ia64: relocate out of ports/ subdir

1 files changed, 905 insertions, 0 deletions

diff --git a/sysdeps/ia64/fpu/e_sinh.S b/sysdeps/ia64/fpu/e_sinh.S
new file mode 100644
index 0000000000..f60907b72b
--- /dev/null
+++ b/sysdeps/ia64/fpu/e_sinh.S
@@ -0,0 +1,905 @@
+.file "sinh.s"
+
+
+// Copyright (c) 2000 - 2005, Intel Corporation
+// All rights reserved.
+//
+// Contributed 2000 by the Intel Numerics Group, Intel Corporation
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+// * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//
+// * Redistributions in binary form must reproduce the above copyright
+// notice, this list of conditions and the following disclaimer in the
+// documentation and/or other materials provided with the distribution.
+//
+// * The name of Intel Corporation may not be used to endorse or promote
+// products derived from this software without specific prior written
+// permission.
+
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR ITS
+// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
+// OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+// Intel Corporation is the author of this code, and requests that all
+// problem reports or change requests be submitted to it directly at
+// http://www.intel.com/software/products/opensource/libraries/num.htm.
+//
+// History
+//==============================================================
+// 02/02/00 Initial version
+// 04/04/00 Unwind support added
+// 08/15/00 Bundle added after call to __libm_error_support to properly
+//          set [the previously overwritten] GR_Parameter_RESULT.
+// 10/12/00 Update to set denormal operand and underflow flags
+// 01/22/01 Fixed to set inexact flag for small args.
+// 05/02/01 Reworked to improve speed of all paths
+// 05/20/02 Cleaned up namespace and sf0 syntax
+// 11/20/02 Improved speed with new algorithm
+// 03/31/05 Reformatted delimiters between data tables
+
+// API
+//==============================================================
+// double sinh(double)
+
+// Overview of operation
+//==============================================================
+// Case 1:  0 < |x| < 2^-60
+//  Result = x, computed by x+sgn(x)*x^2) to handle flags and rounding
+//
+// Case 2:  2^-60 < |x| < 0.25
+//  Evaluate sinh(x) by a 13th order polynomial
+//  Care is take for the order of multiplication; and A1 is not exactly 1/3!,
+//  A2 is not exactly 1/5!, etc.
+//  sinh(x) = x + (A1*x^3 + A2*x^5 + A3*x^7 + A4*x^9 + A5*x^11 + A6*x^13)
+//
+// Case 3:  0.25 < |x| < 710.47586
+//  Algorithm is based on the identity sinh(x) = ( exp(x) - exp(-x) ) / 2.
+//  The algorithm for exp is described as below.  There are a number of
+//  economies from evaluating both exp(x) and exp(-x).  Although we
+//  are evaluating both quantities, only where the quantities diverge do we
+//  duplicate the computations.  The basic algorithm for exp(x) is described
+//  below.
+//
+// Take the input x. w is "how many log2/128 in x?"
+//  w = x * 128/log2
+//  n = int(w)
+//  x = n log2/128 + r + delta
+
+//  n = 128M + index_1 + 2^4 index_2
+//  x = M log2 + (log2/128) index_1 + (log2/8) index_2 + r + delta
+
+//  exp(x) = 2^M  2^(index_1/128)  2^(index_2/8) exp(r) exp(delta)
+//       Construct 2^M
+//       Get 2^(index_1/128) from table_1;
+//       Get 2^(index_2/8)   from table_2;
+//       Calculate exp(r) by 5th order polynomial
+//          r = x - n (log2/128)_high
+//          delta = - n (log2/128)_low
+//       Calculate exp(delta) as 1 + delta
+
+
+// Special values
+//==============================================================
+// sinh(+0)    = +0
+// sinh(-0)    = -0
+
+// sinh(+qnan) = +qnan
+// sinh(-qnan) = -qnan
+// sinh(+snan) = +qnan
+// sinh(-snan) = -qnan
+
+// sinh(-inf)  = -inf
+// sinh(+inf)  = +inf
+
+// Overflow and Underflow
+//=======================
+// sinh(x) = largest double normal when
+//     |x| = 710.47586 = 0x408633ce8fb9f87d
+//
+// Underflow is handled as described in case 1 above
+
+// Registers used
+//==============================================================
+// Floating Point registers used:
+// f8, input, output
