Fix misspellings in sysdeps/x86_64 -- BZ 25337.

Applying this commit results in bit-identical rebuild of libc.so.6
math/libm.so.6 elf/ld-linux-x86-64.so.2 mathvec/libmvec.so.1

Reviewed-by: Florian Weimer <fweimer@redhat.com>

37 files changed, 105 insertions, 105 deletions

diff --git a/sysdeps/x86_64/dl-trampoline.h b/sysdeps/x86_64/dl-trampoline.h
index f8ad31af88..70ba6ec6f5 100644
--- a/sysdeps/x86_64/dl-trampoline.h
+++ b/sysdeps/x86_64/dl-trampoline.h
@@ -28,11 +28,11 @@
 # undef BASE
 
 # if (STATE_SAVE_ALIGNMENT % 16) != 0
-#  error STATE_SAVE_ALIGNMENT must be multples of 16
+#  error STATE_SAVE_ALIGNMENT must be multiple of 16
 # endif
 
 # if (STATE_SAVE_OFFSET % STATE_SAVE_ALIGNMENT) != 0
-#  error STATE_SAVE_OFFSET must be multples of STATE_SAVE_ALIGNMENT
+#  error STATE_SAVE_OFFSET must be multiple of STATE_SAVE_ALIGNMENT
 # endif
 
 # if DL_RUNTIME_RESOLVE_REALIGN_STACK
@@ -43,7 +43,7 @@
 /* Use fxsave to save XMM registers.  */
 #   define REGISTER_SAVE_AREA	(512 + STATE_SAVE_OFFSET)
 #   if (REGISTER_SAVE_AREA % 16) != 0
-#    error REGISTER_SAVE_AREA must be multples of 16
+#    error REGISTER_SAVE_AREA must be multiple of 16
 #   endif
 #  endif
 # else
@@ -57,7 +57,7 @@
 #  define LOCAL_STORAGE_AREA	REGISTER_SAVE_AREA
 #  define BASE			rsp
 #  if (REGISTER_SAVE_AREA % 16) != 8
-#   error REGISTER_SAVE_AREA must be odd multples of 8
+#   error REGISTER_SAVE_AREA must be odd multiple of 8
 #  endif
 # endif
 
@@ -161,7 +161,7 @@ _dl_runtime_resolve:
 
 #if !defined PROF && defined _dl_runtime_profile
 # if (LR_VECTOR_OFFSET % VEC_SIZE) != 0
-#  error LR_VECTOR_OFFSET must be multples of VEC_SIZE
+#  error LR_VECTOR_OFFSET must be multiple of VEC_SIZE
 # endif
 
 	.globl _dl_runtime_profile
@@ -173,7 +173,7 @@ _dl_runtime_profile:
 	cfi_adjust_cfa_offset(16) # Incorporate PLT
 	_CET_ENDBR
 	/* The La_x86_64_regs data structure pointed to by the
-	   fourth paramater must be VEC_SIZE-byte aligned.  This must
+	   fourth parameter must be VEC_SIZE-byte aligned.  This must
 	   be explicitly enforced.  We have the set up a dynamically
 	   sized stack frame.  %rbx points to the top half which
 	   has a fixed size and preserves the original stack pointer.  */
diff --git a/sysdeps/x86_64/fpu/feupdateenv.c b/sysdeps/x86_64/fpu/feupdateenv.c
index 129445e660..96977a114f 100644
--- a/sysdeps/x86_64/fpu/feupdateenv.c
+++ b/sysdeps/x86_64/fpu/feupdateenv.c
@@ -31,7 +31,7 @@ __feupdateenv (const fenv_t *envp)
   /* Install new environment.  */
   __fesetenv (envp);
 
-  /* Raise the saved exception.  Incidently for us the implementation
+  /* Raise the saved exception.  Incidentally for us the implementation
      defined format of the values in objects of type fexcept_t is the
      same as the ones specified using the FE_* constants.  */
   __feraiseexcept ((int) temp);
diff --git a/sysdeps/x86_64/multiarch/ifunc-strcasecmp.h b/sysdeps/x86_64/multiarch/ifunc-strcasecmp.h
index 10ae5d6994..89d366b7b5 100644
--- a/sysdeps/x86_64/multiarch/ifunc-strcasecmp.h
+++ b/sysdeps/x86_64/multiarch/ifunc-strcasecmp.h
@@ -1,4 +1,4 @@
-/* Common definition for strcasecmp famly ifunc selections.
+/* Common definition for strcasecmp family ifunc selections.
    All versions must be listed in ifunc-impl-list.c.
    Copyright (C) 2017-2023 Free Software Foundation, Inc.
    This file is part of the GNU C Library.
diff --git a/sysdeps/x86_64/multiarch/memchr-evex.S b/sysdeps/x86_64/multiarch/memchr-evex.S
index 764a419b68..35347daa05 100644
--- a/sysdeps/x86_64/multiarch/memchr-evex.S
+++ b/sysdeps/x86_64/multiarch/memchr-evex.S
@@ -440,13 +440,13 @@ L(loop_4x_vec):
 	   ymm0-15 is used at all is because there is no EVEX encoding
 	   vpcmpeq and with vpcmpeq this loop can be performed more
 	   efficiently.  The non-vzeroupper version is safe for RTM
-	   while the vzeroupper version should be prefered if RTM are
+	   while the vzeroupper version should be preferred if RTM are
 	   not supported.   Which loop version we use is determined by
 	   USE_TERN_IN_LOOP.  */
 
 # if USE_TERN_IN_LOOP
 	/* Since vptern can only take 3x vectors fastest to do 1 vec
-	   seperately with EVEX vpcmp.  */
+	   separately with EVEX vpcmp.  */
 #  ifdef USE_AS_WMEMCHR
 	/* vptern can only accept masks for epi32/epi64 so can only save
 	   instruction using not equals mask on vptern with wmemchr.
@@ -539,7 +539,7 @@ L(last_vec_x1_novzero):
 
 # if CHAR_PER_VEC == 64
 	/* Since we can't combine the last 2x VEC when CHAR_PER_VEC ==
-	   64 it needs a seperate return label.  */
+	   64 it needs a separate return label.  */
 	.p2align 4,, 4
 L(last_vec_x2):
 L(last_vec_x2_novzero):
@@ -579,8 +579,8 @@ L(loop_vec_ret):
 	   (only if used VEX encoded loop).  */
 	COND_VZEROUPPER
 
-	/* Seperate logic for CHAR_PER_VEC == 64 vs the rest.  For
-	   CHAR_PER_VEC we test the last 2x VEC seperately, for
+	/* Separate logic for CHAR_PER_VEC == 64 vs the rest.  For
+	   CHAR_PER_VEC we test the last 2x VEC separately, for
 	   CHAR_PER_VEC <= 32 we can combine the results from the 2x
 	   VEC in a single GPR.  */
 # if CHAR_PER_VEC == 64
diff --git a/sysdeps/x86_64/multiarch/memcmp-avx2-movbe.S b/sysdeps/x86_64/multiarch/memcmp-avx2-movbe.S
index b81d9f7dd8..61dbfe79cf 100644
--- a/sysdeps/x86_64/multiarch/memcmp-avx2-movbe.S
+++ b/sysdeps/x86_64/multiarch/memcmp-avx2-movbe.S
@@ -29,7 +29,7 @@
    3. Use xmm vector compare when size >= 4 bytes for memcmp or
       size >= 8 bytes for wmemcmp.
    4. Optimistically compare up to first 4 * VEC_SIZE one at a
-      to check for early mismatches. Only do this if its guranteed the
+      to check for early mismatches. Only do this if its guaranteed the
       work is not wasted.
    5. If size is 8 * VEC_SIZE or less, unroll the loop.
    6. Compare 4 * VEC_SIZE at a time with the aligned first memory
@@ -66,7 +66,7 @@
 
