Update.

1998-04-20 18:00  Ulrich Drepper  <drepper@cygnus.com>

	* libc.map: Add __dgettext to GLIBC_2.0 and __libc_longjmp, and
	__libc_siglongjmp to GLIBC_2.1.

	* elf/dl-minimal.c (__assert_perror_fail): Don't use strerror, use
	__strerror_r.

	* iconv/Makefile: Don't run tests now.

	* iconv/iconv_prog.c (process_block): If loop is repeated, call iconv
	with correct output buffer.

	Major rewrite of the low-level gconv functionality.
	* iconv/gconv.c: Rewritten.
	* iconv/gconv.h: Likewise.
	* iconv/gconv_builtin.c: Likewise.
	* iconv/gconv_builtin.h: Likewise.
	* iconv/gconv_conf.c: Likewise.
	* iconv/gconv_int.h: Likewise.
	* iconv/gconv_open.c: Likewise.
	* iconv/gconv_simple.c: Likewise.
	* iconv/iconv.c: Likewise.
	* iconvdata/8bit-gap.c: Likewise.
	* iconvdata/8bit-generic.c: Likewise.
	* iconvdata/Makefile: Likewise.
	* iconvdata/big5.c: Likewise.
	* iconvdata/cns11643.c: Likewise.
	* iconvdata/cns11643.h: Likewise.
	* iconvdata/cns11643l1.c: Likewise.
	* iconvdata/cns11643l1.h: Likewise.
	* iconvdata/ebcdic-at-de-a.c: Likewise.
	* iconvdata/ebcdic-at-de.c: Likewise.
	* iconvdata/ebcdic-ca-fr.c: Likewise.
	* iconvdata/euccn.c: Likewise.
	* iconvdata/eucjp.c: Likewise.
	* iconvdata/euckr.c: Likewise.
	* iconvdata/euctw.c: Likewise.
	* iconvdata/gb2312.c: Likewise.
	* iconvdata/gb2312.h: Likewise.
	* iconvdata/hp-roman8.c: Likewise.
	* iconvdata/iso646.c: Likewise.
	* iconvdata/iso6937.c: Likewise.
	* iconvdata/iso8859-1.c: Likewise.
	* iconvdata/iso8859-10.c: Likewise.
	* iconvdata/iso8859-2.c: Likewise.
	* iconvdata/iso8859-3.c: Likewise.
	* iconvdata/iso8859-4.c: Likewise.
	* iconvdata/iso8859-5.c: Likewise.
	* iconvdata/iso8859-6.c: Likewise.
	* iconvdata/iso8859-7.c: Likewise.
	* iconvdata/iso8859-8.c: Likewise.
	* iconvdata/iso8859-9.c: Likewise.
	* iconvdata/jis0201.c: Likewise.
	* iconvdata/jis0201.h: Likewise.
	* iconvdata/jis0208.c: Likewise.
	* iconvdata/jis0208.h: Likewise.
	* iconvdata/jis0212.c: Likewise.
	* iconvdata/jis0212.h: Likewise.
	* iconvdata/johab.c: Likewise.
	* iconvdata/koi-8.c: Likewise.
	* iconvdata/koi8-r.c: Likewise.
	* iconvdata/ksc5601.c: Likewise.
	* iconvdata/ksc5601.h: Likewise.
	* iconvdata/latin-greek-1.c: Likewise.
	* iconvdata/latin-greek.c: Likewise.
	* iconvdata/run-iconv-test.sh: Likewise.
	* iconvdata/sjis.c: Likewise.
	* iconvdata/t61.c: Likewise.
	* iconvdata/uhc.c: Likewise.
	* wcsmbs/btowc.c: Likewise.
	* wcsmbs/mbrtowc.c: Likewise.
	* wcsmbs/mbsnrtowcs.c: Likewise.
	* wcsmbs/mbsrtowcs.c: Likewise.
	* wcsmbs/wcrtomb.c: Likewise.
	* wcsmbs/wcsmbsload.c: Likewise.
	* wcsmbs/wcsnrtombs.c: Likewise.
	* wcsmbs/wcsrtombs.c: Likewise.
	* wcsmbs/wctob.c: Likewise.
	* iconv/loop.c: New file.
	* iconv/skeleton.c: New file.

