diff options
Diffstat (limited to 'manual/texinfo.tex')
| -rw-r--r-- | manual/texinfo.tex | 174 |
1 files changed, 89 insertions, 85 deletions
diff --git a/manual/texinfo.tex b/manual/texinfo.tex index ac31d754aa..e8375a310a 100644 --- a/manual/texinfo.tex +++ b/manual/texinfo.tex @@ -35,7 +35,7 @@ % This automatically updates the version number based on RCS. \def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}} -\deftexinfoversion$Revision: 2.184 $ +\deftexinfoversion$Revision: 2.185 $ \message{Loading texinfo package [Version \texinfoversion]:} % If in a .fmt file, print the version number @@ -104,10 +104,9 @@ \hyphenation{eshell} % Margin to add to right of even pages, to left of odd pages. -\newdimen \bindingoffset \bindingoffset=0pt -\newdimen \normaloffset \normaloffset=\hoffset +\newdimen \bindingoffset +\newdimen \normaloffset \newdimen\pagewidth \newdimen\pageheight -\pagewidth=\hsize \pageheight=\vsize % Sometimes it is convenient to have everything in the transcript file % and nothing on the terminal. We don't just call \tracingall here, @@ -128,7 +127,7 @@ \newdimen\cornerlong \newdimen\cornerthick \newdimen \topandbottommargin \newdimen \outerhsize \newdimen \outervsize -\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks +\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks \outerhsize=7in %\outervsize=9.5in % Alternative @smallbook page size is 9.25in @@ -167,8 +166,8 @@ % \def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up {\escapechar=`\\\relax % makes sure backslash is used in output files. - \shipout - \vbox to \outervsize{\hsize=\outerhsize + \shipout + \vbox to \outervsize{\hsize=\outerhsize \vbox{\line{\ewtop\hfill\ewtop}} \nointerlineskip \line{\vbox{\moveleft\cornerthick\nstop} @@ -176,19 +175,19 @@ \vbox{\moveright\cornerthick\nstop}} \vskip \topandbottommargin \centerline{\ifodd\pageno\hskip\bindingoffset\fi - \vbox{ - {\let\hsize=\pagewidth \makeheadline} - \pagebody{#1} - {\let\hsize=\pagewidth \makefootline}} - \ifodd\pageno\else\hskip\bindingoffset\fi} - \vskip \topandbottommargin plus1fill minus1fill + \vbox{ + {\let\hsize=\pagewidth \makeheadline} + \pagebody{#1} + {\let\hsize=\pagewidth \makefootline}} + \ifodd\pageno\else\hskip\bindingoffset\fi} + \vskip \topandbottommargin plus1fill minus1fill \boxmaxdepth\cornerthick \line{\vbox{\moveleft\cornerthick\nsbot} \hfill \vbox{\moveright\cornerthick\nsbot}} \nointerlineskip \vbox{\line{\ewbot\hfill\ewbot}} - }} + }} \advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi} % @@ -873,9 +872,9 @@ where each line of input produces a line of output.} % @value{foo} gets the text saved in variable foo. % \def\value#1{\expandafter - \ifx\csname SET#1\endcsname\relax - {\{No value for ``#1''\}} - \else \csname SET#1\endcsname \fi} + \ifx\csname SET#1\endcsname\relax + {\{No value for ``#1''\}} + \else \csname SET#1\endcsname \fi} % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined % with @set. @@ -1038,7 +1037,7 @@ where each line of input produces a line of output.} \fi % Support font families that don't use the same naming scheme as CM. \def\rmshape{r} -\def\rmbshape{bx} %where the normal face is bold +\def\rmbshape{bx} %where the normal face is bold \def\bfshape{b} \def\bxshape{bx} \def\ttshape{tt} @@ -1125,9 +1124,9 @@ where each line of input produces a line of output.} % \setfont\ssectt\ttshape{10}{\magstep1} % \setfont\ssecsf\sfshape{10}{\magstep1} -%\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx. -%\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than -%\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1. +%\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx. +%\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than +%\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1. %\setfont\ssectt\ttshape{10}{1315} %\setfont\ssecsf\sfshape{10}{1315} @@ -1335,10 +1334,10 @@ where each line of input produces a line of output.