 /* Warning!
            wmemcmp has to use SIGNED comparison for elements.
-           memcmp has to use UNSIGNED comparison for elemnts.
+           memcmp has to use UNSIGNED comparison for elements.
 */
 
 	.section SECTION(.text),"ax",@progbits
diff --git a/sysdeps/x86_64/multiarch/memcmp-evex-movbe.S b/sysdeps/x86_64/multiarch/memcmp-evex-movbe.S
index a63db75b35..7e6fed9b63 100644
--- a/sysdeps/x86_64/multiarch/memcmp-evex-movbe.S
+++ b/sysdeps/x86_64/multiarch/memcmp-evex-movbe.S
@@ -30,7 +30,7 @@
    3. Use xmm vector compare when size >= 4 bytes for memcmp or
       size >= 8 bytes for wmemcmp.
    4. Optimistically compare up to first 4 * CHAR_PER_VEC one at a
-      to check for early mismatches. Only do this if its guranteed the
+      to check for early mismatches. Only do this if its guaranteed the
       work is not wasted.
    5. If size is 8 * VEC_SIZE or less, unroll the loop.
    6. Compare 4 * VEC_SIZE at a time with the aligned first memory
@@ -90,7 +90,7 @@ Latency:
 
 /* Warning!
            wmemcmp has to use SIGNED comparison for elements.
-           memcmp has to use UNSIGNED comparison for elemnts.
+           memcmp has to use UNSIGNED comparison for elements.
 */
 
 	.section SECTION(.text), "ax", @progbits
@@ -105,7 +105,7 @@ ENTRY_P2ALIGN (MEMCMP, 6)
 	/* Fall through for [0, VEC_SIZE] as its the hottest.  */
 	ja	L(more_1x_vec)
 
-	/* Create mask of bytes that are guranteed to be valid because
+	/* Create mask of bytes that are guaranteed to be valid because
 	   of length (edx). Using masked movs allows us to skip checks
 	   for page crosses/zero size.  */
 	mov	$-1, %VRAX
@@ -365,7 +365,7 @@ L(loop_4x_vec):
 	/* Load regardless of branch.  */
 	VMOVU	(VEC_SIZE * 2)(%rsi, %rdx), %VMM(3)
 
-	/* Seperate logic as we can only use testb for VEC_SIZE == 64.
+	/* Separate logic as we can only use testb for VEC_SIZE == 64.
 	 */
 # if VEC_SIZE == 64
 	testb	%dil, %dil
diff --git a/sysdeps/x86_64/multiarch/memcmp-sse2.S b/sysdeps/x86_64/multiarch/memcmp-sse2.S
index 305bd02920..77174e7c64 100644
--- a/sysdeps/x86_64/multiarch/memcmp-sse2.S
+++ b/sysdeps/x86_64/multiarch/memcmp-sse2.S
@@ -410,7 +410,7 @@ L(ret_nonzero_vec_start_4_5):
 	.p2align 4,, 8
 L(ret_nonzero_vec_end_1):
 	pmovmskb %xmm1, %ecx
-	/* High 16 bits of eax guranteed to be all ones. Rotate them in
+	/* High 16 bits of eax guaranteed to be all ones. Rotate them in
 	   to we can do `or + not` with just `xor`.  */
 	rorl	$16, %eax
 	xorl	%ecx, %eax
@@ -562,7 +562,7 @@ L(ret_nonzero_loop):
 	sall	$(VEC_SIZE * 1), %edx
 	leal	1(%rcx, %rdx), %edx
 	pmovmskb %xmm2, %ecx
-	/* High 16 bits of eax guranteed to be all ones. Rotate them in
+	/* High 16 bits of eax guaranteed to be all ones. Rotate them in
 	   to we can do `or + not` with just `xor`.  */
 	rorl	$16, %eax
 	xorl	%ecx, %eax
diff --git a/sysdeps/x86_64/multiarch/memcmpeq-avx2.S b/sysdeps/x86_64/multiarch/memcmpeq-avx2.S
index 4b013c5523..f6e39ca0bd 100644
--- a/sysdeps/x86_64/multiarch/memcmpeq-avx2.S
+++ b/sysdeps/x86_64/multiarch/memcmpeq-avx2.S
@@ -26,7 +26,7 @@
       and loading from either s1 or s2 would cause a page cross.
    2. Use xmm vector compare when size >= 8 bytes.
    3. Optimistically compare up to first 4 * VEC_SIZE one at a
-      to check for early mismatches. Only do this if its guranteed the
+      to check for early mismatches. Only do this if its guaranteed the
       work is not wasted.
    4. If size is 8 * VEC_SIZE or less, unroll the loop.
    5. Compare 4 * VEC_SIZE at a time with the aligned first memory
@@ -302,7 +302,7 @@ L(between_9_15):
 	movq	-8(%rsi, %rdx), %rdi
 	subq	%rdi, %rcx
 	orq	%rcx, %rax
-	/* edx is guranteed to be a non-zero int.  */
+	/* edx is guaranteed to be a non-zero int.  */
 	cmovnz	%edx, %eax
 	ret
 
diff --git a/sysdeps/x86_64/multiarch/memcmpeq-evex.S b/sysdeps/x86_64/multiarch/memcmpeq-evex.S
index 7ae3e3c8c9..3666f649cd 100644
--- a/sysdeps/x86_64/multiarch/memcmpeq-evex.S
+++ b/sysdeps/x86_64/multiarch/memcmpeq-evex.S
@@ -26,7 +26,7 @@
       and loading from either s1 or s2 would cause a page cross.
    2. Use xmm vector compare when size >= 8 bytes.
    3. Optimistically compare up to first 4 * VEC_SIZE one at a
-      to check for early mismatches. Only do this if its guranteed the
+      to check for early mismatches. Only do this if its guaranteed the
       work is not wasted.
    4. If size is 8 * VEC_SIZE or less, unroll the loop.
    5. Compare 4 * VEC_SIZE at a time with the aligned first memory
@@ -97,7 +97,7 @@ ENTRY_P2ALIGN (MEMCMPEQ, 6)
 	/* Fall through for [0, VEC_SIZE] as its the hottest.  */
 	ja	L(more_1x_vec)
 
-	/* Create mask of bytes that are guranteed to be valid because
+	/* Create mask of bytes that are guaranteed to be valid because
 	   of length (edx). Using masked movs allows us to skip checks
 	   for page crosses/zero size.  */
 	mov	$-1, %VRAX
@@ -253,7 +253,7 @@ L(loop_4x_vec):
 	   oring with VEC(4). Result is stored in VEC(4).  */
 	vpternlogd $0xf6, (VEC_SIZE * 2)(%rdx), %VMM(3), %VMM(4)
 
-	/* Seperate logic as we can only use testb for VEC_SIZE == 64.
+	/* Separate logic as we can only use testb for VEC_SIZE == 64.
 	 */
 # if VEC_SIZE == 64
 	testb	%dil, %dil
diff --git a/sysdeps/x86_64/multiarch/memmove-ssse3.S b/sysdeps/x86_64/multiarch/memmove-ssse3.S
index ded86bd1e5..460b0ec044 100644
--- a/sysdeps/x86_64/multiarch/memmove-ssse3.S
+++ b/sysdeps/x86_64/multiarch/memmove-ssse3.S
@@ -231,7 +231,7 @@ L(end_loop_fwd):
 	movups	%xmm7, 48(%r8)
 	ret
 