+// f6 -> f15,  f32 -> f61
+
+// General registers used:
+// r14 -> r40
+
+// Predicate registers used:
+// p6 -> p15
+
+// Assembly macros
+//==============================================================
+
+rRshf                 = r14
+rN_neg                = r14
+rAD_TB1               = r15
+rAD_TB2               = r16
+rAD_P                 = r17
+rN                    = r18
+rIndex_1              = r19
+rIndex_2_16           = r20
+rM                    = r21
+rBiased_M             = r21
+rSig_inv_ln2          = r22
+rIndex_1_neg          = r22
+rExp_bias             = r23
+rExp_bias_minus_1     = r23
+rExp_mask             = r24
+rTmp                  = r24
+rGt_ln                = r24
+rIndex_2_16_neg       = r24
+rM_neg                = r25
+rBiased_M_neg         = r25
+rRshf_2to56           = r26
+rAD_T1_neg            = r26
+rExp_2tom56           = r28
+rAD_T2_neg            = r28
+rAD_T1                = r29
+rAD_T2                = r30
+rSignexp_x            = r31
+rExp_x                = r31
+
+GR_SAVE_B0            = r33
+GR_SAVE_PFS           = r34
+GR_SAVE_GP            = r35
+
+GR_Parameter_X        = r37
+GR_Parameter_Y        = r38
+GR_Parameter_RESULT   = r39
+GR_Parameter_TAG      = r40
+
+
+FR_X                  = f10
+FR_Y                  = f1
+FR_RESULT             = f8
+
+fRSHF_2TO56           = f6
+fINV_LN2_2TO63        = f7
+fW_2TO56_RSH          = f9
+f2TOM56               = f11
+fP5                   = f12
+fP4                   = f13
+fP3                   = f14
+fP2                   = f15
+
+fLn2_by_128_hi        = f33
+fLn2_by_128_lo        = f34
+
+fRSHF                 = f35
+fNfloat               = f36
+fNormX                = f37
+fR                    = f38
+fF                    = f39
+
+fRsq                  = f40
+f2M                   = f41
+fS1                   = f42
+fT1                   = f42
+fS2                   = f43
+fT2                   = f43
+fS                    = f43
+fWre_urm_f8           = f44
+fAbsX                 = f44
+
+fMIN_DBL_OFLOW_ARG    = f45
+fMAX_DBL_NORM_ARG     = f46
+fXsq                  = f47
+fX4                   = f48
+fGt_pln               = f49
+fTmp                  = f49
+
+fP54                  = f50
+fP5432                = f50
+fP32                  = f51
+fP                    = f52
+fP54_neg              = f53
+fP5432_neg            = f53
+fP32_neg              = f54
+fP_neg                = f55
+fF_neg                = f56
+
+f2M_neg               = f57
+fS1_neg               = f58
+fT1_neg               = f58
+fS2_neg               = f59
+fT2_neg               = f59
+fS_neg                = f59
+fExp                  = f60
+fExp_neg              = f61
+
+fA6                   = f50
+fA65                  = f50
+fA6543                = f50
+fA654321              = f50
+fA5                   = f51
+fA4                   = f52
+fA43                  = f52
+fA3                   = f53
+fA2                   = f54
+fA21                  = f54
+fA1                   = f55
+fX3                   = f56
+
+// Data tables
+//==============================================================
+
+RODATA
+.align 16
+
+// ************* DO NOT CHANGE ORDER OF THESE TABLES ********************
+
+// double-extended 1/ln(2)
+// 3fff b8aa 3b29 5c17 f0bb be87fed0691d3e88
+// 3fff b8aa 3b29 5c17 f0bc
+// For speed the significand will be loaded directly with a movl and setf.sig
+//   and the exponent will be bias+63 instead of bias+0.  Thus subsequent
+//   computations need to scale appropriately.
+// The constant 128/ln(2) is needed for the computation of w.  This is also
+//   obtained by scaling the computations.
+//
+// Two shifting constants are loaded directly with movl and setf.d.
+//   1. fRSHF_2TO56 = 1.1000..00 * 2^(63-7)
+//        This constant is added to x*1/ln2 to shift the integer part of
+//        x*128/ln2 into the rightmost bits of the significand.
+//        The result of this fma is fW_2TO56_RSH.
+//   2. fRSHF       = 1.1000..00 * 2^(63)
+//        This constant is subtracted from fW_2TO56_RSH * 2^(-56) to give
+//        the integer part of w, n, as a floating-point number.
