplify the code here by writing out an \appendixentry +% command in the toc file for appendices, instead of using \chapentry +% for both, but it doesn't seem worth it. % -\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}} +\newdimen\shortappendixwidth +% +\def\shortchaplabel#1{% + % This space should be enough, since a single number is .5em, and the + % widest letter (M) is 1em, at least in the Computer Modern fonts. + % But use \hss just in case. + % (This space doesn't include the extra space that gets added after + % the label; that gets put in by \shortchapentry above.) + \dimen0 = 1em + \hbox to \dimen0{#1\hss}% +} % Unnumbered chapters. -\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}} -\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}} +\def\unnumbchapentry#1#2#3{\dochapentry{#1}{#3}} +\def\shortunnumberedentry#1#2#3{\tocentry{#1}{\doshortpageno\bgroup#3\egroup}} % Sections. -\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}} -\let\appsecentry=\numsecentry -\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}} +\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}} +\def\unnumbsecentry#1#2#3#4{\dosecentry{#1}{#4}} % Subsections. -\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}} -\let\appsubsecentry=\numsubsecentry -\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}} +\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}} +\def\unnumbsubsecentry#1#2#3#4#5{\dosubsecentry{#1}{#5}} % And subsubsections. -\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}} -\let\appsubsubsecentry=\numsubsubsecentry -\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}} +\def\subsubsecentry#1#2#3#4#5#6{% + \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}} +\def\unnumbsubsubsecentry#1#2#3#4#5#6{\dosubsubsecentry{#1}{#6}} % This parameter controls the indentation of the various levels. -% Same as \defaultparindent. -\newdimen\tocindent \tocindent = 15pt +\newdimen\tocindent \tocindent = 3pc % Now for the actual typesetting. In all these, #1 is the text and #2 is the % page number. @@ -4680,8 +4400,17 @@ where each line of input produces a line of output.} \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup} -% We use the same \entry macro as for the index entries. -\let\tocentry = \entry +% Final typesetting of a toc entry; we use the same \entry macro as for +% the index entries, but we want to suppress hyphenation here. (We +% can't do that in the \entry macro, since index entries might consist +% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.) +\def\tocentry#1#2{\begingroup + \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks + % Do not use \turnoffactive in these arguments. Since the toc is + % typeset in cmr, characters such as _ would come out wrong; we + % have to do the usual translation tricks. + \entry{#1}{#2}% +\endgroup} % Space between chapter (or whatever) number and the title. \def\labelspace{\hskip1em \relax} @@ -4691,8 +4420,8 @@ where each line of input produces a line of output.} \def\chapentryfonts{\secfonts \rm} \def\secentryfonts{\textfonts} -\def\subsecentryfonts{\textfonts} -\def\subsubsecentryfonts{\textfonts} +\let\subsecentryfonts = \textfonts +\let\subsubsecentryfonts = \textfonts \message{environments,} @@ -4719,10 +4448,10 @@ where each line of input produces a line of output.} % The text. (`r' is open on the right, `e' somewhat less so on the left.) \setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt} % -\setbox\errorbox=\hbox to \dimen0{\hfil +\global\setbox\errorbox=\hbox to \dimen0{\hfil \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. \advance\hsize by -2\dimen2 % Rules. - \vbox{% + \vbox{ \hrule height\dimen2 \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. @@ -4736,13 +4465,14 @@ where each line of input produces a line of output.} % One exception: @ is still an escape character, so that @end tex works. % But \@ or @@ will get a plain tex @ character. -\envdef\tex{% +\def\tex{\begingroup \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie \catcode `\%=14 \catcode `\+=\other \catcode `\"=\other + \catcode `\==\other \catcode `\|=\other \catcode `\<=\other \catcode `\>=\other @@ -4758,7 +4488,6 @@ where each line of input produces a line of output.} \let\!=\ptexexclam \let\i=\ptexi \let\indent=\ptexindent - \let\noindent=\ptexnoindent \let\{=\ptexlbrace \let\+=\tabalign \let\}=\ptexrbrace @@ -4769,11 +4498,10 @@ where each line of input produces a line of output.} \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% \def\@{@}% -} -% There is no need to define \Etex. +\let\Etex=\endgroup} % Define @lisp ... @end lisp. -% @lisp environment forms a group so it can rebind things, +% @lisp does a \begingroup so it can rebind things, % including the definition of @end lisp (which normally is erroneous). % Amount to narrow the margins by for @lisp. @@ -4784,6 +4512,19 @@ where each line of input produces a line of output.} % have any width. \def\lisppar{\null\endgraf} +% Make each space character in the input produce a normal interword +% space in the output. Don't allow a line break at this space, as this +% is used only in environments like @example, where each line of input +% should produce a line of output anyway. +% +{\obeyspaces % +\gdef\sepspaces{\obeyspaces\let =\tie}} + +% Define \obeyedspace to be our active space, whatever it is. This is +% for use in \parsearg. +{\sepspaces% +\global\let\obeyedspace= } + % This space is always present above and below environments. \newskip\envskipamount \envskipamount = 0pt @@ -4793,8 +4534,7 @@ where each line of input produces a line of output.} % start of the next paragraph will insert \parskip. % \def\aboveenvbreak{{% - % =10000 instead of <10000 because of a special case in \itemzzz and - % \sectionheading, q.v. + % =10000 instead of <10000 because of a special case in \itemzzz, q.v. \ifnum \lastpenalty=10000 \else \advance\envskipamount by \parskip \endgraf @@ -4802,7 +4542,7 @@ where each line of input produces a line of output.} \removelastskip % it's not a good place to break if the last penalty was \nobreak % or better ... - \ifnum\lastpenalty<10000 \penalty-50 \fi + \ifnum\lastpenalty>10000 \else \penalty-50 \fi \vskip\envskipamount \fi \fi @@ -4834,52 +4574,52 @@ where each line of input produces a line of output.} % \newskip\lskip\newskip\rskip -\envdef\cartouche{% - \ifhmode\par\fi % can't be in the midst of a paragraph. - \startsavinginserts - \lskip=\leftskip \rskip=\rightskip - \leftskip=0pt\rightskip=0pt % we want these *outside*. - \cartinner=\hsize \advance\cartinner by-\lskip - \advance\cartinner by-\rskip - \cartouter=\hsize - \advance\cartouter by 18.4pt % allow for 3pt kerns on either - % side, and for 6pt waste from - % each corner char, and rule thickness - \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip - % Flag to tell @lisp, etc., not to narrow margin. - \let\nonarrowing=\comment - \vbox\bgroup - \baselineskip=0pt\parskip=0pt\lineskip=0pt - \carttop - \hbox\bgroup - \hskip\lskip - \vrule\kern3pt - \vbox\bgroup - \kern3pt - \hsize=\cartinner - \baselineskip=\normbskip - \lineskip=\normlskip - \parskip=\normpskip - \vskip -\parskip - \comment % For explanation, see the end of \def\group. -} +\def\cartouche{% +\par % can't be in the midst of a paragraph. +\begingroup + \lskip=\leftskip \rskip=\rightskip + \leftskip=0pt\rightskip=0pt %we want these *outside*. + \cartinner=\hsize \advance\cartinner by-\lskip + \advance\cartinner by-\rskip + \cartouter=\hsize + \advance\cartouter by 18.4pt % allow for 3pt kerns on either +% side, and for 6pt waste from +% each corner char, and rule thickness + \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip + % Flag to tell @lisp, etc., not to narrow margin. + \let\nonarrowing=\comment + \vbox\bgroup + \baselineskip=0pt\parskip=0pt\lineskip=0pt + \carttop + \hbox\bgroup + \hskip\lskip + \vrule\kern3pt + \vbox\bgroup + \hsize=\cartinner + \kern3pt + \begingroup + \baselineskip=\normbskip + \lineskip=\normlskip + \parskip=\normpskip + \vskip -\parskip \def\Ecartouche{% - \ifhmode\par\fi - \kern3pt - \egroup - \kern3pt\vrule - \hskip\rskip - \egroup - \cartbot - \egroup - \checkinserts -} + \endgroup + \kern3pt + \egroup + \kern3pt\vrule + \hskip\rskip + \egroup + \cartbot + \egroup +\endgroup +}} % This macro is called at the beginning of all the @example variants, % inside a group. \def\nonfillstart{% \aboveenvbreak + \inENV % This group ends at the end of the body \hfuzz = 12pt % Don't be fussy \sepspaces % Make spaces be word-separators rather than space tokens. \let\par = \lisppar % don't ignore blank lines @@ -4892,99 +4632,103 @@ where each line of input produces a line of output.} \ifx\nonarrowing\relax \advance \leftskip by \lispnarrowing \exdentamount=\lispnarrowing + \let\exdent=\nofillexdent + \let\nonarrowing=\relax \fi - \let\exdent=\nofillexdent } -% If you want all examples etc. small: @set dispenvsize small. -% If you want even small examples the full size: @set dispenvsize nosmall. -% This affects the following displayed environments: -% @example, @display, @format, @lisp +% Define the \E... control sequence only if we are inside the particular +% environment, so the error checking in \end will work. % -\def\smallword{small} -\def\nosmallword{nosmall} -\let\SETdispenvsize\relax -\def\setnormaldispenv{% - \ifx\SETdispenvsize\smallword - \smallexamplefonts \rm - \fi -} -\def\setsmalldispenv{% - \ifx\SETdispenvsize\nosmallword - \else - \smallexamplefonts \rm - \fi -} +% To end an @example-like environment, we first end the paragraph (via +% \afterenvbreak's vertical glue), and then the group. That way we keep +% the zero \parskip that the environments set -- \parskip glue will be +% inserted at the beginning of the next paragraph in the document, after +% the environment. +% +\def\nonfillfinish{\afterenvbreak\endgroup} -% We often define two environments, @foo and @smallfoo. -% Let's do it by one command: -\def\makedispenv #1#2{ - \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2} - \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2} - \expandafter\let\csname E#1\endcsname \afterenvbreak - \expandafter\let\csname Esmall#1\endcsname \afterenvbreak +% @lisp: indented, narrowed, typewriter font. +\def\lisp{\begingroup + \nonfillstart + \let\Elisp = \nonfillfinish + \tt + \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. + \gobble % eat return } -% Define two synonyms: -\def\maketwodispenvs #1#2#3{ - \makedispenv{#1}{#3} - \makedispenv{#2}{#3} -} +% @example: Same as @lisp. +\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp} -% @lisp: indented, narrowed, typewriter font; @example: same as @lisp. -% % @smallexample