Fix for [BZ #15680] IBM long double inaccuracy

http://sourceware.org/ml/libc-alpha/2013-06/msg00919.html

I discovered a number of places where denormals and other corner cases
were being handled wrongly.

- printf_fphex.c: Testing for the low double exponent being zero is
unnecessary.  If the difference in exponents is less than 53 then the
high double exponent must be nearing the low end of its range, and the
low double exponent hit rock bottom.

- ldbl2mpn.c: A denormal (ie. exponent of zero) value is treated as
if the exponent was one, so shift mantissa left by one.  Code handling
normalisation of the low double mantissa lacked a test for shift count
greater than bits in type being shifted, and lacked anything to handle
the case where the difference in exponents is less than 53 as in
printf_fphex.c.

- math_ldbl.h (ldbl_extract_mantissa): Same as above, but worse, with
code testing for exponent > 1 for some reason, probably a typo for >= 1.

- math_ldbl.h (ldbl_insert_mantissa): Round the high double as per
mpn2ldbl.c (hi is odd or explicit mantissas non-zero) so that the
number we return won't change when applying ldbl_canonicalize().
Add missing overflow checks and normalisation of high mantissa.
Correct misleading comment: "The hidden bit of the lo mantissa is
zero" is not always true as can be seen from the code rounding the hi
mantissa.  Also by inspection, lzcount can never be less than zero so
remove that test.  Lastly, masking bitfields to their widths can be
left to the compiler.

- mpn2ldbl.c: The overflow checks here on rounding of high double were
just plain wrong.  Incrementing the exponent must be accompanied by a
shift right of the mantissa to keep the value unchanged.  Above notes
for ldbl_insert_mantissa are also relevant.

	[BZ #15680]
	* sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c: Comment fix.
	* sysdeps/ieee754/ldbl-128ibm/printf_fphex.c
	(PRINT_FPHEX_LONG_DOUBLE): Tidy code by moving -53 into ediff
	calculation.  Remove unnecessary test for denormal exponent.
	* sysdeps/ieee754/ldbl-128ibm/ldbl2mpn.c (__mpn_extract_long_double):
	Correct handling of denormals.  Avoid undefined shift behaviour.
	Correct normalisation of low mantissa when low double is denormal.
	* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h
	(ldbl_extract_mantissa): Likewise.  Comment.  Use uint64_t* for hi64.
	(ldbl_insert_mantissa): Make both hi64 and lo64 parms uint64_t.
	Correct normalisation of low mantissa.  Test for overflow of high
	mantissa and normalise.
	(ldbl_nearbyint): Use more readable constant for two52.
	* sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c
	(__mpn_construct_long_double): Fix test for overflow of high
	mantissa and correct normalisation.  Avoid undefined shift.

6 files changed, 176 insertions, 106 deletions

diff --git a/ChangeLog b/ChangeLog
index e4480ec87b..d6bbe3455f 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,25 @@
 2013-10-04  Alan Modra  <amodra@gmail.com>
 
