(CFLAGS-tst-align.c): Add -mpreferred-stack-boundary=4.

17 files changed, 2854 insertions, 3180 deletions

diff --git a/manual/.cvsignore b/manual/.cvsignore
index 54abbbb5a4..f1254e92d3 100644
--- a/manual/.cvsignore
+++ b/manual/.cvsignore
@@ -9,6 +9,6 @@ glibc-*
 *.cp *.cps *.fn *.fns *.vr *.vrs *.tp *.tps *.ky *.kys *.pg *.pgs
 
 texis top-menu.texi chapters.texi summary.texi stamp-*
-distinfo dir-add.texinfo dir-add.texi
+distinfo dir-add.texinfo
 
 libm-err.texi
diff --git a/manual/Makefile b/manual/Makefile
index c5866eb9de..a29fdd29a3 100644
--- a/manual/Makefile
+++ b/manual/Makefile
@@ -1,4 +1,4 @@
-# Copyright (C) 1992-1999,2000,2001,2002,2003,2004,2006
+# Copyright (C) 1992-1999,2000,2001,2002,2003,2004
 #	Free Software Foundation, Inc.
 # This file is part of the GNU C Library.
 
@@ -80,7 +80,7 @@ libc.dvi libc.pdf libc.info: chapters.texi top-menu.texi dir-add.texi \
 libc.dvi libc.pdf: texinfo.tex
 
 html: libc/index.html
-libc/index.html: chapters.texi top-menu.texi dir-add.texi libm-err.texi
+libc/index.html: chapters.texi top-menu.texi libm-err.texi
 	$(MAKEINFO) --html libc.texinfo
 
 # Generate the summary from the Texinfo source files for each chapter.
@@ -166,7 +166,7 @@ glibc-doc-$(edition).tar: $(doc-only-dist) $(distribute)
 .PHONY: mostlyclean distclean realclean clean
 mostlyclean:
 	-rm -f libc.dvi libc.pdf libc.tmp libc.info*
-	-rm -f $(objpfx)stubs
+	-rm -f $(objpfx)stubs $(objpfx)distinfo
 	-rm -f $(foreach o,$(object-suffixes-for-libc),$(objpfx)stamp$o)
 clean: mostlyclean
 distclean: clean
@@ -220,7 +220,8 @@ subdir_%: ;
 # ../Rules defines them for code subdirectories; for us, they are no-ops.
 # None of these should be `subdir_TARGET'; those targets are transformed
 # by the implicit rule above into `TARGET' deps.
-glibc-targets	:= lib objects objs others tests xtests lint.out echo-headers
+glibc-targets	:= lib objects objs others tests xtests lint.out \
+		   echo-headers echo-distinfo
 .PHONY: $(glibc-targets)
 $(glibc-targets):
 
diff --git a/manual/dir b/manual/dir
index ee98f79f59..f5920b12be 100644
--- a/manual/dir
+++ b/manual/dir
@@ -1,3 +1,4 @@
+$Id$
 This is the file .../info/dir, which contains the topmost node of the
 Info hierarchy.  The first time you invoke Info you start off
 looking at that node, which is (dir)Top.
diff --git a/manual/errno.texi b/manual/errno.texi
index e230506427..c799d268f8 100644
--- a/manual/errno.texi
+++ b/manual/errno.texi
@@ -1229,42 +1229,6 @@ They are not yet documented.}
 @comment errno ???/???
 @end deftypevr
 
-@comment errno.h
-@comment Linux: Required key not available
-@deftypevr Macro int ENOKEY
-@comment errno ???/???
-@end deftypevr
-
-@comment errno.h
-@comment Linux: Key has expired
-@deftypevr Macro int EKEYEXPIRED
-@comment errno ???/???
-@end deftypevr
-
-@comment errno.h
-@comment Linux: Key has been revoked
-@deftypevr Macro int EKEYREVOKED
-@comment errno ???/???
-@end deftypevr
-
-@comment errno.h
-@comment Linux: Key was rejected by service
-@deftypevr Macro int EKEYREJECTED
-@comment errno ???/???
-@end deftypevr
-
-@comment errno.h
-@comment Linux: Owner died
-@deftypevr Macro int EOWNERDEAD
-@comment errno ???/???
-@end deftypevr
-
-@comment errno.h
-@comment Linux: State not recoverable
-@deftypevr Macro int ENOTRECOVERABLE
-@comment errno ???/???
-@end deftypevr
-
 @node Error Messages,  , Error Codes, Error Reporting
 @section Error Messages
 
diff --git a/manual/filesys.texi b/manual/filesys.texi
index 2436f22e88..70889c2f85 100644
--- a/manual/filesys.texi
+++ b/manual/filesys.texi
@@ -196,17 +196,11 @@ files in a directory, perhaps as part of a menu.
 
 @cindex directory stream
 The @code{opendir} function opens a @dfn{directory stream} whose
-elements are directory entries.  Alternatively @code{fdopendir} can be
-used which can have advantages if the program needs to have more
-control over the way the directory is opened for reading.  This
-allows, for instance, to pass the @code{O_NOATIME} flag to
-@code{open}.
-
-You use the @code{readdir} function on the directory stream to
-retrieve these entries, represented as @w{@code{struct dirent}}
-objects.  The name of the file for each entry is stored in the
-@code{d_name} member of this structure.  There are obvious parallels
-here to the stream facilities for ordinary files, described in
+elements are directory entries.  You use the @code{readdir} function on
+the directory stream to retrieve these entries, represented as
+@w{@code{struct dirent}} objects.  The name of the file for each entry is
+stored in the @code{d_name} member of this structure.  There are obvious
+parallels here to the stream facilities for ordinary files, described in
 @ref{I/O on Streams}.
 
 @menu
@@ -355,9 +349,6 @@ The process has too many files open.
 The entire system, or perhaps the file system which contains the
 directory, cannot support any additional open files at the moment.
 (This problem cannot happen on the GNU system.)
-
-@item ENOMEM
-Not enough memory available.
 @end table
 
 The @code{DIR} type is typically implemented using a file descriptor,
@@ -366,48 +357,6 @@ and the @code{opendir} function in terms of the @code{open} function.
 file descriptors are closed on @code{exec} (@pxref{Executing a File}).
 @end deftypefun
 
-The directory which is opened for reading by @code{opendir} is
-identified by the name.  In some situations this is not sufficient.
-Or the way @code{opendir} implicitly creates a file descriptor for the
-directory is not the way a program might want it.  In these cases an
-alternative interface can be used.
-
-@comment dirent.h
-@comment GNU
-@deftypefun {DIR *} fdopendir (int @var{fd})
-The @code{fdopendir} function works just like @code{opendir} but
-instead of taking a file name and opening a file descriptor for the
-directory the caller is required to provide a file descriptor.  This
-file descriptor is then used in subsequent uses of the returned
-directory stream object.
-
-The caller must make sure the file descriptor is associated with a
-directory and it allows reading.
-
-If the @code{fdopendir} call returns successfully the file descriptor
-is now under the control of the system.  It can be used in the same
-way the descriptor implicitly created by @code{opendir} can be used
-but the program must not close the descriptor.
-
-In case the function is unsuccessful it returns a null pointer and the
-file descriptor remains to be usable by the program.  The following
-@code{errno} error conditions are defined for this function:
-
-@table @code
-@item EBADF
-The file descriptor is not valid.
-
-@item ENOTDIR
-The file descriptor is not associated with a directory.
-
-@item EINVAL
-The descriptor does not allow reading the directory content.
-
-@item ENOMEM
-Not enough memory available.
-@end table
-@end deftypefun
-
 In some situations it can be desirable to get hold of the file
 descriptor which is created by the @code{opendir} call.  For instance,
 to switch the current working directory to the directory just read the
@@ -582,7 +531,7 @@ added or removed since you last called @code{opendir} or
 
 @comment dirent.h
 @comment BSD
-@deftypefun long int telldir (DIR *@var{dirstream})
+@deftypefun off_t telldir (DIR *@var{dirstream})
 The @code{telldir} function returns the file position of the directory
 stream @var{dirstream}.  You can use this value with @code{seekdir} to
 restore the directory stream to that position.
@@ -590,7 +539,7 @@ restore the directory stream to that position.
 
 @comment dirent.h
 @comment BSD
-@deftypefun void seekdir (DIR *@var{dirstream}, long int @var{pos})
+@deftypefun void seekdir (DIR *@var{dirstream}, off_t @var{pos})
 The @code{seekdir} function sets the file position of the directory
 stream @var{dirstream} to @var{pos}.  The value @var{pos} must be the
 result of a previous call to @code{telldir} on this particular stream;
@@ -1250,10 +1199,10 @@ result is passed back as the return value of the function in a block of
 memory allocated with @code{malloc}.  If the result is not used anymore
 the memory should be freed with a call to @code{free}.
 
-If any of the path components is missing the function returns a NULL
-pointer.  This is also what is returned if the length of the path
-reaches or exceeds @code{PATH_MAX} characters.  In any case
-@code{errno} is set accordingly.
+In any of the path components except the last one is missing the
+function returns a NULL pointer.  This is also what is returned if the
+length of the path reaches or exceeds @code{PATH_MAX} characters.  In
+any case @code{errno} is set accordingly.
 
 @table @code
 @item ENAMETOOLONG
@@ -1791,7 +1740,7 @@ is transparently replaced by @code{ino64_t}.
 @deftp {Data Type} ino64_t
 This is an arithmetic data type used to represent file serial numbers
 for the use in LFS.  In the GNU system, this type is equivalent to
-@code{unsigned long long int}.
+@code{unsigned long longint}.
 
 When compiling with @code{_FILE_OFFSET_BITS == 64} this type is
 available under the name @code{ino_t}.
@@ -2806,7 +2755,7 @@ function.
 
 @comment sys/time.h
 @comment BSD
-@deftypefun int futimes (int @var{fd}, struct timeval @var{tvp}@t{[2]})
+@deftypefun int futimes (int *@var{fd}, struct timeval @var{tvp}@t{[2]})
 This function is like @code{utimes}, except that it takes an open file
 descriptor as an argument instead of a file name.  @xref{Low-Level
 I/O}.  This function comes from FreeBSD, and is not available on all
diff --git a/manual/install.texi b/manual/install.texi
index 0cd4d622de..2907715abc 100644
--- a/manual/install.texi
+++ b/manual/install.texi
@@ -14,7 +14,15 @@ installation.  It is updated more frequently than this manual.
 Features can be added to GNU Libc via @dfn{add-on} bundles.  These are
 separate tar files, which you unpack into the top level of the source
 tree.  Then you give @code{configure} the @samp{--enable-add-ons} option
-to activate them, and they will be compiled into the library.
+to activate them, and they will be compiled into the library.  As of the
+2.2 release, one important component of glibc is distributed as
+``official'' add-ons: the linuxthreads add-on.  Unless you are doing an
+unusual installation, you should get this.
+
+Support for POSIX threads is maintained by someone else, so it's in a
+separate package.  It is only available for GNU/Linux systems, but this will
+change in the future.  Get it from the same place you got the main
+bundle; the file is @file{glibc-linuxthreads-@var{VERSION}.tar.gz}.
 
 You will need recent versions of several GNU tools: definitely GCC and
 GNU Make, and possibly others.  @xref{Tools for Compilation}, below.
@@ -24,6 +32,7 @@ GNU Make, and possibly others.  @xref{Tools for Compilation}, below.
 * Running make install::        How to install it once you've got it
  compiled.
 * Tools for Compilation::       You'll need these first.
+* Supported Configurations::    What it runs on, what it doesn't.
 * Linux::                       Specific advice for GNU/Linux systems.
 * Reporting Bugs::              So they'll get fixed.
 @end menu
@@ -33,31 +42,34 @@ GNU Make, and possibly others.  @xref{Tools for Compilation}, below.
 @cindex configuring
 @cindex compiling
 
-GNU libc cannot be compiled in the source directory.  You must build
-it in a separate build directory.  For example, if you have unpacked
-the glibc sources in @file{/src/gnu/glibc-2.4}, create a directory
+GNU libc can be compiled in the source directory, but we strongly advise
+building it in a separate build directory.  For example, if you have
+ unpacked
+the glibc sources in @file{/src/gnu/glibc-2.3}, create a directory
 @file{/src/gnu/glibc-build} to put the object files in.  This allows
-removing the whole build directory in case an error occurs, which is
-the safest way to get a fresh start and should always be done.
+removing the whole build directory in case an error occurs, which is the
+safest way to get a fresh start and should always be done.
 
 From your object directory, run the shell script @file{configure} located
 at the top level of the source tree.  In the scenario above, you'd type
 
 @smallexample
-$ ../glibc-2.4/configure @var{args@dots{}}
+$ ../glibc-2.3/configure @var{args@dots{}}
 @end smallexample
 
-Please note that even though you're building in a separate build
-directory, the compilation needs to modify a few files in the source
+Please note that even if you're building in a separate build directory,
+the compilation needs to modify a few files in the source
 directory, especially some files in the manual subdirectory.
 
 @noindent
-@code{configure} takes many options, but the only one that is usually
-mandatory is @samp{--prefix}.  This option tells @code{configure}
-where you want glibc installed.  This defaults to @file{/usr/local},
-but the normal setting to install as the standard system library is
-@samp{--prefix=/usr} for GNU/Linux systems and @samp{--prefix=} (an
-empty prefix) for GNU/Hurd systems.
+@code{configure} takes many options, but you can get away with knowing
+only two: @samp{--prefix} and @samp{--enable-add-ons}.  The
+@code{--prefix} option tells @code{configure} where you want glibc
+installed. This defaults to @file{/usr/local}.  The
+@samp{--enable-add-ons} option tells @code{configure} to use all the
+add-on bundles it finds in the source directory.  Since important
+functionality is provided in add-ons, you should always specify this
+option.
 
 It may also be useful to set the @var{CC} and @var{CFLAGS} variables in
 the environment when running @code{configure}.  @var{CC} selects the C
@@ -91,15 +103,11 @@ compile glibc with a newer set of kernel headers than the ones found in
 @file{/usr/include}.
 
 @item --enable-add-ons[=@var{list}]
-Specify add-on packages to include in the build.  If this option is
-specified with no list, it enables all the add-on packages it finds in
-the main source directory; this is the default behavior.  You may
-specify an explicit list of add-ons to use in @var{list}, separated by
-spaces or commas (if you use spaces, remember to quote them from the
-shell).  Each add-on in @var{list} can be an absolute directory name
-or can be a directory name relative to the main source directory, or
-relative to the build directory (that is, the current working directory).
-For example, @samp{--enable-add-ons=nptl,../glibc-libidn-2.4}.
+Enable add-on packages in your source tree.  If this option is specified
+with no list, it enables all the add-on packages it finds.  If you do
+not wish to use some add-on packages that you have present in your source
+tree, give this option a list of the add-ons that you @emph{do} want
+used, like this: @samp{--enable-add-ons=linuxthreads}
 
 @item --enable-kernel=@var{version}
 This option is currently only useful on GNU/Linux systems.  The
@@ -186,10 +194,11 @@ produce a lot of output, some of which may look like errors from
 @code{make} but isn't.  Look for error messages from @code{make}
 containing @samp{***}.  Those indicate that something is seriously wrong.
 
-The compilation process can take a long time, depending on the
-configuration and the speed of your machine.  Some complex modules may
-take a very long time to compile, as much as several minutes on slower
-machines.  Do not panic if the compiler appears to hang.
+The compilation process can take several hours.  Expect at least two
+hours for the default configuration on i586 for GNU/Linux.  For Hurd,
+times are much longer.  Some complex modules may take a very long time
+to compile, as much as several minutes on slower machines.  Do not
+panic if the compiler appears to hang.
 
 If you want to run a parallel make, simply pass the @samp{-j} option
 with an appropriate numeric parameter to @code{make}.  You need a recent
@@ -328,18 +337,11 @@ recommend GNU @code{make} version 3.79.  All earlier versions have severe
 bugs or lack features.
 
 @item
-GCC 3.4 or newer, GCC 4.1 recommended
+GCC 3.2 or newer
 
 The GNU C library can only be compiled with the GNU C compiler family.
-For the 2.3 releases, GCC 3.2 or higher is required; GCC 3.4 is the
-compiler we advise to use for 2.3 versions.
-For the 2.4 release, GCC 3.4 or higher is required; as of this
-writing, GCC 4.1 is the compiler we advise to use for current versions.
-On certain machines including @code{powerpc64}, compilers prior to GCC
-4.0 have bugs that prevent them compiling the C library code in the
-2.4 release.  On other machines, GCC 4.1 is required to build the C
-library with support for the correct @code{long double} type format;
-these include @code{powerpc} (32 bit), @code{s390} and @code{s390x}.
+As of the 2.3 release, GCC 3.2 or higher is required.  As of this
+writing, GCC 3.2 is the compiler we advise to use.
 
 You can use whatever compiler you like to compile programs that use GNU
 libc, but be aware that both GCC 2.7 and 2.8 have bugs in their
@@ -348,7 +350,7 @@ floating-point support that may be triggered by the math library.
 Check the FAQ for any special compiler issues on particular platforms.
 
 @item
-GNU @code{binutils} 2.15 or later
+GNU @code{binutils} 2.13 or later
 
 You must use GNU @code{binutils} (as and ld) to build the GNU C library.
 No other assembler or linker has the necessary functionality at the
@@ -363,10 +365,11 @@ understand all the tags used in the document, and the installation
 mechanism for the info files is not present or works differently.
 
 @item
-GNU @code{awk} 3.0, or higher
+GNU @code{awk} 3.0, or some other POSIX awk
 
-@code{Awk} is used in several places to generate files.
-@code{gawk} 3.0 is known to work.
+@code{Awk} is used in several places to generate files.  The scripts
+should work with any POSIX-compliant @code{awk} implementation;
+@code{gawk} 3.0 and @code{mawk} 1.3 are known to work.
 
 @item
 Perl 5
@@ -406,6 +409,86 @@ GNU @code{gettext} 0.10.36 or later
 You may also need these packages if you upgrade your source tree using
 patches, although we try to avoid this.
 
+@node Supported Configurations
+@appendixsec Supported Configurations
+@cindex configurations, all supported
+
+The GNU C Library currently supports configurations that match the
+following patterns:
+
+@smallexample
+alpha@var{*}-@var{*}-linux
+arm-@var{*}-linux
+cris-@var{*}-linux
+hppa-@var{*}-linux
+i@var{x}86-@var{*}-gnu
+i@var{x}86-@var{*}-linux
+ia64-@var{*}-linux
+m68k-@var{*}-linux
+mips@var{*}-@var{*}-linux
+powerpc-@var{*}-linux
+s390-@var{*}-linux
+s390x-@var{*}-linux
+sparc-@var{*}-linux
+sparc64-@var{*}-linux
+x86_64-@var{*}-linux
+@end smallexample
+
+Former releases of this library (version 2.1 and/or 2.0) used to run on
+the following configurations:
+
+@smallexample
+arm-@var{*}-linuxaout
+arm-@var{*}-none
+@end smallexample
+
+Very early releases (version 1.09.1 and perhaps earlier versions) used
+to run on the following configurations:
+
+@smallexample
+alpha-dec-osf1
+alpha-@var{*}-linuxecoff
+i@var{x}86-@var{*}-bsd4.3
+i@var{x}86-@var{*}-isc2.2
+i@var{x}86-@var{*}-isc3.@var{n}
+i@var{x}86-@var{*}-sco3.2
+i@var{x}86-@var{*}-sco3.2v4
+i@var{x}86-@var{*}-sysv
+i@var{x}86-@var{*}-sysv4
+i@var{x}86-force_cpu386-none
+i@var{x}86-sequent-bsd
+i960-nindy960-none
+m68k-hp-bsd4.3
+m68k-mvme135-none
+m68k-mvme136-none
+m68k-sony-newsos3
+m68k-sony-newsos4
+m68k-sun-sunos4.@var{n}
+mips-dec-ultrix4.@var{n}
+mips-sgi-irix4.@var{n}
+sparc-sun-solaris2.@var{n}
+sparc-sun-sunos4.@var{n}
+@end smallexample
+
+Since no one has volunteered to test and fix these configurations,
+they are not supported at the moment.  They probably don't compile;
+they definitely don't work anymore.  Porting the library is not hard.
+If you are interested in doing a port, please contact the glibc
+maintainers.  Start at @url{http://www.gnu.org/software/libc/} and
+read the references there on how to go about getting involved and
+contacting the developers.
+
+Valid cases of @samp{i@var{x}86} include @samp{i386}, @samp{i486},
+@samp{i586}, and @samp{i686}.  All of those configurations produce a
+library that can run on this processor and newer processors.  The GCC
+compiler by default generates code that's optimized for the machine it's
+configured for and will use the instructions available on that machine.
+For example if your GCC is configured for @samp{i686}, gcc will optimize
+for @samp{i686} and might issue some @samp{i686} specific instructions.
+To generate code for other models, you have to configure for that model
+and give GCC the appropriate @samp{-march=} and @samp{-mcpu=} compiler
+switches via @var{CFLAGS}.
+
 @node Linux
 @appendixsec Specific advice for GNU/Linux systems
 @cindex upgrading from libc5
diff --git a/manual/llio.texi b/manual/llio.texi
index 1d088d8ee2..4ac6c5fa4f 100644
--- a/manual/llio.texi
+++ b/manual/llio.texi
@@ -368,11 +368,6 @@ sending it a @code{SIGTTIN} signal isn't working.  This might happen if
 the signal is being blocked or ignored, or because the process group is
 orphaned.  @xref{Job Control}, for more information about job control,
 and @ref{Signal Handling}, for information about signals.
-
-@item EINVAL
-In some systems, when reading from a character or block device, position
-and size offsets must be aligned to a particular block size.  This error
-indicates that the offsets were not properly aligned.
 @end table
 
 Please note that there is no function named @code{read64}.  This is not
@@ -520,11 +515,6 @@ The device containing the file is full.
 This error is returned when you try to write to a pipe or FIFO that
 isn't open for reading by any process.  When this happens, a @code{SIGPIPE}
 signal is also sent to the process; see @ref{Signal Handling}.
-
-@item EINVAL
-In some systems, when writing to a character or block device, position
-and size offsets must be aligned to a particular block size.  This error
-indicates that the offsets were not properly aligned.
 @end table
 
 Unless you have arranged to prevent @code{EINTR} failures, you should
@@ -1592,13 +1582,11 @@ descriptors are checked to see if they are ready for writing; and the
 conditions.  You can pass a null pointer for any of these arguments if
 you are not interested in checking for that kind of condition.
 
-A file descriptor is considered ready for reading if a @code{read}
-call will not block.  This usually includes the read offset being at
-the end of the file or there is an error to report.  A server socket
-is considered ready for reading if there is a pending connection which
-can be accepted with @code{accept}; @pxref{Accepting Connections}.  A
-client socket is ready for writing when its connection is fully
-established; @pxref{Connecting}.
+A file descriptor is considered ready for reading if it is not at end of
+file.  A server socket is considered ready for reading if there is a
+pending connection which can be accepted with @code{accept};
+@pxref{Accepting Connections}.  A client socket is ready for writing when
+its connection is fully established; @pxref{Connecting}.
 
 ``Exceptional conditions'' does not mean errors---errors are reported
 immediately when an erroneous system call is executed, and do not
diff --git a/manual/maint.texi b/manual/maint.texi
index 2b9221233a..3d8d24f16a 100644
--- a/manual/maint.texi
+++ b/manual/maint.texi
@@ -232,6 +232,16 @@ of @file{sysdeps} implements.  For example,
 directory contains various network-oriented operations which only make
 sense to put in the library on systems that support the Internet.@refill
 
+@item Dist
+
+This file contains the names of files (relative to the subdirectory of
+@file{sysdeps} in which it appears) which should be included in the
+distribution.  List any new files used by rules in the @file{Makefile}
+in the same directory, or header files used by the source files in that
+directory.  You don't need to list files that are implementations
+(either C or assembly source) of routines whose names are given in the
+machine-independent makefiles in the main source tree.
+
 @item configure
 
 This file is a shell script fragment to be run at configuration time.
diff --git a/manual/memory.texi b/manual/memory.texi
index 91b9d84eb2..91abb7f5d4 100644
--- a/manual/memory.texi
+++ b/manual/memory.texi
@@ -948,7 +948,7 @@ program.
 #include <malloc.h>
 
 /* Prototypes for our hooks.  */
-static void my_init_hook (void);
+static void *my_init_hook (void);
 static void *my_malloc_hook (size_t, const void *);
 static void my_free_hook (void*, const void *);
 
@@ -984,7 +984,7 @@ my_malloc_hook (size_t size, const void *caller)
   return result;
 @}
 
-static void
+static void *
 my_free_hook (void *ptr, const void *caller)
 @{
   /* Restore all old hooks */
@@ -1968,8 +1968,7 @@ obstack_next_free (@var{obstack-ptr}) - obstack_base (@var{obstack-ptr})
 
 Each obstack has an @dfn{alignment boundary}; each object allocated in
 the obstack automatically starts on an address that is a multiple of the
-specified boundary.  By default, this boundary is aligned so that
-the object can hold any type of data.
+specified boundary.  By default, this boundary is 4 bytes.
 
 To access an obstack's alignment boundary, use the macro
 @code{obstack_alignment_mask}, whose function prototype looks like
@@ -1981,9 +1980,7 @@ this:
 The value is a bit mask; a bit that is 1 indicates that the corresponding
 bit in the address of an object should be 0.  The mask value should be one
 less than a power of 2; the effect is that all object addresses are
-multiples of that power of 2.  The default value of the mask is a value
-that allows aligned objects to hold any type of data: for example, if
-its value is 3, any type of data can be stored at locations whose
+multiples of that power of 2.  The default value of the mask is 3, so that
 addresses are multiples of 4.  A mask value of 0 means an object can start
 on any multiple of 1 (that is, no alignment is required).
 
@@ -2387,7 +2384,7 @@ exceed the process' data storage limit.
 
 @comment unistd.h
 @comment BSD
-@deftypefun void *sbrk (ptrdiff_t @var{delta})
+@deftypefun int sbrk (ptrdiff_t @var{delta})
 This function is the same as @code{brk} except that you specify the new
 end of the data segment as an offset @var{delta} from the current end
 and on success the return value is the address of the resulting end of
diff --git a/manual/message.texi b/manual/message.texi
index 1507a6d04a..eab98e9338 100644
--- a/manual/message.texi
+++ b/manual/message.texi
@@ -1189,7 +1189,7 @@ the rules of how to select the plural form.  Since the formula varies
 with every language this is the only viable solution except for
 hardcoding the information in the code (which still would require the
 possibility of extensions to not prevent the use of new languages).  The
-details are explained in the GNU @code{gettext} manual.  Here only a
+details are explained in the GNU @code{gettext} manual.  Here only a a
 bit of information is provided.
 
 The information about the plural form selection has to be stored in the
@@ -1590,7 +1590,7 @@ the user to select the message s/he wants to see.  S/He must understand
 them.
 
 The POSIX locale model uses the environment variables @code{LC_COLLATE},
-@code{LC_CTYPE}, @code{LC_MESSAGES}, @code{LC_MONETARY}, @code{LC_NUMERIC},
+@code{LC_CTYPE}, @code{LC_MESSAGES}, @code{LC_MONETARY}, @code{NUMERIC},
 and @code{LC_TIME} to select the locale which is to be used.  This way
 the user can influence lots of functions.  As we mentioned above the
 @code{gettext} functions also take advantage of this.
diff --git a/manual/pattern.texi b/manual/pattern.texi
index c2a42cd843..872fde05fb 100644
--- a/manual/pattern.texi
+++ b/manual/pattern.texi
@@ -721,7 +721,7 @@ expression into it by calling @code{regcomp}.
 
 @comment regex.h
 @comment POSIX.2
-@deftypefun int regcomp (regex_t *restrict @var{compiled}, const char *restrict @var{pattern}, int @var{cflags})
+@deftypefun int regcomp (regex_t *@var{compiled}, const char *@var{pattern}, int @var{cflags})
 The function @code{regcomp} ``compiles'' a regular expression into a
 data structure that you can use with @code{regexec} to match against a
 string.  The compiled regular expression format is designed for
@@ -870,7 +870,7 @@ unless the regular expression contains anchor characters (@samp{^} or
 
 @comment regex.h
 @comment POSIX.2
-@deftypefun int regexec (const regex_t *restrict @var{compiled}, const char *restrict @var{string}, size_t @var{nmatch}, regmatch_t @var{matchptr}[restrict], int @var{eflags})
+@deftypefun int regexec (regex_t *@var{compiled}, char *@var{string}, size_t @var{nmatch}, regmatch_t @var{matchptr} @t{[]}, int @var{eflags})
 This function tries to match the compiled regular expression
 @code{*@var{compiled}} against @var{string}.
 
@@ -1049,7 +1049,7 @@ the function @code{regerror} to turn it into an error message string.
 
 @comment regex.h
 @comment POSIX.2
-@deftypefun size_t regerror (int @var{errcode}, const regex_t *restrict @var{compiled}, char *restrict @var{buffer}, size_t @var{length})
+@deftypefun size_t regerror (int @var{errcode}, regex_t *@var{compiled}, char *@var{buffer}, size_t @var{length})
 This function produces an error message string for the error code
 @var{errcode}, and stores the string in @var{length} bytes of memory
 starting at @var{buffer}.  For the @var{compiled} argument, supply the
diff --git a/manual/signal.texi b/manual/signal.texi
index cbf746639a..1d28f74027 100644
--- a/manual/signal.texi
+++ b/manual/signal.texi
@@ -2029,8 +2029,8 @@ This is an integer data type.  Objects of this type are always accessed
 atomically.
 @end deftp
 
-In practice, you can assume that @code{int} is atomic.
-You can also assume that pointer
+In practice, you can assume that @code{int} and other integer types no
+longer than @code{int} are atomic.  You can also assume that pointer
 types are atomic; that is very convenient.  Both of these assumptions
 are true on all of the machines that the GNU C library supports and on
 all POSIX systems we know of.
diff --git a/manual/stdio.texi b/manual/stdio.texi
index 977989d95e..39fd4fb123 100644
--- a/manual/stdio.texi
+++ b/manual/stdio.texi
@@ -2357,8 +2357,7 @@ make_message (char *name, char *value)
     @{
       /* @r{Reallocate buffer now that we know
          how much space is needed.} */
-      size = nchars + 1;
-      buffer = (char *) xrealloc (buffer, size);
+      buffer = (char *) xrealloc (buffer, nchars + 1);
 
       if (buffer != NULL)
         /* @r{Try again.} */
@@ -2393,9 +2392,8 @@ This function is similar to @code{sprintf}, except that it dynamically
 allocates a string (as with @code{malloc}; @pxref{Unconstrained
 Allocation}) to hold the output, instead of putting the output in a
 buffer you allocate in advance.  The @var{ptr} argument should be the
-address of a @code{char *} object, and a successful call to
-@code{asprintf} stores a pointer to the newly allocated string at that
-location.
+address of a @code{char *} object, and @code{asprintf} stores a pointer
+to the newly allocated string at that location.
 
 The return value is the number of characters allocated for the buffer, or
 less than zero if an error occurred. Usually this means that the buffer
@@ -4854,9 +4852,8 @@ Got r
 @comment GNU
 @deftypefun {FILE *} open_memstream (char **@var{ptr}, size_t *@var{sizeloc})
 This function opens a stream for writing to a buffer.  The buffer is
-allocated dynamically and grown as necessary, using @code{malloc}.
-After you've closed the stream, this buffer is your responsibility to
-clean up using @code{free} or @code{realloc}.  @xref{Unconstrained Allocation}.
+allocated dynamically (as with @code{malloc}; @pxref{Unconstrained
+Allocation}) and grown as necessary.
 
 When the stream is closed with @code{fclose} or flushed with
 @code{fflush}, the locations @var{ptr} and @var{sizeloc} are updated to
@@ -5070,11 +5067,14 @@ You should define the function to perform seek operations on the cookie
 as:
 
 @smallexample
-int @var{seeker} (void *@var{cookie}, off64_t *@var{position}, int @var{whence})
+int @var{seeker} (void *@var{cookie}, fpos_t *@var{position}, int @var{whence})
 @end smallexample
 
 For this function, the @var{position} and @var{whence} arguments are
-interpreted as for @code{fgetpos}; see @ref{Portable Positioning}.
+interpreted as for @code{fgetpos}; see @ref{Portable Positioning}.  In
+the GNU library, @code{fpos_t} is equivalent to @code{off_t} or
+@code{long int}, and simply represents the number of bytes from the
+beginning of the file.
 
 After doing the seek operation, your function should store the resulting
 file position relative to the beginning of the file in @var{position}.
diff --git a/manual/string.texi b/manual/string.texi
index f582bad96d..21ab71461a 100644
--- a/manual/string.texi
+++ b/manual/string.texi
@@ -386,7 +386,7 @@ memcpy (new, old, arraysize * sizeof (struct foo));
 
 @comment wchar.h
 @comment ISO
-@deftypefun {wchar_t *} wmemcpy (wchar_t *restrict @var{wto}, const wchar_t *restrict @var{wfrom}, size_t @var{size})
+@deftypefun {wchar_t *} wmemcpy (wchar_t *restrict @var{wto}, const wchar_t *restruct @var{wfrom}, size_t @var{size})
 The @code{wmemcpy} function copies @var{size} wide characters from the object
 beginning at @var{wfrom} into the object beginning at @var{wto}.  The
 behavior of this function is undefined if the two arrays @var{wto} and
@@ -1781,9 +1781,9 @@ uppercase and lowercase characters are related.
 