	* stdlib/mblen.c: Handle empty input string correctly.
	* stdlib/mbtowc.c: Likewise.

	* posix/getopt.c: Various cleanups.

	* sysdeps/arm/bits/setjmp.h: Add copyright text.
	* sysdeps/i386/bits/setjmp.h: Likewise.
	* sysdeps/m68k/bits/setjmp.h: Likewise.
	* sysdeps/powerpc/bits/setjmp.h: Likewise.
	* sysdeps/sparc/sparc32/bits/setjmp.h: Likewise.

	* sysdeps/generic/longjmp.c: Rename function to __libc_siglongjmp
	and make longjmp weak alias.

1998-04-18 20:29  Philip Blundell  <Philip.Blundell@pobox.com>

	* iconv/Makefile (routines): Only include gconv_dl if building for
	an ELF system - dynamic linking is not available on a.out.
	(CFLAGS-gconv_conf.c): Define STATIC_GCONV if omitting gconv_dl
	due to above check.
	* iconv/gconv_db.c: If STATIC_GCONV defined, don't try to call
	routines from gconv_dl.

1998-04-17  Gordon Matzigkeit  <gord@profitpress.com>

	* csu/init.c (_IO_stdin_used): Protect with USE_IN_LIBIO so that
	we can compile without libio.

1998-04-20 16:28  Ulrich Drepper  <drepper@cygnus.com>

	* sysdeps/mach/hurd/Subdirs: Remove login.

1998-04-11  Gordon Matzigkeit  <gord@profitpress.com>

	* db2/compat.h: Include <errno.h>, to make sure we get the
	definition of EFTYPE before we define it ourselves.

1998-04-10  Gordon Matzigkeit  <gord@profitpress.com>

	* sysdeps/generic/bits/socket.h: Protect against multiple inclusion.
	* sysdeps/mach/hurd/bits/ioctls.h: Likewise.
	Fix typo to allow inclusion from sys/ioctl.h again.

1998-04-16  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* iconvdata/*.[ch]: Clean up namespace.  Optimize character lookup.

1998-04-16  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* libc.map: Export __strerror_r.  Remove _strerror_internal.

1998-04-16  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* sysdeps/generic/strcasestr.c: Undefine strcasestr, not strstr.
	Also undefine __strcasestr.

1998-04-16  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* posix/regex.c: Rename __re_max_failures back to re_max_failures,
	aliases do not work with global variables due to copy relocations.

1998-04-20 15:12  Ulrich Drepper  <drepper@cygnus.com>

	* manual/creature.texi: Fix type.  Patch by Andreas Schwab.

1998-04-20 13:47  Ulrich Drepper  <drepper@cygnus.com>

	* signal/sighold.c: Include stddef.h for NULL definition.
	* signal/sigrelse.c: Likewise.
	* sysdeps/posix/sigignore.c: Likewise.
	* sysdeps/posix/sigset.c: Likewise.
	* sysdeps/posix/waitid.c: Likewise.
	* sysdeps/unix/sysv/linux/rt_sigsuspend.c: Likewise.
	* sysdeps/unix/sysv/linux/rt_sigtimedwait.c: Likewise.
	* sysdeps/unix/sysv/linux/sigwaitinfo.c: Likewise.
	* wcsmbs/mbsrtowcs.c: Include stdlib.h for MB_CUR_MAX.
	Patch by Franz Sirl <Franz.Sirl-kernel@lauterbach.com>.

