#!/bin/sh #- # Copyright (c) 2012 Juan Romero Pardines . # 2012 Dave Elusive . # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. # IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT # NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #- # Make sure we don't inherit these from env. SOURCE_DONE= HOSTNAME_DONE= KEYBOARD_DONE= LOCALE_DONE= TIMEZONE_DONE= ROOTPASSWORD_DONE= BOOTLOADER_DONE= PARTITIONS_DONE= NETWORK_DONE= FILESYSTEMS_DONE= TARGETDIR=/mnt/target LOG=/dev/tty7 CONF_FILE=/tmp/.void-installer.conf if [ ! -f $CONF_FILE ]; then touch -f $CONF_FILE fi ANSWER=$(mktemp -t vinstall-XXXXXXXX || exit 1) TARGET_FSTAB=$(mktemp -t vinstall-fstab-XXXXXXXX || exit 1) trap "DIE" INT TERM QUIT # disable printk if [ -w /proc/sys/kernel/printk ]; then echo 0 >/proc/sys/kernel/printk fi # Detect if this is an EFI system. if [ -e /sys/firmware/efi/systab ]; then EFI_SYSTEM=1 fi # dialog colors BLACK="\Z0" RED="\Z1" GREEN="\Z2" YELLOW="\Z3" BLUE="\Z4" MAGENTA="\Z5" CYAN="\Z6" WHITE="\Z7" BOLD="\Zb" REVERSE="\Zr" UNDERLINE="\Zu" RESET="\Zn" # Properties shared per widget. MENULABEL="${BOLD}Use UP and DOWN keys to navigate \ menus. Use TAB to switch between buttons and ENTER to select.${RESET}" MENUSIZE="14 60 0" INPUTSIZE="8 60" MSGBOXSIZE="8 70" YESNOSIZE="$INPUTSIZE" WIDGET_SIZE="10 70" # Hardcoded list of timezones; to not depend on tzdata. TIMEZONES=" Africa/Abidjan Africa/Accra Africa/Addis_Ababa Africa/Algiers Africa/Asmara Africa/Bamako Africa/Bangui Africa/Banjul Africa/Bissau Africa/Blantyre Africa/Brazzaville Africa/Bujumbura Africa/Cairo Africa/Casablanca Africa/Ceuta Africa/Conakry Africa/Dakar Africa/Dar_es_Salaam Africa/Djibouti Africa/Douala Africa/El_Aaiun Africa/Freetown Africa/Gaborone Africa/Harare Africa/Johannesburg Africa/Juba Africa/Kampala Africa/Khartoum Africa/Kigali Africa/Kinshasa Africa/Lagos Africa/Libreville Africa/Lome Africa/Luanda Africa/Lubumbashi Africa/Lusaka Africa/Malabo Africa/Maputo Africa/Maseru Africa/Mbabane Africa/Mogadishu Africa/Monrovia Africa/Nairobi Africa/Ndjamena Africa/Niamey Africa/Nouakchott Africa/Ouagadougou Africa/Porto-Novo Africa/Sao_Tome Africa/Tripoli Africa/Tunis Africa/Windhoek America/Adak America/Anchorage America/Anguilla America/Antigua America/Araguaina America/Argentina/Buenos_Aires America/Argentina/Catamarca America/Argentina/Cordoba America/Argentina/Jujuy America/Argentina/La_Rioja America/Argentina/Mendoza America/Argentina/Rio_Gallegos America/Argentina/Salta America/Argentina/San_Juan America/Argentina/San_Luis America/Argentina/Tucuman America/Argentina/Ushuaia America/Aruba America/Asuncion America/Atikokan America/Bahia America/Bahia_Banderas America/Barbados America/Belem America/Belize America/Blanc-Sablon America/Boa_Vista America/Bogota America/Boise America/Cambridge_Bay America/Campo_Grande America/Cancun America/Caracas America/Cayenne America/Cayman America/Chicago America/Chihuahua America/Costa_Rica America/Creston America/Cuiaba America/Curacao America/Danmarkshavn America/Dawson America/Dawson_Creek America/Denver America/Detroit America/Dominica America/Edmonton America/Eirunepe America/El_Salvador America/Fortaleza America/Glace_Bay America/Godthab America/Goose_Bay America/Grand_Turk America/Grenada America/Guadeloupe America/Guatemala