 For example,
 @smallexample
-strcasestr ("hello, world", "L")
+strstr ("hello, world", "L")
     @result{} "llo, world"
-strcasestr ("hello, World", "wo")
+strstr ("hello, World", "wo")
     @result{} "World"
 @end smallexample
 @end deftypefun
@@ -2534,7 +2534,7 @@ The @code{argz_append} function appends @var{buf_len} bytes starting at
 
 @comment argz.h
 @comment GNU
-@deftypefun {void} argz_delete (char **@var{argz}, size_t *@var{argz_len}, char *@var{entry})
+@deftypefun {error_t} argz_delete (char **@var{argz}, size_t *@var{argz_len}, char *@var{entry})
 If @var{entry} points to the beginning of one of the elements in the
 argz vector @code{*@var{argz}}, the @code{argz_delete} function will
 remove this entry and reallocate @code{*@var{argz}}, modifying
diff --git a/manual/texinfo.tex b/manual/texinfo.tex
index c93912a055..e9293f3b9d 100644
--- a/manual/texinfo.tex
+++ b/manual/texinfo.tex
@@ -3,11 +3,10 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2004-11-25.16}
+\def\texinfoversion{2003-05-04.08}
 %
 % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
-% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
-% Foundation, Inc.
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
 %
 % This texinfo.tex file is free software; you can redistribute it and/or
 % modify it under the terms of the GNU General Public License as
@@ -24,16 +23,21 @@
 % to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
 % Boston, MA 02111-1307, USA.
 %
-% As a special exception, when this file is read by TeX when processing
-% a Texinfo source document, you may use the result without
-% restriction.  (This has been our intent since Texinfo was invented.)
+% In other words, you are welcome to use, share and improve this program.
+% You are forbidden to forbid anyone else to use, share and improve
+% what you give them.   Help stamp out software-hoarding!
 %
 % Please try the latest version of texinfo.tex before submitting bug
 % reports; you can get the latest version from:
-%   http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
+%   ftp://ftp.gnu.org/gnu/texinfo/texinfo.tex
+%     (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
 %   ftp://tug.org/tex/texinfo.tex
-%     (and all CTAN mirrors, see http://www.ctan.org).
-% The texinfo.tex in any given distribution could well be out
+%     (and all CTAN mirrors, see http://www.ctan.org),
+%   and /home/gd/gnu/doc/texinfo.tex on the GNU machines.
+%
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+%
+% The texinfo.tex in any given Texinfo distribution could well be out
 % of date, so if that's what you're using, please check.
 %
 % Send bug reports to bug-texinfo@gnu.org.  Please include including a
@@ -55,9 +59,6 @@
 % It is possible to adapt texinfo.tex for other languages, to some
 % extent.  You can get the existing language-specific files from the
 % full Texinfo distribution.
-%
-% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
-
 
 \message{Loading texinfo [version \texinfoversion]:}
 
@@ -84,16 +85,12 @@
 \let\ptexend=\end
 \let\ptexequiv=\equiv
 \let\ptexexclam=\!
-\let\ptexfootnote=\footnote
 \let\ptexgtr=>
 \let\ptexhat=^
 \let\ptexi=\i
 \let\ptexindent=\indent
-\let\ptexinsert=\insert
 \let\ptexlbrace=\{
 \let\ptexless=<
-\let\ptexnewwrite\newwrite
-\let\ptexnoindent=\noindent
 \let\ptexplus=+
 \let\ptexrbrace=\}
 \let\ptexslash=\/
@@ -104,15 +101,6 @@
 % starts a new line in the output.
 \newlinechar = `^^J
 
-% Use TeX 3.0's \inputlineno to get the line number, for better error
-% messages, but if we're using an old version of TeX, don't do anything.
-%
-\ifx\inputlineno\thisisundefined
-  \let\linenumber = \empty % Pre-3.0.
-\else
-  \def\linenumber{l.\the\inputlineno:\space}
-\fi
-
 % Set up fixed words for English if not already set.
 \ifx\putwordAppendix\undefined  \gdef\putwordAppendix{Appendix}\fi
 \ifx\putwordChapter\undefined   \gdef\putwordChapter{Chapter}\fi
@@ -151,81 +139,43 @@
 \ifx\putwordDefspec\undefined   \gdef\putwordDefspec{Special Form}\fi
 \ifx\putwordDefvar\undefined    \gdef\putwordDefvar{Variable}\fi
 \ifx\putwordDefopt\undefined    \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
 \ifx\putwordDeffunc\undefined   \gdef\putwordDeffunc{Function}\fi
+\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
 
 % In some macros, we cannot use the `\? notation---the left quote is
 % in some cases the escape char.
 \chardef\colonChar = `\:
 \chardef\commaChar = `\,
 \chardef\dotChar   = `\.
+\chardef\equalChar = `\=
 \chardef\exclamChar= `\!
 \chardef\questChar = `\?
 \chardef\semiChar  = `\;
-\chardef\underChar = `\_
-
 \chardef\spaceChar = `\ %
-\chardef\spacecat = 10
-\def\spaceisspace{\catcode\spaceChar=\spacecat}
+\chardef\underChar = `\_
 
 % Ignore a token.
 %
 \def\gobble#1{}
 
-% The following is used inside several \edef's.
-\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
+% True if #1 is the empty string, i.e., called like `\ifempty{}'.
+%
+\def\ifempty#1{\ifemptyx #1\emptymarkA\emptymarkB}%
+\def\ifemptyx#1#2\emptymarkB{\ifx #1\emptymarkA}%
 
 % Hyphenation fixes.
-\hyphenation{
-  Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
-  ap-pen-dix bit-map bit-maps
-  data-base data-bases eshell fall-ing half-way long-est man-u-script
-  man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
-  par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
-  spell-ing spell-ings
-  stand-alone strong-est time-stamp time-stamps which-ever white-space
-  wide-spread wrap-around
-}
+\hyphenation{ap-pen-dix}
+\hyphenation{eshell}
+\hyphenation{mini-buf-fer mini-buf-fers}
+\hyphenation{time-stamp}
+\hyphenation{white-space}
 
 % Margin to add to right of even pages, to left of odd pages.
 \newdimen\bindingoffset
 \newdimen\normaloffset
 \newdimen\pagewidth \newdimen\pageheight
 
-% For a final copy, take out the rectangles
-% that mark overfull boxes (in case you have decided
-% that the text looks ok even though it passes the margin).
-%
-\def\finalout{\overfullrule=0pt}
-
-% @| inserts a changebar to the left of the current line.  It should
-% surround any changed text.  This approach does *not* work if the
-% change spans more than two lines of output.  To handle that, we would
-% have adopt a much more difficult approach (putting marks into the main
-% vertical list for the beginning and end of each change).
-%
-\def\|{%
-  % \vadjust can only be used in horizontal mode.
-  \leavevmode
-  %
-  % Append this vertical mode material after the current line in the output.
-  \vadjust{%
-    % We want to insert a rule with the height and depth of the current
-    % leading; that is exactly what \strutbox is supposed to record.
-    \vskip-\baselineskip
-    %
-    % \vadjust-items are inserted at the left edge of the type.  So
-    % the \llap here moves out into the left-hand margin.
-    \llap{%
-      %
-      % For a thicker or thinner bar, change the `1pt'.
-      \vrule height\baselineskip width1pt
-      %
-      % This is the space between the bar and the text.
-      \hskip 12pt
-    }%
-  }%
-}
-
 % Sometimes it is convenient to have everything in the transcript file
 % and nothing on the terminal.  We don't just call \tracingall here,
 % since that produces some useless output on the terminal.  We also make
@@ -250,7 +200,7 @@
     \tracingassigns1
   \fi
   \tracingcommands3  % 3 gives us more in etex
-  \errorcontextlines16
+  \errorcontextlines\maxdimen
 }%
 
 % add check for \lastpenalty to plain's definitions.  If the last thing
@@ -308,7 +258,7 @@
                    % the page break happens to be in the middle of an example.
     \shipout\vbox{%
       % Do this early so pdf references go to the beginning of the page.
-      \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
+      \ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi
       %
       \ifcropmarks \vbox to \outervsize\bgroup
         \hsize = \outerhsize
@@ -389,162 +339,132 @@
 % the input line (except we remove a trailing comment).  #1 should be a
 % macro which expects an ordinary undelimited TeX argument.
 %
-\def\parsearg{\parseargusing{}}
-\def\parseargusing#1#2{%
-  \def\next{#2}%
+\def\parsearg#1{%
+  \let\next = #1%
   \begingroup
     \obeylines
-    \spaceisspace
-    #1%
-    \parseargline\empty% Insert the \empty token, see \finishparsearg below.
+    \futurelet\temp\parseargx
+}
+
+% If the next token is an obeyed space (from an @example environment or
+% the like), remove it and recurse.  Otherwise, we're done.
+\def\parseargx{%
+  % \obeyedspace is defined far below, after the definition of \sepspaces.
+  \ifx\obeyedspace\temp
+    \expandafter\parseargdiscardspace
+  \else
+    \expandafter\parseargline
+  \fi
 }
 
+% Remove a single space (as the delimiter token to the macro call).
+{\obeyspaces %
+ \gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
+
 {\obeylines %
   \gdef\parseargline#1^^M{%
     \endgroup % End of the group started in \parsearg.
-    \argremovecomment #1\comment\ArgTerm%
+    %
+    % First remove any @c comment, then any @comment.
+    % Result of each macro is put in \toks0.
+    \argremovec #1\c\relax %
+    \expandafter\argremovecomment \the\toks0 \comment\relax %
+    %
+    % Call the caller's macro, saved as \next in \parsearg.
+    \expandafter\next\expandafter{\the\toks0}%
   }%
 }
 
-% First remove any @comment, then any @c comment.
-\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
-\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
+% Since all \c{,omment} does is throw away the argument, we can let TeX
+% do that for us.  The \relax here is matched by the \relax in the call
+% in \parseargline; it could be more or less anything, its purpose is
+% just to delimit the argument to the \c.
+\def\argremovec#1\c#2\relax{\toks0 = {#1}}
+\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
 
-% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space.
-%
-% \argremovec might leave us with trailing space, e.g.,
+% \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
 %    @end itemize  @c foo
-% This space token undergoes the same procedure and is eventually removed
-% by \finishparsearg.
-%
-\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
-\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
-\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
-  \def\temp{#3}%
-  \ifx\temp\empty
-    % We cannot use \next here, as it holds the macro to run;
-    % thus we reuse \temp.
-    \let\temp\finishparsearg
-  \else
-    \let\temp\argcheckspaces
-  \fi
-  % Put the space token in:
-  \temp#1 #3\ArgTerm
+% will have two active spaces as part of the argument with the
+% `itemize'.  Here we remove all active spaces from #1, and assign the
+% result to \toks0.
+%
+% This loses if there are any *other* active characters besides spaces
+% in the argument -- _ ^ +, for example -- since they get expanded.
+% Fortunately, Texinfo does not define any such commands.  (If it ever
+% does, the catcode of the characters in questionwill have to be changed
+% here.)  But this means we cannot call \removeactivespaces as part of
+% \argremovec{,omment}, since @c uses \parsearg, and thus the argument
+% that \parsearg gets might well have any character at all in it.
+%
+\def\removeactivespaces#1{%
+  \begingroup
+    \ignoreactivespaces
+    \edef\temp{#1}%
+    \global\toks0 = \expandafter{\temp}%
+  \endgroup
 }
 
-% If a _delimited_ argument is enclosed in braces, they get stripped; so
-% to get _exactly_ the rest of the line, we had to prevent such situation.
-% We prepended an \empty token at the very beginning and we expand it now,
-% just before passing the control to \next.
-% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
-% either the null string, or it ends with \^^M---thus there is no danger
-% that a pair of braces would be stripped.
+% Change the active space to expand to nothing.
 %
-% But first, we have to remove the trailing space token.
-%
-\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}}
-
-% \parseargdef\foo{...}
-%	is roughly equivalent to
-% \def\foo{\parsearg\Xfoo}
-% \def\Xfoo#1{...}
-%
-% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
-% favourite TeX trick.  --kasal, 16nov03
-
-\def\parseargdef#1{%
-  \expandafter \doparseargdef \csname\string#1\endcsname #1%
-}
-\def\doparseargdef#1#2{%
-  \def#2{\parsearg#1}%
-  \def#1##1%
-}
-
-% Several utility definitions with active space:
-{
+\begingroup
   \obeyspaces
-  \gdef\obeyedspace{ }
-
-  % Make each space character in the input produce a normal interword
-  % space in the output.  Don't allow a line break at this space, as this
-  % is used only in environments like @example, where each line of input
-  % should produce a line of output anyway.
-  %
-  \gdef\sepspaces{\obeyspaces\let =\tie}
-
-  % If an index command is used in an @example environment, any spaces
-  % therein should become regular spaces in the raw index file, not the
-  % expansion of \tie (\leavevmode \penalty \@M \ ).
-  \gdef\unsepspaces{\let =\space}
-}
+  \gdef\ignoreactivespaces{\obeyspaces\let =\empty}
+\endgroup
 
 
 \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
 
-% Define the framework for environments in texinfo.tex.  It's used like this:
-%
-%   \envdef\foo{...}
-%   \def\Efoo{...}
-%
-% It's the responsibility of \envdef to insert \begingroup before the
-% actual body; @end closes the group after calling \Efoo.  \envdef also
-% defines \thisenv, so the current environment is known; @end checks
-% whether the environment name matches.  The \checkenv macro can also be
-% used to check whether the current environment is the one expected.
-%
-% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
-% are not treated as enviroments; they don't open a group.  (The
-% implementation of @end takes care not to call \endgroup in this
-% special case.)
+%% These are used to keep @begin/@end levels from running away
+%% Call \inENV within environments (after a \begingroup)
+\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
+\def\ENVcheck{%
+\ifENV\errmessage{Still within an environment; press RETURN to continue}
+\endgroup\fi} % This is not perfect, but it should reduce lossage
 
+% @begin foo  is the same as @foo, for now.
+\newhelp\EMsimple{Press RETURN to continue.}
 
-% At runtime, environments start with this:
-\def\startenvironment#1{\begingroup\def\thisenv{#1}}
-% initialize
-\let\thisenv\empty
+\outer\def\begin{\parsearg\beginxxx}
 
-% ... but they get defined via ``\envdef\foo{...}'':
-\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
-\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
+\def\beginxxx #1{%
+\expandafter\ifx\csname #1\endcsname\relax
+{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
+\csname #1\endcsname\fi}
 
-% Check whether we're in the right environment:
-\def\checkenv#1{%
-  \def\temp{#1}%
-  \ifx\thisenv\temp
+% @end foo executes the definition of \Efoo.
+%
+\def\end{\parsearg\endxxx}
+\def\endxxx #1{%
+  \removeactivespaces{#1}%
+  \edef\endthing{\the\toks0}%
+  %
+  \expandafter\ifx\csname E\endthing\endcsname\relax
+    \expandafter\ifx\csname \endthing\endcsname\relax
+      % There's no \foo, i.e., no ``environment'' foo.
+      \errhelp = \EMsimple
+      \errmessage{Undefined command `@end \endthing'}%
+    \else
+      \unmatchedenderror\endthing
+    \fi
   \else
-    \badenverr
+    % Everything's ok; the right environment has been started.
+    \csname E\endthing\endcsname
   \fi
 }
 
-% Evironment mismatch, #1 expected:
-\def\badenverr{%
+% There is an environment #1, but it hasn't been started.  Give an error.
+%
+\def\unmatchedenderror#1{%
   \errhelp = \EMsimple
-  \errmessage{This command can appear only \inenvironment\temp,
-    not \inenvironment\thisenv}%
-}
-\def\inenvironment#1{%
-  \ifx#1\empty
-    out of any environment%
-  \else
-    in environment \expandafter\string#1%
-  \fi
+  \errmessage{This `@end #1' doesn't have a matching `@#1'}%
 }
 
-% @end foo executes the definition of \Efoo.
-% But first, it executes a specialized version of \checkenv
+% Define the control sequence \E#1 to give an unmatched @end error.
 %
-\parseargdef\end{%
-  \if 1\csname iscond.#1\endcsname
-  \else
-    % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03
-    \expandafter\checkenv\csname#1\endcsname
-    \csname E#1\endcsname
-    \endgroup
-  \fi
+\def\defineunmatchedend#1{%
+  \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
 }
 
-\newhelp\EMsimple{Press RETURN to continue.}
-
 
 %% Simple single-character @ commands
 
@@ -576,9 +496,6 @@
   !gdef!rbraceatcmd[@}]%
 !endgroup
 
-% @comma{} to avoid , parsing problems.
-\let\comma = ,
-
 % Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
 % Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
 \let\, = \c
@@ -588,12 +505,10 @@
 \let\ubaraccent = \b
 \let\udotaccent = \d
 
-% Other special characters: @questiondown @exclamdown @ordf @ordm
+% Other special characters: @questiondown @exclamdown
 % Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
 \def\questiondown{?`}
 \def\exclamdown{!`}
-\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
-\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
 
 % Dotless i and dotless j, used for accents.
 \def\imacro{i}
@@ -606,25 +521,6 @@
   \fi\fi
 }
 
-% The \TeX{} logo, as in plain, but resetting the spacing so that a
-% period following counts as ending a sentence.  (Idea found in latex.)
-%
-\edef\TeX{\TeX \spacefactor=1000 }
-
-% @LaTeX{} logo.  Not quite the same results as the definition in
-% latex.ltx, since we use a different font for the raised A; it's most
-% convenient for us to use an explicitly smaller font, rather than using
-% the \scriptstyle font (since we don't reset \scriptstyle and
-% \scriptscriptstyle).
-%
-\def\LaTeX{%
-  L\kern-.36em
-  {\setbox0=\hbox{T}%
-   \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}%
-  \kern-.15em
-  \TeX
-}
-
 % Be sure we're in horizontal mode when doing a tie, since we make space
 % equivalent to this in @example-like environments. Otherwise, a space
 % at the beginning of a line will start with \penalty -- and
@@ -678,14 +574,59 @@
 \newbox\groupbox
 \def\vfilllimit{0.7}
 %
-\envdef\group{%
-  \ifnum\catcode`\^^M=\active \else
+\def\group{\begingroup
+  \ifnum\catcode13=\active \else
     \errhelp = \groupinvalidhelp
     \errmessage{@group invalid in context where filling is enabled}%
   \fi
-  \startsavinginserts
+  %
+  % The \vtop we start below produces a box with normal height and large
+  % depth; thus, TeX puts \baselineskip glue before it, and (when the
+  % next line of text is done) \lineskip glue after it.  (See p.82 of
+  % the TeXbook.)  Thus, space below is not quite equal to space
+  % above.  But it's pretty close.
+  \def\Egroup{%
+    \egroup           % End the \vtop.
+    % \dimen0 is the vertical size of the group's box.
+    \dimen0 = \ht\groupbox  \advance\dimen0 by \dp\groupbox
+    % \dimen2 is how much space is left on the page (more or less).
+    \dimen2 = \pageheight   \advance\dimen2 by -\pagetotal
+    % if the group doesn't fit on the current page, and it's a big big
+    % group, force a page break.
+    \ifdim \dimen0 > \dimen2
+      \ifdim \pagetotal < \vfilllimit\pageheight
+        \page
+      \fi
+    \fi
+    \copy\groupbox
+    \endgroup         % End the \group.
+  }%
   %
   \setbox\groupbox = \vtop\bgroup
+    % We have to put a strut on the last line in case the @group is in
+    % the midst of an example, rather than completely enclosing it.
+    % Otherwise, the interline space between the last line of the group
+    % and the first line afterwards is too small.  But we can't put the
+    % strut in \Egroup, since there it would be on a line by itself.
+    % Hence this just inserts a strut at the beginning of each line.
+    \everypar = {\strut}%
+    %
+    % Since we have a strut on every line, we don't need any of TeX's
+    % normal interline spacing.
+    \offinterlineskip
+    %
+    % OK, but now we have to do something about blank
+    % lines in the input in @example-like environments, which normally
+    % just turn into \lisppar, which will insert no space now that we've
+    % turned off the interline space.  Simplest is to make them be an
+    % empty paragraph.
+    \ifx\par\lisppar
+      \edef\par{\leavevmode \par}%
+      %
+      % Reset ^^M's definition to new definition of \par.
+      \obeylines
+    \fi
+    %
     % Do @comment since we are called inside an environment such as
     % @example, where each end-of-line in the input causes an
     % end-of-line in the output.  We don't want the end-of-line after
@@ -695,32 +636,6 @@
     \comment
 }
 %
-% The \vtop produces a box with normal height and large depth; thus, TeX puts
-% \baselineskip glue before it, and (when the next line of text is done)
-% \lineskip glue after it.  Thus, space below is not quite equal to space
-% above.  But it's pretty close.
-\def\Egroup{%
-    % To get correct interline space between the last line of the group
-    % and the first line afterwards, we have to propagate \prevdepth.
-    \endgraf % Not \par, as it may have been set to \lisppar.
-    \global\dimen1 = \prevdepth
-  \egroup           % End the \vtop.
-  % \dimen0 is the vertical size of the group's box.
-  \dimen0 = \ht\groupbox  \advance\dimen0 by \dp\groupbox
-  % \dimen2 is how much space is left on the page (more or less).
-  \dimen2 = \pageheight   \advance\dimen2 by -\pagetotal
-  % if the group doesn't fit on the current page, and it's a big big
-  % group, force a page break.
-  \ifdim \dimen0 > \dimen2
-    \ifdim \pagetotal < \vfilllimit\pageheight
-      \page
-    \fi
-  \fi
-  \box\groupbox
-  \prevdepth = \dimen1
-  \checkinserts
-}
-%
 % TeX puts in an \escapechar (i.e., `@') at the beginning of the help
 % message, so this ends up printing `@group can only ...'.
 %
@@ -733,8 +648,10 @@ where each line of input produces a line of output.}
 
 \newdimen\mil  \mil=0.001in
 
+\def\need{\parsearg\needx}
+
 % Old definition--didn't work.
-%\parseargdef\need{\par %
+%\def\needx #1{\par %
 %% This method tries to make TeX break the page naturally
 %% if the depth of the box does not fit.
 %{\baselineskip=0pt%
@@ -742,7 +659,7 @@ where each line of input produces a line of output.}
 %\prevdepth=-1000pt
 %}}
 
-\parseargdef\need{%
+\def\needx#1{%
   % Ensure vertical mode, so we don't make a big box in the middle of a
   % paragraph.
   \par
@@ -781,10 +698,35 @@ where each line of input produces a line of output.}
   \fi
 }
 
-% @br   forces paragraph break (and is undocumented).
+% @br   forces paragraph break
 
 \let\br = \par
 
+% @dots{} output an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in a typewriter
+% font as three actual period characters.
+%
+\def\dots{%
+  \leavevmode
+  \hbox to 1.5em{%
+    \hskip 0pt plus 0.25fil minus 0.25fil
+    .\hss.\hss.%
+    \hskip 0pt plus 0.5fil minus 0.5fil
+  }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+  \leavevmode
+  \hbox to 2em{%
+    \hskip 0pt plus 0.25fil minus 0.25fil
+    .\hss.\hss.\hss.%
+    \hskip 0pt plus 0.5fil minus 0.5fil
+  }%
+  \spacefactor=3000
+}
+
 % @page forces the start of a new page.
 %
 \def\page{\par\vfill\supereject}
@@ -797,11 +739,13 @@ where each line of input produces a line of output.}
 \newskip\exdentamount
 
 % This defn is used inside fill environments such as @defun.
-\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
+\def\exdent{\parsearg\exdentyyy}
+\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
 
 % This defn is used inside nofill environments such as @example.
-\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
-  \leftline{\hskip\leftskip{\rm#1}}}}
+\def\nofillexdent{\parsearg\nofillexdentyyy}
+\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
+\leftline{\hskip\leftskip{\rm#1}}}}
 
 % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
 % paragraph.  For more general purposes, use the \margin insertion
@@ -853,19 +797,8 @@ where each line of input produces a line of output.}
 }
 
 % @include file    insert text of that file as input.
-%
-\def\include{\parseargusing\filenamecatcodes\includezzz}
-\def\includezzz#1{%
-  \pushthisfilestack
-  \def\thisfile{#1}%
-  {%
-    \makevalueexpandable
-    \def\temp{\input #1 }%
-    \expandafter
-  }\temp
-  \popthisfilestack
-}
-\def\filenamecatcodes{%
+% Allow normal characters that  we make active in the argument (a file name).
+\def\include{\begingroup
   \catcode`\\=\other
   \catcode`~=\other
   \catcode`^=\other
@@ -874,50 +807,33 @@ where each line of input produces a line of output.}
   \catcode`<=\other
   \catcode`>=\other
   \catcode`+=\other
-  \catcode`-=\other
-}
-
-\def\pushthisfilestack{%
-  \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
-}
-\def\pushthisfilestackX{%
-  \expandafter\pushthisfilestackY\thisfile\StackTerm
-}
-\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
-  \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
-}
-
-\def\popthisfilestack{\errthisfilestackempty}
-\def\errthisfilestackempty{\errmessage{Internal error:
-  the stack of filenames is empty.}}
+  \parsearg\includezzz}
+% Restore active chars for included file.
+\def\includezzz#1{\endgroup\begingroup
+  % Read the included file in a group so nested @include's work.
+  \def\thisfile{#1}%
+  \let\value=\expandablevalue
+  \input\thisfile
+\endgroup}
 
 \def\thisfile{}
 
 % @center line
 % outputs that line, centered.
 %
-\parseargdef\center{%
-  \ifhmode
-    \let\next\centerH
-  \else
-    \let\next\centerV
-  \fi
-  \next{\hfil \ignorespaces#1\unskip \hfil}%
-}
-\def\centerH#1{%
-  {%
-    \hfil\break
-    \advance\hsize by -\leftskip
-    \advance\hsize by -\rightskip
-    \line{#1}%
-    \break
-  }%
-}
-\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
+\def\center{\parsearg\docenter}
+\def\docenter#1{{%
+  \ifhmode \hfil\break \fi
+  \advance\hsize by -\leftskip
+  \advance\hsize by -\rightskip
+  \line{\hfil \ignorespaces#1\unskip \hfil}%
+  \ifhmode \break \fi
+}}
 
 % @sp n   outputs n lines of vertical space
 
-\parseargdef\sp{\vskip #1\baselineskip}
+\def\sp{\parsearg\spxxx}
+\def\spxxx #1{\vskip #1\baselineskip}
 
 % @comment ...line which is ignored...
 % @c is the same as @comment
@@ -938,7 +854,8 @@ where each line of input produces a line of output.}
 \def\asisword{asis} % no translation, these are keywords
 \def\noneword{none}
 %
-\parseargdef\paragraphindent{%
+\def\paragraphindent{\parsearg\doparagraphindent}
+\def\doparagraphindent#1{%
   \def\temp{#1}%
   \ifx\temp\asisword
   \else
@@ -955,7 +872,8 @@ where each line of input produces a line of output.}
 % We'll use ems for NCHARS like @paragraphindent.
 % It seems @exampleindent asis isn't necessary, but
 % I preserve it to make it similar to @paragraphindent.
-\parseargdef\exampleindent{%
+\def\exampleindent{\parsearg\doexampleindent}
+\def\doexampleindent#1{%
   \def\temp{#1}%
   \ifx\temp\asisword
   \else
@@ -969,18 +887,21 @@ where each line of input produces a line of output.}
 
 % @firstparagraphindent WORD
 % If WORD is `none', then suppress indentation of the first paragraph
-% after a section heading.  If WORD is `insert', then do indent at such
+% after a section heading.  If WORD is `insert', then do indentat such
 % paragraphs.
 %
 % The paragraph indentation is suppressed or not by calling
-% \suppressfirstparagraphindent, which the sectioning commands do.
-% We switch the definition of this back and forth according to WORD.
-% By default, we suppress indentation.
+% \suppressfirstparagraphindent, which the sectioning commands do.  We
+% switch the definition of this back and forth according to WORD.  By
+% default, we suppress indentation.
 %
 \def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
+\newdimen\currentparindent
+%
 \def\insertword{insert}
 %
-\parseargdef\firstparagraphindent{%
+\def\firstparagraphindent{\parsearg\dofirstparagraphindent}
+\def\dofirstparagraphindent#1{%
   \def\temp{#1}%
   \ifx\temp\noneword
     \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
@@ -1000,24 +921,15 @@ where each line of input produces a line of output.}
 %
 \gdef\dosuppressfirstparagraphindent{%
   \gdef\indent{%
-    \restorefirstparagraphindent
-    \indent
-  }%
-  \gdef\noindent{%
-    \restorefirstparagraphindent
-    \noindent
+    \global\let\indent=\ptexindent
+    \global\everypar = {}%
   }%
   \global\everypar = {%
-    \kern -\parindent
-    \restorefirstparagraphindent
+    \kern-\parindent
+    \global\let\indent=\ptexindent
+    \global\everypar = {}%
   }%
-}
-
-\gdef\restorefirstparagraphindent{%
-  \global \let \indent = \ptexindent
-  \global \let \noindent = \ptexnoindent
-  \global \everypar = {}%
-}
+}%
 
 
 % @asis just yields its argument.  Used with @table, for example.
@@ -1025,18 +937,23 @@ where each line of input produces a line of output.}
 \def\asis#1{#1}
 
 % @math outputs its argument in math mode.
+% We don't use $'s directly in the definition of \math because we need
+% to set catcodes according to plain TeX first, to allow for subscripts,
+% superscripts, special math chars, etc.
+%
+\let\implicitmath = $%$ font-lock fix
 %
 % One complication: _ usually means subscripts, but it could also mean
 % an actual _ character, as in @math{@var{some_variable} + 1}.  So make
-% _ active, and distinguish by seeing if the current family is \slfam,
-% which is what @var uses.
-{
-  \catcode\underChar = \active
-  \gdef\mathunderscore{%
-    \catcode\underChar=\active
-    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
-  }
-}
+% _ within @math be active (mathcode "8000), and distinguish by seeing
+% if the current family is \slfam, which is what @var uses.
+%
+{\catcode\underChar = \active
+\gdef\mathunderscore{%
+  \catcode\underChar=\active
+  \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+}}
+%
 % Another complication: we want \\ (and @\) to output a \ character.
 % FYI, plain.tex uses \\ as a temporary control sequence (why?), but
 % this is not advertised and we don't care.  Texinfo does not
@@ -1047,16 +964,15 @@ where each line of input produces a line of output.}
 %
 \def\math{%
   \tex
-  \mathunderscore
+  \mathcode`\_="8000 \mathunderscore
   \let\\ = \mathbackslash
   \mathactive
-  $\finishmath
-}
-\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
+  \implicitmath\finishmath}
+\def\finishmath#1{#1\implicitmath\Etex}
 
 % Some active characters (such as <) are spaced differently in math.
-% We have to reset their definitions in case the @math was an argument
-% to a command which sets the catcodes (such as @item or @section).
+% We have to reset their definitions in case the @math was an
+% argument to a command which set the catcodes (such as @item or @section).
 %
 {
   \catcode`^ = \active
@@ -1072,33 +988,8 @@ where each line of input produces a line of output.}
 }
 
 % @bullet and @minus need the same treatment as @math, just above.
-\def\bullet{$\ptexbullet$}
-\def\minus{$-$}
-
-% @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
-%
-\def\dots{%
-  \leavevmode
-  \hbox to 1.5em{%
-    \hskip 0pt plus 0.25fil
-    .\hfil.\hfil.%
-    \hskip 0pt plus 0.5fil
-  }%
-}
-
-% @enddots{} is an end-of-sentence ellipsis.
-%
-\def\enddots{%
-  \dots
-  \spacefactor=3000
-}
-
-% @comma{} is so commas can be inserted into text without messing up
-% Texinfo's parsing.
-%
-\let\comma = ,
+\def\bullet{\implicitmath\ptexbullet\implicitmath}
+\def\minus{\implicitmath-\implicitmath}
 
 % @refill is a no-op.
 \let\refill=\relax
@@ -1114,20 +1005,20 @@ where each line of input produces a line of output.}
 % So open here the files we need to have open while reading the input.
 % This makes it possible to make a .fmt file for texinfo.
 \def\setfilename{%
-   \fixbackslash  % Turn off hack to swallow `\input texinfo'.
    \iflinks
-     \tryauxfile
-     % Open the new aux file.  TeX will close it automatically at exit.
-     \immediate\openout\auxfile=\jobname.aux
+     \readauxfile
    \fi % \openindices needs to do some work in any case.
    \openindices
-   \let\setfilename=\comment % Ignore extra @setfilename cmds.
+   \fixbackslash  % Turn off hack to swallow `\input texinfo'.
+   \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
    %
    % If texinfo.cnf is present on the system, read it.
    % Useful for site-wide @afourpaper, etc.
+   % Just to be on the safe side, close the input stream before the \input.
    \openin 1 texinfo.cnf
-   \ifeof 1 \else \input texinfo.cnf \fi
-   \closein 1
+   \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
+   \closein1
+   \temp
    %
    \comment % Ignore the actual filename.
 }
@@ -1163,23 +1054,17 @@ where each line of input produces a line of output.}
 \newif\ifpdf
 \newif\ifpdfmakepagedest
 
-% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
-% can be set).  So we test for \relax and 0 as well as \undefined,
-% borrowed from ifpdf.sty.
 \ifx\pdfoutput\undefined
+  \pdffalse
+  \let\pdfmkdest = \gobble
+  \let\pdfurl = \gobble
+  \let\endlink = \relax
+  \let\linkcolor = \relax
+  \let\pdfmakeoutlines = \relax
 \else
-  \ifx\pdfoutput\relax
-  \else
-    \ifcase\pdfoutput
-    \else
-      \pdftrue
-    \fi
-  \fi
-\fi
-%
-\ifpdf
+  \pdftrue
+  \pdfoutput = 1
   \input pdfcolor
-  \pdfcatalog{/PageMode /UseOutlines}%
   \def\dopdfimage#1#2#3{%
     \def\imagewidth{#2}%
     \def\imageheight{#3}%
@@ -1200,13 +1085,7 @@ where each line of input produces a line of output.}
     \ifnum\pdftexversion < 14 \else
       \pdfrefximage \pdflastximage
     \fi}
-  \def\pdfmkdest#1{{%
-    % We have to set dummies so commands such as @code in a section title
-    % aren't expanded.
-    \atdummies
-    \normalturnoffactive
-    \pdfdest name{#1} xyz%
-  }}
+  \def\pdfmkdest#1{{\normalturnoffactive \pdfdest name{#1} xyz}}
   \def\pdfmkpgn#1{#1}
   \let\linkcolor = \Blue  % was Cyan, but that seems light?
   \def\endlink{\Black\pdfendlink}
@@ -1215,94 +1094,48 @@ where each line of input produces a line of output.}
   \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
     \else \csname#1\endcsname \fi}
   \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
-    \advance\tempnum by 1
+    \advance\tempnum by1
     \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
-  %
-  % #1 is the section text.  #2 is the pdf expression for the number
-  % of subentries (or empty, for subsubsections).  #3 is the node
-  % text, which might be empty if this toc entry had no
-  % corresponding node.  #4 is the page number.
-  %
-  \def\dopdfoutline#1#2#3#4{%
-    % Generate a link to the node text if that exists; else, use the
-    % page number.  We could generate a destination for the section
-    % text in the case where a section has no node, but it doesn't
-    % seem worthwhile, since most documents are normally structured.
-    \def\pdfoutlinedest{#3}%
-    \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi
-    %
-    \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}%
-  }
-  %
-  \def\pdfmakeoutlines{%
-    \begingroup
+  \def\pdfmakeoutlines{{%
+    \openin 1 \jobname.toc
+    \ifeof 1\else\begingroup
+      \closein 1
       % Thanh's hack / proper braces in bookmarks
       \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
       \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
       %
-      % Read toc silently, to get counts of subentries for \pdfoutline.
-      \def\numchapentry##1##2##3##4{%
-	\def\thischapnum{##2}%
-	\def\thissecnum{0}%
-	\def\thissubsecnum{0}%
-      }%
-      \def\numsecentry##1##2##3##4{%
-	\advancenumber{chap\thischapnum}%
-	\def\thissecnum{##2}%
-	\def\thissubsecnum{0}%
-      }%
-      \def\numsubsecentry##1##2##3##4{%
-	\advancenumber{sec\thissecnum}%
-	\def\thissubsecnum{##2}%
-      }%
-      \def\numsubsubsecentry##1##2##3##4{%
-	\advancenumber{subsec\thissubsecnum}%
-      }%
-      \def\thischapnum{0}%
-      \def\thissecnum{0}%
-      \def\thissubsecnum{0}%
-      %
-      % use \def rather than \let here because we redefine \chapentry et
-      % al. a second time, below.
-      \def\appentry{\numchapentry}%
-      \def\appsecentry{\numsecentry}%
-      \def\appsubsecentry{\numsubsecentry}%
-      \def\appsubsubsecentry{\numsubsubsecentry}%
-      \def\unnchapentry{\numchapentry}%
-      \def\unnsecentry{\numsecentry}%
-      \def\unnsubsecentry{\numsubsecentry}%
-      \def\unnsubsubsecentry{\numsubsubsecentry}%
+      \def\chapentry ##1##2##3{}
+      \def\secentry ##1##2##3##4{\advancenumber{chap##2}}
+      \def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}}
+      \def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}}
+      \let\appendixentry = \chapentry
+      \let\unnumbchapentry = \chapentry
+      \let\unnumbsecentry = \secentry
+      \let\unnumbsubsecentry = \subsecentry
+      \let\unnumbsubsubsecentry = \subsubsecentry
       \input \jobname.toc
+      \def\chapentry ##1##2##3{%
+        \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}}
+      \def\secentry ##1##2##3##4{%
+        \pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}}
+      \def\subsecentry ##1##2##3##4##5{%
+        \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}}
+      \def\subsubsecentry ##1##2##3##4##5##6{%
+        \pdfoutline goto name{\pdfmkpgn{##6}}{##1}}
+      \let\appendixentry = \chapentry
+      \let\unnumbchapentry = \chapentry
+      \let\unnumbsecentry = \secentry
+      \let\unnumbsubsecentry = \subsecentry
+      \let\unnumbsubsubsecentry = \subsubsecentry
       %
-      % Read toc second time, this time actually producing the outlines.
-      % The `-' means take the \expnumber as the absolute number of
-      % subentries, which we calculated on our first read of the .toc above.
-      %
-      % We use the node names as the destinations.
-      \def\numchapentry##1##2##3##4{%
-        \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
-      \def\numsecentry##1##2##3##4{%
-        \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
-      \def\numsubsecentry##1##2##3##4{%
-        \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
-      \def\numsubsubsecentry##1##2##3##4{% count is always zero
-        \dopdfoutline{##1}{}{##3}{##4}}%
+      % Make special characters normal for writing to the pdf file.
       %
-      % PDF outlines are displayed using system fonts, instead of
-      % document fonts.  Therefore we cannot use special characters,
-      % since the encoding is unknown.  For example, the eogonek from
-      % Latin 2 (0xea) gets translated to a | character.  Info from
-      % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
-      %
-      % xx to do this right, we have to translate 8-bit characters to
-      % their "best" equivalent, based on the @documentencoding.  Right
-      % now, I guess we'll just let the pdf reader have its way.
       \indexnofonts
+      \let\tt=\relax
       \turnoffactive
       \input \jobname.toc
-    \endgroup
-  }
-  %
+    \endgroup\fi
+  }}
   \def\makelinks #1,{%
     \def\params{#1}\def\E{END}%
     \ifx\params\E
@@ -1333,6 +1166,7 @@ where each line of input produces a line of output.}
   \def\ppn#1{\pgn=#1\gobble}
   \def\ppnn{\pgn=\first}
   \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
+  \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
   \def\skipspaces#1{\def\PP{#1}\def\D{|}%
     \ifx\PP\D\let\nextsp\relax
     \else\let\nextsp\skipspaces
@@ -1350,17 +1184,18 @@ where each line of input produces a line of output.}
   \def\pdfurl#1{%
     \begingroup
       \normalturnoffactive\def\@{@}%
-      \makevalueexpandable
+      \let\value=\expandablevalue
       \leavevmode\Red
       \startlink attr{/Border [0 0 0]}%
         user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
+        % #1
     \endgroup}
   \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
   \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
   \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
   \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
   \def\maketoks{%
-    \expandafter\poptoks\the\toksA|ENDTOKS|\relax
+    \expandafter\poptoks\the\toksA|ENDTOKS|
     \ifx\first0\adn0
     \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
     \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
@@ -1380,44 +1215,20 @@ where each line of input produces a line of output.}
     \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
     \linkcolor #1\endlink}
   \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
-\else
-  \let\pdfmkdest = \gobble
-  \let\pdfurl = \gobble
-  \let\endlink = \relax
-  \let\linkcolor = \relax
-  \let\pdfmakeoutlines = \relax
-\fi  % \ifx\pdfoutput
+\fi % \ifx\pdfoutput
 
 
 \message{fonts,}
-
-% Change the current font style to #1, remembering it in \curfontstyle.
-% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
-% italics, not bold italics.
-%
-\def\setfontstyle#1{%
-  \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
-  \csname ten#1\endcsname  % change the current font
-}
-
-% Select #1 fonts with the current style.
-%
-\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
-
-\def\rm{\fam=0 \setfontstyle{rm}}
-\def\it{\fam=\itfam \setfontstyle{it}}
-\def\sl{\fam=\slfam \setfontstyle{sl}}
-\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
-\def\tt{\fam=\ttfam \setfontstyle{tt}}
+% Font-change commands.
 
