Update.

1999-07-25  Jakub Jelinek  <jj@ultra.linux.cz>

	* sysdeps/sparc/sparc32/sparcv8/Makefile: -mv8 is deprecated, use
	-mcpu=v8.
	* sysdeps/sparc/sparc32/sparcv9/Makefile: Likewise.
	* sysdeps/sparc/sparc64/Makefile: Make %g7 register available for
	libc's private use (as assembly routine clobber it anyway).

1999-07-26  Andreas Jaeger  <aj@arthur.rhein-neckar.de>

	* README.template (configurations): The crypt add-on has a new
	ftp site.
	* manual/install.texi (Installation): Likewise.

10 files changed, 57 insertions, 29 deletions

diff --git a/ChangeLog b/ChangeLog
index 434e03de7d..7ce9a2d95e 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,17 @@
+1999-07-25  Jakub Jelinek  <jj@ultra.linux.cz>
+
+	* sysdeps/sparc/sparc32/sparcv8/Makefile: -mv8 is deprecated, use
+	-mcpu=v8.
+	* sysdeps/sparc/sparc32/sparcv9/Makefile: Likewise.
+	* sysdeps/sparc/sparc64/Makefile: Make %g7 register available for
+	libc's private use (as assembly routine clobber it anyway).
+
+1999-07-26  Andreas Jaeger  <aj@arthur.rhein-neckar.de>
+
+	* README.template (configurations): The crypt add-on has a new
+	ftp site.
+	* manual/install.texi (Installation): Likewise.
+
 1999-07-26  Ulrich Drepper  <drepper@cygnus.com>
 
 	* time/time.h: Add forward for struct sigevent.  Unix98 maybe
diff --git a/FAQ b/FAQ
index ac9fd12684..799be81e3f 100644
--- a/FAQ
+++ b/FAQ
@@ -640,8 +640,8 @@ functions together with glibc.
 
 The functions are available, as an add-on (see question 1.11).  People in the US
 may get it from the same place they got GNU libc from.  People outside the
-US should get the code from ftp.funet.fi [128.214.248.6] in the directory
-pub/gnu/funet, or another archive site outside the USA.  The README explains
+US should get the code from ftp.gwdg.de [134.76.11.100] in the directory
+pub/linux/glibc, or another archive site outside the USA.  The README explains
 how to install the sources.
 
 If you already have the crypt code on your system the reason for the failure
diff --git a/FAQ.in b/FAQ.in
index b368744f1f..fa4606df5a 100644
--- a/FAQ.in
+++ b/FAQ.in
@@ -458,8 +458,8 @@ functions together with glibc.
 
 The functions are available, as an add-on (see ?addon).  People in the US
 may get it from the same place they got GNU libc from.  People outside the
-US should get the code from ftp.funet.fi [128.214.248.6] in the directory
-pub/gnu/funet, or another archive site outside the USA.  The README explains
+US should get the code from ftp.gwdg.de [134.76.11.100] in the directory
+pub/linux/glibc, or another archive site outside the USA.  The README explains
 how to install the sources.
 
 If you already have the crypt code on your system the reason for the failure
diff --git a/INSTALL b/INSTALL
index a8dbd6aa43..8eb8cacde7 100644
--- a/INSTALL
+++ b/INSTALL
@@ -20,9 +20,10 @@ change in the future.  Get it from the same place you got the main
 bundle; the file is `glibc-linuxthreads-VERSION.tar.gz'.  Support for
 the `crypt' function is distributed separately because of United States
 export restrictions.  If you are outside the US or Canada, you must get
-`crypt' support from a site outside the US, such as `ftp.ifi.uio.no'.
-(Most non-US mirrors of `ftp.gnu.org' will have it too.)  The file you
-need is `glibc-crypt-VERSION.tar.gz'.
+`crypt' support from a site outside the US, such as `ftp.gwdg.de'.
+`ftp.gwdg.de' has the crypt distribution in `pub/linux/glibc'.  (Most
+non-US mirrors of `ftp.gnu.org' will have it too.)  The file you need
+is `glibc-crypt-VERSION.tar.gz'.
 
    You will need recent versions of several GNU tools: definitely GCC
 and GNU Make, and possibly others.  *Note Tools for Compilation::,
@@ -41,6 +42,10 @@ at the top level of the source tree.  In the scenario above, you'd type
 
      $ ../glibc-2.1.0/configure ARGS...
 