-	/* Extactly 64 bytes if `jmp L(end_loop_fwd)` is long encoding.
+	/* Exactly 64 bytes if `jmp L(end_loop_fwd)` is long encoding.
 	   60 bytes otherwise.  */
 # define ALIGNED_LOOP_FWD(align_by);	\
 	.p2align 6;	\
@@ -368,7 +368,7 @@ L(end_loop_bkwd):
 	ret
 
 
-	/* Extactly 64 bytes if `jmp L(end_loop_bkwd)` is long encoding.
+	/* Exactly 64 bytes if `jmp L(end_loop_bkwd)` is long encoding.
 	   60 bytes otherwise.  */
 # define ALIGNED_LOOP_BKWD(align_by);	\
 	.p2align 6;	\
diff --git a/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S b/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
index d1b92785b0..51eb622bc8 100644
--- a/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
+++ b/sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S
@@ -445,7 +445,7 @@ L(more_8x_vec_check):
 	shrq	$63, %r8
 	/* Get 4k difference dst - src.  */
 	andl	$(PAGE_SIZE - 256), %ecx
-	/* If r8 is non-zero must do foward for correctness. Otherwise
+	/* If r8 is non-zero must do forward for correctness. Otherwise
 	   if ecx is non-zero there is 4k False Alaising so do backward
 	   copy.  */
 	addl	%r8d, %ecx
@@ -460,7 +460,7 @@ L(more_8x_vec_forward):
 	/* First vec was already loaded into VEC(0).  */
 	VMOVU	-VEC_SIZE(%rsi, %rdx), %VMM(5)
 	VMOVU	-(VEC_SIZE * 2)(%rsi, %rdx), %VMM(6)
-	/* Save begining of dst.  */
+	/* Save beginning of dst.  */
 	movq	%rdi, %rcx
 	/* Align dst to VEC_SIZE - 1.  */
 	orq	$(VEC_SIZE - 1), %rdi
@@ -517,7 +517,7 @@ L(more_8x_vec_backward):
 	/* First vec was also loaded into VEC(0).  */
 	VMOVU	VEC_SIZE(%rsi), %VMM(5)
 	VMOVU	(VEC_SIZE * 2)(%rsi), %VMM(6)
-	/* Begining of region for 4x backward copy stored in rcx.  */
+	/* Beginning of region for 4x backward copy stored in rcx.  */
 	leaq	(VEC_SIZE * -4 + -1)(%rdi, %rdx), %rcx
 	VMOVU	(VEC_SIZE * 3)(%rsi), %VMM(7)
 	VMOVU	-VEC_SIZE(%rsi, %rdx), %VMM(8)
@@ -611,7 +611,7 @@ L(movsb):
 	movq	%rdi, %r8
 # endif
 	/* If above __x86_rep_movsb_stop_threshold most likely is
-	   candidate for NT moves aswell.  */
+	   candidate for NT moves as well.  */
 	cmp	__x86_rep_movsb_stop_threshold(%rip), %RDX_LP
 	jae	L(large_memcpy_2x_check)
 # if AVOID_SHORT_DISTANCE_REP_MOVSB || ALIGN_MOVSB
diff --git a/sysdeps/x86_64/multiarch/memrchr-avx2.S b/sysdeps/x86_64/multiarch/memrchr-avx2.S
index 15c83f6a2b..409706fd8e 100644
--- a/sysdeps/x86_64/multiarch/memrchr-avx2.S
+++ b/sysdeps/x86_64/multiarch/memrchr-avx2.S
@@ -65,7 +65,7 @@ ENTRY_P2ALIGN(MEMRCHR, 6)
 
 L(ret_vec_x0_test):
 	/* If ecx is zero (no matches) lzcnt will set it 32 (VEC_SIZE) which
-	   will gurantee edx (len) is less than it.  */
+	   will guarantee edx (len) is less than it.  */
 	lzcntl	%ecx, %ecx
 
 	/* Hoist vzeroupper (not great for RTM) to save code size. This allows
@@ -233,7 +233,7 @@ L(more_4x_vec):
 	jnz	L(ret_vec_x3)
 
 	/* Check if near end before re-aligning (otherwise might do an
-	   unnecissary loop iteration).  */
+	   unnecessary loop iteration).  */
 	addq	$-(VEC_SIZE * 4), %rax
 	cmpq	$(VEC_SIZE * 4), %rdx
 	jbe	L(last_4x_vec)
diff --git a/sysdeps/x86_64/multiarch/memrchr-evex.S b/sysdeps/x86_64/multiarch/memrchr-evex.S
index 3d3ef062e2..f7a11783c3 100644
--- a/sysdeps/x86_64/multiarch/memrchr-evex.S
+++ b/sysdeps/x86_64/multiarch/memrchr-evex.S
@@ -119,7 +119,7 @@ L(last_2x_vec):
 # endif
 	jle	L(zero_2)
 
-	/* We adjusted rax (length) for VEC_SIZE == 64 so need seperate
+	/* We adjusted rax (length) for VEC_SIZE == 64 so need separate
 	   offsets.  */
 # if VEC_SIZE == 64
 	vpcmpeqb (VEC_SIZE * -1)(%rdi, %rax), %VMATCH, %k0
@@ -354,7 +354,7 @@ L(loop_4x_vec):
 	jnz	L(first_vec_x1_end)
 	KMOV	%k2, %VRCX
 
-	/* Seperate logic for VEC_SIZE == 64 and VEC_SIZE == 32 for
+	/* Separate logic for VEC_SIZE == 64 and VEC_SIZE == 32 for
 	   returning last 2x VEC. For VEC_SIZE == 64 we test each VEC
 	   individually, for VEC_SIZE == 32 we combine them in a single
 	   64-bit GPR.  */
diff --git a/sysdeps/x86_64/multiarch/memrchr-sse2.S b/sysdeps/x86_64/multiarch/memrchr-sse2.S
index 8fdad16346..0ac707bc14 100644
--- a/sysdeps/x86_64/multiarch/memrchr-sse2.S
+++ b/sysdeps/x86_64/multiarch/memrchr-sse2.S
@@ -50,7 +50,7 @@ ENTRY_P2ALIGN(MEMRCHR, 6)
 	jz	L(page_cross)
 
 	/* NB: This load happens regardless of whether rdx (len) is zero. Since
-	   it doesn't cross a page and the standard gurantees any pointer have
+	   it doesn't cross a page and the standard guarantees any pointer have
 	   at least one-valid byte this load must be safe. For the entire
 	   history of the x86 memrchr implementation this has been possible so
 	   no code "should" be relying on a zero-length check before this load.
diff --git a/sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S b/sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S
index f37be6218a..3d9ad49cb9 100644
--- a/sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S
+++ b/sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S
@@ -199,7 +199,7 @@ L(less_vec_from_wmemset):
 	   MEMSET_VDUP_TO_VEC0_AND_SET_RETURN as ptr from here on out.  */
 	andl	$(PAGE_SIZE - 1), %edi
 	/* Check if VEC_SIZE store cross page. Mask stores suffer
-	   serious performance degradation when it has to fault supress.
+	   serious performance degradation when it has to fault suppress.
 	 */
 	cmpl	$(PAGE_SIZE - VEC_SIZE), %edi
 	/* This is generally considered a cold target.  */
diff --git a/sysdeps/x86_64/multiarch/rawmemchr-evex.S b/sysdeps/x86_64/multiarch/rawmemchr-evex.S
index 52e6b186c8..0175a5e98c 100644
--- a/sysdeps/x86_64/multiarch/rawmemchr-evex.S
+++ b/sysdeps/x86_64/multiarch/rawmemchr-evex.S
@@ -187,13 +187,13 @@ L(loop_4x_vec):
 	   ymm0-15 is used at all is because there is no EVEX encoding
 	   vpcmpeq and with vpcmpeq this loop can be performed more
 	   efficiently.  The non-vzeroupper version is safe for RTM
-	   while the vzeroupper version should be prefered if RTM are
+	   while the vzeroupper version should be preferred if RTM are
 	   not supported.   Which loop version we use is determined by
 	   USE_TERN_IN_LOOP.  */
 