 % Texinfo sort of supports the sans serif font style, which plain TeX does not.
-% So we set up a \sf.
+% So we set up a \sf analogous to plain's \rm, etc.
 \newfam\sffam
-\def\sf{\fam=\sffam \setfontstyle{sf}}
+\def\sf{\fam=\sffam \tensf}
 \let\li = \sf % Sometimes we call it \li, not \sf.
 
-% We don't need math for this font style.
-\def\ttsl{\setfontstyle{ttsl}}
+% We don't need math for this one.
+\def\ttsl{\tenttsl}
 
 % Default leading.
 \newdimen\textleading  \textleading = 13.2pt
@@ -1468,11 +1279,21 @@ where each line of input produces a line of output.}
 \def\scshape{csc}
 \def\scbshape{csc}
 
-% Text fonts (11.2pt, magstep1).
-\def\textnominalsize{11pt}
-\edef\mainmagstep{\magstephalf}
-\setfont\textrm\rmshape{10}{\mainmagstep}
-\setfont\texttt\ttshape{10}{\mainmagstep}
+\newcount\mainmagstep
+\ifx\bigger\relax
+  % not really supported.
+  \mainmagstep=\magstep1
+  \setfont\textrm\rmshape{12}{1000}
+  \setfont\texttt\ttshape{12}{1000}
+\else
+  \mainmagstep=\magstephalf
+  \setfont\textrm\rmshape{10}{\mainmagstep}
+  \setfont\texttt\ttshape{10}{\mainmagstep}
+\fi
+% Instead of cmb10, you may want to use cmbx10.
+% cmbx10 is a prettier font on its own, but cmb10
+% looks better when embedded in a line with cmr10
+% (in Bob's opinion).
 \setfont\textbf\bfshape{10}{\mainmagstep}
 \setfont\textit\itshape{10}{\mainmagstep}
 \setfont\textsl\slshape{10}{\mainmagstep}
@@ -1482,14 +1303,12 @@ where each line of input produces a line of output.}
 \font\texti=cmmi10 scaled \mainmagstep
 \font\textsy=cmsy10 scaled \mainmagstep
 
-% A few fonts for @defun names and args.
-\setfont\defbf\bfshape{10}{\magstep1}
+% A few fonts for @defun, etc.
+\setfont\defbf\bxshape{10}{\magstep1} %was 1314
 \setfont\deftt\ttshape{10}{\magstep1}
-\setfont\defttsl\ttslshape{10}{\magstep1}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
 
 % Fonts for indices, footnotes, small examples (9pt).
-\def\smallnominalsize{9pt}
 \setfont\smallrm\rmshape{9}{1000}
 \setfont\smalltt\ttshape{9}{1000}
 \setfont\smallbf\bfshape{10}{900}
@@ -1502,7 +1321,6 @@ where each line of input produces a line of output.}
 \font\smallsy=cmsy9
 
 % Fonts for small examples (8pt).
-\def\smallernominalsize{8pt}
 \setfont\smallerrm\rmshape{8}{1000}
 \setfont\smallertt\ttshape{8}{1000}
 \setfont\smallerbf\bfshape{10}{800}
@@ -1514,8 +1332,7 @@ where each line of input produces a line of output.}
 \font\smalleri=cmmi8
 \font\smallersy=cmsy8
 
-% Fonts for title page (20.4pt):
-\def\titlenominalsize{20pt}
+% Fonts for title page:
 \setfont\titlerm\rmbshape{12}{\magstep3}
 \setfont\titleit\itbshape{10}{\magstep4}
 \setfont\titlesl\slbshape{10}{\magstep4}
@@ -1530,7 +1347,6 @@ where each line of input produces a line of output.}
 \def\authortt{\sectt}
 
 % Chapter (and unnumbered) fonts (17.28pt).
-\def\chapnominalsize{17pt}
 \setfont\chaprm\rmbshape{12}{\magstep2}
 \setfont\chapit\itbshape{10}{\magstep3}
 \setfont\chapsl\slbshape{10}{\magstep3}
@@ -1543,7 +1359,6 @@ where each line of input produces a line of output.}
 \font\chapsy=cmsy10 scaled \magstep3
 
 % Section fonts (14.4pt).
-\def\secnominalsize{14pt}
 \setfont\secrm\rmbshape{12}{\magstep1}
 \setfont\secit\itbshape{10}{\magstep2}
 \setfont\secsl\slbshape{10}{\magstep2}
@@ -1556,7 +1371,6 @@ where each line of input produces a line of output.}
 \font\secsy=cmsy10 scaled \magstep2
 
 % Subsection fonts (13.15pt).
-\def\ssecnominalsize{13pt}
 \setfont\ssecrm\rmbshape{12}{\magstephalf}
 \setfont\ssecit\itbshape{10}{1315}
 \setfont\ssecsl\slbshape{10}{1315}
@@ -1564,22 +1378,11 @@ where each line of input produces a line of output.}
 \setfont\ssecttsl\ttslshape{10}{1315}
 \setfont\ssecsf\sfbshape{12}{\magstephalf}
 \let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{1315}
+\setfont\ssecsc\scbshape{10}{\magstep1}
 \font\sseci=cmmi12 scaled \magstephalf
 \font\ssecsy=cmsy10 scaled 1315
-
-% Reduced fonts for @acro in text (10pt).
-\def\reducednominalsize{10pt}
-\setfont\reducedrm\rmshape{10}{1000}
-\setfont\reducedtt\ttshape{10}{1000}
-\setfont\reducedbf\bfshape{10}{1000}
-\setfont\reducedit\itshape{10}{1000}
-\setfont\reducedsl\slshape{10}{1000}
-\setfont\reducedsf\sfshape{10}{1000}
-\setfont\reducedsc\scshape{10}{1000}
-\setfont\reducedttsl\ttslshape{10}{1000}
-\font\reducedi=cmmi10
-\font\reducedsy=cmsy10
+% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
+% but that is not a standard magnification.
 
 % In order for the font changes to affect most math symbols and letters,
 % we have to define the \textfont of the standard families.  Since
@@ -1594,81 +1397,50 @@ where each line of input produces a line of output.}
 }
 
 % The font-changing commands redefine the meanings of \tenSTYLE, instead
-% of just \STYLE.  We do this because \STYLE needs to also set the
-% current \fam for math mode.  Our \STYLE (e.g., \rm) commands hardwire
-% \tenSTYLE to set the current font.
-%
-% Each font-changing command also sets the names \lsize (one size lower)
-% and \lllsize (three sizes lower).  These relative commands are used in
-% the LaTeX logo and acronyms.
-%
-% This all needs generalizing, badly.
-%
+% of just \STYLE.  We do this so that font changes will continue to work
+% in math mode, where it is the current \fam that is relevant in most
+% cases, not the current font.  Plain TeX does \def\bf{\fam=\bffam
+% \tenbf}, for example.  By redefining \tenbf, we obviate the need to
+% redefine \bf itself.
 \def\textfonts{%
   \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
   \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
-  \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
-  \let\tenttsl=\textttsl
-  \def\curfontsize{text}%
-  \def\lsize{reduced}\def\lllsize{smaller}%
+  \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
   \resetmathfonts \setleading{\textleading}}
 \def\titlefonts{%
   \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
   \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
   \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
   \let\tenttsl=\titlettsl
-  \def\curfontsize{title}%
-  \def\lsize{chap}\def\lllsize{subsec}%
   \resetmathfonts \setleading{25pt}}
 \def\titlefont#1{{\titlefonts\rm #1}}
 \def\chapfonts{%
   \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
   \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
-  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
-  \let\tenttsl=\chapttsl
-  \def\curfontsize{chap}%
-  \def\lsize{sec}\def\lllsize{text}%
+  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
   \resetmathfonts \setleading{19pt}}
 \def\secfonts{%
   \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
   \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
-  \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
-  \let\tenttsl=\secttsl
-  \def\curfontsize{sec}%
-  \def\lsize{subsec}\def\lllsize{reduced}%
+  \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
   \resetmathfonts \setleading{16pt}}
 \def\subsecfonts{%
   \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
   \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
-  \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
-  \let\tenttsl=\ssecttsl
-  \def\curfontsize{ssec}%
-  \def\lsize{text}\def\lllsize{small}%
+  \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
   \resetmathfonts \setleading{15pt}}
-\let\subsubsecfonts = \subsecfonts
-\def\reducedfonts{%
-  \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
-  \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
-  \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
-  \let\tenttsl=\reducedttsl
-  \def\curfontsize{reduced}%
-  \def\lsize{small}\def\lllsize{smaller}%
-  \resetmathfonts \setleading{10.5pt}}
+\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
 \def\smallfonts{%
   \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
   \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
   \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
   \let\tenttsl=\smallttsl
-  \def\curfontsize{small}%
-  \def\lsize{smaller}\def\lllsize{smaller}%
   \resetmathfonts \setleading{10.5pt}}
 \def\smallerfonts{%
   \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
   \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
   \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
   \let\tenttsl=\smallerttsl
-  \def\curfontsize{smaller}%
-  \def\lsize{smaller}\def\lllsize{smaller}%
   \resetmathfonts \setleading{9.5pt}}
 
 % Set the fonts to use with the @small... environments.
@@ -1677,7 +1449,7 @@ where each line of input produces a line of output.}
 % About \smallexamplefonts.  If we use \smallfonts (9pt), @smallexample
 % can fit this many characters:
 %   8.5x11=86   smallbook=72  a4=90  a5=69
-% If we use \scriptfonts (8pt), then we can fit this many characters:
+% If we use \smallerfonts (8pt), then we can fit this many characters:
 %   8.5x11=90+  smallbook=80  a4=90+  a5=77
 % For me, subjectively, the few extra characters that fit aren't worth
 % the additional smallness of 8pt.  So I'm making the default 9pt.
@@ -1685,13 +1457,14 @@ where each line of input produces a line of output.}
 % By the way, for comparison, here's what fits with @example (10pt):
 %   8.5x11=71  smallbook=60  a4=75  a5=58
 %
-% I wish the USA used A4 paper.
+% I wish we used A4 paper on this side of the Atlantic.
+%
 % --karl, 24jan03.
 
 
 % Set up the default fonts, so we can use them for creating boxes.
 %
-\textfonts \rm
+\textfonts
 
 % Define these so they can be easily changed for other fonts.
 \def\angleleft{$\langle$}
@@ -1702,7 +1475,7 @@ where each line of input produces a line of output.}
 
 % Fonts for short table of contents.
 \setfont\shortcontrm\rmshape{12}{1000}
-\setfont\shortcontbf\bfshape{10}{\magstep1}  % no cmb12
+\setfont\shortcontbf\bxshape{12}{1000}
 \setfont\shortcontsl\slshape{12}{1000}
 \setfont\shortconttt\ttshape{12}{1000}
 
@@ -1716,27 +1489,15 @@ where each line of input produces a line of output.}
 \def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
 \def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
 
-% like \smartslanted except unconditionally uses \ttsl.
-% @var is set to this for defun arguments.
-\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
-
-% like \smartslanted except unconditionally use \sl.  We never want
-% ttsl for book titles, do we?
-\def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
-
 \let\i=\smartitalic
-\let\slanted=\smartslanted
 \let\var=\smartslanted
 \let\dfn=\smartslanted
 \let\emph=\smartitalic
+\let\cite=\smartslanted
 
-% @b, explicit bold.
 \def\b#1{{\bf #1}}
 \let\strong=\b
 
-% @sansserif, explicit sans.
-\def\sansserif#1{{\sf #1}}
-
 % We can't just use \exhyphenpenalty, because that only has effect at
 % the end of a paragraph.  Restore normal hyphenation at the end of the
 % group within which \nohyphenation is presumably called.
@@ -1759,6 +1520,7 @@ where each line of input produces a line of output.}
   {\tt \rawbackslash \frenchspacing #1}%
   \null
 }
+\let\ttfont=\t
 \def\samp#1{`\tclose{#1}'\null}
 \setfont\keyrm\rmshape{8}{1000}
 \font\keysy=cmsy9
@@ -1799,7 +1561,7 @@ where each line of input produces a line of output.}
   \null
 }
 
-% We *must* turn on hyphenation at `-' and `_' in @code.
+% We *must* turn on hyphenation at `-' and `_' in \code.
 % Otherwise, it is too hard to avoid overfull hboxes
 % in the Emacs manual, the Library manual, etc.
 
@@ -1817,6 +1579,10 @@ where each line of input produces a line of output.}
     \catcode`\_=\active \let_\codeunder
     \codex
   }
+  %
+  % If we end up with any active - characters when handling the index,
+  % just treat them as a normal -.
+  \global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
 }
 
 \def\realdash{-}
@@ -1840,7 +1606,8 @@ where each line of input produces a line of output.}
 % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
 %   `example' (@kbd uses ttsl only inside of @example and friends),
 %   or `code' (@kbd uses normal tty font always).
-\parseargdef\kbdinputstyle{%
+\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
+\def\kbdinputstylexxx#1{%
   \def\arg{#1}%
   \ifx\arg\worddistinct
     \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
@@ -1866,8 +1633,8 @@ where each line of input produces a line of output.}
 \else{\tclose{\kbdfont\look}}\fi
 \else{\tclose{\kbdfont\look}}\fi}
 
-% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
-\let\indicateurl=\code
+% For @url, @env, @command quotes seem unnecessary, so use \code.
+\let\url=\code
 \let\env=\code
 \let\command=\code
 
@@ -1899,10 +1666,6 @@ where each line of input produces a line of output.}
   \endlink
 \endgroup}
 
-% @url synonym for @uref, since that's how everyone uses it.
-%
-\let\url=\uref
-
 % rms does not like angle brackets --karl, 17may97.
 % So now @email is just like @uref, unless we are pdf.
 %
@@ -1944,101 +1707,22 @@ where each line of input produces a line of output.}
 \def\sc#1{{\smallcaps#1}}       % smallcaps font
 \def\ii#1{{\it #1}}             % italic font
 
-% @acronym for "FBI", "NATO", and the like.
-% We print this one point size smaller, since it's intended for
-% all-uppercase.
-% 
-\def\acronym#1{\doacronym #1,,\finish}
-\def\doacronym#1,#2,#3\finish{%
-  {\selectfonts\lsize #1}%
-  \def\temp{#2}%
-  \ifx\temp\empty \else
-    \space ({\unsepspaces \ignorespaces \temp \unskip})%
-  \fi
-}
-
-% @abbr for "Comput. J." and the like.
-% No font change, but don't do end-of-sentence spacing.
-% 
-\def\abbr#1{\doabbr #1,,\finish}
-\def\doabbr#1,#2,#3\finish{%
-  {\frenchspacing #1}%
-  \def\temp{#2}%
-  \ifx\temp\empty \else
-    \space ({\unsepspaces \ignorespaces \temp \unskip})%
-  \fi
-}
+% @acronym downcases the argument and prints in smallcaps.
+\def\acronym#1{{\smallcaps \lowercase{#1}}}
 
-% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
-%
+% @pounds{} is a sterling sign.
 \def\pounds{{\it\$}}
 
-% @euro{} comes from a separate font, depending on the current style.
-% We use the free feym* fonts from the eurosym package by Henrik
-% Theiling, which support regular, slanted, bold and bold slanted (and
-% "outlined" (blackboard board, sort of) versions, which we don't need).
-% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
-% 
-% Although only regular is the truly official Euro symbol, we ignore
-% that.  The Euro is designed to be slightly taller than the regular
-% font height.
-% 
-% feymr - regular
-% feymo - slanted
-% feybr - bold
-% feybo - bold slanted
-% 
-% There is no good (free) typewriter version, to my knowledge.
-% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
-% Hmm.
-% 
-% Also doesn't work in math.  Do we need to do math with euro symbols?
-% Hope not.
-% 
-% 
-\def\euro{{\eurofont e}}
-\def\eurofont{%
-  % We set the font at each command, rather than predefining it in
-  % \textfonts and the other font-switching commands, so that
-  % installations which never need the symbold don't have to have the
-  % font installed.
-  % 
-  % There is only one designed size (nominal 10pt), so we always scale
-  % that to the current nominal size.
-  % 
-  % By the way, simply using "at 1em" works for cmr10 and the like, but
-  % does not work for cmbx10 and other extended/shrunken fonts.
-  % 
-  \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
-  %
-  \ifx\curfontstyle\bfstylename 
-    % bold:
-    \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
-  \else 
-    % regular:
-    \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
-  \fi
-  \thiseurofont
-}
-
-% @registeredsymbol - R in a circle.  The font for the R should really
-% be smaller yet, but lllsize is the best we can do for now.
+% @registeredsymbol - R in a circle.  For now, only works in text size;
+% we'd have to redo the font mechanism to change the \scriptstyle and
+% \scriptscriptstyle font sizes to make it look right in headings.
 % Adapted from the plain.tex definition of \copyright.
 %
 \def\registeredsymbol{%
-  $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
-               \hfil\crcr\Orb}}%
+  $^{{\ooalign{\hfil\raise.07ex\hbox{$\scriptstyle\rm R$}\hfil\crcr\Orb}}%
     }$%
 }
 
-% Laurent Siebenmann reports \Orb undefined with:
-%  Textures 1.7.7 (preloaded format=plain 93.10.14)  (68K)  16 APR 2004 02:38
-% so we'll define it if necessary.
-% 
-\ifx\Orb\undefined
-\def\Orb{\mathhexbox20D}
-\fi
-
 
 \message{page headings,}
 
@@ -2057,103 +1741,87 @@ where each line of input produces a line of output.}
 \newif\ifsetshortcontentsaftertitlepage
  \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
 
-\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+\def\shorttitlepage{\parsearg\shorttitlepagezzz}
+\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
         \endgroup\page\hbox{}\page}
 
-\envdef\titlepage{%
-  % Open one extra group, as we want to close it in the middle of \Etitlepage.
-  \begingroup
-    \parindent=0pt \textfonts
-    % Leave some space at the very top of the page.
-    \vglue\titlepagetopglue
-    % No rule at page bottom unless we print one at the top with @title.
-    \finishedtitlepagetrue
-    %
-    % Most title ``pages'' are actually two pages long, with space
-    % at the top of the second.  We don't want the ragged left on the second.
-    \let\oldpage = \page
-    \def\page{%
+\def\titlepage{\begingroup \parindent=0pt \textfonts
+   \let\subtitlerm=\tenrm
+   \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
+   %
+   \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
+                   \let\tt=\authortt}%
+   %
+   % Leave some space at the very top of the page.
+   \vglue\titlepagetopglue
+   %
+   % Now you can print the title using @title.
+   \def\title{\parsearg\titlezzz}%
+   \def\titlezzz##1{\leftline{\titlefonts\rm ##1}
+                    % print a rule at the page bottom also.
+                    \finishedtitlepagefalse
+                    \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
+   % No rule at page bottom unless we print one at the top with @title.
+   \finishedtitlepagetrue
+   %
+   % Now you can put text using @subtitle.
+   \def\subtitle{\parsearg\subtitlezzz}%
+   \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
+   %
+   % @author should come last, but may come many times.
+   \def\author{\parsearg\authorzzz}%
+   \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
+      {\authorfont \leftline{##1}}}%
+   %
+   % Most title ``pages'' are actually two pages long, with space
+   % at the top of the second.  We don't want the ragged left on the second.
+   \let\oldpage = \page
+   \def\page{%
       \iffinishedtitlepage\else
-	 \finishtitlepage
+         \finishtitlepage
       \fi
+      \oldpage
       \let\page = \oldpage
-      \page
-      \null
-    }%
+      \hbox{}}%
+%   \def\page{\oldpage \hbox{}}
 }
 
 \def\Etitlepage{%
-    \iffinishedtitlepage\else
-	\finishtitlepage
-    \fi
-    % It is important to do the page break before ending the group,
-    % because the headline and footline are only empty inside the group.
-    % If we use the new definition of \page, we always get a blank page
-    % after the title page, which we certainly don't want.
-    \oldpage
-  \endgroup
-  %
-  % Need this before the \...aftertitlepage checks so that if they are
-  % in effect the toc pages will come out with page numbers.
-  \HEADINGSon
-  %
-  % If they want short, they certainly want long too.
-  \ifsetshortcontentsaftertitlepage
-    \shortcontents
-    \contents
-    \global\let\shortcontents = \relax
-    \global\let\contents = \relax
-  \fi
-  %
-  \ifsetcontentsaftertitlepage
-    \contents
-    \global\let\contents = \relax
-    \global\let\shortcontents = \relax
-  \fi
+   \iffinishedtitlepage\else
+      \finishtitlepage
+   \fi
+   % It is important to do the page break before ending the group,
+   % because the headline and footline are only empty inside the group.
+   % If we use the new definition of \page, we always get a blank page
+   % after the title page, which we certainly don't want.
+   \oldpage
+   \endgroup
+   %
+   % Need this before the \...aftertitlepage checks so that if they are
+   % in effect the toc pages will come out with page numbers.
+   \HEADINGSon
+   %
+   % If they want short, they certainly want long too.
+   \ifsetshortcontentsaftertitlepage
+     \shortcontents
+     \contents
+     \global\let\shortcontents = \relax
+     \global\let\contents = \relax
+   \fi
+   %
+   \ifsetcontentsaftertitlepage
+     \contents
+     \global\let\contents = \relax
+     \global\let\shortcontents = \relax
+   \fi
 }
 
 \def\finishtitlepage{%
-  \vskip4pt \hrule height 2pt width \hsize
-  \vskip\titlepagebottomglue
-  \finishedtitlepagetrue
-}
-
-%%% Macros to be used within @titlepage:
-
-\let\subtitlerm=\tenrm
-\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
-
-\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
-		\let\tt=\authortt}
-
-\parseargdef\title{%
-  \checkenv\titlepage
-  \leftline{\titlefonts\rm #1}
-  % print a rule at the page bottom also.
-  \finishedtitlepagefalse
-  \vskip4pt \hrule height 4pt width \hsize \vskip4pt
-}
-
-\parseargdef\subtitle{%
-  \checkenv\titlepage
-  {\subtitlefont \rightline{#1}}%
-}
-
-% @author should come last, but may come many times.
-% It can also be used inside @quotation.
-%
-\parseargdef\author{%
-  \def\temp{\quotation}%
-  \ifx\thisenv\temp
-    \def\quotationauthor{#1}% printed in \Equotation.
-  \else
-    \checkenv\titlepage
-    \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
-    {\authorfont \leftline{#1}}%
-  \fi
+   \vskip4pt \hrule height 2pt width \hsize
+   \vskip\titlepagebottomglue
+   \finishedtitlepagetrue
 }
 
-
 %%% Set up page headings and footings.
 
 \let\thispage=\folio
@@ -2163,7 +1831,7 @@ where each line of input produces a line of output.}
 \newtoks\evenfootline    % footline on even pages
 \newtoks\oddfootline     % footline on odd pages
 
-% Now make TeX use those variables
+% Now make Tex use those variables
 \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
                             \else \the\evenheadline \fi}}
 \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
@@ -2177,27 +1845,32 @@ where each line of input produces a line of output.}
 % @evenfooting @thisfile||
 % @oddfooting ||@thisfile
 
-
 \def\evenheading{\parsearg\evenheadingxxx}
-\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
-\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
+\def\oddheading{\parsearg\oddheadingxxx}
+\def\everyheading{\parsearg\everyheadingxxx}
+
+\def\evenfooting{\parsearg\evenfootingxxx}
+\def\oddfooting{\parsearg\oddfootingxxx}
+\def\everyfooting{\parsearg\everyfootingxxx}
+
+{\catcode`\@=0 %
+
+\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
+\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
 \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
 
-\def\oddheading{\parsearg\oddheadingxxx}
-\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
-\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
+\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
+\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
 \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
 
-\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
+\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
 
-\def\evenfooting{\parsearg\evenfootingxxx}
-\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
-\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
+\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
+\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
 \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
 
-\def\oddfooting{\parsearg\oddfootingxxx}
-\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
-\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
+\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
+\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
   \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
   %
   % Leave some space for the footline.  Hopefully ok to assume
@@ -2206,8 +1879,9 @@ where each line of input produces a line of output.}
   \global\advance\vsize by -\baselineskip
 }
 
-\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
-
+\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
+%
+}% unbind the catcode of @.
 
 % @headings double      turns headings on for double-sided printing.
 % @headings single      turns headings on for single-sided printing.
@@ -2221,7 +1895,7 @@ where each line of input produces a line of output.}
 
 \def\headings #1 {\csname HEADINGS#1\endcsname}
 
-\def\HEADINGSoff{%
+\def\HEADINGSoff{
 \global\evenheadline={\hfil} \global\evenfootline={\hfil}
 \global\oddheadline={\hfil} \global\oddfootline={\hfil}}
 \HEADINGSoff
@@ -2230,7 +1904,7 @@ where each line of input produces a line of output.}
 % chapter name on inside top of right hand pages, document
 % title on inside top of left hand pages, and page numbers on outside top
 % edge of all pages.
-\def\HEADINGSdouble{%
+\def\HEADINGSdouble{
 \global\pageno=1
 \global\evenfootline={\hfil}
 \global\oddfootline={\hfil}
@@ -2242,7 +1916,7 @@ where each line of input produces a line of output.}
 
 % For single-sided printing, chapter title goes across top left of page,
 % page number on top right.
-\def\HEADINGSsingle{%
+\def\HEADINGSsingle{
 \global\pageno=1
 \global\evenfootline={\hfil}
 \global\oddfootline={\hfil}
@@ -2289,11 +1963,12 @@ where each line of input produces a line of output.}
 % @settitle line...  specifies the title of the document, for headings.
 % It generates no output of its own.
 \def\thistitle{\putwordNoTitle}
-\def\settitle{\parsearg{\gdef\thistitle}}
+\def\settitle{\parsearg\settitlezzz}
+\def\settitlezzz #1{\gdef\thistitle{#1}}
 
 
 \message{tables,}
-% Tables -- @table, @ftable, @vtable, @item(x).
+% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
 
 % default indentation of table text
 \newdimen\tableindent \tableindent=.8in
@@ -2305,7 +1980,7 @@ where each line of input produces a line of output.}
 % used internally for \itemindent minus \itemmargin
 \newdimen\itemmax
 
-% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
+% Note @table, @vtable, and @vtable define @item, @itemx, etc., with
 % these defs.
 % They also define \itemindex
 % to index the item name in whatever manner is desired (perhaps none).
@@ -2317,10 +1992,22 @@ where each line of input produces a line of output.}
 \def\internalBitem{\smallbreak \parsearg\itemzzz}
 \def\internalBitemx{\itemxpar \parsearg\itemzzz}
 
+\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
+\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
+
+\def\internalBkitem{\smallbreak \parsearg\kitemzzz}
+\def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
+
+\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
+                 \itemzzz {#1}}
+
+\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
+                 \itemzzz {#1}}
+
 \def\itemzzz #1{\begingroup %
   \advance\hsize by -\rightskip
   \advance\hsize by -\tableindent
-  \setbox0=\hbox{\itemindicate{#1}}%
+  \setbox0=\hbox{\itemfont{#1}}%
   \itemindex{#1}%
   \nobreak % This prevents a break before @itemx.
   %
@@ -2344,13 +2031,17 @@ where each line of input produces a line of output.}
     % \parskip glue -- logically it's part of the @item we just started.
     \nobreak \vskip-\parskip
     %
-    % Stop a page break at the \parskip glue coming up.  However, if
-    % what follows is an environment such as @example, there will be no
-    % \parskip glue; then the negative vskip we just inserted would
-    % cause the example and the item to crash together.  So we use this
-    % bizarre value of 10001 as a signal to \aboveenvbreak to insert
-    % \parskip glue after all.  Section titles are handled this way also.
-    % 
+    % Stop a page break at the \parskip glue coming up.  (Unfortunately
+    % we can't prevent a possible page break at the following
+    % \baselineskip glue.)  However, if what follows is an environment
+    % such as @example, there will be no \parskip glue; then
+    % the negative vskip we just would cause the example and the item to
+    % crash together.  So we use this bizarre value of 10001 as a signal
+    % to \aboveenvbreak to insert \parskip glue after all.
+    % (Possibly there are other commands that could be followed by
+    % @example which need the same treatment, but not section titles; or
+    % maybe section titles are the only special case and they should be
+    % penalty 10001...)
     \penalty 10001
     \endgroup
     \itemxneedsnegativevskipfalse
@@ -2370,72 +2061,81 @@ where each line of input produces a line of output.}
   \fi
 }
 
-\def\item{\errmessage{@item while not in a list environment}}
-\def\itemx{\errmessage{@itemx while not in a list environment}}
+\def\item{\errmessage{@item while not in a table}}
+\def\itemx{\errmessage{@itemx while not in a table}}
+\def\kitem{\errmessage{@kitem while not in a table}}
+\def\kitemx{\errmessage{@kitemx while not in a table}}
+\def\xitem{\errmessage{@xitem while not in a table}}
+\def\xitemx{\errmessage{@xitemx while not in a table}}
+
+% Contains a kludge to get @end[description] to work.
+\def\description{\tablez{\dontindex}{1}{}{}{}{}}
 
 % @table, @ftable, @vtable.
-\envdef\table{%
-  \let\itemindex\gobble
-  \tablecheck{table}%
-}
-\envdef\ftable{%
-  \def\itemindex ##1{\doind {fn}{\code{##1}}}%
-  \tablecheck{ftable}%
-}
-\envdef\vtable{%
-  \def\itemindex ##1{\doind {vr}{\code{##1}}}%
-  \tablecheck{vtable}%
+\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
+{\obeylines\obeyspaces%
+\gdef\tablex #1^^M{%
+\tabley\dontindex#1        \endtabley}}
+
+\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
+{\obeylines\obeyspaces%
+\gdef\ftablex #1^^M{%
+\tabley\fnitemindex#1        \endtabley
+\def\Eftable{\endgraf\afterenvbreak\endgroup}%
+\let\Etable=\relax}}
+
+\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
+{\obeylines\obeyspaces%
+\gdef\vtablex #1^^M{%
+\tabley\vritemindex#1        \endtabley
+\def\Evtable{\endgraf\afterenvbreak\endgroup}%
+\let\Etable=\relax}}
+
+\def\dontindex #1{}
+\def\fnitemindex #1{\doind {fn}{\code{#1}}}%
+\def\vritemindex #1{\doind {vr}{\code{#1}}}%
+
+{\obeyspaces %
+\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
+\tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
+
+\def\tablez #1#2#3#4#5#6{%
+\aboveenvbreak %
+\begingroup %
+\def\Edescription{\Etable}% Necessary kludge.
+\let\itemindex=#1%
+\ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
+\ifnum 0#4>0 \tableindent=#4\mil \fi %
+\ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
+\def\itemfont{#2}%
+\itemmax=\tableindent %
+\advance \itemmax by -\itemmargin %
+\advance \leftskip by \tableindent %
+\exdentamount=\tableindent
+\parindent = 0pt
+\parskip = \smallskipamount
+\ifdim \parskip=0pt \parskip=2pt \fi%
+\def\Etable{\endgraf\afterenvbreak\endgroup}%
+\let\item = \internalBitem %
+\let\itemx = \internalBitemx %
+\let\kitem = \internalBkitem %
+\let\kitemx = \internalBkitemx %
+\let\xitem = \internalBxitem %
+\let\xitemx = \internalBxitemx %
 }
-\def\tablecheck#1{%
-  \ifnum \the\catcode`\^^M=\active
-    \endgroup
-    \errmessage{This command won't work in this context; perhaps the problem is
-      that we are \inenvironment\thisenv}%
-    \def\next{\doignore{#1}}%
-  \else
-    \let\next\tablex
-  \fi
-  \next
-}
-\def\tablex#1{%
-  \def\itemindicate{#1}%
-  \parsearg\tabley
-}
-\def\tabley#1{%
-  {%
-    \makevalueexpandable
-    \edef\temp{\noexpand\tablez #1\space\space\space}%
-    \expandafter
-  }\temp \endtablez
-}
-\def\tablez #1 #2 #3 #4\endtablez{%
-  \aboveenvbreak
-  \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
-  \ifnum 0#2>0 \tableindent=#2\mil \fi
-  \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
-  \itemmax=\tableindent
-  \advance \itemmax by -\itemmargin
-  \advance \leftskip by \tableindent
-  \exdentamount=\tableindent
-  \parindent = 0pt
-  \parskip = \smallskipamount
-  \ifdim \parskip=0pt \parskip=2pt \fi
-  \let\item = \internalBitem
-  \let\itemx = \internalBitemx
-}
-\def\Etable{\endgraf\afterenvbreak}
-\let\Eftable\Etable
-\let\Evtable\Etable
-\let\Eitemize\Etable
-\let\Eenumerate\Etable
 
 % This is the counter used by @enumerate, which is really @itemize
 
 \newcount \itemno
 
-\envdef\itemize{\parsearg\doitemize}
+\def\itemize{\parsearg\itemizezzz}
+
+\def\itemizezzz #1{%
+  \begingroup % ended by the @end itemize
+  \itemizey {#1}{\Eitemize}
+}
 
-\def\doitemize#1{%
+\def\itemizey#1#2{%
   \aboveenvbreak
   \itemmax=\itemindent
   \advance\itemmax by -\itemmargin
@@ -2444,33 +2144,13 @@ where each line of input produces a line of output.}
   \parindent=0pt
   \parskip=\smallskipamount
   \ifdim\parskip=0pt \parskip=2pt \fi
+  \def#2{\endgraf\afterenvbreak\endgroup}%
   \def\itemcontents{#1}%
   % @itemize with no arg is equivalent to @itemize @bullet.
   \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
   \let\item=\itemizeitem
 }
 
-% Definition of @item while inside @itemize and @enumerate.
-%
-\def\itemizeitem{%
-  \advance\itemno by 1  % for enumerations
-  {\let\par=\endgraf \smallbreak}% reasonable place to break
-  {%
-   % If the document has an @itemize directly after a section title, a
-   % \nobreak will be last on the list, and \sectionheading will have
-   % done a \vskip-\parskip.  In that case, we don't want to zero
-   % parskip, or the item text will crash with the heading.  On the
-   % other hand, when there is normal text preceding the item (as there
-   % usually is), we do want to zero parskip, or there would be too much
-   % space.  In that case, we won't have a \nobreak before.  At least
-   % that's the theory.
-   \ifnum\lastpenalty<10000 \parskip=0in \fi
-   \noindent
-   \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
-   \vadjust{\penalty 1200}}% not good to break after first line of item.
-  \flushcr
-}
-
 % \splitoff TOKENS\endmark defines \first to be the first token in
 % TOKENS, and \rest to be the remainder.
 %
@@ -2480,8 +2160,11 @@ where each line of input produces a line of output.}
 % or number, to specify the first label in the enumerated list.  No
 % argument is the same as `1'.
 %
-\envparseargdef\enumerate{\enumeratey #1  \endenumeratey}
+\def\enumerate{\parsearg\enumeratezzz}
+\def\enumeratezzz #1{\enumeratey #1  \endenumeratey}
 \def\enumeratey #1 #2\endenumeratey{%
+  \begingroup % ended by the @end enumerate
+  %
   % If we were given no argument, pretend we were given `1'.
   \def\thearg{#1}%
   \ifx\thearg\empty \def\thearg{1}\fi
@@ -2552,13 +2235,13 @@ where each line of input produces a line of output.}
   }%
 }
 
-% Call \doitemize, adding a period to the first argument and supplying the
+% Call itemizey, adding a period to the first argument and supplying the
 % common last two arguments.  Also subtract one from the initial value in
 % \itemno, since @item increments \itemno.
 %
 \def\startenumeration#1{%
   \advance\itemno by -1
-  \doitemize{#1.}\flushcr
+  \itemizey{#1.}\Eenumerate\flushcr
 }
 
 % @alphaenumerate and @capsenumerate are abbreviations for giving an arg
@@ -2569,6 +2252,16 @@ where each line of input produces a line of output.}
 \def\Ealphaenumerate{\Eenumerate}
 \def\Ecapsenumerate{\Eenumerate}
 
+% Definition of @item while inside @itemize.
+
+\def\itemizeitem{%
+\advance\itemno by 1
+{\let\par=\endgraf \smallbreak}%
+\ifhmode \errmessage{In hmode at itemizeitem}\fi
+{\parskip=0in \hskip 0pt
+\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
+\vadjust{\penalty 1200}}%
+\flushcr}
 
 % @multitable macros
 % Amy Hendrickson, 8/18/94, 3/6/96
@@ -2595,14 +2288,24 @@ where each line of input produces a line of output.}
 %   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
 %   @item ...
 %   using the widest term desired in each column.
+%
+% For those who want to use more than one line's worth of words in
+% the preamble, break the line within one argument and it
+% will parse correctly, i.e.,
+%
+%     @multitable {Column 1 template} {Column 2 template} {Column 3
+%      template}
+% Not:
+%     @multitable {Column 1 template} {Column 2 template}
+%      {Column 3 template}
 
 % Each new table line starts with @item, each subsequent new column
 % starts with @tab. Empty columns may be produced by supplying @tab's
 % with nothing between them for as many times as empty columns are needed,
 % ie, @tab@tab@tab will produce two empty columns.
 