1998-04-13  Mark Kettenis  <kettenis@phys.uva.nl>

	* login/Makefile (headers): Remove utmpx.h and bits/utmpx.h.
	* login/getutent.c (getutxent): Remove alias.
	* login/getutent_r.c (setutxent, pututxline, endutxent):
	Remove aliases.
	* login/getutid.c (getutxid): Remove alias.
	* login/getutline.c (getutxline): Remove alias.
	* login/utmp.h: Add prototypes for __updwtmp, __getutent,
	__getutid, __getutline and __pututline.
	* login/utmpx.h: Moved to ...
	* sysdeps/gnu/utmpx.h: ... here.  [__USE_GNU]: Define UTMPX_FILE,
	UTMPX_FILENAME, WTMPX_FILE and WTMPX_FILENAME, declare utmpxname
	and updwtmpx.
	* login/updwtmp.c: Moved to ...
	* sysdeps/generic/updwtmp.c: ... here.  (updwtmp): Generalized by
	allowing file name transformation.
	* sysdeps/gnu/updwtmp.c: New file.  Use generic implementation with
	additional file name transformation.
	* sysdeps/unix/sysv/linux/updwtmp.c: Likewise.
	* login/utmp_file.c: Moved to ...
	* sysdeps/generic/utmp_file.c: ... here.  (setutent_file):
	Generalized by allowing file name transformation.  Do not
	print error message.  Library functions should not print them.
	Reported by Jim Meyering.
	* sysdeps/gnu/utmp_file.c: New file.  Use generic implementation
	with additional file name transformation.
	* sysdeps/unix/sysv/linux/utmp_file.c: Likewise.
	* sysdeps/gnu/Makefile [$(subdir)=login] (sysdep_routines): Add
	setutxent, getutxent, endutxent, getutxid, getutxid, getutxline,
	pututxline, utmpxname and updwtmpx.  (sysdep_headers): Add utmpx.h
	and bits/utmpx.h.
	* sysdeps/gnu/bits/utmpx.h [__USE_GNU] Include paths.h.
	(_PATH_UTMPX): Define to _PATH_UTMP.  (_PATH_WTMPX): Define to
	_PATH_WTMPX.  (RUN_LVL): Define only if __USE_GNU.  (ACCOUNTING):
	Define if __USE_GNU.
	* sysdeps/gnu/setutxent.c: New file.
	* sysdeps/gnu/getutxent.c: New file.
	* sysdeps/gnu/endutxent.c: New file.
	* sysdeps/gnu/getutxid.c: New file.
	* sysdeps/gnu/getutxline.c: New file.
	* sysdeps/gnu/pututxline.c: New file.
	* sysdeps/gnu/utmpxname.c: New file.
	* sysdeps/gnu/updwtmpx.c: New file.
	* sysdeps/unix/sysv/linux/paths.h (_PATH_UTMP_DB): Remove.
	* sysdeps/generic/bits/utmpx.h: Remove.

1998-04-20  Ulrich Drepper  <drepper@cygnus.com>

	* posix/wordexp-test.c (main): Initialize ifs element of ts for
	~root test.

1998-04-17 07:53  H.J. Lu  <hjl@gnu.org>

	* sysdeps/unix/sysv/linux/i386/s_pread64.S: Fix a typo.

1998-04-17 11:32  Ulrich Drepper  <drepper@cygnus.com>

	* libio/oldfileops.c (_IO_old_file_seekoff): Define temporary st
	variable using _G_stat64.
	* libio/fileops.c: Remove macro definition of fstat, it is in the
	global header.
	Reported by Thorsten Kukuk <kukuk@weber.uni-paderborn.de>.

1998-04-17  Philip Blundell  <pb@nexus.co.uk>

	* sysdeps/arm/strlen.S: New file, based on code by Matthew Wilcox
	<willy@odie.barnet.ac.uk>.

1998-04-16  Philip Blundell  <Philip.Blundell@pobox.com>

	* inet/netinet/in.h (IN6_IS_ADDR_MC_NODELOCAL): New macro,
	required by IPv6 Basic API.
	(IN6_IS_ADDR_MC_LINKLOCAL): Likewise.
	(IN6_IS_ADDR_MC_SITELOCAL): Likewise.
	(IN6_IS_ADDR_MC_ORGLOCAL): Likewise.
	(IN6_IS_ADDR_MC_GLOBAL): Likewise.