+	[BZ #15680]
+	* sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c: Comment fix.
+	* sysdeps/ieee754/ldbl-128ibm/printf_fphex.c
+	(PRINT_FPHEX_LONG_DOUBLE): Tidy code by moving -53 into ediff
+	calculation.  Remove unnecessary test for denormal exponent.
+	* sysdeps/ieee754/ldbl-128ibm/ldbl2mpn.c (__mpn_extract_long_double):
+	Correct handling of denormals.  Avoid undefined shift behaviour.
+	Correct normalisation of low mantissa when low double is denormal.
+	* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h
+	(ldbl_extract_mantissa): Likewise.  Comment.  Use uint64_t* for hi64.
+	(ldbl_insert_mantissa): Make both hi64 and lo64 parms uint64_t.
+	Correct normalisation of low mantissa.  Test for overflow of high
+	mantissa and normalise.
+	(ldbl_nearbyint): Use more readable constant for two52.
+	* sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c
+	(__mpn_construct_long_double): Fix test for overflow of high
+	mantissa and correct normalisation.  Avoid undefined shift.
+
+2013-10-04  Alan Modra  <amodra@gmail.com>
+
 	* sysdeps/ieee754/ldbl-128ibm/ieee754.h
 	(union ibm_extended_long_double): Define as an array of ieee754_double.
 	(IBM_EXTENDED_LONG_DOUBLE_BIAS): Delete.
diff --git a/sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c b/sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c
index 6a72d6a853..8885def4e1 100644
--- a/sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c
+++ b/sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c
@@ -243,7 +243,7 @@ int32_t __ieee754_rem_pio2l(long double x, long double *y)
      We split the 113 bits of the mantissa into 5 24bit integers
      stored in a double array.  */
   /* Make the IBM extended format 105 bit mantissa look like the ieee854 112
-     bit mantissa so the next operatation will give the correct result.  */
+     bit mantissa so the next operation will give the correct result.  */
   ldbl_extract_mantissa (&ixd, &lxd, &exp, x);
   exp = exp - 23;
   /* This is faster than doing this in floating point, because we
diff --git a/sysdeps/ieee754/ldbl-128ibm/ldbl2mpn.c b/sysdeps/ieee754/ldbl-128ibm/ldbl2mpn.c
index 5149ba10bf..e46fde74fc 100644
--- a/sysdeps/ieee754/ldbl-128ibm/ldbl2mpn.c
+++ b/sysdeps/ieee754/ldbl-128ibm/ldbl2mpn.c
@@ -36,6 +36,7 @@ __mpn_extract_long_double (mp_ptr res_ptr, mp_size_t size,
   union ibm_extended_long_double u;
   unsigned long long hi, lo;
   int ediff;
+
   u.ld = value;
 
   *is_neg = u.d[0].ieee.negative;
@@ -43,27 +44,36 @@ __mpn_extract_long_double (mp_ptr res_ptr, mp_size_t size,
 
   lo = ((long long) u.d[1].ieee.mantissa0 << 32) | u.d[1].ieee.mantissa1;
   hi = ((long long) u.d[0].ieee.mantissa0 << 32) | u.d[0].ieee.mantissa1;
-  /* If the lower double is not a denomal or zero then set the hidden
+
+  /* If the lower double is not a denormal or zero then set the hidden
      53rd bit.  */
-  if (u.d[1].ieee.exponent > 0)
-    {
-      lo |= 1LL << 52;
+  if (u.d[1].ieee.exponent != 0)
+    lo |= 1ULL << 52;
+  else
+    lo = lo << 1;
 
-      /* The lower double is normalized separately from the upper.  We may
-	 need to adjust the lower manitissa to reflect this.  */
-      ediff = u.d[0].ieee.exponent - u.d[1].ieee.exponent;
-      if (ediff > 53)
-	lo = lo >> (ediff-53);
+  /* The lower double is normalized separately from the upper.  We may
+     need to adjust the lower manitissa to reflect this.  */
+  ediff = u.d[0].ieee.exponent - u.d[1].ieee.exponent - 53;
+  if (ediff > 0)
+    {
+      if (ediff < 64)
+	lo = lo >> ediff;
+      else
+	lo = 0;
     }
+  else if (ediff < 0)
+    lo = lo << -ediff;
+
   /* The high double may be rounded and the low double reflects the
      difference between the long double and the rounded high double
      value.  This is indicated by a differnce between the signs of the
      high and low doubles.  */
-  if ((u.d[0].ieee.negative != u.d[1].ieee.negative)
-      && ((u.d[1].ieee.exponent != 0) && (lo != 0L)))
+  if (u.d[0].ieee.negative != u.d[1].ieee.negative
+      && lo != 0)
     {
       lo = (1ULL << 53) - lo;
-      if (hi == 0LL)
+      if (hi == 0)
 	{
 	  /* we have a borrow from the hidden bit, so shift left 1.  */
 	  hi = 0x0ffffffffffffeLL | (lo >> 51);
diff --git a/sysdeps/ieee754/ldbl-128ibm/math_ldbl.h b/sysdeps/ieee754/ldbl-128ibm/math_ldbl.h
index 3036f14d03..4bb49c8dd0 100644
--- a/sysdeps/ieee754/ldbl-128ibm/math_ldbl.h
+++ b/sysdeps/ieee754/ldbl-128ibm/math_ldbl.h
@@ -6,6 +6,10 @@
 #include <ieee754.h>
 #include <stdint.h>
 