-% @item, @tab do not need to be on their own lines, but it will not hurt
-% if they are.
+% @item, @tab, @multitable or @end multitable do not need to be on their
+% own lines, but it will not hurt if they are.
 
 % Sample multitable:
 
@@ -2646,12 +2349,13 @@ where each line of input produces a line of output.}
 \def\xcolumnfractions{\columnfractions}
 \newif\ifsetpercent
 
-% #1 is the @columnfraction, usually a decimal number like .5, but might
-% be just 1.  We just use it, whatever it is.
-%
-\def\pickupwholefraction#1 {%
+% #1 is the part of the @columnfraction before the decimal point, which
+% is presumably either 0 or the empty string (but we don't check, we
+% just throw it away).  #2 is the decimal part, which we use as the
+% percent of \hsize for this column.
+\def\pickupwholefraction#1.#2 {%
   \global\advance\colcount by 1
-  \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
+  \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
   \setuptable
 }
 
@@ -2684,33 +2388,18 @@ where each line of input produces a line of output.}
   \go
 }
 
-% multitable-only commands.
-%
-% @headitem starts a heading row, which we typeset in bold.
-% Assignments have to be global since we are inside the implicit group
-% of an alignment entry.  Note that \everycr resets \everytab.
-\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}%
-%
-% A \tab used to include \hskip1sp.  But then the space in a template
-% line is not enough.  That is bad.  So let's go back to just `&' until
-% we encounter the problem it was intended to solve again.
-%					--karl, nathan@acm.org, 20apr99.
-\def\tab{\checkenv\multitable &\the\everytab}%
-
 % @multitable ... @end multitable definitions:
 %
-\newtoks\everytab  % insert after every tab.
-%
-\envdef\multitable{%
+\def\multitable{\parsearg\dotable}
+\def\dotable#1{\bgroup
   \vskip\parskip
-  \startsavinginserts
-  %
-  % @item within a multitable starts a normal row.
-  % We use \def instead of \let so that if one of the multitable entries
-  % contains an @itemize, we don't choke on the \item (seen as \crcr aka
-  % \endtemplate) expanding \doitemize.
-  \def\item{\crcr}%
-  %
+  \let\item=\crcrwithfootnotes
+  % A \tab used to include \hskip1sp.  But then the space in a template
+  % line is not enough.  That is bad.  So let's go back to just & until
+  % we encounter the problem it was intended to solve again.  --karl,
+  % nathan@acm.org, 20apr99.
+  \let\tab=&%
+  \let\startfootins=\startsavedfootnote
   \tolerance=9500
   \hbadness=9500
   \setmultitablespacing
@@ -2718,93 +2407,85 @@ where each line of input produces a line of output.}
   \parindent=\multitableparindent
   \overfullrule=0pt
   \global\colcount=0
-  %
-  \everycr = {%
-    \noalign{%
-      \global\everytab={}%
-      \global\colcount=0 % Reset the column counter.
-      % Check for saved footnotes, etc.
-      \checkinserts
-      % Keeps underfull box messages off when table breaks over pages.
-      %\filbreak
-	% Maybe so, but it also creates really weird page breaks when the
-	% table breaks over pages. Wouldn't \vfil be better?  Wait until the
-	% problem manifests itself, so it can be fixed for real --karl.
-    }%
+  \def\Emultitable{%
+    \global\setpercentfalse
+    \crcrwithfootnotes\crcr
+    \egroup\egroup
   }%
   %
-  \parsearg\domultitable
-}
-\def\domultitable#1{%
   % To parse everything between @multitable and @item:
   \setuptable#1 \endsetuptable
   %
+  % \everycr will reset column counter, \colcount, at the end of
+  % each line. Every column entry will cause \colcount to advance by one.
+  % The table preamble
+  % looks at the current \colcount to find the correct column width.
+  \everycr{\noalign{%
+  %
+  % \filbreak%% keeps underfull box messages off when table breaks over pages.
+  % Maybe so, but it also creates really weird page breaks when the table
+  % breaks over pages. Wouldn't \vfil be better?  Wait until the problem
+  % manifests itself, so it can be fixed for real --karl.
+    \global\colcount=0\relax}}%
+  %
   % This preamble sets up a generic column definition, which will
   % be used as many times as user calls for columns.
   % \vtop will set a single line and will also let text wrap and
   % continue for many paragraphs if desired.
-  \halign\bgroup &%
-    \global\advance\colcount by 1
-    \multistrut
-    \vtop{%
-      % Use the current \colcount to find the correct column width:
-      \hsize=\expandafter\csname col\the\colcount\endcsname
-      %
-      % In order to keep entries from bumping into each other
-      % we will add a \leftskip of \multitablecolspace to all columns after
-      % the first one.
-      %
-      % If a template has been used, we will add \multitablecolspace
-      % to the width of each template entry.
-      %
-      % If the user has set preamble in terms of percent of \hsize we will
-      % use that dimension as the width of the column, and the \leftskip
-      % will keep entries from bumping into each other.  Table will start at
-      % left margin and final column will justify at right margin.
-      %
-      % Make sure we don't inherit \rightskip from the outer environment.
-      \rightskip=0pt
-      \ifnum\colcount=1
-	% The first column will be indented with the surrounding text.
-	\advance\hsize by\leftskip
-      \else
-	\ifsetpercent \else
-	  % If user has not set preamble in terms of percent of \hsize
-	  % we will advance \hsize by \multitablecolspace.
-	  \advance\hsize by \multitablecolspace
-	\fi
-       % In either case we will make \leftskip=\multitablecolspace:
-      \leftskip=\multitablecolspace
-      \fi
-      % Ignoring space at the beginning and end avoids an occasional spurious
-      % blank line, when TeX decides to break the line at the space before the
-      % box from the multistrut, so the strut ends up on a line by itself.
-      % For example:
-      % @multitable @columnfractions .11 .89
-      % @item @code{#}
-      % @tab Legal holiday which is valid in major parts of the whole country.
-      % Is automatically provided with highlighting sequences respectively
-      % marking characters.
-      \noindent\ignorespaces##\unskip\multistrut
-    }\cr
-}
-\def\Emultitable{%
-  \crcr
-  \egroup % end the \halign
-  \global\setpercentfalse
-}
-
-\def\setmultitablespacing{%
-  \def\multistrut{\strut}% just use the standard line spacing
-  %
-  % Compute \multitablelinespace (if not defined by user) for use in
-  % \multitableparskip calculation.  We used define \multistrut based on
-  % this, but (ironically) that caused the spacing to be off.
-  % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
+  \halign\bgroup&\global\advance\colcount by 1\relax
+    \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
+  %
+  % In order to keep entries from bumping into each other
+  % we will add a \leftskip of \multitablecolspace to all columns after
+  % the first one.
+  %
+  % If a template has been used, we will add \multitablecolspace
+  % to the width of each template entry.
+  %
+  % If the user has set preamble in terms of percent of \hsize we will
+  % use that dimension as the width of the column, and the \leftskip
+  % will keep entries from bumping into each other.  Table will start at
+  % left margin and final column will justify at right margin.
+  %
+  % Make sure we don't inherit \rightskip from the outer environment.
+  \rightskip=0pt
+  \ifnum\colcount=1
+    % The first column will be indented with the surrounding text.
+    \advance\hsize by\leftskip
+  \else
+    \ifsetpercent \else
+      % If user has not set preamble in terms of percent of \hsize
+      % we will advance \hsize by \multitablecolspace.
+      \advance\hsize by \multitablecolspace
+    \fi
+   % In either case we will make \leftskip=\multitablecolspace:
+  \leftskip=\multitablecolspace
+  \fi
+  % Ignoring space at the beginning and end avoids an occasional spurious
+  % blank line, when TeX decides to break the line at the space before the
+  % box from the multistrut, so the strut ends up on a line by itself.
+  % For example:
+  % @multitable @columnfractions .11 .89
+  % @item @code{#}
+  % @tab Legal holiday which is valid in major parts of the whole country.
+  % Is automatically provided with highlighting sequences respectively marking
+  % characters.
+  \noindent\ignorespaces##\unskip\multistrut}\cr
+}
+
+\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
+% If so, do nothing. If not, give it an appropriate dimension based on
+% current baselineskip.
 \ifdim\multitablelinespace=0pt
 \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
 \global\advance\multitablelinespace by-\ht0
-\fi
+%% strut to put in table in case some entry doesn't have descenders,
+%% to keep lines equally spaced
+\let\multistrut = \strut
+\else
+%% FIXME: what is \box0 supposed to be?
+\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
+width0pt\relax} \fi
 %% Test to see if parskip is larger than space between lines of
 %% table. If not, do nothing.
 %%        If so, set to same dimension as multitablelinespace.
@@ -2819,33 +2500,163 @@ where each line of input produces a line of output.}
                                       %% than skip between lines in the table.
 \fi}
 
+% In case a @footnote appears inside an alignment, save the footnote
+% text to a box and make the \insert when a row of the table is
+% finished.  Otherwise, the insertion is lost, it never migrates to the
+% main vertical list.  --kasal, 22jan03.
+%
+\newbox\savedfootnotes
+%
+% \dotable \let's \startfootins to this, so that \dofootnote will call
+% it instead of starting the insertion right away.
+\def\startsavedfootnote{%
+  \global\setbox\savedfootnotes = \vbox\bgroup
+    \unvbox\savedfootnotes
+}
+\def\crcrwithfootnotes{%
+  \crcr
+  \ifvoid\savedfootnotes \else
+    \noalign{\insert\footins{\box\savedfootnotes}}%
+  \fi
+}
 
 \message{conditionals,}
-
-% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
-% @ifnotxml always succeed.  They currently do nothing; we don't
-% attempt to check whether the conditionals are properly nested.  But we
-% have to remember that they are conditionals, so that @end doesn't
-% attempt to close an environment group.
-%
-\def\makecond#1{%
-  \expandafter\let\csname #1\endcsname = \relax
-  \expandafter\let\csname iscond.#1\endcsname = 1
+% Prevent errors for section commands.
+% Used in @ignore and in failing conditionals.
+\def\ignoresections{%
+  \let\chapter=\relax
+  \let\unnumbered=\relax
+  \let\top=\relax
+  \let\unnumberedsec=\relax
+  \let\unnumberedsection=\relax
+  \let\unnumberedsubsec=\relax
+  \let\unnumberedsubsection=\relax
+  \let\unnumberedsubsubsec=\relax
+  \let\unnumberedsubsubsection=\relax
+  \let\section=\relax
+  \let\subsec=\relax
+  \let\subsubsec=\relax
+  \let\subsection=\relax
+  \let\subsubsection=\relax
+  \let\appendix=\relax
+  \let\appendixsec=\relax
+  \let\appendixsection=\relax
+  \let\appendixsubsec=\relax
+  \let\appendixsubsection=\relax
+  \let\appendixsubsubsec=\relax
+  \let\appendixsubsubsection=\relax
+  \let\contents=\relax
+  \let\smallbook=\relax
+  \let\titlepage=\relax
+}
+
+% Used in nested conditionals, where we have to parse the Texinfo source
+% and so want to turn off most commands, in case they are used
+% incorrectly.
+%
+% We use \empty instead of \relax for the @def... commands, so that \end
+% doesn't throw an error.  For instance:
+% @ignore
+% @deffn ...
+% @end deffn
+% @end ignore
+%
+% The @end deffn is going to get expanded, because we're trying to allow
+% nested conditionals.  But we don't want to expand the actual @deffn,
+% since it might be syntactically correct and intended to be ignored.
+% Since \end checks for \relax, using \empty does not cause an error.
+%
+\def\ignoremorecommands{%
+  \let\defcodeindex = \relax
+  \let\defcv = \empty
+  \let\defcvx = \empty
+  \let\Edefcv = \empty
+  \let\deffn = \empty
+  \let\deffnx = \empty
+  \let\Edeffn = \empty
+  \let\defindex = \relax
+  \let\defivar = \empty
+  \let\defivarx = \empty
+  \let\Edefivar = \empty
+  \let\defmac = \empty
+  \let\defmacx = \empty
+  \let\Edefmac = \empty
+  \let\defmethod = \empty
+  \let\defmethodx = \empty
+  \let\Edefmethod = \empty
+  \let\defop = \empty
+  \let\defopx = \empty
+  \let\Edefop = \empty
+  \let\defopt = \empty
+  \let\defoptx = \empty
+  \let\Edefopt = \empty
+  \let\defspec = \empty
+  \let\defspecx = \empty
+  \let\Edefspec = \empty
+  \let\deftp = \empty
+  \let\deftpx = \empty
+  \let\Edeftp = \empty
+  \let\deftypefn = \empty
+  \let\deftypefnx = \empty
+  \let\Edeftypefn = \empty
+  \let\deftypefun = \empty
+  \let\deftypefunx = \empty
+  \let\Edeftypefun = \empty
+  \let\deftypeivar = \empty
+  \let\deftypeivarx = \empty
+  \let\Edeftypeivar = \empty
+  \let\deftypemethod = \empty
+  \let\deftypemethodx = \empty
+  \let\Edeftypemethod = \empty
+  \let\deftypeop = \empty
+  \let\deftypeopx = \empty
+  \let\Edeftypeop = \empty
+  \let\deftypevar = \empty
+  \let\deftypevarx = \empty
+  \let\Edeftypevar = \empty
+  \let\deftypevr = \empty
+  \let\deftypevrx = \empty
+  \let\Edeftypevr = \empty
+  \let\defun = \empty
+  \let\defunx = \empty
+  \let\Edefun = \empty
+  \let\defvar = \empty
+  \let\defvarx = \empty
+  \let\Edefvar = \empty
+  \let\defvr = \empty
+  \let\defvrx = \empty
+  \let\Edefvr = \empty
+  \let\clear = \relax
+  \let\down = \relax
+  \let\evenfooting = \relax
+  \let\evenheading = \relax
+  \let\everyfooting = \relax
+  \let\everyheading = \relax
+  \let\headings = \relax
+  \let\include = \relax
+  \let\item = \relax
+  \let\lowersections = \relax
+  \let\oddfooting = \relax
+  \let\oddheading = \relax
+  \let\printindex = \relax
+  \let\pxref = \relax
+  \let\raisesections = \relax
+  \let\ref = \relax
+  \let\set = \relax
+  \let\setchapternewpage = \relax
+  \let\setchapterstyle = \relax
+  \let\settitle = \relax
+  \let\up = \relax
+  \let\verbatiminclude = \relax
+  \let\xref = \relax
 }
-\makecond{iftex}
-\makecond{ifnotdocbook}
-\makecond{ifnothtml}
-\makecond{ifnotinfo}
-\makecond{ifnotplaintext}
-\makecond{ifnotxml}
 
 % Ignore @ignore, @ifhtml, @ifinfo, and the like.
 %
 \def\direntry{\doignore{direntry}}
+\def\documentdescriptionword{documentdescription}
 \def\documentdescription{\doignore{documentdescription}}
-\def\docbook{\doignore{docbook}}
 \def\html{\doignore{html}}
-\def\ifdocbook{\doignore{ifdocbook}}
 \def\ifhtml{\doignore{ifhtml}}
 \def\ifinfo{\doignore{ifinfo}}
 \def\ifnottex{\doignore{ifnottex}}
@@ -2855,133 +2666,198 @@ where each line of input produces a line of output.}
 \def\menu{\doignore{menu}}
 \def\xml{\doignore{xml}}
 
-% Ignore text until a line `@end #1', keeping track of nested conditionals.
-%
-% A count to remember the depth of nesting.
-\newcount\doignorecount
+% @dircategory CATEGORY  -- specify a category of the dir file
+% which this file should belong to.  Ignore this in TeX.
+\let\dircategory = \comment
 
+% Ignore text until a line `@end #1'.
+%
 \def\doignore#1{\begingroup
-  % Scan in ``verbatim'' mode:
-  \catcode`\@ = \other
-  \catcode`\{ = \other
-  \catcode`\} = \other
+  % Don't complain about control sequences we have declared \outer.
+  \ignoresections
+  %
+  % Define a command to swallow text until we reach `@end #1'.
+  % This @ is a catcode 12 token (that is the normal catcode of @ in
+  % this texinfo.tex file).  We change the catcode of @ below to match.
+  \long\def\doignoretext##1@end #1{\enddoignore}%
   %
   % Make sure that spaces turn into tokens that match what \doignoretext wants.
-  \spaceisspace
+  \catcode\spaceChar = 10
   %
-  % Count number of #1's that we've seen.
-  \doignorecount = 0
+  % Ignore braces, too, so mismatched braces don't cause trouble.
+  \catcode`\{ = 9
+  \catcode`\} = 9
   %
-  % Swallow text until we reach the matching `@end #1'.
-  \dodoignore{#1}%
-}
-
-{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
-  \obeylines %
+  % We must not have @c interpreted as a control sequence.
+  \catcode`\@ = 12
   %
-  \gdef\dodoignore#1{%
-    % #1 contains the command name as a string, e.g., `ifinfo'.
-    %
-    % Define a command to find the next `@end #1', which must be on a line
-    % by itself.
-    \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}%
-    % And this command to find another #1 command, at the beginning of a
-    % line.  (Otherwise, we would consider a line `@c @ifset', for
-    % example, to count as an @ifset for nesting.)
-    \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
-    %
-    % And now expand that command.
-    \obeylines %
-    \doignoretext ^^M%
-  }%
-}
-
-\def\doignoreyyy#1{%
-  \def\temp{#1}%
-  \ifx\temp\empty			% Nothing found.
-    \let\next\doignoretextzzz
-  \else					% Found a nested condition, ...
-    \advance\doignorecount by 1
-    \let\next\doignoretextyyy		% ..., look for another.
-    % If we're here, #1 ends with ^^M\ifinfo (for example).
+  \def\ignoreword{#1}%
+  \ifx\ignoreword\documentdescriptionword
+    % The c kludge breaks documentdescription, since
+    % `documentdescription' contains a `c'.  Means not everything will
+    % be ignored inside @documentdescription, but oh well...
+  \else
+    % Make the letter c a comment character so that the rest of the line
+    % will be ignored. This way, the document can have (for example)
+    %   @c @end ifinfo
+    % and the @end ifinfo will be properly ignored.
+    % (We've just changed @ to catcode 12.)
+    \catcode`\c = 14
   \fi
-  \next #1% the token \_STOP_ is present just after this macro.
+  %
+  % And now expand the command defined above.
+  \doignoretext
+}
+
+% What we do to finish off ignored text.
+%
+\def\enddoignore{\endgroup\ignorespaces}%
+
+\newif\ifwarnedobs\warnedobsfalse
+\def\obstexwarn{%
+  \ifwarnedobs\relax\else
+  % We need to warn folks that they may have trouble with TeX 3.0.
+  % This uses \immediate\write16 rather than \message to get newlines.
+    \immediate\write16{}
+    \immediate\write16{WARNING: for users of Unix TeX 3.0!}
+    \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
+    \immediate\write16{If you are running another version of TeX, relax.}
+    \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
+    \immediate\write16{  Then upgrade your TeX installation if you can.}
+    \immediate\write16{  (See ftp://ftp.gnu.org/non-gnu/TeX.README.)}
+    \immediate\write16{If you are stuck with version 3.0, run the}
+    \immediate\write16{  script ``tex3patch'' from the Texinfo distribution}
+    \immediate\write16{  to use a workaround.}
+    \immediate\write16{}
+    \global\warnedobstrue
+    \fi
 }
 
-% We have to swallow the remaining "\_STOP_".
+% **In TeX 3.0, setting text in \nullfont hangs tex.  For a
+% workaround (which requires the file ``dummy.tfm'' to be installed),
+% uncomment the following line:
+%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
+
+% Ignore text, except that we keep track of conditional commands for
+% purposes of nesting, up to an `@end #1' command.
 %
-\def\doignoretextzzz#1{%
-  \ifnum\doignorecount = 0	% We have just found the outermost @end.
-    \let\next\enddoignore
-  \else				% Still inside a nested condition.
-    \advance\doignorecount by -1
-    \let\next\doignoretext      % Look for the next @end.
-  \fi
-  \next
+\def\nestedignore#1{%
+  \obstexwarn
+  % We must actually expand the ignored text to look for the @end
+  % command, so that nested ignore constructs work.  Thus, we put the
+  % text into a \vbox and then do nothing with the result.  To minimize
+  % the chance of memory overflow, we follow the approach outlined on
+  % page 401 of the TeXbook.
+  %
+  \setbox0 = \vbox\bgroup
+    % Don't complain about control sequences we have declared \outer.
+    \ignoresections
+    %
+    % Define `@end #1' to end the box, which will in turn undefine the
+    % @end command again.
+    \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
+    %
+    % We are going to be parsing Texinfo commands.  Most cause no
+    % trouble when they are used incorrectly, but some commands do
+    % complicated argument parsing or otherwise get confused, so we
+    % undefine them.
+    %
+    % We can't do anything about stray @-signs, unfortunately;
+    % they'll produce `undefined control sequence' errors.
+    \ignoremorecommands
+    %
+    % Set the current font to be \nullfont, a TeX primitive, and define
+    % all the font commands to also use \nullfont.  We don't use
+    % dummy.tfm, as suggested in the TeXbook, because some sites
+    % might not have that installed.  Therefore, math mode will still
+    % produce output, but that should be an extremely small amount of
+    % stuff compared to the main input.
+    %
+    \nullfont
+    \let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont
+    \let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont
+    \let\tensf=\nullfont
+    % Similarly for index fonts.
+    \let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont
+    \let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont
+    \let\smallsf=\nullfont
+    % Similarly for smallexample fonts.
+    \let\smallerrm=\nullfont \let\smallerit=\nullfont \let\smallersl=\nullfont
+    \let\smallerbf=\nullfont \let\smallertt=\nullfont \let\smallersc=\nullfont
+    \let\smallersf=\nullfont
+    %
+    % Don't complain when characters are missing from the fonts.
+    \tracinglostchars = 0
+    %
+    % Don't bother to do space factor calculations.
+    \frenchspacing
+    %
+    % Don't report underfull hboxes.
+    \hbadness = 10000
+    %
+    % Do minimal line-breaking.
+    \pretolerance = 10000
+    %
+    % Do not execute instructions in @tex.
+    \def\tex{\doignore{tex}}%
+    % Do not execute macro definitions.
+    % `c' is a comment character, so the word `macro' will get cut off.
+    \def\macro{\doignore{ma}}%
 }
 
-% Finish off ignored text.
-\def\enddoignore{\endgroup\ignorespaces}
-
-
 % @set VAR sets the variable VAR to an empty value.
 % @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
 %
 % Since we want to separate VAR from REST-OF-LINE (which might be
 % empty), we can't just use \parsearg; we have to insert a space of our
 % own to delimit the rest of the line, and then take it out again if we
-% didn't need it.
-% We rely on the fact that \parsearg sets \catcode`\ =10.
+% didn't need it.  Make sure the catcode of space is correct to avoid
+% losing inside @example, for instance.
 %
-\parseargdef\set{\setyyy#1 \endsetyyy}
+\def\set{\begingroup\catcode` =10
+  \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
+  \parsearg\setxxx}
+\def\setxxx#1{\setyyy#1 \endsetyyy}
 \def\setyyy#1 #2\endsetyyy{%
-  {%
-    \makevalueexpandable
-    \def\temp{#2}%
-    \edef\next{\gdef\makecsname{SET#1}}%
-    \ifx\temp\empty
-      \next{}%
-    \else
-      \setzzz#2\endsetzzz
-    \fi
-  }%
+  \def\temp{#2}%
+  \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
+  \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
+  \fi
+  \endgroup
 }
-% Remove the trailing space \setxxx inserted.
-\def\setzzz#1 \endsetzzz{\next{#1}}
+% Can't use \xdef to pre-expand #2 and save some time, since \temp or
+% \next or other control sequences that we've defined might get us into
+% an infinite loop. Consider `@set foo @cite{bar}'.
+\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
 
 % @clear VAR clears (i.e., unsets) the variable VAR.
 %
-\parseargdef\clear{%
-  {%
-    \makevalueexpandable
-    \global\expandafter\let\csname SET#1\endcsname=\relax
-  }%
-}
+\def\clear{\parsearg\clearxxx}
+\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
 
 % @value{foo} gets the text saved in variable foo.
-\def\value{\begingroup\makevalueexpandable\valuexxx}
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
 {
-  \catcode`\- = \active \catcode`\_ = \active
+  \catcode`\_ = \active
   %
-  \gdef\makevalueexpandable{%
-    \let\value = \expandablevalue
-    % We don't want these characters active, ...
+  % We might end up with active _ or - characters in the argument if
+  % we're called from @code, as @code{@value{foo-bar_}}.  So \let any
+  % such active characters to their normal equivalents.
+  \gdef\value{\begingroup
     \catcode`\-=\other \catcode`\_=\other
-    % ..., but we might end up with active ones in the argument if
-    % we're called from @code, as @code{@value{foo-bar_}}, though.
-    % So \let them to their normal equivalents.
-    \let-\realdash \let_\normalunderscore
-  }
+    \indexbreaks \let_\normalunderscore
+    \valuexxx}
 }
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
 
 % We have this subroutine so that we can handle at least some @value's
-% properly in indexes (we call \makevalueexpandable in \indexdummies).
-% The command has to be fully expandable (if the variable is set), since
-% the result winds up in the index file.  This means that if the
-% variable's value contains other Texinfo commands, it's almost certain
-% it will fail (although perhaps we could fix that with sufficient work
-% to do a one-level expansion on the result, instead of complete).
+% properly in indexes (we \let\value to this in \indexdummies).  Ones
+% whose names contain - or _ still won't work, but we can't do anything
+% about that.  The command has to be fully expandable (if the variable
+% is set), since the result winds up in the index file.  This means that
+% if the variable's value contains other Texinfo commands, it's almost
+% certain it will fail (although perhaps we could fix that with
+% sufficient work to do a one-level expansion on the result, instead of
+% complete).
 %
 \def\expandablevalue#1{%
   \expandafter\ifx\csname SET#1\endcsname\relax
@@ -2995,36 +2871,55 @@ where each line of input produces a line of output.}
 % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
 % with @set.
 %
-% To get special treatment of `@end ifset,' call \makeond and the redefine.
-%
-\makecond{ifset}
-\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
-\def\doifset#1#2{%
-  {%
-    \makevalueexpandable
-    \let\next=\empty
-    \expandafter\ifx\csname SET#2\endcsname\relax
-      #1% If not set, redefine \next.
-    \fi
-    \expandafter
-  }\next
+\def\ifset{\parsearg\doifset}
+\def\doifset#1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    \let\next=\ifsetfail
+  \else
+    \let\next=\ifsetsucceed
+  \fi
+  \next
 }
-\def\ifsetfail{\doignore{ifset}}
+\def\ifsetsucceed{\conditionalsucceed{ifset}}
+\def\ifsetfail{\nestedignore{ifset}}
+\defineunmatchedend{ifset}
 
 % @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
 % defined with @set, or has been undefined with @clear.
 %
-% The `\else' inside the `\doifset' parameter is a trick to reuse the
-% above code: if the variable is not set, do nothing, if it is set,
-% then redefine \next to \ifclearfail.
+\def\ifclear{\parsearg\doifclear}
+\def\doifclear#1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    \let\next=\ifclearsucceed
+  \else
+    \let\next=\ifclearfail
+  \fi
+  \next
+}
+\def\ifclearsucceed{\conditionalsucceed{ifclear}}
+\def\ifclearfail{\nestedignore{ifclear}}
+\defineunmatchedend{ifclear}
+
+% @iftex, @ifnothtml, @ifnotinfo, @ifnotplaintext always succeed; we
+% read the text following, through the first @end iftex (etc.).  Make
+% `@end iftex' (etc.) valid only after an @iftex.
 %
-\makecond{ifclear}
-\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
-\def\ifclearfail{\doignore{ifclear}}
+\def\iftex{\conditionalsucceed{iftex}}
+\def\ifnothtml{\conditionalsucceed{ifnothtml}}
+\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
+\def\ifnotplaintext{\conditionalsucceed{ifnotplaintext}}
+\defineunmatchedend{iftex}
+\defineunmatchedend{ifnothtml}
+\defineunmatchedend{ifnotinfo}
+\defineunmatchedend{ifnotplaintext}
 
-% @dircategory CATEGORY  -- specify a category of the dir file
-% which this file should belong to.  Ignore this in TeX.
-\let\dircategory=\comment
+% True conditional.  Since \set globally defines its variables, we can
+% just start and end a group (to keep the @end definition undefined at
+% the outer level).
+%
+\def\conditionalsucceed#1{\begingroup
+  \expandafter\def\csname E#1\endcsname{\endgroup}%
+}
 
 % @defininfoenclose.
 \let\definfoenclose=\comment
@@ -3034,8 +2929,9 @@ where each line of input produces a line of output.}
 % Index generation facilities
 
 % Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within macros and \if's.
-\edef\newwrite{\makecsname{ptexnewwrite}}
+% except not \outer, so it can be used within \newindex.
+{\catcode`\@=11
+\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
 
 % \newindex {foo} defines an index named foo.
 % It automatically defines \fooindex such that
@@ -3148,7 +3044,6 @@ where each line of input produces a line of output.}
   \def\definedummyletter##1{%
     \expandafter\def\csname ##1\endcsname{\realbackslash ##1}%
   }%
-  \let\definedummyaccent\definedummyletter
   %
   % Do the redefinitions.
   \commondummies
@@ -3171,7 +3066,6 @@ where each line of input produces a line of output.}
   \def\definedummyletter##1{%
     \expandafter\def\csname ##1\endcsname{@##1}%
   }%
-  \let\definedummyaccent\definedummyletter
   %
   % Do the redefinitions.
   \commondummies
@@ -3184,11 +3078,26 @@ where each line of input produces a line of output.}
   %
   \normalturnoffactive
   %
-  \commondummiesnofonts
-  %
+  % Control letters and accents.
   \definedummyletter{_}%
-  %
-  % Non-English letters.
+  \definedummyletter{,}%
+  \definedummyletter{"}%
+  \definedummyletter{`}%
+  \definedummyletter{'}%
+  \definedummyletter{^}%
+  \definedummyletter{~}%
+  \definedummyletter{=}%
+  \definedummyword{u}%
+  \definedummyword{v}%
+  \definedummyword{H}%
+  \definedummyword{dotaccent}%
+  \definedummyword{ringaccent}%
+  \definedummyword{tieaccent}%
+  \definedummyword{ubaraccent}%
+  \definedummyword{udotaccent}%
+  \definedummyword{dotless}%
+  %
+  % Other non-English letters.
   \definedummyword{AA}%
   \definedummyword{AE}%
   \definedummyword{L}%
@@ -3200,10 +3109,6 @@ where each line of input produces a line of output.}
   \definedummyword{oe}%
   \definedummyword{o}%
   \definedummyword{ss}%
-  \definedummyword{exclamdown}%
-  \definedummyword{questiondown}%
-  \definedummyword{ordf}%
-  \definedummyword{ordm}%
   %
   % Although these internal commands shouldn't show up, sometimes they do.
   \definedummyword{bf}%
@@ -3215,19 +3120,41 @@ where each line of input produces a line of output.}
   \definedummyword{tclose}%
   \definedummyword{tt}%
   %
-  \definedummyword{LaTeX}%
+  % Texinfo font commands.
+  \definedummyword{b}%
+  \definedummyword{i}%
+  \definedummyword{r}%
+  \definedummyword{sc}%
+  \definedummyword{t}%
+  %
   \definedummyword{TeX}%
+  \definedummyword{acronym}%
+  \definedummyword{cite}%
+  \definedummyword{code}%
+  \definedummyword{command}%
+  \definedummyword{dfn}%
+  \definedummyword{dots}%
+  \definedummyword{emph}%
+  \definedummyword{env}%
+  \definedummyword{file}%
+  \definedummyword{kbd}%
+  \definedummyword{key}%
+  \definedummyword{math}%
+  \definedummyword{option}%
+  \definedummyword{samp}%
+  \definedummyword{strong}%
+  \definedummyword{uref}%
+  \definedummyword{url}%
+  \definedummyword{var}%
+  \definedummyword{w}%
   %
   % Assorted special characters.
   \definedummyword{bullet}%
-  \definedummyword{comma}%
   \definedummyword{copyright}%
-  \definedummyword{registeredsymbol}%
   \definedummyword{dots}%
   \definedummyword{enddots}%
   \definedummyword{equiv}%
   \definedummyword{error}%
-  \definedummyword{euro}%
   \definedummyword{expansion}%
   \definedummyword{minus}%
   \definedummyword{pounds}%
@@ -3235,9 +3162,10 @@ where each line of input produces a line of output.}
   \definedummyword{print}%
   \definedummyword{result}%
   %
-  % Handle some cases of @value -- where it does not contain any
+  % Handle some cases of @value -- where the variable name does not
+  % contain - or _, and the value does not contain any
   % (non-fully-expandable) commands.
-  \makevalueexpandable
+  \let\value = \expandablevalue
   %
   % Normal spaces, not active ones.
   \unsepspaces
@@ -3246,97 +3174,45 @@ where each line of input produces a line of output.}
   \turnoffmacros
 }
 
-% \commondummiesnofonts: common to \commondummies and \indexnofonts.
-%
-% Better have this without active chars.
-{
-  \catcode`\~=\other
-  \gdef\commondummiesnofonts{%
-    % Control letters and accents.
-    \definedummyletter{!}%
-    \definedummyaccent{"}%
-    \definedummyaccent{'}%
-    \definedummyletter{*}%
-    \definedummyaccent{,}%
-    \definedummyletter{.}%
-    \definedummyletter{/}%
-    \definedummyletter{:}%
-    \definedummyaccent{=}%
-    \definedummyletter{?}%
-    \definedummyaccent{^}%
-    \definedummyaccent{`}%
-    \definedummyaccent{~}%
-    \definedummyword{u}%
-    \definedummyword{v}%
-    \definedummyword{H}%
-    \definedummyword{dotaccent}%
-    \definedummyword{ringaccent}%
-    \definedummyword{tieaccent}%
-    \definedummyword{ubaraccent}%
-    \definedummyword{udotaccent}%
-    \definedummyword{dotless}%
-    %
-    % Texinfo font commands.
-    \definedummyword{b}%
-    \definedummyword{i}%
-    \definedummyword{r}%
-    \definedummyword{sc}%
-    \definedummyword{t}%
-    %
-    % Commands that take arguments.
-    \definedummyword{acronym}%
-    \definedummyword{cite}%
-    \definedummyword{code}%
-    \definedummyword{command}%
-    \definedummyword{dfn}%
-    \definedummyword{emph}%
-    \definedummyword{env}%
-    \definedummyword{file}%
-    \definedummyword{kbd}%
-    \definedummyword{key}%
-    \definedummyword{math}%
-    \definedummyword{option}%
-    \definedummyword{samp}%
-    \definedummyword{strong}%
-    \definedummyword{tie}%
-    \definedummyword{uref}%
-    \definedummyword{url}%
-    \definedummyword{var}%
-    \definedummyword{verb}%
-    \definedummyword{w}%
-  }
-}
+% If an index command is used in an @example environment, any spaces
+% therein should become regular spaces in the raw index file, not the
+% expansion of \tie (\leavevmode \penalty \@M \ ).
+{\obeyspaces
+ \gdef\unsepspaces{\obeyspaces\let =\space}}
+
 
 % \indexnofonts is used when outputting the strings to sort the index
 % by, and when constructing control sequence names.  It eliminates all
 % control sequences and just writes whatever the best ASCII sort string
 % would be for a given command (usually its argument).
 %
+\def\indexdummytex{TeX}
+\def\indexdummydots{...}
+%
 \def\indexnofonts{%
-  % Accent commands should become @asis.
-  \def\definedummyaccent##1{%
-    \expandafter\let\csname ##1\endcsname\asis
-  }%
-  % We can just ignore other control letters.
-  \def\definedummyletter##1{%
-    \expandafter\def\csname ##1\endcsname{}%
-  }%
-  % Hopefully, all control words can become @asis.
-  \let\definedummyword\definedummyaccent
-  %
-  \commondummiesnofonts
-  %
-  % Don't no-op \tt, since it isn't a user-level command
-  % and is used in the definitions of the active chars like <, >, |, etc.
-  % Likewise with the other plain tex font commands.
-  %\let\tt=\asis
-  %
   \def\ { }%
   \def\@{@}%
   % how to handle braces?
   \def\_{\normalunderscore}%
   %
-  % Non-English letters.
+  \let\,=\asis
+  \let\"=\asis
+  \let\`=\asis
+  \let\'=\asis
+  \let\^=\asis
+  \let\~=\asis
+  \let\==\asis
+  \let\u=\asis
+  \let\v=\asis
+  \let\H=\asis
+  \let\dotaccent=\asis
+  \let\ringaccent=\asis
+  \let\tieaccent=\asis
+  \let\ubaraccent=\asis
+  \let\udotaccent=\asis
+  \let\dotless=\asis
+  %
+  % Other non-English letters.
   \def\AA{AA}%
   \def\AE{AE}%
   \def\L{L}%
@@ -3350,170 +3226,130 @@ where each line of input produces a line of output.}
   \def\ss{ss}%
   \def\exclamdown{!}%
   \def\questiondown{?}%
-  \def\ordf{a}%
-  \def\ordm{o}%
   %
-  \def\LaTeX{LaTeX}%
-  \def\TeX{TeX}%
+  % Don't no-op \tt, since it isn't a user-level command
+  % and is used in the definitions of the active chars like <, >, |, etc.
+  % Likewise with the other plain tex font commands.
+  %\let\tt=\asis
   %
-  % Assorted special characters.
-  % (The following {} will end up in the sort string, but that's ok.)
-  \def\bullet{bullet}%
-  \def\comma{,}%
-  \def\copyright{copyright}%
-  \def\registeredsymbol{R}%
-  \def\dots{...}%
-  \def\enddots{...}%
-  \def\equiv{==}%
-  \def\error{error}%
-  \def\euro{euro}%
-  \def\expansion{==>}%
-  \def\minus{-}%
-  \def\pounds{pounds}%
-  \def\point{.}%
-  \def\print{-|}%
-  \def\result{=>}%
-  %
-  % Don't write macro names.
-  \emptyusermacros
+  % Texinfo font commands.
+  \let\b=\asis
+  \let\i=\asis
+  \let\r=\asis
+  \let\sc=\asis
+  \let\t=\asis
+  %
+  \let\TeX=\indexdummytex
+  \let\acronym=\asis
+  \let\cite=\asis
+  \let\code=\asis
+  \let\command=\asis
+  \let\dfn=\asis
+  \let\dots=\indexdummydots
+  \let\emph=\asis
+  \let\env=\asis
+  \let\file=\asis
+  \let\kbd=\asis
+  \let\key=\asis
+  \let\math=\asis
+  \let\option=\asis
+  \let\samp=\asis
+  \let\strong=\asis
+  \let\uref=\asis
+  \let\url=\asis
+  \let\var=\asis
+  \let\w=\asis
 }
 
 \let\indexbackslash=0  %overridden during \printindex.
 \let\SETmarginindex=\relax % put index entries in margin (undocumented)?
 