and @smalllisp: use smaller fonts. % Originally contributed by Pavel@xerox. -% -\maketwodispenvs {lisp}{example}{% - \nonfillstart - \tt - \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. - \gobble % eat return +\def\smalllisp{\begingroup + \def\Esmalllisp{\nonfillfinish\endgroup}% + \def\Esmallexample{\nonfillfinish\endgroup}% + \smallexamplefonts + \lisp } +\let\smallexample = \smalllisp -% @display/@smalldisplay: same as @lisp except keep current font. + +% @display: same as @lisp except keep current font. % -\makedispenv {display}{% +\def\display{\begingroup \nonfillstart + \let\Edisplay = \nonfillfinish \gobble } - -% @format/@smallformat: same as @display except don't narrow margins. % -\makedispenv{format}{% - \let\nonarrowing = t% - \nonfillstart - \gobble +% @smalldisplay: @display plus smaller fonts. +% +\def\smalldisplay{\begingroup + \def\Esmalldisplay{\nonfillfinish\endgroup}% + \smallexamplefonts \rm + \display } -% @flushleft: same as @format, but doesn't obey \SETdispenvsize. -\envdef\flushleft{% - \let\nonarrowing = t% +% @format: same as @display except don't narrow margins. +% +\def\format{\begingroup + \let\nonarrowing = t \nonfillstart + \let\Eformat = \nonfillfinish \gobble } -\let\Eflushleft = \afterenvbreak +% +% @smallformat: @format plus smaller fonts. +% +\def\smallformat{\begingroup + \def\Esmallformat{\nonfillfinish\endgroup}% + \smallexamplefonts \rm + \format +} + +% @flushleft (same as @format). +% +\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format} % @flushright. % -\envdef\flushright{% - \let\nonarrowing = t% +\def\flushright{\begingroup + \let\nonarrowing = t \nonfillstart + \let\Eflushright = \nonfillfinish \advance\leftskip by 0pt plus 1fill \gobble } -\let\Eflushright = \afterenvbreak % @quotation does normal linebreaking (hence we can't use \nonfillstart) -% and narrows the margins. We keep \parskip nonzero in general, since -% we're doing normal filling. So, when using \aboveenvbreak and -% \afterenvbreak, temporarily make \parskip 0. +% and narrows the margins. % -\envdef\quotation{% +\def\quotation{% + \begingroup\inENV %This group ends at the end of the @quotation body {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip \parindent=0pt + % We have retained a nonzero parskip for the environment, since we're + % doing normal filling. So to avoid extra space below the environment... + \def\Equotation{\parskip = 0pt \nonfillfinish}% % % @cartouche defines \nonarrowing to inhibit narrowing at next level down. \ifx\nonarrowing\relax @@ -4993,27 +4737,6 @@ where each line of input produces a line of output.} \exdentamount = \lispnarrowing \let\nonarrowing = \relax \fi - \parsearg\quotationlabel -} - -% We have retained a nonzero parskip for the environment, since we're -% doing normal filling. -% -\def\Equotation{% - \par - \ifx\quotationauthor\undefined\else - % indent a bit. - \leftline{\kern 2\leftskip \sl ---\quotationauthor}% - \fi - {\parskip=0pt \afterenvbreak}% -} - -% If we're given an argument, typeset it in bold with a colon after. -\def\quotationlabel#1{% - \def\temp{#1}% - \ifx\temp\empty \else - {\bf #1: }% - \fi } @@ -5035,7 +4758,7 @@ where each line of input produces a line of output.} % % [Knuth] p. 380 \def\uncatcodespecials{% - \def\do##1{\catcode`##1=\other}\dospecials} + \def\do##1{\catcode`##1=12}\dospecials} % % [Knuth] pp. 380,381,391 % Disable Spanish ligatures ?` and !` of \tt font @@ -5083,8 +4806,6 @@ where each line of input produces a line of output.} } \endgroup \def\setupverbatim{% - \nonfillstart - \advance\leftskip by -\defbodyindent % Easiest (and conventionally used) font for verbatim \tt \def\par{\leavevmode\egroup\box0\endgraf}% @@ -5106,7 +4827,7 @@ where each line of input produces a line of output.} % % [Knuth] p. 382; only eat outer {} \begingroup - \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other + \catcode`[=1\catcode`]=2\catcode`\{=12\catcode`\}=12 \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next] \endgroup % @@ -5123,6 +4844,13 @@ where each line of input produces a line of output.} % we need not redefine '\', '{' and '}'. % % Inspired by LaTeX's verbatim command set [latex.ltx] +%% Include LaTeX hack for completeness -- never know +%% \begingroup +%% \catcode`|=0 \catcode`[=1 +%% \catcode`]=2\catcode`\{=12\catcode`\}=12\catcode`\ =\active +%% \catcode`\\=12|gdef|doverbatim#1@end verbatim[ +%% #1|endgroup|def|Everbatim[]|end[verbatim]] +%% |endgroup % \begingroup \catcode`\ =\active @@ -5130,32 +4858,54 @@ where each line of input produces a line of output.} % ignore everything up to the first ^^M, that's the newline at the end % of the @verbatim input line itself. Otherwise we get an extra blank % line in the output. - \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}% - % We really want {...\end verbatim} in the body of the macro, but - % without the active space; thus we have to use \xdef and \gobble. + \gdef\doverbatim#1^^M#2@end verbatim{#2\end{verbatim}}% \endgroup % -\envdef\verbatim{% - \setupverbatim\doverbatim +\def\verbatim{% + \def\Everbatim{\nonfillfinish\endgroup}% + \begingroup + \nonfillstart + \advance\leftskip by -\defbodyindent + \begingroup\setupverbatim\doverbatim } -\let\Everbatim = \afterenvbreak - % @verbatiminclude FILE - insert text of file in verbatim environment. % -\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude} +% Allow normal characters that we make active in the argument (a file name). +\def\verbatiminclude{% + \begingroup + \catcode`\\=\other + \catcode`~=\other + \catcode`^=\other + \catcode`_=\other + \catcode`|=\other + \catcode`<=\other + \catcode`>=\other + \catcode`+=\other + \parsearg\doverbatiminclude +} +\def\setupverbatiminclude{% + \begingroup + \nonfillstart + \advance\leftskip by -\defbodyindent + \begingroup\setupverbatim +} % \def\doverbatiminclude#1{% - {% - \makevalueexpandable - \setupverbatim - \input #1 - \afterenvbreak - }% + % Restore active chars for included file. + \endgroup + \begingroup + \let\value=\expandablevalue + \def\thisfile{#1}% + \expandafter\expandafter\setupverbatiminclude\input\thisfile + \endgroup + \nonfillfinish + \endgroup } % @copying ... @end copying. -% Save the text away for @insertcopying later. +% Save the text away for @insertcopying later. Many commands won't be +% allowed in this context, but that's ok. % % We save the uninterpreted tokens, rather than creating a box. % Saving the text in a box would be much easier, but then all the @@ -5164,350 +4914,642 @@ where each line of input produces a line of output.} % file; b) letting users define the frontmatter in as flexible order as % possible is very desirable. % -\def\copying{\checkenv{}\begingroup\scanargctxt\docopying} -\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}} -% -\def\insertcopying{% - \begingroup - \parindent = 0pt % paragraph indentation looks wrong on title page - \scanexp\copyingtext - \endgroup +\def\copying{\begingroup + % Define a command to swallow text until we reach `@end copying'. + % \ is the escape char in this texinfo.tex file, so it is the + % delimiter for the command; @ will be the escape char when we read + % it, but that doesn't matter. + \long\def\docopying##1\end copying{\gdef\copyingtext{##1}\enddocopying}% + % + % We must preserve ^^M's in the input file; see \insertcopying below. + \catcode`\^^M = \active + \docopying +} + +% What we do to finish off the copying text. +% +\def\enddocopying{\endgroup\ignorespaces} + +% @insertcopying. Here we must play games with ^^M's. On the one hand, +% we need them to delimit commands such as `@end quotation', so they +% must be active. On the other hand, we certainly don't want every +% end-of-line to be a \par, as would happen with the normal active +% definition of ^^M. On the third hand, two ^^M's in a row should still +% generate a \par. +% +% Our approach is to make ^^M insert a space and a penalty1 normally; +% then it can also check if \lastpenalty=1. If it does, then manually +% do \par. +% +% This messes up the normal definitions of @c[omment], so we redefine +% it. Similarly for @ignore. (These commands are used in the gcc +% manual for man page generation.) +% +% Seems pretty fragile, most line-oriented commands will presumably +% fail, but for the limited use of getting the copying text (which +% should be quite simple) inserted, we can hope it's ok. +% +{\catcode`\^^M=\active % +\gdef\insertcopying{\begingroup % + \parindent = 0pt % looks wrong on title page + \def^^M{% + \ifnum \lastpenalty=1 % + \par % + \else % + \space \penalty 1 % + \fi % + }% + % + % Fix @c[omment] for catcode 13 ^^M's. + \def\c##1^^M{\ignorespaces}% + \let\comment = \c % + % + % Don't bother jumping through all the hoops that \doignore does, it + % would be very hard since the catcodes are already set. + \long\def\ignore##1\end ignore{\ignorespaces}% + % + \copyingtext % +\endgroup}% } \message{defuns,} % @defun etc. +% Allow user to change definition object font (\df) internally +\def\setdeffont#1 {\csname DEF#1\endcsname} + \newskip\defbodyindent \defbodyindent=.4in \newskip\defargsindent \defargsindent=50pt \newskip\deflastargmargin \deflastargmargin=18pt -% Start the processing of @deffn: -\def\startdefun{% - \ifnum\lastpenalty<10000 - \medbreak +\newcount\parencount + +% We want ()&[] to print specially on the defun line. +% +\def\activeparens{% + \catcode`\(=\active \catcode`\)=\active + \catcode`\&=\active + \catcode`\[=\active \catcode`\]=\active +} + +% Make control sequences which act like normal parenthesis chars. +\let\lparen = ( \let\rparen = ) + +{\activeparens % Now, smart parens don't turn on until &foo (see \amprm) + +% Be sure that we always have a definition for `(', etc. For example, +% if the fn name has parens in it, \boldbrax will not be in effect yet, +% so TeX would otherwise complain about undefined control sequence. +\global\let(=\lparen \global\let)=\rparen +\global\let[=\lbrack \global\let]=\rbrack + +\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 } +\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} +% This is used to turn on special parens +% but make & act ordinary (given that it's active). +\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr} + +% Definitions of (, ) and & used in args for functions. +% This is the definition of ( outside of all parentheses. +\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested + \global\advance\parencount by 1 +} +% +% This is the definition of ( when already inside a level of parens. +\gdef\opnested{\char`\(\global\advance\parencount by 1 } +% +\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0. + % also in that case restore