about summary refs log tree commit diff
diff options
context:
space:
mode:
authorAnton Youdkevitch <anton.youdkevitch@bell-sw.com>2018-10-16 11:00:27 -0700
committerSteve Ellcey <sellcey@caviumnetworks.com>2018-10-16 11:00:27 -0700
commit75c1aee500ac95bde2b800b3d787c0dd805a8a82 (patch)
tree654659bd639a9d9e6cd3cb9313f7ee8cc03672dc
parentbcdb1bfa0c700db25e0f355d912ec2309f9544a2 (diff)
downloadglibc-75c1aee500ac95bde2b800b3d787c0dd805a8a82.tar.gz
glibc-75c1aee500ac95bde2b800b3d787c0dd805a8a82.tar.xz
glibc-75c1aee500ac95bde2b800b3d787c0dd805a8a82.zip
aarch64: optimized memcpy implementation for thunderx2
Since aligned loads and stores are huge performance
advantage the implementation always tries to do aligned
access. Among the cases when src and dst addresses are
aligned or unaligned evenly there are cases of not evenly
unaligned src and dst. For such cases (if the length is
big enough) ext instruction is used to merge-and-shift
two memory chunks loaded from two adjacent aligned
locations and then the adjusted chunk gets stored to
aligned address.

Performance gain against the current T2 implementation:
     memcpy-large: 65K-32M: +40% - +10%
     memcpy-walk:  128-32M: +20% - +2%
-rw-r--r--ChangeLog6
-rw-r--r--sysdeps/aarch64/multiarch/memcpy_thunderx.S14
-rw-r--r--sysdeps/aarch64/multiarch/memcpy_thunderx2.S607
3 files changed, 609 insertions, 18 deletions
diff --git a/ChangeLog b/ChangeLog
index 8a1ca3e1e1..f3c543aa41 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,9 @@
+2018-10-16 Anton Youdkevitch <anton.youdkevitch@bell-sw.com>
+
+	* sysdeps/aarch64/multiarch/memcpy_thunderx.S: Remove thunderx2 code.
+	* sysdeps/aarch64/multiarch/memcpy_thunderx2.S: New implementation
+	for thunderX2.
+
 2018-10-15  Joseph Myers  <joseph@codesourcery.com>
 
 	* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
diff --git a/sysdeps/aarch64/multiarch/memcpy_thunderx.S b/sysdeps/aarch64/multiarch/memcpy_thunderx.S
index de494d933d..6000365e82 100644
--- a/sysdeps/aarch64/multiarch/memcpy_thunderx.S
+++ b/sysdeps/aarch64/multiarch/memcpy_thunderx.S
@@ -74,13 +74,10 @@
 
 #if IS_IN (libc)
 
-# ifndef USE_THUNDERX2
 #  undef MEMCPY
 #  define MEMCPY __memcpy_thunderx
 #  undef MEMMOVE
 #  define MEMMOVE __memmove_thunderx
-#  define USE_THUNDERX
-# endif
 
 ENTRY_ALIGN (MEMMOVE, 6)
 
@@ -182,8 +179,6 @@ L(copy96):
 	.p2align 4
 L(copy_long):
 
-# if defined(USE_THUNDERX) || defined (USE_THUNDERX2)
-
 	/* On thunderx, large memcpy's are helped by software prefetching.
 	   This loop is identical to the one below it but with prefetching
 	   instructions included.  For loops that are less than 32768 bytes,
@@ -196,11 +191,7 @@ L(copy_long):
 	bic	dst, dstin, 15
 	ldp	D_l, D_h, [src]
 	sub	src, src, tmp1
-#  if defined(USE_THUNDERX)
 	prfm	pldl1strm, [src, 384]
-#  elif defined(USE_THUNDERX2)
-	prfm	pldl1strm, [src, 256]
-#  endif
 	add	count, count, tmp1	/* Count is now 16 too large.  */
 	ldp	A_l, A_h, [src, 16]
 	stp	D_l, D_h, [dstin]
@@ -210,13 +201,9 @@ L(copy_long):
 	subs	count, count, 128 + 16	/* Test and readjust count.  */
 