+/* To suit our callers we return *hi64 and *lo64 as if they came from
+   an ieee854 112 bit mantissa, that is, 48 bits in *hi64 (plus one
+   implicit bit) and 64 bits in *lo64.  */
+
 static inline void
 ldbl_extract_mantissa (int64_t *hi64, uint64_t *lo64, int *exp, long double x)
 {
@@ -14,77 +18,119 @@ ldbl_extract_mantissa (int64_t *hi64, uint64_t *lo64, int *exp, long double x)
      the number before the decimal point and the second implicit bit
      as bit 53 of the mantissa.  */
   uint64_t hi, lo;
-  int ediff;
   union ibm_extended_long_double u;
+
   u.ld = x;
   *exp = u.d[0].ieee.exponent - IEEE754_DOUBLE_BIAS;
 
   lo = ((uint64_t) u.d[1].ieee.mantissa0 << 32) | u.d[1].ieee.mantissa1;
   hi = ((uint64_t) u.d[0].ieee.mantissa0 << 32) | u.d[0].ieee.mantissa1;
-  /* If the lower double is not a denomal or zero then set the hidden
-     53rd bit.  */
-  if (u.d[1].ieee.exponent > 0x001)
-    {
-      lo |= (1ULL << 52);
-      lo = lo << 7; /* pre-shift lo to match ieee854.  */
-      /* The lower double is normalized separately from the upper.  We
-	 may need to adjust the lower manitissa to reflect this.  */
-      ediff = u.d[0].ieee.exponent - u.d[1].ieee.exponent;
-      if (ediff > 53)
-	lo = lo >> (ediff-53);
-      hi |= (1ULL << 52);
-    }
 
-  if ((u.d[0].ieee.negative != u.d[1].ieee.negative)
-      && ((u.d[1].ieee.exponent != 0) && (lo != 0LL)))
+  if (u.d[0].ieee.exponent != 0)
     {
-      hi--;
-      lo = (1ULL << 60) - lo;
-      if (hi < (1ULL << 52))
+      int ediff;
+
+      /* If not a denormal or zero then we have an implicit 53rd bit.  */
+      hi |= (uint64_t) 1 << 52;
+
+      if (u.d[1].ieee.exponent != 0)
+	lo |= (uint64_t) 1 << 52;
+      else
+	/* A denormal is to be interpreted as having a biased exponent
+	   of 1.  */
+	lo = lo << 1;
+
+      /* We are going to shift 4 bits out of hi later, because we only
+	 want 48 bits in *hi64.  That means we want 60 bits in lo, but
+	 we currently only have 53.  Shift the value up.  */
+      lo = lo << 7;
+
+      /* The lower double is normalized separately from the upper.
+	 We may need to adjust the lower mantissa to reflect this.
+	 The difference between the exponents can be larger than 53
+	 when the low double is much less than 1ULP of the upper
+	 (in which case there are significant bits, all 0's or all
+	 1's, between the two significands).  The difference between
+	 the exponents can be less than 53 when the upper double
+	 exponent is nearing its minimum value (in which case the low
+	 double is denormal ie. has an exponent of zero).  */
+      ediff = u.d[0].ieee.exponent - u.d[1].ieee.exponent - 53;
+      if (ediff > 0)
 	{
-	  /* we have a borrow from the hidden bit, so shift left 1.  */
-	  hi = (hi << 1) | (lo >> 59);
-	  lo = 0xfffffffffffffffLL & (lo << 1);
-	  *exp = *exp - 1;
+	  if (ediff < 64)
+	    lo = lo >> ediff;
+	  else
+	    lo = 0;
+	}
+      else if (ediff < 0)
+	lo = lo << -ediff;
+
+      if (u.d[0].ieee.negative != u.d[1].ieee.negative
+	  && lo != 0)
+	{
+	  hi--;
+	  lo = ((uint64_t) 1 << 60) - lo;
+	  if (hi < (uint64_t) 1 << 52)
+	    {
+	      /* We have a borrow from the hidden bit, so shift left 1.  */
+	      hi = (hi << 1) | (lo >> 59);
+	      lo = (((uint64_t) 1 << 60) - 1) & (lo << 1);
+	      *exp = *exp - 1;
+	    }
 	}
     }
+  else
+    /* If the larger magnitude double is denormal then the smaller
+       one must be zero.  */
+    hi = hi << 1;
+
   *lo64 = (hi << 60) | lo;
   *hi64 = hi >> 4;
 }
 
