* locale/newlocale.c (__newlocale): If setting all categories to "C",

	just return &_nl_C_locobj instead of copying it.
	* locale/freelocale.c (__freelocale): Check for &_nl_C_locobj.
	* locale/duplocale.c (__duplocale): Likewise.

2002-10-07  Roland McGrath  <roland@frob.com>

	* config.h.in (HAVE_I386_SET_GDT): New #undef.
	* sysdeps/mach/configure.in: Define it with new check for i386_set_gdt.
	* sysdeps/mach/configure: Regenerated.

2002-10-06  Franz Sirl  <Franz.Sirl-kernel@lauterbach.com>

	* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h (INLINE_SYSCALL):
	Add all necessary register outputs for syscall-clobbered registers.

2002-10-02  David Mosberger  <davidm@hpl.hp.com>

	* sysdeps/ia64/bzero.S: Rewritten by Sverre Jarp to tune for
	Itanium 2 (and Itanium).
	Fix unwind directives and make it fit in 80 columns.
	* sysdeps/ia64/memset.S: Ditto.
	* sysdeps/ia64/memcpy.S: Ditto.
	Move jump table to .rodata section.

2002-10-03  Roland McGrath  <roland@frob.com>

	* sysdeps/mach/hurd/i386/init-first.c (_hurd_stack_setup): Add
	clobbers to asm.

11 files changed, 1069 insertions, 242 deletions

diff --git a/ChangeLog b/ChangeLog
index 16ef96aeb8..b1b5601ddd 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,35 @@
+2002-10-08  Roland McGrath  <roland@redhat.com>
+
+	* locale/newlocale.c (__newlocale): If setting all categories to "C",
+	just return &_nl_C_locobj instead of copying it.
+	* locale/freelocale.c (__freelocale): Check for &_nl_C_locobj.
+	* locale/duplocale.c (__duplocale): Likewise.
+
+2002-10-07  Roland McGrath  <roland@frob.com>
+
+	* config.h.in (HAVE_I386_SET_GDT): New #undef.
+	* sysdeps/mach/configure.in: Define it with new check for i386_set_gdt.
+	* sysdeps/mach/configure: Regenerated.
+
+2002-10-06  Franz Sirl  <Franz.Sirl-kernel@lauterbach.com>
+
+	* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h (INLINE_SYSCALL):
+	Add all necessary register outputs for syscall-clobbered registers.
+
+2002-10-02  David Mosberger  <davidm@hpl.hp.com>
+
+	* sysdeps/ia64/bzero.S: Rewritten by Sverre Jarp to tune for
+	Itanium 2 (and Itanium).
+	Fix unwind directives and make it fit in 80 columns.
+	* sysdeps/ia64/memset.S: Ditto.
+	* sysdeps/ia64/memcpy.S: Ditto.
+	Move jump table to .rodata section.
+
+2002-10-03  Roland McGrath  <roland@frob.com>
+
+	* sysdeps/mach/hurd/i386/init-first.c (_hurd_stack_setup): Add
+	clobbers to asm.
+
 2002-10-10  Andreas Jaeger  <aj@suse.de>
 
 	* sysdeps/x86_64/_mcount.S: Restore correct registers.
diff --git a/config.h.in b/config.h.in
index b8a6c09270..86ebe1b750 100644
--- a/config.h.in
+++ b/config.h.in
@@ -179,6 +179,9 @@
 /* Mach/i386 specific: define if the `i386_io_perm_*' RPCs are available.  */
 #undef	HAVE_I386_IO_PERM_MODIFY
 
+/* Mach/i386 specific: define if the `i386_set_gdt' RPC is available.  */
+#undef	HAVE_I386_SET_GDT
+
 /*
  */
 
diff --git a/locale/duplocale.c b/locale/duplocale.c
index 2fa29d14d6..77dfc01046 100644
--- a/locale/duplocale.c
+++ b/locale/duplocale.c
@@ -33,6 +33,10 @@ __libc_lock_define (extern , __libc_setlocale_lock attribute_hidden)
 __locale_t
 __duplocale (__locale_t dataset)
 {
+  /* This static object is returned for newlocale (LC_ALL_MASK, "C").  */
+  if (dataset == &_nl_C_locobj)
+    return dataset;
+
   __locale_t result;
   int cnt;
   size_t names_len = 0;
diff --git a/locale/freelocale.c b/locale/freelocale.c
index ba0ae85d84..ec169bcb66 100644
--- a/locale/freelocale.c
+++ b/locale/freelocale.c
@@ -34,6 +34,10 @@ __freelocale (__locale_t dataset)
 {
   int cnt;
 
+  /* This static object is returned for newlocale (LC_ALL_MASK, "C").  */
+  if (dataset == &_nl_C_locobj)
+    return;
+
   /* We modify global data (the usage counts).  */
   __libc_lock_lock (__libc_setlocale_lock);
 
diff --git a/locale/newlocale.c b/locale/newlocale.c
index 3b8676ceeb..1131f62c0b 100644
--- a/locale/newlocale.c
+++ b/locale/newlocale.c
@@ -60,6 +60,17 @@ __newlocale (int category_mask, const char *locale, __locale_t base)
   if (locale == NULL)
     ERROR_RETURN;
 
+  if (base == &_nl_C_locobj)
+    /* We're to modify BASE, returned for a previous call with "C".
+       We can't really modify the read-only structure, so instead
+       start over by copying it.  */
+    base = NULL;
+
+  if ((base == NULL || category_mask == (1 << __LC_LAST) - 1 - (1 << LC_ALL))
+      && (category_mask == 0 || !strcmp (locale, "C")))
+    /* Asking for the "C" locale needn't allocate a new object.  */
+    return &_nl_C_locobj;
+
   /* Allocate memory for the result.  */
   if (base != NULL)
     result = *base;
diff --git a/sysdeps/ia64/bzero.S b/sysdeps/ia64/bzero.S
index 3225ed4975..bcca41d5e9 100644
--- a/sysdeps/ia64/bzero.S
+++ b/sysdeps/ia64/bzero.S
@@ -1,7 +1,8 @@
 /* Optimized version of the standard bzero() function.
    This file is part of the GNU C Library.
    Copyright (C) 2000, 2001, 2002 Free Software Foundation, Inc.
-   Contributed by Dan Pop <Dan.Pop@cern.ch>.
+   Contributed by Dan Pop for Itanium <Dan.Pop@cern.ch>.
+   Rewritten for McKinley by Sverre Jarp, HP Labs/CERN <Sverre.Jarp@cern.ch>
 
    The GNU C Library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
@@ -25,8 +26,11 @@
         in1:    count
 
    The algorithm is fairly straightforward: set byte by byte until we
-   we get to a word aligned address, then set word by word as much as
-   possible; the remaining few bytes are set one by one.  */
+   we get to a 16B-aligned address, then loop on 128 B chunks using an
+   early store as prefetching, then loop on 32B chucks, then clear remaining
+   words, finally clear remaining bytes.
+   Since a stf.spill f0 can store 16B in one go, we use this instruction
+   to get peak speed.  */
 
 #include <sysdep.h>
 #undef ret
@@ -34,62 +38,278 @@
 #define dest		in0
 #define	cnt		in1
 
-#define save_pfs 	loc0
-#define ptr1		loc1
-#define ptr2		loc2
-#define tmp		loc3
-#define	loopcnt		loc4
-#define save_lc		loc5
+#define tmp		r31
+#define save_lc		r30
+#define ptr0		r29
+#define ptr1		r28
+#define ptr2		r27
+#define ptr3		r26
+#define ptr9 		r24
+#define	loopcnt		r23
+#define linecnt		r22
+#define bytecnt		r21
 
