Moved alpha to ports repository.

2008-11-25  Roland McGrath  <roland@redhat.com>

	* sysdeps/alpha, sysdeps/unix/bsd/osf/alpha,
	sysdeps/unix/bsd/Attic/osf1/alpha, sysdeps/unix/sysv/linux/alpha,
	sysdeps/unix/sysv/linux/alpha/alpha, sysdeps/unix/alpha,
	sysdeps/mach/alpha, sysdeps/mach/hurd/alpha:
	Subdirectories moved to ports repository.
	* configure.in (base_machine): Remove alpha case.

1 files changed, 0 insertions, 272 deletions

diff --git a/sysdeps/alpha/remqu.S b/sysdeps/alpha/remqu.S
deleted file mode 100644
index 398a345a18..0000000000
--- a/sysdeps/alpha/remqu.S
+++ /dev/null
@@ -1,272 +0,0 @@
-/* Copyright (C) 2004 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#include "div_libc.h"
-
-
-/* 64-bit unsigned long remainder.  These are not normal C functions.  Argument
-   registers are t10 and t11, the result goes in t12.  Only t12 and AT may be
-   clobbered.
-
-   Theory of operation here is that we can use the FPU divider for virtually
-   all operands that we see: all dividend values between -2**53 and 2**53-1
-   can be computed directly.  Note that divisor values need not be checked
-   against that range because the rounded fp value will be close enough such
-   that the quotient is < 1, which will properly be truncated to zero when we
-   convert back to integer.
-
-   When the dividend is outside the range for which we can compute exact
-   results, we use the fp quotent as an estimate from which we begin refining
-   an exact integral value.  This reduces the number of iterations in the
-   shift-and-subtract loop significantly.
-
-   The FPCR save/restore is due to the fact that the EV6 _will_ set FPCR_INE
-   for cvttq/c even without /sui being set.  It will not, however, properly
-   raise the exception, so we don't have to worry about FPCR_INED being clear
-   and so dying by SIGFPE.  */
-
-	.text
-	.align	4
-	.globl	__remqu
-	.type	__remqu, @funcnoplt
-	.usepv	__remqu, no
-
-	cfi_startproc
-	cfi_return_column (RA)
-__remqu:
-	lda	sp, -FRAME(sp)
-	cfi_def_cfa_offset (FRAME)
-	CALL_MCOUNT
-
-	/* Get the fp divide insn issued as quickly as possible.  After
-	   that's done, we have at least 22 cycles until its results are
-	   ready -- all the time in the world to figure out how we're
-	   going to use the results.  */
-	subq	Y, 1, AT
-	stt	$f0, 0(sp)
-	and	Y, AT, AT
-
-	stt	$f1, 8(sp)
-	excb
-	stt	$f3, 48(sp)
-	beq	AT, $powerof2
-	cfi_rel_offset ($f0, 0)
-	cfi_rel_offset ($f1, 8)
-	cfi_rel_offset ($f3, 48)
-
-	_ITOFT2	X, $f0, 16, Y, $f1, 24
-	mf_fpcr	$f3
-	cvtqt	$f0, $f0
-	cvtqt	$f1, $f1
-
-	blt	X, $x_is_neg
-	divt/c	$f0, $f1, $f0
-
-	/* Check to see if Y was mis-converted as signed value.  */
-	ldt	$f1, 8(sp)
-	blt	Y, $y_is_neg
-
-	/* Check to see if X fit in the double as an exact value.  */
-	srl	X, 53, AT
-	bne	AT, $x_big
-
-	/* If we get here, we're expecting exact results from the division.
-	   Do nothing else besides convert, compute remainder, clean up.  */
-	cvttq/c	$f0, $f0
-	excb
-	mt_fpcr	$f3
-	_FTOIT	$f0, AT, 16
-
-	mulq	AT, Y, AT
-	ldt	$f0, 0(sp)
-	ldt	$f3, 48(sp)
-	lda	sp, FRAME(sp)
-	cfi_remember_state
-	cfi_restore ($f0)
-	cfi_restore ($f1)
-	cfi_restore ($f3)
-	cfi_def_cfa_offset (0)
-
-	.align	4
-	subq	X, AT, RV
-	ret	$31, (RA), 1
-
-	.align	4
-	cfi_restore_state
-$x_is_neg:
-	/* If we get here, X is so big that bit 63 is set, which made the
-	   conversion come out negative.  Fix it up lest we not even get
-	   a good estimate.  */