+//        The result of this fms is fNfloat.
+
+
+LOCAL_OBJECT_START(exp_table_1)
+data8 0x408633ce8fb9f87e // smallest dbl overflow arg
+data8 0x408633ce8fb9f87d // largest dbl arg to give normal dbl result
+data8 0xb17217f7d1cf79ab , 0x00003ff7 // ln2/128 hi
+data8 0xc9e3b39803f2f6af , 0x00003fb7 // ln2/128 lo
+//
+// Table 1 is 2^(index_1/128) where
+// index_1 goes from 0 to 15
+//
+data8 0x8000000000000000 , 0x00003FFF
+data8 0x80B1ED4FD999AB6C , 0x00003FFF
+data8 0x8164D1F3BC030773 , 0x00003FFF
+data8 0x8218AF4373FC25EC , 0x00003FFF
+data8 0x82CD8698AC2BA1D7 , 0x00003FFF
+data8 0x8383594EEFB6EE37 , 0x00003FFF
+data8 0x843A28C3ACDE4046 , 0x00003FFF
+data8 0x84F1F656379C1A29 , 0x00003FFF
+data8 0x85AAC367CC487B15 , 0x00003FFF
+data8 0x8664915B923FBA04 , 0x00003FFF
+data8 0x871F61969E8D1010 , 0x00003FFF
+data8 0x87DB357FF698D792 , 0x00003FFF
+data8 0x88980E8092DA8527 , 0x00003FFF
+data8 0x8955EE03618E5FDD , 0x00003FFF
+data8 0x8A14D575496EFD9A , 0x00003FFF
+data8 0x8AD4C6452C728924 , 0x00003FFF
+LOCAL_OBJECT_END(exp_table_1)
+
+// Table 2 is 2^(index_1/8) where
+// index_2 goes from 0 to 7
+LOCAL_OBJECT_START(exp_table_2)
+data8 0x8000000000000000 , 0x00003FFF
+data8 0x8B95C1E3EA8BD6E7 , 0x00003FFF
+data8 0x9837F0518DB8A96F , 0x00003FFF
+data8 0xA5FED6A9B15138EA , 0x00003FFF
+data8 0xB504F333F9DE6484 , 0x00003FFF
+data8 0xC5672A115506DADD , 0x00003FFF
+data8 0xD744FCCAD69D6AF4 , 0x00003FFF
+data8 0xEAC0C6E7DD24392F , 0x00003FFF
+LOCAL_OBJECT_END(exp_table_2)
+
+
+LOCAL_OBJECT_START(exp_p_table)
+data8 0x3f8111116da21757 //P5
+data8 0x3fa55555d787761c //P4
+data8 0x3fc5555555555414 //P3
+data8 0x3fdffffffffffd6a //P2
+LOCAL_OBJECT_END(exp_p_table)
+
+LOCAL_OBJECT_START(sinh_p_table)
+data8 0xB08AF9AE78C1239F, 0x00003FDE  // A6
+data8 0xB8EF1D28926D8891, 0x00003FEC  // A4
+data8 0x8888888888888412, 0x00003FF8  // A2
+data8 0xD732377688025BE9, 0x00003FE5  // A5
+data8 0xD00D00D00D4D39F2, 0x00003FF2  // A3
+data8 0xAAAAAAAAAAAAAAAB, 0x00003FFC  // A1
+LOCAL_OBJECT_END(sinh_p_table)
+
+
+.section .text
+GLOBAL_IEEE754_ENTRY(sinh)
+
+{ .mlx
+      getf.exp        rSignexp_x = f8  // Must recompute if x unorm
+      movl            rSig_inv_ln2 = 0xb8aa3b295c17f0bc  // significand of 1/ln2
+}
+{ .mlx
+      addl            rAD_TB1    = @ltoff(exp_table_1), gp
+      movl            rRshf_2to56 = 0x4768000000000000   // 1.10000 2^(63+56)
+}
+;;
+
+{ .mfi
+      ld8             rAD_TB1    = [rAD_TB1]
+      fclass.m        p6,p0 = f8,0x0b  // Test for x=unorm
+      mov             rExp_mask = 0x1ffff
+}
+{ .mfi
+      mov             rExp_bias = 0xffff
+      fnorm.s1        fNormX   = f8
+      mov             rExp_2tom56 = 0xffff-56
+}
+;;
+
+// Form two constants we need
+//  1/ln2 * 2^63  to compute  w = x * 1/ln2 * 128
+//  1.1000..000 * 2^(63+63-7) to right shift int(w) into the significand
+
+{ .mfi
+      setf.sig        fINV_LN2_2TO63 = rSig_inv_ln2 // form 1/ln2 * 2^63
+      fclass.m        p8,p0 = f8,0x07  // Test for x=0