-ENTRY(__bzero)
+// This routine uses only scratch predicate registers (p6 - p15)
+#define p_scr		p6	// default register for same-cycle branches
+#define p_unalgn	p9
+#define p_y		p11
+#define p_n		p12
+#define p_yy		p13
+#define p_nn		p14
+
+#define movi0		mov
+
+#define MIN1		15
+#define MIN1P1HALF	8
+#define LINE_SIZE	128
+#define LSIZE_SH        7			// shift amount
+#define PREF_AHEAD	8
+
+#define USE_FLP
+#if defined(USE_INT)
+#define store		st8
+#define myval		r0
+#elif defined(USE_FLP)
+#define store		stf8
+#define myval		f0
+#endif
+
+.align	64
+ENTRY(bzero)
+{ .mmi
 	.prologue
-	alloc	save_pfs = ar.pfs, 2, 6, 0, 0
-	.save ar.lc, save_lc
-	mov	save_lc = ar.lc
+	alloc	tmp = ar.pfs, 2, 0, 0, 0
+	lfetch.nt1 [dest]
+	.save   ar.lc, save_lc
+	movi0	save_lc = ar.lc
+} { .mmi
 	.body
-	mov	ret0 = dest
-	and	tmp = 7, dest
-	cmp.eq	p6, p0 = cnt, r0
-(p6)	br.cond.spnt .restore_and_exit ;;
+	mov	ret0 = dest		// return value
+	nop.m	0
+	cmp.eq	p_scr, p0 = cnt, r0
+;; }
+{ .mmi
+	and	ptr2 = -(MIN1+1), dest	// aligned address
+	and	tmp = MIN1, dest	// prepare to check for alignment
+	tbit.nz p_y, p_n = dest, 0	// Do we have an odd address? (M_B_U)
+} { .mib
 	mov	ptr1 = dest
-	sub	loopcnt = 8, tmp
-	cmp.gt	p6, p0 = 16, cnt
-(p6)	br.cond.spnt .set_few;;
-	cmp.eq	p6, p0 = tmp, r0
-(p6)	br.cond.sptk .dest_aligned
-	sub	cnt = cnt, loopcnt
-	adds	loopcnt = -1, loopcnt;;
-	mov	ar.lc = loopcnt;;
-.l1:
-	st1	[ptr1] = r0, 1
-	br.cloop.dptk	.l1 ;;
-.dest_aligned:
-	adds	ptr2 = 8, ptr1
-	shr.u	loopcnt = cnt, 4 ;;	// loopcnt = cnt / 16
-	cmp.eq	p6, p0 = loopcnt, r0
-(p6)	br.cond.spnt	.one_more
-	and	cnt = 0xf, cnt		// compute the remaining cnt
-	adds	loopcnt = -1, loopcnt;;
-	mov     ar.lc = loopcnt;;
-.l2:
-	st8	[ptr1] = r0, 16
-	st8	[ptr2] = r0, 16
-	br.cloop.dptk .l2
-	cmp.le	p6, p0 = 8, cnt	;;
-.one_more:
-(p6)	st8     [ptr1] = r0, 8
-(p6)	adds	cnt = -8, cnt ;;
-	cmp.eq	p6, p0 = cnt, r0
-(p6)	br.cond.spnt	.restore_and_exit
-.set_few:
-	adds	loopcnt = -1, cnt;;
-	mov	ar.lc = loopcnt;;
-.l3:
-	st1     [ptr1] = r0, 1
-	br.cloop.dptk   .l3 ;;
+	nop.i	0
+(p_scr)	br.ret.dpnt.many rp		// return immediately if count = 0
+;; }
+{ .mib
+	cmp.ne	p_unalgn, p0 = tmp, r0
+} { .mib					// NB: # of bytes to move is 1
+	sub	bytecnt = (MIN1+1), tmp		//     higher than loopcnt
+	cmp.gt	p_scr, p0 = 16, cnt		// is it a minimalistic task?
+(p_scr)	br.cond.dptk.many .move_bytes_unaligned	// go move just a few (M_B_U)
+;; }
+{ .mmi
+(p_unalgn) add	ptr1 = (MIN1+1), ptr2		// after alignment
+(p_unalgn) add	ptr2 = MIN1P1HALF, ptr2		// after alignment
+(p_unalgn) tbit.nz.unc p_y, p_n = bytecnt, 3	// should we do a st8 ?
+;; }
+{ .mib
+(p_y)	add	cnt = -8, cnt
+(p_unalgn) tbit.nz.unc p_yy, p_nn = bytecnt, 2	// should we do a st4 ?
+} { .mib
+(p_y)	st8	[ptr2] = r0,-4
+(p_n)	add	ptr2 = 4, ptr2
+;; }
+{ .mib
+(p_yy)	add	cnt = -4, cnt
+(p_unalgn) tbit.nz.unc p_y, p_n = bytecnt, 1	// should we do a st2 ?
+} { .mib
+(p_yy)	st4	[ptr2] = r0,-2
+(p_nn)	add	ptr2 = 2, ptr2
+;; }
+{ .mmi
+	mov	tmp = LINE_SIZE+1		// for compare
+(p_y)	add	cnt = -2, cnt
+(p_unalgn) tbit.nz.unc p_yy, p_nn = bytecnt, 0	// should we do a st1 ?
+} { .mmi
+	nop.m	0
+(p_y)	st2	[ptr2] = r0,-1
+(p_n)	add	ptr2 = 1, ptr2
+;; }
+
+{ .mmi
+(p_yy)	st1	[ptr2] = r0
+  	cmp.gt	p_scr, p0 = tmp, cnt		// is it a minimalistic task?
+} { .mbb
+(p_yy)	add	cnt = -1, cnt
+(p_scr)	br.cond.dpnt.many .fraction_of_line	// go move just a few
+;; }
+{ .mib
+	nop.m 	0
+	shr.u	linecnt = cnt, LSIZE_SH
+	nop.b	0
+;; }
+
+	.align 32
+.l1b:	// ------------------//  L1B: store ahead into cache lines; fill later
+{ .mmi
+	and	tmp = -(LINE_SIZE), cnt		// compute end of range
+	mov	ptr9 = ptr1			// used for prefetching
+	and	cnt = (LINE_SIZE-1), cnt	// remainder
+} { .mmi
+	mov	loopcnt = PREF_AHEAD-1		// default prefetch loop
+	cmp.gt	p_scr, p0 = PREF_AHEAD, linecnt	// check against actual value
+;; }
+{ .mmi
+(p_scr)	add	loopcnt = -1, linecnt
+	add	ptr2 = 16, ptr1	// start of stores (beyond prefetch stores)
+	add	ptr1 = tmp, ptr1	// first address beyond total range
+;; }
+{ .mmi
+	add	tmp = -1, linecnt	// next loop count
+	movi0	ar.lc = loopcnt
+;; }
+.pref_l1b:
+{ .mib
+	stf.spill [ptr9] = f0, 128	// Do stores one cache line apart
+	nop.i   0
+	br.cloop.dptk.few .pref_l1b
+;; }
+{ .mmi
+	add	ptr0 = 16, ptr2		// Two stores in parallel
+	movi0	ar.lc = tmp
+;; }
+.l1bx:
+ { .mmi
+	stf.spill [ptr2] = f0, 32
+	stf.spill [ptr0] = f0, 32
+ ;; }
+ { .mmi
+	stf.spill [ptr2] = f0, 32
+	stf.spill [ptr0] = f0, 32
+ ;; }
+ { .mmi
+	stf.spill [ptr2] = f0, 32
+	stf.spill [ptr0] = f0, 64
+ 	cmp.lt	p_scr, p0 = ptr9, ptr1	// do we need more prefetching?
+ ;; }
+{ .mmb
+	stf.spill [ptr2] = f0, 32
+(p_scr)	stf.spill [ptr9] = f0, 128
+	br.cloop.dptk.few .l1bx
+;; }
+{ .mib
+	cmp.gt  p_scr, p0 = 8, cnt	// just a few bytes left ?
+(p_scr)	br.cond.dpnt.many  .move_bytes_from_alignment
+;; }
+
+.fraction_of_line:
+{ .mib
+	add	ptr2 = 16, ptr1
+	shr.u	loopcnt = cnt, 5   	// loopcnt = cnt / 32
+;; }
+{ .mib
+	cmp.eq	p_scr, p0 = loopcnt, r0
+	add	loopcnt = -1, loopcnt
+(p_scr)	br.cond.dpnt.many .store_words
+;; }
+{ .mib
+	and	cnt = 0x1f, cnt		// compute the remaining cnt
+	movi0   ar.lc = loopcnt
+;; }
+	.align 32
+.l2:	// -----------------------------//  L2A:  store 32B in 2 cycles
+{ .mmb
+	store	[ptr1] = myval, 8
+	store	[ptr2] = myval, 8
+;; } { .mmb
+	store	[ptr1] = myval, 24
+	store	[ptr2] = myval, 24
+	br.cloop.dptk.many .l2
+;; }
+.store_words:
+{ .mib
+	cmp.gt	p_scr, p0 = 8, cnt	// just a few bytes left ?
+(p_scr)	br.cond.dpnt.many .move_bytes_from_alignment	// Branch
+;; }
+
+{ .mmi
+	store	[ptr1] = myval, 8	// store
+	cmp.le	p_y, p_n = 16, cnt	//
+	add	cnt = -8, cnt		// subtract
+;; }
+{ .mmi
+(p_y)	store	[ptr1] = myval, 8	// store
+(p_y)	cmp.le.unc p_yy, p_nn = 16, cnt
+(p_y)	add	cnt = -8, cnt		// subtract
+;; }
+{ .mmi					// store
+(p_yy)	store	[ptr1] = myval, 8
+(p_yy)	add	cnt = -8, cnt		// subtract
+;; }
+
+.move_bytes_from_alignment:
+{ .mib
+	cmp.eq	p_scr, p0 = cnt, r0
+	tbit.nz.unc p_y, p0 = cnt, 2	// should we terminate with a st4 ?
+(p_scr)	br.cond.dpnt.few .restore_and_exit
+;; }
+{ .mib
+(p_y)	st4	[ptr1] = r0,4
+	tbit.nz.unc p_yy, p0 = cnt, 1	// should we terminate with a st2 ?
+;; }
+{ .mib
+(p_yy)	st2	[ptr1] = r0,2
+	tbit.nz.unc p_y, p0 = cnt, 0	// should we terminate with a st1 ?
+;; }
+
+{ .mib
+(p_y)	st1	[ptr1] = r0
+;; }
 .restore_and_exit:
-	mov	ar.lc = save_lc
-	mov	ar.pfs = save_pfs
-	br.ret.sptk.many b0
-END(__bzero)
-weak_alias (__bzero, bzero)
+{ .mib
+	nop.m	0
+	movi0	ar.lc = save_lc
+	br.ret.sptk.many rp
+;; }
+
+.move_bytes_unaligned:
+{ .mmi
+       .pred.rel "mutex",p_y, p_n
+       .pred.rel "mutex",p_yy, p_nn
+(p_n)	cmp.le  p_yy, p_nn = 4, cnt
+(p_y)	cmp.le  p_yy, p_nn = 5, cnt
+(p_n)	add	ptr2 = 2, ptr1
+} { .mmi
+(p_y)	add	ptr2 = 3, ptr1
+(p_y)	st1	[ptr1] = r0, 1		// fill 1 (odd-aligned) byte
+(p_y)	add	cnt = -1, cnt		// [15, 14 (or less) left]
+;; }
+{ .mmi
+(p_yy)	cmp.le.unc p_y, p0 = 8, cnt
+	add	ptr3 = ptr1, cnt	// prepare last store
+	movi0	ar.lc = save_lc
+} { .mmi
+(p_yy)	st2	[ptr1] = r0, 4		// fill 2 (aligned) bytes
+(p_yy)	st2	[ptr2] = r0, 4		// fill 2 (aligned) bytes
+(p_yy)	add	cnt = -4, cnt		// [11, 10 (o less) left]
+;; }
+{ .mmi
+(p_y)	cmp.le.unc p_yy, p0 = 8, cnt
+	add	ptr3 = -1, ptr3		// last store
+	tbit.nz p_scr, p0 = cnt, 1	// will there be a st2 at the end ?
+} { .mmi
+(p_y)	st2	[ptr1] = r0, 4		// fill 2 (aligned) bytes
+(p_y)	st2	[ptr2] = r0, 4		// fill 2 (aligned) bytes
+(p_y)	add	cnt = -4, cnt		// [7, 6 (or less) left]
+;; }
+{ .mmi
+(p_yy)	st2	[ptr1] = r0, 4		// fill 2 (aligned) bytes
+(p_yy)	st2	[ptr2] = r0, 4		// fill 2 (aligned) bytes
+					// [3, 2 (or less) left]
+	tbit.nz p_y, p0 = cnt, 0	// will there be a st1 at the end ?
+} { .mmi
+(p_yy)	add	cnt = -4, cnt
+;; }
+{ .mmb
+(p_scr)	st2	[ptr1] = r0		// fill 2 (aligned) bytes
+(p_y)	st1	[ptr3] = r0		// fill last byte (using ptr3)
+	br.ret.sptk.many rp
+;; }
+END(bzero)
diff --git a/sysdeps/ia64/memcpy.S b/sysdeps/ia64/memcpy.S
index b49f99e286..257e1aa341 100644
--- a/sysdeps/ia64/memcpy.S
+++ b/sysdeps/ia64/memcpy.S
@@ -1,7 +1,8 @@
 /* Optimized version of the standard memcpy() function.
    This file is part of the GNU C Library.
    Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   Contributed by Dan Pop <Dan.Pop@cern.ch>.
+   Contributed by Dan Pop for Itanium <Dan.Pop@cern.ch>.
+   Rewritten for McKinley by Sverre Jarp, HP Labs/CERN <Sverre.Jarp@cern.ch>
 