+% For \ifx comparisons.
+\def\emptymacro{\empty}
+
 % Most index entries go through here, but \dosubind is the general case.
-% #1 is the index name, #2 is the entry text.
-\def\doind#1#2{\dosubind{#1}{#2}{}}
+%
+\def\doind#1#2{\dosubind{#1}{#2}\empty}
 
 % Workhorse for all \fooindexes.
 % #1 is name of index, #2 is stuff to put there, #3 is subentry --
-% empty if called from \doind, as we usually are (the main exception
-% is with most defuns, which call us directly).
+% \empty if called from \doind, as we usually are.  The main exception
+% is with defuns, which call us directly.
 %
 \def\dosubind#1#2#3{%
-  \iflinks
-  {%
-    % Store the main index entry text (including the third arg).
-    \toks0 = {#2}%
-    % If third arg is present, precede it with a space.
-    \def\thirdarg{#3}%
-    \ifx\thirdarg\empty \else
-      \toks0 = \expandafter{\the\toks0 \space #3}%
-    \fi
-    %
-    \edef\writeto{\csname#1indfile\endcsname}%
-    %
-    \ifvmode
-      \dosubindsanitize
-    \else
-      \dosubindwrite
-    \fi
-  }%
-  \fi
-}
-
-% Write the entry in \toks0 to the index file:
-%
-\def\dosubindwrite{%
   % Put the index entry in the margin if desired.
   \ifx\SETmarginindex\relax\else
-    \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
+    \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
   \fi
-  %
-  % Remember, we are within a group.
-  \indexdummies % Must do this here, since \bf, etc expand at this stage
-  \escapechar=`\\
-  \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
-      % so it will be output as is; and it will print as backslash.
-  %
-  % Process the index entry with all font commands turned off, to
-  % get the string to sort by.
-  {\indexnofonts
-   \edef\temp{\the\toks0}% need full expansion
-   \xdef\indexsorttmp{\temp}%
-  }%
-  %
-  % Set up the complete index entry, with both the sort key and
-  % the original text, including any font commands.  We write
-  % three arguments to \entry to the .?? file (four in the
-  % subentry case), texindex reduces to two when writing the .??s
-  % sorted result.
-  \edef\temp{%
-    \write\writeto{%
-      \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
+  {%
+    \count255=\lastpenalty
+    {%
+      \indexdummies % Must do this here, since \bf, etc expand at this stage
+      \escapechar=`\\
+      {%
+        \let\folio = 0% We will expand all macros now EXCEPT \folio.
+        \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
+        % so it will be output as is; and it will print as backslash.
+        %
+        % The main index entry text.
+        \toks0 = {#2}%
+        %
+        % If third arg is present, precede it with space in sort key.
+        \def\thirdarg{#3}%
+        \ifx\thirdarg\emptymacro \else
+           % If the third (subentry) arg is present, add it to the index
+           % line to write.
+          \toks0 = \expandafter{\the\toks0 \space #3}%
+        \fi
+        %
+        % Process the index entry with all font commands turned off, to
+        % get the string to sort by.
+        {\indexnofonts
+         \edef\temp{\the\toks0}% need full expansion
+         \xdef\indexsorttmp{\temp}%
+        }%
+        %
+        % Set up the complete index entry, with both the sort key and
+        % the original text, including any font commands.  We write
+        % three arguments to \entry to the .?? file (four in the
+        % subentry case), texindex reduces to two when writing the .??s
+        % sorted result.
+        \edef\temp{%
+          \write\csname#1indfile\endcsname{%
+            \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
+        }%
+        %
+        % If a skip is the last thing on the list now, preserve it
+        % by backing up by \lastskip, doing the \write, then inserting
+        % the skip again.  Otherwise, the whatsit generated by the
+        % \write will make \lastskip zero.  The result is that sequences
+        % like this:
+        % @end defun
+        % @tindex whatever
+        % @defun ...
+        % will have extra space inserted, because the \medbreak in the
+        % start of the @defun won't see the skip inserted by the @end of
+        % the previous defun.
+        %
+        % But don't do any of this if we're not in vertical mode.  We
+        % don't want to do a \vskip and prematurely end a paragraph.
+        %
+        % Avoid page breaks due to these extra skips, too.
+        %
+        \iflinks
+          \ifvmode
+            \skip0 = \lastskip
+            \ifdim\lastskip = 0pt \else \nobreak\vskip-\skip0 \fi
+          \fi
+          %
+          \temp % do the write
+          %
+          \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi
+        \fi
+      }%
+    }%
+    \penalty\count255
   }%
-  \temp
-}
-
-% Take care of unwanted page breaks:
-%
-% If a skip is the last thing on the list now, preserve it
-% by backing up by \lastskip, doing the \write, then inserting
-% the skip again.  Otherwise, the whatsit generated by the
-% \write will make \lastskip zero.  The result is that sequences
-% like this:
-% @end defun
-% @tindex whatever
-% @defun ...
-% will have extra space inserted, because the \medbreak in the
-% start of the @defun won't see the skip inserted by the @end of
-% the previous defun.
-%
-% But don't do any of this if we're not in vertical mode.  We
-% don't want to do a \vskip and prematurely end a paragraph.
-%
-% Avoid page breaks due to these extra skips, too.
-%
-% But wait, there is a catch there:
-% We'll have to check whether \lastskip is zero skip.  \ifdim is not
-% sufficient for this purpose, as it ignores stretch and shrink parts
-% of the skip.  The only way seems to be to check the textual
-% representation of the skip.
-%
-% The following is almost like \def\zeroskipmacro{0.0pt} except that
-% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
-%
-\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
-%
-% ..., ready, GO:
-%
-\def\dosubindsanitize{%
-  % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
-  \skip0 = \lastskip
-  \edef\lastskipmacro{\the\lastskip}%
-  \count255 = \lastpenalty
-  %
-  % If \lastskip is nonzero, that means the last item was a
-  % skip.  And since a skip is discardable, that means this
-  % -\skip0 glue we're inserting is preceded by a
-  % non-discardable item, therefore it is not a potential
-  % breakpoint, therefore no \nobreak needed.
-  \ifx\lastskipmacro\zeroskipmacro
-  \else
-    \vskip-\skip0
-  \fi
-  %
-  \dosubindwrite
-  %
-  \ifx\lastskipmacro\zeroskipmacro
-    % If \lastskip was zero, perhaps the last item was a penalty, and
-    % perhaps it was >=10000, e.g., a \nobreak.  In that case, we want
-    % to re-insert the same penalty (values >10000 are used for various
-    % signals); since we just inserted a non-discardable item, any
-    % following glue (such as a \parskip) would be a breakpoint.  For example:
-    % 
-    %   @deffn deffn-whatever
-    %   @vindex index-whatever
-    %   Description.
-    % would allow a break between the index-whatever whatsit
-    % and the "Description." paragraph.
-    \ifnum\count255>9999 \penalty\count255 \fi
-  \else
-    % On the other hand, if we had a nonzero \lastskip,
-    % this make-up glue would be preceded by a non-discardable item
-    % (the whatsit from the \write), so we must insert a \nobreak.
-    \nobreak\vskip\skip0
-  \fi
 }
 
 % The index entry written in the file actually looks like
@@ -3551,12 +3387,14 @@ where each line of input produces a line of output.}
 % @printindex causes a particular index (the ??s file) to get printed.
 % It does not print any chapter heading (usually an @unnumbered).
 %
-\parseargdef\printindex{\begingroup
+\def\printindex{\parsearg\doprintindex}
+\def\doprintindex#1{\begingroup
   \dobreak \chapheadingskip{10000}%
   %
   \smallfonts \rm
   \tolerance = 9500
   \everypar = {}% don't want the \kern\-parindent from indentation suppression.
+  \indexbreaks
   %
   % See if the index file exists and is nonempty.
   % Change catcode of @ here so that if the index file contains
@@ -3583,7 +3421,7 @@ where each line of input produces a line of output.}
       % Index files are almost Texinfo source, but we use \ as the escape
       % character.  It would be better to use @, but that's too big a change
       % to make right now.
-      \def\indexbackslash{\backslashcurfont}%
+      \def\indexbackslash{\rawbackslashxx}%
       \catcode`\\ = 0
       \escapechar = `\\
       \begindoublecolumns
@@ -3605,10 +3443,7 @@ where each line of input produces a line of output.}
   \removelastskip
   %
   % We like breaks before the index initials, so insert a bonus.
-  \nobreak
-  \vskip 0pt plus 3\baselineskip
-  \penalty 0
-  \vskip 0pt plus -3\baselineskip
+  \penalty -300
   %
   % Typeset the initial.  Making this add up to a whole number of
   % baselineskips increases the chance of the dots lining up from column
@@ -3618,100 +3453,80 @@ where each line of input produces a line of output.}
   % No shrink because it confuses \balancecolumns.
   \vskip 1.67\baselineskip plus .5\baselineskip
   \leftline{\secbf #1}%
+  \vskip .33\baselineskip plus .1\baselineskip
+  %
   % Do our best not to break after the initial.
   \nobreak
-  \vskip .33\baselineskip plus .1\baselineskip
 }}
 
-% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
-% then page number (#2) flushed to the right margin.  It is used for index
-% and table of contents entries.  The paragraph is indented by \leftskip.
+% This typesets a paragraph consisting of #1, dot leaders, and then #2
+% flush to the right margin.  It is used for index and table of contents
+% entries.  The paragraph is indented by \leftskip.
 %
-% A straightforward implementation would start like this:
-%	\def\entry#1#2{...
-% But this frozes the catcodes in the argument, and can cause problems to
-% @code, which sets - active.  This problem was fixed by a kludge---
-% ``-'' was active throughout whole index, but this isn't really right.
-%
-% The right solution is to prevent \entry from swallowing the whole text.
-%                                 --kasal, 21nov03
-\def\entry{%
-  \begingroup
-    %
-    % Start a new paragraph if necessary, so our assignments below can't
-    % affect previous text.
-    \par
-    %
-    % Do not fill out the last line with white space.
-    \parfillskip = 0in
-    %
-    % No extra space above this paragraph.
-    \parskip = 0in
-    %
-    % Do not prefer a separate line ending with a hyphen to fewer lines.
-    \finalhyphendemerits = 0
-    %
-    % \hangindent is only relevant when the entry text and page number
-    % don't both fit on one line.  In that case, bob suggests starting the
-    % dots pretty far over on the line.  Unfortunately, a large
-    % indentation looks wrong when the entry text itself is broken across
-    % lines.  So we use a small indentation and put up with long leaders.
-    %
-    % \hangafter is reset to 1 (which is the value we want) at the start
-    % of each paragraph, so we need not do anything with that.
-    \hangindent = 2em
-    %
-    % When the entry text needs to be broken, just fill out the first line
-    % with blank space.
-    \rightskip = 0pt plus1fil
-    %
-    % A bit of stretch before each entry for the benefit of balancing
-    % columns.
-    \vskip 0pt plus1pt
+\def\entry#1#2{\begingroup
+  %
+  % Start a new paragraph if necessary, so our assignments below can't
+  % affect previous text.
+  \par
+  %
+  % Do not fill out the last line with white space.
+  \parfillskip = 0in
+  %
+  % No extra space above this paragraph.
+  \parskip = 0in
+  %
+  % Do not prefer a separate line ending with a hyphen to fewer lines.
+  \finalhyphendemerits = 0
+  %
+  % \hangindent is only relevant when the entry text and page number
+  % don't both fit on one line.  In that case, bob suggests starting the
+  % dots pretty far over on the line.  Unfortunately, a large
+  % indentation looks wrong when the entry text itself is broken across
+  % lines.  So we use a small indentation and put up with long leaders.
+  %
+  % \hangafter is reset to 1 (which is the value we want) at the start
+  % of each paragraph, so we need not do anything with that.
+  \hangindent = 2em
+  %
+  % When the entry text needs to be broken, just fill out the first line
+  % with blank space.
+  \rightskip = 0pt plus1fil
+  %
+  % A bit of stretch before each entry for the benefit of balancing columns.
+  \vskip 0pt plus1pt
+  %
+  % Start a ``paragraph'' for the index entry so the line breaking
+  % parameters we've set above will have an effect.
+  \noindent
+  %
+  % Insert the text of the index entry.  TeX will do line-breaking on it.
+  #1%
+  % The following is kludged to not output a line of dots in the index if
+  % there are no page numbers.  The next person who breaks this will be
+  % cursed by a Unix daemon.
+  \def\tempa{{\rm }}%
+  \def\tempb{#2}%
+  \edef\tempc{\tempa}%
+  \edef\tempd{\tempb}%
+  \ifx\tempc\tempd\ \else%
     %
-    % Swallow the left brace of the text (first parameter):
-    \afterassignment\doentry
-    \let\temp =
-}
-\def\doentry{%
-    \bgroup % Instead of the swallowed brace.
-      \noindent
-      \aftergroup\finishentry
-      % And now comes the text of the entry.
-}
-\def\finishentry#1{%
-    % #1 is the page number.
+    % If we must, put the page number on a line of its own, and fill out
+    % this line with blank space.  (The \hfil is overwhelmed with the
+    % fill leaders glue in \indexdotfill if the page number does fit.)
+    \hfil\penalty50
+    \null\nobreak\indexdotfill % Have leaders before the page number.
     %
-    % The following is kludged to not output a line of dots in the index if
-    % there are no page numbers.  The next person who breaks this will be
-    % cursed by a Unix daemon.
-    \def\tempa{{\rm }}%
-    \def\tempb{#1}%
-    \edef\tempc{\tempa}%
-    \edef\tempd{\tempb}%
-    \ifx\tempc\tempd
-      \ %
+    % The `\ ' here is removed by the implicit \unskip that TeX does as
+    % part of (the primitive) \par.  Without it, a spurious underfull
+    % \hbox ensues.
+    \ifpdf
+      \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
     \else
-      %
-      % If we must, put the page number on a line of its own, and fill out
-      % this line with blank space.  (The \hfil is overwhelmed with the
-      % fill leaders glue in \indexdotfill if the page number does fit.)
-      \hfil\penalty50
-      \null\nobreak\indexdotfill % Have leaders before the page number.
-      %
-      % The `\ ' here is removed by the implicit \unskip that TeX does as
-      % part of (the primitive) \par.  Without it, a spurious underfull
-      % \hbox ensues.
-      \ifpdf
-	\pdfgettoks#1.%
-	\ \the\toksA
-      \else
-	\ #1%
-      \fi
+      \ #2% The page number ends the paragraph.
     \fi
-    \par
-  \endgroup
-}
+  \fi%
+  \par
+\endgroup}
 
 % Like \dotfill except takes at least 1 em.
 \def\indexdotfill{\cleaders
@@ -3880,12 +3695,6 @@ where each line of input produces a line of output.}
 \message{sectioning,}
 % Chapters, sections, etc.
 
-% \unnumberedno is an oxymoron, of course.  But we count the unnumbered
-% sections so that we can refer to them unambiguously in the pdf
-% outlines by their "section number".  We avoid collisions with chapter
-% numbers by starting them at 10000.  (If a document ever has 10000
-% chapters, we're in trouble anyway, I'm sure.)
-\newcount\unnumberedno \unnumberedno = 10000
 \newcount\chapno
 \newcount\secno        \secno=0
 \newcount\subsecno     \subsecno=0
@@ -3893,12 +3702,9 @@ where each line of input produces a line of output.}
 
 % This counter is funny since it counts through charcodes of letters A, B, ...
 \newcount\appendixno  \appendixno = `\@
-%
 % \def\appendixletter{\char\the\appendixno}
-% We do the following ugly conditional instead of the above simple
-% construct for the sake of pdftex, which needs the actual
+% We do the following for the sake of pdftex, which needs the actual
 % letter in the expansion, not just typeset.
-%
 \def\appendixletter{%
   \ifnum\appendixno=`A A%
   \else\ifnum\appendixno=`B B%
@@ -3936,12 +3742,11 @@ where each line of input produces a line of output.}
 
 % Each @chapter defines this as the name of the chapter.
 % page headings and footings can use it.  @section does likewise.
-% However, they are not reliable, because we don't use marks.
 \def\thischapter{}
 \def\thissection{}
 
 \newcount\absseclevel % used to calculate proper heading level
-\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
+\newcount\secbase\secbase=0 % @raise/lowersections modify this count
 
 % @raisesections: treat @section as chapter, @subsection as section, etc.
 \def\raisesections{\global\advance\secbase by -1}
@@ -3951,142 +3756,121 @@ where each line of input produces a line of output.}
 \def\lowersections{\global\advance\secbase by 1}
 \let\down=\lowersections % original BFox name
 
-% we only have subsub.
-\chardef\maxseclevel = 3
-%
-% A numbered section within an unnumbered changes to unnumbered too.
-% To achive this, remember the "biggest" unnum. sec. we are currently in:
-\chardef\unmlevel = \maxseclevel
-%
-% Trace whether the current chapter is an appendix or not:
-% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
-\def\chapheadtype{N}
-
-% Choose a heading macro
-% #1 is heading type
-% #2 is heading level
-% #3 is text for heading
-\def\genhead#1#2#3{%
-  % Compute the abs. sec. level:
-  \absseclevel=#2
-  \advance\absseclevel by \secbase
-  % Make sure \absseclevel doesn't fall outside the range:
-  \ifnum \absseclevel < 0
-    \absseclevel = 0
+% Choose a numbered-heading macro
+% #1 is heading level if unmodified by @raisesections or @lowersections
+% #2 is text for heading
+\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
+\ifcase\absseclevel
+  \chapterzzz{#2}
+\or
+  \seczzz{#2}
+\or
+  \numberedsubseczzz{#2}
+\or
+  \numberedsubsubseczzz{#2}
+\else
+  \ifnum \absseclevel<0
+    \chapterzzz{#2}
   \else
-    \ifnum \absseclevel > 3
-      \absseclevel = 3
-    \fi
+    \numberedsubsubseczzz{#2}
   \fi
-  % The heading type:
-  \def\headtype{#1}%
-  \if \headtype U%
-    \ifnum \absseclevel < \unmlevel
-      \chardef\unmlevel = \absseclevel
-    \fi
+\fi
+\suppressfirstparagraphindent
+}
+
+% like \numhead, but chooses appendix heading levels
+\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
+\ifcase\absseclevel
+  \appendixzzz{#2}
+\or
+  \appendixsectionzzz{#2}
+\or
+  \appendixsubseczzz{#2}
+\or
+  \appendixsubsubseczzz{#2}
+\else
+  \ifnum \absseclevel<0
+    \appendixzzz{#2}
   \else
-    % Check for appendix sections:
-    \ifnum \absseclevel = 0
-      \edef\chapheadtype{\headtype}%
-    \else
-      \if \headtype A\if \chapheadtype N%
-	\errmessage{@appendix... within a non-appendix chapter}%
-      \fi\fi
-    \fi
-    % Check for numbered within unnumbered:
-    \ifnum \absseclevel > \unmlevel
-      \def\headtype{U}%
-    \else
-      \chardef\unmlevel = 3
-    \fi
+    \appendixsubsubseczzz{#2}
   \fi
-  % Now print the heading:
-  \if \headtype U%
-    \ifcase\absseclevel
-	\unnumberedzzz{#3}%
-    \or \unnumberedseczzz{#3}%
-    \or \unnumberedsubseczzz{#3}%
-    \or \unnumberedsubsubseczzz{#3}%
-    \fi
+\fi
+\suppressfirstparagraphindent
+}
+
+% like \numhead, but chooses numberless heading levels
+\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
+\ifcase\absseclevel
+  \unnumberedzzz{#2}
+\or
+  \unnumberedseczzz{#2}
+\or
+  \unnumberedsubseczzz{#2}
+\or
+  \unnumberedsubsubseczzz{#2}
+\else
+  \ifnum \absseclevel<0
+    \unnumberedzzz{#2}
   \else
-    \if \headtype A%
-      \ifcase\absseclevel
-	  \appendixzzz{#3}%
-      \or \appendixsectionzzz{#3}%
-      \or \appendixsubseczzz{#3}%
-      \or \appendixsubsubseczzz{#3}%
-      \fi
-    \else
-      \ifcase\absseclevel
-	  \chapterzzz{#3}%
-      \or \seczzz{#3}%
-      \or \numberedsubseczzz{#3}%
-      \or \numberedsubsubseczzz{#3}%
-      \fi
-    \fi
+    \unnumberedsubsubseczzz{#2}
   \fi
-  \suppressfirstparagraphindent
-}
-
-% an interface:
-\def\numhead{\genhead N}
-\def\apphead{\genhead A}
-\def\unnmhead{\genhead U}
-
-% @chapter, @appendix, @unnumbered.  Increment top-level counter, reset
-% all lower-level sectioning counters to zero.
-%
-% Also set \chaplevelprefix, which we prepend to @float sequence numbers
-% (e.g., figures), q.v.  By default (before any chapter), that is empty.
-\let\chaplevelprefix = \empty
-%
-\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
-\def\chapterzzz#1{%
-  % section resetting is \global in case the chapter is in a group, such
-  % as an @include file.
-  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
-    \global\advance\chapno by 1
-  %
-  % Used for \float.
-  \gdef\chaplevelprefix{\the\chapno.}%
-  \resetallfloatnos
-  %
-  \message{\putwordChapter\space \the\chapno}%
-  %
-  % Write the actual heading.
-  \chapmacro{#1}{Ynumbered}{\the\chapno}%
-  %
-  % So @section and the like are numbered underneath this chapter.
+\fi
+\suppressfirstparagraphindent
+}
+
+% @chapter, @appendix, @unnumbered.
+\def\thischaptername{No Chapter Title}
+\outer\def\chapter{\parsearg\chapteryyy}
+\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
+\def\chapterzzz #1{%
+  \secno=0 \subsecno=0 \subsubsecno=0
+  \global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}%
+  \chapmacro {#1}{\the\chapno}%
+  \gdef\thissection{#1}%
+  \gdef\thischaptername{#1}%
+  % We don't substitute the actual chapter name into \thischapter
+  % because we don't want its macros evaluated now.
+  \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
+  \writetocentry{chap}{#1}{{\the\chapno}}
+  \donoderef
   \global\let\section = \numberedsec
   \global\let\subsection = \numberedsubsec
   \global\let\subsubsection = \numberedsubsubsec
 }
 
-\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz
-\def\appendixzzz#1{%
-  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
-    \global\advance\appendixno by 1
-  \gdef\chaplevelprefix{\appendixletter.}%
-  \resetallfloatnos
-  %
-  \def\appendixnum{\putwordAppendix\space \appendixletter}%
-  \message{\appendixnum}%
-  %
-  \chapmacro{#1}{Yappendix}{\appendixletter}%
-  %
+% we use \chapno to avoid indenting back
+\def\appendixbox#1{%
+  \setbox0 = \hbox{\putwordAppendix{} \the\chapno}%
+  \hbox to \wd0{#1\hss}}
+
+\outer\def\appendix{\parsearg\appendixyyy}
+\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
+\def\appendixzzz #1{%
+  \secno=0 \subsecno=0 \subsubsecno=0
+  \global\advance \appendixno by 1
+  \message{\putwordAppendix\space \appendixletter}%
+  \chapmacro {#1}{\appendixbox{\putwordAppendix{} \appendixletter}}%
+  \gdef\thissection{#1}%
+  \gdef\thischaptername{#1}%
+  \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
+  \writetocentry{appendix}{#1}{{\appendixletter}}
+  \appendixnoderef
   \global\let\section = \appendixsec
   \global\let\subsection = \appendixsubsec
   \global\let\subsubsection = \appendixsubsubsec
 }
 
-\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
-\def\unnumberedzzz#1{%
-  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
-    \global\advance\unnumberedno by 1
-  %
-  % Since an unnumbered has no number, no prefix for figures.
-  \global\let\chaplevelprefix = \empty
-  \resetallfloatnos
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\def\centerchap{\parsearg\centerchapyyy}
+\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
+
+% @top is like @unnumbered.
+\outer\def\top{\parsearg\unnumberedyyy}
+
+\outer\def\unnumbered{\parsearg\unnumberedyyy}
+\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
+\def\unnumberedzzz #1{%
+  \secno=0 \subsecno=0 \subsubsecno=0
   %
   % This used to be simply \message{#1}, but TeX fully expands the
   % argument to \message.  Therefore, if #1 contained @-commands, TeX
@@ -4099,98 +3883,134 @@ where each line of input produces a line of output.}
   % \the<toks register> to achieve this: TeX expands \the<toks> only once,
   % simply yielding the contents of <toks register>.  (We also do this for
   % the toc entries.)
-  \toks0 = {#1}%
-  \message{(\the\toks0)}%
-  %
-  \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
+  \toks0 = {#1}\message{(\the\toks0)}%
   %
+  \unnumbchapmacro {#1}%
+  \gdef\thischapter{#1}\gdef\thissection{#1}%
+  \writetocentry{unnumbchap}{#1}{{\the\chapno}}
+  \unnumbnoderef
   \global\let\section = \unnumberedsec
   \global\let\subsection = \unnumberedsubsec
   \global\let\subsubsection = \unnumberedsubsubsec
 }
 
-% @centerchap is like @unnumbered, but the heading is centered.
-\outer\parseargdef\centerchap{%
-  % Well, we could do the following in a group, but that would break
-  % an assumption that \chapmacro is called at the outermost level.
-  % Thus we are safer this way:		--kasal, 24feb04
-  \let\centerparametersmaybe = \centerparameters
-  \unnmhead0{#1}%
-  \let\centerparametersmaybe = \relax
-}
-
-% @top is like @unnumbered.
-\let\top\unnumbered
-
 % Sections.
-\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
-\def\seczzz#1{%
-  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
-  \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
+\outer\def\numberedsec{\parsearg\secyyy}
+\def\secyyy #1{\numhead1{#1}} % normally calls seczzz
+\def\seczzz #1{%
+  \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
+  \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
+  \writetocentry{sec}{#1}{{\the\chapno}{\the\secno}}
+  \donoderef
+  \nobreak
 }
 
-\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz
-\def\appendixsectionzzz#1{%
-  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
-  \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
+\outer\def\appendixsection{\parsearg\appendixsecyyy}
+\outer\def\appendixsec{\parsearg\appendixsecyyy}
+\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
+\def\appendixsectionzzz #1{%
+  \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
+  \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
+  \writetocentry{sec}{#1}{{\appendixletter}{\the\secno}}
+  \appendixnoderef
+  \nobreak
 }
-\let\appendixsec\appendixsection
 
-\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz
-\def\unnumberedseczzz#1{%
-  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
-  \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
+\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
+\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
+\def\unnumberedseczzz #1{%
+  \plainsecheading {#1}\gdef\thissection{#1}%
+  \writetocentry{unnumbsec}{#1}{{\the\chapno}{\the\secno}}
+  \unnumbnoderef
+  \nobreak
 }
 
 % Subsections.
-\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz
-\def\numberedsubseczzz#1{%
-  \global\subsubsecno=0  \global\advance\subsecno by 1
-  \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
+\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
+\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
+\def\numberedsubseczzz #1{%
+  \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
+  \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
+  \writetocentry{subsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}}
+  \donoderef
+  \nobreak
 }
 
-\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz
-\def\appendixsubseczzz#1{%
-  \global\subsubsecno=0  \global\advance\subsecno by 1
-  \sectionheading{#1}{subsec}{Yappendix}%
-                 {\appendixletter.\the\secno.\the\subsecno}%
+\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
+\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
+\def\appendixsubseczzz #1{%
+  \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
+  \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
+  \writetocentry{subsec}{#1}{{\appendixletter}{\the\secno}{\the\subsecno}}
+  \appendixnoderef
+  \nobreak
 }
 
-\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
-\def\unnumberedsubseczzz#1{%
-  \global\subsubsecno=0  \global\advance\subsecno by 1
-  \sectionheading{#1}{subsec}{Ynothing}%
-                 {\the\unnumberedno.\the\secno.\the\subsecno}%
+\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
+\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
+\def\unnumberedsubseczzz #1{%
+  \plainsubsecheading {#1}\gdef\thissection{#1}%
+  \writetocentry{unnumbsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}}
+  \unnumbnoderef
+  \nobreak
 }
 
 % Subsubsections.
-\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz
-\def\numberedsubsubseczzz#1{%
-  \global\advance\subsubsecno by 1
-  \sectionheading{#1}{subsubsec}{Ynumbered}%
-                 {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
+\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
+\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
+\def\numberedsubsubseczzz #1{%
+  \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
+  \subsubsecheading {#1}
+    {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
+  \writetocentry{subsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}
+  \donoderef
+  \nobreak
 }
 
-\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz
-\def\appendixsubsubseczzz#1{%
-  \global\advance\subsubsecno by 1
-  \sectionheading{#1}{subsubsec}{Yappendix}%
-                 {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
+\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
+\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
+\def\appendixsubsubseczzz #1{%
+  \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
+  \subsubsecheading {#1}
+    {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
+  \writetocentry{subsubsec}{#1}{{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}
+  \appendixnoderef
+  \nobreak
 }
 
-\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
-\def\unnumberedsubsubseczzz#1{%
-  \global\advance\subsubsecno by 1
-  \sectionheading{#1}{subsubsec}{Ynothing}%
-                 {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
+\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
+\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
+\def\unnumberedsubsubseczzz #1{%
+  \plainsubsubsecheading {#1}\gdef\thissection{#1}%
+  \writetocentry{unnumbsubsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}
+  \unnumbnoderef
+  \nobreak
 }
 
+% These are variants which are not "outer", so they can appear in @ifinfo.
+% Actually, they should now be obsolete; ordinary section commands should work.
+\def\infotop{\parsearg\unnumberedzzz}
+\def\infounnumbered{\parsearg\unnumberedzzz}
+\def\infounnumberedsec{\parsearg\unnumberedseczzz}
+\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
+\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
+
+\def\infoappendix{\parsearg\appendixzzz}
+\def\infoappendixsec{\parsearg\appendixseczzz}
+\def\infoappendixsubsec{\parsearg\appendixsubseczzz}
+\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
+
+\def\infochapter{\parsearg\chapterzzz}
+\def\infosection{\parsearg\sectionzzz}
+\def\infosubsection{\parsearg\subsectionzzz}
+\def\infosubsubsection{\parsearg\subsubsectionzzz}
+
 % These macros control what the section commands do, according
 % to what kind of chapter we are in (ordinary, appendix, or unnumbered).
 % Define them by default for a numbered chapter.
-\let\section = \numberedsec
-\let\subsection = \numberedsubsec
-\let\subsubsection = \numberedsubsubsec
+\global\let\section = \numberedsec
+\global\let\subsection = \numberedsubsec
+\global\let\subsubsection = \numberedsubsubsec
 
 % Define @majorheading, @heading and @subheading
 
@@ -4203,27 +4023,23 @@ where each line of input produces a line of output.}
 %          if justification is not attempted.  Hence \raggedright.
 