+      nop.i 999
+}
+{ .mlx
+      setf.d          fRSHF_2TO56 = rRshf_2to56 // Form const 1.100 * 2^(63+56)
+      movl            rRshf = 0x43e8000000000000 // 1.10000 2^63 for right shift
+}
+;;
+
+{ .mfi
+      ldfpd           fMIN_DBL_OFLOW_ARG, fMAX_DBL_NORM_ARG = [rAD_TB1],16
+      fclass.m        p10,p0 = f8,0x1e3  // Test for x=inf, nan, NaT
+      nop.i           0
+}
+{ .mfb
+      setf.exp        f2TOM56 = rExp_2tom56 // form 2^-56 for scaling Nfloat
+      nop.f           0
+(p6)  br.cond.spnt    SINH_UNORM            // Branch if x=unorm
+}
+;;
+
+SINH_COMMON:
+{ .mfi
+      ldfe            fLn2_by_128_hi  = [rAD_TB1],16
+      nop.f           0
+      nop.i           0
+}
+{ .mfb
+      setf.d          fRSHF = rRshf // Form right shift const 1.100 * 2^63
+      nop.f           0
+(p8)  br.ret.spnt     b0                    // Exit for x=0, result=x
+}
+;;
+
+{ .mfi
+      ldfe            fLn2_by_128_lo  = [rAD_TB1],16
+      nop.f           0
+      nop.i           0
+}
+{ .mfb
+      and             rExp_x = rExp_mask, rSignexp_x // Biased exponent of x
+(p10) fma.d.s0        f8 = f8,f1,f0  // Result if x=inf, nan, NaT
+(p10) br.ret.spnt     b0               // quick exit for x=inf, nan, NaT
+}
+;;
+
+// After that last load rAD_TB1 points to the beginning of table 1
+{ .mfi
+      nop.m           0
+      fcmp.eq.s0      p6,p0 = f8, f0       // Dummy to set D
+      sub             rExp_x = rExp_x, rExp_bias // True exponent of x
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fmerge.s        fAbsX = f0, fNormX   // Form |x|
+      nop.i           0
+}
+{ .mfb
+      cmp.gt          p7, p0 = -2, rExp_x      // Test |x| < 2^(-2)
+      fma.s1          fXsq = fNormX, fNormX, f0  // x*x for small path
+(p7)  br.cond.spnt    SINH_SMALL               // Branch if 0 < |x| < 2^-2
+}
+;;
+
+// W = X * Inv_log2_by_128
+// By adding 1.10...0*2^63 we shift and get round_int(W) in significand.
+// We actually add 1.10...0*2^56 to X * Inv_log2 to do the same thing.
+
+{ .mfi
+      add             rAD_P = 0x180, rAD_TB1
+      fma.s1          fW_2TO56_RSH  = fNormX, fINV_LN2_2TO63, fRSHF_2TO56
+      add             rAD_TB2 = 0x100, rAD_TB1
+}
+;;
+
+// Divide arguments into the following categories:
+//  Certain Safe                - 0.25 <= |x| <= MAX_DBL_NORM_ARG
+//  Possible Overflow       p14 - MAX_DBL_NORM_ARG < |x| < MIN_DBL_OFLOW_ARG
+//  Certain Overflow        p15 - MIN_DBL_OFLOW_ARG <= |x| < +inf
+//
+// If the input is really a double arg, then there will never be
+// "Possible Overflow" arguments.
+//
+
+{ .mfi
+      ldfpd           fP5, fP4  = [rAD_P] ,16
+      fcmp.ge.s1      p15,p14 = fAbsX,fMIN_DBL_OFLOW_ARG
+      nop.i           0
+}
+;;
+
+// Nfloat = round_int(W)
+// The signficand of fW_2TO56_RSH contains the rounded integer part of W,
+// as a twos complement number in the lower bits (that is, it may be negative).
+// That twos complement number (called N) is put into rN.