    The GNU C Library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
@@ -26,27 +27,39 @@
         in2:    byte count
 
    An assembly implementation of the algorithm used by the generic C
-   version from glibc.  The case when all three arguments are multiples
-   of 8 is treated separatedly, for extra performance.
+   version from glibc.  The case when source and sest are aligned is
+   treated separately, for extra performance.
 
-   In this form, it assumes little endian mode.  For big endian mode,
+   In this form, memcpy assumes little endian mode.  For big endian mode,
    sh1 must be computed using an extra instruction: sub sh1 = 64, sh1
    and the order of r[MEMLAT] and r[MEMLAT+1] must be reverted in the
    shrp instruction.  */
 
+#define USE_LFETCH
+#define USE_FLP
 #include <sysdep.h>
 #undef ret
 
+#define LFETCH_DIST     500
+
+#define ALIGN_UNROLL_no   4 // no. of elements
+#define ALIGN_UNROLL_sh	  2 // (shift amount)
+
+#define MEMLAT	8
+#define Nrot	((4*(MEMLAT+2) + 7) & ~7)
+
 #define OP_T_THRES 	16
 #define OPSIZ 		8
 
-#define adest		r15
-#define saved_pr	r17
-#define saved_lc	r18
+#define loopcnt		r14
+#define elemcnt		r15
+#define saved_pr	r16
+#define saved_lc	r17
+#define adest		r18
 #define dest		r19
-#define src		r20
-#define len		r21
-#define asrc		r22
+#define asrc		r20
+#define src		r21
+#define len		r22
 #define tmp2		r23
 #define tmp3		r24
 #define	tmp4		r25
@@ -54,113 +67,339 @@
 #define ploop56		r27
 #define	loopaddr	r28
 #define	sh1		r29
-#define loopcnt		r30
-#define	value		r31
-
-#define LOOP(shift)							\
-		.align	32 ;						\
-.loop##shift##:								\
-(p[0])		ld8	r[0] = [asrc], 8 ;	/* w1 */		\
-(p[MEMLAT+1])	st8	[dest] = value, 8 ;				\
-(p[MEMLAT])	shrp	value = r[MEMLAT], r[MEMLAT+1], shift ;		\
-		nop.b	0 ;						\
-		nop.b	0 ;						\
-		br.ctop.sptk .loop##shift ;				\
-		br.cond.sptk .cpyfew ; /* deal with the remaining bytes */
-
-#define MEMLAT	21
-#define Nrot	(((2*MEMLAT+3) + 7) & ~7)
+#define ptr1		r30
+#define ptr2		r31
+
+#define movi0 		mov
+
+#define p_scr		p6
+#define p_xtr		p7
+#define p_nxtr		p8
+#define p_few		p9
+
+#if defined(USE_FLP)
+#define load		ldf8
+#define store		stf8
+#define tempreg		f6
+#define the_r		fr
+#define the_s		fs
+#define the_t		ft
+#define the_q		fq
+#define the_w		fw
+#define the_x		fx
+#define the_y		fy
+#define the_z		fz
+#elif defined(USE_INT)
+#define load		ld8
+#define store		st8
+#define tempreg		tmp2
+#define the_r		r
+#define the_s		s
+#define the_t		t
+#define the_q		q
+#define the_w		w
+#define the_x		x
+#define the_y		y
+#define the_z		z
+#endif
+
+
+#if defined(USE_LFETCH)
+#define LOOP(shift)						\
+		.align	32 ;					\
+.loop##shift##:							\
+{ .mmb								\
+(p[0])	ld8.nt1	r[0] = [asrc], 8 ;				\
+(p[0])	lfetch.nt1 [ptr1], 16 ;				\
+	nop.b 0 ;						\
+} { .mib							\
+(p[MEMLAT+1]) st8 [dest] = tmp3, 8 ;				\
+(p[MEMLAT]) shrp tmp3 = r[MEMLAT], s[MEMLAT+1], shift ;		\
+ 	nop.b 0 ;;						\
+ } { .mmb							\
+(p[0])	ld8.nt1	s[0] = [asrc], 8 ;				\
+(p[0])	lfetch.nt1	[ptr2], 16 ;			\
+	nop.b 0 ;						\
+} { .mib							\
+(p[MEMLAT+1]) st8 [dest] = tmp4, 8 ;				\
+(p[MEMLAT]) shrp tmp4 = s[MEMLAT], r[MEMLAT], shift ;		\
+	br.ctop.sptk.many .loop##shift 				\
+;; }								\
+{ .mib								\
+	br.cond.sptk.many .copy_bytes ; /* deal with the remaining bytes */  \
+}
+#else
+#define LOOP(shift)						\
+		.align	32 ;					\
+.loop##shift##:							\
+{ .mmb								\
+(p[0])	ld8.nt1	r[0] = [asrc], 8 ;				\
+	nop.b 0 ;						\
+} { .mib							\
+(p[MEMLAT+1]) st8 [dest] = tmp3, 8 ;				\
+(p[MEMLAT]) shrp tmp3 = r[MEMLAT], s[MEMLAT+1], shift ;		\
+ 	nop.b 0 ;;						\
+ } { .mmb							\
+(p[0])	ld8.nt1	s[0] = [asrc], 8 ;				\
+	nop.b 0 ;						\
+} { .mib							\
+(p[MEMLAT+1]) st8 [dest] = tmp4, 8 ;				\
+(p[MEMLAT]) shrp tmp4 = s[MEMLAT], r[MEMLAT], shift ;		\
+	br.ctop.sptk.many .loop##shift 				\
+;; }								\
+{ .mib								\
+	br.cond.sptk.many .copy_bytes ; /* deal with the remaining bytes */  \
+}
+#endif
+
 