1 files changed, 182 insertions, 298 deletions

diff --git a/iconvdata/eucjp.c b/iconvdata/eucjp.c
index e6a71cc791..24ebed94ec 100644
--- a/iconvdata/eucjp.c
+++ b/iconvdata/eucjp.c
@@ -18,306 +18,190 @@
    write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
    Boston, MA 02111-1307, USA.  */
 
-#include <gconv.h>
 #include <stdint.h>
-#include <string.h>
-#include <wchar.h>
+#include <gconv.h>
 #include <jis0201.h>
 #include <jis0208.h>
 #include <jis0212.h>
 
-/* Direction of the transformation.  */
-static int to_eucjp_object;
-static int from_eucjp_object;
-
-
-int
-gconv_init (struct gconv_step *step)
-{
-  /* Determine which direction.  */
-  if (strcasestr (step->from_name, "EUC-JP") != NULL)
-    step->data = &from_eucjp_object;
-  else if (strcasestr (step->to_name, "EUC-JP") != NULL)
-    step->data = &to_eucjp_object;
-  else
-    return GCONV_NOCONV;
-
-  return GCONV_OK;
-}
-
-
-void
-gconv_end (struct gconv_step *data)
-{
-  /* Nothing to do.  */
-}
-
-
-int
-gconv (struct gconv_step *step, struct gconv_step_data *data,
-       const char *inbuf, size_t *inbufsize, size_t *written, int do_flush)
-{
-  struct gconv_step *next_step = step + 1;
-  struct gconv_step_data *next_data = data + 1;
-  gconv_fct fct = next_step->fct;
-  size_t do_write;
-  int result;
-
-  /* If the function is called with no input this means we have to reset
-     to the initial state.  The possibly partly converted input is
-     dropped.  */
-  if (do_flush)
-    {
-      do_write = 0;
-
-      /* Call the steps down the chain if there are any.  */
-      if (data->is_last)
-	result = GCONV_OK;
-      else
-	{
-	  struct gconv_step *next_step = step + 1;
-	  struct gconv_step_data *next_data = data + 1;
-
-	  result = (*fct) (next_step, next_data, NULL, 0, written, 1);
-
-	  /* Clear output buffer.  */
-	  data->outbufavail = 0;
-	}
-    }
-  else
-    {
-      do_write = 0;
-
-      do
-	{
-	  result = GCONV_OK;
-
-	  if (step->data == &from_eucjp_object)
-	    {
-	      size_t inchars = *inbufsize;
-	      size_t outwchars = data->outbufavail;
-	      char *outbuf = data->outbuf;
-	      size_t cnt = 0;
-
-	      while (cnt < inchars
-		     && (outwchars + sizeof (wchar_t) <= data->outbufsize))
-		{
-		  int inchar = (unsigned char) inbuf[cnt];
-		  wchar_t ch;
-
-		  if (inchar <= 0x7f)
-		    ch = (wchar_t) inchar;
-                  else if ((inchar <= 0xa0 || inchar > 0xfe)
-			   && inchar != 0x8e && inchar != 0x8f)
-                      /* This is illegal.  */
-                      ch = L'\0';
-		  else
-		    {
-		      /* Two or more byte character.  First test whether the
-			 next character is also available.  */
-		      int inchar2;
-
-		      if (cnt + 1 >= inchars)
-			{
-			  /* The second character is not available.  Store
-			     the intermediate result.  */
-			  result = GCONV_INCOMPLETE_INPUT;
-			  break;
-			}
-
-		      inchar2 = (unsigned char) inbuf[++cnt];
-
-		      /* All second bytes of a multibyte character must be
-			 >= 0xa1. */
-		      if (inchar2 < 0xa1)
-			{
-			  /* This is an illegal character.  */
-			  --cnt;
-			  result = GCONV_ILLEGAL_INPUT;
-			  break;
-			}
-
-		      if (inchar == '\x8e')
-			/* This is code set 2: half-width katakana.  */
-			ch = jisx0201_to_ucs4 (inchar2);
-		      else if (inchar == '\x8f')
-			{
-			  /* This is code set 3: JIS X 0212-1990.  */