the outer-level definition of (. + \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi + \global\advance \parencount by -1 } +% If we encounter &foo, then turn on ()-hacking afterwards +\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ } +% +\gdef\normalparens{\boldbrax\let&=\ampnr} +} % End of definition inside \activeparens +%% These parens (in \boldbrax) actually are a little bolder than the +%% contained text. This is especially needed for [ and ] +\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 } +\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 } +\let\ampnr = \& +\def\lbrb{{\bf\char`\[}} +\def\rbrb{{\bf\char`\]}} + +% Active &'s sneak into the index arguments, so make sure it's defined. +{ + \catcode`& = \active + \global\let& = \ampnr +} + +% \defname, which formats the name of the @def (not the args). +% #1 is the function name. +% #2 is the type of definition, such as "Function". +% +\def\defname#1#2{% + % How we'll output the type name. Putting it in brackets helps + % distinguish it from the body text that may end up on the next line + % just below it. + \ifempty{#2}% + \def\defnametype{}% \else - % If there are two @def commands in a row, we'll have a \nobreak, - % which is there to keep the function description together with its - % header. But if there's nothing but headers, we need to allow a - % break somewhere. Check specifically for penalty 10002, inserted - % by \defargscommonending, instead of 10000, since the sectioning - % commands also insert a nobreak penalty, and we don't want to allow - % a break between a section heading and a defun. - % - \ifnum\lastpenalty=10002 \penalty2000 \fi - % - % Similarly, after a section heading, do not allow a break. - % But do insert the glue. - \medskip % preceded by discardable penalty, so not a breakpoint + \def\defnametype{[\rm #2]}% \fi % + % Get the values of \leftskip and \rightskip as they were outside the @def... + \dimen2=\leftskip + \advance\dimen2 by -\defbodyindent + % + % Figure out values for the paragraph shape. + \setbox0=\hbox{\hskip \deflastargmargin{\defnametype}}% + \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line + \dimen1=\hsize \advance \dimen1 by -\defargsindent % size for continuations + \parshape 2 0in \dimen0 \defargsindent \dimen1 + % + % Output arg 2 ("Function" or some such) but stuck inside a box of + % width 0 so it does not interfere with linebreaking. + \noindent + % + {% Adjust \hsize to exclude the ambient margins, + % so that \rightline will obey them. + \advance \hsize by -\dimen2 + \dimen3 = 0pt % was -1.25pc + \rlap{\rightline{\defnametype\kern\dimen3}}% + }% + % + % Allow all lines to be underfull without complaint: + \tolerance=10000 \hbadness=10000 + \advance\leftskip by -\defbodyindent + \exdentamount=\defbodyindent + {\df #1}\enskip % output function name + % \defunargs will be called next to output the arguments, if any. +} + +% Common pieces to start any @def... +% #1 is the \E... control sequence to end the definition (which we define). +% #2 is the \...x control sequence (which our caller defines). +% #3 is the control sequence to process the header, such as \defunheader. +% +\def\parsebodycommon#1#2#3{% + \begingroup\inENV + % If there are two @def commands in a row, we'll have a \nobreak, + % which is there to keep the function description together with its + % header. But if there's nothing but headers, we want to allow a + % break after all. Check for penalty 10002 (inserted by + % \defargscommonending) instead of 10000, since the sectioning + % commands insert a \penalty10000, and we don't want to allow a break + % between a section heading and a defun. + \ifnum\lastpenalty=10002 \penalty0 \fi + \medbreak + % + % Define the \E... end token that this defining construct specifies + % so that it will exit this group. + \def#1{\endgraf\endgroup\medbreak}% + % \parindent=0in \advance\leftskip by \defbodyindent \exdentamount=\defbodyindent } -\def\dodefunx#1{% - % First, check whether we are in the right environment: - \checkenv#1% - % - % As above, allow line break if we have multiple x headers in a row. - % It's not a great place, though. - \ifnum\lastpenalty=10002 \penalty3000 \fi +% Common part of the \...x definitions. +% +\def\defxbodycommon{% + % As with \parsebodycommon above, allow line break if we have multiple + % x headers in a row. It's not a great place, though. + \ifnum\lastpenalty=10000 \penalty1000 \fi % - % And now, it's time to reuse the body of the original defun: - \expandafter\gobbledefun#1% + \begingroup\obeylines } -\def\gobbledefun#1\startdefun{} -% \printdefunline \deffnheader{text} +% Process body of @defun, @deffn, @defmac, etc. % -\def\printdefunline#1#2{% - \begingroup - % call \deffnheader: - #1#2 \endheader - % common ending: - \interlinepenalty = 10000 - \advance\rightskip by 0pt plus 1fil - \endgraf - \nobreak\vskip -\parskip - \penalty 10002 % signal to \startdefun and \dodefunx - % Some of the @defun-type tags do not enable magic parentheses, - % rendering the following check redundant. But we don't optimize. - \checkparencounts - \endgroup +\def\defparsebody#1#2#3{% + \parsebodycommon{#1}{#2}{#3}% + \def#2{\defxbodycommon \activeparens \spacesplit#3}% + \catcode\equalChar=\active + \begingroup\obeylines\activeparens + \spacesplit#3% } -\def\Edefun{\endgraf\medbreak} +% #1, #2, #3 are the common arguments (see \parsebodycommon above). +% #4, delimited by the space, is the class name. +% +\def\defmethparsebody#1#2#3#4 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 {\defxbodycommon \activeparens \spacesplit{#3{##1}}}% + \begingroup\obeylines\activeparens + % The \empty here prevents misinterpretation of a construct such as + % @deffn {whatever} {Enharmonic comma} + % See comments at \deftpparsebody, although in our case we don't have + % to remove the \empty afterwards, since it is empty. + \spacesplit{#3{#4}}\empty +} -% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn; -% the only thing remainnig is to define \deffnheader. +% Used for @deftypemethod and @deftypeivar. +% #1, #2, #3 are the common arguments (see \defparsebody). +% #4, delimited by a space, is the class name. +% #5 is the method's return type. % -\def\makedefun#1{% - \expandafter\let\csname E#1\endcsname = \Edefun - \edef\temp{\noexpand\domakedefun - \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}% - \temp +\def\deftypemethparsebody#1#2#3#4 #5 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 ##2 {\defxbodycommon \activeparens \spacesplit{#3{##1}{##2}}}% + \begingroup\obeylines\activeparens + \spacesplit{#3{#4}{#5}}% } -% \domakedefun \deffn \deffnx \deffnheader +% Used for @deftypeop. The change from \deftypemethparsebody is an +% extra argument at the beginning which is the `category', instead of it +% being the hardwired string `Method' or `Instance Variable'. We have +% to account for this both in the \...x definition and in parsing the +% input at hand. Thus also need a control sequence (passed as #5) for +% the \E... definition to assign the category name to. % -% Define \deffn and \deffnx, without parameters. -% \deffnheader has to be defined explicitly. +\def\deftypeopparsebody#1#2#3#4#5 #6 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 ##2 ##3 {\def#4{##1}% + \defxbodycommon \activeparens \spacesplit{#3{##2}{##3}}}% + \begingroup\obeylines\activeparens + \spacesplit{#3{#5}{#6}}% +} + +% For @defop. +\def\defopparsebody #1#2#3#4#5 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 ##2 {\def#4{##1}% + \defxbodycommon \activeparens \spacesplit{#3{##2}}}% + \begingroup\obeylines\activeparens + \spacesplit{#3{#5}}% +} + +% These parsing functions are similar to the preceding ones +% except that they do not make parens into active characters. +% These are used for "variables" since they have no arguments. % -\def\domakedefun#1#2#3{% - \envdef#1{% - \startdefun - \parseargusing\activeparens{\printdefunline#3}% - }% - \def#2{\dodefunx#1}% - \def#3% +\def\defvarparsebody #1#2#3{% + \parsebodycommon{#1}{#2}{#3}% + \def#2{\defxbodycommon \spacesplit#3}% + \catcode\equalChar=\active + \begingroup\obeylines + \spacesplit#3% } -%%% Untyped functions: +% @defopvar. +\def\defopvarparsebody #1#2#3#4#5 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 ##2 {\def#4{##1}% + \defxbodycommon \spacesplit{#3{##2}}}% + \begingroup\obeylines + \spacesplit{#3{#5}}% +} -% @deffn category name args -\makedefun{deffn}{\deffngeneral{}} +\def\defvrparsebody#1#2#3#4 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}% + \begingroup\obeylines + \spacesplit{#3{#4}}% +} -% @deffn category class name args -\makedefun{defop}#1 {\defopon{#1\ \putwordon}} +% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the +% type is just `struct', because we lose the braces in `{struct +% termios}' when \spacesplit reads its undelimited argument. Sigh. +% \let\deftpparsebody=\defvrparsebody +% +% So, to get around this, we put \empty in with the type name. That +% way, TeX won't find exactly `{...}' as an undelimited argument, and +% won't strip off the braces. +% +\def\deftpparsebody #1#2#3#4 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}% + \begingroup\obeylines + \spacesplit{\parsetpheaderline{#3{#4}}}\empty +} + +% Fine, but then we have to eventually remove the \empty *and* the +% braces (if any). That's what this does. +% +\def\removeemptybraces\empty#1\relax{#1} -% \defopon {category on}class name args -\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } +% After \spacesplit has done its work, this is called -- #1 is the final +% thing to call, #2 the type name (which starts with \empty), and #3 +% (which might be empty) the arguments. +% +\def\parsetpheaderline#1#2#3{% + #1{\removeemptybraces#2\relax}{#3}% +}% -% \deffngeneral {subind}category name args +% Split up #2 (the rest of the input line) at the first space token. +% call #1 with two arguments: +% the first is all of #2 before the space token, +% the second is all of #2 after that space token. +% If #2 contains no space token, all of it is passed as the first arg +% and the second is passed as empty. % -\def\deffngeneral#1#2 #3 #4\endheader{% - % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}. - \dosubind{fn}{\code{#3}}{#1}% - \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}% +{\obeylines % + \gdef\spacesplit#1#2^^M{\endgroup\spacesplitx{#1}#2 \relax\spacesplitx}% + \long\gdef\spacesplitx#1#2 #3#4\spacesplitx{% + \ifx\relax #3% + #1{#2}{}% + \else % + #1{#2}{#3#4}% + \fi}% } -%%% Typed functions: +% Define @defun. -% @deftypefn category type name args -\makedefun{deftypefn}{\deftypefngeneral{}} +% This is called to end the arguments processing