 L(prefetch_loop64):
-#  if defined(USE_THUNDERX)
 	tbz	src, #6, 1f
 	prfm	pldl1strm, [src, 512]
 1:
-#  elif defined(USE_THUNDERX2)
-	prfm	pldl1strm, [src, 256]
-#  endif
 	stp	A_l, A_h, [dst, 16]
 	ldp	A_l, A_h, [src, 16]
 	stp	B_l, B_h, [dst, 32]
@@ -230,7 +217,6 @@ L(prefetch_loop64):
 	b	L(last64)
 
 L(copy_long_without_prefetch):
-# endif
 
 	and	tmp1, dstin, 15
 	bic	dst, dstin, 15
diff --git a/sysdeps/aarch64/multiarch/memcpy_thunderx2.S b/sysdeps/aarch64/multiarch/memcpy_thunderx2.S
index 8501abf725..5bdf0f8f21 100644
--- a/sysdeps/aarch64/multiarch/memcpy_thunderx2.S
+++ b/sysdeps/aarch64/multiarch/memcpy_thunderx2.S
@@ -17,11 +17,610 @@
    License along with the GNU C Library; if not, see
    <http://www.gnu.org/licenses/>.  */
 
-/* The actual code in this memcpy and memmove is in memcpy_thunderx.S.
-   The only real differences are with the prefetching instructions.  */
+#include <sysdep.h>
 
+/* Assumptions:
+ *
+ * ARMv8-a, AArch64, unaligned accesses.
+ *
+ */
+
+#define dstin	x0
+#define src	x1
+#define count	x2
+#define dst	x3
+#define srcend	x4
+#define dstend	x5
+#define tmp2    x6
+#define tmp3    x7
+#define tmp3w   w7
+#define A_l	x6
+#define A_lw	w6
+#define A_h	x7
+#define A_hw	w7
+#define B_l	x8
+#define B_lw	w8
+#define B_h	x9
+#define C_l	x10
+#define C_h	x11
+#define D_l	x12
+#define D_h	x13
+#define E_l	src
+#define E_h	count
+#define F_l	srcend
+#define F_h	dst
+#define G_l	count
+#define G_h	dst
+#define tmp1	x14
+
+#define A_q     q0
+#define B_q     q1
+#define C_q     q2
+#define D_q     q3
+#define E_q     q4
+#define F_q     q5
+#define G_q     q6
+#define H_q	q7
+#define I_q	q16
+#define J_q	q17
+
+#define A_v     v0
+#define B_v     v1
+#define C_v     v2
+#define D_v     v3
+#define E_v     v4
+#define F_v     v5
+#define G_v     v6
+#define H_v     v7
+#define I_v     v16
+#define J_v	v17
+
+#ifndef MEMMOVE
+# define MEMMOVE memmove
+#endif
+#ifndef MEMCPY
+# define MEMCPY memcpy
+#endif
+
+#if IS_IN (libc)
+
+#undef MEMCPY
+#undef MEMMOVE
 #define MEMCPY __memcpy_thunderx2
 #define MEMMOVE __memmove_thunderx2
-#define USE_THUNDERX2
 