 ENTRY(memcpy)
+{ .mmi
 	.prologue
 	alloc 	r2 = ar.pfs, 3, Nrot - 3, 0, Nrot
-	.rotr	r[MEMLAT + 2], q[MEMLAT + 1]
-	.rotp	p[MEMLAT + 2]
-	mov	ret0 = in0		// return value = dest
-	.save pr, saved_pr
-	mov	saved_pr = pr		// save the predicate registers
-	.save ar.lc, saved_lc
-        mov 	saved_lc = ar.lc	// save the loop counter
-	.body
-	or	tmp3 = in0, in1 ;;	// tmp3 = dest | src
-	or	tmp3 = tmp3, in2	// tmp3 = dest | src | len
+	.rotr	r[MEMLAT+1], s[MEMLAT+2], q[MEMLAT+1], t[MEMLAT+1]
+	.rotp	p[MEMLAT+2]
+	.rotf	fr[MEMLAT+1], fq[MEMLAT+1], fs[MEMLAT+1], ft[MEMLAT+1]
+	mov	ret0 = in0		// return tmp2 = dest
+	.save   pr, saved_pr
+	movi0	saved_pr = pr		// save the predicate registers
+} { .mmi
+	and	tmp4 = 7, in0 		// check if destination is aligned
 	mov 	dest = in0		// dest
 	mov 	src = in1		// src
+;; }
+{ .mii
+	cmp.eq	p_scr, p0 = in2, r0	// if (len == 0)
+	.save   ar.lc, saved_lc
+        movi0 	saved_lc = ar.lc	// save the loop counter
+	.body
+	cmp.ge	p_few, p0 = OP_T_THRES, in2 // is len <= OP_T_THRESH
+} { .mbb
 	mov	len = in2		// len
-	sub	tmp2 = r0, in0		// tmp2 = -dest
-	cmp.eq	p6, p0 = in2, r0	// if (len == 0)
-(p6)	br.cond.spnt .restore_and_exit;;// 	return dest;
-	and	tmp4 = 7, tmp3 		// tmp4 = (dest | src | len) & 7
-	shr.u	loopcnt = len, 4 ;;	// loopcnt = len / 16
-	cmp.ne	p6, p0 = tmp4, r0	// if ((dest | src | len) & 7 != 0)
-(p6)	br.cond.sptk .next		//	goto next;
-
-// The optimal case, when dest, src and len are all multiples of 8
-
-	and	tmp3 = 0xf, len		// tmp3 = len % 16
-	mov	pr.rot = 1 << 16	// set rotating predicates
-	mov	ar.ec = MEMLAT + 1 ;;	// set the epilog counter
-	cmp.ne	p6, p0 = tmp3, r0	// do we have to copy an extra word?
-	adds	loopcnt = -1, loopcnt;;	// --loopcnt
-(p6)	ld8	value = [src], 8;;	
-(p6)	st8	[dest] = value, 8	// copy the "extra" word
-	mov	ar.lc = loopcnt 	// set the loop counter		 
-	cmp.eq	p6, p0 = 8, len
-(p6)	br.cond.spnt .restore_and_exit;;// there was only one word to copy
-	adds	adest = 8, dest
-	adds	asrc = 8, src ;;
+(p_scr)	br.cond.dpnt.few .restore_and_exit // 	Branch no. 1: return dest
+(p_few) br.cond.dpnt.many .copy_bytes	// Branch no. 2: copy byte by byte
+;; }
+{ .mmi
+#if defined(USE_LFETCH)
+	lfetch.nt1 [dest]		//
+	lfetch.nt1 [src]		//
+#endif
+	shr.u	elemcnt = len, 3	// elemcnt = len / 8
+} { .mib
+	cmp.eq	p_scr, p0 = tmp4, r0	// is destination aligned?
+	sub	loopcnt = 7, tmp4	//
+(p_scr) br.cond.dptk.many .dest_aligned
+;; }
+{ .mmi
+	ld1	tmp2 = [src], 1		//
+	sub	len = len, loopcnt, 1	// reduce len
+	movi0	ar.lc = loopcnt		//
+} { .mib
+	cmp.ne  p_scr, p0 = 0, loopcnt	// avoid loading beyond end-point
+;; }
+
+.l0:	// ---------------------------- // L0: Align src on 8-byte boundary
+{ .mmi
+	st1	[dest] = tmp2, 1	//
+(p_scr)	ld1	tmp2 = [src], 1		//
+} { .mib
+	cmp.lt	p_scr, p0 = 1, loopcnt	// avoid load beyond end-point
+	add	loopcnt = -1, loopcnt
+	br.cloop.dptk.few .l0		//
+;; }
+
+.dest_aligned:
+{ .mmi
+	and	tmp4 = 7, src		// ready for alignment check
+	shr.u	elemcnt = len, 3	// elemcnt = len / 8
+;; }
+{ .mib
+	cmp.ne	p_scr, p0 = tmp4, r0	// is source also aligned
+	tbit.nz p_xtr, p_nxtr = src, 3	// prepare a separate move if src
+} { .mib				// is not 16B aligned
+	add	ptr2 = LFETCH_DIST, dest	// prefetch address
+	add	ptr1 = LFETCH_DIST, src
+(p_scr) br.cond.dptk.many .src_not_aligned
+;; }
+
+// The optimal case, when dest, and src are aligned
+
+.both_aligned:
+{ .mmi
+	.pred.rel "mutex",p_xtr,p_nxtr
+(p_xtr)	cmp.gt  p_scr, p0 = ALIGN_UNROLL_no+1, elemcnt // Need N + 1 to qualify
+(p_nxtr) cmp.gt p_scr, p0 = ALIGN_UNROLL_no, elemcnt  // Need only N to qualify
+	movi0	pr.rot = 1 << 16	// set rotating predicates
+} { .mib
+(p_scr) br.cond.dpnt.many .copy_full_words
+;; }
+
+{ .mmi
+(p_xtr)	load	tempreg = [src], 8
+(p_xtr) add 	elemcnt = -1, elemcnt
+	movi0	ar.ec = MEMLAT + 1	// set the epilog counter
+;; }
+{ .mmi
+(p_xtr) add	len = -8, len		//
+	add 	asrc = 16, src 		// one bank apart (for USE_INT)
+	shr.u	loopcnt = elemcnt, ALIGN_UNROLL_sh  // cater for unrolling
+;;}
+{ .mmi
+	add	loopcnt = -1, loopcnt
+(p_xtr)	store	[dest] = tempreg, 8	// copy the "extra" word
+	nop.i	0
+;; }
+{ .mib
+	add	adest = 16, dest
+	movi0	ar.lc = loopcnt 	// set the loop counter
+;; }
+
 	.align	32
-.l0:
-(p[0])		ld8	r[0] = [src], 16
-(p[0])		ld8	q[0] = [asrc], 16
-(p[MEMLAT])	st8	[dest] = r[MEMLAT], 16
-(p[MEMLAT])	st8	[adest] = q[MEMLAT], 16
-		br.ctop.dptk .l0 ;;
-
-	mov	pr = saved_pr, -1	// restore the predicate registers
-	mov	ar.lc = saved_lc	// restore the loop counter
+#if defined(USE_FLP)
+.l1: // ------------------------------- // L1: Everything a multiple of 8
+{ .mmi
+#if defined(USE_LFETCH)
+(p[0])	lfetch.nt1 [ptr2],32
+#endif
+(p[0])	ldfp8	the_r[0],the_q[0] = [src], 16
+(p[0])	add	len = -32, len
+} {.mmb
+(p[MEMLAT]) store [dest] = the_r[MEMLAT], 8
+(p[MEMLAT]) store [adest] = the_s[MEMLAT], 8
+;; }
+{ .mmi
+#if defined(USE_LFETCH)
+(p[0])	lfetch.nt1 [ptr1],32
+#endif
+(p[0])	ldfp8	the_s[0], the_t[0] = [src], 16
+} {.mmb
+(p[MEMLAT]) store [dest] = the_q[MEMLAT], 24
+(p[MEMLAT]) store [adest] = the_t[MEMLAT], 24
+	br.ctop.dptk.many .l1
+;; }
+#elif defined(USE_INT)
+.l1: // ------------------------------- // L1: Everything a multiple of 8
+{ .mmi
+(p[0])	load	the_r[0] = [src], 8
+(p[0])	load	the_q[0] = [asrc], 8
+(p[0])	add	len = -32, len
+} {.mmb
+(p[MEMLAT]) store [dest] = the_r[MEMLAT], 8
+(p[MEMLAT]) store [adest] = the_q[MEMLAT], 8
+;; }
+{ .mmi
+(p[0])	load	the_s[0]  = [src], 24
+(p[0])	load	the_t[0] = [asrc], 24
+} {.mmb
+(p[MEMLAT]) store [dest] = the_s[MEMLAT], 24
+(p[MEMLAT]) store [adest] = the_t[MEMLAT], 24
+#if defined(USE_LFETCH)
+;; }
+{ .mmb
+(p[0])	lfetch.nt1 [ptr2],32
+(p[0])	lfetch.nt1 [ptr1],32
+#endif
+	br.ctop.dptk.many .l1
+;; }
+#endif
+
+.copy_full_words:
+{ .mib
+	cmp.gt	p_scr, p0 = 8, len	//
+	shr.u	elemcnt = len, 3	//
+(p_scr) br.cond.dpnt.many .copy_bytes
+;; }
+{ .mii
+	load	tempreg = [src], 8
+	add	loopcnt = -1, elemcnt	//
+;; }
+{ .mii
+	cmp.ne	p_scr, p0 = 0, loopcnt	//
+	mov	ar.lc = loopcnt		//
+;; }
+
+.l2: // ------------------------------- // L2: Max 4 words copied separately
+{ .mmi
+	store	[dest] = tempreg, 8
+(p_scr)	load	tempreg = [src], 8	//
+	add	len = -8, len
+} { .mib
+	cmp.lt	p_scr, p0 = 1, loopcnt	// avoid load beyond end-point
+	add	loopcnt = -1, loopcnt
+	br.cloop.dptk.few  .l2
+;; }
+
+.copy_bytes:
+{ .mib
+	cmp.eq	p_scr, p0 = len, r0	// is len == 0 ?
+	add	loopcnt = -1, len	// len--;
+(p_scr)	br.cond.spnt	.restore_and_exit
+;; }
+{ .mii
+	ld1	tmp2 = [src], 1
+	movi0	ar.lc = loopcnt
+	cmp.ne	p_scr, p0 = 0, loopcnt	// avoid load beyond end-point
+;; }
+
+.l3: // ------------------------------- // L3: Final byte move
+{ .mmi
+	st1	[dest] = tmp2, 1
+(p_scr)	ld1	tmp2 = [src], 1
+} { .mib
+	cmp.lt	p_scr, p0 = 1, loopcnt	// avoid load beyond end-point
+	add	loopcnt = -1, loopcnt
+	br.cloop.dptk.few  .l3
+;; }
+
+.restore_and_exit:
+{ .mmi
+	movi0	pr = saved_pr, -1	// restore the predicate registers
+;; }
+{ .mib
+	movi0	ar.lc = saved_lc	// restore the loop counter
 	br.ret.sptk.many b0
-.next:
-	cmp.ge	p6, p0 = OP_T_THRES, len	// is len <= OP_T_THRES
-	and	loopcnt = 7, tmp2 		// loopcnt = -dest % 8
-(p6)	br.cond.spnt	.cpyfew			// copy byte by byte
-	;;
-	cmp.eq	p6, p0 = loopcnt, r0
-(p6)	br.cond.sptk	.dest_aligned
-	sub	len = len, loopcnt	// len -= -dest % 8
-	adds	loopcnt = -1, loopcnt	// --loopcnt
-	;;
-	mov	ar.lc = loopcnt
-.l1:					// copy -dest % 8 bytes
-	ld1	value = [src], 1	// value = *src++
-	;;
-	st1	[dest] = value, 1	// *dest++ = value  
-	br.cloop.dptk .l1 ;;	
-.dest_aligned:
+;; }
+
+
+.src_not_aligned:
+{ .mmi
+	cmp.gt	p_scr, p0 = 16, len
 	and	sh1 = 7, src 		// sh1 = src % 8
-	and	tmp2 = -8, len   	// tmp2 = len & -OPSIZ
-	and	asrc = -8, src		// asrc = src & -OPSIZ  -- align src
-	shr.u	loopcnt = len, 3	// loopcnt = len / 8
-	and	len = 7, len;;		// len = len % 8
-	adds	loopcnt = -1, loopcnt	// --loopcnt
-	addl	tmp4 = @ltoff(.table), gp 
-	addl	tmp3 = @ltoff(.loop56), gp
-	mov     ar.ec = MEMLAT + 1	// set EC
-	mov     pr.rot = 1 << 16;;	// set rotating predicates
-	mov	ar.lc = loopcnt		// set LC
-	cmp.eq  p6, p0 = sh1, r0 	// is the src aligned?
-(p6)    br.cond.sptk .src_aligned
-	add	src = src, tmp2		// src += len & -OPSIZ
+	shr.u	loopcnt = len, 4	// element-cnt = len / 16
+} { .mib
+	add	tmp4 = @ltoff(.table), gp
+	add 	tmp3 = @ltoff(.loop56), gp
+(p_scr)	br.cond.dpnt.many .copy_bytes	// do byte by byte if too few
+;; }
+{ .mmi
+	and	asrc = -8, src		// asrc = (-8) -- align src for loop
+	add 	loopcnt = -1, loopcnt	// loopcnt--
 	shl	sh1 = sh1, 3		// sh1 = 8 * (src % 8)
+} { .mmi
+	ld8	ptable = [tmp4]		// ptable = &table
 	ld8	ploop56 = [tmp3]	// ploop56 = &loop56
-	ld8	ptable = [tmp4];;	// ptable = &table
-	add	tmp3 = ptable, sh1;;	// tmp3 = &table + sh1
-	mov	ar.ec = MEMLAT + 1 + 1 // one more pass needed
-	ld8	tmp4 = [tmp3];;		// tmp4 = loop offset
+	and	tmp2 = -16, len		// tmp2 = len & -OPSIZ
+;; }
+{ .mmi
+	add	tmp3 = ptable, sh1	// tmp3 = &table + sh1
+	add	src = src, tmp2		// src += len & (-16)
+	movi0	ar.lc = loopcnt		// set LC
+;; }
+{ .mmi
+	ld8	tmp4 = [tmp3]		// tmp4 = loop offset
+	sub	len = len, tmp2		// len -= len & (-16)
+	movi0	ar.ec = MEMLAT + 2 	// one more pass needed
+;; }
+{ .mmi
+	ld8	s[1] = [asrc], 8	// preload
 	sub	loopaddr = ploop56,tmp4	// loopadd = &loop56 - loop offset
-	ld8	r[1] = [asrc], 8;;	// w0
-	mov	b6 = loopaddr;;
+	movi0   pr.rot = 1 << 16	// set rotating predicates
+;; }
+{ .mib
+	nop.m	0
+	movi0	b6 = loopaddr
 	br	b6			// jump to the appropriate loop
+;; }
 