+
+// Since fW_2TO56_RSH is scaled by 2^56, it must be multiplied by 2^-56
+// before the shift constant 1.10000 * 2^63 is subtracted to yield fNfloat.
+// Thus, fNfloat contains the floating point version of N
+
+{ .mfi
+      ldfpd           fP3, fP2  = [rAD_P]
+(p14) fcmp.gt.unc.s1  p14,p0 = fAbsX,fMAX_DBL_NORM_ARG
+      nop.i           0
+}
+{ .mfb
+      nop.m           0
+      fms.s1          fNfloat = fW_2TO56_RSH, f2TOM56, fRSHF
+(p15) br.cond.spnt    SINH_CERTAIN_OVERFLOW
+}
+;;
+
+{ .mfi
+      getf.sig        rN        = fW_2TO56_RSH
+      nop.f           0
+      mov             rExp_bias_minus_1 = 0xfffe
+}
+;;
+
+// rIndex_1 has index_1
+// rIndex_2_16 has index_2 * 16
+// rBiased_M has M
+
+// rM has true M
+// r = x - Nfloat * ln2_by_128_hi
+// f = 1 - Nfloat * ln2_by_128_lo
+{ .mfi
+      and             rIndex_1 = 0x0f, rN
+      fnma.s1         fR   = fNfloat, fLn2_by_128_hi, fNormX
+      shr             rM = rN,  0x7
+}
+{ .mfi
+      and             rIndex_2_16 = 0x70, rN
+      fnma.s1         fF   = fNfloat, fLn2_by_128_lo, f1
+      sub             rN_neg = r0, rN
+}
+;;
+
+{ .mmi
+      and             rIndex_1_neg = 0x0f, rN_neg
+      add             rBiased_M = rExp_bias_minus_1, rM
+      shr             rM_neg = rN_neg,  0x7
+}
+{ .mmi
+      and             rIndex_2_16_neg = 0x70, rN_neg
+      add             rAD_T2 = rAD_TB2, rIndex_2_16
+      shladd          rAD_T1 = rIndex_1, 4, rAD_TB1
+}
+;;
+
+// rAD_T1 has address of T1
+// rAD_T2 has address if T2
+
+{ .mmi
+      setf.exp        f2M = rBiased_M
+      ldfe            fT2  = [rAD_T2]
+      nop.i           0
+}
+{ .mmi
+      add             rBiased_M_neg = rExp_bias_minus_1, rM_neg
+      add             rAD_T2_neg = rAD_TB2, rIndex_2_16_neg
+      shladd          rAD_T1_neg = rIndex_1_neg, 4, rAD_TB1
+}
+;;
+
+// Create Scale = 2^M
+// Load T1 and T2
+{ .mmi
+      ldfe            fT1  = [rAD_T1]
+      nop.m           0
+      nop.i           0
+}
+{ .mmf
+      setf.exp        f2M_neg = rBiased_M_neg
+      ldfe            fT2_neg  = [rAD_T2_neg]
+      fma.s1          fF_neg   = fNfloat, fLn2_by_128_lo, f1
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fma.s1          fRsq = fR, fR, f0
+      nop.i           0
+}
+{ .mfi
+      ldfe            fT1_neg  = [rAD_T1_neg]
+      fma.s1          fP54 = fR, fP5, fP4
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fma.s1          fP32 = fR, fP3, fP2
+      nop.i           0
+}
+{ .mfi
+      nop.m           0
+      fnma.s1         fP54_neg = fR, fP5, fP4
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fnma.s1         fP32_neg = fR, fP3, fP2
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fma.s1          fP5432  = fRsq, fP54, fP32
+      nop.i           0
+}
+{ .mfi
+      nop.m           0
+      fma.s1          fS2  = fF,fT2,f0
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fma.s1          fS1  = f2M,fT1,f0
+      nop.i           0
+}
+{ .mfi
+      nop.m           0
+      fma.s1          fP5432_neg  = fRsq, fP54_neg, fP32_neg
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fma.s1          fS1_neg  = f2M_neg,fT1_neg,f0
+      nop.i           0
+}
+{ .mfi
+      nop.m           0
+      fma.s1          fS2_neg  = fF_neg,fT2_neg,f0
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fma.s1          fP     = fRsq, fP5432, fR