} % Polish suppressed-l. --karl, 22sep96. %\def\l#1{{\li #1}\null} -\def\r#1{{\rm #1}} % roman font +\def\r#1{{\rm #1}} % roman font % Use of \lowercase was suggested. -\def\sc#1{{\smallcaps#1}} % smallcaps font -\def\ii#1{{\it #1}} % italic font +\def\sc#1{{\smallcaps#1}} % smallcaps font +\def\ii#1{{\it #1}} % italic font % @pounds{} is a sterling sign. \def\pounds{{\it\$}} @@ -1357,7 +1356,7 @@ where each line of input produces a line of output.} \def\shorttitlepage{\parsearg\shorttitlepagezzz} \def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% - \endgroup\page\hbox{}\page} + \endgroup\page\hbox{}\page} \def\titlepage{\begingroup \parindent=0pt \textfonts \let\subtitlerm=\tenrm @@ -1374,9 +1373,9 @@ where each line of input produces a line of output.} % Now you can print the title using @title. \def\title{\parsearg\titlezzz}% \def\titlezzz##1{\leftline{\titlefont{##1}} - % print a rule at the page bottom also. - \finishedtitlepagefalse - \vskip4pt \hrule height 4pt width \hsize \vskip4pt}% + % print a rule at the page bottom also. + \finishedtitlepagefalse + \vskip4pt \hrule height 4pt width \hsize \vskip4pt}% % No rule at page bottom unless we print one at the top with @title. \finishedtitlepagetrue % @@ -1394,7 +1393,7 @@ where each line of input produces a line of output.} \let\oldpage = \page \def\page{% \iffinishedtitlepage\else - \finishtitlepage + \finishtitlepage \fi \oldpage \let\page = \oldpage @@ -1482,12 +1481,12 @@ where each line of input produces a line of output.} % }% unbind the catcode of @. -% @headings double turns headings on for double-sided printing. -% @headings single turns headings on for single-sided printing. -% @headings off turns them off. -% @headings on same as @headings double, retained for compatibility. -% @headings after turns on double-sided headings after this page. -% @headings doubleafter turns on double-sided headings after this page. +% @headings double turns headings on for double-sided printing. +% @headings single turns headings on for single-sided printing. +% @headings off turns them off. +% @headings on same as @headings double, retained for compatibility. +% @headings after turns on double-sided headings after this page. +% @headings doubleafter turns on double-sided headings after this page. % @headings singleafter turns on single-sided headings after this page. % By default, they are off at the start of a document, % and turned `on' after @end titlepage. @@ -2084,14 +2083,14 @@ width0pt\relax} \fi % It automatically defines \fooindex such that % \fooindex ...rest of line... puts an entry in the index foo. % It also defines \fooindfile to be the number of the output channel for -% the file that accumulates this index. The file's extension is foo. +% the file that accumulates this index. The file's extension is foo. % The name of an index should be no more than 2 characters long % for the sake of vms. \def\newindex #1{ \expandafter\newwrite \csname#1indfile\endcsname% Define number for output file -\openout \csname#1indfile\endcsname \jobname.#1 % Open the file -\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex +\openout \csname#1indfile\endcsname \jobname.#1 % Open the file +\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex \noexpand\doindex {#1}} } @@ -2103,8 +2102,8 @@ width0pt\relax} \fi \def\newcodeindex #1{ \expandafter\newwrite \csname#1indfile\endcsname% Define number for output file -\openout \csname#1indfile\endcsname \jobname.#1 % Open the file -\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex +\openout \csname#1indfile\endcsname \jobname.