America/Guayaquil America/Guyana America/Halifax America/Havana America/Hermosillo America/Indiana/Indianapolis America/Indiana/Knox America/Indiana/Marengo America/Indiana/Petersburg America/Indiana/Tell_City America/Indiana/Vevay America/Indiana/Vincennes America/Indiana/Winamac America/Inuvik America/Iqaluit America/Jamaica America/Juneau America/Kentucky/Louisville America/Kentucky/Monticello America/Kralendijk America/La_Paz America/Lima America/Los_Angeles America/Lower_Princes America/Maceio America/Managua America/Manaus America/Marigot America/Martinique America/Matamoros America/Mazatlan America/Menominee America/Merida America/Metlakatla America/Mexico_City America/Miquelon America/Moncton America/Monterrey America/Montevideo America/Montreal America/Montserrat America/Nassau America/New_York America/Nipigon America/Nome America/Noronha America/North_Dakota/Beulah America/North_Dakota/Center America/North_Dakota/New_Salem America/Ojinaga America/Panama America/Pangnirtung America/Paramaribo America/Phoenix America/Port-au-Prince America/Port_of_Spain America/Porto_Velho America/Puerto_Rico America/Rainy_River America/Rankin_Inlet America/Recife America/Regina America/Resolute America/Rio_Branco America/Santa_Isabel America/Santarem America/Santiago America/Santo_Domingo America/Sao_Paulo America/Scoresbysund America/Shiprock America/Sitka America/St_Barthelemy America/St_Johns America/St_Kitts America/St_Lucia America/St_Thomas America/St_Vincent America/Swift_Current America/Tegucigalpa America/Thule America/Thunder_Bay America/Tijuana America/Toronto America/Tortola America/Vancouver America/Whitehorse America/Winnipeg America/Yakutat America/Yellowknife Antarctica/Casey Antarctica/Davis Antarctica/DumontDUrville Antarctica/Macquarie Antarctica/Mawson Antarctica/McMurdo Antarctica/Palmer Antarctica/Rothera Antarctica/South_Pole Antarctica/Syowa Antarctica/Vostok Arctic/Longyearbyen Asia/Aden Asia/Almaty Asia/Amman Asia/Anadyr Asia/Aqtau Asia/Aqtobe Asia/Ashgabat Asia/Baghdad Asia/Bahrain Asia/Baku Asia/Bangkok Asia/Beirut Asia/Bishkek Asia/Brunei Asia/Choibalsan Asia/Chongqing Asia/Colombo Asia/Damascus Asia/Dhaka Asia/Dili Asia/Dubai Asia/Dushanbe Asia/Gaza Asia/Harbin Asia/Hebron Asia/Ho_Chi_Minh Asia/Hong_Kong Asia/Hovd Asia/Irkutsk Asia/Jakarta Asia/Jayapura Asia/Jerusalem Asia/Kabul Asia/Kamchatka Asia/Karachi Asia/Kashgar Asia/Kathmandu Asia/Kolkata Asia/Krasnoyarsk Asia/Kuala_Lumpur Asia/Kuching Asia/Kuwait Asia/Macau Asia/Magadan Asia/Makassar Asia/Manila Asia/Muscat Asia/Nicosia Asia/Novokuznetsk Asia/Novosibirsk Asia/Omsk Asia/Oral Asia/Phnom_Penh Asia/Pontianak Asia/Pyongyang Asia/Qatar Asia/Qyzylorda Asia/Rangoon Asia/Riyadh Asia/Sakhalin Asia/Samarkand Asia/Seoul Asia/Shanghai Asia/Singapore Asia/Taipei Asia/Tashkent Asia/Tbilisi Asia/Tehran Asia/Thimphu Asia/Tokyo Asia/Ulaanbaatar Asia/Urumqi Asia/Vientiane Asia/Vladivostok Asia/Yakutsk Asia/Yekaterinburg Asia/Yerevan Atlantic/Azores Atlantic/Bermuda Atlantic/Canary Atlantic/Cape_Verde Atlantic/Faroe Atlantic/Madeira Atlantic/Reykjavik Atlantic/South_Georgia Atlantic/St_Helena Atlantic/Stanley Australia/Adelaide Australia/Brisbane Australia/Broken_Hill Australia/Currie Australia/Darwin Australia/Eucla Australia/Hobart Australia/Lindeman