 	LOOP(8)
 	LOOP(16)
@@ -169,26 +408,9 @@ ENTRY(memcpy)
 	LOOP(40)
 	LOOP(48)
 	LOOP(56)
-	
-.src_aligned:
-.l3:
-(p[0])		ld8	r[0] = [src], 8
-(p[MEMLAT])	st8	[dest] = r[MEMLAT], 8
-		br.ctop.dptk .l3 ;;
-.cpyfew:
-	cmp.eq	p6, p0 = len, r0	// is len == 0 ?
-	adds	len = -1, len		// --len;
-(p6)	br.cond.spnt	.restore_and_exit ;;
-	mov	ar.lc = len
-.l4:
-	ld1	value = [src], 1
-	;;
-	st1	[dest] = value, 1
-	br.cloop.dptk	.l4 ;;
-.restore_and_exit:
-	mov     pr = saved_pr, -1    	// restore the predicate registers
-	mov 	ar.lc = saved_lc	// restore the loop counter
-	br.ret.sptk.many b0
+END(memcpy)
+
+	.rodata
 	.align 8
 .table:
 	data8	0			// dummy entry
@@ -199,5 +421,3 @@ ENTRY(memcpy)
 	data8	.loop56 - .loop40
 	data8	.loop56 - .loop48
 	data8	.loop56 - .loop56
-
-END(memcpy)
diff --git a/sysdeps/ia64/memset.S b/sysdeps/ia64/memset.S
index 56db66fd0b..2257b16047 100644
--- a/sysdeps/ia64/memset.S
+++ b/sysdeps/ia64/memset.S
@@ -1,7 +1,8 @@
 /* Optimized version of the standard memset() function.
    This file is part of the GNU C Library.
-   Copyright (C) 2000, 2001 Free Software Foundation, Inc.
-   Contributed by Dan Pop <Dan.Pop@cern.ch>.
+   Copyright (C) 2000, 2001, 2002 Free Software Foundation, Inc.
+   Contributed by Dan Pop for Itanium <Dan.Pop@cern.ch>.
+   Rewritten for McKinley by Sverre Jarp, HP Labs/CERN <Sverre.Jarp@cern.ch>
 
    The GNU C Library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
@@ -19,80 +20,373 @@
    02111-1307 USA.  */
 
 /* Return: dest
-  
+
    Inputs:
         in0:    dest
         in1:    value
         in2:    count
 
    The algorithm is fairly straightforward: set byte by byte until we
-   we get to a word aligned address, then set word by word as much as
-   possible; the remaining few bytes are set one by one.  */
+   we get to a 16B-aligned address, then loop on 128 B chunks using an
+   early store as prefetching, then loop on 32B chucks, then clear remaining
+   words, finally clear remaining bytes.
+   Since a stf.spill f0 can store 16B in one go, we use this instruction
+   to get peak speed when value = 0.  */
 
 #include <sysdep.h>
 #undef ret
 
 #define dest		in0
-#define byteval		in1
+#define value		in1
 #define	cnt		in2
 
-#define save_pfs 	loc0
-#define ptr1		loc1
-#define ptr2		loc2
-#define tmp		loc3
-#define	loopcnt		loc4
-#define save_lc		loc5
-#define wordval		loc6
+#define tmp		r31
+#define save_lc		r30
+#define ptr0		r29
+#define ptr1		r28
+#define ptr2		r27
+#define ptr3		r26
+#define ptr9 		r24
+#define	loopcnt		r23
+#define linecnt		r22
+#define bytecnt		r21
+
+#define fvalue		f6
+
+// This routine uses only scratch predicate registers (p6 - p15)
+#define p_scr		p6			// default register for same-cycle branches
+#define p_nz		p7
+#define p_zr		p8
+#define p_unalgn	p9
+#define p_y		p11
+#define p_n		p12
+#define p_yy		p13
+#define p_nn		p14
+
+#define movi0		mov
 