 # if USE_TERN_IN_LOOP
 	/* Since vptern can only take 3x vectors fastest to do 1 vec
-	   seperately with EVEX vpcmp.  */
+	   separately with EVEX vpcmp.  */
 	VPCMPEQ	(VEC_SIZE * 4)(%rdi), %VMATCH, %k1
 	/* Compare 3x with vpcmpeq and or them all together with vptern.
 	 */
@@ -256,7 +256,7 @@ L(loop_4x_vec):
 	   (only if used VEX encoded loop).  */
 	COND_VZEROUPPER
 
-	/* Seperate logic for VEC_SIZE == 64 and VEC_SIZE == 32 for
+	/* Separate logic for VEC_SIZE == 64 and VEC_SIZE == 32 for
 	   returning last 2x VEC. For VEC_SIZE == 64 we test each VEC
 	   individually, for VEC_SIZE == 32 we combine them in a single
 	   64-bit GPR.  */
diff --git a/sysdeps/x86_64/multiarch/strcat-sse2.S b/sysdeps/x86_64/multiarch/strcat-sse2.S
index e35790c5f9..459bd8e8aa 100644
--- a/sysdeps/x86_64/multiarch/strcat-sse2.S
+++ b/sysdeps/x86_64/multiarch/strcat-sse2.S
@@ -163,7 +163,7 @@ ENTRY (STRCAT)
 	decl	%ecx
 	jnz	21b
 
-	/* Now the sources is aligned.  Unfortunatly we cannot force
+	/* Now the sources is aligned.  Unfortunately we cannot force
 	   to have both source and destination aligned, so ignore the
 	   alignment of the destination.  */
 	.p2align 4
diff --git a/sysdeps/x86_64/multiarch/strcat-strlen-avx2.h.S b/sysdeps/x86_64/multiarch/strcat-strlen-avx2.h.S
index 4633aa9921..0564f11ea1 100644
--- a/sysdeps/x86_64/multiarch/strcat-strlen-avx2.h.S
+++ b/sysdeps/x86_64/multiarch/strcat-strlen-avx2.h.S
@@ -1,4 +1,4 @@
-/* strlen used for begining of str{n}cat using AVX2.
+/* strlen used for beginning of str{n}cat using AVX2.
    Copyright (C) 2011-2023 Free Software Foundation, Inc.
    This file is part of the GNU C Library.
 
diff --git a/sysdeps/x86_64/multiarch/strcat-strlen-evex.h.S b/sysdeps/x86_64/multiarch/strcat-strlen-evex.h.S
index 9ce667dced..37b773dce6 100644
--- a/sysdeps/x86_64/multiarch/strcat-strlen-evex.h.S
+++ b/sysdeps/x86_64/multiarch/strcat-strlen-evex.h.S
@@ -1,4 +1,4 @@
-/* strlen used for begining of str{n}cat using EVEX 256/512.
+/* strlen used for beginning of str{n}cat using EVEX 256/512.
    Copyright (C) 2011-2023 Free Software Foundation, Inc.
    This file is part of the GNU C Library.
 
diff --git a/sysdeps/x86_64/multiarch/strchr-evex.S b/sysdeps/x86_64/multiarch/strchr-evex.S
index 3efa1b3194..f5236cf9a3 100644
--- a/sysdeps/x86_64/multiarch/strchr-evex.S
+++ b/sysdeps/x86_64/multiarch/strchr-evex.S
@@ -160,7 +160,7 @@ L(last_vec_x2):
 # endif
 L(first_vec_x1):
 	/* Use bsf here to save 1-byte keeping keeping the block in 1x
-	   fetch block. eax guranteed non-zero.  */
+	   fetch block. eax guaranteed non-zero.  */
 	bsf	%VRCX, %VRCX
 # ifndef USE_AS_STRCHRNUL
 	/* Found CHAR or the null byte.  */
@@ -294,7 +294,7 @@ L(loop_4x_vec):
 
 	/* Two methods for loop depending on VEC_SIZE.  This is because
 	   with zmm registers VPMINU can only run on p0 (as opposed to
-	   p0/p1 for ymm) so it is less prefered.  */
+	   p0/p1 for ymm) so it is less preferred.  */
 # if VEC_SIZE == 32
 	/* For VEC_2 and VEC_3 use xor to set the CHARs matching esi to
 	   zero.  */
@@ -340,7 +340,7 @@ L(loop_4x_vec):
 	   esi, the corresponding bit in %k3 is zero so the
 	   VPMINU_MASKZ will have a zero in the result).  NB: This make
 	   the VPMINU 3c latency.  The only way to avoid it is to
-	   createa a 12c dependency chain on all the `VPCMP $4, ...`
+	   create a 12c dependency chain on all the `VPCMP $4, ...`
 	   which has higher total latency.  */
 	VPMINU	%VMM(2), %VMM(4), %VMM(4){%k3}{z}
 # endif
@@ -366,7 +366,7 @@ L(loop_4x_vec):
 # endif
 
 
-	/* COND_MASK integates the esi matches for VEC_SIZE == 64. For
+	/* COND_MASK integrates the esi matches for VEC_SIZE == 64. For
 	   VEC_SIZE == 32 they are already integrated.  */
 	VPTEST	%VMM(2), %VMM(2), %k0 COND_MASK(k2)
 	KMOV	%k0, %VRCX
@@ -403,7 +403,7 @@ L(zero_end):
 # endif
 
 
-	/* Seperate return label for last VEC1 because for VEC_SIZE ==
+	/* Separate return label for last VEC1 because for VEC_SIZE ==
 	   32 we can reuse return code in L(page_cross) but VEC_SIZE ==
 	   64 has mismatched registers.  */
 # if VEC_SIZE == 64
@@ -480,7 +480,7 @@ L(cross_page_boundary_real):
 	 */
 	xorl	$((1 << CHAR_PER_VEC)- 1), %eax
 # endif
-	/* Use arithmatic shift so that leading 1s are filled in.  */
+	/* Use arithmetic shift so that leading 1s are filled in.  */
 	sarx	%VGPR(SHIFT_REG), %VRAX, %VRAX
 	/* If eax is all ones then no matches for esi or NULL.  */
 
diff --git a/sysdeps/x86_64/multiarch/strchr-sse2.S b/sysdeps/x86_64/multiarch/strchr-sse2.S
index 6036016fc7..192cd136b6 100644
--- a/sysdeps/x86_64/multiarch/strchr-sse2.S
+++ b/sysdeps/x86_64/multiarch/strchr-sse2.S
@@ -86,7 +86,7 @@ L(next_48_bytes):
 	jne	L(return)
 L(loop_start):
 	/* We use this alignment to force loop be aligned to 8 but not
-	   16 bytes.  This gives better sheduling on AMD processors.  */
+	   16 bytes.  This gives better scheduling on AMD processors.  */
 	.p2align 4
 	pxor	%xmm6, %xmm6
 	andq	$-64, %rdi
diff --git a/sysdeps/x86_64/multiarch/strcmp-avx2.S b/sysdeps/x86_64/multiarch/strcmp-avx2.S
index 07f8ec54c6..8804338d75 100644
--- a/sysdeps/x86_64/multiarch/strcmp-avx2.S
+++ b/sysdeps/x86_64/multiarch/strcmp-avx2.S
@@ -194,7 +194,7 @@ ENTRY (STRCASECMP)
 	movq	__libc_tsd_LOCALE@gottpoff(%rip), %rax
 	mov	%fs:(%rax), %LOCALE_REG_LP
 
