Update.

2002-04-18  Bruno Haible  <bruno@clisp.org>

	* iconvdata/euc-jisx0213.c (EMIT_SHIFT_TO_INIT, BODY for
	FROM_DIRECTION): Make the FROM direction stateless.
	* iconvdata/shift_jisx0213.c (EMIT_SHIFT_TO_INIT, BODY for
	FROM_DIRECTION): Likewise.

	* iconvdata/cvs11643l1.c: Update comments.
	* sysdeps/unix/sysv/linux/s390/s390-64/syscalls.list: Likewise.

1 files changed, 93 insertions, 111 deletions

diff --git a/iconvdata/euc-jisx0213.c b/iconvdata/euc-jisx0213.c
index b0836b173d..c696f94ee8 100644
--- a/iconvdata/euc-jisx0213.c
+++ b/iconvdata/euc-jisx0213.c
@@ -62,9 +62,7 @@
     *statep = saved_state
 
 
-/* During EUC-JISX0213 to UCS-4 conversion, the COUNT element of the state
-   contains the last UCS-4 character, shifted by 3 bits.
-   During UCS-4 to EUC-JISX0213 conversion, the COUNT element of the state
+/* During UCS-4 to EUC-JISX0213 conversion, the COUNT element of the state
    contains the last two bytes to be output, shifted by 3 bits.  */
 