-#include "memcpy_thunderx.S"
+
+/* Moves are split into 3 main cases: small copies of up to 16 bytes,
+   medium copies of 17..96 bytes which are fully unrolled. Large copies
+   of more than 96 bytes align the destination and use an unrolled loop
+   processing 64 bytes per iteration.
+   Overlapping large forward memmoves use a loop that copies backwards.
+*/
+
+ENTRY_ALIGN (MEMMOVE, 6)
+
+	DELOUSE (0)
+	DELOUSE (1)
+	DELOUSE (2)
+
+	sub	tmp1, dstin, src
+	cmp	count, 96
+	ccmp	tmp1, count, 2, hi
+	b.lo	L(move_long)
+
+	prfm	PLDL1KEEP, [src]
+	add	srcend, src, count
+	add	dstend, dstin, count
+	cmp	count, 16
+	b.ls	L(copy16)
+	cmp	count, 96
+	b.hi	L(copy_long)
+
+	/* Medium copies: 17..96 bytes.  */
+	sub	tmp1, count, 1
+	ldp	A_l, A_h, [src]
+	tbnz	tmp1, 6, L(copy96)
+	ldp	D_l, D_h, [srcend, -16]
+	tbz	tmp1, 5, 1f
+	ldp	B_l, B_h, [src, 16]
+	ldp	C_l, C_h, [srcend, -32]
+	stp	B_l, B_h, [dstin, 16]
+	stp	C_l, C_h, [dstend, -32]
+1:
+	stp	A_l, A_h, [dstin]
+	stp	D_l, D_h, [dstend, -16]
+	ret
+
+	.p2align 4
+	/* Small copies: 0..16 bytes.  */
+L(copy16):
+	cmp	count, 8
+	b.lo	1f
+	ldr	A_l, [src]
+	ldr	A_h, [srcend, -8]
+	str	A_l, [dstin]
+	str	A_h, [dstend, -8]
+	ret
+	.p2align 4
+1:
+	tbz	count, 2, 1f
+	ldr	A_lw, [src]
+	ldr	A_hw, [srcend, -4]
+	str	A_lw, [dstin]
+	str	A_hw, [dstend, -4]
+	ret
+
+	/* Copy 0..3 bytes.  Use a branchless sequence that copies the same
+	   byte 3 times if count==1, or the 2nd byte twice if count==2.  */
+1:
+	cbz	count, 2f
+	lsr	tmp1, count, 1
+	ldrb	A_lw, [src]
+	ldrb	A_hw, [srcend, -1]
+	ldrb	B_lw, [src, tmp1]
+	strb	A_lw, [dstin]
+	strb	B_lw, [dstin, tmp1]
+	strb	A_hw, [dstend, -1]
+2:	ret
+
+	.p2align 4
+	/* Copy 64..96 bytes.  Copy 64 bytes from the start and
+	   32 bytes from the end.  */
+L(copy96):
+	ldp	B_l, B_h, [src, 16]
+	ldp	C_l, C_h, [src, 32]
+	ldp	D_l, D_h, [src, 48]
+	ldp	E_l, E_h, [srcend, -32]
+	ldp	F_l, F_h, [srcend, -16]
+	stp	A_l, A_h, [dstin]
+	stp	B_l, B_h, [dstin, 16]
+	stp	C_l, C_h, [dstin, 32]
+	stp	D_l, D_h, [dstin, 48]
+	stp	E_l, E_h, [dstend, -32]
+	stp	F_l, F_h, [dstend, -16]
+	ret
+
+	/* Align DST to 16 byte alignment so that we don't cross cache line
+	   boundaries on both loads and stores.  There are at least 96 bytes
+	   to copy, so copy 16 bytes unaligned and then align.  The loop
+	   copies 64 bytes per iteration and prefetches one iteration ahead.  */
+
+	.p2align 4
+L(copy_long):
+	and	tmp1, dstin, 15
+	bic	dst, dstin, 15
+	ldp	D_l, D_h, [src]
+	sub	src, src, tmp1
+	add	count, count, tmp1	/* Count is now 16 too large.  */
+	ldp	A_l, A_h, [src, 16]
+	stp	D_l, D_h, [dstin]
+	ldp	B_l, B_h, [src, 32]
+	ldp	C_l, C_h, [src, 48]
+	ldp	D_l, D_h, [src, 64]!
+	subs	count, count, 128 + 16	/* Test and readjust count.  */
+	b.ls	L(last64)
+L(loop64):
+	stp	A_l, A_h, [dst, 16]