-	/* Either 1 or 5 bytes (dependeing if CET is enabled).  */
+	/* Either 1 or 5 bytes (depending if CET is enabled).  */
 	.p2align 4
 END (STRCASECMP)
 	/* FALLTHROUGH to strcasecmp/strncasecmp_l.  */
@@ -501,7 +501,7 @@ L(more_3x_vec):
 L(prepare_loop):
 
 # ifdef USE_AS_STRNCMP
-	/* Store N + (VEC_SIZE * 4) and place check at the begining of
+	/* Store N + (VEC_SIZE * 4) and place check at the beginning of
 	   the loop.  */
 	leaq	(VEC_SIZE * 2)(%rdi, %rdx), %rdx
 # endif
@@ -762,7 +762,7 @@ L(page_cross_during_loop):
 	.p2align 4,, 4
 L(less_1x_vec_till_page_cross):
 	subl	$-(VEC_SIZE * 4), %eax
-	/* Guranteed safe to read from rdi - VEC_SIZE here. The only
+	/* Guaranteed safe to read from rdi - VEC_SIZE here. The only
 	   concerning case is first iteration if incoming s1 was near start
 	   of a page and s2 near end. If s1 was near the start of the page
 	   we already aligned up to nearest VEC_SIZE * 4 so gurnateed safe
@@ -948,7 +948,7 @@ L(ret9):
 L(page_cross):
 # ifndef USE_AS_STRNCMP
 	/* If both are VEC aligned we don't need any special logic here.
-	   Only valid for strcmp where stop condition is guranteed to be
+	   Only valid for strcmp where stop condition is guaranteed to be
 	   reachable by just reading memory.  */
 	testl	$((VEC_SIZE - 1) << 20), %eax
 	jz	L(no_page_cross)
@@ -984,7 +984,7 @@ L(page_cross):
 	subl	$(VEC_SIZE * 3), %eax
 	jg	L(less_1x_vec_till_page)
 
-	/* If more than 1x VEC till page cross, loop throuh safely
+	/* If more than 1x VEC till page cross, loop through safely
 	   loadable memory until within 1x VEC of page cross.  */
 
 	.p2align 4,, 10
@@ -1007,9 +1007,9 @@ L(page_cross_loop):
 	jl	L(page_cross_loop)
 
 	subl	%eax, %OFFSET_REG
-	/* OFFSET_REG has distance to page cross - VEC_SIZE. Guranteed
+	/* OFFSET_REG has distance to page cross - VEC_SIZE. Guaranteed
 	   to not cross page so is safe to load. Since we have already
-	   loaded at least 1 VEC from rsi it is also guranteed to be
+	   loaded at least 1 VEC from rsi it is also guaranteed to be
 	   safe.  */
 
 	VMOVU	(%rdi, %OFFSET_REG64), %ymm0
diff --git a/sysdeps/x86_64/multiarch/strcmp-evex.S b/sysdeps/x86_64/multiarch/strcmp-evex.S
index a8bd5cd786..ae39cdf217 100644
--- a/sysdeps/x86_64/multiarch/strcmp-evex.S
+++ b/sysdeps/x86_64/multiarch/strcmp-evex.S
@@ -217,7 +217,7 @@ ENTRY (STRCASECMP)
 	movq	__libc_tsd_LOCALE@gottpoff(%rip), %rax
 	mov	%fs:(%rax), %LOCALE_REG_LP
 
-	/* Either 1 or 5 bytes (dependeing if CET is enabled).  */
+	/* Either 1 or 5 bytes (depending if CET is enabled).  */
 	.p2align 4
 END (STRCASECMP)
 	/* FALLTHROUGH to strcasecmp/strncasecmp_l.  */
@@ -455,7 +455,7 @@ L(return_vec_3):
 # endif
 
 	/* If CHAR_PER_VEC == 64 we can't combine matches from the last
-	   2x VEC so need seperate return label.  */
+	   2x VEC so need separate return label.  */
 L(return_vec_2):
 # if (CHAR_PER_VEC <= 16) || !(defined USE_AS_STRNCMP)
 	bsf	%VRCX, %VRCX
@@ -567,7 +567,7 @@ L(prepare_loop_no_len):
 	shrl	$2, %ecx
 	leaq	(CHAR_PER_VEC * 2)(%rdx, %rcx), %rdx
 #  else
-	/* Store N + (VEC_SIZE * 4) and place check at the begining of
+	/* Store N + (VEC_SIZE * 4) and place check at the beginning of
 	   the loop.  */
 	leaq	(VEC_SIZE * 2)(%rdi, %rdx), %rdx
 L(prepare_loop_no_len):
@@ -840,7 +840,7 @@ L(ret7):
 
 
 	/* If CHAR_PER_VEC == 64 we can't combine matches from the last
-	   2x VEC so need seperate return label.  */
+	   2x VEC so need separate return label.  */
 # if CHAR_PER_VEC == 64
 L(return_vec_2_end):
 	bsf	%VRCX, %VRCX
@@ -906,7 +906,7 @@ L(page_cross_during_loop):
 	.p2align 4,, 4
 L(less_1x_vec_till_page_cross):
 	subl	$-(VEC_SIZE * 4), %eax
-	/* Guranteed safe to read from rdi - VEC_SIZE here. The only
+	/* Guaranteed safe to read from rdi - VEC_SIZE here. The only
 	   concerning case is first iteration if incoming s1 was near start
 	   of a page and s2 near end. If s1 was near the start of the page
 	   we already aligned up to nearest VEC_SIZE * 4 so gurnateed safe
@@ -997,7 +997,7 @@ L(return_page_cross_end_check):
 	and	%VR10, %VRCX
 	/* Need to use tzcnt here as VRCX may be zero.  If VRCX is zero
 	   tzcnt(VRCX) will be CHAR_PER and remaining length (edx) is
-	   guranteed to be <= CHAR_PER_VEC so we will only use the return
+	   guaranteed to be <= CHAR_PER_VEC so we will only use the return
 	   idx if VRCX was non-zero.  */
 	tzcnt	%VRCX, %VRCX
 	leal	-VEC_SIZE(%rax, %rcx, SIZE_OF_CHAR), %ecx
@@ -1147,7 +1147,7 @@ L(ret9):
 L(page_cross):
 # ifndef USE_AS_STRNCMP
 	/* If both are VEC aligned we don't need any special logic here.
-	   Only valid for strcmp where stop condition is guranteed to
+	   Only valid for strcmp where stop condition is guaranteed to
 	   be reachable by just reading memory.  */
 	testl	$((VEC_SIZE - 1) << 20), %eax
 	jz	L(no_page_cross)
@@ -1185,7 +1185,7 @@ L(page_cross):
 	jg	L(less_1x_vec_till_page)
 