-	ldah	AT, 0x5f80		/* 2**64 as float.  */
-	stt	$f2, 24(sp)
-	cfi_rel_offset ($f2, 24)
-	_ITOFS	AT, $f2, 16
-
-	addt	$f0, $f2, $f0
-	divt/c	$f0, $f1, $f0
-
-	/* Ok, we've now the divide issued.  Continue with other checks.  */
-	.align	4
-	ldt	$f1, 8(sp)
-	unop
-	ldt	$f2, 24(sp)
-	blt	Y, $y_is_neg
-	cfi_restore ($f1)
-	cfi_restore ($f2)
-	cfi_remember_state	/* for y_is_neg */
-
-	.align	4
-$x_big:
-	/* If we get here, X is large enough that we don't expect exact
-	   results, and neither X nor Y got mis-translated for the fp
-	   division.  Our task is to take the fp result, figure out how
-	   far it's off from the correct result and compute a fixup.  */
-	stq	t0, 16(sp)
-	stq	t1, 24(sp)
-	stq	t2, 32(sp)
-	stq	t3, 40(sp)
-	cfi_rel_offset (t0, 16)
-	cfi_rel_offset (t1, 24)
-	cfi_rel_offset (t2, 32)
-	cfi_rel_offset (t3, 40)
-
-#define Q	t0		/* quotient */
-#define R	RV		/* remainder */
-#define SY	t1		/* scaled Y */
-#define S	t2		/* scalar */
-#define QY	t3		/* Q*Y */
-
-	cvttq/c	$f0, $f0
-	_FTOIT	$f0, Q, 8
-	mulq	Q, Y, QY
-
-	.align	4
-	stq	t4, 8(sp)
-	excb
-	ldt	$f0, 0(sp)
-	mt_fpcr	$f3
-	cfi_rel_offset (t4, 8)
-	cfi_restore ($f0)
-
-	subq	QY, X, R
-	mov	Y, SY
-	mov	1, S
-	bgt	R, $q_high
-
-$q_high_ret:
-	subq	X, QY, R
-	mov	Y, SY
-	mov	1, S
-	bgt	R, $q_low
-
-$q_low_ret:
-	ldq	t4, 8(sp)
-	ldq	t0, 16(sp)
-	ldq	t1, 24(sp)
-	ldq	t2, 32(sp)
-
-	ldq	t3, 40(sp)
-	ldt	$f3, 48(sp)
-	lda	sp, FRAME(sp)
-	cfi_remember_state
-	cfi_restore (t0)
-	cfi_restore (t1)
-	cfi_restore (t2)
-	cfi_restore (t3)
-	cfi_restore (t4)
-	cfi_restore ($f3)
-	cfi_def_cfa_offset (0)
-	ret	$31, (RA), 1
-
-	.align	4
-	cfi_restore_state
-	/* The quotient that we computed was too large.  We need to reduce
-	   it by S such that Y*S >= R.  Obviously the closer we get to the
-	   correct value the better, but overshooting high is ok, as we'll
-	   fix that up later.  */
-0:
-	addq	SY, SY, SY
-	addq	S, S, S
-$q_high:
-	cmpult	SY, R, AT
-	bne	AT, 0b
-
-	subq	Q, S, Q
-	unop
-	subq	QY, SY, QY
-	br	$q_high_ret
-
-	.align	4
-	/* The quotient that we computed was too small.  Divide Y by the 
-	   current remainder (R) and add that to the existing quotient (Q).
-	   The expectation, of course, is that R is much smaller than X.  */
-	/* Begin with a shift-up loop.  Compute S such that Y*S >= R.  We
-	   already have a copy of Y in SY and the value 1 in S.  */
-0:
-	addq	SY, SY, SY
-	addq	S, S, S
-$q_low:
-	cmpult	SY, R, AT
-	bne	AT, 0b
-
-	/* Shift-down and subtract loop.  Each iteration compares our scaled
-	   Y (SY) with the remainder (R); if SY <= R then X is divisible by
-	   Y's scalar (S) so add it to the quotient (Q).  */
-2:	addq	Q, S, t3
-	srl	S, 1, S
-	cmpule	SY, R, AT
-	subq	R, SY, t4
-
-	cmovne	AT, t3, Q
-	cmovne	AT, t4, R
-	srl	SY, 1, SY
-	bne	S, 2b
-
-	br	$q_low_ret
-
-	.align	4
-	cfi_restore_state
-$y_is_neg:
-	/* If we get here, Y is so big that bit 63 is set.  The results
-	   from the divide will be completely wrong.  Fortunately, the
-	   quotient must be either 0 or 1, so the remainder must be X
-	   or X-Y, so just compute it directly.  */
-	cmpule	Y, X, AT
-	subq	X, Y, RV
-	ldt	$f0, 0(sp)
-	cmoveq	AT, X, RV
-
-	lda	sp, FRAME(sp)
-	cfi_restore ($f0)
-	cfi_def_cfa_offset (0)
-	ret	$31, (RA), 1
-
-	.align	4
-	cfi_def_cfa_offset (FRAME)
-$powerof2:
-	subq	Y, 1, AT
-	beq	Y, DIVBYZERO
-	and	X, AT, RV
-	lda	sp, FRAME(sp)
-	cfi_def_cfa_offset (0)
-	ret	$31, (RA), 1
-
-	cfi_endproc
-	.size	__remqu, .-__remqu
-
-	DO_DIVBYZERO