+	ldp	A_l, A_h, [src, 16]
+	stp	B_l, B_h, [dst, 32]
+	ldp	B_l, B_h, [src, 32]
+	stp	C_l, C_h, [dst, 48]
+	ldp	C_l, C_h, [src, 48]
+	stp	D_l, D_h, [dst, 64]!
+	ldp	D_l, D_h, [src, 64]!
+	subs	count, count, 64
+	b.hi	L(loop64)
+
+	/* Write the last full set of 64 bytes.  The remainder is at most 64
+	   bytes, so it is safe to always copy 64 bytes from the end even if
+	   there is just 1 byte left.  */
+L(last64):
+	ldp	E_l, E_h, [srcend, -64]
+	stp	A_l, A_h, [dst, 16]
+	ldp	A_l, A_h, [srcend, -48]
+	stp	B_l, B_h, [dst, 32]
+	ldp	B_l, B_h, [srcend, -32]
+	stp	C_l, C_h, [dst, 48]
+	ldp	C_l, C_h, [srcend, -16]
+	stp	D_l, D_h, [dst, 64]
+	stp	E_l, E_h, [dstend, -64]
+	stp	A_l, A_h, [dstend, -48]
+	stp	B_l, B_h, [dstend, -32]
+	stp	C_l, C_h, [dstend, -16]
+	ret
+
+	.p2align 4
+L(move_long):
+	cbz	tmp1, 3f
+
+	add	srcend, src, count
+	add	dstend, dstin, count
+
+	/* Align dstend to 16 byte alignment so that we don't cross cache line
+	   boundaries on both loads and stores.  There are at least 96 bytes
+	   to copy, so copy 16 bytes unaligned and then align.  The loop
+	   copies 64 bytes per iteration and prefetches one iteration ahead.  */
+
+	and	tmp1, dstend, 15
+	ldp	D_l, D_h, [srcend, -16]
+	sub	srcend, srcend, tmp1
+	sub	count, count, tmp1
+	ldp	A_l, A_h, [srcend, -16]
+	stp	D_l, D_h, [dstend, -16]
+	ldp	B_l, B_h, [srcend, -32]
+	ldp	C_l, C_h, [srcend, -48]
+	ldp	D_l, D_h, [srcend, -64]!
+	sub	dstend, dstend, tmp1
+	subs	count, count, 128
+	b.ls	2f
+
+	nop
+1:
+	stp	A_l, A_h, [dstend, -16]
+	ldp	A_l, A_h, [srcend, -16]
+	stp	B_l, B_h, [dstend, -32]
+	ldp	B_l, B_h, [srcend, -32]
+	stp	C_l, C_h, [dstend, -48]
+	ldp	C_l, C_h, [srcend, -48]
+	stp	D_l, D_h, [dstend, -64]!
+	ldp	D_l, D_h, [srcend, -64]!
+	subs	count, count, 64
+	b.hi	1b
+
+	/* Write the last full set of 64 bytes.  The remainder is at most 64
+	   bytes, so it is safe to always copy 64 bytes from the start even if
+	   there is just 1 byte left.  */
+2:
+	ldp	G_l, G_h, [src, 48]
+	stp	A_l, A_h, [dstend, -16]
+	ldp	A_l, A_h, [src, 32]
+	stp	B_l, B_h, [dstend, -32]
+	ldp	B_l, B_h, [src, 16]
+	stp	C_l, C_h, [dstend, -48]
+	ldp	C_l, C_h, [src]
+	stp	D_l, D_h, [dstend, -64]
+	stp	G_l, G_h, [dstin, 48]
+	stp	A_l, A_h, [dstin, 32]
+	stp	B_l, B_h, [dstin, 16]
+	stp	C_l, C_h, [dstin]
+3:	ret
+
+END (MEMMOVE)
+libc_hidden_builtin_def (MEMMOVE)
+
+
+/* Copies are split into 3 main cases: small copies of up to 16 bytes,
+   medium copies of 17..96 bytes which are fully unrolled. Large copies
+   of more than 96 bytes align the destination and use load-and-merge
+   approach in the case src and dst addresses are unaligned not evenly,
+   so that, loads and stores are always aligned.
+   Large copies use an unrolled loop processing 64 bytes per iteration.
+   The current optimized memcpy implementation is not compatible with