 
-	/* If more than 1x VEC till page cross, loop throuh safely
+	/* If more than 1x VEC till page cross, loop through safely
 	   loadable memory until within 1x VEC of page cross.  */
 	.p2align 4,, 8
 L(page_cross_loop):
@@ -1209,9 +1209,9 @@ L(page_cross_loop):
 
 
 	subl	%eax, %OFFSET_REG
-	/* OFFSET_REG has distance to page cross - VEC_SIZE. Guranteed
+	/* OFFSET_REG has distance to page cross - VEC_SIZE. Guaranteed
 	   to not cross page so is safe to load. Since we have already
-	   loaded at least 1 VEC from rsi it is also guranteed to be
+	   loaded at least 1 VEC from rsi it is also guaranteed to be
 	   safe.  */
 	VMOVU	(%rdi, %OFFSET_REG64, SIZE_OF_CHAR), %VMM(0)
 	VPTESTM	%VMM(0), %VMM(0), %k2
diff --git a/sysdeps/x86_64/multiarch/strcmp-sse2-unaligned.S b/sysdeps/x86_64/multiarch/strcmp-sse2-unaligned.S
index 2cf3c6f16d..516fe7a543 100644
--- a/sysdeps/x86_64/multiarch/strcmp-sse2-unaligned.S
+++ b/sysdeps/x86_64/multiarch/strcmp-sse2-unaligned.S
@@ -20,7 +20,7 @@
 
 /* Continue building as ISA level 2.  We use this as ISA V2 default
    because strcmp-sse42 uses pcmpstri (slow on some SSE4.2
-   processors) and this implementation is potenially faster than
+   processors) and this implementation is potentially faster than
    strcmp-sse42 (aside from the slower page cross case).  */
 #if ISA_SHOULD_BUILD (2)
 
diff --git a/sysdeps/x86_64/multiarch/strcmp-sse2.S b/sysdeps/x86_64/multiarch/strcmp-sse2.S
index 4a96f2dfb0..562c0210d3 100644
--- a/sysdeps/x86_64/multiarch/strcmp-sse2.S
+++ b/sysdeps/x86_64/multiarch/strcmp-sse2.S
@@ -75,7 +75,7 @@ ENTRY2 (STRCASECMP)
 	movq	__libc_tsd_LOCALE@gottpoff(%rip),%rax
 	mov	%fs:(%rax),%RDX_LP
 
-	/* Either 1 or 5 bytes (dependeing if CET is enabled).  */
+	/* Either 1 or 5 bytes (depending if CET is enabled).  */
 	.p2align 4
 END2 (STRCASECMP)
 	/* FALLTHROUGH to strcasecmp_l.  */
@@ -89,7 +89,7 @@ ENTRY2 (STRCASECMP)
 	movq	__libc_tsd_LOCALE@gottpoff(%rip),%rax
 	mov	%fs:(%rax),%RCX_LP
 
-	/* Either 1 or 5 bytes (dependeing if CET is enabled).  */
+	/* Either 1 or 5 bytes (depending if CET is enabled).  */
 	.p2align 4
 END2 (STRCASECMP)
 	/* FALLTHROUGH to strncasecmp_l.  */
@@ -186,7 +186,7 @@ ENTRY (STRCMP)
 	jnz	LABEL(less16bytes)	/* If not, find different value or null char */
 # if defined USE_AS_STRNCMP || defined USE_AS_STRNCASECMP_L
 	sub	$16, %r11
-	jbe	LABEL(strcmp_exitz)	/* finish comparision */
+	jbe	LABEL(strcmp_exitz)	/* finish comparison */
 # endif
 	add	$16, %rsi		/* prepare to search next 16 bytes */
 	add	$16, %rdi		/* prepare to search next 16 bytes */
@@ -400,7 +400,7 @@ LABEL(nibble_ashr_1):
 # endif
 
 	pxor	%xmm0, %xmm0
-	sub	$0x1000, %r10		/* substract 4K from %r10 */
+	sub	$0x1000, %r10		/* subtract 4K from %r10 */
 	jmp	LABEL(gobble_ashr_1)
 
 	/*
diff --git a/sysdeps/x86_64/multiarch/strcmp-sse4_2.S b/sysdeps/x86_64/multiarch/strcmp-sse4_2.S
index f93c34465e..cbb22884eb 100644
--- a/sysdeps/x86_64/multiarch/strcmp-sse4_2.S
+++ b/sysdeps/x86_64/multiarch/strcmp-sse4_2.S
@@ -84,7 +84,7 @@ ENTRY (STRCASECMP)
 	movq	__libc_tsd_LOCALE@gottpoff(%rip),%rax
 	mov	%fs:(%rax),%RDX_LP
 
-	/* Either 1 or 5 bytes (dependeing if CET is enabled).  */
+	/* Either 1 or 5 bytes (depending if CET is enabled).  */
 	.p2align 4
 END (STRCASECMP)
 	/* FALLTHROUGH to strcasecmp_l.  */
@@ -94,7 +94,7 @@ ENTRY (STRCASECMP)
 	movq	__libc_tsd_LOCALE@gottpoff(%rip),%rax
 	mov	%fs:(%rax),%RCX_LP
 
-	/* Either 1 or 5 bytes (dependeing if CET is enabled).  */
+	/* Either 1 or 5 bytes (depending if CET is enabled).  */
 	.p2align 4
 END (STRCASECMP)
 	/* FALLTHROUGH to strncasecmp_l.  */
diff --git a/sysdeps/x86_64/multiarch/strcpy-sse2.S b/sysdeps/x86_64/multiarch/strcpy-sse2.S
index a2f70474d6..443c62b535 100644
--- a/sysdeps/x86_64/multiarch/strcpy-sse2.S
+++ b/sysdeps/x86_64/multiarch/strcpy-sse2.S
@@ -50,7 +50,7 @@ ENTRY (STRCPY)
 5:
 	movq $0xfefefefefefefeff,%r8
 
-	/* Now the sources is aligned.  Unfortunatly we cannot force
+	/* Now the sources is aligned.  Unfortunately we cannot force
 	   to have both source and destination aligned, so ignore the
 	   alignment of the destination.  */
 	.p2align 4
diff --git a/sysdeps/x86_64/multiarch/strlen-avx2.S b/sysdeps/x86_64/multiarch/strlen-avx2.S
index a2cd2d8337..ef47a45cb6 100644
--- a/sysdeps/x86_64/multiarch/strlen-avx2.S
+++ b/sysdeps/x86_64/multiarch/strlen-avx2.S
@@ -224,7 +224,7 @@ L(cross_page_continue):
 	   since data is only aligned to VEC_SIZE.  */
 # ifdef USE_AS_STRNLEN
 	/* + 1 because rdi is aligned to VEC_SIZE - 1. + CHAR_SIZE
-	   because it simplies the logic in last_4x_vec_or_less.  */
+	   because it simplifies the logic in last_4x_vec_or_less.  */
 	leaq	(VEC_SIZE * 4 + CHAR_SIZE + 1)(%rdi), %rcx
 	subq	%rdx, %rcx
 #  ifdef USE_AS_WCSLEN
diff --git a/sysdeps/x86_64/multiarch/strncat-evex.S b/sysdeps/x86_64/multiarch/strncat-evex.S
index fedad6ccdb..7d170891b3 100644
--- a/sysdeps/x86_64/multiarch/strncat-evex.S
+++ b/sysdeps/x86_64/multiarch/strncat-evex.S
@@ -236,7 +236,7 @@ L(more_1x_vec):
 	VMOVU	%VMM(0), (%rdi)
 