for all the @def... commands. +% +\def\defargscommonending{% + \interlinepenalty = 10000 + \advance\rightskip by 0pt plus 1fil + \endgraf + \nobreak\vskip -\parskip + \penalty 10002 % signal to \parsebodycommon. +} -% @deftypeop category class type name args -\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}} +% This expands the args and terminates the paragraph they comprise. +% +\def\defunargs#1{\functionparens \sl +% Expand, preventing hyphenation at `-' chars. +% Note that groups don't affect changes in \hyphenchar. +% Set the font temporarily and use \font in case \setfont made \tensl a macro. +{\tensl\hyphenchar\font=0}% +#1% +{\tensl\hyphenchar\font=45}% +\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi% + \defargscommonending +} -% \deftypeopon {category on}class type name args -\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } +\def\deftypefunargs #1{% +% Expand, preventing hyphenation at `-' chars. +% Note that groups don't affect changes in \hyphenchar. +% Use \boldbraxnoamp, not \functionparens, so that & is not special. +\boldbraxnoamp +\tclose{#1}% avoid \code because of side effects on active chars + \defargscommonending +} -% \deftypefngeneral {subind}category type name args -% -\def\deftypefngeneral#1#2 #3 #4 #5\endheader{% - \dosubind{fn}{\code{#4}}{#1}% - \defname{#2}{#3}{#4}\defunargs{#5\unskip}% +% Do complete processing of one @defun or @defunx line already parsed. + +% @deffn Command forward-char nchars + +\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader} + +\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}% +\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup % +\catcode\equalChar=\other % Turn off change made in \defparsebody } -%%% Typed variables: +% @defun == @deffn Function -% @deftypevr category type var args -\makedefun{deftypevr}{\deftypecvgeneral{}} +\def\defun{\defparsebody\Edefun\defunx\defunheader} -% @deftypecv category class type var args -\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}} +\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index +\begingroup\defname {#1}{\putwordDeffunc}% +\defunargs {#2}\endgroup % +\catcode\equalChar=\other % Turn off change made in \defparsebody +} -% \deftypecvof {category of}class type var args -\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} } +% @deftypefun int foobar (int @var{foo}, float @var{bar}) -% \deftypecvgeneral {subind}category type var args -% -\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{% - \dosubind{vr}{\code{#4}}{#1}% - \defname{#2}{#3}{#4}\defunargs{#5\unskip}% +\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader} + +% #1 is the data type. #2 is the name and args. +\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax} +% #1 is the data type, #2 the name, #3 the args. +\def\deftypefunheaderx #1#2 #3\relax{% +\doind {fn}{\code{#2}}% Make entry in function index +\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypefun}% +\deftypefunargs {#3}\endgroup % +\catcode\equalChar=\other % Turn off change made in \defparsebody } -%%% Untyped variables: +% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar}) -% @defvr category var args -\makedefun{defvr}#1 {\deftypevrheader{#1} {} } +\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader} -% @defcv category class var args -\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}} +% \defheaderxcond#1\relax$.$ +% puts #1 in @code, followed by a space, but does nothing if #1 is null. +\def\defheaderxcond#1#2$.${\ifx#1\relax\else\code{#1#2} \fi} -% \defcvof {category of}class var args -\def\defcvof#1#2 {\deftypecvof{#1}#2 {} } +% #1 is the classification. #2 is the data type. #3 is the name and args. +\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax} +% #1 is the classification, #2 the data type, #3 the name, #4 the args. +\def\deftypefnheaderx #1#2#3 #4\relax{% +\doind {fn}{\code{#3}}% Make entry in function index +\begingroup +\normalparens % notably, turn off `&' magic, which prevents +% at least some C++ text from working +\defname {\defheaderxcond#2\relax$.$#3}{#1}% +\deftypefunargs {#4}\endgroup % +\catcode\equalChar=\other % Turn off change made in \defparsebody +} + +% @defmac == @deffn Macro + +\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader} -%%% Type: -% @deftp category name args -\makedefun{deftp}#1 #2 #3\endheader{% - \doind{tp}{\code{#2}}% - \defname{#1}{}{#2}\defunargs{#3\unskip}% +\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index +\begingroup\defname {#1}{\putwordDefmac}% +\defunargs {#2}\endgroup % +\catcode\equalChar=\other % Turn off change made in \defparsebody } -% Remaining @defun-like shortcuts: -\makedefun{defun}{\deffnheader{\putwordDeffunc} } -\makedefun{defmac}{\deffnheader{\putwordDefmac} } -\makedefun{defspec}{\deffnheader{\putwordDefspec} } -\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} } -\makedefun{defvar}{\defvrheader{\putwordDefvar} } -\makedefun{defopt}{\defvrheader{\putwordDefopt} } -\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} } -\makedefun{defmethod}{\defopon\putwordMethodon} -\makedefun{deftypemethod}{\deftypeopon\putwordMethodon} -\makedefun{defivar}{\defcvof\putwordInstanceVariableof} -\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof} +% @defspec == @deffn Special Form -% \defname, which formats the name of the @def (not the args). -% #1 is the category, such as "Function". -% #2 is the return type, if any. -% #3 is the function name. +\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader} + +\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index +\begingroup\defname {#1}{\putwordDefspec}% +\defunargs {#2}\endgroup % +\catcode\equalChar=\other % Turn off change made in \defparsebody +} + +% @defop CATEGORY CLASS OPERATION ARG... % -% We are followed by (but not passed) the arguments, if any. +\def\defop #1 {\def\defoptype{#1}% +\defopparsebody\Edefop\defopx\defopheader\defoptype} % -\def\defname#1#2#3{% - % Get the values of \leftskip and \rightskip as they were outside the @def... - \advance\leftskip by -\defbodyindent - % - % How we'll format the type name. Putting it in brackets helps - % distinguish it from the body text that may end up on the next line - % just below it. - \def\temp{#1}% - \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi} - % - % Figure out line sizes for the paragraph shape. - % The first line needs space for \box0; but if \rightskip is nonzero, - % we need only space for the part of \box0 which exceeds it: - \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip - % The continuations: - \dimen2=\hsize \advance\dimen2 by -\defargsindent - % (plain.tex says that \dimen1 should be used only as global.) - \parshape 2 0in \dimen0 \defargsindent \dimen2 - % - % Put the type name to the right margin. - \noindent - \hbox to 0pt{% - \hfil\box0 \kern-\hsize - % \hsize has to be shortened this way: - \kern\leftskip - % Intentionally do not respect \rightskip, since we need the space. - }% - % - % Allow all lines to be underfull without complaint: - \tolerance=10000 \hbadness=10000 - \exdentamount=\defbodyindent - {% - % defun fonts. We use typewriter by default (used to be bold) because: - % . we're printing identifiers, they should be in tt in principle. - % . in languages with many accents, such as Czech or French, it's - % common to leave accents off identifiers. The result looks ok in - % tt, but exceedingly strange in rm. - % . we don't want -- and --- to be treated as ligatures. - % . this still does not fix the ?` and !` ligatures, but so far no - % one has made identifiers using them :). - \df \tt - \def\temp{#2}% return value type - \ifx\temp\empty\else \tclose{\temp} \fi - #3% output function name - }% - {\rm\enskip}% hskip 0.5 em of \tenrm - % - \boldbrax - % arguments will be output next, if any. +\def\defopheader#1#2#3{% + \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% function index entry + \begingroup + \defname{#2}{\defoptype\ \putwordon\ #1}% + \defunargs{#3}% + \endgroup } -% Print arguments in slanted roman (not ttsl), inconsistently with using -% tt for the name. This is because literal text is sometimes needed in -% the argument list (groff manual), and ttsl and tt are not very -% distinguishable. Prevent hyphenation at `-' chars. +% @deftypeop CATEGORY CLASS TYPE OPERATION ARG... % -\def\defunargs#1{% - % use sl by default (not ttsl), - % tt for the names. - \df \sl \hyphenchar\font=0 - % - % On the other hand, if an argument has two dashes (for instance), we - % want a way to get ttsl. Let's try @var for that. - \let\var=\ttslanted - #1% - \sl\hyphenchar\font=45 +\def\deftypeop #1 {\def\deftypeopcategory{#1}% + \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader + \deftypeopcategory} +% +% #1 is the class name, #2 the data type, #3 the operation name, #4 the args. +\def\deftypeopheader#1#2#3#4{% + \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index + \begingroup + \defname{\defheaderxcond#2\relax$.$#3} + {\deftypeopcategory\ \putwordon\ \code{#1}}% + \deftypefunargs{#4}% + \endgroup } -% We want ()&[] to print specially on the defun line. +% @deftypemethod CLASS TYPE METHOD ARG... % -\def\activeparens{% - \catcode`\(=\active \catcode`\)=\active - \catcode`\[=\active \catcode`\]=\active - \catcode`\&=\active +\def\deftypemethod{% + \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader} +% +% #1 is the class name, #2 the data type, #3 the method name, #4 the args. +\def\deftypemethodheader#1#2#3#4{% + \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index + \begingroup + \defname{\defheaderxcond#2\relax$.$#3}{\putwordMethodon\ \code{#1}}% + \deftypefunargs{#4}% + \endgroup } -% Make control sequences which act like normal parenthesis chars. -\let\lparen = ( \let\rparen = ) - -% Be sure that we always have a definition for `(', etc. For example, -% if the fn name has parens in it, \boldbrax will not be in effect yet, -% so TeX would otherwise complain about undefined control sequence. -{ - \activeparens - \global\let(=\lparen \global\let)=\rparen - \global\let[=\lbrack \global\let]=\rbrack - \global\let& = \& +% @deftypeivar CLASS TYPE VARNAME +% +\def\deftypeivar{% + \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader} +% +% #1 is the class name, #2 the data type, #3 the variable name. +\def\deftypeivarheader#1#2#3{% + \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index + \begingroup + \defname{\defheaderxcond#2\relax$.