+   memmove and is separated from it completely.
+
+   memcpy implementation below is not compatible with memmove
+   because of pipelined loads/stores, which are faster, but they
+   can't be used in the case of overlapping memmove arrays */
+
+#define MEMCPY_PREFETCH_LDR 640
+
+ENTRY (MEMCPY)
+	DELOUSE (0)
+	DELOUSE (1)
+	DELOUSE (2)
+
+	add     srcend, src, count
+	cmp     count, 16
+	b.ls    L(memcopy16)
+	ldr     A_q, [src], #16
+	add     dstend, dstin, count
+	and     tmp1, src, 15
+	cmp     count, 96
+	b.hi    L(memcopy_long)
+
+	/* Medium copies: 17..96 bytes.  */
+	ldr     E_q, [srcend, -16]
+	cmp     count, 64
+	b.gt    L(memcpy_copy96)
+	cmp     count, 48
+	b.le    L(bytes_17_to_48)
+	/* 49..64 bytes */
+	ldp     B_q, C_q, [src]
+	str     E_q, [dstend, -16]
+	stp     A_q, B_q, [dstin]
+	str     C_q, [dstin, 32]
+	ret
+
+L(bytes_17_to_48):
+	/* 17..48 bytes*/
+	cmp     count, 32
+	b.gt    L(bytes_32_to_48)
+	/* 17..32 bytes*/
+	str     A_q, [dstin]
+	str     E_q, [dstend, -16]
+	ret
+
+L(bytes_32_to_48):
+	/* 32..48 */
+	ldr     B_q, [src]
+	str     A_q, [dstin]
+	str     E_q, [dstend, -16]
+	str     B_q, [dstin, 16]
+	ret
+
+	.p2align 4
+	/* Small copies: 0..16 bytes.  */
+L(memcopy16):
+	cmp     count, 8
+	b.lo    L(bytes_0_to_8)
+	ldr     A_l, [src]
+	ldr     A_h, [srcend, -8]
+	add     dstend, dstin, count
+	str     A_l, [dstin]
+	str     A_h, [dstend, -8]
+	ret
+	.p2align 4
+
+L(bytes_0_to_8):
+	tbz     count, 2, L(bytes_0_to_3)
+	ldr     A_lw, [src]
+	ldr     A_hw, [srcend, -4]
+	add     dstend, dstin, count
+	str     A_lw, [dstin]
+	str     A_hw, [dstend, -4]
+	ret
+
+	/* Copy 0..3 bytes.  Use a branchless sequence that copies the same
+	   byte 3 times if count==1, or the 2nd byte twice if count==2.  */
+L(bytes_0_to_3):
+	cbz     count, L(end)
+	lsr     tmp1, count, 1
+	ldrb    A_lw, [src]
+	ldrb    A_hw, [srcend, -1]
+	add     dstend, dstin, count
+	ldrb    B_lw, [src, tmp1]
+	strb    A_lw, [dstin]
+	strb    B_lw, [dstin, tmp1]
+	strb    A_hw, [dstend, -1]
+L(end): ret
+
+	.p2align 4
+
+L(memcpy_copy96):
+	/* Copying 65..96 bytes. A_q (first 16 bytes) and
+	   E_q(last 16 bytes) are already loaded.
+
+	   The size is large enough to benefit from aligned
+	   loads */
+	bic     src, src, 15
+	ldp     B_q, C_q, [src]
+	str     A_q, [dstin]
+	/* Loaded 64 bytes, second 16-bytes chunk can be
+	   overlapping with the first chunk by tmp1 bytes.
+	   Stored 16 bytes. */
+	sub     dst, dstin, tmp1
+	add     count, count, tmp1
+	/* The range of count being [65..96] becomes [65..111]
+	   after tmp [0..15] gets added to it,
+	   count now is <bytes-left-to-load>+48 */
+	cmp     count, 80
+	b.gt    L(copy96_medium)
+	ldr     D_q, [src, 32]
+	stp     B_q, C_q, [dst, 16]
+	str     E_q, [dstend, -16]
+	str     D_q, [dst, 48]