 	/* We are going to align rsi here so will need to be able to re-
-	   adjust rdi/rdx afterwords. NB: We filtered out huge lengths
+	   adjust rdi/rdx afterwards. NB: We filtered out huge lengths
 	   so rsi + rdx * CHAR_SIZE cannot overflow.  */
 
 	leaq	(VEC_SIZE * -1)(%rsi, %rdx, CHAR_SIZE), %rdx
diff --git a/sysdeps/x86_64/multiarch/strncpy-avx2.S b/sysdeps/x86_64/multiarch/strncpy-avx2.S
index 815b33db24..3a54be1604 100644
--- a/sysdeps/x86_64/multiarch/strncpy-avx2.S
+++ b/sysdeps/x86_64/multiarch/strncpy-avx2.S
@@ -99,7 +99,7 @@ L(page_cross_continue):
 	/* `jb` because length rdx is now length - CHAR_SIZE.  */
 	jbe	L(less_1x_vec)
 
-	/* This may overset but thats fine because we still need to zero
+	/* This may overset but that's fine because we still need to zero
 	   fill.  */
 	VMOVU	%VMM(0), (%rdi)
 
diff --git a/sysdeps/x86_64/multiarch/strncpy-evex.S b/sysdeps/x86_64/multiarch/strncpy-evex.S
index 44715f2f7c..2a3b6d1dce 100644
--- a/sysdeps/x86_64/multiarch/strncpy-evex.S
+++ b/sysdeps/x86_64/multiarch/strncpy-evex.S
@@ -130,7 +130,7 @@ L(page_cross_continue):
 	jae	L(more_1x_vec)
 
 	/* If there where multiple zero-CHAR matches in the first VEC,
-	   VRCX will be overset but thats fine since any oversets where
+	   VRCX will be overset but that's fine since any oversets where
 	   at zero-positions anyways.  */
 
 #  ifdef USE_AS_STPCPY
@@ -177,7 +177,7 @@ L(more_1x_vec):
 # endif
 
 
-	/* This may overset but thats fine because we still need to zero
+	/* This may overset but that's fine because we still need to zero
 	   fill.  */
 	VMOVU	%VMM(0), (%rdi)
 
@@ -189,7 +189,7 @@ L(more_1x_vec):
 
 
 	/* We are going to align rsi here so will need to be able to re-
-	   adjust rdi/rdx afterwords. NB: We filtered out huge lengths
+	   adjust rdi/rdx afterwards. NB: We filtered out huge lengths
 	   so rsi + rdx * CHAR_SIZE cannot overflow.  */
 	leaq	(VEC_SIZE * -1)(%rsi, %rdx, CHAR_SIZE), %rdx
 	subq	%rsi, %rdi
@@ -221,7 +221,7 @@ L(last_2x_vec):
 	cmpl	$(CHAR_PER_VEC), %edx
 	jb	L(ret_vec_x1_len)
 
-	/* Seperate logic for CHAR_PER_VEC == 64 because we already did
+	/* Separate logic for CHAR_PER_VEC == 64 because we already did
 	   `tzcnt` on VRCX.  */
 # if CHAR_PER_VEC == 64
 	/* cl == CHAR_PER_VEC iff it was zero before the `tzcnt`.  */
@@ -296,7 +296,7 @@ L(ret_vec_x1_no_bsf):
 
 	.p2align 4,, 8
 L(last_4x_vec):
-	/* Seperate logic for CHAR_PER_VEC == 64 because we can do `andl
+	/* Separate logic for CHAR_PER_VEC == 64 because we can do `andl
 	   $(CHAR_PER_VEC * 4 - 1), %edx` with less code size just
 	   using `movzbl`.  */
 # if CHAR_PER_VEC == 64
@@ -677,7 +677,7 @@ L(copy_16_31):
 	vmovdqu	%xmm1, -(16 - CHAR_SIZE)(%rdi, %rdx, CHAR_SIZE)
 	cmpl	%ecx, %edx
 
-	/* Seperate logic depending on VEC_SIZE. If VEC_SIZE == 64 then
+	/* Separate logic depending on VEC_SIZE. If VEC_SIZE == 64 then
 	   we have a larger copy block for 32-63 so this is just falls
 	   through to zfill 16-31. If VEC_SIZE == 32 then we check for
 	   full zfill of less 1x VEC.  */
diff --git a/sysdeps/x86_64/multiarch/strnlen-evex.S b/sysdeps/x86_64/multiarch/strnlen-evex.S
index 28caa86d06..ae082d3241 100644
--- a/sysdeps/x86_64/multiarch/strnlen-evex.S
+++ b/sysdeps/x86_64/multiarch/strnlen-evex.S
@@ -336,7 +336,7 @@ L(loop_last_4x_vec):
 
 	VPTESTN	%VMM(3), %VMM(3), %k0
 
-	/* Seperate logic for VEC_SIZE == 64 and VEC_SIZE == 32 for
+	/* Separate logic for VEC_SIZE == 64 and VEC_SIZE == 32 for
 	   returning last 2x VEC. For VEC_SIZE == 64 we test each VEC
 	   individually, for VEC_SIZE == 32 we combine them in a single
 	   64-bit GPR.  */
diff --git a/sysdeps/x86_64/multiarch/strrchr-avx2.S b/sysdeps/x86_64/multiarch/strrchr-avx2.S
index 9db2d9c741..ebbd84b2d1 100644
--- a/sysdeps/x86_64/multiarch/strrchr-avx2.S
+++ b/sysdeps/x86_64/multiarch/strrchr-avx2.S
@@ -176,7 +176,7 @@ L(aligned_more):
 	.p2align 4
 L(first_aligned_loop):
 	/* Do 2x VEC at a time. Any more and the cost of finding the
-	   match outweights loop benefit.  */
+	   match outweighs loop benefit.  */
 	vmovdqa	(VEC_SIZE * 0)(%rdi), %ymm4
 	vmovdqa	(VEC_SIZE * 1)(%rdi), %ymm5
 
@@ -324,7 +324,7 @@ L(cross_page):
 	vmovdqu	(%rsi), %ymm1
 	VPCMPEQ	%ymm1, %ymm0, %ymm6
 	vpmovmskb %ymm6, %ecx
-	/* Shift out zero CHAR matches that are before the begining of
+	/* Shift out zero CHAR matches that are before the beginning of
 	   src (rdi).  */
 	shrxl	%edi, %ecx, %ecx
 	testl	%ecx, %ecx
@@ -332,7 +332,7 @@ L(cross_page):
 	VPCMPEQ	%ymm1, %ymm7, %ymm1
 	vpmovmskb %ymm1, %eax
 
-	/* Shift out search CHAR matches that are before the begining of
+	/* Shift out search CHAR matches that are before the beginning of
 	   src (rdi).  */
 	shrxl	%edi, %eax, %eax
 	blsmskl	%ecx, %ecx
diff --git a/sysdeps/x86_64/multiarch/strrchr-evex-base.S b/sysdeps/x86_64/multiarch/strrchr-evex-base.S
index 77830741c2..58b2853ab6 100644
--- a/sysdeps/x86_64/multiarch/strrchr-evex-base.S
+++ b/sysdeps/x86_64/multiarch/strrchr-evex-base.S
@@ -152,7 +152,7 @@ L(loop):
 	jnz	L(loop_vec_x2_match)
 
 	KMOV	%k1, %VRDX
-	/* Match is in first vector, rdi offset need to be substracted
+	/* Match is in first vector, rdi offset need to be subtracted
 	  by VEC_SIZE.  */
 	sub	$VEC_SIZE, %r8
 
