arm: Remove ioperm/iopl/inb/inw/inl/outb/outw/outl support

Linux only supports the required ISA sysctls on StrongARM devices,
which are armv4 and no longer tested during glibc development
and probably bit-rotted by this point.  (No reported test results,
and the last discussion of armv4 support was in the glibc 2.19
release notes.)

3 files changed, 33 insertions, 176 deletions

diff --git a/sysdeps/unix/sysv/linux/arm/Makefile b/sysdeps/unix/sysv/linux/arm/Makefile
index 4adc35de04..d7a2f6a8a7 100644
--- a/sysdeps/unix/sysv/linux/arm/Makefile
+++ b/sysdeps/unix/sysv/linux/arm/Makefile
@@ -5,7 +5,7 @@ endif
 
 ifeq ($(subdir),misc)
 sysdep_routines += ioperm
-sysdep_headers += sys/elf.h sys/io.h
+sysdep_headers += sys/elf.h
 endif
 
 ifeq ($(subdir),signal)
diff --git a/sysdeps/unix/sysv/linux/arm/ioperm.c b/sysdeps/unix/sysv/linux/arm/ioperm.c
index 0e338c4504..e832a6605e 100644
--- a/sysdeps/unix/sysv/linux/arm/ioperm.c
+++ b/sysdeps/unix/sysv/linux/arm/ioperm.c
@@ -17,167 +17,71 @@
    License along with the GNU C Library.  If not, see
    <http://www.gnu.org/licenses/>.  */
 
-/* I/O port access on the ARM is something of a fiction.  What we do is to
-   map an appropriate area of /dev/mem into user space so that a program
-   can blast away at the hardware in such a way as to generate I/O cycles
-   on the bus.  To insulate user code from dependencies on particular
-   hardware we don't allow calls to inb() and friends to be inlined, but
-   force them to come through code in here every time.  Performance-critical
-   registers tend to be memory mapped these days so this should be no big
-   problem.  */
-
-/* Once upon a time this file used mprotect to enable and disable
-   access to particular areas of I/O space.  Unfortunately the
-   mprotect syscall also has the side effect of enabling caching for
-   the area affected (this is a kernel limitation).  So we now just
-   enable all the ports all of the time.  */
-
-#include <errno.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-#include <sys/types.h>
-#include <sys/mman.h>
-
-#include <sys/sysctl.h>
-
-#define MAX_PORT	0x10000
-
-static struct {
-  unsigned long int	base;
-  unsigned long int	io_base;
-  unsigned int		shift;
-  unsigned int		initdone;	/* since all the above could be 0 */
-} io;
-
-#define IO_ADDR(port)	(io.base + ((port) << io.shift))
-
-/*
- * Initialize I/O system.  The io_bae and port_shift values are fetched
- * using sysctl (CTL_BUS, CTL_BUS_ISA, ISA_*).
- */
-
-static int
-init_iosys (void)
-{
-  static int iobase_name[] = { CTL_BUS, CTL_BUS_ISA, BUS_ISA_PORT_BASE };
-  static int ioshift_name[] = { CTL_BUS, CTL_BUS_ISA, BUS_ISA_PORT_SHIFT };
-  size_t len = sizeof (io.base);
-
-  if (! __sysctl (iobase_name, 3, &io.io_base, &len, NULL, 0)
-      && ! __sysctl (ioshift_name, 3, &io.shift, &len, NULL, 0))
-    {
-      io.initdone = 1;
-      return 0;
-    }
-
-  /* sysctl has failed... */
-  __set_errno (ENODEV);
-  return -1;
-}
+#include <shlib-compat.h>
+
+#if SHLIB_COMPAT (libc, GLIBC_2_4, GLIBC_2_30)
+# include <errno.h>
 
 int
-_ioperm (unsigned long int from, unsigned long int num, int turn_on)
+ioperm (unsigned long int from, unsigned long int num, int turn_on)
 {
-  if (! io.initdone && init_iosys () < 0)
-    return -1;
-
-  /* this test isn't as silly as it may look like; consider overflows! */
-  if (from >= MAX_PORT || from + num > MAX_PORT)
-    {
-      __set_errno (EINVAL);
-      return -1;
-    }
-
-  if (turn_on)
-    {
-      if (! io.base)
-	{
-	  int fd;
-
-	  fd = __open ("/dev/mem", O_RDWR);
-	  if (fd < 0)
-	    return -1;
-
-	  io.base =
-	    (unsigned long int) __mmap (0, MAX_PORT << io.shift,
-					PROT_READ | PROT_WRITE,
-					MAP_SHARED, fd, io.io_base);
-	  __close (fd);
-	  if ((long) io.base == -1)
-	    return -1;
-	}
-    }
-
-  return 0;
+  __set_errno (ENOSYS);
+  return -1;
 }
-
+compat_symbol (libc, ioperm, ioperm, GLIBC_2_4);
 