$#3} + {\putwordInstanceVariableof\ \code{#1}}% + \defvarargs{#3}% + \endgroup +} - \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} - \gdef\magicamp{\let&=\amprm} +% @defmethod == @defop Method +% +\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader} +% +% #1 is the class name, #2 the method name, #3 the args. +\def\defmethodheader#1#2#3{% + \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index + \begingroup + \defname{#2}{\putwordMethodon\ \code{#1}}% + \defunargs{#3}% + \endgroup } -\newcount\parencount +% @defcv {Class Option} foo-class foo-flag -% If we encounter &foo, then turn on ()-hacking afterwards -\newif\ifampseen -\def\amprm#1 {\ampseentrue{\bf\ }} - -\def\parenfont{% - \ifampseen - % At the first level, print parens in roman, - % otherwise use the default font. - \ifnum \parencount=1 \rm \fi - \else - % The \sf parens (in \boldbrax) actually are a little bolder than - % the contained text. This is especially needed for [ and ] . - \sf - \fi -} -\def\infirstlevel#1{% - \ifampseen - \ifnum\parencount=1 - #1% - \fi - \fi -} -\def\bfafterword#1 {#1 \bf} +\def\defcv #1 {\def\defcvtype{#1}% +\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype} -\def\opnr{% - \global\advance\parencount by 1 - {\parenfont(}% - \infirstlevel \bfafterword -} -\def\clnr{% - {\parenfont)}% - \infirstlevel \sl - \global\advance\parencount by -1 +\def\defcvarheader #1#2#3{% + \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% variable index entry + \begingroup + \defname{#2}{\defcvtype\ \putwordof\ #1}% + \defvarargs{#3}% + \endgroup } -\newcount\brackcount -\def\lbrb{% - \global\advance\brackcount by 1 - {\bf[}% -} -\def\rbrb{% - {\bf]}% - \global\advance\brackcount by -1 +% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME +% +\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader} +% +\def\defivarheader#1#2#3{% + \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% entry in var index + \begingroup + \defname{#2}{\putwordInstanceVariableof\ #1}% + \defvarargs{#3}% + \endgroup } -\def\checkparencounts{% - \ifnum\parencount=0 \else \badparencount \fi - \ifnum\brackcount=0 \else \badbrackcount \fi +% @defvar +% First, define the processing that is wanted for arguments of @defvar. +% This is actually simple: just print them in roman. +% This must expand the args and terminate the paragraph they make up +\def\defvarargs #1{\normalparens #1% + \defargscommonending } -\def\badparencount{% - \errmessage{Unbalanced parentheses in @def}% - \global\parencount=0 + +% @defvr Counter foo-count + +\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader} + +\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}% +\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup} + +% @defvar == @defvr Variable + +\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader} + +\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index +\begingroup\defname {#1}{\putwordDefvar}% +\defvarargs {#2}\endgroup % } -\def\badbrackcount{% - \errmessage{Unbalanced square braces in @def}% - \global\brackcount=0 + +% @defopt == @defvr {User Option} + +\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader} + +\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index +\begingroup\defname {#1}{\putwordDefopt}% +\defvarargs {#2}\endgroup % } +% @deftypevar int foobar + +\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader} + +% #1 is the data type. #2 is the name, perhaps followed by text that +% is actually part of the data type, which should not be put into the index. +\def\deftypevarheader #1#2{% +\dovarind#2 \relax% Make entry in variables index +\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypevar}% + \defargscommonending +\endgroup} +\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}} + +% @deftypevr {Global Flag} int enable + +\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader} + +\def\deftypevrheader #1#2#3{\dovarind#3 \relax% +\begingroup\defname {\defheaderxcond#2\relax$.$#3}{#1} + \defargscommonending +\endgroup} + +% Now define @deftp +% Args are printed in bold, a slight difference from @defvar. + +\def\deftpargs #1{\bf \defvarargs{#1}} + +% @deftp Class window height width ... + +\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader} + +\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}% +\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup} + +% These definitions are used if you use @defunx (etc.) +% anywhere other than immediately after a @defun or @defunx. +% +\def\defcvx#1 {\errmessage{@defcvx in invalid context}} +\def\deffnx#1 {\errmessage{@deffnx in invalid context}} +\def\defivarx#1 {\errmessage{@defivarx in invalid context}} +\def\defmacx#1 {\errmessage{@defmacx in invalid context}} +\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}} +\def\defoptx #1 {\errmessage{@defoptx in invalid context}} +\def\defopx#1 {\errmessage{@defopx in invalid context}} +\def\defspecx#1 {\errmessage{@defspecx in invalid context}} +\def\deftpx#1 {\errmessage{@deftpx in invalid context}} +\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}} +\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}} +\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}} +\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}} +\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}} +\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}} +\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}} +\def\defunx#1 {\errmessage{@defunx in invalid context}} +\def\defvarx#1 {\errmessage{@defvarx in invalid context}} +\def\defvrx#1 {\errmessage{@defvrx in invalid context}} + \message{macros,} % @macro. @@ -5515,41 +5557,27 @@ where each line of input produces a line of output.} % To do this right we need a feature of e-TeX, \scantokens, % which we arrange to emulate with a temporary file in ordinary TeX. \ifx\eTeXversion\undefined - \newwrite\macscribble - \def\scantokens#1{% - \toks0={#1}% - \immediate\openout\macscribble=\jobname.tmp - \immediate\write\macscribble{\the\toks0}% - \immediate\closeout\macscribble - \input \jobname.tmp - } -\fi - -\def\scanmacro#1{% - \begingroup - \newlinechar`\^^M - \let\xeatspaces\eatspaces - % Undo catcode changes of \startcontents and \doprintindex - % When called from @insertcopying or (short)caption, we need active - % backslash to get it printed correctly. Previously, we had - % \catcode`\\=\other instead. We'll see whether a problem appears - % with macro expansion. --kasal, 19aug04 - \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ - % ... and \example - \spaceisspace - % - % Append \endinput to make sure that TeX does not see the ending newline. - % - % I've verified that it is necessary both for e-TeX and for ordinary TeX - % --kasal, 29nov03 - \scantokens{#1\endinput}% - \endgroup -} - -\def\scanexp#1{% - \edef\temp{\noexpand\scanmacro{#1}}% - \temp + \newwrite\macscribble + \def\scanmacro#1{% + \begingroup \newlinechar`\^^M + % Undo catcode changes of \startcontents and \doprintindex + \catcode`\@=0 \catcode`\\=\other \escapechar=`\@ + % Append \endinput to make sure that TeX does not see the ending newline. + \toks0={#1\endinput}% + \immediate\openout\macscribble=\jobname.tmp + \immediate\write\macscribble{\the\toks0}% + \immediate\closeout\macscribble + \let\xeatspaces\eatspaces + \input \jobname.tmp + \endgroup } +\else +\def\scanmacro#1{% +\begingroup \newlinechar`\^^M +% Undo catcode changes of \startcontents and \doprintindex +\catcode`\@=0 \catcode`\\=\other \escapechar=`\@ +\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup} +\fi \newcount\paramno % Count of parameters \newtoks\macname % Macro name @@ -5558,15 +5586,13 @@ where each line of input produces a line of output.} % \do\macro1\do\macro2... % Utility routines. -% This does \let #1 = #2, with \csnames; that is, -% \let \csname#1\endcsname = \csname#2\endcsname -% (except of course we have to play expansion games). -% +% Thisdoes \let #1 = #2, except with \csnames. \def\cslet#1#2{% - \expandafter\let - \csname#1\expandafter\endcsname - \csname#2\endcsname -} +\expandafter\expandafter +\expandafter\let +\expandafter\expandafter +\csname#1\endcsname +\csname#2\endcsname} % Trim leading and trailing spaces off a string. % Concepts from aro-bend problem 15 (see CTAN). @@ -5593,36 +5619,30 @@ where each line of input produces a line of output.} % done by making ^^M (\endlinechar) catcode 12 when reading the macro % body, and then making it the \newlinechar in \scanmacro. -\def\scanctxt{% - \catcode`\"=\other - \catcode`\+=\other - \catcode`\<=\other - \catcode`\>=\other - \catcode`\@=\other +\def\macrobodyctxt{% + \catcode`\~=\other \catcode`\^=\other \catcode`\_=\other \catcode`\|=\other - \catcode`\~=\other -} - -\def\scanargctxt{% - \scanctxt - \catcode`\\=\other - \catcode`\^^M=\other -} - -\def\macrobodyctxt{% - \scanctxt + \catcode`\<=\other + \catcode`\>=\other + \catcode`\+=\other \catcode`\{=\other \catcode`\}=\other + \catcode`\@=\other \catcode`\^^M=\other - \usembodybackslash -} + \usembodybackslash} \def\macroargctxt{% - \scanctxt - \catcode`\\=\other -} + \catcode`\~=\other + \catcode`\^=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\+=\other + \catcode`\@=\other + \catcode`\\=\other} % \mbodybackslash is the definition of \ in @macro bodies. % It maps \foo\ => \csname macarg.foo\endcsname => #N @@ -5663,7 +5683,8 @@ where each line of input produces a line of output.} \else \expandafter\parsemacbody \fi} -\parseargdef\unmacro{% +\def\unmacro{\parsearg\dounmacro} +\def\dounmacro#1{% \if1\csname ismacro.#1\endcsname \global\cslet{#1}{macsave.#1}% \global\expandafter\let \csname ismacro.#1\endcsname=0% @@ -5804,41 +5825,25 @@ where each line of input produces a line of output.} \expandafter\parsearg \fi \next} -% We want to disable all macros during \shipout so that they are not +% We mant to disable all macros during \shipout so that they are not % expanded by \write. \def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}% \edef\next{\macrolist}\expandafter\endgroup\next} -% For \indexnofonts, we need to get rid of all macros, leaving only the -% arguments (if present). Of course this is not nearly correct, but it -% is the best we can do for now. makeinfo does not expand macros in the -% argument to @deffn, which ends up writing an index entry, and texindex -% isn't prepared for an index sort entry that starts with \. -% -% Since macro invocations are followed by braces, we can just redefine them -% to take a single TeX argument. The case of a macro invocation that -% goes to end-of-line is not handled. -% -\def\emptyusermacros{\begingroup - \def\do##1{\let\noexpand##1=\noexpand\asis}% - \edef\next{\macrolist}\expandafter\endgroup\next} - % @alias. % We need some trickery to remove the optional spaces around the equal % sign. Just make them active and then expand them all to nothing. -\def\alias{\parseargusing\obeyspaces\aliasxxx} +\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx} \def\aliasxxx #1{\aliasyyy#1\relax} -\def\aliasyyy #1=#2\relax{% - {% - \expandafter\let\obeyedspace=\empty - \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}% - }% - \next -} +\def\aliasyyy #1=#2\relax{\ignoreactivespaces +\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=% + \expandafter\noexpand\csname#2\endcsname}% +\expandafter\endgroup\next} \message{cross references,} +% @xref etc. \newwrite\auxfile @@ -5850,70 +5855,64 @@ where each line of input produces a line of output.