+	ret
+
+	.p2align 4
+L(copy96_medium):
+	ldp     D_q, A_q, [src, 32]
+	str     B_q, [dst, 16]
+	cmp     count, 96
+	b.gt    L(copy96_large)
+	str     E_q, [dstend, -16]
+	stp     C_q, D_q, [dst, 32]
+	str     A_q, [dst, 64]
+	ret
+
+L(copy96_large):
+	ldr     F_q, [src, 64]
+	stp     C_q, D_q, [dst, 32]
+	str     E_q, [dstend, -16]
+	stp     A_q, F_q, [dst, 64]
+	ret
+
+	.p2align 4
+L(memcopy_long):
+	bic     src, src, 15
+	ldp     B_q, C_q, [src], #32
+	str     A_q, [dstin]
+	sub     dst, dstin, tmp1
+	add     count, count, tmp1
+	add     dst, dst, 16
+	and	tmp1, dst, 15
+	ldp     D_q, E_q, [src], #32
+	str     B_q, [dst], #16
+
+	/* Already loaded 64+16 bytes. Check if at
+	   least 64 more bytes left */
+	subs    count, count, 64+64+16
+	b.lt    L(loop128_exit2)
+	cmp     count, MEMCPY_PREFETCH_LDR + 64 + 32
+	b.lt    L(loop128)
+	cbnz	tmp1, L(dst_unaligned)
+	sub     count, count, MEMCPY_PREFETCH_LDR + 64 + 32
+
+	.p2align 4
+
+L(loop128_prefetch):
+	str     C_q, [dst], #16
+	prfm    pldl1strm, [src, MEMCPY_PREFETCH_LDR]
+	str     D_q, [dst], #16
+	ldp     F_q, G_q, [src], #32
+	str	E_q, [dst], #16
+	ldp     H_q, A_q, [src], #32
+	str     F_q, [dst], #16
+	prfm    pldl1strm, [src, MEMCPY_PREFETCH_LDR]
+	str     G_q, [dst], #16
+	ldp     B_q, C_q, [src], #32
+	str	H_q, [dst], #16
+	ldp     D_q, E_q, [src], #32
+	stp	A_q, B_q, [dst], #32
+	subs	count, count, 128
+	b.ge    L(loop128_prefetch)
+
+L(preloop128):
+	add	count, count, MEMCPY_PREFETCH_LDR + 64 + 32
+	.p2align 4
+L(loop128):
+	ldp     F_q, G_q, [src], #32
+	str     C_q, [dst], #16
+	ldp     B_q, A_q, [src], #32
+	str     D_q, [dst], #16
+	stp     E_q, F_q, [dst], #32
+	stp     G_q, B_q, [dst], #32
+	subs    count, count, 64
+	b.lt    L(loop128_exit1)
+L(loop128_proceed):
+	ldp     B_q, C_q, [src], #32
+	str     A_q, [dst], #16
+	ldp     D_q, E_q, [src], #32
+	str     B_q, [dst], #16
+	subs    count, count, 64
+	b.ge    L(loop128)
+
+	.p2align 4
+L(loop128_exit2):
+	stp     C_q, D_q, [dst], #32
+	str     E_q, [dst], #16
+	b       L(copy_long_check32);
+
+L(loop128_exit1):
+	/* A_q is still not stored and 0..63 bytes left,
+	   so, count is -64..-1.
+	   Check if less than 32 bytes left (count < -32) */
+	str     A_q, [dst], #16
+L(copy_long_check32):
+	cmn     count, 64
+	b.eq    L(copy_long_done)
+	cmn     count, 32
+	b.le    L(copy_long_last32)
+	ldp     B_q, C_q, [src]
+	stp     B_q, C_q, [dst]
+
+L(copy_long_last32):
+	ldp     F_q, G_q, [srcend, -32]
+	stp     F_q, G_q, [dstend, -32]
+
+L(copy_long_done):
+	ret
+
+L(dst_unaligned):
+	/* For the unaligned store case the code loads two
+	   aligned chunks and then merges them using ext
+	   instruction. This can be up to 30% faster than
+	   the the simple unaligned store access.
+
+	   Current state: tmp1 = dst % 16; C_q, D_q, E_q