 
-\def\majorheading{%
+\def\majorheading{\parsearg\majorheadingzzz}
+\def\majorheadingzzz #1{%
   {\advance\chapheadingskip by 10pt \chapbreak }%
-  \parsearg\chapheadingzzz
-}
+  {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+                    \parindent=0pt\raggedright
+                    \rm #1\hfill}}\bigskip \par\penalty 200}
 
-\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
-\def\chapheadingzzz#1{%
+\def\chapheading{\parsearg\chapheadingzzz}
+\def\chapheadingzzz #1{\chapbreak %
   {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                     \parindent=0pt\raggedright
-                    \rm #1\hfill}}%
-  \bigskip \par\penalty 200\relax
-  \suppressfirstparagraphindent
-}
+                    \rm #1\hfill}}\bigskip \par\penalty 200}
 
 % @heading, @subheading, @subsubheading.
-\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
-  \suppressfirstparagraphindent}
-\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
-  \suppressfirstparagraphindent}
-\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
-  \suppressfirstparagraphindent}
+\def\heading{\parsearg\plainsecheading}
+\def\subheading{\parsearg\plainsubsecheading}
+\def\subsubheading{\parsearg\plainsubsubsecheading}
 
 % These macros generate a chapter, section, etc. heading only
 % (including whitespace, linebreaking, etc. around it),
@@ -4232,6 +4048,8 @@ where each line of input produces a line of output.}
 %%% Args are the skip and penalty (usually negative)
 \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
 
+\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
+
 %%% Define plain chapter starts, and page on/off switching for it
 % Parameter controlling skip before chapter headings (if needed)
 
@@ -4254,7 +4072,7 @@ where each line of input produces a line of output.}
 \global\let\pagealignmacro=\chappager
 \global\def\HEADINGSon{\HEADINGSsingle}}
 
-\def\CHAPPAGodd{%
+\def\CHAPPAGodd{
 \global\let\contentsalignmacro = \chapoddpage
 \global\let\pchapsepmacro=\chapoddpage
 \global\let\pagealignmacro=\chapoddpage
@@ -4262,193 +4080,116 @@ where each line of input produces a line of output.}
 
 \CHAPPAGon
 
-% Chapter opening.
-%
-% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
-% Yappendix, Yomitfromtoc), #3 the chapter number.
-%
-% To test against our argument.
-\def\Ynothingkeyword{Ynothing}
-\def\Yomitfromtockeyword{Yomitfromtoc}
-\def\Yappendixkeyword{Yappendix}
-%
-\def\chapmacro#1#2#3{%
+\def\CHAPFplain{
+\global\let\chapmacro=\chfplain
+\global\let\unnumbchapmacro=\unnchfplain
+\global\let\centerchapmacro=\centerchfplain}
+
+% Plain chapter opening.
+% #1 is the text, #2 the chapter number or empty if unnumbered.
+\def\chfplain#1#2{%
   \pchapsepmacro
   {%
     \chapfonts \rm
-    %
-    % Have to define \thissection before calling \donoderef, because the
-    % xref code eventually uses it.  On the other hand, it has to be called
-    % after \pchapsepmacro, or the headline will change too soon.
-    \gdef\thissection{#1}%
-    \gdef\thischaptername{#1}%
-    %
-    % Only insert the separating space if we have a chapter/appendix
-    % number, and don't print the unnumbered ``number''.
-    \def\temptype{#2}%
-    \ifx\temptype\Ynothingkeyword
-      \setbox0 = \hbox{}%
-      \def\toctype{unnchap}%
-      \def\thischapter{#1}%
-    \else\ifx\temptype\Yomitfromtockeyword
-      \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
-      \def\toctype{omit}%
-      \xdef\thischapter{}%
-    \else\ifx\temptype\Yappendixkeyword
-      \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
-      \def\toctype{app}%
-      % We don't substitute the actual chapter name into \thischapter
-      % because we don't want its macros evaluated now.  And we don't
-      % use \thissection because that changes with each section.
-      %
-      \xdef\thischapter{\putwordAppendix{} \appendixletter:
-                        \noexpand\thischaptername}%
-    \else
-      \setbox0 = \hbox{#3\enspace}%
-      \def\toctype{numchap}%
-      \xdef\thischapter{\putwordChapter{} \the\chapno:
-                        \noexpand\thischaptername}%
-    \fi\fi\fi
-    %
-    % Write the toc entry for this chapter.  Must come before the
-    % \donoderef, because we include the current node name in the toc
-    % entry, and \donoderef resets it to empty.
-    \writetocentry{\toctype}{#1}{#3}%
-    %
-    % For pdftex, we have to write out the node definition (aka, make
-    % the pdfdest) after any page break, but before the actual text has
-    % been typeset.  If the destination for the pdf outline is after the
-    % text, then jumping from the outline may wind up with the text not
-    % being visible, for instance under high magnification.
-    \donoderef{#2}%
-    %
-    % Typeset the actual heading.
+    \def\chapnum{#2}%
+    \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
     \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
-          \hangindent=\wd0 \centerparametersmaybe
+          \hangindent = \wd0 \centerparametersmaybe
           \unhbox0 #1\par}%
   }%
   \nobreak\bigskip % no page break after a chapter title
   \nobreak
 }
 
+% Plain opening for unnumbered.
+\def\unnchfplain#1{\chfplain{#1}{}}
+
 % @centerchap -- centered and unnumbered.
 \let\centerparametersmaybe = \relax
-\def\centerparameters{%
-  \advance\rightskip by 3\rightskip
-  \leftskip = \rightskip
-  \parfillskip = 0pt
-}
+\def\centerchfplain#1{{%
+  \def\centerparametersmaybe{%
+    \advance\rightskip by 3\rightskip
+    \leftskip = \rightskip
+    \parfillskip = 0pt
+  }%
+  \chfplain{#1}{}%
+}}
 
+\CHAPFplain % The default
 
-% I don't think this chapter style is supported any more, so I'm not
-% updating it with the new noderef stuff.  We'll see.  --karl, 11aug03.
-%
-\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
-%
 \def\unnchfopen #1{%
 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                        \parindent=0pt\raggedright
                        \rm #1\hfill}}\bigskip \par\nobreak
 }
+
 \def\chfopen #1#2{\chapoddpage {\chapfonts
 \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
 \par\penalty 5000 %
 }
+
 \def\centerchfopen #1{%
 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                        \parindent=0pt
                        \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
 }
-\def\CHAPFopen{%
-  \global\let\chapmacro=\chfopen
-  \global\let\centerchapmacro=\centerchfopen}
 
+\def\CHAPFopen{
+\global\let\chapmacro=\chfopen
+\global\let\unnumbchapmacro=\unnchfopen
+\global\let\centerchapmacro=\centerchfopen}
 
-% Section titles.  These macros combine the section number parts and
-% call the generic \sectionheading to do the printing.
-%
+
+% Section titles.
 \newskip\secheadingskip
-\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
+\def\secheadingbreak{\dobreak \secheadingskip {-1000}}
+\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
+\def\plainsecheading#1{\sectionheading{sec}{}{#1}}
 
 % Subsection titles.
-\newskip\subsecheadingskip
-\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
+\newskip \subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
+\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
+\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
 
 % Subsubsection titles.
-\def\subsubsecheadingskip{\subsecheadingskip}
-\def\subsubsecheadingbreak{\subsecheadingbreak}
+\let\subsubsecheadingskip = \subsecheadingskip
+\let\subsubsecheadingbreak = \subsecheadingbreak
+\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}}
+\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}}
 
 
-% Print any size, any type, section title.
+% Print any size section title.
 %
-% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
-% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
-% section number.
-%
-\def\sectionheading#1#2#3#4{%
+% #1 is the section type (sec/subsec/subsubsec), #2 is the section
+% number (maybe empty), #3 the text.
+\def\sectionheading#1#2#3{%
+  {%
+    \expandafter\advance\csname #1headingskip\endcsname by \parskip
+    \csname #1headingbreak\endcsname
+  }%
   {%
     % Switch to the right set of fonts.
-    \csname #2fonts\endcsname \rm
-    %
-    % Insert space above the heading.
-    \csname #2headingbreak\endcsname
-    %
-    % Only insert the space after the number if we have a section number.
-    \def\sectionlevel{#2}%
-    \def\temptype{#3}%
-    %
-    \ifx\temptype\Ynothingkeyword
-      \setbox0 = \hbox{}%
-      \def\toctype{unn}%
-      \gdef\thissection{#1}%
-    \else\ifx\temptype\Yomitfromtockeyword
-      % for @headings -- no section number, don't include in toc,
-      % and don't redefine \thissection.
-      \setbox0 = \hbox{}%
-      \def\toctype{omit}%
-      \let\sectionlevel=\empty
-    \else\ifx\temptype\Yappendixkeyword
-      \setbox0 = \hbox{#4\enspace}%
-      \def\toctype{app}%
-      \gdef\thissection{#1}%
-    \else
-      \setbox0 = \hbox{#4\enspace}%
-      \def\toctype{num}%
-      \gdef\thissection{#1}%
-    \fi\fi\fi
+    \csname #1fonts\endcsname \rm
     %
-    % Write the toc entry (before \donoderef).  See comments in \chfplain.
-    \writetocentry{\toctype\sectionlevel}{#1}{#4}%
+    % Only insert the separating space if we have a section number.
+    \def\secnum{#2}%
+    \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
     %
-    % Write the node reference (= pdf destination for pdftex).
-    % Again, see comments in \chfplain.
-    \donoderef{#3}%
-    %
-    % Output the actual section heading.
     \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
-          \hangindent=\wd0  % zero if no section number
-          \unhbox0 #1}%
+          \hangindent = \wd0 % zero if no section number
+          \unhbox0 #3}%
   }%
-  % Add extra space after the heading -- half of whatever came above it.
-  % Don't allow stretch, though.
-  \kern .5 \csname #2headingskip\endcsname
-  %
-  % Do not let the kern be a potential breakpoint, as it would be if it
-  % was followed by glue.
+  % Add extra space after the heading -- either a line space or a
+  % paragraph space, whichever is more.  (Some people like to set
+  % \parskip to large values for some reason.)  Don't allow stretch, though.
+  \nobreak
+  \ifdim\parskip>\normalbaselineskip
+    \kern\parskip
+  \else
+    \kern\normalbaselineskip
+  \fi
   \nobreak
-  %
-  % We'll almost certainly start a paragraph next, so don't let that
-  % glue accumulate.  (Not a breakpoint because it's preceded by a
-  % discardable item.)
-  \vskip-\parskip
-  % 
-  % This is purely so the last item on the list is a known \penalty >
-  % 10000.  This is so \startdefun can avoid allowing breakpoints after
-  % section headings.  Otherwise, it would insert a valid breakpoint between:
-  % 
-  %   @section sec-whatever
-  %   @deffn def-whatever
-  \penalty 10001
 }
 
 
@@ -4457,152 +4198,119 @@ where each line of input produces a line of output.}
 \newwrite\tocfile
 
 % Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc.
-%
-% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
-% We append the current node name (if any) and page number as additional
-% arguments for the \{chap,sec,...}entry macros which will eventually
-% read this.  The node name is used in the pdf outlines as the
-% destination to jump to.
+% Called from @chapter, etc.  We supply {\folio} at the end of the
+% argument, which will end up as the last argument to the \...entry macro.
 %
+% Usage: \writetocentry{chap}{The Name of The Game}{{\the\chapno}}
 % We open the .toc file for writing here instead of at @setfilename (or
 % any other fixed time) so that @contents can be anywhere in the document.
-% But if #1 is `omit', then we don't do anything.  This is used for the
-% table of contents chapter openings themselves.
 %
 \newif\iftocfileopened
-\def\omitkeyword{omit}%
-%
 \def\writetocentry#1#2#3{%
-  \edef\writetoctype{#1}%
-  \ifx\writetoctype\omitkeyword \else
-    \iftocfileopened\else
-      \immediate\openout\tocfile = \jobname.toc
-      \global\tocfileopenedtrue
-    \fi
-    %
-    \iflinks
-      \toks0 = {#2}%
-      \toks2 = \expandafter{\lastnode}%
-      \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}%
-                               {\the\toks2}{\noexpand\folio}}}%
-      \temp
-    \fi
+  \iftocfileopened\else
+    \immediate\openout\tocfile = \jobname.toc
+    \global\tocfileopenedtrue
   \fi
   %
-  % Tell \shipout to create a pdf destination on each page, if we're
-  % writing pdf.  These are used in the table of contents.  We can't
-  % just write one on every page because the title pages are numbered
-  % 1 and 2 (the page numbers aren't printed), and so are the first
-  % two pages of the document.  Thus, we'd have two destinations named
-  % `1', and two named `2'.
-  \ifpdf \global\pdfmakepagedesttrue \fi
+  \iflinks
+    \toks0 = {#2}%
+    \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}#3{\folio}}}%
+    \temp
+  \fi
+  %
+  % Tell \shipout to create a page destination if we're doing pdf, which
+  % will be the target of the links in the table of contents.  We can't
+  % just do it on every page because the title pages are numbered 1 and
+  % 2 (the page numbers aren't printed), and so are the first two pages
+  % of the document.  Thus, we'd have two destinations named `1', and
+  % two named `2'.
+  \ifpdf \pdfmakepagedesttrue \fi
 }
 
 \newskip\contentsrightmargin \contentsrightmargin=1in
 \newcount\savepageno
 \newcount\lastnegativepageno \lastnegativepageno = -1
 
-% Prepare to read what we've written to \tocfile.
+% Finish up the main text and prepare to read what we've written
+% to \tocfile.
 %
 \def\startcontents#1{%
-  % If @setchapternewpage on, and @headings double, the contents should
-  % start on an odd page, unlike chapters.  Thus, we maintain
-  % \contentsalignmacro in parallel with \pagealignmacro.
-  % From: Torbjorn Granlund <tege@matematik.su.se>
-  \contentsalignmacro
-  \immediate\closeout\tocfile
-  %
-  % Don't need to put `Contents' or `Short Contents' in the headline.
-  % It is abundantly clear what they are.
-  \def\thischapter{}%
-  \chapmacro{#1}{Yomitfromtoc}{}%
-  %
-  \savepageno = \pageno
-  \begingroup                  % Set up to handle contents files properly.
-    \catcode`\\=0  \catcode`\{=1  \catcode`\}=2  \catcode`\@=11
-    % We can't do this, because then an actual ^ in a section
-    % title fails, e.g., @chapter ^ -- exponentiation.  --karl, 9jul97.
-    %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
-    \raggedbottom             % Worry more about breakpoints than the bottom.
-    \advance\hsize by -\contentsrightmargin % Don't use the full line length.
-    %
-    % Roman numerals for page numbers.
-    \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
+   % If @setchapternewpage on, and @headings double, the contents should
+   % start on an odd page, unlike chapters.  Thus, we maintain
+   % \contentsalignmacro in parallel with \pagealignmacro.
+   % From: Torbjorn Granlund <tege@matematik.su.se>
+   \contentsalignmacro
+   \immediate\closeout\tocfile
+   %
+   % Don't need to put `Contents' or `Short Contents' in the headline.
+   % It is abundantly clear what they are.
+   \unnumbchapmacro{#1}\def\thischapter{}%
+   \savepageno = \pageno
+   \begingroup                  % Set up to handle contents files properly.
+      \catcode`\\=0  \catcode`\{=1  \catcode`\}=2  \catcode`\@=11
+      % We can't do this, because then an actual ^ in a section
+      % title fails, e.g., @chapter ^ -- exponentiation.  --karl, 9jul97.
+      %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
+      \raggedbottom             % Worry more about breakpoints than the bottom.
+      \advance\hsize by -\contentsrightmargin % Don't use the full line length.
+      %
+      % Roman numerals for page numbers.
+      \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
 }
 
 
 % Normal (long) toc.
 \def\contents{%
-  \startcontents{\putwordTOC}%
-    \openin 1 \jobname.toc
-    \ifeof 1 \else
-      \input \jobname.toc
-    \fi
-    \vfill \eject
-    \contentsalignmacro % in case @setchapternewpage odd is in effect
-    \ifeof 1 \else
-      \pdfmakeoutlines
-    \fi
-    \closein 1
-  \endgroup
-  \lastnegativepageno = \pageno
-  \global\pageno = \savepageno
+   \startcontents{\putwordTOC}%
+     \openin 1 \jobname.toc
+     \ifeof 1 \else
+       \closein 1
+       \input \jobname.toc
+     \fi
+     \vfill \eject
+     \contentsalignmacro % in case @setchapternewpage odd is in effect
+     \pdfmakeoutlines
+   \endgroup
+   \lastnegativepageno = \pageno
+   \global\pageno = \savepageno
 }
 
 % And just the chapters.
 \def\summarycontents{%
-  \startcontents{\putwordShortTOC}%
-    %
-    \let\numchapentry = \shortchapentry
-    \let\appentry = \shortchapentry
-    \let\unnchapentry = \shortunnchapentry
-    % We want a true roman here for the page numbers.
-    \secfonts
-    \let\rm=\shortcontrm \let\bf=\shortcontbf
-    \let\sl=\shortcontsl \let\tt=\shortconttt
-    \rm
-    \hyphenpenalty = 10000
-    \advance\baselineskip by 1pt % Open it up a little.
-    \def\numsecentry##1##2##3##4{}
-    \let\appsecentry = \numsecentry
-    \let\unnsecentry = \numsecentry
-    \let\numsubsecentry = \numsecentry
-    \let\appsubsecentry = \numsecentry
-    \let\unnsubsecentry = \numsecentry
-    \let\numsubsubsecentry = \numsecentry
-    \let\appsubsubsecentry = \numsecentry
-    \let\unnsubsubsecentry = \numsecentry
-    \openin 1 \jobname.toc
-    \ifeof 1 \else
-      \input \jobname.toc
-    \fi
-    \closein 1
-    \vfill \eject
-    \contentsalignmacro % in case @setchapternewpage odd is in effect
-  \endgroup
-  \lastnegativepageno = \pageno
-  \global\pageno = \savepageno
+   \startcontents{\putwordShortTOC}%
+      %
+      \let\chapentry = \shortchapentry
+      \let\appendixentry = \shortappendixentry
+      \let\unnumbchapentry = \shortunnumberedentry
+      % We want a true roman here for the page numbers.
+      \secfonts
+      \let\rm=\shortcontrm \let\bf=\shortcontbf
+      \let\sl=\shortcontsl \let\tt=\shortconttt
+      \rm
+      \hyphenpenalty = 10000
+      \advance\baselineskip by 1pt % Open it up a little.
+      \def\secentry ##1##2##3##4{}
+      \def\subsecentry ##1##2##3##4##5{}
+      \def\subsubsecentry ##1##2##3##4##5##6{}
+      \let\unnumbsecentry = \secentry
+      \let\unnumbsubsecentry = \subsecentry
+      \let\unnumbsubsubsecentry = \subsubsecentry
+      \openin 1 \jobname.toc
+      \ifeof 1 \else
+        \closein 1
+        \input \jobname.toc
+      \fi
+     \vfill \eject
+     \contentsalignmacro % in case @setchapternewpage odd is in effect
+   \endgroup
+   \lastnegativepageno = \pageno
+   \global\pageno = \savepageno
 }
 \let\shortcontents = \summarycontents
 
-% Typeset the label for a chapter or appendix for the short contents.
-% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
-%
-\def\shortchaplabel#1{%
-  % This space should be enough, since a single number is .5em, and the
-  % widest letter (M) is 1em, at least in the Computer Modern fonts.
-  % But use \hss just in case.
-  % (This space doesn't include the extra space that gets added after
-  % the label; that gets put in by \shortchapentry above.)
-  %
-  % We'd like to right-justify chapter numbers, but that looks strange
-  % with appendix letters.  And right-justifying numbers and
-  % left-justifying letters looks strange when there is less than 10
-  % chapters.  Have to read the whole toc once to know how many chapters
-  % there are before deciding ...
-  \hbox to 1em{#1\hss}%
-}
+\ifpdf
+  \pdfcatalog{/PageMode /UseOutlines}%
+\fi
 
 % These macros generate individual entries in the table of contents.
 % The first argument is the chapter or section name.
@@ -4610,46 +4318,58 @@ where each line of input produces a line of output.}
 % The arguments in between are the chapter number, section number, ...
 
 % Chapters, in the main contents.
-\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
+\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
 %
 % Chapters, in the short toc.
 % See comments in \dochapentry re vbox and related settings.
-\def\shortchapentry#1#2#3#4{%
-  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
+\def\shortchapentry#1#2#3{%
+  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}%
 }
 
 % Appendices, in the main contents.
-% Need the word Appendix, and a fixed-size box.
+\def\appendixentry#1#2#3{%
+  \dochapentry{\appendixbox{\putwordAppendix{} #2}\labelspace#1}{#3}}
 %
-\def\appendixbox#1{%
-  % We use M since it's probably the widest letter.
-  \setbox0 = \hbox{\putwordAppendix{} M}%
-  \hbox to \wd0{\putwordAppendix{} #1\hss}}
+% Appendices, in the short toc.
+\let\shortappendixentry = \shortchapentry
+
+% Typeset the label for a chapter or appendix for the short contents.
+% The arg is, e.g., `Appendix A' for an appendix, or `3' for a chapter.
+% We could simplify the code here by writing out an \appendixentry
+% command in the toc file for appendices, instead of using \chapentry
+% for both, but it doesn't seem worth it.
 %
-\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
+\newdimen\shortappendixwidth
+%
+\def\shortchaplabel#1{%
+  % This space should be enough, since a single number is .5em, and the
+  % widest letter (M) is 1em, at least in the Computer Modern fonts.
+  % But use \hss just in case.
+  % (This space doesn't include the extra space that gets added after
+  % the label; that gets put in by \shortchapentry above.)
+  \dimen0 = 1em
+  \hbox to \dimen0{#1\hss}%
+}
 
 % Unnumbered chapters.
-\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
-\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
+\def\unnumbchapentry#1#2#3{\dochapentry{#1}{#3}}
+\def\shortunnumberedentry#1#2#3{\tocentry{#1}{\doshortpageno\bgroup#3\egroup}}
 
 % Sections.
-\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
-\let\appsecentry=\numsecentry
-\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
+\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
+\def\unnumbsecentry#1#2#3#4{\dosecentry{#1}{#4}}
 
 % Subsections.
-\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
-\let\appsubsecentry=\numsubsecentry
-\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
+\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}}
+\def\unnumbsubsecentry#1#2#3#4#5{\dosubsecentry{#1}{#5}}
 
 % And subsubsections.
-\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
-\let\appsubsubsecentry=\numsubsubsecentry
-\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
+\def\subsubsecentry#1#2#3#4#5#6{%
+  \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
+\def\unnumbsubsubsecentry#1#2#3#4#5#6{\dosubsubsecentry{#1}{#6}}
 
 % This parameter controls the indentation of the various levels.
-% Same as \defaultparindent.
-\newdimen\tocindent \tocindent = 15pt
+\newdimen\tocindent \tocindent = 3pc
 
 % Now for the actual typesetting. In all these, #1 is the text and #2 is the
 % page number.
@@ -4680,8 +4400,17 @@ where each line of input produces a line of output.}
   \tocentry{#1}{\dopageno\bgroup#2\egroup}%
 \endgroup}
 
-% We use the same \entry macro as for the index entries.
-\let\tocentry = \entry
+% Final typesetting of a toc entry; we use the same \entry macro as for
+% the index entries, but we want to suppress hyphenation here.  (We
+% can't do that in the \entry macro, since index entries might consist
+% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
+\def\tocentry#1#2{\begingroup
+  \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
+  % Do not use \turnoffactive in these arguments.  Since the toc is
+  % typeset in cmr, characters such as _ would come out wrong; we
+  % have to do the usual translation tricks.
+  \entry{#1}{#2}%
+\endgroup}
 
 % Space between chapter (or whatever) number and the title.
 \def\labelspace{\hskip1em \relax}
@@ -4691,8 +4420,8 @@ where each line of input produces a line of output.}
 
 \def\chapentryfonts{\secfonts \rm}
 \def\secentryfonts{\textfonts}
-\def\subsecentryfonts{\textfonts}
-\def\subsubsecentryfonts{\textfonts}
+\let\subsecentryfonts = \textfonts
+\let\subsubsecentryfonts = \textfonts
 
 
 \message{environments,}
@@ -4719,10 +4448,10 @@ where each line of input produces a line of output.}
 % The text. (`r' is open on the right, `e' somewhat less so on the left.)
 \setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
 %
-\setbox\errorbox=\hbox to \dimen0{\hfil
+\global\setbox\errorbox=\hbox to \dimen0{\hfil
    \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
    \advance\hsize by -2\dimen2 % Rules.
-   \vbox{%
+   \vbox{
       \hrule height\dimen2
       \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
          \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
@@ -4736,13 +4465,14 @@ where each line of input produces a line of output.}
 % One exception: @ is still an escape character, so that @end tex works.
 % But \@ or @@ will get a plain tex @ character.
 
-\envdef\tex{%
+\def\tex{\begingroup
   \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
   \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
   \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
   \catcode `\%=14
   \catcode `\+=\other
   \catcode `\"=\other
+  \catcode `\==\other
   \catcode `\|=\other
   \catcode `\<=\other
   \catcode `\>=\other
@@ -4758,7 +4488,6 @@ where each line of input produces a line of output.}
   \let\!=\ptexexclam
   \let\i=\ptexi
   \let\indent=\ptexindent
-  \let\noindent=\ptexnoindent
   \let\{=\ptexlbrace
   \let\+=\tabalign
   \let\}=\ptexrbrace
@@ -4769,11 +4498,10 @@ where each line of input produces a line of output.}
   \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
   \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
   \def\@{@}%
-}
-% There is no need to define \Etex.
+\let\Etex=\endgroup}
 
 % Define @lisp ... @end lisp.
-% @lisp environment forms a group so it can rebind things,
+% @lisp does a \begingroup so it can rebind things,
 % including the definition of @end lisp (which normally is erroneous).
 
 % Amount to narrow the margins by for @lisp.
@@ -4784,6 +4512,19 @@ where each line of input produces a line of output.}
 % have any width.
 \def\lisppar{\null\endgraf}
 
+% Make each space character in the input produce a normal interword
+% space in the output.  Don't allow a line break at this space, as this
+% is used only in environments like @example, where each line of input
+% should produce a line of output anyway.
+%
+{\obeyspaces %
+\gdef\sepspaces{\obeyspaces\let =\tie}}
+
+% Define \obeyedspace to be our active space, whatever it is.  This is
+% for use in \parsearg.
+{\sepspaces%
+\global\let\obeyedspace= }
+
 % This space is always present above and below environments.
 \newskip\envskipamount \envskipamount = 0pt
 
@@ -4793,8 +4534,7 @@ where each line of input produces a line of output.}
 % start of the next paragraph will insert \parskip.
 %
 \def\aboveenvbreak{{%
-  % =10000 instead of <10000 because of a special case in \itemzzz and
-  % \sectionheading, q.v.
+  % =10000 instead of <10000 because of a special case in \itemzzz, q.v.
   \ifnum \lastpenalty=10000 \else
     \advance\envskipamount by \parskip
     \endgraf
@@ -4802,7 +4542,7 @@ where each line of input produces a line of output.}
       \removelastskip
       % it's not a good place to break if the last penalty was \nobreak
       % or better ...
-      \ifnum\lastpenalty<10000 \penalty-50 \fi
+      \ifnum\lastpenalty>10000 \else \penalty-50 \fi
       \vskip\envskipamount
     \fi
   \fi
@@ -4834,52 +4574,52 @@ where each line of input produces a line of output.}
 %
 \newskip\lskip\newskip\rskip
 
-\envdef\cartouche{%
-  \ifhmode\par\fi  % can't be in the midst of a paragraph.
-  \startsavinginserts
-  \lskip=\leftskip \rskip=\rightskip
-  \leftskip=0pt\rightskip=0pt % we want these *outside*.
-  \cartinner=\hsize \advance\cartinner by-\lskip
-  \advance\cartinner by-\rskip
-  \cartouter=\hsize
-  \advance\cartouter by 18.4pt	% allow for 3pt kerns on either
-				% side, and for 6pt waste from
-				% each corner char, and rule thickness
-  \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
-  % Flag to tell @lisp, etc., not to narrow margin.
-  \let\nonarrowing=\comment
-  \vbox\bgroup
-      \baselineskip=0pt\parskip=0pt\lineskip=0pt
-      \carttop
-      \hbox\bgroup
-	  \hskip\lskip
-	  \vrule\kern3pt
-	  \vbox\bgroup
-	      \kern3pt
-	      \hsize=\cartinner
-	      \baselineskip=\normbskip
-	      \lineskip=\normlskip
-	      \parskip=\normpskip
-	      \vskip -\parskip
-	      \comment % For explanation, see the end of \def\group.
-}
+\def\cartouche{%
+\par  % can't be in the midst of a paragraph.
+\begingroup
+        \lskip=\leftskip \rskip=\rightskip
+        \leftskip=0pt\rightskip=0pt %we want these *outside*.
+        \cartinner=\hsize \advance\cartinner by-\lskip
+                          \advance\cartinner by-\rskip
+        \cartouter=\hsize
+        \advance\cartouter by 18.4pt % allow for 3pt kerns on either
+%                                    side, and for 6pt waste from
+%                                    each corner char, and rule thickness
+        \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+        % Flag to tell @lisp, etc., not to narrow margin.
+        \let\nonarrowing=\comment
+        \vbox\bgroup
+                \baselineskip=0pt\parskip=0pt\lineskip=0pt
+                \carttop
+                \hbox\bgroup
+                        \hskip\lskip
+                        \vrule\kern3pt
+                        \vbox\bgroup
+                                \hsize=\cartinner
+                                \kern3pt
+                                \begingroup
+                                        \baselineskip=\normbskip
+                                        \lineskip=\normlskip
+                                        \parskip=\normpskip
+                                        \vskip -\parskip
 \def\Ecartouche{%
-              \ifhmode\par\fi
-	      \kern3pt
-	  \egroup
-	  \kern3pt\vrule
-	  \hskip\rskip
-      \egroup
-      \cartbot
-  \egroup
-  \checkinserts
-}
+                                \endgroup
+                                \kern3pt
+                        \egroup
+                        \kern3pt\vrule
+                        \hskip\rskip
+                \egroup
+                \cartbot
+        \egroup
+\endgroup
+}}
 
 
 % This macro is called at the beginning of all the @example variants,
 % inside a group.
 \def\nonfillstart{%
   \aboveenvbreak
+  \inENV % This group ends at the end of the body
   \hfuzz = 12pt % Don't be fussy
   \sepspaces % Make spaces be word-separators rather than space tokens.
   \let\par = \lisppar % don't ignore blank lines
@@ -4892,99 +4632,103 @@ where each line of input produces a line of output.}
   \ifx\nonarrowing\relax
     \advance \leftskip by \lispnarrowing
     \exdentamount=\lispnarrowing
+    \let\exdent=\nofillexdent
+    \let\nonarrowing=\relax
   \fi
-  \let\exdent=\nofillexdent
 }
 
-% If you want all examples etc. small: @set dispenvsize small.
-% If you want even small examples the full size: @set dispenvsize nosmall.
-% This affects the following displayed environments:
-%    @example, @display, @format, @lisp
+% Define the \E... control sequence only if we are inside the particular
+% environment, so the error checking in \end will work.
 %
-\def\smallword{small}
-\def\nosmallword{nosmall}
-\let\SETdispenvsize\relax
-\def\setnormaldispenv{%
-  \ifx\SETdispenvsize\smallword
-    \smallexamplefonts \rm
-  \fi
-}
-\def\setsmalldispenv{%
-  \ifx\SETdispenvsize\nosmallword
-  \else
-    \smallexamplefonts \rm
-  \fi
-}
+% To end an @example-like environment, we first end the paragraph (via
+% \afterenvbreak's vertical glue), and then the group.  That way we keep
+% the zero \parskip that the environments set -- \parskip glue will be
+% inserted at the beginning of the next paragraph in the document, after
+% the environment.
+%
+\def\nonfillfinish{\afterenvbreak\endgroup}
 
-% We often define two environments, @foo and @smallfoo.
-% Let's do it by one command:
-\def\makedispenv #1#2{
-  \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}
-  \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}
-  \expandafter\let\csname E#1\endcsname \afterenvbreak
-  \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
+% @lisp: indented, narrowed, typewriter font.
+\def\lisp{\begingroup
+  \nonfillstart
+  \let\Elisp = \nonfillfinish
+  \tt
+  \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
+  \gobble       % eat return
 }
 
-% Define two synonyms:
-\def\maketwodispenvs #1#2#3{
-  \makedispenv{#1}{#3}
-  \makedispenv{#2}{#3}
-}
+% @example: Same as @lisp.
+\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
 
-% @lisp: indented, narrowed, typewriter font; @example: same as @lisp.
-%
 % @smallexample and @smalllisp: use smaller fonts.
 % Originally contributed by Pavel@xerox.
-%
-\maketwodispenvs {lisp}{example}{%
-  \nonfillstart
-  \tt
-  \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
-  \gobble       % eat return
+\def\smalllisp{\begingroup
+  \def\Esmalllisp{\nonfillfinish\endgroup}%
+  \def\Esmallexample{\nonfillfinish\endgroup}%
+  \smallexamplefonts
+  \lisp
 }
+\let\smallexample = \smalllisp
 
-% @display/@smalldisplay: same as @lisp except keep current font.
+
+% @display: same as @lisp except keep current font.
 %
-\makedispenv {display}{%
+\def\display{\begingroup
   \nonfillstart
+  \let\Edisplay = \nonfillfinish
   \gobble
 }
-
-% @format/@smallformat: same as @display except don't narrow margins.
 %
-\makedispenv{format}{%
-  \let\nonarrowing = t%
-  \nonfillstart
-  \gobble
+% @smalldisplay: @display plus smaller fonts.
+%
+\def\smalldisplay{\begingroup
+  \def\Esmalldisplay{\nonfillfinish\endgroup}%
+  \smallexamplefonts \rm
+  \display
 }
 
-% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
-\envdef\flushleft{%
-  \let\nonarrowing = t%
+% @format: same as @display except don't narrow margins.
+%
+\def\format{\begingroup
+  \let\nonarrowing = t
   \nonfillstart
+  \let\Eformat = \nonfillfinish
   \gobble
 }
-\let\Eflushleft = \afterenvbreak
+%
+% @smallformat: @format plus smaller fonts.
+%
+\def\smallformat{\begingroup
+  \def\Esmallformat{\nonfillfinish\endgroup}%
+  \smallexamplefonts \rm
+  \format
+}
+
+% @flushleft (same as @format).
+%
+\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
 
 % @flushright.
 %
-\envdef\flushright{%
-  \let\nonarrowing = t%
+\def\flushright{\begingroup
+  \let\nonarrowing = t
   \nonfillstart
+  \let\Eflushright = \nonfillfinish
   \advance\leftskip by 0pt plus 1fill
   \gobble
 }
-\let\Eflushright = \afterenvbreak
 
 
 % @quotation does normal linebreaking (hence we can't use \nonfillstart)
-% and narrows the margins.  We keep \parskip nonzero in general, since
-% we're doing normal filling.  So, when using \aboveenvbreak and
-% \afterenvbreak, temporarily make \parskip 0.
+% and narrows the margins.
 %
-\envdef\quotation{%
+\def\quotation{%
+  \begingroup\inENV %This group ends at the end of the @quotation body
   {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
   \parindent=0pt
+  % We have retained a nonzero parskip for the environment, since we're
+  % doing normal filling. So to avoid extra space below the environment...
+  \def\Equotation{\parskip = 0pt \nonfillfinish}%
   %
   % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
   \ifx\nonarrowing\relax
@@ -4993,27 +4737,6 @@ where each line of input produces a line of output.}
     \exdentamount = \lispnarrowing
     \let\nonarrowing = \relax
   \fi
-  \parsearg\quotationlabel
-}
-
-% We have retained a nonzero parskip for the environment, since we're
-% doing normal filling.
-%
-\def\Equotation{%
-  \par
-  \ifx\quotationauthor\undefined\else
-    % indent a bit.
-    \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
-  \fi
-  {\parskip=0pt \afterenvbreak}%
-}
-
-% If we're given an argument, typeset it in bold with a colon after.
-\def\quotationlabel#1{%
-  \def\temp{#1}%
-  \ifx\temp\empty \else
-    {\bf #1: }%
-  \fi
 }
 
 
@@ -5035,7 +4758,7 @@ where each line of input produces a line of output.}
 %
 % [Knuth] p. 380
 \def\uncatcodespecials{%
-  \def\do##1{\catcode`##1=\other}\dospecials}
+  \def\do##1{\catcode`##1=12}\dospecials}
 %
 % [Knuth] pp. 380,381,391
 % Disable Spanish ligatures ?` and !` of \tt font
@@ -5083,8 +4806,6 @@ where each line of input produces a line of output.}
   }
 \endgroup
 \def\setupverbatim{%
-  \nonfillstart
-  \advance\leftskip by -\defbodyindent
   % Easiest (and conventionally used) font for verbatim
   \tt
   \def\par{\leavevmode\egroup\box0\endgraf}%
@@ -5106,7 +4827,7 @@ where each line of input produces a line of output.}
 %
 % [Knuth] p. 382; only eat outer {}
 \begingroup
-  \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
+  \catcode`[=1\catcode`]=2\catcode`\{=12\catcode`\}=12
   \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
 \endgroup
 %
@@ -5123,6 +4844,13 @@ where each line of input produces a line of output.}
 % we need not redefine '\', '{' and '}'.
 %
 % Inspired by LaTeX's verbatim command set [latex.ltx]
+%% Include LaTeX hack for completeness -- never know
+%% \begingroup
+%% \catcode`|=0 \catcode`[=1
+%% \catcode`]=2\catcode`\{=12\catcode`\}=12\catcode`\ =\active
+%% \catcode`\\=12|gdef|doverbatim#1@end verbatim[
+%% #1|endgroup|def|Everbatim[]|end[verbatim]]
+%% |endgroup
 %
 \begingroup
   \catcode`\ =\active
@@ -5130,32 +4858,54 @@ where each line of input produces a line of output.}
   % ignore everything up to the first ^^M, that's the newline at the end
   % of the @verbatim input line itself.  Otherwise we get an extra blank
   % line in the output.
-  \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
-  % We really want {...\end verbatim} in the body of the macro, but
-  % without the active space; thus we have to use \xdef and \gobble.
+  \gdef\doverbatim#1^^M#2@end verbatim{#2\end{verbatim}}%
 \endgroup
 %
-\envdef\verbatim{%
-    \setupverbatim\doverbatim
+\def\verbatim{%
+  \def\Everbatim{\nonfillfinish\endgroup}%
+  \begingroup
+    \nonfillstart
+    \advance\leftskip by -\defbodyindent
+    \begingroup\setupverbatim\doverbatim
 }
-\let\Everbatim = \afterenvbreak
-
 
 % @verbatiminclude FILE - insert text of file in verbatim environment.
 %
-\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
+% Allow normal characters that we make active in the argument (a file name).
+\def\verbatiminclude{%
+  \begingroup
+    \catcode`\\=\other
+    \catcode`~=\other
+    \catcode`^=\other
+    \catcode`_=\other
+    \catcode`|=\other
+    \catcode`<=\other
+    \catcode`>=\other
+    \catcode`+=\other
+    \parsearg\doverbatiminclude
+}
+\def\setupverbatiminclude{%
+  \begingroup
+    \nonfillstart
+    \advance\leftskip by -\defbodyindent
+    \begingroup\setupverbatim
+}
 %
 \def\doverbatiminclude#1{%
-  {%
-    \makevalueexpandable
-    \setupverbatim
-    \input #1
-    \afterenvbreak
-  }%
+     % Restore active chars for included file.
+  \endgroup
+  \begingroup
+    \let\value=\expandablevalue
+    \def\thisfile{#1}%
+    \expandafter\expandafter\setupverbatiminclude\input\thisfile
+  \endgroup
+  \nonfillfinish
+  \endgroup
 }
 
 % @copying ... @end copying.
-% Save the text away for @insertcopying later.
+% Save the text away for @insertcopying later.  Many commands won't be
+% allowed in this context, but that's ok.
 %
 % We save the uninterpreted tokens, rather than creating a box.
 % Saving the text in a box would be much easier, but then all the
@@ -5164,350 +4914,642 @@ where each line of input produces a line of output.}
 % file; b) letting users define the frontmatter in as flexible order as
 % possible is very desirable.
 %
-\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
-\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
-%
-\def\insertcopying{%
-  \begingroup
-    \parindent = 0pt  % paragraph indentation looks wrong on title page
-    \scanexp\copyingtext
-  \endgroup
+\def\copying{\begingroup
+  % Define a command to swallow text until we reach `@end copying'.
+  % \ is the escape char in this texinfo.tex file, so it is the
+  % delimiter for the command; @ will be the escape char when we read
+  % it, but that doesn't matter.
+  \long\def\docopying##1\end copying{\gdef\copyingtext{##1}\enddocopying}%
+  %
+  % We must preserve ^^M's in the input file; see \insertcopying below.
+  \catcode`\^^M = \active
+  \docopying
+}
+
+% What we do to finish off the copying text.
+%
+\def\enddocopying{\endgroup\ignorespaces}
+
+% @insertcopying.  Here we must play games with ^^M's.  On the one hand,
+% we need them to delimit commands such as `@end quotation', so they
+% must be active.  On the other hand, we certainly don't want every
+% end-of-line to be a \par, as would happen with the normal active
+% definition of ^^M.  On the third hand, two ^^M's in a row should still
+% generate a \par.
+%
+% Our approach is to make ^^M insert a space and a penalty1 normally;
+% then it can also check if \lastpenalty=1.  If it does, then manually
+% do \par.
+%
+% This messes up the normal definitions of @c[omment], so we redefine
+% it.  Similarly for @ignore.  (These commands are used in the gcc
+% manual for man page generation.)
+%
+% Seems pretty fragile, most line-oriented commands will presumably
+% fail, but for the limited use of getting the copying text (which
+% should be quite simple) inserted, we can hope it's ok.
+%
+{\catcode`\^^M=\active %
+\gdef\insertcopying{\begingroup %
+  \parindent = 0pt  % looks wrong on title page
+  \def^^M{%
+    \ifnum \lastpenalty=1 %
+      \par %
+    \else %
+      \space \penalty 1 %
+    \fi %
+  }%
+  %
+  % Fix @c[omment] for catcode 13 ^^M's.
+  \def\c##1^^M{\ignorespaces}%
+  \let\comment = \c %
+  %
+  % Don't bother jumping through all the hoops that \doignore does, it
+  % would be very hard since the catcodes are already set.
+  \long\def\ignore##1\end ignore{\ignorespaces}%
+  %
+  \copyingtext %
+\endgroup}%
 }
 
 \message{defuns,}
 % @defun etc.
 