-			  const char *endp = &inbuf[cnt];
-
-			  ch = jisx0212_to_ucs4 (&endp, 1 + inchars - cnt,
-						 0x80);
-			  cnt = endp - inbuf;
-			}
-		      else
-			{
-			  /* This is code set 1: JIS X 0208.  */
-			  const char *endp = &inbuf[cnt - 1];
-
-			  ch = jisx0208_to_ucs4 (&endp, 2 + inchars - cnt,
-						 0x80);
-			  if (ch != L'\0')
-			    ++cnt;
-			}
-
-		      if (ch == UNKNOWN_10646_CHAR)
-                         ch = L'\0';
-
-		      if (ch == L'\0')
-			--cnt;
-		    }
-
-		  if (ch == L'\0' && inbuf[cnt] != '\0')
-		    {
-		      /* This is an illegal character.  */
-		      result = GCONV_ILLEGAL_INPUT;
-		      break;
-		    }
-
-		  *((wchar_t *) (outbuf + outwchars)) = ch;
-		  ++do_write;
-		  outwchars += sizeof (wchar_t);
-		  ++cnt;
-		}
-	      *inbufsize -= cnt;
-	      inbuf += cnt;
-	      data->outbufavail = outwchars;
-	    }
-	  else
-	    {
-	      size_t inwchars = *inbufsize;
-	      size_t outchars = data->outbufavail;
-	      char *outbuf = data->outbuf;
-	      size_t cnt = 0;
-	      int extra = 0;
-
-	      while (inwchars >= cnt + sizeof (wchar_t)
-		     && outchars < data->outbufsize)
-		{
-		  wchar_t ch = *((wchar_t *) (inbuf + cnt));
-
-		  if (ch <= L'\x7f')
-		    /* It's plain ASCII.  */
-		    outbuf[outchars] = ch;
-		  else
-		    {
-		      /* Try the JIS character sets.  */
-		      size_t found;
-
-		      found = ucs4_to_jisx0201 (ch, &outbuf[outchars]);
-
-		      if (found == UNKNOWN_10646_CHAR)
-			{
-			  /* No JIS 0201 character.  */
-			  found = ucs4_to_jisx0208 (ch, &outbuf[outchars],
-						    (data->outbufsize
-						     - outchars));
-			  if (found == 0)
-			    {
-			      /* We ran out of space.  */
-			      extra = 2;
-			      break;
-			    }
-			  else if (found != UNKNOWN_10646_CHAR)
-			    {
-			      /* It's a JIS 0208 character, adjust it for
-				 EUC-JP.  */
-			      outbuf[outchars++] += 0x80;
-			      outbuf[outchars] += 0x80;
-			    }
-			  else
-			    {
-			      /* No JIS 0208 character.  */
-			      found = ucs4_to_jisx0212 (ch, &outbuf[outchars],
-							(data->outbufsize
-							 - outchars));
-
-			      if (found == 0)
-				{
-				  /* We ran out of space.  */
-				  extra = 2;
-				  break;
-				}
-			      else if (found != UNKNOWN_10646_CHAR)
-				{
-				  /* It's a JIS 0212 character, adjust it for
-				     EUC-JP.  */
-				  outbuf[outchars++] += 0x80;
-				  outbuf[outchars] += 0x80;
-				}
-			      else
-				/* Illegal character.  */
-				break;
-			    }
-			}
-		    }
-
-		  ++do_write;
-		  ++outchars;
-		  cnt += sizeof (wchar_t);
-		}
-	      *inbufsize -= cnt;
-	      inbuf += cnt;
-	      data->outbufavail = outchars;
-
-	      if (outchars + extra < data->outbufsize)
-		{
-		  /* If there is still room in the output buffer something
-		     is wrong with the input.  */
-		  if (inwchars >= cnt + sizeof (wchar_t))
-		    {
-		      /* An error occurred.  */
-		      result = GCONV_ILLEGAL_INPUT;
-		      break;
-		    }
-		  if (inwchars != cnt)
-		    {
-		      /* There are some unprocessed bytes at the end of the
-			 input buffer.  */
-		      result = GCONV_INCOMPLETE_INPUT;
-		      break;
-		    }
-		}
-	    }
-
-	  if (result != GCONV_OK)
-	    break;
-
-	  if (data->is_last)
-	    {
-	      /* This is the last step.  */
-	      result = (*inbufsize > (step->data == &from_eucjp_object
-				      ? 0 : sizeof (wchar_t) - 1)