Australia/Lord_Howe Australia/Melbourne Australia/Perth Australia/Sydney Europe/Amsterdam Europe/Andorra Europe/Athens Europe/Belgrade Europe/Berlin Europe/Bratislava Europe/Brussels Europe/Bucharest Europe/Budapest Europe/Chisinau Europe/Copenhagen Europe/Dublin Europe/Gibraltar Europe/Guernsey Europe/Helsinki Europe/Isle_of_Man Europe/Istanbul Europe/Jersey Europe/Kaliningrad Europe/Kiev Europe/Lisbon Europe/Ljubljana Europe/London Europe/Luxembourg Europe/Madrid Europe/Malta Europe/Mariehamn Europe/Minsk Europe/Monaco Europe/Moscow Europe/Oslo Europe/Paris Europe/Podgorica Europe/Prague Europe/Riga Europe/Rome Europe/Samara Europe/San_Marino Europe/Sarajevo Europe/Simferopol Europe/Skopje Europe/Sofia Europe/Stockholm Europe/Tallinn Europe/Tirane Europe/Uzhgorod Europe/Vaduz Europe/Vatican Europe/Vienna Europe/Vilnius Europe/Volgograd Europe/Warsaw Europe/Zagreb Europe/Zaporozhye Europe/Zurich Indian/Antananarivo Indian/Chagos Indian/Christmas Indian/Cocos Indian/Comoro Indian/Kerguelen Indian/Mahe Indian/Maldives Indian/Mauritius Indian/Mayotte Indian/Reunion Pacific/Apia Pacific/Auckland Pacific/Chatham Pacific/Chuuk Pacific/Easter Pacific/Efate Pacific/Enderbury Pacific/Fakaofo Pacific/Fiji Pacific/Funafuti Pacific/Galapagos Pacific/Gambier Pacific/Guadalcanal Pacific/Guam Pacific/Honolulu Pacific/Johnston Pacific/Kiritimati Pacific/Kosrae Pacific/Kwajalein Pacific/Majuro Pacific/Marquesas Pacific/Midway Pacific/Nauru Pacific/Niue Pacific/Norfolk Pacific/Noumea Pacific/Pago_Pago Pacific/Palau Pacific/Pitcairn Pacific/Pohnpei Pacific/Port_Moresby Pacific/Rarotonga Pacific/Saipan Pacific/Tahiti Pacific/Tarawa Pacific/Tongatapu Pacific/Wake Pacific/Wallis" DIALOG() { rm -f $ANSWER dialog --colors --keep-tite --no-shadow --no-mouse \ --backtitle "${BOLD}${WHITE}Void Linux installation -- http://www.voidlinux.eu/${RESET}" \ --cancel-label "Back" --aspect 20 "$@" 2>$ANSWER return $? } DIE() { rval=$1 [ -z "$rval" ] && rval=0 clear rm -f $ANSWER $TARGET_FSTAB # reenable printk if [ -w /proc/sys/kernel/printk ]; then echo 4 >/proc/sys/kernel/printk fi umount_filesystems exit $rval } set_option() { if grep -Eq "^${1}.*" $CONF_FILE; then sed -i -e "/^${1}.*/d" $CONF_FILE fi echo "${1} ${2}" >>$CONF_FILE } get_option() { echo $(grep -E "^${1}.*" $CONF_FILE|sed -e "s|${1}||") } show_disks() { local dev size sectorsize gbytes # IDE for dev in $(ls /sys/block|grep -E '^hd'); do if [ "$(cat /sys/block/$dev/device/media)" = "disk" ]; then # Find out nr sectors and bytes per sector; echo "/dev/$dev" size=$(cat /sys/block/$dev/size) sectorsize=$(cat /sys/block/$dev/queue/hw_sector_size) gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))" echo "size:${gbytes}GB;sector_size:$sectorsize" fi done # SATA/SCSI and Virtual disks (virtio) for dev in $(ls /sys/block|grep -E '^[sv]d'); do if [ "$(cat /sys/block/$dev/device/type)" != "5" ]; then echo "/dev/$dev" size=$(cat /sys/block/$dev/size) sectorsize=$(cat /sys/block/$dev/queue/hw_sector_size) gbytes="$(($size * $sectorsize / 1024 / 1024 / 1024))" echo "size:${gbytes}GB;sector_size:$sectorsize" fi done } show_partitions() { local dev fstype fssize p part set -- $(show_disks) while [ $# -ne 0 ]; do disk=$(basename $1) shift 2 # ATA/SCSI/SATA for p in /sys/block/$disk/$disk*; do if [ -d $p ]; then part=$(basename $p) fstype=$(blkid /dev/$part|awk '{print $3}'|sed -e 's/TYPE=\"\(.