+	   contains data yet to be stored. src and dst points
+	   to next-to-be-processed data. A_q, B_q contains
+	   data already stored before, count = bytes left to
+	   be load decremented by 64.
+
+	   The control is passed here if at least 64 bytes left
+	   to be loaded. The code does two aligned loads and then
+	   extracts (16-tmp1) bytes from the first register and
+	   tmp1 bytes from the next register forming the value
+	   for the aligned store.
+
+	   As ext instruction can only have it's index encoded
+	   as immediate. 15 code chunks process each possible
+	   index value. Computed goto is used to reach the
+	   required code. */
+	
+	/* Store the 16 bytes to dst and align dst for further
+	   operations, several bytes will be stored at this
+	   address once more */
+	str     C_q, [dst], #16
+	ldp     F_q, G_q, [src], #32
+	bic	dst, dst, 15
+	adrp	tmp2, L(ext_table)
+	add	tmp2, tmp2, :lo12:L(ext_table)
+	add	tmp2, tmp2, tmp1, LSL #2
+	ldr	tmp3w, [tmp2]
+	add	tmp2, tmp2, tmp3w, SXTW
+	br	tmp2
+
+#define EXT_CHUNK(shft) \
+.p2align 4 ;\
+L(ext_size_ ## shft):;\
+	ext     A_v.16b, C_v.16b, D_v.16b, 16-shft;\
+	ext     B_v.16b, D_v.16b, E_v.16b, 16-shft;\
+	subs    count, count, 32;\
+	b.ge    2f;\
+1:;\
+	stp     A_q, B_q, [dst], #32;\
+	ext     H_v.16b, E_v.16b, F_v.16b, 16-shft;\
+	ext     I_v.16b, F_v.16b, G_v.16b, 16-shft;\
+	stp     H_q, I_q, [dst], #16;\
+	add     dst, dst, tmp1;\
+	str     G_q, [dst], #16;\
+	b       L(copy_long_check32);\
+2:;\
+	stp     A_q, B_q, [dst], #32;\
+	prfm    pldl1strm, [src, MEMCPY_PREFETCH_LDR];\
+	ldp     D_q, J_q, [src], #32;\
+	ext     H_v.16b, E_v.16b, F_v.16b, 16-shft;\
+	ext     I_v.16b, F_v.16b, G_v.16b, 16-shft;\
+	mov     C_v.16b, G_v.16b;\
+	stp     H_q, I_q, [dst], #32;\
+	ldp     F_q, G_q, [src], #32;\
+	ext     A_v.16b, C_v.16b, D_v.16b, 16-shft;\
+	ext     B_v.16b, D_v.16b, J_v.16b, 16-shft;\
+	mov     E_v.16b, J_v.16b;\
+	subs    count, count, 64;\
+	b.ge    2b;\
+	b	1b;\
+
+EXT_CHUNK(1)
+EXT_CHUNK(2)
+EXT_CHUNK(3)
+EXT_CHUNK(4)
+EXT_CHUNK(5)
+EXT_CHUNK(6)
+EXT_CHUNK(7)
+EXT_CHUNK(8)
+EXT_CHUNK(9)
+EXT_CHUNK(10)
+EXT_CHUNK(11)
+EXT_CHUNK(12)
+EXT_CHUNK(13)
+EXT_CHUNK(14)
+EXT_CHUNK(15)
+
+END (MEMCPY)
+	.section	.rodata
+	.p2align	4
+
+L(ext_table):
+	/* The first entry is for the alignment of 0 and is never
+	   actually used (could be any value).  */
+	.word	0
+	.word	L(ext_size_1) -.
+	.word	L(ext_size_2) -.
+	.word	L(ext_size_3) -.
+	.word	L(ext_size_4) -.
+	.word	L(ext_size_5) -.
+	.word	L(ext_size_6) -.
+	.word	L(ext_size_7) -.
+	.word	L(ext_size_8) -.
+	.word	L(ext_size_9) -.
+	.word	L(ext_size_10) -.
+	.word	L(ext_size_11) -.
+	.word	L(ext_size_12) -.
+	.word	L(ext_size_13) -.
+	.word	L(ext_size_14) -.
+	.word	L(ext_size_15) -.
+
+libc_hidden_builtin_def (MEMCPY)
+#endif