-			? GCONV_FULL_OUTPUT : GCONV_EMPTY_INPUT);
-	      break;
-	    }
-
-	  /* Status so far.  */
-	  result = GCONV_EMPTY_INPUT;
-
-	  if (data->outbufavail > 0)
-	    {
-	      /* Call the functions below in the chain.  */
-	      size_t newavail = data->outbufavail;
-
-	      result = (*fct) (next_step, next_data, data->outbuf, &newavail,
-			       written, 0);
-
-	      /* Correct the output buffer.  */
-	      if (newavail != data->outbufavail && newavail > 0)
-		{
-		  memmove (data->outbuf,
-			   &data->outbuf[data->outbufavail - newavail],
-			   newavail);
-		  data->outbufavail = newavail;
-		}
-	    }
-	}
-      while (*inbufsize > 0 && result == GCONV_EMPTY_INPUT);
-    }
-
-  if (written != NULL && data->is_last)
-    *written = do_write;
-
-  return result;
-}
+/* Definitions used in the body of the `gconv' function.  */
+#define CHARSET_NAME		"EUC-JP"
+#define FROM_LOOP		from_euc_jp
+#define TO_LOOP			to_euc_jp
+#define DEFINE_INIT		1
+#define DEFINE_FINI		1
+#define MIN_NEEDED_FROM		1
+#define MAX_NEEDED_FROM		3
+#define MIN_NEEDED_TO		4
+
+
+/* First define the conversion function from EUC-JP to UCS4.  */
+#define MIN_NEEDED_INPUT	MIN_NEEDED_FROM
+#define MAX_NEEDED_INPUT	MAX_NEEDED_FROM
+#define MIN_NEEDED_OUTPUT	MIN_NEEDED_TO
+#define LOOPFCT			FROM_LOOP
+#define BODY \
+  {									      \
+    uint32_t ch = *inptr;						      \
+									      \
+    if (ch <= 0x7f)							      \
+      ++inptr;								      \
+    else if ((ch <= 0xa0 || ch > 0xfe) && ch != 0x8e && ch != 0x8f)	      \
+      {									      \
+	/* This is illegal.  */						      \
+	result = GCONV_ILLEGAL_INPUT;					      \
+	break;								      \
+      }									      \
+    else								      \
+      {									      \
+	/* Two or more byte character.  First test whether the next	      \
+	   character is also available.  */				      \
+	int ch2;							      \
+									      \
+	if (NEED_LENGTH_TEST && inptr + 1 >= inend)			      \
+	  {								      \
+	    /* The second character is not available.  Store the	      \
+	       intermediate result.  */					      \
+	    result = GCONV_INCOMPLETE_INPUT;				      \
+	    break;							      \
+	  }								      \
+									      \
+	ch2 = inptr[1];							      \
+									      \
+	/* All second bytes of a multibyte character must be >= 0xa1. */      \
+	if (ch2 < 0xa1)							      \
+	  {								      \
+	    /* This is an illegal character.  */			      \
+	    result = GCONV_ILLEGAL_INPUT;				      \
+	    break;							      \
+	  }								      \
+									      \
+	if (ch == 0x8e)							      \
+	  {								      \
+	    /* This is code set 2: half-width katakana.  */		      \
+	    ch = jisx0201_to_ucs4 (ch2);				      \
+	    inptr += 2;							      \
+	  }								      \
+	else								      \
+	  {								      \
+	    const unsigned char *endp;					      \
+									      \
+	    if (ch == 0x8f)						      \
+	      {								      \
+		/* This is code set 3: JIS X 0212-1990.  */		      \
+		endp = inptr + 1;					      \
+									      \
+		ch = jisx0212_to_ucs4 (&endp,				      \
+				       NEED_LENGTH_TEST ? inend - endp : 2,   \
+				       0x80);				      \
+	      }								      \
+	    else							      \
+	      {								      \
+		/* This is code set 1: JIS X 0208.  */			      \
+		endp = inptr;						      \
+									      \
+		ch = jisx0208_to_ucs4 (&endp,				      \