+   Please note that even if you're building in a separate build
+directory, the compiliation needs to modify a few files in the source
+directory, especially some files in the manual subdirectory.
+
 `configure' takes many options, but you can get away with knowing only
 two: `--prefix' and `--enable-add-ons'.  The `--prefix' option tells
 configure where you want glibc installed.  This defaults to
@@ -82,7 +87,7 @@ will be used, and CFLAGS sets optimization options for the compiler.
      given with no list, it enables all the add-on packages it finds.
      If you do not wish to use some add-on package that you have
      present in your source tree, give this option a list of the
-     add-ons that you _do_ want used, like this:
+     add-ons that you *do* want used, like this:
      `--enable-add-ons=crypt,linuxthreads'
 
 `--with-binutils=DIRECTORY'
@@ -98,10 +103,6 @@ will be used, and CFLAGS sets optimization options for the compiler.
      Use this option if your computer lacks hardware floating-point
      support and your operating system does not emulate an FPU.
 
-`--disable-static'
-     Don't build static libraries.  Static libraries aren't that useful
-     these days, but we recommend you build them in case you need them.
-
 `--disable-shared'
      Don't build shared libraries even if we could.  Not all systems
      support shared libraries; you need ELF support and (currently) the
@@ -168,7 +169,11 @@ Instead, edit the generated `Makefile' and uncomment the line
      # PARALLELMFLAGS = -j 4
 
 You can change the `4' to some other number as appropriate for your
-system.
+system.  Instead of changing the `Makefile', you could give this option
+directly to `make' and call it as, e.g.  `make PARALLELMFLAGS=-j4'.  If
+you're building in the source directory, you've got to use the latter
+approach since in this case no new `Makefile' is generated which you
+can change.
 
    To build and run some test programs which exercise some of the
 library facilities, type `make check'.  This should complete
@@ -202,10 +207,10 @@ or you will end up with a mixture of header files from both libraries,
 and you won't be able to compile anything.  You may also need to
 reconfigure GCC to work with the new library.  The easiest way to do
 that is to figure out the compiler switches to make it work again
-(`-Wl,-dynamic-linker=/lib/ld-linux.so.2' should work on Linux systems)
-and use them to recompile gcc.  You can also edit the specs file
-(`/usr/lib/gcc-lib/TARGET/VERSION/specs'), but that is a bit of a black
-art.
+(`-Wl,--dynamic-linker=/lib/ld-linux.so.2' should work on Linux
+systems) and use them to recompile gcc.  You can also edit the specs
+file (`/usr/lib/gcc-lib/TARGET/VERSION/specs'), but that is a bit of a
+black art.
 
    You can install glibc somewhere other than where you configured it
 to go by setting the `install_root' variable on the command line for
@@ -299,14 +304,14 @@ build the GNU C library:
      Perl is not required, but it is used if present to test the
      installation.  We may decide to use it elsewhere in the future.
 
-
 If you change any of the `configure.in' files you will also need
 
    * GNU `autoconf' 2.12 or higher
 
 and if you change any of the message translation files you will need
 
-   * GNU `gettext' 0.10.35 or later
+   * GNU `gettext' 0.10.35 or later (version 0.10.35 is a alpha release
+     and available via ftp from alpha.gnu.org/gnu)
 
 You may also need these packages if you upgrade your source tree using
 patches, although we try to avoid this.
@@ -402,7 +407,7 @@ installed there.
 library on your system against the new library for the sake of new code,
 but keep the old libraries around for old binaries to use.  This is
 complicated and difficult.  Consult the Glibc2 HOWTO at
-<http://www.imaxx.net/~thrytis/glibc> for details.
+`http://www.imaxx.net/~thrytis/glibc' for details.
 
    You cannot use `nscd' with 2.0 kernels, due to bugs in the
 kernel-side thread support.  `nscd' happens to hit these bugs
@@ -417,6 +422,13 @@ errors and omissions in this manual.  If you report them, they will get
 fixed.  If you don't, no one will ever know about them and they will
 remain unfixed for all eternity, if not longer.
 
+   It is a good idea to check first that the problem was not reported
+before.  Bugs are documented in two places: The file `BUGS' describes a
+number of well known bugs and the bug tracking system has a WWW
+interface at `http://www-gnats.gnu.org:8080/cgi-bin/wwwgnats.pl'.  The
+WWW interface gives you access to open and closed reports.  The closed
+reports normally include a patch or a hint on solving the problem.
+
    To report a bug, first you must find it.  Hopefully, this will be the
 hard part.  Once you've found a bug, make sure it's really a bug.  A
 good way to do this is to see if the GNU C library behaves the same way
@@ -441,9 +453,9 @@ you haven't installed it, will be in your build directory.  Send your
 test case, the results you got, the results you expected, and what you
 think the problem might be (if you've thought of anything).  `glibcbug'
 will insert the configuration information we need to see, and ship the
-report off to <bug-glibc@gnu.org>.  Don't send a message there
-directly; it is fed to a program that expects mail to be formatted in a
-particular way.  Use the script.
+report off to <bugs@gnu.org>.  Don't send a message there directly; it
+is fed to a program that expects mail to be formatted in a particular
+way.  Use the script.
 