#1 % Open the file +\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex \noexpand\docodeindex {#1}} } @@ -2115,7 +2114,7 @@ width0pt\relax} \fi \def\synindex #1 #2 {% \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname \expandafter\let\csname#1indfile\endcsname=\synindexfoo -\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex +\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex \noexpand\doindex {#2}}% } @@ -2124,7 +2123,7 @@ width0pt\relax} \fi \def\syncodeindex #1 #2 {% \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname \expandafter\let\csname#1indfile\endcsname=\synindexfoo -\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex +\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex \noexpand\docodeindex {#2}}% } @@ -2952,10 +2951,10 @@ width0pt\relax} \fi % NOTE on use of \vbox for chapter headings, section headings, and % such: -% 1) We use \vbox rather than the earlier \line to permit -% overlong headings to fold. -% 2) \hyphenpenalty is set to 10000 because hyphenation in a -% heading is obnoxious; this forbids it. +% 1) We use \vbox rather than the earlier \line to permit +% overlong headings to fold. +% 2) \hyphenpenalty is set to 10000 because hyphenation in a +% heading is obnoxious; this forbids it. % 3) Likewise, headings look best if no \parindent is used, and % if justification is not attempted. Hence \raggedright. @@ -3134,12 +3133,12 @@ width0pt\relax} \fi \contentsalignmacro \immediate\closeout \contentsfile \ifnum \pageno>0 - \pageno = -1 % Request roman numbered pages. + \pageno = -1 % Request roman numbered pages. \fi % Don't need to put `Contents' or `Short Contents' in the headline. % It is abundantly clear what they are. \unnumbchapmacro{#1}\def\thischapter{}% - \begingroup % Set up to handle contents files properly. + \begingroup % Set up to handle contents files properly. \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 \catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi \raggedbottom % Worry more about breakpoints than the bottom. @@ -3418,50 +3417,50 @@ width0pt\relax} \fi \def\cbl{{\circle\char'012\hskip -6pt}} \def\cbr{{\hskip 6pt\circle\char'011}} \def\carttop{\hbox to \cartouter{\hskip\lskip - \ctl\leaders\hrule height\circthick\hfil\ctr - \hskip\rskip}} + \ctl\leaders\hrule height\circthick\hfil\ctr + \hskip\rskip}} \def\cartbot{\hbox to \cartouter{\hskip\lskip - \cbl\leaders\hrule height\circthick\hfil\cbr - \hskip\rskip}} + \cbl\leaders\hrule height\circthick\hfil\cbr + \hskip\rskip}} % \newskip\lskip\newskip\rskip \long\def\cartouche{% \begingroup - \lskip=\leftskip \rskip=\rightskip - \leftskip=0pt\rightskip=0pt %we want these *outside*. - \cartinner=\hsize \advance\cartinner by-\lskip - \advance\cartinner by-\rskip - \cartouter=\hsize - \advance\cartouter by 18pt % allow for 3pt kerns on either -% side, and for 6pt waste from -% each corner char - \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip - % Flag to tell @lisp, etc., not to narrow margin. - \let\nonarrowing=\comment - \vbox\bgroup - \baselineskip=0pt\parskip=0pt\lineskip=0pt - \carttop - \hbox\bgroup - \hskip\lskip - \vrule\kern3pt - \vbox\bgroup - \hsize=\cartinner - \kern3pt - \begingroup - \baselineskip=\normbskip - \lineskip=\normlskip - \parskip=\normpskip - \vskip -\parskip + \lskip=\leftskip \rskip=\rightskip + \leftskip=0pt\rightskip=0pt %we want these *outside*. + \cartinner=\hsize \advance\cartinner by-\lskip + \advance\cartinner by-\rskip + \cartouter=\hsize + \advance\cartouter by 18pt % allow for 3pt kerns on either +% side, and for 6pt waste from +% each corner char + \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip + % Flag to tell @lisp, etc., not to narrow margin. + \let\nonarrowing=\comment + \vbox\bgroup + \baselineskip=0pt\parskip=0pt\lineskip=0pt + \carttop + \hbox\bgroup + \hskip\lskip + \vrule\kern3pt + \vbox\bgroup + \hsize=\cartinner + \kern3pt + \begingroup + \baselineskip=\normbskip + \lineskip=\normlskip + \parskip=\normpskip + \vskip -\parskip \def\Ecartouche{% - \endgroup - \kern3pt - \egroup - \kern3pt\vrule - \hskip\rskip - \egroup - \cartbot - \egroup + \endgroup + \kern3pt + \egroup + \kern3pt\vrule + \hskip\rskip + \egroup + \cartbot + \egroup \endgroup }} @@ -4504,6 +4503,11 @@ width0pt\relax} \fi \global\pageheight=\vsize } +\bindingoffset=0pt +\normaloffset=\hoffset +\pagewidth=\hsize +\pageheight=\vsize + % Allow control of the text dimensions. Parameters in order: textheight; % textwidth; voffset; hoffset; binding offset; topskip. % All require a dimension; |