 static inline long double
-ldbl_insert_mantissa (int sign, int exp, int64_t hi64, u_int64_t lo64)
+ldbl_insert_mantissa (int sign, int exp, int64_t hi64, uint64_t lo64)
 {
   union ibm_extended_long_double u;
-  unsigned long hidden2, lzcount;
-  unsigned long long hi, lo;
+  int expnt2;
+  uint64_t hi, lo;
 
   u.d[0].ieee.negative = sign;
   u.d[1].ieee.negative = sign;
   u.d[0].ieee.exponent = exp + IEEE754_DOUBLE_BIAS;
-  u.d[1].ieee.exponent = exp-53 + IEEE754_DOUBLE_BIAS;
+  u.d[1].ieee.exponent = 0;
+  expnt2 = exp - 53 + IEEE754_DOUBLE_BIAS;
+
   /* Expect 113 bits (112 bits + hidden) right justified in two longs.
      The low order 53 bits (52 + hidden) go into the lower double */
-  lo = (lo64 >> 7)& ((1ULL << 53) - 1);
-  hidden2 = (lo64 >> 59) &  1ULL;
+  lo = (lo64 >> 7) & (((uint64_t) 1 << 53) - 1);
   /* The high order 53 bits (52 + hidden) go into the upper double */
-  hi = (lo64 >> 60) & ((1ULL << 11) - 1);
-  hi |= (hi64 << 4);
+  hi = lo64 >> 60;
+  hi |= hi64 << 4;
 
-  if (lo != 0LL)
+  if (lo != 0)
     {
-      /* hidden2 bit of low double controls rounding of the high double.
-	 If hidden2 is '1' then round up hi and adjust lo (2nd mantissa)
+      int lzcount;
+
+      /* hidden bit of low double controls rounding of the high double.
+	 If hidden is '1' and either the explicit mantissa is non-zero
+	 or hi is odd, then round up hi and adjust lo (2nd mantissa)
 	 plus change the sign of the low double to compensate.  */
-      if (hidden2)
+      if ((lo & ((uint64_t) 1 << 52)) != 0
+	  && ((hi & 1) != 0 || (lo & (((uint64_t) 1 << 52) - 1)) != 0))
 	{
 	  hi++;
+	  if ((hi & ((uint64_t) 1 << 53)) != 0)
+	    {
+	      hi = hi >> 1;
+	      u.d[0].ieee.exponent++;
+	    }
 	  u.d[1].ieee.negative = !sign;
-	  lo = (1ULL << 53) - lo;
+	  lo = ((uint64_t) 1 << 53) - lo;
 	}
-      /* The hidden bit of the lo mantissa is zero so we need to
-	 normalize the it for the low double.  Shift it left until the
-	 hidden bit is '1' then adjust the 2nd exponent accordingly.  */
+
+      /* Normalize the low double.  Shift the mantissa left until
+	 the hidden bit is '1' and adjust the exponent accordingly.  */
 
