Update.

1998-12-01 09:47 -0500  Zack Weinberg  <zack@rabi.phys.columbia.edu>

	* sysdeps/unix/sysv/linux/sys/timex.h: Copy out
	user-space-relevant definitions from linux/timex.h of kernel
	2.1.130 and remove include of kernel header.

	* sysdeps/unix/sysv/linux/adjtime.c: Remove portability crud.

1 files changed, 82 insertions, 1 deletions

diff --git a/sysdeps/unix/sysv/linux/sys/timex.h b/sysdeps/unix/sysv/linux/sys/timex.h
index 3108ba43da..aa3ee39d22 100644
--- a/sysdeps/unix/sysv/linux/sys/timex.h
+++ b/sysdeps/unix/sysv/linux/sys/timex.h
@@ -21,7 +21,88 @@
 
 #include <features.h>
 #include <sys/time.h>
-#include <linux/timex.h>
+
+/* These definitions from linux/timex.h as of 2.1.130.  */
+
+struct timex
+{
+  unsigned int modes;	/* mode selector */
+  long offset;		/* time offset (usec) */
+  long freq;		/* frequency offset (scaled ppm) */
+  long maxerror;	/* maximum error (usec) */
+  long esterror;	/* estimated error (usec) */
+  int status;		/* clock command/status */
+  long constant;	/* pll time constant */
+  long precision;	/* clock precision (usec) (read only) */
+  long tolerance;	/* clock frequency tolerance (ppm) (read only) */
+  struct timeval time;	/* (read only) */
+  long tick;		/* (modified) usecs between clock ticks */
+
+  long ppsfreq;         /* pps frequency (scaled ppm) (ro) */
+  long jitter;          /* pps jitter (us) (ro) */
+  int shift;            /* interval duration (s) (shift) (ro) */
+  long stabil;          /* pps stability (scaled ppm) (ro) */
+  long jitcnt;          /* jitter limit exceeded (ro) */
+  long calcnt;          /* calibration intervals (ro) */
+  long errcnt;          /* calibration errors (ro) */
+  long stbcnt;          /* stability limit exceeded (ro) */
+
+  /* ??? */
+  int  :32; int  :32; int  :32; int  :32;
+  int  :32; int  :32; int  :32; int  :32;
+  int  :32; int  :32; int  :32; int  :32;
+};
+
+/* Mode codes (timex.mode) */
+#define ADJ_OFFSET		0x0001	/* time offset */
+#define ADJ_FREQUENCY		0x0002	/* frequency offset */
+#define ADJ_MAXERROR		0x0004	/* maximum time error */
+#define ADJ_ESTERROR		0x0008	/* estimated time error */
+#define ADJ_STATUS		0x0010	/* clock status */
+#define ADJ_TIMECONST		0x0020	/* pll time constant */
+#define ADJ_TICK		0x4000	/* tick value */
+#define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
+
+/* xntp 3.4 compatibility names */
+#define MOD_OFFSET	ADJ_OFFSET
+#define MOD_FREQUENCY	ADJ_FREQUENCY
+#define MOD_MAXERROR	ADJ_MAXERROR
+#define MOD_ESTERROR	ADJ_ESTERROR
+#define MOD_STATUS	ADJ_STATUS
+#define MOD_TIMECONST	ADJ_TIMECONST
+#define MOD_CLKB	ADJ_TICK
+#define MOD_CLKA	ADJ_OFFSET_SINGLESHOT /* 0x8000 in original */
+
+
+/* Status codes (timex.status) */
+#define STA_PLL		0x0001	/* enable PLL updates (rw) */
+#define STA_PPSFREQ	0x0002	/* enable PPS freq discipline (rw) */
+#define STA_PPSTIME	0x0004	/* enable PPS time discipline (rw) */
+#define STA_FLL		0x0008	/* select frequency-lock mode (rw) */
+
+#define STA_INS		0x0010	/* insert leap (rw) */
+#define STA_DEL		0x0020	/* delete leap (rw) */
+#define STA_UNSYNC	0x0040	/* clock unsynchronized (rw) */
+#define STA_FREQHOLD	0x0080	/* hold frequency (rw) */
+
+#define STA_PPSSIGNAL	0x0100	/* PPS signal present (ro) */
+#define STA_PPSJITTER	0x0200	/* PPS signal jitter exceeded (ro) */
+#define STA_PPSWANDER	0x0400	/* PPS signal wander exceeded (ro) */
+#define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
+
+#define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
+
+#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
+    STA_PPSERROR | STA_CLOCKERR) /* read-only bits */
+
+/* Clock states (time_state) */
+#define TIME_OK		0	/* clock synchronized, no leap second */
+#define TIME_INS	1	/* insert leap second */
+#define TIME_DEL	2	/* delete leap second */
+#define TIME_OOP	3	/* leap second in progress */
+#define TIME_WAIT	4	/* leap second has occurred */
+#define TIME_ERROR	5	/* clock not synchronized */
+#define TIME_BAD	TIME_ERROR /* bw compat */
 
 __BEGIN_DECLS