+#define MIN1		15
+#define MIN1P1HALF	8
+#define LINE_SIZE	128
+#define LSIZE_SH        7			// shift amount
+#define PREF_AHEAD	8
+
+#define USE_FLP
+#if defined(USE_INT)
+#define store		st8
+#define myval           value
+#elif defined(USE_FLP)
+#define store		stf8
+#define myval		fvalue
+#endif
+
+.align	64
 ENTRY(memset)
+{ .mmi
 	.prologue
-	alloc	save_pfs = ar.pfs, 3, 7, 0, 0	
-	.save ar.lc, save_lc
-	mov	save_lc = ar.lc
+	alloc	tmp = ar.pfs, 3, 0, 0, 0
+	lfetch.nt1 [dest]
+	.save   ar.lc, save_lc
+	movi0	save_lc = ar.lc
+} { .mmi
 	.body
-	mov	ret0 = dest
-	and	tmp = 7, dest
-	cmp.eq	p6, p0 = cnt, r0
-(p6)	br.cond.spnt .restore_and_exit ;;
+	mov	ret0 = dest		// return value
+	cmp.ne	p_nz, p_zr = value, r0	// use stf.spill if value is zero
+	cmp.eq	p_scr, p0 = cnt, r0
+;; }
+{ .mmi
+	and	ptr2 = -(MIN1+1), dest	// aligned address
+	and	tmp = MIN1, dest	// prepare to check for alignment
+	tbit.nz p_y, p_n = dest, 0	// Do we have an odd address? (M_B_U)
+} { .mib
 	mov	ptr1 = dest
-	sub	loopcnt = 8, tmp
-	cmp.gt	p6, p0 = 16, cnt
-(p6)	br.cond.spnt .set_few;;
-	cmp.eq	p6, p0 = tmp, r0
-(p6)	br.cond.sptk .dest_aligned
-	sub	cnt = cnt, loopcnt
-	adds	loopcnt = -1, loopcnt;;
-	mov	ar.lc = loopcnt;;	
-.l1:
-	st1	[ptr1] = byteval, 1
-	br.cloop.dptk	.l1 ;;
-.dest_aligned:
-	adds	ptr2 = 8, ptr1
-	mux1	wordval = byteval, @brcst
-	shr.u	loopcnt = cnt, 4 ;;	// loopcnt = cnt / 16
-	cmp.eq	p6, p0 = loopcnt, r0
-(p6)	br.cond.spnt	.one_more
-	and	cnt = 0xf, cnt		// compute the remaining cnt
-	adds	loopcnt = -1, loopcnt;;
-	mov     ar.lc = loopcnt;;	
-.l2:
-	st8	[ptr1] = wordval, 16
-	st8	[ptr2] = wordval, 16
-	br.cloop.dptk .l2
-	cmp.le	p6, p0 = 8, cnt	;;
-.one_more:
-(p6)	st8     [ptr1] = wordval, 8
-(p6)	adds	cnt = -8, cnt ;;
-	cmp.eq	p6, p0 = cnt, r0
-(p6)	br.cond.spnt	.restore_and_exit
-.set_few:
-	adds	loopcnt = -1, cnt;;
-	mov	ar.lc = loopcnt;;
-.l3:	
-	st1     [ptr1] = byteval, 1
-	br.cloop.dptk   .l3 ;;	
+	mux1	value = value, @brcst	// create 8 identical bytes in word
+(p_scr)	br.ret.dpnt.many rp		// return immediately if count = 0
+;; }
+{ .mib
+	cmp.ne	p_unalgn, p0 = tmp, r0
+} { .mib				// NB: # of bytes to move is 1 higher
+	sub	bytecnt = (MIN1+1), tmp	//     than loopcnt
+	cmp.gt	p_scr, p0 = 16, cnt		// is it a minimalistic task?
+(p_scr)	br.cond.dptk.many .move_bytes_unaligned	// go move just a few (M_B_U)
+;; }
+{ .mmi
+(p_unalgn) add	ptr1 = (MIN1+1), ptr2		// after alignment
+(p_unalgn) add	ptr2 = MIN1P1HALF, ptr2		// after alignment
+(p_unalgn) tbit.nz.unc p_y, p_n = bytecnt, 3	// should we do a st8 ?
+;; }
+{ .mib
+(p_y)	add	cnt = -8, cnt
+(p_unalgn) tbit.nz.unc p_yy, p_nn = bytecnt, 2	// should we do a st4 ?
+} { .mib
+(p_y)	st8	[ptr2] = value, -4
+(p_n)	add	ptr2 = 4, ptr2
+;; }
+{ .mib
+(p_yy)	add	cnt = -4, cnt
+(p_unalgn) tbit.nz.unc p_y, p_n = bytecnt, 1	// should we do a st2 ?
+} { .mib
+(p_yy)	st4	[ptr2] = value, -2
+(p_nn)	add	ptr2 = 2, ptr2
+;; }
+{ .mmi
+	mov	tmp = LINE_SIZE+1		// for compare
+(p_y)	add	cnt = -2, cnt
+(p_unalgn) tbit.nz.unc p_yy, p_nn = bytecnt, 0	// should we do a st1 ?
+} { .mmi
+	setf.sig fvalue=value			// transfer value to FLP side
+(p_y)	st2	[ptr2] = value, -1
+(p_n)	add	ptr2 = 1, ptr2
+;; }
+
+{ .mmi
+(p_yy)	st1	[ptr2] = value
+  	cmp.gt	p_scr, p0 = tmp, cnt		// is it a minimalistic task?
+} { .mbb
+(p_yy)	add	cnt = -1, cnt
+(p_scr)	br.cond.dpnt.many .fraction_of_line	// go move just a few
+;; }
+
+{ .mib
+	nop.m 0
+	shr.u	linecnt = cnt, LSIZE_SH
+(p_zr)	br.cond.dptk.many .l1b			// Jump to use stf.spill
+;; }
+
+	.align 32 // -------- //  L1A: store ahead into cache lines; fill later
+{ .mmi
+	and	tmp = -(LINE_SIZE), cnt		// compute end of range
+	mov	ptr9 = ptr1			// used for prefetching
+	and	cnt = (LINE_SIZE-1), cnt	// remainder
+} { .mmi
+	mov	loopcnt = PREF_AHEAD-1		// default prefetch loop
+	cmp.gt	p_scr, p0 = PREF_AHEAD, linecnt	// check against actual value
+;; }
+{ .mmi
+(p_scr)	add	loopcnt = -1, linecnt		// start of stores
+	add	ptr2 = 8, ptr1			// (beyond prefetch stores)
+	add	ptr1 = tmp, ptr1		// first address beyond total
+;; }						// range
+{ .mmi
+	add	tmp = -1, linecnt		// next loop count
+	movi0	ar.lc = loopcnt
+;; }
+.pref_l1a:
+{ .mib
+	store [ptr9] = myval, 128	// Do stores one cache line apart
+	nop.i	0
+	br.cloop.dptk.few .pref_l1a
+;; }
+{ .mmi
+	add	ptr0 = 16, ptr2		// Two stores in parallel
+	movi0	ar.lc = tmp
+;; }
+.l1ax:
+ { .mmi
+	store [ptr2] = myval, 8
+	store [ptr0] = myval, 8
+ ;; }
+ { .mmi
+	store [ptr2] = myval, 24
+	store [ptr0] = myval, 24
+ ;; }
+ { .mmi
+	store [ptr2] = myval, 8
+	store [ptr0] = myval, 8
+ ;; }
+ { .mmi
+	store [ptr2] = myval, 24
+	store [ptr0] = myval, 24
+ ;; }
+ { .mmi
+	store [ptr2] = myval, 8
+	store [ptr0] = myval, 8
+ ;; }
+ { .mmi
+	store [ptr2] = myval, 24
+	store [ptr0] = myval, 24
+ ;; }
+ { .mmi
+	store [ptr2] = myval, 8
+	store [ptr0] = myval, 32
+ 	cmp.lt	p_scr, p0 = ptr9, ptr1		// do we need more prefetching?
+ ;; }
+{ .mmb