*\)\"/\1/g') [ "$fstype" = "iso9660" ] && continue fssize=$(lsblk -r /dev/$part|awk '{print $4}'|grep -v SIZE) echo "/dev/$part" echo "size:${fssize:-unknown};fstype:${fstype:-none}" fi done # LVM for p in $(ls /dev/mapper 2>/dev/null|grep -v control); do [ "$p" = "live-rw" ] && continue fstype=$(blkid /dev/$part|awk '{print $3}'|sed -e 's/TYPE=\"\(.*\)\"/\1/g') fssize=$(lsblk -r /dev/mapper/$p|awk '{print $4}'|grep -v SIZE) echo "/dev/mapper/$p" echo "size:${fssize:-unknown};fstype:${fstype:-none}" done # Software raid (md) for p in $(ls -d /dev/md* 2>/dev/null|grep '[0-9]'); do if cat /proc/mdstat|grep -qw $(echo $p|sed -e 's|/dev/||g'); then fstype=$(blkid /dev/$part|awk '{print $3}'|sed -e 's/TYPE=\"\(.*\)\"/\1/g') fssize=$(lsblk -r /dev/$p|awk '{print $4}'|grep -v SIZE) echo "$p" echo "size:${fssize:-unknown};fstype:${fstype:-none}" fi done done } menu_filesystems() { local dev fstype fssize mntpoint reformat while true; do DIALOG --title " Select the partition to edit " --menu "$MENULABEL" \ ${MENUSIZE} $(show_partitions) [ $? -ne 0 ] && return dev=$(cat $ANSWER) DIALOG --title " Select the filesystem type for $dev " \ --menu "$MENULABEL" ${MENUSIZE} \ "vfat" "FAT32" \ "btrfs" "Oracle's Btrfs" \ "ext2" "Linux ext2 (no journaling)" \ "ext3" "Linux ext3 (journal)" \ "ext4" "Linux ext4 (journal)" \ "swap" "Linux swap" \ "xfs" "SGI's XFS" if [ $? -eq 0 ]; then fstype=$(cat $ANSWER) else continue fi if [ "$fstype" != "swap" ]; then DIALOG --inputbox "Please specify the mount point for $dev:" ${INPUTSIZE} if [ $? -eq 0 ]; then mntpoint=$(cat $ANSWER) elif [ $? -eq 1 ]; then continue fi else mntpoint=swap fi DIALOG --yesno "Do you want to create a new filesystem on $dev?" ${YESNOSIZE} if [ $? -eq 0 ]; then reformat=1 elif [ $? -eq 1 ]; then reformat=0 else continue fi fssize=$(lsblk -r $dev|awk '{print $4}'|grep -v SIZE) set -- "$fstype" "$fssize" "$mntpoint" "$reformat" if [ -n "$1" -a -n "$2" -a -n "$3" -a -n "$4" ]; then local bdev=$(basename $dev) if grep -Eq "^MOUNTPOINT \/dev\/${bdev}.*" $CONF_FILE; then sed -i -e "/^MOUNTPOINT \/dev\/${bdev}.*/d" $CONF_FILE fi echo "MOUNTPOINT $dev $1 $2 $3 $4" >>$CONF_FILE fi done } menu_partitions() { DIALOG --title " Select the disk to partition " \ --menu "$MENULABEL" ${MENUSIZE} $(show_disks) if [ $? -eq 0 ]; then local device=$(cat $ANSWER) DIALOG --title "Modify Partition Table on $device" --msgbox "\n ${BOLD}GNU parted will be executed in disk $device.${RESET}\n\n For BIOS systems, MBR or GPT partition tables are supported.\n To use GPT on PC BIOS systems an empty partition of 1MB must be added\n at the first 2GB of the disk with the TOGGLE \`bios_grub' enabled.\n ${BOLD}NOTE: you don't need this on EFI systems.${RESET}\n\n For EFI systems GPT is mandatory and a FAT32 partition with at least\n 100MB must be created with the TOGGLE \`boot', this will be used as\n EFI System Partition. This partition must have mountpoint as \`/boot/efi'.\n\n At least 2 partitions are required: swap and rootfs (/).\n For swap, RAM*2 must be really enough. For / 600MB are required.\n\n ${BOLD}WARNING: /usr is not supported as a separate partition.