@@ -216,7 +216,7 @@ L(check_last_match):
 	ret
 
 	/* No match recorded in r8. Check the second saved vector
-	   in begining.  */
+	   in beginning.  */
 L(vector_x2_ret):
 	VPCMPEQ %VMM(2), %VMM(0), %k2
 	KMOV	%k2, %VRAX
diff --git a/sysdeps/x86_64/multiarch/strrchr-evex.S b/sysdeps/x86_64/multiarch/strrchr-evex.S
index 0d1bf07685..85e3b0119f 100644
--- a/sysdeps/x86_64/multiarch/strrchr-evex.S
+++ b/sysdeps/x86_64/multiarch/strrchr-evex.S
@@ -139,7 +139,7 @@ L(first_vec_x1_or_x2):
 	KORTEST %k2, %k3
 	jz	L(first_vec_x0_test)
 
-	/* Guranteed that VEC(2) and VEC(3) are within range so merge
+	/* Guaranteed that VEC(2) and VEC(3) are within range so merge
 	   the two bitmasks then get last result.  */
 	kunpck_2x %k2, %k3, %k3
 	kmov_2x	%k3, %maskm_2x
@@ -192,7 +192,7 @@ L(first_vec_x2):
 
 	.p2align 4,, 12
 L(aligned_more):
-	/* Need to keep original pointer incase VEC(1) has last match.
+	/* Need to keep original pointer in case VEC(1) has last match.
 	 */
 	movq	%rdi, %rsi
 	andq	$-VEC_SIZE, %rdi
@@ -222,7 +222,7 @@ L(aligned_more):
 	.p2align 4,, 10
 L(first_aligned_loop):
 	/* Preserve VEC(1), VEC(2), VEC(3), and VEC(4) until we can
-	   gurantee they don't store a match.  */
+	   guarantee they don't store a match.  */
 	VMOVA	(VEC_SIZE * 4)(%rdi), %VMM(5)
 	VMOVA	(VEC_SIZE * 5)(%rdi), %VMM(6)
 
@@ -285,7 +285,7 @@ L(second_aligned_loop_prep):
 L(second_aligned_loop_set_furthest_match):
 	movq	%rdi, %rsi
 	/* Ideally we would safe k2/k3 but `kmov/kunpck` take uops on
-	   port0 and have noticable overhead in the loop.  */
+	   port0 and have noticeable overhead in the loop.  */
 	VMOVA	%VMM(5), %VMM(7)
 	VMOVA	%VMM(6), %VMM(8)
 	.p2align 4
@@ -351,7 +351,7 @@ L(cross_page_boundary):
 	/* eax contains all the page offset bits of src (rdi). `xor rdi,
 	   rax` sets pointer will all page offset bits cleared so
 	   offset of (PAGE_SIZE - VEC_SIZE) will get last aligned VEC
-	   before page cross (guranteed to be safe to read). Doing this
+	   before page cross (guaranteed to be safe to read). Doing this
 	   as opposed to `movq %rdi, %rax; andq $-VEC_SIZE, %rax` saves
 	   a bit of code size.  */
 	xorq	%rdi, %rax
@@ -359,7 +359,7 @@ L(cross_page_boundary):
 	VPTESTN	%VMM(1), %VMM(1), %k0
 	KMOV	%k0, %VRCX
 
-	/* Shift out zero CHAR matches that are before the begining of
+	/* Shift out zero CHAR matches that are before the beginning of
 	   src (rdi).  */
 # ifdef USE_AS_WCSRCHR
 	movl	%edi, %esi
@@ -374,7 +374,7 @@ L(cross_page_boundary):
 	/* Found zero CHAR so need to test for search CHAR.  */
 	VPCMP	$0, %VMATCH, %VMM(1), %k1
 	KMOV	%k1, %VRAX
-	/* Shift out search CHAR matches that are before the begining of
+	/* Shift out search CHAR matches that are before the beginning of
 	   src (rdi).  */
 	shrx	%VGPR(SHIFT_REG), %VRAX, %VRAX
 
diff --git a/sysdeps/x86_64/multiarch/strrchr-sse2.S b/sysdeps/x86_64/multiarch/strrchr-sse2.S
index 9bc4fc3dfe..c9749eea09 100644
--- a/sysdeps/x86_64/multiarch/strrchr-sse2.S
+++ b/sysdeps/x86_64/multiarch/strrchr-sse2.S
@@ -166,7 +166,7 @@ L(first_loop):
 	/* Do 2x VEC at a time.  */
 	movaps	(VEC_SIZE * 2)(%rdi), %xmm4
 	movaps	(VEC_SIZE * 3)(%rdi), %xmm5
-	/* Since SSE2 no pminud so wcsrchr needs seperate logic for
+	/* Since SSE2 no pminud so wcsrchr needs separate logic for
 	   detecting zero. Note if this is found to be a bottleneck it
 	   may be worth adding an SSE4.1 wcsrchr implementation.  */
 # ifdef USE_AS_WCSRCHR
@@ -238,7 +238,7 @@ L(new_match):
 
 	/* We can't reuse either of the old comparisons as since we mask
 	   of zeros after first zero (instead of using the full
-	   comparison) we can't gurantee no interference between match
+	   comparison) we can't guarantee no interference between match
 	   after end of string and valid match.  */
 	pmovmskb %xmm4, %eax
 	pmovmskb %xmm7, %edx
@@ -268,7 +268,7 @@ L(second_loop_match):
 L(second_loop):
 	movaps	(VEC_SIZE * 2)(%rdi), %xmm4
 	movaps	(VEC_SIZE * 3)(%rdi), %xmm5
-	/* Since SSE2 no pminud so wcsrchr needs seperate logic for
+	/* Since SSE2 no pminud so wcsrchr needs separate logic for
 	   detecting zero. Note if this is found to be a bottleneck it
 	   may be worth adding an SSE4.1 wcsrchr implementation.  */
 # ifdef USE_AS_WCSRCHR
@@ -297,11 +297,11 @@ L(second_loop):
 	pmovmskb %xmm6, %eax
 
 	addq	$(VEC_SIZE * 2), %rdi
-	/* Either null term or new occurence of CHAR.  */
+	/* Either null term or new occurrence of CHAR.  */
 	addl	%ecx, %eax
 	jz	L(second_loop)
 
-	/* No null term so much be new occurence of CHAR.  */
+	/* No null term so much be new occurrence of CHAR.  */
 	testl	%ecx, %ecx
 	jz	L(second_loop_match)
 
@@ -331,7 +331,7 @@ L(second_loop_new_match):
 
 	/* We can't reuse either of the old comparisons as since we mask
 	   of zeros after first zero (instead of using the full
-	   comparison) we can't gurantee no interference between match
+	   comparison) we can't guarantee no interference between match
 	   after end of string and valid match.  */
 	pmovmskb %xmm4, %eax
 	pmovmskb %xmm7, %edx
diff --git a/sysdeps/x86_64/multiarch/strstr-avx512.c b/sysdeps/x86_64/multiarch/strstr-avx512.c
index ba7d8f5e68..0b853930af 100644
--- a/sysdeps/x86_64/multiarch/strstr-avx512.c
+++ b/sysdeps/x86_64/multiarch/strstr-avx512.c
@@ -140,7 +140,7 @@ __strstr_avx512 (const char *haystack, const char *ned)
       = cvtmask64_u64 (_mm512_mask_testn_epi8_mask (loadmask, hay0, hay0));
   uint64_t cmpmask = nullmask ^ (nullmask - ONE_64BIT);
   cmpmask = cmpmask & cvtmask64_u64 (loadmask);
-  /* Search for the 2 charaters of needle */
+  /* Search for the 2 characters of needle */
   __mmask64 k0 = _mm512_cmpeq_epi8_mask (hay0, ned0);
   __mmask64 k1 = _mm512_cmpeq_epi8_mask (hay0, ned1);
   k1 = kshiftri_mask64 (k1, 1);