    If you are not sure how a function should behave, and this manual
 doesn't tell you, that's a bug in the manual.  Report that too!  If the
diff --git a/README.template b/README.template
index 4f3dfdb0e1..a021aa8fae 100644
--- a/README.template
+++ b/README.template
@@ -57,10 +57,10 @@ for crypt; it is called `glibc-crypt-VERSION.tar.gz'.  You can just
 unpack the crypt distribution along with the rest of the C library and
 build; you can also build the library without getting crypt.  Users
 outside the USA can get the crypt distribution via anonymous FTP from
-ftp.funet.fi [128.214.248.6] in the directory pub/gnu/funet, or
+ftp.gwdg.de [134.76.11.100] in the directory pub/linux/glibc, or
 another archive site outside the USA.  Archive maintainers are
 encouraged to copy this distribution to their archives outside the
-USA.  Please get it from ftp.funet.fi; transferring this distribution
+USA.  Please get it from ftp.gwdg.de; transferring this distribution
 from ftp.gnu.org (or any other site in the USA) to a site outside the
 USA is in violation of US export laws.
 
diff --git a/manual/install.texi b/manual/install.texi
index f2555c71ed..1c516aa298 100644
--- a/manual/install.texi
+++ b/manual/install.texi
@@ -26,7 +26,8 @@ bundle; the file is @file{glibc-linuxthreads-@var{VERSION}.tar.gz}.
 Support for the @code{crypt} function is distributed separately because
 of United States export restrictions.  If you are outside the US or
 Canada, you must get @code{crypt} support from a site outside the US,
-such as @samp{ftp.ifi.uio.no}.
+such as @samp{ftp.gwdg.de}.  @samp{ftp.gwdg.de} has the crypt
+distribution in @code{pub/linux/glibc}.
 @c Check this please someone:
 (Most non-US mirrors of @samp{ftp.gnu.org} will have it too.)  The file
 you need is @file{glibc-crypt-@var{VERSION}.tar.gz}.
diff --git a/sysdeps/sparc/sparc32/sparcv8/Makefile b/sysdeps/sparc/sparc32/sparcv8/Makefile
index ed2fe8c597..2ff9853458 100644
--- a/sysdeps/sparc/sparc32/sparcv8/Makefile
+++ b/sysdeps/sparc/sparc32/sparcv8/Makefile
@@ -1 +1 @@
-sysdep-CFLAGS += -mv8
+sysdep-CFLAGS += -mcpu=v8
diff --git a/sysdeps/sparc/sparc32/sparcv9/Makefile b/sysdeps/sparc/sparc32/sparcv9/Makefile
index 3fef30cc6e..2844d8b514 100644
--- a/sysdeps/sparc/sparc32/sparcv9/Makefile
+++ b/sysdeps/sparc/sparc32/sparcv9/Makefile
@@ -1,4 +1,4 @@
-sysdep-CFLAGS += -mv8 -mtune=ultrasparc -Wa,-Av9a
+sysdep-CFLAGS += -mcpu=v8 -mtune=ultrasparc -Wa,-Av9a
 
 ifeq ($(subst gnulib,string,$(subdir)),string)
 ASFLAGS-.o += -Wa,-Av9a
diff --git a/sysdeps/sparc/sparc64/Makefile b/sysdeps/sparc/sparc64/Makefile
index 312e59ea21..96e5273ec5 100644
--- a/sysdeps/sparc/sparc64/Makefile
+++ b/sysdeps/sparc/sparc64/Makefile
@@ -1,2 +1,3 @@
 # The Sparc `long double' is a distinct type we support.
 long-double-fcts = yes
+sysdep-CFLAGS += -fcall-used-g7
diff --git a/time/Makefile b/time/Makefile
index 8986e96bef..948a48bcde 100644
--- a/time/Makefile
+++ b/time/Makefile
@@ -29,7 +29,7 @@ routines := offtime asctime clock ctime ctime_r difftime \
 	    tzfile getitimer setitimer			 \
 	    stime dysize timegm ftime			 \
 	    strptime getdate wcsftime			 \
-	    clock_getres clock_gettime clock_setres	 \
+	    clock_getres clock_gettime clock_settime	 \
 	    timer_create timer_delete timer_getoverr	 \
 	    timer_gettime timer_settime