       if (sizeof (lo) == sizeof (long))
 	lzcount = __builtin_clzl (lo);
@@ -92,34 +138,30 @@ ldbl_insert_mantissa (int sign, int exp, int64_t hi64, u_int64_t lo64)
 	lzcount = __builtin_clzl ((long) (lo >> 32));
       else
 	lzcount = __builtin_clzl ((long) lo) + 32;
-      lzcount = lzcount - 11;
-      if (lzcount > 0)
+      lzcount = lzcount - (64 - 53);
+      lo <<= lzcount;
+      expnt2 -= lzcount;
+
+      if (expnt2 >= 1)
+	/* Not denormal.  */
+	u.d[1].ieee.exponent = expnt2;
+      else
 	{
-	  int expnt2 = u.d[1].ieee.exponent - lzcount;
-	  if (expnt2 >= 1)
-	    {
-	      /* Not denormal.  Normalize and set low exponent.  */
-	      lo = lo << lzcount;
-	      u.d[1].ieee.exponent = expnt2;
-	    }
+	  /* Is denormal.  Note that biased exponent of 0 is treated
+	     as if it was 1, hence the extra shift.  */
+	  if (expnt2 > -53)
+	    lo >>= 1 - expnt2;
 	  else
-	    {
-	      /* Is denormal.  */
-	      lo = lo << (lzcount + expnt2);
-	      u.d[1].ieee.exponent = 0;
-	    }
+	    lo = 0;
 	}
     }
   else
-    {
-      u.d[1].ieee.negative = 0;
-      u.d[1].ieee.exponent = 0;
-    }
+    u.d[1].ieee.negative = 0;
 
-  u.d[1].ieee.mantissa1 = lo & ((1ULL << 32) - 1);
-  u.d[1].ieee.mantissa0 = (lo >> 32) & ((1ULL << 20) - 1);
-  u.d[0].ieee.mantissa1 = hi & ((1ULL << 32) - 1);
-  u.d[0].ieee.mantissa0 = (hi >> 32) & ((1ULL << 20) - 1);
+  u.d[1].ieee.mantissa1 = lo;
+  u.d[1].ieee.mantissa0 = lo >> 32;
+  u.d[0].ieee.mantissa1 = hi;
+  u.d[0].ieee.mantissa0 = hi >> 32;
   return u.ld;
 }
 
@@ -163,13 +205,13 @@ ldbl_canonicalize (double *a, double *aa)
   *aa = xl;
 }
 
-/* Simple inline nearbyint (double) function .
+/* Simple inline nearbyint (double) function.
    Only works in the default rounding mode
    but is useful in long double rounding functions.  */
 static inline double
 ldbl_nearbyint (double a)
 {
-  double two52 = 0x10000000000000LL;
+  double two52 = 0x1p52;
 
   if (__builtin_expect ((__builtin_fabs (a) < two52), 1))
     {
diff --git a/sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c b/sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c
index c3e42f2284..c96852dfd9 100644
--- a/sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c
+++ b/sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c
@@ -69,9 +69,9 @@ __mpn_construct_long_double (mp_srcptr frac_ptr, int expt, int sign)
       else
 	lzcount = __builtin_clzl ((long) val) + 32;
       if (hi)
-	lzcount = lzcount - 11;
+	lzcount = lzcount - (64 - 53);
       else
-	lzcount = lzcount + 42;
+	lzcount = lzcount + 53 - (64 - 53);
 
       if (lzcount > u.d[0].ieee.exponent)
 	{
@@ -97,29 +97,27 @@ __mpn_construct_long_double (mp_srcptr frac_ptr, int expt, int sign)
 	}
     }
 
-  if (lo != 0L)
+  if (lo != 0)
     {
-      /* hidden2 bit of low double controls rounding of the high double.
-	 If hidden2 is '1' and either the explicit mantissa is non-zero
+      /* hidden bit of low double controls rounding of the high double.
+	 If hidden is '1' and either the explicit mantissa is non-zero
 	 or hi is odd, then round up hi and adjust lo (2nd mantissa)
 	 plus change the sign of the low double to compensate.  */
       if ((lo & (1LL << 52)) != 0
-	  && ((hi & 1) != 0 || (lo & ((1LL << 52) - 1))))
+	  && ((hi & 1) != 0 || (lo & ((1LL << 52) - 1)) != 0))
 	{
 	  hi++;
-	  if ((hi & ((1LL << 52) - 1)) == 0)
+	  if ((hi & (1LL << 53)) != 0)
 	    {
-	      if ((hi & (1LL << 53)) != 0)
-		hi -= 1LL << 52;
+	      hi >>= 1;
 	      u.d[0].ieee.exponent++;
 	    }
 	  u.d[1].ieee.negative = !sign;
 	  lo = (1LL << 53) - lo;
 	}
 