} \def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, node \samp{\ignorespaces#1{}}} -% @node's only job in TeX is to define \lastnode, which is used in -% cross-references. The @node line might or might not have commas, and -% might or might not have spaces before the first comma, like: -% @node foo , bar , ... -% We don't want such trailing spaces in the node name. -% -\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse} -% -% also remove a trailing comma, in case of something like this: -% @node Help-Cross, , , Cross-refs -\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse} -\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}} - +% @node's job is to define \lastnode. +\def\node{\ENVcheck\parsearg\nodezzz} +\def\nodezzz#1{\nodexxx #1,\finishnodeparse} +\def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}} \let\nwnode=\node -\let\lastnode=\empty - -% Write a cross-reference definition for the current node. #1 is the -% type (Ynumbered, Yappendix, Ynothing). -% -\def\donoderef#1{% - \ifx\lastnode\empty\else - \setref{\lastnode}{#1}% - \global\let\lastnode=\empty +\let\lastnode=\relax + +% The sectioning commands (@chapter, etc.) call these. +\def\donoderef{% + \ifx\lastnode\relax\else + \expandafter\expandafter\expandafter\setref{\lastnode}% + {Ysectionnumberandtype}% + \global\let\lastnode=\relax + \fi +} +\def\unnumbnoderef{% + \ifx\lastnode\relax\else + \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}% + \global\let\lastnode=\relax \fi } +\def\appendixnoderef{% + \ifx\lastnode\relax\else + \expandafter\expandafter\expandafter\setref{\lastnode}% + {Yappendixletterandtype}% + \global\let\lastnode=\relax + \fi +} + % @anchor{NAME} -- define xref target at arbitrary point. % \newcount\savesfregister -% -\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} -\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} -\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} +\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} +\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} +\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} % \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an -% anchor), which consists of three parts: -% 1) NAME-title - the current sectioning name taken from \thissection, -% or the anchor name. -% 2) NAME-snt - section number and type, passed as the SNT arg, or -% empty for anchors. -% 3) NAME-pg - the page number. -% -% This is called from \donoderef, \anchor, and \dofloat. In the case of -% floats, there is an additional part, which is not written here: -% 4) NAME-lof - the text as it should appear in a @listoffloats. -% -\def\setref#1#2{% +% anchor), namely NAME-title (the corresponding @chapter/etc. name), +% NAME-pg (the page number), and NAME-snt (section number and type). +% Called from \foonoderef. +% +% We have to set \indexdummies so commands such as @code in a section +% title aren't expanded. It would be nicer not to expand the titles in +% the first place, but there's so many layers that that is hard to do. +% +% Likewise, use \turnoffactive so that punctuation chars such as underscore +% and backslash work in node names. +% +\def\setref#1#2{{% + \atdummies \pdfmkdest{#1}% - \iflinks - {% - \atdummies % preserve commands, but don't expand them - \turnoffactive - \otherbackslash - \edef\writexrdef##1##2{% - \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef - ##1}{##2}}% these are parameters of \writexrdef - }% - \toks0 = \expandafter{\thissection}% - \immediate \writexrdef{title}{\the\toks0 }% - \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. - \writexrdef{pg}{\folio}% will be written later, during \shipout - }% - \fi -} + % + \turnoffactive + \dosetq{#1-title}{Ytitle}% + \dosetq{#1-pg}{Ypagenumber}% + \dosetq{#1-snt}{#2}% +}} % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is % the node name, #2 the name of the Info cross-reference, #3 the printed @@ -5926,33 +5925,38 @@ where each line of input produces a line of output.} \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup \unsepspaces \def\printedmanual{\ignorespaces #5}% - \def\printedrefname{\ignorespaces #3}% - \setbox1=\hbox{\printedmanual\unskip}% - \setbox0=\hbox{\printedrefname\unskip}% + \def\printednodename{\ignorespaces #3}% + \setbox1=\hbox{\printedmanual}% + \setbox0=\hbox{\printednodename}% \ifdim \wd0 = 0pt % No printed node name was explicitly given. \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax % Use the node name inside the square brackets. - \def\printedrefname{\ignorespaces #1}% + \def\printednodename{\ignorespaces #1}% \else % Use the actual chapter/section title appear inside % the square brackets. Use the real section title if we have it. \ifdim \wd1 > 0pt % It is in another manual, so we don't have it. - \def\printedrefname{\ignorespaces #1}% + \def\printednodename{\ignorespaces #1}% \else \ifhavexrefs % We know the real title if we have the xref values. - \def\printedrefname{\refx{#1-title}{}}% + \def\printednodename{\refx{#1-title}{}}% \else % Otherwise just copy the Info node name. - \def\printedrefname{\ignorespaces #1}% + \def\printednodename{\ignorespaces #1}% \fi% \fi \fi \fi % - % Make link in pdf output. + % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not + % insert empty discretionaries after hyphens, which means that it will + % not find a line break at a hyphen in a node names. Since some manuals + % are best written with fairly long node names, containing hyphens, this + % is a loss. Therefore, we give the text of the node name again, so it + % is as if TeX is seeing it for the first time. \ifpdf \leavevmode \getfilename{#4}% @@ -5962,86 +5966,64 @@ where each line of input produces a line of output.} goto file{\the\filename.pdf} name{#1}% \else \startlink attr{/Border [0 0 0]}% - goto name{\pdfmkpgn{#1}}% + goto name{#1}% \fi }% \linkcolor \fi % - % Float references are printed completely differently: "Figure 1.2" - % instead of "[somenode], p.3". We distinguish them by the - % LABEL-title being set to a magic string. - {% - % Have to otherify everything special to allow the \csname to - % include an _ in the xref name, etc. - \indexnofonts - \turnoffactive - \otherbackslash - \expandafter\global\expandafter\let\expandafter\Xthisreftitle - \csname XR#1-title\endcsname - }% - \iffloat\Xthisreftitle - % If the user specified the print name (third arg) to the ref, - % print it instead of our usual "Figure 1.2". - \ifdim\wd0 = 0pt - \refx{#1-snt}% - \else - \printedrefname - \fi - % - % if the user also gave the printed manual name (fifth arg), append - % "in MANUALNAME". - \ifdim \wd1 > 0pt - \space \putwordin{} \cite{\printedmanual}% - \fi + \ifdim \wd1 > 0pt + \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}% \else - % node/anchor (non-float) references. + % _ (for example) has to be the character _ for the purposes of the + % control sequence corresponding to the node, but it has to expand + % into the usual \leavevmode...\vrule stuff for purposes of + % printing. So we \turnoffactive for the \refx-snt, back on for the + % printing, back off for the \refx-pg. + {\turnoffactive \otherbackslash + % Only output a following space if the -snt ref is nonempty; for + % @unnumbered and @anchor, it won't be. + \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% + \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi + }% + % output the `[mynode]' via a macro. + \xrefprintnodename\printednodename % - % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not - % insert empty discretionaries after hyphens, which means that it will - % not find a line break at a hyphen in a node names. Since some manuals - % are best written with fairly long node names, containing hyphens, this - % is a loss. Therefore, we give the text of the node name again, so it - % is as if TeX is seeing it for the first time. - \ifdim \wd1 > 0pt - \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}% - \else - % _ (for example) has to be the character _ for the purposes of the - % control sequence corresponding to the node, but it has to expand - % into the usual \leavevmode...\vrule stuff for purposes of - % printing. So we \turnoffactive for the \refx-snt, back on for the - % printing, back off for the \refx-pg. - {\turnoffactive \otherbackslash - % Only output a following space if the -snt ref is nonempty; for - % @unnumbered and @anchor, it won't be. - \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% - \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi - }% - % output the `[mynode]' via a macro so it can be overridden. - \xrefprintnodename\printedrefname - % - % But we always want a comma and a space: - ,\space - % - % output the `page 3'. - \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}% - \fi + % But we always want a comma and a space: + ,\space + % + % output the `page 3'. + \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}% \fi \endlink \endgroup} % This macro is called from \xrefX for the `[nodename]' part of xref % output. It's a separate macro only so it can be changed more easily, -% since square brackets don't work well in some documents. Particularly +% since not square brackets don't work in some documents. Particularly % one that Bob is working on :). % \def\xrefprintnodename#1{[#1]} -% Things referred to by \setref. +% \dosetq is called from \setref to do the actual \write (\iflinks). +% +\def\dosetq#1#2{% + {\let\folio=0% + \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}% + \iflinks \next \fi + }% +} + +% \internalsetq{foo}{page} expands into +% CHARACTERS @xrdef{foo}{...expansion of \page...} +\def\internalsetq#1#2{@xrdef{#1}{\csname #2\endcsname}} + +% Things to be expanded by \internalsetq. % +\def\Ypagenumber{\folio} +\def\Ytitle{\thissection} \def\Ynothing{} -\def\Yomitfromtoc{} -\def\Ynumbered{% +\def\Ysectionnumberandtype{% \ifnum\secno=0 \putwordChapter@tie \the\chapno \else \ifnum\subsecno=0 @@ -6052,7 +6034,8 @@ where each line of input produces a line of output.