${RESET}\n ${BOLD}WARNING: changes made by parted are destructive, you've been warned. ${RESET}\n" 18 80 if [ $? -eq 0 ]; then while true; do clear; parted $device; PARTITIONS_DONE=1; partprobe $device break done else return fi fi } menu_keymap() { local KEYMAPS="de German fr French it Italian en English es Spanish ru Russia us American" while true; do DIALOG --title " Select your keymap " --menu "$MENULABEL" 14 70 14 ${KEYMAPS} if [ $? -eq 0 ]; then set_option KEYMAP "$(cat $ANSWER)" loadkeys "$(cat $ANSWER)" KEYBOARD_DONE=1 break else return fi done } set_keymap() { local KEYMAP=$(get_option KEYMAP) sed -i -e "s|KEYMAP=.*|KEYMAP=$KEYMAP|g" $TARGETDIR/etc/vconsole.conf } menu_locale() { local _locales="$(localectl --no-pager list-locales)" local _LOCALES= for f in ${_locales}; do _LOCALES="${_LOCALES} ${f} -" done while true; do DIALOG --title " Select your locale " --menu "$MENULABEL" 14 70 14 ${_LOCALES} if [ $? -eq 0 ]; then set_option LANG "$(cat $ANSWER)" LOCALE_DONE=1 break else return fi done } set_locale() { local LOCALE=$(get_option LOCALE) sed -i -e "s|LANG=.*|LANG=$KEYMAP|g" $TARGETDIR/etc/locale.conf } menu_timezone() { local _tzones= for f in ${TIMEZONES}; do _tzones="${_tzones} ${f} -" done while true; do DIALOG --title " Select your timezone " --menu "$MENULABEL" 14 70 14 ${_tzones} if [ $? -eq 0 ]; then set_option TIMEZONE "$(cat $ANSWER)" TIMEZONE_DONE=1 break else return fi done } set_timezone() { local TIMEZONE="$(get_option TIMEZONE)" ln -sf /usr/share/zoneinfo/${TIMEZONE} $TARGETDIR/etc/localtime } menu_hostname() { while true; do DIALOG --inputbox "Set the machine hostname:" ${INPUTSIZE} if [ $? -eq 0 ]; then set_option HOSTNAME "$(cat $ANSWER)" HOSTNAME_DONE=1 break else return fi done } set_hostname() { echo $(get_option HOSTNAME) > $TARGETDIR/etc/hostname } menu_rootpassword() { local _firstpass= _secondpass= _desc= while true; do if [ -n "${_firstpass}" ]; then _desc="Enter the root password again (password won't be displayed)" else _desc="Enter the root password (password won't be displayed)" fi DIALOG --passwordbox "${_desc}" ${MSGBOXSIZE} if [ $? -eq 0 ]; then if [ -z "${_firstpass}" ]; then _firstpass="$(cat $ANSWER)" else _secondpass="$(cat $ANSWER)" fi if [ -n "${_firstpass}" -a -n "${_secondpass}" ]; then if [ "${_firstpass}" != "${_secondpass}" ]; then DIALOG --infobox "Passwords do not match! please reenter it again" 6 80 unset _firstpass _secondpass sleep 2 && continue fi set_option ROOTPASSWORD "${_firstpass}" ROOTPASSWORD_DONE=1 break fi else return fi done } set_rootpassword() { echo "root:$(get_option ROOTPASSWORD)" | chpasswd -R $TARGETDIR -c SHA512 } menu_bootloader() { while true; do DIALOG --title " Select the disk to install the bootloader" \ --menu "$MENULABEL" ${MENUSIZE} $(show_disks) if [ $? -eq 0 ]; then set_option BOOTLOADER "$(cat $ANSWER)" BOOTLOADER_DONE=1 break else return fi done } set_bootloader() { local dev=$(get_option BOOTLOADER) grub_args= # Check if it's an EFI system via efivars module. if [ -n "$EFI_SYSTEM" ]; then grub_args="--target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=void_grub --recheck" fi echo "Running grub-install $grub_args $dev..." >$LOG chroot $TARGETDIR grub-install $grub_args $dev >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ failed to install GRUB to $dev!