 int
-_iopl (unsigned int level)
+iopl (unsigned int level)
 {
-    if (level > 3)
-      {
-	__set_errno (EINVAL);
-	return -1;
-      }
-    if (level)
-      {
-	return _ioperm (0, MAX_PORT, 1);
-      }
-    return 0;
+  __set_errno (ENOSYS);
+  return -1;
 }
+compat_symbol (libc, iopl, iopl, GLIBC_2_4);
+
 
+/* The remaining functions do not have any way to indicate failure.
+   However, it is only valid to call them after calling ioperm/iopl,
+   which will have indicated failure.  */
 
 void
-_outb (unsigned char b, unsigned long int port)
+outb (unsigned char b, unsigned long int port)
 {
-  *((volatile unsigned char *)(IO_ADDR (port))) = b;
 }
-
+compat_symbol (libc, outb, outb, GLIBC_2_4);
 
 void
-_outw (unsigned short b, unsigned long int port)
+outw (unsigned short b, unsigned long int port)
 {
-  *((volatile unsigned short *)(IO_ADDR (port))) = b;
 }
-
+compat_symbol (libc, outw, outw, GLIBC_2_4);
 
 void
-_outl (unsigned int b, unsigned long int port)
+outl (unsigned int b, unsigned long int port)
 {
-  *((volatile unsigned long *)(IO_ADDR (port))) = b;
 }
-
+compat_symbol (libc, outl, outl, GLIBC_2_4);
 
 unsigned int
-_inb (unsigned long int port)
+inb (unsigned long int port)
 {
-  return *((volatile unsigned char *)(IO_ADDR (port)));
+  return 0;
 }
+compat_symbol (libc, inb, inb, GLIBC_2_4);
 
 
 unsigned int
-_inw (unsigned long int port)
+inw (unsigned long int port)
 {
-  return *((volatile unsigned short *)(IO_ADDR (port)));
+  return 0;
 }
+compat_symbol (libc, inw, inw, GLIBC_2_4);
 
 
 unsigned int
-_inl (unsigned long int port)
+inl (unsigned long int port)
 {
-  return *((volatile unsigned long *)(IO_ADDR (port)));
+  return 0;
 }
+compat_symbol (libc, inl, inl, GLIBC_2_4);
 
-weak_alias (_ioperm, ioperm);
-weak_alias (_iopl, iopl);
-weak_alias (_inb, inb);
-weak_alias (_inw, inw);
-weak_alias (_inl, inl);
-weak_alias (_outb, outb);
-weak_alias (_outw, outw);
-weak_alias (_outl, outl);
+#endif /* SHLIB_COMAT */
diff --git a/sysdeps/unix/sysv/linux/arm/sys/io.h b/sysdeps/unix/sysv/linux/arm/sys/io.h
deleted file mode 100644
index 6f5ae5079a..0000000000
--- a/sysdeps/unix/sysv/linux/arm/sys/io.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Copyright (C) 1996-2019 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library.  If not, see
-   <http://www.gnu.org/licenses/>.  */
-
-#ifndef	_SYS_IO_H
-
-#define	_SYS_IO_H	1
-#include <features.h>
-
-__BEGIN_DECLS
-
-/* If TURN_ON is TRUE, request for permission to do direct i/o on the
-   port numbers in the range [FROM,FROM+NUM-1].  Otherwise, turn I/O
-   permission off for that range.  This call requires root privileges.  */
-extern int ioperm (unsigned long int __from, unsigned long int __num,
-		   int __turn_on) __THROW;
-
-/* Set the I/O privilege level to LEVEL.  If LEVEL is nonzero,
-   permission to access any I/O port is granted.  This call requires
-   root privileges. */
-extern int iopl (int __level) __THROW;
-
-/* The functions that actually perform reads and writes.  */
-extern unsigned char inb (unsigned long int __port) __THROW;
-extern unsigned short int inw (unsigned long int __port) __THROW;
-extern unsigned long int inl (unsigned long int __port) __THROW;
-
-extern void outb (unsigned char __value, unsigned long int __port) __THROW;
-extern void outw (unsigned short __value, unsigned long int __port) __THROW;
-extern void outl (unsigned long __value, unsigned long int __port) __THROW;
-
-__END_DECLS
-
-#endif /* _SYS_IO_H */