 /* Since this is a stateful encoding we have to provide code which resets
@@ -74,17 +72,8 @@
   if (data->__statep->__count != 0)					      \
     {									      \
       if (FROM_DIRECTION)						      \
-	{								      \
-	  if (__builtin_expect (outbuf + 4 <= outend, 1))		      \
-	    {								      \
-	      /* Write out the last character.  */			      \
-	      *((uint32_t *) outbuf)++ = data->__statep->__count >> 3;	      \
-	      data->__statep->__count = 0;				      \
-	    }								      \
-	  else								      \
-	    /* We don't have enough room in the output buffer.  */	      \
-	    status = __GCONV_FULL_OUTPUT;				      \
-	}								      \
+	/* We don't use shift states in the FROM_DIRECTION.  */		      \
+	data->__statep->__count = 0;					      \
       else								      \
 	{								      \
 	  if (__builtin_expect (outbuf + 2 <= outend, 1))		      \
@@ -109,33 +98,44 @@
 #define LOOPFCT			FROM_LOOP
 #define BODY \
   {									      \
-    uint32_t ch;							      \
+    uint32_t ch = *inptr;						      \
 									      \
-    /* Determine whether there is a buffered character pending.  */	      \
-    ch = *statep >> 3;							      \
-    if (__builtin_expect (ch == 0, 1))					      \
+    if (ch < 0x80)							      \
+      /* Plain ASCII character.  */					      \
+      ++inptr;								      \
+    else if ((ch >= 0xa1 && ch <= 0xfe) || ch == 0x8e || ch == 0x8f)	      \
       {									      \
-	/* No - so look at the next input byte.  */			      \
-	ch = *inptr;							      \
-	if (ch < 0x80)							      \
-	  /* Plain ASCII character.  */					      \
-	  ++inptr;							      \
-	else if ((ch >= 0xa1 && ch <= 0xfe) || ch == 0x8e || ch == 0x8f)      \
+	/* Two or three byte character.  */				      \
+	uint32_t ch2;							      \
+									      \
+	if (__builtin_expect (inptr + 1 >= inend, 0))			      \
 	  {								      \
-	    /* Two or three byte character.  */				      \
-	    uint32_t ch2;						      \
+	    /* The second byte is not available.  */			      \
+	    result = __GCONV_INCOMPLETE_INPUT;				      \
+	    break;							      \
+	  }								      \
+									      \
+	ch2 = inptr[1];							      \
 									      \
-	    if (__builtin_expect (inptr + 1 >= inend, 0))		      \
+	/* The second byte must be >= 0xa1 and <= 0xfe.  */		      \
+	if (__builtin_expect (ch2 < 0xa1 || ch2 > 0xfe, 0))		      \
+	  {								      \
+	    /* This is an illegal character.  */			      \
+	    if (! ignore_errors_p ())					      \
 	      {								      \
-		/* The second byte is not available.  */		      \
-		result = __GCONV_INCOMPLETE_INPUT;			      \
+		result = __GCONV_ILLEGAL_INPUT;				      \
 		break;							      \
 	      }								      \
 									      \
-	    ch2 = inptr[1];						      \
+	    ++inptr;							      \
+	    ++*irreversible;						      \
+	    break;							      \
+	  }								      \
 									      \
-	    /* The second byte must be >= 0xa1 and <= 0xfe.  */		      \
-	    if (__builtin_expect (ch2 < 0xa1 || ch2 > 0xfe, 0))		      \
+	if (ch == 0x8e)							      \
+	  {								      \
+	    /* Half-width katakana.  */					      \
+	    if (__builtin_expect (ch2 > 0xdf, 0))			      \
 	      {								      \
 		/* This is an illegal character.  */			      \
 		if (! ignore_errors_p ())				      \
@@ -149,107 +149,89 @@
 		break;							      \
 	      }								      \
 									      \
-	    if (ch == 0x8e)						      \
+	    ch = ch2 + 0xfec0;						      \
+	    inptr += 2;							      \
+	  }								      \
+	else								      \
+	  {								      \
+	    const unsigned char *endp;					      \
+									      \
+	    if (ch == 0x8f)						      \
 	      {								      \
-		/* Half-width katakana.  */				      \
-		if (__builtin_expect (ch2 > 0xdf, 0))			      \
+		/* JISX 0213 plane 2.  */				      \
+		uint32_t ch3;						      \
+									      \
+		if (__builtin_expect (inptr + 2 >= inend, 0))		      \
 		  {							      \
-		    /* This is an illegal character.  */		      \
-		    if (! ignore_errors_p ())				      \
-		      {							      \
-			result = __GCONV_ILLEGAL_INPUT;			      \
-			break;						      \
-		      }							      \
-									      \
-		    ++inptr;						      \
-		    ++*irreversible;					      \
+		    /* The third byte is not available.  */		      \
+		    result = __GCONV_INCOMPLETE_INPUT;			      \
 		    break;						      \
 		  }							      \
 									      \
-		ch = ch2 + 0xfec0;					      \
-		inptr += 2;						      \
+		ch3 = inptr[2];						      \
+		endp = inptr + 3;					      \
+									      \
+		ch = jisx0213_to_ucs4 (0x200 - 0x80 + ch2, ch3 ^ 0x80);	      \
 	      }								      \
 	    else							      \
 	      {								      \
-		const unsigned char *endp;				      \
+		/* JISX 0213 plane 1.  */				      \
+		endp = inptr + 2;					      \
 									      \
-		if (ch == 0x8f)						      \
-		  {							      \
-		    /* JISX 0213 plane 2.  */				      \
-		    uint32_t ch3;					      \
+		ch = jisx0213_to_ucs4 (0x100 - 0x80 + ch, ch2 ^ 0x80);	      \
+	      }								      \
 									      \
-		    if (__builtin_expect (inptr + 2 >= inend, 0))	      \
-		      {							      \
-			/* The third byte is not available.  */		      \
-			result = __GCONV_INCOMPLETE_INPUT;		      \
-			break;						      \
-		      }							      \
+	    if (ch == 0)						      \
+	      {								      \
+		/* This is an illegal character.  */			      \
+		if (! ignore_errors_p ())				      \
+		  {							      \
+		    result = __GCONV_ILLEGAL_INPUT;			      \
+		    break;						      \
+		  }							      \
 									      \
-		    ch3 = inptr[2];					      \
-		    endp = inptr + 3;					      \
+		++inptr;						      \
+		++*irreversible;					      \
+		break;							      \
+	      }								      \
 									      \
-		    ch = jisx0213_to_ucs4 (0x200 - 0x80 + ch2, ch3 ^ 0x80);   \
-		  }							      \
-		else							      \
-		  {							      \
-		    /* JISX 0213 plane 1.  */				      \
-		    endp = inptr + 2;					      \
+	    inptr = endp;						      \
 									      \
-		    ch = jisx0213_to_ucs4 (0x100 - 0x80 + ch, ch2 ^ 0x80);    \
-		  }							      \
+	    if (ch < 0x80)						      \
+	      {								      \
+		/* It's a combining character.  */			      \
+		uint32_t u1 = __jisx0213_to_ucs_combining[ch - 1][0];	      \
+		uint32_t u2 = __jisx0213_to_ucs_combining[ch - 1][1];	      \
 									      \
-		if (ch == 0)						      \
+		/* See whether we have room for two characters.  */	      \
+		if (outptr + 8 <= outend)				      \
 		  {							      \
-		    /* This is an illegal character.  */		      \
-		    if (! ignore_errors_p ())				      \
-		      {							      \
-			result = __GCONV_ILLEGAL_INPUT;			      \
-			break;						      \
-		      }							      \
-									      \
-		    ++inptr;						      \
-		    ++*irreversible;					      \
-		    break;						      \
+		    put32 (outptr, u1);					      \
+		    outptr += 4;					      \
+		    put32 (outptr, u2);					      \
+		    outptr += 4;					      \
+		    continue;						      \
 		  }							      \
-									      \
-		inptr = endp;						      \
-									      \
-		if (ch < 0x80)						      \
+		else							      \
 		  {							      \
-		    /* It's a combining character.  */			      \
-		    uint32_t u1 = __jisx0213_to_ucs_combining[ch - 1][0];     \
-		    uint32_t u2 = __jisx0213_to_ucs_combining[ch - 1][1];     \
-									      \
-		    /* See whether we have room for two characters.  */	      \
-		    if (outptr + 8 <= outend)				      \
-		      {							      \
-			put32 (outptr, u1);				      \
-			outptr += 4;					      \
-			put32 (outptr, u2);				      \
-			outptr += 4;					      \
-			continue;					      \
-		      }							      \
-									      \
-		    /* Otherwise store only the first character now, and      \
-		       put the second one into the queue.  */		      \
-		    ch = u1;						      \
-		    *statep = u2 << 3;					      \
+		    result = __GCONV_FULL_OUTPUT;			      \
+		    break;						      \
 		  }							      \
 	      }								      \
 	  }								      \
-	else								      \
+      }									      \
+    else								      \
+      {									      \
+	/* This is illegal.  */						      \
+	if (! ignore_errors_p ())					      \
 	  {								      \
-	    /* This is illegal.  */					      \
-	    if (! ignore_errors_p ())					      \
-	      {								      \
-		result = __GCONV_ILLEGAL_INPUT;				      \
-		break;							      \
-	      }								      \
-									      \
-	    ++inptr;							      \
-	    ++*irreversible;						      \
-	    continue;							      \
+	    result = __GCONV_ILLEGAL_INPUT;				      \
+	    break;							      \
 	  }								      \
+									      \
+	++inptr;							      \
+	++*irreversible;						      \
+	continue;							      \
       }									      \
 									      \
     put32 (outptr, ch);							      \