+	store [ptr2] = myval, 24
+(p_scr)	store [ptr9] = myval, 128
+	br.cloop.dptk.few .l1ax
+;; }
+{ .mbb
+	cmp.le  p_scr, p0 = 8, cnt		// just a few bytes left ?
+(p_scr) br.cond.dpnt.many  .fraction_of_line	// Branch no. 2
+	br.cond.dpnt.many  .move_bytes_from_alignment	// Branch no. 3
+;; }
+
+	.align 32
+.l1b:	// ------------------ //  L1B: store ahead into cache lines; fill later
+{ .mmi
+	and	tmp = -(LINE_SIZE), cnt		// compute end of range
+	mov	ptr9 = ptr1			// used for prefetching
+	and	cnt = (LINE_SIZE-1), cnt	// remainder
+} { .mmi
+	mov	loopcnt = PREF_AHEAD-1		// default prefetch loop
+	cmp.gt	p_scr, p0 = PREF_AHEAD, linecnt	// check against actual value
+;; }
+{ .mmi
+(p_scr)	add	loopcnt = -1, linecnt
+	add	ptr2 = 16, ptr1	// start of stores (beyond prefetch stores)
+	add	ptr1 = tmp, ptr1	// first address beyond total range
+;; }
+{ .mmi
+	add	tmp = -1, linecnt	// next loop count
+	movi0	ar.lc = loopcnt
+;; }
+.pref_l1b:
+{ .mib
+	stf.spill [ptr9] = f0, 128	// Do stores one cache line apart
+	nop.i   0
+	br.cloop.dptk.few .pref_l1b
+;; }
+{ .mmi
+	add	ptr0 = 16, ptr2		// Two stores in parallel
+	movi0	ar.lc = tmp
+;; }
+.l1bx:
+ { .mmi
+	stf.spill [ptr2] = f0, 32
+	stf.spill [ptr0] = f0, 32
+ ;; }
+ { .mmi
+	stf.spill [ptr2] = f0, 32
+	stf.spill [ptr0] = f0, 32
+ ;; }
+ { .mmi
+	stf.spill [ptr2] = f0, 32
+	stf.spill [ptr0] = f0, 64
+ 	cmp.lt	p_scr, p0 = ptr9, ptr1	// do we need more prefetching?
+ ;; }
+{ .mmb
+	stf.spill [ptr2] = f0, 32
+(p_scr)	stf.spill [ptr9] = f0, 128
+	br.cloop.dptk.few .l1bx
+;; }
+{ .mib
+	cmp.gt  p_scr, p0 = 8, cnt	// just a few bytes left ?
+(p_scr)	br.cond.dpnt.many  .move_bytes_from_alignment
+;; }
+
+.fraction_of_line:
+{ .mib
+	add	ptr2 = 16, ptr1
+	shr.u	loopcnt = cnt, 5   	// loopcnt = cnt / 32
+;; }
+{ .mib
+	cmp.eq	p_scr, p0 = loopcnt, r0
+	add	loopcnt = -1, loopcnt
+(p_scr)	br.cond.dpnt.many .store_words
+;; }
+{ .mib
+	and	cnt = 0x1f, cnt		// compute the remaining cnt
+	movi0   ar.lc = loopcnt
+;; }
+	.align 32
+.l2:	// ---------------------------- //  L2A:  store 32B in 2 cycles
+{ .mmb
+	store	[ptr1] = myval, 8
+	store	[ptr2] = myval, 8
+;; } { .mmb
+	store	[ptr1] = myval, 24
+	store	[ptr2] = myval, 24
+	br.cloop.dptk.many .l2
+;; }
+.store_words:
+{ .mib
+	cmp.gt	p_scr, p0 = 8, cnt		// just a few bytes left ?
+(p_scr)	br.cond.dpnt.many .move_bytes_from_alignment	// Branch
+;; }
+
+{ .mmi
+	store	[ptr1] = myval, 8		// store
+	cmp.le	p_y, p_n = 16, cnt		//
+	add	cnt = -8, cnt			// subtract
+;; }
+{ .mmi
+(p_y)	store	[ptr1] = myval, 8		// store
+(p_y)	cmp.le.unc p_yy, p_nn = 16, cnt		//
+(p_y)	add	cnt = -8, cnt			// subtract
+;; }
+{ .mmi						// store
+(p_yy)	store	[ptr1] = myval, 8		//
+(p_yy)	add	cnt = -8, cnt			// subtract
+;; }
+
+.move_bytes_from_alignment:
+{ .mib
+	cmp.eq	p_scr, p0 = cnt, r0
+	tbit.nz.unc p_y, p0 = cnt, 2	// should we terminate with a st4 ?
+(p_scr)	br.cond.dpnt.few .restore_and_exit
+;; }
+{ .mib
+(p_y)	st4	[ptr1] = value, 4
+	tbit.nz.unc p_yy, p0 = cnt, 1	// should we terminate with a st2 ?
+;; }
+{ .mib
+(p_yy)	st2	[ptr1] = value, 2
+	tbit.nz.unc p_y, p0 = cnt, 0
+;; }
+
+{ .mib
+(p_y)	st1	[ptr1] = value
+;; }
 .restore_and_exit:
-	mov	ar.lc = save_lc
-	mov	ar.pfs = save_pfs
-	br.ret.sptk.many b0					
+{ .mib
+	nop.m	0
+	movi0	ar.lc = save_lc
+	br.ret.sptk.many rp
+;; }
+
+.move_bytes_unaligned:
+{ .mmi
+       .pred.rel "mutex",p_y, p_n
+       .pred.rel "mutex",p_yy, p_nn
+(p_n)	cmp.le  p_yy, p_nn = 4, cnt
+(p_y)	cmp.le  p_yy, p_nn = 5, cnt
+(p_n)	add	ptr2 = 2, ptr1
+} { .mmi
+(p_y)	add	ptr2 = 3, ptr1
+(p_y)	st1	[ptr1] = value, 1	// fill 1 (odd-aligned) byte
+(p_y)	add	cnt = -1, cnt		// [15, 14 (or less) left]
+;; }
+{ .mmi
+(p_yy)	cmp.le.unc p_y, p0 = 8, cnt
+	add	ptr3 = ptr1, cnt	// prepare last store
+	movi0	ar.lc = save_lc
+} { .mmi
+(p_yy)	st2	[ptr1] = value, 4	// fill 2 (aligned) bytes
+(p_yy)	st2	[ptr2] = value, 4	// fill 2 (aligned) bytes
+(p_yy)	add	cnt = -4, cnt		// [11, 10 (o less) left]
+;; }
+{ .mmi
+(p_y)	cmp.le.unc p_yy, p0 = 8, cnt
+	add	ptr3 = -1, ptr3		// last store
+	tbit.nz p_scr, p0 = cnt, 1	// will there be a st2 at the end ?
+} { .mmi
+(p_y)	st2	[ptr1] = value, 4	// fill 2 (aligned) bytes
+(p_y)	st2	[ptr2] = value, 4	// fill 2 (aligned) bytes
+(p_y)	add	cnt = -4, cnt		// [7, 6 (or less) left]
+;; }
+{ .mmi
+(p_yy)	st2	[ptr1] = value, 4	// fill 2 (aligned) bytes
+(p_yy)	st2	[ptr2] = value, 4	// fill 2 (aligned) bytes
+					// [3, 2 (or less) left]
+	tbit.nz p_y, p0 = cnt, 0	// will there be a st1 at the end ?
+} { .mmi
+(p_yy)	add	cnt = -4, cnt
+;; }
+{ .mmb
+(p_scr)	st2	[ptr1] = value		// fill 2 (aligned) bytes
+(p_y)	st1	[ptr3] = value		// fill last byte (using ptr3)
+	br.ret.sptk.many rp
+;; }
 END(memset)
+
diff --git a/sysdeps/mach/configure b/sysdeps/mach/configure
index 6f1013236a..d255328188 100644
--- a/sysdeps/mach/configure
+++ b/sysdeps/mach/configure
@@ -338,3 +338,33 @@ if test $libc_cv_mach_i386_ioports = yes; then
 EOF
 