+% Allow user to change definition object font (\df) internally
+\def\setdeffont#1 {\csname DEF#1\endcsname}
+
 \newskip\defbodyindent \defbodyindent=.4in
 \newskip\defargsindent \defargsindent=50pt
 \newskip\deflastargmargin \deflastargmargin=18pt
 
-% Start the processing of @deffn:
-\def\startdefun{%
-  \ifnum\lastpenalty<10000
-    \medbreak
+\newcount\parencount
+
+% We want ()&[] to print specially on the defun line.
+%
+\def\activeparens{%
+  \catcode`\(=\active \catcode`\)=\active
+  \catcode`\&=\active
+  \catcode`\[=\active \catcode`\]=\active
+}
+
+% Make control sequences which act like normal parenthesis chars.
+\let\lparen = ( \let\rparen = )
+
+{\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
+
+% Be sure that we always have a definition for `(', etc.  For example,
+% if the fn name has parens in it, \boldbrax will not be in effect yet,
+% so TeX would otherwise complain about undefined control sequence.
+\global\let(=\lparen \global\let)=\rparen
+\global\let[=\lbrack \global\let]=\rbrack
+
+\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
+\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+% This is used to turn on special parens
+% but make & act ordinary (given that it's active).
+\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
+
+% Definitions of (, ) and & used in args for functions.
+% This is the definition of ( outside of all parentheses.
+\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
+  \global\advance\parencount by 1
+}
+%
+% This is the definition of ( when already inside a level of parens.
+\gdef\opnested{\char`\(\global\advance\parencount by 1 }
+%
+\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
+  % also in that case restore the outer-level definition of (.
+  \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
+  \global\advance \parencount by -1 }
+% If we encounter &foo, then turn on ()-hacking afterwards
+\gdef\amprm#1 {{\rm\&#1}\let(=\oprm \let)=\clrm\ }
+%
+\gdef\normalparens{\boldbrax\let&=\ampnr}
+} % End of definition inside \activeparens
+%% These parens (in \boldbrax) actually are a little bolder than the
+%% contained text.  This is especially needed for [ and ]
+\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
+\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
+\let\ampnr = \&
+\def\lbrb{{\bf\char`\[}}
+\def\rbrb{{\bf\char`\]}}
+
+% Active &'s sneak into the index arguments, so make sure it's defined.
+{
+  \catcode`& = \active
+  \global\let& = \ampnr
+}
+
+% \defname, which formats the name of the @def (not the args).
+% #1 is the function name.
+% #2 is the type of definition, such as "Function".
+%
+\def\defname#1#2{%
+  % How we'll output the type name.  Putting it in brackets helps
+  % distinguish it from the body text that may end up on the next line
+  % just below it.
+  \ifempty{#2}%
+    \def\defnametype{}%
   \else
-    % If there are two @def commands in a row, we'll have a \nobreak,
-    % which is there to keep the function description together with its
-    % header.  But if there's nothing but headers, we need to allow a
-    % break somewhere.  Check specifically for penalty 10002, inserted
-    % by \defargscommonending, instead of 10000, since the sectioning
-    % commands also insert a nobreak penalty, and we don't want to allow
-    % a break between a section heading and a defun.
-    % 
-    \ifnum\lastpenalty=10002 \penalty2000 \fi
-    %
-    % Similarly, after a section heading, do not allow a break.
-    % But do insert the glue.
-    \medskip  % preceded by discardable penalty, so not a breakpoint
+    \def\defnametype{[\rm #2]}%
   \fi
   %
+  % Get the values of \leftskip and \rightskip as they were outside the @def...
+  \dimen2=\leftskip
+  \advance\dimen2 by -\defbodyindent
+  %
+  % Figure out values for the paragraph shape.
+  \setbox0=\hbox{\hskip \deflastargmargin{\defnametype}}%
+  \dimen0=\hsize \advance \dimen0 by -\wd0  % compute size for first line
+  \dimen1=\hsize \advance \dimen1 by -\defargsindent  % size for continuations
+  \parshape 2 0in \dimen0 \defargsindent \dimen1
+  %
+  % Output arg 2 ("Function" or some such) but stuck inside a box of
+  % width 0 so it does not interfere with linebreaking.
+  \noindent
+  %
+  {% Adjust \hsize to exclude the ambient margins,
+   % so that \rightline will obey them.
+   \advance \hsize by -\dimen2
+   \dimen3 = 0pt  % was -1.25pc
+   \rlap{\rightline{\defnametype\kern\dimen3}}%
+  }%
+  %
+  % Allow all lines to be underfull without complaint:
+  \tolerance=10000 \hbadness=10000
+  \advance\leftskip by -\defbodyindent
+  \exdentamount=\defbodyindent
+  {\df #1}\enskip        % output function name
+  % \defunargs will be called next to output the arguments, if any.
+}
+
+% Common pieces to start any @def...
+% #1 is the \E... control sequence to end the definition (which we define).
+% #2 is the \...x control sequence (which our caller defines).
+% #3 is the control sequence to process the header, such as \defunheader.
+%
+\def\parsebodycommon#1#2#3{%
+  \begingroup\inENV
+  % If there are two @def commands in a row, we'll have a \nobreak,
+  % which is there to keep the function description together with its
+  % header.  But if there's nothing but headers, we want to allow a
+  % break after all.  Check for penalty 10002 (inserted by
+  % \defargscommonending) instead of 10000, since the sectioning
+  % commands insert a \penalty10000, and we don't want to allow a break
+  % between a section heading and a defun.
+  \ifnum\lastpenalty=10002 \penalty0 \fi
+  \medbreak
+  %
+  % Define the \E... end token that this defining construct specifies
+  % so that it will exit this group.
+  \def#1{\endgraf\endgroup\medbreak}%
+  %
   \parindent=0in
   \advance\leftskip by \defbodyindent
   \exdentamount=\defbodyindent
 }
 
-\def\dodefunx#1{%
-  % First, check whether we are in the right environment:
-  \checkenv#1%
-  %
-  % As above, allow line break if we have multiple x headers in a row.
-  % It's not a great place, though.
-  \ifnum\lastpenalty=10002 \penalty3000 \fi
+% Common part of the \...x definitions.
+%
+\def\defxbodycommon{%
+  % As with \parsebodycommon above, allow line break if we have multiple
+  % x headers in a row.  It's not a great place, though.
+  \ifnum\lastpenalty=10000 \penalty1000 \fi
   %
-  % And now, it's time to reuse the body of the original defun:
-  \expandafter\gobbledefun#1%
+  \begingroup\obeylines
 }
-\def\gobbledefun#1\startdefun{}
 
-% \printdefunline \deffnheader{text}
+% Process body of @defun, @deffn, @defmac, etc.
 %
-\def\printdefunline#1#2{%
-  \begingroup
-    % call \deffnheader:
-    #1#2 \endheader
-    % common ending:
-    \interlinepenalty = 10000
-    \advance\rightskip by 0pt plus 1fil
-    \endgraf
-    \nobreak\vskip -\parskip
-    \penalty 10002  % signal to \startdefun and \dodefunx
-    % Some of the @defun-type tags do not enable magic parentheses,
-    % rendering the following check redundant.  But we don't optimize.
-    \checkparencounts
-  \endgroup
+\def\defparsebody#1#2#3{%
+  \parsebodycommon{#1}{#2}{#3}%
+  \def#2{\defxbodycommon \activeparens \spacesplit#3}%
+  \catcode\equalChar=\active
+  \begingroup\obeylines\activeparens
+  \spacesplit#3%
 }
 
-\def\Edefun{\endgraf\medbreak}
+% #1, #2, #3 are the common arguments (see \parsebodycommon above).
+% #4, delimited by the space, is the class name.
+%
+\def\defmethparsebody#1#2#3#4 {%
+  \parsebodycommon{#1}{#2}{#3}%
+  \def#2##1 {\defxbodycommon \activeparens \spacesplit{#3{##1}}}%
+  \begingroup\obeylines\activeparens
+  % The \empty here prevents misinterpretation of a construct such as
+  %   @deffn {whatever} {Enharmonic comma}
+  % See comments at \deftpparsebody, although in our case we don't have
+  % to remove the \empty afterwards, since it is empty.
+  \spacesplit{#3{#4}}\empty
+}
 
-% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
-% the only thing remainnig is to define \deffnheader.
+% Used for @deftypemethod and @deftypeivar.
+% #1, #2, #3 are the common arguments (see \defparsebody).
+% #4, delimited by a space, is the class name.
+% #5 is the method's return type.
 %
-\def\makedefun#1{%
-  \expandafter\let\csname E#1\endcsname = \Edefun
-  \edef\temp{\noexpand\domakedefun
-    \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
-  \temp
+\def\deftypemethparsebody#1#2#3#4 #5 {%
+  \parsebodycommon{#1}{#2}{#3}%
+  \def#2##1 ##2 {\defxbodycommon \activeparens \spacesplit{#3{##1}{##2}}}%
+  \begingroup\obeylines\activeparens
+  \spacesplit{#3{#4}{#5}}%
 }
 
-% \domakedefun \deffn \deffnx \deffnheader
+% Used for @deftypeop.  The change from \deftypemethparsebody is an
+% extra argument at the beginning which is the `category', instead of it
+% being the hardwired string `Method' or `Instance Variable'.  We have
+% to account for this both in the \...x definition and in parsing the
+% input at hand.  Thus also need a control sequence (passed as #5) for
+% the \E... definition to assign the category name to.
 %
-% Define \deffn and \deffnx, without parameters.
-% \deffnheader has to be defined explicitly.
+\def\deftypeopparsebody#1#2#3#4#5 #6 {%
+  \parsebodycommon{#1}{#2}{#3}%
+  \def#2##1 ##2 ##3 {\def#4{##1}%
+    \defxbodycommon \activeparens \spacesplit{#3{##2}{##3}}}%
+  \begingroup\obeylines\activeparens
+  \spacesplit{#3{#5}{#6}}%
+}
+
+% For @defop.
+\def\defopparsebody #1#2#3#4#5 {%
+  \parsebodycommon{#1}{#2}{#3}%
+  \def#2##1 ##2 {\def#4{##1}%
+    \defxbodycommon \activeparens \spacesplit{#3{##2}}}%
+  \begingroup\obeylines\activeparens
+  \spacesplit{#3{#5}}%
+}
+
+% These parsing functions are similar to the preceding ones
+% except that they do not make parens into active characters.
+% These are used for "variables" since they have no arguments.
 %
-\def\domakedefun#1#2#3{%
-  \envdef#1{%
-    \startdefun
-    \parseargusing\activeparens{\printdefunline#3}%
-  }%
-  \def#2{\dodefunx#1}%
-  \def#3%
+\def\defvarparsebody #1#2#3{%
+  \parsebodycommon{#1}{#2}{#3}%
+  \def#2{\defxbodycommon \spacesplit#3}%
+  \catcode\equalChar=\active
+  \begingroup\obeylines
+  \spacesplit#3%
 }
 
-%%% Untyped functions:
+% @defopvar.
+\def\defopvarparsebody #1#2#3#4#5 {%
+  \parsebodycommon{#1}{#2}{#3}%
+  \def#2##1 ##2 {\def#4{##1}%
+    \defxbodycommon \spacesplit{#3{##2}}}%
+  \begingroup\obeylines
+  \spacesplit{#3{#5}}%
+}
 
-% @deffn category name args
-\makedefun{deffn}{\deffngeneral{}}
+\def\defvrparsebody#1#2#3#4 {%
+  \parsebodycommon{#1}{#2}{#3}%
+  \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}%
+  \begingroup\obeylines
+  \spacesplit{#3{#4}}%
+}
 
-% @deffn category class name args
-\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
+% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the
+% type is just `struct', because we lose the braces in `{struct
+% termios}' when \spacesplit reads its undelimited argument.  Sigh.
+% \let\deftpparsebody=\defvrparsebody
+%
+% So, to get around this, we put \empty in with the type name.  That
+% way, TeX won't find exactly `{...}' as an undelimited argument, and
+% won't strip off the braces.
+%
+\def\deftpparsebody #1#2#3#4 {%
+  \parsebodycommon{#1}{#2}{#3}%
+  \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}%
+  \begingroup\obeylines
+  \spacesplit{\parsetpheaderline{#3{#4}}}\empty
+}
+
+% Fine, but then we have to eventually remove the \empty *and* the
+% braces (if any).  That's what this does.
+%
+\def\removeemptybraces\empty#1\relax{#1}
 
-% \defopon {category on}class name args
-\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+% After \spacesplit has done its work, this is called -- #1 is the final
+% thing to call, #2 the type name (which starts with \empty), and #3
+% (which might be empty) the arguments.
+%
+\def\parsetpheaderline#1#2#3{%
+  #1{\removeemptybraces#2\relax}{#3}%
+}%
 
-% \deffngeneral {subind}category name args
+% Split up #2 (the rest of the input line) at the first space token.
+% call #1 with two arguments:
+%  the first is all of #2 before the space token,
+%  the second is all of #2 after that space token.
+% If #2 contains no space token, all of it is passed as the first arg
+% and the second is passed as empty.
 %
-\def\deffngeneral#1#2 #3 #4\endheader{%
-  % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
-  \dosubind{fn}{\code{#3}}{#1}%
-  \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
+{\obeylines %
+ \gdef\spacesplit#1#2^^M{\endgroup\spacesplitx{#1}#2 \relax\spacesplitx}%
+ \long\gdef\spacesplitx#1#2 #3#4\spacesplitx{%
+   \ifx\relax #3%
+     #1{#2}{}%
+   \else %
+     #1{#2}{#3#4}%
+   \fi}%
 }
 
-%%% Typed functions:
+% Define @defun.
 
-% @deftypefn category type name args
-\makedefun{deftypefn}{\deftypefngeneral{}}
+% This is called to end the arguments processing for all the @def... commands.
+%
+\def\defargscommonending{%
+  \interlinepenalty = 10000
+  \advance\rightskip by 0pt plus 1fil
+  \endgraf
+  \nobreak\vskip -\parskip
+  \penalty 10002  % signal to \parsebodycommon.
+}
 
-% @deftypeop category class type name args
-\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
+% This expands the args and terminates the paragraph they comprise.
+%
+\def\defunargs#1{\functionparens \sl
+% Expand, preventing hyphenation at `-' chars.
+% Note that groups don't affect changes in \hyphenchar.
+% Set the font temporarily and use \font in case \setfont made \tensl a macro.
+{\tensl\hyphenchar\font=0}%
+#1%
+{\tensl\hyphenchar\font=45}%
+\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
+  \defargscommonending
+}
 
-% \deftypeopon {category on}class type name args
-\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+\def\deftypefunargs #1{%
+% Expand, preventing hyphenation at `-' chars.
+% Note that groups don't affect changes in \hyphenchar.
+% Use \boldbraxnoamp, not \functionparens, so that & is not special.
+\boldbraxnoamp
+\tclose{#1}% avoid \code because of side effects on active chars
+  \defargscommonending
+}
 
-% \deftypefngeneral {subind}category type name args
-%
-\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
-  \dosubind{fn}{\code{#4}}{#1}%
-  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+% Do complete processing of one @defun or @defunx line already parsed.
+
+% @deffn Command forward-char nchars
+
+\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
+
+\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
+\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
+\catcode\equalChar=\other % Turn off change made in \defparsebody
 }
 
-%%% Typed variables:
+% @defun == @deffn Function
 
-% @deftypevr category type var args
-\makedefun{deftypevr}{\deftypecvgeneral{}}
+\def\defun{\defparsebody\Edefun\defunx\defunheader}
 
-% @deftypecv category class type var args
-\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
+\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
+\begingroup\defname {#1}{\putwordDeffunc}%
+\defunargs {#2}\endgroup %
+\catcode\equalChar=\other % Turn off change made in \defparsebody
+}
 
-% \deftypecvof {category of}class type var args
-\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
+% @deftypefun int foobar (int @var{foo}, float @var{bar})
 
-% \deftypecvgeneral {subind}category type var args
-%
-\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
-  \dosubind{vr}{\code{#4}}{#1}%
-  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
+
+% #1 is the data type.  #2 is the name and args.
+\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
+% #1 is the data type, #2 the name, #3 the args.
+\def\deftypefunheaderx #1#2 #3\relax{%
+\doind {fn}{\code{#2}}% Make entry in function index
+\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypefun}%
+\deftypefunargs {#3}\endgroup %
+\catcode\equalChar=\other % Turn off change made in \defparsebody
 }
 
-%%% Untyped variables:
+% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
 
-% @defvr category var args
-\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
+\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
 
-% @defcv category class var args
-\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
+% \defheaderxcond#1\relax$.$
+% puts #1 in @code, followed by a space, but does nothing if #1 is null.
+\def\defheaderxcond#1#2$.${\ifx#1\relax\else\code{#1#2} \fi}
 
-% \defcvof {category of}class var args
-\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
+% #1 is the classification.  #2 is the data type.  #3 is the name and args.
+\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
+% #1 is the classification, #2 the data type, #3 the name, #4 the args.
+\def\deftypefnheaderx #1#2#3 #4\relax{%
+\doind {fn}{\code{#3}}% Make entry in function index
+\begingroup
+\normalparens % notably, turn off `&' magic, which prevents
+%               at least some C++ text from working
+\defname {\defheaderxcond#2\relax$.$#3}{#1}%
+\deftypefunargs {#4}\endgroup %
+\catcode\equalChar=\other % Turn off change made in \defparsebody
+}
+
+% @defmac == @deffn Macro
+
+\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
 
-%%% Type:
-% @deftp category name args
-\makedefun{deftp}#1 #2 #3\endheader{%
-  \doind{tp}{\code{#2}}%
-  \defname{#1}{}{#2}\defunargs{#3\unskip}%
+\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
+\begingroup\defname {#1}{\putwordDefmac}%
+\defunargs {#2}\endgroup %
+\catcode\equalChar=\other % Turn off change made in \defparsebody
 }
 
-% Remaining @defun-like shortcuts:
-\makedefun{defun}{\deffnheader{\putwordDeffunc} }
-\makedefun{defmac}{\deffnheader{\putwordDefmac} }
-\makedefun{defspec}{\deffnheader{\putwordDefspec} }
-\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
-\makedefun{defvar}{\defvrheader{\putwordDefvar} }
-\makedefun{defopt}{\defvrheader{\putwordDefopt} }
-\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
-\makedefun{defmethod}{\defopon\putwordMethodon}
-\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
-\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
-\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
+% @defspec == @deffn Special Form
 
-% \defname, which formats the name of the @def (not the args).
-% #1 is the category, such as "Function".
-% #2 is the return type, if any.
-% #3 is the function name.
+\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
+
+\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
+\begingroup\defname {#1}{\putwordDefspec}%
+\defunargs {#2}\endgroup %
+\catcode\equalChar=\other % Turn off change made in \defparsebody
+}
+
+% @defop CATEGORY CLASS OPERATION ARG...
 %
-% We are followed by (but not passed) the arguments, if any.
+\def\defop #1 {\def\defoptype{#1}%
+\defopparsebody\Edefop\defopx\defopheader\defoptype}
 %
-\def\defname#1#2#3{%
-  % Get the values of \leftskip and \rightskip as they were outside the @def...
-  \advance\leftskip by -\defbodyindent
-  %
-  % How we'll format the type name.  Putting it in brackets helps
-  % distinguish it from the body text that may end up on the next line
-  % just below it.
-  \def\temp{#1}%
-  \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
-  %
-  % Figure out line sizes for the paragraph shape.
-  % The first line needs space for \box0; but if \rightskip is nonzero,
-  % we need only space for the part of \box0 which exceeds it:
-  \dimen0=\hsize  \advance\dimen0 by -\wd0  \advance\dimen0 by \rightskip
-  % The continuations:
-  \dimen2=\hsize  \advance\dimen2 by -\defargsindent
-  % (plain.tex says that \dimen1 should be used only as global.)
-  \parshape 2 0in \dimen0 \defargsindent \dimen2
-  %
-  % Put the type name to the right margin.
-  \noindent
-  \hbox to 0pt{%
-    \hfil\box0 \kern-\hsize
-    % \hsize has to be shortened this way:
-    \kern\leftskip
-    % Intentionally do not respect \rightskip, since we need the space.
-  }%
-  %
-  % Allow all lines to be underfull without complaint:
-  \tolerance=10000 \hbadness=10000
-  \exdentamount=\defbodyindent
-  {%
-    % defun fonts. We use typewriter by default (used to be bold) because:
-    % . we're printing identifiers, they should be in tt in principle.
-    % . in languages with many accents, such as Czech or French, it's
-    %   common to leave accents off identifiers.  The result looks ok in
-    %   tt, but exceedingly strange in rm.
-    % . we don't want -- and --- to be treated as ligatures.
-    % . this still does not fix the ?` and !` ligatures, but so far no
-    %   one has made identifiers using them :).
-    \df \tt
-    \def\temp{#2}% return value type
-    \ifx\temp\empty\else \tclose{\temp} \fi
-    #3% output function name
-  }%
-  {\rm\enskip}% hskip 0.5 em of \tenrm
-  %
-  \boldbrax
-  % arguments will be output next, if any.
+\def\defopheader#1#2#3{%
+  \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% function index entry
+  \begingroup
+    \defname{#2}{\defoptype\ \putwordon\ #1}%
+    \defunargs{#3}%
+  \endgroup
 }
 
-% Print arguments in slanted roman (not ttsl), inconsistently with using
-% tt for the name.  This is because literal text is sometimes needed in
-% the argument list (groff manual), and ttsl and tt are not very
-% distinguishable.  Prevent hyphenation at `-' chars.
+% @deftypeop CATEGORY CLASS TYPE OPERATION ARG...
 %
-\def\defunargs#1{%
-  % use sl by default (not ttsl),
-  % tt for the names.
-  \df \sl \hyphenchar\font=0
-  %
-  % On the other hand, if an argument has two dashes (for instance), we
-  % want a way to get ttsl.  Let's try @var for that.
-  \let\var=\ttslanted
-  #1%
-  \sl\hyphenchar\font=45
+\def\deftypeop #1 {\def\deftypeopcategory{#1}%
+  \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader
+                       \deftypeopcategory}
+%
+% #1 is the class name, #2 the data type, #3 the operation name, #4 the args.
+\def\deftypeopheader#1#2#3#4{%
+  \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
+  \begingroup
+    \defname{\defheaderxcond#2\relax$.$#3}
+            {\deftypeopcategory\ \putwordon\ \code{#1}}%
+    \deftypefunargs{#4}%
+  \endgroup
 }
 
-% We want ()&[] to print specially on the defun line.
+% @deftypemethod CLASS TYPE METHOD ARG...
 %
-\def\activeparens{%
-  \catcode`\(=\active \catcode`\)=\active
-  \catcode`\[=\active \catcode`\]=\active
-  \catcode`\&=\active
+\def\deftypemethod{%
+  \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
+%
+% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
+\def\deftypemethodheader#1#2#3#4{%
+  \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
+  \begingroup
+    \defname{\defheaderxcond#2\relax$.$#3}{\putwordMethodon\ \code{#1}}%
+    \deftypefunargs{#4}%
+  \endgroup
 }
 
-% Make control sequences which act like normal parenthesis chars.
-\let\lparen = ( \let\rparen = )
-
-% Be sure that we always have a definition for `(', etc.  For example,
-% if the fn name has parens in it, \boldbrax will not be in effect yet,
-% so TeX would otherwise complain about undefined control sequence.
-{
-  \activeparens
-  \global\let(=\lparen \global\let)=\rparen
-  \global\let[=\lbrack \global\let]=\rbrack
-  \global\let& = \&
+% @deftypeivar CLASS TYPE VARNAME
+%
+\def\deftypeivar{%
+  \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader}
+%
+% #1 is the class name, #2 the data type, #3 the variable name.
+\def\deftypeivarheader#1#2#3{%
+  \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index
+  \begingroup
+    \defname{\defheaderxcond#2\relax$.$#3}
+            {\putwordInstanceVariableof\ \code{#1}}%
+    \defvarargs{#3}%
+  \endgroup
+}
 
-  \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
-  \gdef\magicamp{\let&=\amprm}
+% @defmethod == @defop Method
+%
+\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
+%
+% #1 is the class name, #2 the method name, #3 the args.
+\def\defmethodheader#1#2#3{%
+  \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
+  \begingroup
+    \defname{#2}{\putwordMethodon\ \code{#1}}%
+    \defunargs{#3}%
+  \endgroup
 }
 
-\newcount\parencount
+% @defcv {Class Option} foo-class foo-flag
 
-% If we encounter &foo, then turn on ()-hacking afterwards
-\newif\ifampseen
-\def\amprm#1 {\ampseentrue{\bf\&#1 }}
-
-\def\parenfont{%
-  \ifampseen
-    % At the first level, print parens in roman,
-    % otherwise use the default font.
-    \ifnum \parencount=1 \rm \fi
-  \else
-    % The \sf parens (in \boldbrax) actually are a little bolder than
-    % the contained text.  This is especially needed for [ and ] .
-    \sf
-  \fi
-}
-\def\infirstlevel#1{%
-  \ifampseen
-    \ifnum\parencount=1
-      #1%
-    \fi
-  \fi
-}
-\def\bfafterword#1 {#1 \bf}
+\def\defcv #1 {\def\defcvtype{#1}%
+\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
 
-\def\opnr{%
-  \global\advance\parencount by 1
-  {\parenfont(}%
-  \infirstlevel \bfafterword
-}
-\def\clnr{%
-  {\parenfont)}%
-  \infirstlevel \sl
-  \global\advance\parencount by -1
+\def\defcvarheader #1#2#3{%
+  \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% variable index entry
+  \begingroup
+    \defname{#2}{\defcvtype\ \putwordof\ #1}%
+    \defvarargs{#3}%
+  \endgroup
 }
 
-\newcount\brackcount
-\def\lbrb{%
-  \global\advance\brackcount by 1
-  {\bf[}%
-}
-\def\rbrb{%
-  {\bf]}%
-  \global\advance\brackcount by -1
+% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME
+%
+\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
+%
+\def\defivarheader#1#2#3{%
+  \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% entry in var index
+  \begingroup
+    \defname{#2}{\putwordInstanceVariableof\ #1}%
+    \defvarargs{#3}%
+  \endgroup
 }
 
-\def\checkparencounts{%
-  \ifnum\parencount=0 \else \badparencount \fi
-  \ifnum\brackcount=0 \else \badbrackcount \fi
+% @defvar
+% First, define the processing that is wanted for arguments of @defvar.
+% This is actually simple: just print them in roman.
+% This must expand the args and terminate the paragraph they make up
+\def\defvarargs #1{\normalparens #1%
+  \defargscommonending
 }
-\def\badparencount{%
-  \errmessage{Unbalanced parentheses in @def}%
-  \global\parencount=0
+
+% @defvr Counter foo-count
+
+\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
+
+\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
+\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
+
+% @defvar == @defvr Variable
+
+\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
+
+\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
+\begingroup\defname {#1}{\putwordDefvar}%
+\defvarargs {#2}\endgroup %
 }
-\def\badbrackcount{%
-  \errmessage{Unbalanced square braces in @def}%
-  \global\brackcount=0
+
+% @defopt == @defvr {User Option}
+
+\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
+
+\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
+\begingroup\defname {#1}{\putwordDefopt}%
+\defvarargs {#2}\endgroup %
 }
 
+% @deftypevar int foobar
+
+\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
+
+% #1 is the data type.  #2 is the name, perhaps followed by text that
+% is actually part of the data type, which should not be put into the index.
+\def\deftypevarheader #1#2{%
+\dovarind#2 \relax% Make entry in variables index
+\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypevar}%
+  \defargscommonending
+\endgroup}
+\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
+
+% @deftypevr {Global Flag} int enable
+
+\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
+
+\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
+\begingroup\defname {\defheaderxcond#2\relax$.$#3}{#1}
+  \defargscommonending
+\endgroup}
+
+% Now define @deftp
+% Args are printed in bold, a slight difference from @defvar.
+
+\def\deftpargs #1{\bf \defvarargs{#1}}
+
+% @deftp Class window height width ...
+
+\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
+
+\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
+\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
+
+% These definitions are used if you use @defunx (etc.)
+% anywhere other than immediately after a @defun or @defunx.
+%
+\def\defcvx#1 {\errmessage{@defcvx in invalid context}}
+\def\deffnx#1 {\errmessage{@deffnx in invalid context}}
+\def\defivarx#1 {\errmessage{@defivarx in invalid context}}
+\def\defmacx#1 {\errmessage{@defmacx in invalid context}}
+\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}}
+\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
+\def\defopx#1 {\errmessage{@defopx in invalid context}}
+\def\defspecx#1 {\errmessage{@defspecx in invalid context}}
+\def\deftpx#1 {\errmessage{@deftpx in invalid context}}
+\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}}
+\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}}
+\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}}
+\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}}
+\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}}
+\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}}
+\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}}
+\def\defunx#1 {\errmessage{@defunx in invalid context}}
+\def\defvarx#1 {\errmessage{@defvarx in invalid context}}
+\def\defvrx#1 {\errmessage{@defvrx in invalid context}}
+
 
 \message{macros,}
 % @macro.
@@ -5515,41 +5557,27 @@ where each line of input produces a line of output.}
 % To do this right we need a feature of e-TeX, \scantokens,
 % which we arrange to emulate with a temporary file in ordinary TeX.
 \ifx\eTeXversion\undefined
-  \newwrite\macscribble
-  \def\scantokens#1{%
-    \toks0={#1}%
-    \immediate\openout\macscribble=\jobname.tmp
-    \immediate\write\macscribble{\the\toks0}%
-    \immediate\closeout\macscribble
-    \input \jobname.tmp
-  }
-\fi
-
-\def\scanmacro#1{%
-  \begingroup
-    \newlinechar`\^^M
-    \let\xeatspaces\eatspaces
-    % Undo catcode changes of \startcontents and \doprintindex
-    % When called from @insertcopying or (short)caption, we need active
-    % backslash to get it printed correctly.  Previously, we had
-    % \catcode`\\=\other instead.  We'll see whether a problem appears
-    % with macro expansion.				--kasal, 19aug04
-    \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
-    % ... and \example
-    \spaceisspace
-    %
-    % Append \endinput to make sure that TeX does not see the ending newline.
-    %
-    % I've verified that it is necessary both for e-TeX and for ordinary TeX
-    %							--kasal, 29nov03
-    \scantokens{#1\endinput}%
-  \endgroup
-}
-
-\def\scanexp#1{%
-  \edef\temp{\noexpand\scanmacro{#1}}%
-  \temp
+ \newwrite\macscribble
+ \def\scanmacro#1{%
+   \begingroup \newlinechar`\^^M
+   % Undo catcode changes of \startcontents and \doprintindex
+   \catcode`\@=0 \catcode`\\=\other \escapechar=`\@
+   % Append \endinput to make sure that TeX does not see the ending newline.
+   \toks0={#1\endinput}%
+   \immediate\openout\macscribble=\jobname.tmp
+   \immediate\write\macscribble{\the\toks0}%
+   \immediate\closeout\macscribble
+   \let\xeatspaces\eatspaces
+   \input \jobname.tmp
+   \endgroup
 }
+\else
+\def\scanmacro#1{%
+\begingroup \newlinechar`\^^M
+% Undo catcode changes of \startcontents and \doprintindex
+\catcode`\@=0 \catcode`\\=\other \escapechar=`\@
+\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
+\fi
 
 \newcount\paramno   % Count of parameters
 \newtoks\macname    % Macro name
@@ -5558,15 +5586,13 @@ where each line of input produces a line of output.}
                     % \do\macro1\do\macro2...
 
 % Utility routines.
-% This does \let #1 = #2, with \csnames; that is,
-%   \let \csname#1\endcsname = \csname#2\endcsname
-% (except of course we have to play expansion games).
-% 
+% Thisdoes \let #1 = #2, except with \csnames.
 \def\cslet#1#2{%
-  \expandafter\let
-  \csname#1\expandafter\endcsname
-  \csname#2\endcsname
-}
+\expandafter\expandafter
+\expandafter\let
+\expandafter\expandafter
+\csname#1\endcsname
+\csname#2\endcsname}
 
 % Trim leading and trailing spaces off a string.
 % Concepts from aro-bend problem 15 (see CTAN).
@@ -5593,36 +5619,30 @@ where each line of input produces a line of output.}
 % done by  making ^^M (\endlinechar) catcode 12 when reading the macro
 % body, and then making it the \newlinechar in \scanmacro.
 