+				       NEED_LENGTH_TEST ? inend - inptr : 2,  \
+				       0x80);				      \
+	      }								      \
+									      \
+	    if (NEED_LENGTH_TEST && ch == 0)				      \
+	      {								      \
+		/* Not enough input available.  */			      \
+		result = GCONV_INCOMPLETE_INPUT;			      \
+		break;							      \
+	      }								      \
+	    if (ch == UNKNOWN_10646_CHAR)				      \
+	      {								      \
+		/* Illegal character.  */				      \
+		result = GCONV_ILLEGAL_INPUT;				      \
+		break;							      \
+	      }								      \
+	    inptr = endp;						      \
+	  }								      \
+      }									      \
+									      \
+    *((uint32_t *) outptr)++ = ch;					      \
+  }
+#include <iconv/loop.c>
+
+
+/* Next, define the other direction.  */
+#define MIN_NEEDED_INPUT	MIN_NEEDED_TO
+#define MIN_NEEDED_OUTPUT	MIN_NEEDED_FROM
+#define MAX_NEEDED_OUTPUT	MAX_NEEDED_FROM
+#define LOOPFCT			TO_LOOP
+#define BODY \
+  {									      \
+    uint32_t ch = *((uint32_t *) inptr);				      \
+									      \
+    if (ch <= 0x7f)							      \
+      /* It's plain ASCII.  */						      \
+      *outptr++ = ch;							      \
+    else								      \
+      {									      \
+	/* Try the JIS character sets.  */				      \
+	size_t found;							      \
+									      \
+	/* See whether we have room for at least two characters.  */	      \
+	if (NEED_LENGTH_TEST && outptr + 1 >= outend)			      \
+	  {								      \
+	    result = GCONV_FULL_OUTPUT;					      \
+	    break;							      \
+	  }								      \
+									      \
+	found = ucs4_to_jisx0201 (ch, outptr + 1);			      \
+	if (found != UNKNOWN_10646_CHAR)				      \
+	  {								      \
+	    /* Yes, it's a JIS 0201 character.  Store the shift byte.  */     \
+	    *outptr = 0x8e;						      \
+	    outptr += 2;						      \
+	  }								      \
+	else								      \
+	  {								      \
+	    /* No JIS 0201 character.  */				      \
+	    found = ucs4_to_jisx0208 (ch, outptr, 2);			      \
+	    /* Please note that we always have enough room for the output. */ \
+	    if (found != UNKNOWN_10646_CHAR)				      \
+	      {								      \
+		/* It's a JIS 0208 character, adjust it for EUC-JP.  */	      \
+		*outptr++ += 0x80;					      \
+		*outptr++ += 0x80;					      \
+	      }								      \
+	    else							      \
+	      {								      \
+		/* No JIS 0208 character.  */				      \
+		found = ucs4_to_jisx0212 (ch, outptr + 1,		      \
+					  (NEED_LENGTH_TEST		      \
+					   ? outend - outptr - 1 : 2));	      \
+		  							      \
+		if (found == 0)						      \
+		  {							      \
+		    /* We ran out of space.  */				      \
+		    result = GCONV_FULL_OUTPUT;				      \
+		    break;						      \
+		  }							      \
+		else if (found != UNKNOWN_10646_CHAR)			      \
+		  {							      \
+		    /* It's a JIS 0212 character, adjust it for EUC-JP.  */   \
+		    *outptr++ = 0x8f;					      \
+		    *outptr++ += 0x80;					      \
+		    *outptr++ += 0x80;					      \
+		  }							      \
+		else							      \
+		  {							      \
+		    /* Illegal character.  */				      \
+		    result = GCONV_ILLEGAL_INPUT;			      \
+		    break;						      \
+		  }							      \
+	      }								      \
+	  }								      \
+      }									      \
+									      \
+    inptr += 4;								      \
+  }
+#include <iconv/loop.c>
+
+
+/* Now define the toplevel functions.  */
+#include <iconv/skeleton.c>