+      nop.i           0
+}
+{ .mfi
+      nop.m           0
+      fma.s1          fS   = fS1,fS2,f0
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fms.s1          fP_neg     = fRsq, fP5432_neg, fR
+      nop.i           0
+}
+{ .mfi
+      nop.m           0
+      fma.s1          fS_neg   = fS1_neg,fS2_neg,f0
+      nop.i           0
+}
+;;
+
+{ .mfb
+      nop.m           0
+      fmpy.s0         fTmp = fLn2_by_128_lo, fLn2_by_128_lo // Force inexact
+(p14) br.cond.spnt    SINH_POSSIBLE_OVERFLOW
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fma.s1          fExp = fS, fP, fS
+      nop.i           0
+}
+{ .mfi
+      nop.m           0
+      fma.s1          fExp_neg = fS_neg, fP_neg, fS_neg
+      nop.i           0
+}
+;;
+
+{ .mfb
+      nop.m           0
+      fms.d.s0        f8 = fExp, f1, fExp_neg
+      br.ret.sptk     b0                  // Normal path exit
+}
+;;
+
+// Here if 0 < |x| < 0.25
+SINH_SMALL:
+{ .mfi
+      add             rAD_T1 = 0x1a0, rAD_TB1
+      fcmp.lt.s1      p7, p8 = fNormX, f0       // Test sign of x
+      cmp.gt          p6, p0 = -60, rExp_x      // Test |x| < 2^(-60)
+}
+{ .mfi
+      add             rAD_T2 = 0x1d0, rAD_TB1
+      nop.f           0
+      nop.i           0
+}
+;;
+
+{ .mmb
+      ldfe            fA6 = [rAD_T1],16
+      ldfe            fA5 = [rAD_T2],16
+(p6)  br.cond.spnt    SINH_VERY_SMALL           // Branch if |x| < 2^(-60)
+}
+;;
+
+{ .mmi
+      ldfe            fA4 = [rAD_T1],16
+      ldfe            fA3 = [rAD_T2],16
+      nop.i           0
+}
+;;
+
+{ .mmi
+      ldfe            fA2 = [rAD_T1]
+      ldfe            fA1 = [rAD_T2]
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fma.s1          fX3 = fNormX, fXsq, f0
+      nop.i           0
+}
+{ .mfi
+      nop.m           0
+      fma.s1          fX4 = fXsq, fXsq, f0
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fma.s1          fA65 = fXsq, fA6, fA5
+      nop.i           0
+}
+{ .mfi
+      nop.m           0
+      fma.s1          fA43 = fXsq, fA4, fA3
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fma.s1          fA21 = fXsq, fA2, fA1
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fma.s1          fA6543 = fX4, fA65, fA43
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fma.s1          fA654321 = fX4, fA6543, fA21
+      nop.i           0
+}
+;;
+
+// Dummy multiply to generate inexact
+{ .mfi
+      nop.m           0
+      fmpy.s0         fTmp = fA6, fA6
+      nop.i           0
+}
+{ .mfb
+      nop.m           0
+      fma.d.s0        f8 = fA654321, fX3, fNormX
+      br.ret.sptk     b0                // Exit if 2^-60 < |x| < 0.25
+}
+;;
+
+SINH_VERY_SMALL:
+// Here if 0 < |x| < 2^-60
+// Compute result by x + sgn(x)*x^2 to get properly rounded result
+.pred.rel "mutex",p7,p8
+{ .mfi
+      nop.m           0
+(p7)  fnma.d.s0       f8 = fNormX, fNormX, fNormX // If x<0 result ~ x-x^2
+      nop.i           0
+}
+{ .mfb
+      nop.m           0
+(p8)  fma.d.s0        f8 = fNormX, fNormX, fNormX // If x>0 result ~ x+x^2
+      br.ret.sptk     b0                          // Exit if |x| < 2^-60
+}
+;;
+
+
+SINH_POSSIBLE_OVERFLOW:
+
+// Here if fMAX_DBL_NORM_ARG < |x| < fMIN_DBL_OFLOW_ARG
+// This cannot happen if input is a double, only if input higher precision.
+// Overflow is a possibility, not a certainty.