-\def\scanctxt{%
-  \catcode`\"=\other
-  \catcode`\+=\other
-  \catcode`\<=\other
-  \catcode`\>=\other
-  \catcode`\@=\other
+\def\macrobodyctxt{%
+  \catcode`\~=\other
   \catcode`\^=\other
   \catcode`\_=\other
   \catcode`\|=\other
-  \catcode`\~=\other
-}
-
-\def\scanargctxt{%
-  \scanctxt
-  \catcode`\\=\other
-  \catcode`\^^M=\other
-}
-
-\def\macrobodyctxt{%
-  \scanctxt
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\+=\other
   \catcode`\{=\other
   \catcode`\}=\other
+  \catcode`\@=\other
   \catcode`\^^M=\other
-  \usembodybackslash
-}
+  \usembodybackslash}
 
 \def\macroargctxt{%
-  \scanctxt
-  \catcode`\\=\other
-}
+  \catcode`\~=\other
+  \catcode`\^=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\+=\other
+  \catcode`\@=\other
+  \catcode`\\=\other}
 
 % \mbodybackslash is the definition of \ in @macro bodies.
 % It maps \foo\ => \csname macarg.foo\endcsname => #N
@@ -5663,7 +5683,8 @@ where each line of input produces a line of output.}
   \else \expandafter\parsemacbody
   \fi}
 
-\parseargdef\unmacro{%
+\def\unmacro{\parsearg\dounmacro}
+\def\dounmacro#1{%
   \if1\csname ismacro.#1\endcsname
     \global\cslet{#1}{macsave.#1}%
     \global\expandafter\let \csname ismacro.#1\endcsname=0%
@@ -5804,41 +5825,25 @@ where each line of input produces a line of output.}
     \expandafter\parsearg
   \fi \next}
 
-% We want to disable all macros during \shipout so that they are not
+% We mant to disable all macros during \shipout so that they are not
 % expanded by \write.
 \def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
   \edef\next{\macrolist}\expandafter\endgroup\next}
 
-% For \indexnofonts, we need to get rid of all macros, leaving only the
-% arguments (if present).  Of course this is not nearly correct, but it
-% is the best we can do for now.  makeinfo does not expand macros in the
-% argument to @deffn, which ends up writing an index entry, and texindex
-% isn't prepared for an index sort entry that starts with \.
-% 
-% Since macro invocations are followed by braces, we can just redefine them
-% to take a single TeX argument.  The case of a macro invocation that
-% goes to end-of-line is not handled.
-% 
-\def\emptyusermacros{\begingroup
-  \def\do##1{\let\noexpand##1=\noexpand\asis}%
-  \edef\next{\macrolist}\expandafter\endgroup\next}
-
 
 % @alias.
 % We need some trickery to remove the optional spaces around the equal
 % sign.  Just make them active and then expand them all to nothing.
-\def\alias{\parseargusing\obeyspaces\aliasxxx}
+\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
 \def\aliasxxx #1{\aliasyyy#1\relax}
-\def\aliasyyy #1=#2\relax{%
-  {%
-    \expandafter\let\obeyedspace=\empty
-    \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
-  }%
-  \next
-}
+\def\aliasyyy #1=#2\relax{\ignoreactivespaces
+\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
+           \expandafter\noexpand\csname#2\endcsname}%
+\expandafter\endgroup\next}
 
 
 \message{cross references,}
+% @xref etc.
 
 \newwrite\auxfile
 
@@ -5850,70 +5855,64 @@ where each line of input produces a line of output.}
 \def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
   node \samp{\ignorespaces#1{}}}
 
-% @node's only job in TeX is to define \lastnode, which is used in
-% cross-references.  The @node line might or might not have commas, and
-% might or might not have spaces before the first comma, like:
-% @node foo , bar , ...
-% We don't want such trailing spaces in the node name.
-%
-\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
-%
-% also remove a trailing comma, in case of something like this:
-% @node Help-Cross,  ,  , Cross-refs
-\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
-\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
-
+% @node's job is to define \lastnode.
+\def\node{\ENVcheck\parsearg\nodezzz}
+\def\nodezzz#1{\nodexxx #1,\finishnodeparse}
+\def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}}
 \let\nwnode=\node
-\let\lastnode=\empty
-
-% Write a cross-reference definition for the current node.  #1 is the
-% type (Ynumbered, Yappendix, Ynothing).
-%
-\def\donoderef#1{%
-  \ifx\lastnode\empty\else
-    \setref{\lastnode}{#1}%
-    \global\let\lastnode=\empty
+\let\lastnode=\relax
+
+% The sectioning commands (@chapter, etc.) call these.
+\def\donoderef{%
+  \ifx\lastnode\relax\else
+    \expandafter\expandafter\expandafter\setref{\lastnode}%
+      {Ysectionnumberandtype}%
+    \global\let\lastnode=\relax
+  \fi
+}
+\def\unnumbnoderef{%
+  \ifx\lastnode\relax\else
+    \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}%
+    \global\let\lastnode=\relax
   \fi
 }
+\def\appendixnoderef{%
+  \ifx\lastnode\relax\else
+    \expandafter\expandafter\expandafter\setref{\lastnode}%
+      {Yappendixletterandtype}%
+    \global\let\lastnode=\relax
+  \fi
+}
+
 
 % @anchor{NAME} -- define xref target at arbitrary point.
 %
 \newcount\savesfregister
-%
-\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
-\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
-\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
 
 % \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
-% anchor), which consists of three parts:
-% 1) NAME-title - the current sectioning name taken from \thissection,
-%                 or the anchor name.
-% 2) NAME-snt   - section number and type, passed as the SNT arg, or
-%                 empty for anchors.
-% 3) NAME-pg    - the page number.
-%
-% This is called from \donoderef, \anchor, and \dofloat.  In the case of
-% floats, there is an additional part, which is not written here:
-% 4) NAME-lof   - the text as it should appear in a @listoffloats.
-%
-\def\setref#1#2{%
+% anchor), namely NAME-title (the corresponding @chapter/etc. name),
+% NAME-pg (the page number), and NAME-snt (section number and type).
+% Called from \foonoderef.
+%
+% We have to set \indexdummies so commands such as @code in a section
+% title aren't expanded.  It would be nicer not to expand the titles in
+% the first place, but there's so many layers that that is hard to do.
+%
+% Likewise, use \turnoffactive so that punctuation chars such as underscore
+% and backslash work in node names.
+%
+\def\setref#1#2{{%
+  \atdummies
   \pdfmkdest{#1}%
-  \iflinks
-    {%
-      \atdummies  % preserve commands, but don't expand them
-      \turnoffactive
-      \otherbackslash
-      \edef\writexrdef##1##2{%
-	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
-	  ##1}{##2}}% these are parameters of \writexrdef
-      }%
-      \toks0 = \expandafter{\thissection}%
-      \immediate \writexrdef{title}{\the\toks0 }%
-      \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
-      \writexrdef{pg}{\folio}% will be written later, during \shipout
-    }%
-  \fi
-}
+  %
+  \turnoffactive
+  \dosetq{#1-title}{Ytitle}%
+  \dosetq{#1-pg}{Ypagenumber}%
+  \dosetq{#1-snt}{#2}%
+}}
 
 % @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
 % the node name, #2 the name of the Info cross-reference, #3 the printed
@@ -5926,33 +5925,38 @@ where each line of input produces a line of output.}
 \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
   \unsepspaces
   \def\printedmanual{\ignorespaces #5}%
-  \def\printedrefname{\ignorespaces #3}%
-  \setbox1=\hbox{\printedmanual\unskip}%
-  \setbox0=\hbox{\printedrefname\unskip}%
+  \def\printednodename{\ignorespaces #3}%
+  \setbox1=\hbox{\printedmanual}%
+  \setbox0=\hbox{\printednodename}%
   \ifdim \wd0 = 0pt
     % No printed node name was explicitly given.
     \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
       % Use the node name inside the square brackets.
-      \def\printedrefname{\ignorespaces #1}%
+      \def\printednodename{\ignorespaces #1}%
     \else
       % Use the actual chapter/section title appear inside
       % the square brackets.  Use the real section title if we have it.
       \ifdim \wd1 > 0pt
         % It is in another manual, so we don't have it.
-        \def\printedrefname{\ignorespaces #1}%
+        \def\printednodename{\ignorespaces #1}%
       \else
         \ifhavexrefs
           % We know the real title if we have the xref values.
-          \def\printedrefname{\refx{#1-title}{}}%
+          \def\printednodename{\refx{#1-title}{}}%
         \else
           % Otherwise just copy the Info node name.
-          \def\printedrefname{\ignorespaces #1}%
+          \def\printednodename{\ignorespaces #1}%
         \fi%
       \fi
     \fi
   \fi
   %
-  % Make link in pdf output.
+  % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
+  % insert empty discretionaries after hyphens, which means that it will
+  % not find a line break at a hyphen in a node names.  Since some manuals
+  % are best written with fairly long node names, containing hyphens, this
+  % is a loss.  Therefore, we give the text of the node name again, so it
+  % is as if TeX is seeing it for the first time.
   \ifpdf
     \leavevmode
     \getfilename{#4}%
@@ -5962,86 +5966,64 @@ where each line of input produces a line of output.}
          goto file{\the\filename.pdf} name{#1}%
      \else
        \startlink attr{/Border [0 0 0]}%
-         goto name{\pdfmkpgn{#1}}%
+         goto name{#1}%
      \fi
     }%
     \linkcolor
   \fi
   %
-  % Float references are printed completely differently: "Figure 1.2"
-  % instead of "[somenode], p.3".  We distinguish them by the
-  % LABEL-title being set to a magic string.
-  {%
-    % Have to otherify everything special to allow the \csname to
-    % include an _ in the xref name, etc.
-    \indexnofonts
-    \turnoffactive
-    \otherbackslash
-    \expandafter\global\expandafter\let\expandafter\Xthisreftitle
-      \csname XR#1-title\endcsname
-  }%
-  \iffloat\Xthisreftitle
-    % If the user specified the print name (third arg) to the ref,
-    % print it instead of our usual "Figure 1.2".
-    \ifdim\wd0 = 0pt
-      \refx{#1-snt}%
-    \else
-      \printedrefname
-    \fi
-    %
-    % if the user also gave the printed manual name (fifth arg), append
-    % "in MANUALNAME".
-    \ifdim \wd1 > 0pt
-      \space \putwordin{} \cite{\printedmanual}%
-    \fi
+  \ifdim \wd1 > 0pt
+    \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}%
   \else
-    % node/anchor (non-float) references.
+    % _ (for example) has to be the character _ for the purposes of the
+    % control sequence corresponding to the node, but it has to expand
+    % into the usual \leavevmode...\vrule stuff for purposes of
+    % printing. So we \turnoffactive for the \refx-snt, back on for the
+    % printing, back off for the \refx-pg.
+    {\turnoffactive \otherbackslash
+     % Only output a following space if the -snt ref is nonempty; for
+     % @unnumbered and @anchor, it won't be.
+     \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+     \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+    }%
+    % output the `[mynode]' via a macro.
+    \xrefprintnodename\printednodename
     %
-    % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
-    % insert empty discretionaries after hyphens, which means that it will
-    % not find a line break at a hyphen in a node names.  Since some manuals
-    % are best written with fairly long node names, containing hyphens, this
-    % is a loss.  Therefore, we give the text of the node name again, so it
-    % is as if TeX is seeing it for the first time.
-    \ifdim \wd1 > 0pt
-      \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
-    \else
-      % _ (for example) has to be the character _ for the purposes of the
-      % control sequence corresponding to the node, but it has to expand
-      % into the usual \leavevmode...\vrule stuff for purposes of
-      % printing. So we \turnoffactive for the \refx-snt, back on for the
-      % printing, back off for the \refx-pg.
-      {\turnoffactive \otherbackslash
-       % Only output a following space if the -snt ref is nonempty; for
-       % @unnumbered and @anchor, it won't be.
-       \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
-       \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
-      }%
-      % output the `[mynode]' via a macro so it can be overridden.
-      \xrefprintnodename\printedrefname
-      %
-      % But we always want a comma and a space:
-      ,\space
-      %
-      % output the `page 3'.
-      \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}%
-    \fi
+    % But we always want a comma and a space:
+    ,\space
+    %
+    % output the `page 3'.
+    \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}%
   \fi
   \endlink
 \endgroup}
 
 % This macro is called from \xrefX for the `[nodename]' part of xref
 % output.  It's a separate macro only so it can be changed more easily,
-% since square brackets don't work well in some documents.  Particularly
+% since not square brackets don't work in some documents.  Particularly
 % one that Bob is working on :).
 %
 \def\xrefprintnodename#1{[#1]}
 
-% Things referred to by \setref.
+% \dosetq is called from \setref to do the actual \write (\iflinks).
+%
+\def\dosetq#1#2{%
+  {\let\folio=0%
+   \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
+   \iflinks \next \fi
+  }%
+}
+
+% \internalsetq{foo}{page} expands into
+%   CHARACTERS @xrdef{foo}{...expansion of \page...}
+\def\internalsetq#1#2{@xrdef{#1}{\csname #2\endcsname}}
+
+% Things to be expanded by \internalsetq.
 %
+\def\Ypagenumber{\folio}
+\def\Ytitle{\thissection}
 \def\Ynothing{}
-\def\Yomitfromtoc{}
-\def\Ynumbered{%
+\def\Ysectionnumberandtype{%
   \ifnum\secno=0
     \putwordChapter@tie \the\chapno
   \else \ifnum\subsecno=0
@@ -6052,7 +6034,8 @@ where each line of input produces a line of output.}
     \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
   \fi\fi\fi
 }
-\def\Yappendix{%
+
+\def\Yappendixletterandtype{%
   \ifnum\secno=0
      \putwordAppendix@tie @char\the\appendixno{}%
   \else \ifnum\subsecno=0
@@ -6065,6 +6048,15 @@ where each line of input produces a line of output.}
   \fi\fi\fi
 }
 
+% Use TeX 3.0's \inputlineno to get the line number, for better error
+% messages, but if we're using an old version of TeX, don't do anything.
+%
+\ifx\inputlineno\thisisundefined
+  \let\linenumber = \empty % Pre-3.0.
+\else
+  \def\linenumber{\the\inputlineno:\space}
+\fi
+
 % Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
 % If its value is nonempty, SUFFIX is output afterward.
 %
@@ -6073,7 +6065,7 @@ where each line of input produces a line of output.}
     \indexnofonts
     \otherbackslash
     \expandafter\global\expandafter\let\expandafter\thisrefX
-      \csname XR#1\endcsname
+      \csname X#1\endcsname
   }%
   \ifx\thisrefX\relax
     % If not defined, say something at least.
@@ -6095,44 +6087,11 @@ where each line of input produces a line of output.}
   #2% Output the suffix in any case.
 }
 
-% This is the macro invoked by entries in the aux file.  Usually it's
-% just a \def (we prepend XR to the control sequence name to avoid
-% collisions).  But if this is a float type, we have more work to do.
+% This is the macro invoked by entries in the aux file.
 %
-\def\xrdef#1#2{%
-  \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value.
-  %
-  % Was that xref control sequence that we just defined for a float?
-  \expandafter\iffloat\csname XR#1\endcsname
-    % it was a float, and we have the (safe) float type in \iffloattype.
-    \expandafter\let\expandafter\floatlist
-      \csname floatlist\iffloattype\endcsname
-    %
-    % Is this the first time we've seen this float type?
-    \expandafter\ifx\floatlist\relax
-      \toks0 = {\do}% yes, so just \do
-    \else
-      % had it before, so preserve previous elements in list.
-      \toks0 = \expandafter{\floatlist\do}%
-    \fi
-    %
-    % Remember this xref in the control sequence \floatlistFLOATTYPE,
-    % for later use in \listoffloats.
-    \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}%
-  \fi
-}
+\def\xrdef#1{\expandafter\gdef\csname X#1\endcsname}
 
 % Read the last existing aux file, if any.  No error if none exists.
-%
-\def\tryauxfile{%
-  \openin 1 \jobname.aux
-  \ifeof 1 \else
-    \readauxfile
-    \global\havexrefstrue
-  \fi
-  \closein 1
-}
-
 \def\readauxfile{\begingroup
   \catcode`\^^@=\other
   \catcode`\^^A=\other
@@ -6191,16 +6150,7 @@ where each line of input produces a line of output.}
   \catcode`\%=\other
   \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
   %
-  % This is to support \ in node names and titles, since the \
-  % characters end up in a \csname.  It's easier than
-  % leaving it active and making its active definition an actual \
-  % character.  What I don't understand is why it works in the *value*
-  % of the xrdef.  Seems like it should be a catcode12 \, and that
-  % should not typeset properly.  But it works, so I'm moving on for
-  % now.  --karl, 15jan04.
-  \catcode`\\=\other
-  %
-  % Make the characters 128-255 be printing characters.
+  % Make the characters 128-255 be printing characters
   {%
     \count 1=128
     \def\loop{%
@@ -6210,17 +6160,31 @@ where each line of input produces a line of output.}
     }%
   }%
   %
-  % @ is our escape character in .aux files, and we need braces.
+  % Turn off \ as an escape so we do not lose on
+  % entries which were dumped with control sequences in their names.
+  % For example, @xrdef{$\leq $-fun}{page ...} made by @defun ^^
+  % Reference to such entries still does not work the way one would wish,
+  % but at least they do not bomb out when the aux file is read in.
+  \catcode`\\=\other
+  %
+  % @ is our escape character in .aux files.
   \catcode`\{=1
   \catcode`\}=2
   \catcode`\@=0
   %
-  \input \jobname.aux
+  \openin 1 \jobname.aux
+  \ifeof 1 \else
+    \closein 1
+    \input \jobname.aux
+    \global\havexrefstrue
+    \global\warnedobstrue
+  \fi
+  % Open the new aux file.  TeX will close it automatically at exit.
+  \openout\auxfile=\jobname.aux
 \endgroup}
 
 
-\message{insertions,}
-% including footnotes.
+% Footnotes.
 
 \newcount \footnoteno
 
@@ -6234,12 +6198,13 @@ where each line of input produces a line of output.}
 % @footnotestyle is meaningful for info output only.
 \let\footnotestyle=\comment
 
+\let\ptexfootnote=\footnote
+
 {\catcode `\@=11
 %
 % Auto-number footnotes.  Otherwise like plain.
 \gdef\footnote{%
   \let\indent=\ptexindent
-  \let\noindent=\ptexnoindent
   \global\advance\footnoteno by \@ne
   \edef\thisfootno{$^{\the\footnoteno}$}%
   %
@@ -6257,12 +6222,17 @@ where each line of input produces a line of output.}
 % Don't bother with the trickery in plain.tex to not require the
 % footnote text as a parameter.  Our footnotes don't need to be so general.
 %
-% Oh yes, they do; otherwise, @ifset (and anything else that uses
-% \parseargline) fails inside footnotes because the tokens are fixed when
+% Oh yes, they do; otherwise, @ifset and anything else that uses
+% \parseargline fail inside footnotes because the tokens are fixed when
 % the footnote is read.  --karl, 16nov96.
 %
+% The start of the footnote looks usually like this:
+\gdef\startfootins{\insert\footins\bgroup}
+%
+% ... but this macro is redefined inside @multitable.
+%
 \gdef\dofootnote{%
-  \insert\footins\bgroup
+  \startfootins
   % We want to typeset this text as a normal paragraph, even if the
   % footnote reference occurs in (for example) a display environment.
   % So reset some parameters.
@@ -6298,66 +6268,40 @@ where each line of input produces a line of output.}
 }
 }%end \catcode `\@=11
 
-% In case a @footnote appears in a vbox, save the footnote text and create
-% the real \insert just after the vbox finished.  Otherwise, the insertion
-% would be lost.
-% Similarily, if a @footnote appears inside an alignment, save the footnote
-% text to a box and make the \insert when a row of the table is finished.
-% And the same can be done for other insert classes.  --kasal, 16nov03.
-
-% Replace the \insert primitive by a cheating macro.
-% Deeper inside, just make sure that the saved insertions are not spilled
-% out prematurely.
+% @| inserts a changebar to the left of the current line.  It should
+% surround any changed text.  This approach does *not* work if the
+% change spans more than two lines of output.  To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).
 %
-\def\startsavinginserts{%
-  \ifx \insert\ptexinsert
-    \let\insert\saveinsert
-  \else
-    \let\checkinserts\relax
-  \fi
+\def\|{%
+  % \vadjust can only be used in horizontal mode.
+  \leavevmode
+  %
+  % Append this vertical mode material after the current line in the output.
+  \vadjust{%
+    % We want to insert a rule with the height and depth of the current
+    % leading; that is exactly what \strutbox is supposed to record.
+    \vskip-\baselineskip
+    %
+    % \vadjust-items are inserted at the left edge of the type.  So
+    % the \llap here moves out into the left-hand margin.
+    \llap{%
+      %
+      % For a thicker or thinner bar, change the `1pt'.
+      \vrule height\baselineskip width1pt
+      %
+      % This is the space between the bar and the text.
+      \hskip 12pt
+    }%
+  }%
 }
 
-% This \insert replacement works for both \insert\footins{foo} and
-% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
 %
-\def\saveinsert#1{%
-  \edef\next{\noexpand\savetobox \makeSAVEname#1}%
-  \afterassignment\next
-  % swallow the left brace
-  \let\temp =
-}
-\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
-\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
-
-\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
-
-\def\placesaveins#1{%
-  \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
-    {\box#1}%
-}
-
-% eat @SAVE -- beware, all of them have catcode \other:
-{
-  \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials  %  ;-)
-  \gdef\gobblesave @SAVE{}
-}
-
-% initialization:
-\def\newsaveins #1{%
-  \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
-  \next
-}
-\def\newsaveinsX #1{%
-  \csname newbox\endcsname #1%
-  \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
-    \checksaveins #1}%
-}
-
-% initialize:
-\let\checkinserts\empty
-\newsaveins\footins
-\newsaveins\margin
-
+\def\finalout{\overfullrule=0pt}
 
 % @image.  We use the macros from epsf.tex to support this.
 % If epsf.tex is not installed and @image is used, we complain.
@@ -6367,12 +6311,12 @@ where each line of input produces a line of output.}
 % undone and the next image would fail.
 \openin 1 = epsf.tex
 \ifeof 1 \else
+  \closein 1
   % Do not bother showing banner with epsf.tex v2.7k (available in
   % doc/epsf.tex and on ctan).
   \def\epsfannounce{\toks0 = }%
   \input epsf.tex
 \fi
-\closein 1
 %
 % We will only complain once about lack of epsf.tex.
 \newif\ifwarnednoepsf
@@ -6428,269 +6372,6 @@ where each line of input produces a line of output.}
 \endgroup}
 
 
-% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
-% etc.  We don't actually implement floating yet, we always include the
-% float "here".  But it seemed the best name for the future.
-%
-\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
-
-% There may be a space before second and/or third parameter; delete it.
-\def\eatcommaspace#1, {#1,}
-
-% #1 is the optional FLOATTYPE, the text label for this float, typically
-% "Figure", "Table", "Example", etc.  Can't contain commas.  If omitted,
-% this float will not be numbered and cannot be referred to.
-%
-% #2 is the optional xref label.  Also must be present for the float to
-% be referable.
-%
-% #3 is the optional positioning argument; for now, it is ignored.  It
-% will somehow specify the positions allowed to float to (here, top, bottom).
-%
-% We keep a separate counter for each FLOATTYPE, which we reset at each
-% chapter-level command.
-\let\resetallfloatnos=\empty
-%
-\def\dofloat#1,#2,#3,#4\finish{%
-  \let\thiscaption=\empty
-  \let\thisshortcaption=\empty
-  %
-  % don't lose footnotes inside @float.
-  %
-  % BEWARE: when the floats start float, we have to issue warning whenever an
-  % insert appears inside a float which could possibly float. --kasal, 26may04
-  %
-  \startsavinginserts
-  %
-  % We can't be used inside a paragraph.
-  \par
-  %
-  \vtop\bgroup
-    \def\floattype{#1}%
-    \def\floatlabel{#2}%
-    \def\floatloc{#3}% we do nothing with this yet.
-    %
-    \ifx\floattype\empty
-      \let\safefloattype=\empty
-    \else
-      {%
-        % the floattype might have accents or other special characters,
-        % but we need to use it in a control sequence name.
-        \indexnofonts
-        \turnoffactive
-        \xdef\safefloattype{\floattype}%
-      }%
-    \fi
-    %
-    % If label is given but no type, we handle that as the empty type.
-    \ifx\floatlabel\empty \else
-      % We want each FLOATTYPE to be numbered separately (Figure 1,
-      % Table 1, Figure 2, ...).  (And if no label, no number.)
-      %
-      \expandafter\getfloatno\csname\safefloattype floatno\endcsname
-      \global\advance\floatno by 1
-      %
-      {%
-        % This magic value for \thissection is output by \setref as the
-        % XREFLABEL-title value.  \xrefX uses it to distinguish float
-        % labels (which have a completely different output format) from
-        % node and anchor labels.  And \xrdef uses it to construct the
-        % lists of floats.
-        %
-        \edef\thissection{\floatmagic=\safefloattype}%
-        \setref{\floatlabel}{Yfloat}%
-      }%
-    \fi
-    %
-    % start with \parskip glue, I guess.
-    \vskip\parskip
-    %
-    % Don't suppress indentation if a float happens to start a section.
-    \restorefirstparagraphindent
-}
-
-% we have these possibilities:
-% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
-% @float Foo,lbl & no caption:    Foo 1.1
-% @float Foo & @caption{Cap}:     Foo: Cap
-% @float Foo & no caption:        Foo
-% @float ,lbl & Caption{Cap}:     1.1: Cap
-% @float ,lbl & no caption:       1.1
-% @float & @caption{Cap}:         Cap
-% @float & no caption:
-%
-\def\Efloat{%
-    \let\floatident = \empty
-    %
-    % In all cases, if we have a float type, it comes first.
-    \ifx\floattype\empty \else \def\floatident{\floattype}\fi
-    %
-    % If we have an xref label, the number comes next.
-    \ifx\floatlabel\empty \else
-      \ifx\floattype\empty \else % if also had float type, need tie first.
-        \appendtomacro\floatident{\tie}%
-      \fi
-      % the number.
-      \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
-    \fi
-    %
-    % Start the printed caption with what we've constructed in
-    % \floatident, but keep it separate; we need \floatident again.
-    \let\captionline = \floatident
-    %
-    \ifx\thiscaption\empty \else
-      \ifx\floatident\empty \else
-	\appendtomacro\captionline{: }% had ident, so need a colon between
-      \fi
-      %
-      % caption text.
-      \appendtomacro\captionline{\scanexp\thiscaption}%
-    \fi
-    %
-    % If we have anything to print, print it, with space before.
-    % Eventually this needs to become an \insert.
-    \ifx\captionline\empty \else
-      \vskip.5\parskip
-      \captionline
-      %
-      % Space below caption.
-      \vskip\parskip
-    \fi
-    %
-    % If have an xref label, write the list of floats info.  Do this
-    % after the caption, to avoid chance of it being a breakpoint.
-    \ifx\floatlabel\empty \else
-      % Write the text that goes in the lof to the aux file as
-      % \floatlabel-lof.  Besides \floatident, we include the short
-      % caption if specified, else the full caption if specified, else nothing.
-      {%
-        \atdummies \turnoffactive \otherbackslash
-        % since we read the caption text in the macro world, where ^^M
-        % is turned into a normal character, we have to scan it back, so
-        % we don't write the literal three characters "^^M" into the aux file.
-	\scanexp{%
-	  \xdef\noexpand\gtemp{%
-	    \ifx\thisshortcaption\empty
-	      \thiscaption
-	    \else
-	      \thisshortcaption
-	    \fi
-	  }%
-	}%
-        \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
-	  \ifx\gtemp\empty \else : \gtemp \fi}}%
-      }%
-    \fi
-  \egroup  % end of \vtop
-  %
-  % place the captured inserts
-  %
-  % BEWARE: when the floats start float, we have to issue warning whenever an
-  % insert appears inside a float which could possibly float. --kasal, 26may04
-  %
-  \checkinserts
-}
-
-% Append the tokens #2 to the definition of macro #1, not expanding either.
-%
-\def\appendtomacro#1#2{%
-  \expandafter\def\expandafter#1\expandafter{#1#2}%
-}
-
-% @caption, @shortcaption
-%
-\def\caption{\docaption\thiscaption}
-\def\shortcaption{\docaption\thisshortcaption}
-\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
-\def\defcaption#1#2{\egroup \def#1{#2}}
-
-% The parameter is the control sequence identifying the counter we are
-% going to use.  Create it if it doesn't exist and assign it to \floatno.
-\def\getfloatno#1{%
-  \ifx#1\relax
-      % Haven't seen this figure type before.
-      \csname newcount\endcsname #1%
-      %
-      % Remember to reset this floatno at the next chap.
-      \expandafter\gdef\expandafter\resetallfloatnos
-        \expandafter{\resetallfloatnos #1=0 }%
-  \fi
-  \let\floatno#1%
-}
-
-% \setref calls this to get the XREFLABEL-snt value.  We want an @xref
-% to the FLOATLABEL to expand to "Figure 3.1".  We call \setref when we
-% first read the @float command.
-%
-\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
-
-% Magic string used for the XREFLABEL-title value, so \xrefX can
-% distinguish floats from other xref types.
-\def\floatmagic{!!float!!}
-
-% #1 is the control sequence we are passed; we expand into a conditional
-% which is true if #1 represents a float ref.  That is, the magic
-% \thissection value which we \setref above.
-%
-\def\iffloat#1{\expandafter\doiffloat#1==\finish}
-%
-% #1 is (maybe) the \floatmagic string.  If so, #2 will be the
-% (safe) float type for this float.  We set \iffloattype to #2.
-%
-\def\doiffloat#1=#2=#3\finish{%
-  \def\temp{#1}%
-  \def\iffloattype{#2}%
-  \ifx\temp\floatmagic
-}
-
-% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
-%
-\parseargdef\listoffloats{%
-  \def\floattype{#1}% floattype
-  {%
-    % the floattype might have accents or other special characters,
-    % but we need to use it in a control sequence name.
-    \indexnofonts
-    \turnoffactive
-    \xdef\safefloattype{\floattype}%
-  }%
-  %
-  % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
-  \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
-    \ifhavexrefs
-      % if the user said @listoffloats foo but never @float foo.
-      \message{\linenumber No `\safefloattype' floats to list.}%
-    \fi
-  \else
-    \begingroup
-      \leftskip=\tocindent  % indent these entries like a toc
-      \let\do=\listoffloatsdo
-      \csname floatlist\safefloattype\endcsname
-    \endgroup
-  \fi
-}
-
-% This is called on each entry in a list of floats.  We're passed the
-% xref label, in the form LABEL-title, which is how we save it in the
-% aux file.  We strip off the -title and look up \XRLABEL-lof, which
-% has the text we're supposed to typeset here.
-%
-% Figures without xref labels will not be included in the list (since
-% they won't appear in the aux file).
-%
-\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
-\def\listoffloatsdoentry#1-title\finish{{%
-  % Can't fully expand XR#1-lof because it can contain anything.  Just
-  % pass the control sequence.  On the other hand, XR#1-pg is just the
-  % page number, and we want to fully expand that so we can get a link
-  % in pdf output.
-  \toksA = \expandafter{\csname XR#1-lof\endcsname}%
-  %
-  % use the same \entry macro we use to generate the TOC and index.
-  \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
-  \writeentry
-}}
-
 \message{localization,}
 % and i18n.
 
@@ -6699,17 +6380,19 @@ where each line of input produces a line of output.}
 % properly.  Single argument is the language abbreviation.
 % It would be nice if we could set up a hyphenation file here.
 %
-\parseargdef\documentlanguage{%
+\def\documentlanguage{\parsearg\dodocumentlanguage}
+\def\dodocumentlanguage#1{%
   \tex % read txi-??.tex file in plain TeX.
-    % Read the file if it exists.
-    \openin 1 txi-#1.tex
-    \ifeof 1
-      \errhelp = \nolanghelp
-      \errmessage{Cannot read language file txi-#1.tex}%
-    \else
-      \input txi-#1.tex
-    \fi
-    \closein 1
+  % Read the file if it exists.
+  \openin 1 txi-#1.tex
+  \ifeof1
+    \errhelp = \nolanghelp
+    \errmessage{Cannot read language file txi-#1.tex}%
+    \let\temp = \relax
+  \else
+    \def\temp{\input txi-#1.tex }%
+  \fi
+  \temp
   \endgroup
 }
 \newhelp\nolanghelp{The given language definition file cannot be found or
@@ -6892,7 +6575,8 @@ should work if nowhere else does.}
 % Perhaps we should allow setting the margins, \topskip, \parskip,
 % and/or leading, also. Or perhaps we should compute them somehow.
 %
-\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
+\def\pagesizes{\parsearg\pagesizesxxx}
+\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
 \def\pagesizesyyy#1,#2,#3\finish{{%
   \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
   \globaldefs = 1
@@ -6939,8 +6623,8 @@ should work if nowhere else does.}
 \def\normalplus{+}
 \def\normaldollar{$}%$ font-lock fix
 
-% This macro is used to make a character print one way in \tt
-% (where it can probably be output as-is), and another way in other fonts,
+% This macro is used to make a character print one way in ttfont
+% where it can probably just be output, and another way in other fonts,
 % where something hairier probably needs to be done.
 %
 % #1 is what to print if we are indeed using \tt; #2 is what to print
@@ -6988,6 +6672,13 @@ should work if nowhere else does.}
 \catcode`\$=\active
 \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
 
+% Set up an active definition for =, but don't enable it most of the time.
+{\catcode`\==\active
+\global\def={{\tt \char 61}}}
+
+\catcode`+=\active
+\catcode`\_=\active
+
 % If a .fmt file is being used, characters that might appear in a file
 % name cannot be active until we have parsed the command line.
 % So turn them off again, and have \everyjob (or @setfilename) turn them on.
@@ -6996,16 +6687,15 @@ should work if nowhere else does.}
 
 \catcode`\@=0
 
-% \backslashcurfont outputs one backslash character in current font,
+% \rawbackslashxx outputs one backslash character in current font,
 % as in \char`\\.
-\global\chardef\backslashcurfont=`\\
-\global\let\rawbackslashxx=\backslashcurfont  % let existing .??s files work
+\global\chardef\rawbackslashxx=`\\
 
-% \rawbackslash defines an active \ to do \backslashcurfont.
+% \rawbackslash defines an active \ to do \rawbackslashxx.
 % \otherbackslash defines an active \ to be a literal `\' character with
 % catcode other.
 {\catcode`\\=\active
- @gdef@rawbackslash{@let\=@backslashcurfont}
+ @gdef@rawbackslash{@let\=@rawbackslashxx}
  @gdef@otherbackslash{@let\=@realbackslash}
 }
 
@@ -7013,7 +6703,7 @@ should work if nowhere else does.}
 {\catcode`\\=\other @gdef@realbackslash{\}}
 
 % \normalbackslash outputs one backslash in fixed width font.
-\def\normalbackslash{{\tt\backslashcurfont}}
+\def\normalbackslash{{\tt\rawbackslashxx}}
 
 \catcode`\\=\active
 
@@ -7030,7 +6720,6 @@ should work if nowhere else does.}
   @let>=@normalgreater
   @let+=@normalplus
   @let$=@normaldollar %$ font-lock fix
-  @unsepspaces
 }
 
 % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
@@ -7070,6 +6759,10 @@ should work if nowhere else does.}
 @catcode`@# = @other
 @catcode`@% = @other
 
+@c Set initial fonts.
+@textfonts
+@rm
+
 
 @c Local variables:
 @c eval: (add-hook 'write-file-hooks 'time-stamp)
@@ -7078,9 +6771,3 @@ should work if nowhere else does.}
 @c time-stamp-format: "%:y-%02m-%02d.%02H"
 @c time-stamp-end: "}"
 @c End:
-
-@c vim:sw=2:
-
-@ignore
-   arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
-@end ignore
diff --git a/manual/time.texi b/manual/time.texi
index 9b87d3eed0..7fc9448a32 100644
--- a/manual/time.texi
+++ b/manual/time.texi
@@ -1179,9 +1179,6 @@ The abbreviated month name according to the current locale.
 @item %B
 The full month name according to the current locale.
 
-Using @code{%B} together with @code{%d} produces grammatically
-incorrect results for some locales.
-
 @item %c
 The preferred calendar time representation for the current locale.
 
diff --git a/manual/users.texi b/manual/users.texi
index b52ee44439..20deeabdd2 100644
--- a/manual/users.texi
+++ b/manual/users.texi
@@ -1690,9 +1690,6 @@ extended information about users, adding an entry using this function
 would inevitably leave out much of the important information.
 @c Then how are programmers to modify the password file? -zw
 
-The group and user ID fields are left empty if the group or user name
-starts with a - or +.
-
 The function @code{putpwent} is declared in @file{pwd.h}.
 @end deftypefun