-      /* The hidden bit of the lo mantissa is zero so we need to normalize
-	 it for the low double.  Shift it left until the hidden bit is '1'
-	 then adjust the 2nd exponent accordingly.  */
+      /* Normalize the low double.  Shift the mantissa left until
+	 the hidden bit is '1' and adjust the exponent accordingly.  */
 
       if (sizeof (lo) == sizeof (long))
 	lzcount = __builtin_clzl (lo);
@@ -127,24 +125,24 @@ __mpn_construct_long_double (mp_srcptr frac_ptr, int expt, int sign)
 	lzcount = __builtin_clzl ((long) (lo >> 32));
       else
 	lzcount = __builtin_clzl ((long) lo) + 32;
-      lzcount = lzcount - 11;
-      if (lzcount > 0)
-	{
-	  lo = lo << lzcount;
-	  exponent2 = exponent2 - lzcount;
-	}
+      lzcount = lzcount - (64 - 53);
+      lo <<= lzcount;
+      exponent2 -= lzcount;
+
       if (exponent2 > 0)
 	u.d[1].ieee.exponent = exponent2;
-      else
+      else if (exponent2 > -53)
 	lo >>= 1 - exponent2;
+      else
+	lo = 0;
     }
   else
     u.d[1].ieee.negative = 0;
 
-  u.d[1].ieee.mantissa1 = lo & 0xffffffffLL;
-  u.d[1].ieee.mantissa0 = (lo >> 32) & 0xfffff;
-  u.d[0].ieee.mantissa1 = hi & 0xffffffffLL;
-  u.d[0].ieee.mantissa0 = (hi >> 32) & ((1LL << (LDBL_MANT_DIG - 86)) - 1);
+  u.d[1].ieee.mantissa1 = lo;
+  u.d[1].ieee.mantissa0 = lo >> 32;
+  u.d[0].ieee.mantissa1 = hi;
+  u.d[0].ieee.mantissa0 = hi >> 32;
 
   return u.ld;
 }
diff --git a/sysdeps/ieee754/ldbl-128ibm/printf_fphex.c b/sysdeps/ieee754/ldbl-128ibm/printf_fphex.c
index 3fe8333020..453c2be7b8 100644
--- a/sysdeps/ieee754/ldbl-128ibm/printf_fphex.c
+++ b/sysdeps/ieee754/ldbl-128ibm/printf_fphex.c
@@ -42,15 +42,15 @@ do {									      \
 	lo <<= 1;							      \
       /* The lower double is normalized separately from the upper.  We	      \
 	 may need to adjust the lower manitissa to reflect this.  */	      \
-      ediff = u.d[0].ieee.exponent - u.d[1].ieee.exponent;		      \
-      if (ediff > 53 + 63)						      \
+      ediff = u.d[0].ieee.exponent - u.d[1].ieee.exponent - 53;		      \
+      if (ediff > 63)							      \
 	lo = 0;								      \
-      else if (ediff > 53)						      \
-	lo = lo >> (ediff - 53);					      \
-      else if (u.d[1].ieee.exponent == 0 && ediff < 53)			      \
-	lo = lo << (53 - ediff);					      \
+      else if (ediff > 0)						      \
+	lo = lo >> ediff;						      \
+      else if (ediff < 0)						      \
+	lo = lo << -ediff;						      \
       if (u.d[0].ieee.negative != u.d[1].ieee.negative			      \
-	  && (u.d[1].ieee.exponent != 0 || lo != 0L))			      \
+	  && lo != 0)							      \
 	{								      \
 	  lo = (1ULL << 60) - lo;					      \
 	  if (hi == 0L)							      \