} \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno \fi\fi\fi } -\def\Yappendix{% + +\def\Yappendixletterandtype{% \ifnum\secno=0 \putwordAppendix@tie @char\the\appendixno{}% \else \ifnum\subsecno=0 @@ -6065,6 +6048,15 @@ where each line of input produces a line of output.} \fi\fi\fi } +% Use TeX 3.0's \inputlineno to get the line number, for better error +% messages, but if we're using an old version of TeX, don't do anything. +% +\ifx\inputlineno\thisisundefined + \let\linenumber = \empty % Pre-3.0. +\else + \def\linenumber{\the\inputlineno:\space} +\fi + % Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. % If its value is nonempty, SUFFIX is output afterward. % @@ -6073,7 +6065,7 @@ where each line of input produces a line of output.} \indexnofonts \otherbackslash \expandafter\global\expandafter\let\expandafter\thisrefX - \csname XR#1\endcsname + \csname X#1\endcsname }% \ifx\thisrefX\relax % If not defined, say something at least. @@ -6095,44 +6087,11 @@ where each line of input produces a line of output.} #2% Output the suffix in any case. } -% This is the macro invoked by entries in the aux file. Usually it's -% just a \def (we prepend XR to the control sequence name to avoid -% collisions). But if this is a float type, we have more work to do. +% This is the macro invoked by entries in the aux file. % -\def\xrdef#1#2{% - \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value. - % - % Was that xref control sequence that we just defined for a float? - \expandafter\iffloat\csname XR#1\endcsname - % it was a float, and we have the (safe) float type in \iffloattype. - \expandafter\let\expandafter\floatlist - \csname floatlist\iffloattype\endcsname - % - % Is this the first time we've seen this float type? - \expandafter\ifx\floatlist\relax - \toks0 = {\do}% yes, so just \do - \else - % had it before, so preserve previous elements in list. - \toks0 = \expandafter{\floatlist\do}% - \fi - % - % Remember this xref in the control sequence \floatlistFLOATTYPE, - % for later use in \listoffloats. - \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}% - \fi -} +\def\xrdef#1{\expandafter\gdef\csname X#1\endcsname} % Read the last existing aux file, if any. No error if none exists. -% -\def\tryauxfile{% - \openin 1 \jobname.aux - \ifeof 1 \else - \readauxfile - \global\havexrefstrue - \fi - \closein 1 -} - \def\readauxfile{\begingroup \catcode`\^^@=\other \catcode`\^^A=\other @@ -6191,16 +6150,7 @@ where each line of input produces a line of output.} \catcode`\%=\other \catcode`+=\other % avoid \+ for paranoia even though we've turned it off % - % This is to support \ in node names and titles, since the \ - % characters end up in a \csname. It's easier than - % leaving it active and making its active definition an actual \ - % character. What I don't understand is why it works in the *value* - % of the xrdef. Seems like it should be a catcode12 \, and that - % should not typeset properly. But it works, so I'm moving on for - % now. --karl, 15jan04. - \catcode`\\=\other - % - % Make the characters 128-255 be printing characters. + % Make the characters 128-255 be printing characters {% \count 1=128 \def\loop{% @@ -6210,17 +6160,31 @@ where each line of input produces a line of output.} }% }% % - % @ is our escape character in .aux files, and we need braces. + % Turn off \ as an escape so we do not lose on + % entries which were dumped with control sequences in their names. + % For example, @xrdef{$\leq $-fun}{page ...} made by @defun ^^ + % Reference to such entries still does not work the way one would wish, + % but at least they do not bomb out when the aux file is read in. + \catcode`\\=\other + % + % @ is our escape character in .aux files. \catcode`\{=1 \catcode`\}=2 \catcode`\@=0 % - \input \jobname.aux + \openin 1 \jobname.aux + \ifeof 1 \else + \closein 1 + \input \jobname.aux + \global\havexrefstrue + \global\warnedobstrue + \fi + % Open the new aux file. TeX will close it automatically at exit. + \openout\auxfile=\jobname.aux \endgroup} -\message{insertions,} -% including footnotes. +% Footnotes. \newcount \footnoteno @@ -6234,12 +6198,13 @@ where each line of input produces a line of output.} % @footnotestyle is meaningful for info output only. \let\footnotestyle=\comment +\let\ptexfootnote=\footnote + {\catcode `\@=11 % % Auto-number footnotes. Otherwise like plain. \gdef\footnote{% \let\indent=\ptexindent - \let\noindent=\ptexnoindent \global\advance\footnoteno by \@ne \edef\thisfootno{$^{\the\footnoteno}$}% % @@ -6257,12 +6222,17 @@ where each line of input produces a line of output.} % Don't bother with the trickery in plain.tex to not require the % footnote text as a parameter. Our footnotes don't need to be so general. % -% Oh yes, they do; otherwise, @ifset (and anything else that uses -% \parseargline) fails inside footnotes because the tokens are fixed when +% Oh yes, they do; otherwise, @ifset and anything else that uses +% \parseargline fail inside footnotes because the tokens are fixed when % the footnote is read. --karl, 16nov96. % +% The start of the footnote looks usually like this: +\gdef\startfootins{\insert\footins\bgroup} +% +% ... but this macro is redefined inside @multitable. +% \gdef\dofootnote{% - \insert\footins\bgroup + \startfootins % We want to typeset this text as a normal paragraph, even if the % footnote reference occurs in (for example) a display environment. % So reset some parameters. @@ -6298,66 +6268,40 @@ where each line of input produces a line of output.} } }%end \catcode `\@=11 -% In case a @footnote appears in a vbox, save the footnote text and create -% the real \insert just after the vbox finished. Otherwise, the insertion -% would be lost. -% Similarily, if a @footnote appears inside an alignment, save the footnote -% text to a box and make the \insert when a row of the table is finished. -% And the same can be done for other insert classes. --kasal, 16nov03. - -% Replace the \insert primitive by a cheating macro. -% Deeper inside, just make sure that the saved insertions are not spilled -% out prematurely. +% @| inserts a changebar to the left of the current line. It should +% surround any changed text. This approach does *not* work if the +% change spans more than two lines of output. To handle that, we would +% have adopt a much more difficult approach (putting marks into the main +% vertical list for the beginning and end of each change). % -\def\startsavinginserts{% - \ifx \insert\ptexinsert - \let\insert\saveinsert - \else - \let\checkinserts\relax - \fi +\def\|{% + % \vadjust can only be used in horizontal mode. + \leavevmode + % + % Append this vertical mode material after the current line in the output. + \vadjust{% + % We want to insert a rule with the height and depth of the current + % leading; that is exactly what \strutbox is supposed to record. + \vskip-\baselineskip + % + % \vadjust-items are inserted at the left edge of the type. So + % the \llap here moves out into the left-hand margin. + \llap{% + % + % For a thicker or thinner bar, change the `1pt'. + \vrule height\baselineskip width1pt + % + % This is the space between the bar and the text. + \hskip 12pt + }% + }% } -% This \insert replacement works for both \insert\footins{foo} and -% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}. +% For a final copy, take out the rectangles +% that mark overfull boxes (in case you have decided +% that the text looks ok even though it passes the margin). % -\def\saveinsert#1{% - \edef\next{\noexpand\savetobox \makeSAVEname#1}% - \afterassignment\next - % swallow the left brace - \let\temp = -} -\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}} -\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1} - -\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi} - -\def\placesaveins#1{% - \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname - {\box#1}% -} - -% eat @SAVE -- beware, all of them have catcode \other: -{ - \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-) - \gdef\gobblesave @SAVE{} -} - -% initialization: -\def\newsaveins #1{% - \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}% - \next -} -\def\newsaveinsX #1{% - \csname newbox\endcsname #1% - \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts - \checksaveins #1}% -} - -% initialize: -\let\checkinserts\empty -\newsaveins\footins -\newsaveins\margin - +\def\finalout{\overfullrule=0pt} % @image. We use the macros from epsf.tex to support this. % If epsf.tex is not installed and @image is used, we complain. @@ -6367,12 +6311,12 @@ where each line of input produces a line of output.} % undone and the next image would fail. \openin 1 = epsf.tex \ifeof 1 \else + \closein 1 % Do not bother showing banner with epsf.tex v2.7k (available in % doc/epsf.tex and on ctan). \def\epsfannounce{\toks0 = }% \input epsf.tex \fi -\closein 1 % % We will only complain once about lack of epsf.tex. \newif\ifwarnednoepsf @@ -6428,269 +6372,6 @@ where each line of input produces a line of output.} \endgroup} -% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables, -% etc. We don't actually implement floating yet, we always include the -% float "here". But it seemed the best name for the future. -% -\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish} - -% There may be a space before second and/or third parameter; delete it. -\def\eatcommaspace#1, {#1,} - -% #1 is the optional FLOATTYPE, the text label for this float, typically -% "Figure", "Table", "Example", etc. Can't contain commas. If omitted, -% this float will not be numbered and cannot be referred to. -% -% #2 is the optional xref label. Also must be present for the float to -% be referable. -% -% #3 is the optional positioning argument; for now, it is ignored. It -% will somehow specify the positions allowed to float to (here, top, bottom). -% -% We keep a separate counter for each FLOATTYPE, which we reset at each -% chapter-level command. -\let\resetallfloatnos=\empty -% -\def\dofloat#1,#2,#3,#4\finish{% - \let\thiscaption=\empty - \let\thisshortcaption=\empty - % - % don't lose footnotes inside @float. - % - % BEWARE: when the floats start float, we have to issue warning whenever an - % insert appears inside a float which could possibly float. --kasal, 26may04 - % - \startsavinginserts - % - % We can't be used inside a paragraph. - \par - % - \vtop\bgroup - \def\floattype{#1}% - \def\floatlabel{#2}% - \def\floatloc{#3}% we do nothing with this yet. - % - \ifx\floattype\empty - \let\safefloattype=\empty - \else - {% - % the floattype might have accents or other special characters, - % but we need to use it in a control sequence name. - \indexnofonts - \turnoffactive - \xdef\safefloattype{\floattype}% - }% - \fi - % - % If label is given but no type, we handle that as the empty