 fi
+
+echo $ac_n "checking for i386_set_gdt in mach_i386.defs""... $ac_c" 1>&6
+echo "configure:344: checking for i386_set_gdt in mach_i386.defs" >&5
+if eval "test \"`echo '$''{'libc_cv_mach_i386_gdt'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 349 "configure"
+#include "confdefs.h"
+#include <mach/i386/mach_i386.defs>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "i386_set_gdt" >/dev/null 2>&1; then
+  rm -rf conftest*
+  libc_cv_mach_i386_gdt=yes
+else
+  rm -rf conftest*
+  libc_cv_mach_i386_gdt=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$libc_cv_mach_i386_gdt" 1>&6
+if test $libc_cv_mach_i386_gdt = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_I386_SET_GDT 1
+EOF
+
+fi
diff --git a/sysdeps/mach/configure.in b/sysdeps/mach/configure.in
index 6efd39f58d..92b7777304 100644
--- a/sysdeps/mach/configure.in
+++ b/sysdeps/mach/configure.in
@@ -89,3 +89,12 @@ AC_EGREP_HEADER(i386_io_perm_modify, mach/i386/mach_i386.defs,
 if test $libc_cv_mach_i386_ioports = yes; then
   AC_DEFINE([HAVE_I386_IO_PERM_MODIFY])
 fi
+
+AC_CACHE_CHECK(for i386_set_gdt in mach_i386.defs,
+	       libc_cv_mach_i386_gdt, [dnl
+AC_EGREP_HEADER(i386_set_gdt, mach/i386/mach_i386.defs,
+		libc_cv_mach_i386_gdt=yes,
+		libc_cv_mach_i386_gdt=no)])
+if test $libc_cv_mach_i386_gdt = yes; then
+  AC_DEFINE([HAVE_I386_SET_GDT])
+fi
diff --git a/sysdeps/mach/hurd/i386/init-first.c b/sysdeps/mach/hurd/i386/init-first.c
index 47edae5086..b3804cba92 100644
--- a/sysdeps/mach/hurd/i386/init-first.c
+++ b/sysdeps/mach/hurd/i386/init-first.c
@@ -336,7 +336,7 @@ _hurd_stack_setup (volatile int argc, ...)
       *--data = (&argc)[-1];
       asm volatile ("movl %0, %%esp\n" /* Switch to new outermost stack.  */
 		    "movl $0, %%ebp\n" /* Clear outermost frame pointer.  */
-		    "jmp *%1" : : "r" (data), "r" (&doinit1));
+		    "jmp *%1" : : "r" (data), "r" (&doinit1) : "sp", "bp");
       /* NOTREACHED */
     }