+
+// Recompute result using status field 2 with user's rounding mode,
+// and wre set.  If result is larger than largest double, then we have
+// overflow
+
+{ .mfi
+      mov             rGt_ln  = 0x103ff // Exponent for largest dbl + 1 ulp
+      fsetc.s2        0x7F,0x42         // Get user's round mode, set wre
+      nop.i           0
+}
+;;
+
+{ .mfi
+      setf.exp        fGt_pln = rGt_ln  // Create largest double + 1 ulp
+      fma.d.s2        fWre_urm_f8 = fS, fP, fS    // Result with wre set
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fsetc.s2        0x7F,0x40                   // Turn off wre in sf2
+      nop.i           0
+}
+;;
+
+{ .mfi
+      nop.m           0
+      fcmp.ge.s1      p6, p0 =  fWre_urm_f8, fGt_pln // Test for overflow
+      nop.i           0
+}
+;;
+
+{ .mfb
+      nop.m           0
+      nop.f           0
+(p6)  br.cond.spnt    SINH_CERTAIN_OVERFLOW // Branch if overflow
+}
+;;
+
+{ .mfb
+      nop.m           0
+      fma.d.s0        f8 = fS, fP, fS
+      br.ret.sptk     b0                     // Exit if really no overflow
+}
+;;
+
+SINH_CERTAIN_OVERFLOW:
+{ .mfi
+      sub             rTmp = rExp_mask, r0, 1
+      fcmp.lt.s1      p6, p7 = fNormX, f0    // Test for x < 0
+      nop.i           0
+}
+;;
+
+{ .mmf
+      alloc           r32=ar.pfs,1,4,4,0
+      setf.exp        fTmp = rTmp
+      fmerge.s        FR_X = f8,f8
+}
+;;
+
+{ .mfi
+      mov             GR_Parameter_TAG = 127
+(p6)  fnma.d.s0       FR_RESULT = fTmp, fTmp, f0    // Set I,O and -INF result
+      nop.i           0
+}
+{ .mfb
+      nop.m           0
+(p7)  fma.d.s0        FR_RESULT = fTmp, fTmp, f0    // Set I,O and +INF result
+      br.cond.sptk    __libm_error_region
+}
+;;
+
+// Here if x unorm
+SINH_UNORM:
+{ .mfb
+      getf.exp        rSignexp_x = fNormX    // Must recompute if x unorm
+      fcmp.eq.s0      p6, p0 = f8, f0        // Set D flag
+      br.cond.sptk    SINH_COMMON
+}
+;;
+
+GLOBAL_IEEE754_END(sinh)
+
+
+LOCAL_LIBM_ENTRY(__libm_error_region)
+.prologue
+{ .mfi
+        add   GR_Parameter_Y=-32,sp             // Parameter 2 value
+        nop.f 0
+.save   ar.pfs,GR_SAVE_PFS
+        mov  GR_SAVE_PFS=ar.pfs                 // Save ar.pfs
+}
+{ .mfi
+.fframe 64
+        add sp=-64,sp                           // Create new stack
+        nop.f 0
+        mov GR_SAVE_GP=gp                       // Save gp
+};;
+{ .mmi
+        stfd [GR_Parameter_Y] = FR_Y,16         // STORE Parameter 2 on stack
+        add GR_Parameter_X = 16,sp              // Parameter 1 address
+.save   b0, GR_SAVE_B0
+        mov GR_SAVE_B0=b0                       // Save b0
+};;
+.body
+{ .mib
+        stfd [GR_Parameter_X] = FR_X            // STORE Parameter 1 on stack
+        add   GR_Parameter_RESULT = 0,GR_Parameter_Y  // Parameter 3 address
+        nop.b 0
+}
+{ .mib
+        stfd [GR_Parameter_Y] = FR_RESULT       // STORE Parameter 3 on stack
+        add   GR_Parameter_Y = -16,GR_Parameter_Y
+        br.call.sptk b0=__libm_error_support#   // Call error handling function
+};;
+{ .mmi
+        add   GR_Parameter_RESULT = 48,sp
+        nop.m 0
+        nop.i 0
+};;
+{ .mmi
+        ldfd  f8 = [GR_Parameter_RESULT]       // Get return result off stack
+.restore sp
+        add   sp = 64,sp                       // Restore stack pointer
+        mov   b0 = GR_SAVE_B0                  // Restore return address
+};;
+{ .mib
+        mov   gp = GR_SAVE_GP                  // Restore gp
+        mov   ar.pfs = GR_SAVE_PFS             // Restore ar.pfs
+        br.ret.sptk     b0                     // Return
+};;
+
+LOCAL_LIBM_END(__libm_error_region)
+.type   __libm_error_support#,@function
+.global __libm_error_support#