type. - \ifx\floatlabel\empty \else - % We want each FLOATTYPE to be numbered separately (Figure 1, - % Table 1, Figure 2, ...). (And if no label, no number.) - % - \expandafter\getfloatno\csname\safefloattype floatno\endcsname - \global\advance\floatno by 1 - % - {% - % This magic value for \thissection is output by \setref as the - % XREFLABEL-title value. \xrefX uses it to distinguish float - % labels (which have a completely different output format) from - % node and anchor labels. And \xrdef uses it to construct the - % lists of floats. - % - \edef\thissection{\floatmagic=\safefloattype}% - \setref{\floatlabel}{Yfloat}% - }% - \fi - % - % start with \parskip glue, I guess. - \vskip\parskip - % - % Don't suppress indentation if a float happens to start a section. - \restorefirstparagraphindent -} - -% we have these possibilities: -% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap -% @float Foo,lbl & no caption: Foo 1.1 -% @float Foo & @caption{Cap}: Foo: Cap -% @float Foo & no caption: Foo -% @float ,lbl & Caption{Cap}: 1.1: Cap -% @float ,lbl & no caption: 1.1 -% @float & @caption{Cap}: Cap -% @float & no caption: -% -\def\Efloat{% - \let\floatident = \empty - % - % In all cases, if we have a float type, it comes first. - \ifx\floattype\empty \else \def\floatident{\floattype}\fi - % - % If we have an xref label, the number comes next. - \ifx\floatlabel\empty \else - \ifx\floattype\empty \else % if also had float type, need tie first. - \appendtomacro\floatident{\tie}% - \fi - % the number. - \appendtomacro\floatident{\chaplevelprefix\the\floatno}% - \fi - % - % Start the printed caption with what we've constructed in - % \floatident, but keep it separate; we need \floatident again. - \let\captionline = \floatident - % - \ifx\thiscaption\empty \else - \ifx\floatident\empty \else - \appendtomacro\captionline{: }% had ident, so need a colon between - \fi - % - % caption text. - \appendtomacro\captionline{\scanexp\thiscaption}% - \fi - % - % If we have anything to print, print it, with space before. - % Eventually this needs to become an \insert. - \ifx\captionline\empty \else - \vskip.5\parskip - \captionline - % - % Space below caption. - \vskip\parskip - \fi - % - % If have an xref label, write the list of floats info. Do this - % after the caption, to avoid chance of it being a breakpoint. - \ifx\floatlabel\empty \else - % Write the text that goes in the lof to the aux file as - % \floatlabel-lof. Besides \floatident, we include the short - % caption if specified, else the full caption if specified, else nothing. - {% - \atdummies \turnoffactive \otherbackslash - % since we read the caption text in the macro world, where ^^M - % is turned into a normal character, we have to scan it back, so - % we don't write the literal three characters "^^M" into the aux file. - \scanexp{% - \xdef\noexpand\gtemp{% - \ifx\thisshortcaption\empty - \thiscaption - \else - \thisshortcaption - \fi - }% - }% - \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident - \ifx\gtemp\empty \else : \gtemp \fi}}% - }% - \fi - \egroup % end of \vtop - % - % place the captured inserts - % - % BEWARE: when the floats start float, we have to issue warning whenever an - % insert appears inside a float which could possibly float. --kasal, 26may04 - % - \checkinserts -} - -% Append the tokens #2 to the definition of macro #1, not expanding either. -% -\def\appendtomacro#1#2{% - \expandafter\def\expandafter#1\expandafter{#1#2}% -} - -% @caption, @shortcaption -% -\def\caption{\docaption\thiscaption} -\def\shortcaption{\docaption\thisshortcaption} -\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption} -\def\defcaption#1#2{\egroup \def#1{#2}} - -% The parameter is the control sequence identifying the counter we are -% going to use. Create it if it doesn't exist and assign it to \floatno. -\def\getfloatno#1{% - \ifx#1\relax - % Haven't seen this figure type before. - \csname newcount\endcsname #1% - % - % Remember to reset this floatno at the next chap. - \expandafter\gdef\expandafter\resetallfloatnos - \expandafter{\resetallfloatnos #1=0 }% - \fi - \let\floatno#1% -} - -% \setref calls this to get the XREFLABEL-snt value. We want an @xref -% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we -% first read the @float command. -% -\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}% - -% Magic string used for the XREFLABEL-title value, so \xrefX can -% distinguish floats from other xref types. -\def\floatmagic{!!float!!} - -% #1 is the control sequence we are passed; we expand into a conditional -% which is true if #1 represents a float ref. That is, the magic -% \thissection value which we \setref above. -% -\def\iffloat#1{\expandafter\doiffloat#1==\finish} -% -% #1 is (maybe) the \floatmagic string. If so, #2 will be the -% (safe) float type for this float. We set \iffloattype to #2. -% -\def\doiffloat#1=#2=#3\finish{% - \def\temp{#1}% - \def\iffloattype{#2}% - \ifx\temp\floatmagic -} - -% @listoffloats FLOATTYPE - print a list of floats like a table of contents. -% -\parseargdef\listoffloats{% - \def\floattype{#1}% floattype - {% - % the floattype might have accents or other special characters, - % but we need to use it in a control sequence name. - \indexnofonts - \turnoffactive - \xdef\safefloattype{\floattype}% - }% - % - % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE. - \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax - \ifhavexrefs - % if the user said @listoffloats foo but never @float foo. - \message{\linenumber No `\safefloattype' floats to list.}% - \fi - \else - \begingroup - \leftskip=\tocindent % indent these entries like a toc - \let\do=\listoffloatsdo - \csname floatlist\safefloattype\endcsname - \endgroup - \fi -} - -% This is called on each entry in a list of floats. We're passed the -% xref label, in the form LABEL-title, which is how we save it in the -% aux file. We strip off the -title and look up \XRLABEL-lof, which -% has the text we're supposed to typeset here. -% -% Figures without xref labels will not be included in the list (since -% they won't appear in the aux file). -% -\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish} -\def\listoffloatsdoentry#1-title\finish{{% - % Can't fully expand XR#1-lof because it can contain anything. Just - % pass the control sequence. On the other hand, XR#1-pg is just the - % page number, and we want to fully expand that so we can get a link - % in pdf output. - \toksA = \expandafter{\csname XR#1-lof\endcsname}% - % - % use the same \entry macro we use to generate the TOC and index. - \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}% - \writeentry -}} - \message{localization,} % and i18n. @@ -6699,17 +6380,19 @@ where each line of input produces a line of output.} % properly. Single argument is the language abbreviation. % It would be nice if we could set up a hyphenation file here. % -\parseargdef\documentlanguage{% +\def\documentlanguage{\parsearg\dodocumentlanguage} +\def\dodocumentlanguage#1{% \tex % read txi-??.tex file in plain TeX. - % Read the file if it exists. - \openin 1 txi-#1.tex - \ifeof 1 - \errhelp = \nolanghelp - \errmessage{Cannot read language file txi-#1.tex}% - \else - \input txi-#1.tex - \fi - \closein 1 + % Read the file if it exists. + \openin 1 txi-#1.tex + \ifeof1 + \errhelp = \nolanghelp + \errmessage{Cannot read language file txi-#1.tex}% + \let\temp = \relax + \else + \def\temp{\input txi-#1.tex }% + \fi + \temp \endgroup } \newhelp\nolanghelp{The given language definition file cannot be found or @@ -6892,7 +6575,8 @@ should work if nowhere else does.} % Perhaps we should allow setting the margins, \topskip, \parskip, % and/or leading, also. Or perhaps we should compute them somehow. % -\parseargdef\pagesizes{\pagesizesyyy #1,,\finish} +\def\pagesizes{\parsearg\pagesizesxxx} +\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish} \def\pagesizesyyy#1,#2,#3\finish{{% \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi \globaldefs = 1 @@ -6939,8 +6623,8 @@ should work if nowhere else does.} \def\normalplus{+} \def\normaldollar{$}%$ font-lock fix -% This macro is used to make a character print one way in \tt -% (where it can probably be output as-is), and another way in other fonts, +% This macro is used to make a character print one way in ttfont +% where it can probably just be output, and another way in other fonts, % where something hairier probably needs to be done. % % #1 is what to print if we are indeed using \tt; #2 is what to print @@ -6988,6 +6672,13 @@ should work if nowhere else does.} \catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix +% Set up an active definition for =, but don't enable it most of the time. +{\catcode`\==\active +\global\def={{\tt \char 61}}} + +\catcode`+=\active +\catcode`\_=\active + % If a .fmt file is being used, characters that might appear in a file % name cannot be active until we have parsed the command line. % So turn them off again, and have \everyjob (or @setfilename) turn them on. @@ -6996,16 +6687,15 @@ should work if nowhere else does.} \catcode`\@=0 -% \backslashcurfont outputs one backslash character in current font, +% \rawbackslashxx outputs one backslash character in current font, % as in \char`\\. -\global\chardef\backslashcurfont=`\\ -\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work +\global\chardef\rawbackslashxx=`\\ -% \rawbackslash defines an active \ to do \backslashcurfont. +% \rawbackslash defines an active \ to do \rawbackslashxx. % \otherbackslash defines an active \ to be a literal `\' character with % catcode other. {\catcode`\\=\active - @gdef@rawbackslash{@let\=@backslashcurfont} + @gdef@rawbackslash{@let\=@rawbackslashxx} @gdef@otherbackslash{@let\=@realbackslash} } @@ -7013,7 +6703,7 @@ should work if nowhere else does.} {\catcode`\\=\other @gdef@realbackslash{\}} % \normalbackslash outputs one backslash in fixed width font. -\def\normalbackslash{{\tt\backslashcurfont}} +\def\normalbackslash{{\tt\rawbackslashxx}} \catcode`\\=\active @@ -7030,7 +6720,6 @@ should work if nowhere else does.} @let>=@normalgreater @let+=@normalplus @let$=@normaldollar %$ font-lock fix - @unsepspaces } % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of @@ -7070,6 +6759,10 @@ should work if nowhere else does.} @catcode`@# = @other @catcode`@% = @other +@c Set initial fonts. +@textfonts +@rm + @c Local variables: @c eval: (add-hook 'write-file-hooks 'time-stamp) @@ -7078,9 +6771,3 @@ should work if nowhere else does.} @c time-stamp-format: "%:y-%02m-%02d.%02H" @c time-stamp-end: "}" @c End: - -@c vim:sw=2: - -@ignore - arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115 -@end ignore |