nptl: Extract <bits/atomic_wide_counter.h> from pthread_cond_common.c

And make it an installed header.  This addresses a few aliasing
violations (which do not seem to result in miscompilation due to
the use of atomics), and also enables use of wide counters in other
parts of the library.

The debug output in nptl/tst-cond22 has been adjusted to print
the 32-bit values instead because it avoids a big-endian/little-endian
difference.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>

2 files changed, 129 insertions, 1 deletions

diff --git a/misc/Makefile b/misc/Makefile
index 1083ba3bfc..3b66cb9f6a 100644
--- a/misc/Makefile
+++ b/misc/Makefile
@@ -73,7 +73,8 @@ routines := brk sbrk sstk ioctl \
 	    fgetxattr flistxattr fremovexattr fsetxattr getxattr \
 	    listxattr lgetxattr llistxattr lremovexattr lsetxattr \
 	    removexattr setxattr getauxval ifunc-impl-list makedev \
-	    allocate_once fd_to_filename single_threaded unwind-link
+	    allocate_once fd_to_filename single_threaded unwind-link \
+	    atomic_wide_counter
 
 generated += tst-error1.mtrace tst-error1-mem.out \
   tst-allocate_once.mtrace tst-allocate_once-mem.out
diff --git a/misc/atomic_wide_counter.c b/misc/atomic_wide_counter.c
new file mode 100644
index 0000000000..56d8981925
--- /dev/null
+++ b/misc/atomic_wide_counter.c
@@ -0,0 +1,127 @@
+/* Monotonically increasing wide counters (at least 62 bits).
+   Copyright (C) 2016-2021 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+#include <atomic_wide_counter.h>
+
+#if !__HAVE_64B_ATOMICS
+
+/* Values we add or xor are less than or equal to 1<<31, so we only
+   have to make overflow-and-addition atomic wrt. to concurrent load
+   operations and xor operations.  To do that, we split each counter
+   into two 32b values of which we reserve the MSB of each to
+   represent an overflow from the lower-order half to the higher-order
+   half.
+
+   In the common case, the state is (higher-order / lower-order half, and . is
+   basically concatenation of the bits):
+   0.h     / 0.l  = h.l
+
+   When we add a value of x that overflows (i.e., 0.l + x == 1.L), we run the
+   following steps S1-S4 (the values these represent are on the right-hand
+   side):
+   S1:  0.h     / 1.L == (h+1).L
+   S2:  1.(h+1) / 1.L == (h+1).L
+   S3:  1.(h+1) / 0.L == (h+1).L
+   S4:  0.(h+1) / 0.L == (h+1).L
+   If the LSB of the higher-order half is set, readers will ignore the
+   overflow bit in the lower-order half.
+
+   To get an atomic snapshot in load operations, we exploit that the
+   higher-order half is monotonically increasing; if we load a value V from
+   it, then read the lower-order half, and then read the higher-order half
+   again and see the same value V, we know that both halves have existed in
+   the sequence of values the full counter had.  This is similar to the
+   validated reads in the time-based STMs in GCC's libitm (e.g.,
+   method_ml_wt).
+
+   One benefit of this scheme is that this makes load operations
+   obstruction-free because unlike if we would just lock the counter, readers
+   can almost always interpret a snapshot of each halves.  Readers can be
+   forced to read a new snapshot when the read is concurrent with an overflow.
+   However, overflows will happen infrequently, so load operations are
+   practically lock-free.  */
+
+uint64_t
+__atomic_wide_counter_fetch_add_relaxed (__atomic_wide_counter *c,
+                                         unsigned int op)
+{
+  /* S1. Note that this is an atomic read-modify-write so it extends the
+     release sequence of release MO store at S3.  */
+  unsigned int l = atomic_fetch_add_relaxed (&c->__value32.__low, op);
+  unsigned int h = atomic_load_relaxed (&c->__value32.__high);
+  uint64_t result = ((uint64_t) h << 31) | l;
+  l += op;
+  if ((l >> 31) > 0)
+    {
+      /* Overflow.  Need to increment higher-order half.  Note that all
+         add operations are ordered in happens-before.  */
+      h++;
+      /* S2. Release MO to synchronize with the loads of the higher-order half
+         in the load operation.  See __condvar_load_64_relaxed.  */
+      atomic_store_release (&c->__value32.__high,
+                            h | ((unsigned int) 1 << 31));
+      l ^= (unsigned int) 1 << 31;
+      /* S3.  See __condvar_load_64_relaxed.  */
+      atomic_store_release (&c->__value32.__low, l);
+      /* S4.  Likewise.  */
+      atomic_store_release (&c->__value32.__high, h);
+    }
+  return result;
+}
+
+uint64_t
+__atomic_wide_counter_load_relaxed (__atomic_wide_counter *c)
+{
+  unsigned int h, l, h2;
+  do
+    {
+      /* This load and the second one below to the same location read from the
+         stores in the overflow handling of the add operation or the
+         initializing stores (which is a simple special case because
+         initialization always completely happens before further use).
+         Because no two stores to the higher-order half write the same value,
+         the loop ensures that if we continue to use the snapshot, this load
+         and the second one read from the same store operation.  All candidate
+         store operations have release MO.
+         If we read from S2 in the first load, then we will see the value of
+         S1 on the next load (because we synchronize with S2), or a value
+         later in modification order.  We correctly ignore the lower-half's
+         overflow bit in this case.  If we read from S4, then we will see the
+         value of S3 in the next load (or a later value), which does not have
+         the overflow bit set anymore.
+          */
+      h = atomic_load_acquire (&c->__value32.__high);
+      /* This will read from the release sequence of S3 (i.e, either the S3
+         store or the read-modify-writes at S1 following S3 in modification
+         order).  Thus, the read synchronizes with S3, and the following load
+         of the higher-order half will read from the matching S2 (or a later
+         value).
+         Thus, if we read a lower-half value here that already overflowed and
+         belongs to an increased higher-order half value, we will see the
+         latter and h and h2 will not be equal.  */
+      l = atomic_load_acquire (&c->__value32.__low);
+      /* See above.  */
+      h2 = atomic_load_relaxed (&c->__value32.__high);
+    }
+  while (h != h2);
+  if (((l >> 31) > 0) && ((h >> 31) > 0))
+    l ^= (unsigned int) 1 << 31;
+  return ((uint64_t) (h & ~((unsigned int) 1 << 31)) << 31) + l;
+}
+
+#endif /* !__HAVE_64B_ATOMICS */