\nCheck $LOG for errors." ${MSGBOXSIZE} DIE 1 fi echo "Running grub-mkconfig on $TARGETDIR..." >$LOG chroot $TARGETDIR grub-mkconfig -o /boot/grub/grub.cfg >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR${RESET}: \ failed to run grub-mkconfig!\nCheck $LOG for errors." ${MSGBOXSIZE} DIE 1 fi } test_network() { rm -f xtraeme.asc && \ wget http://xbps.nopcode.org/live/xtraeme.asc >$LOG 2>&1 if [ $? -eq 0 ]; then DIALOG --msgbox "Network is working properly!" ${MSGBOXSIZE} NETWORK_DONE=1 return 1 fi DIALOG --msgbox "Network is unaccessible, please setup it properly." ${MSGBOXSIZE} } configure_wifi() { local dev="$1" DIALOG --form "Wireless configuration for $dev:" 0 0 0 \ "SSID:" 1 1 "add your AP name here" 1 21 20 0 \ "Encryption:" 2 1 "Only supported: WEP or WPA-PSK" 2 21 20 0 \ "Passphrase:" 3 1 "Enter the AP passphrase here" 3 21 20 0 || return 1 } configure_eth() { local dev="$1" DIALOG --yesno "Do you want to use DHCP for $dev?" ${YESNOSIZE} if [ $? -eq 0 ]; then configure_net_dhcp $dev elif [ $? -eq 1 ]; then configure_net_static $dev fi } iface_setup() { ifconfig $1|grep -q 'inet addr:' return $? } configure_net_dhcp() { local dev="$1" iface_setup $dev if [ $? -eq 1 ]; then udhcpc -q -t 10 -n -i $dev 2>&1 | tee $LOG | \ DIALOG --progressbox "Initializing $dev via DHCP..." ${WIDGET_SIZE} if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} failed to run udhcpc. See $LOG for details." ${MSGBOXSIZE} return 1 fi iface_setup $dev if [ $? -eq 1 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} DHCP request failed for $dev. Check $LOG for errors." ${MSGBOXSIZE} return 1 fi fi test_network if [ $? -eq 1 ]; then set_option NETWORK "${dev} dhcp" fi } configure_net_static() { local ip gw dns1 dns2 dev=$1 DIALOG --form "Static IP configuration for $dev:" 0 0 0 \ "IP address:" 1 1 "192.168.0.2" 1 21 20 0 \ "Gateway:" 2 1 "192.168.0.1" 2 21 20 0 \ "DNS Primary" 3 1 "8.8.8.8" 3 21 20 0 \ "DNS Secondary" 4 1 "8.8.4.4" 4 21 20 0 || return 1 set -- $(cat $ANSWER) ip=$1; gw=$2; dns1=$3; dns2=$4 echo "running: ifconfig $dev $IPADDR up" >$LOG ifconfig $dev $ip up >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} Failed to setup $dev interface." ${MSGBOXSIZE} return 1 fi route add default gw $gw >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} failed to setup your gateway." ${MSGBOXSIZE} return 1 fi echo "nameserver $dns1" >/etc/resolv.conf echo "nameserver $dns2" >>/etc/resolv.conf test_network if [ $? -eq 1 ]; then set_option NETWORK "${dev} static $ip $gw $dns1 $dns2" fi } menu_network() { local dev addr f DEVICES for f in $(ls /sys/class/net); do [ "$f" = "lo" ] && continue addr=$(cat /sys/class/net/$f/address) DEVICES="$DEVICES $f $addr" done DIALOG --title " Select the network interface to configure " \ --menu "$MENULABEL" ${MENUSIZE} ${DEVICES} if [ $? -eq 0 ]; then dev=$(cat $ANSWER) if $(echo $dev|grep -q "wlan[0-9]" 2>/dev/null); then configure_wifi $dev else configure_eth $dev fi fi } validate_filesystems() { local mnts dev size fstype mntpt mkfs rootfound swapfound fmt local usrfound efi_system_partition unset TARGETFS mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE) set -- ${mnts} while [ $# -ne 0 ]; do dev=$2; fstype=$3; size=$4; mntpt="$5"; mkfs=$6 shift 6 if [ "$mntpt" = "/" ]; then rootfound=1 elif [ "$mntpt" = "/usr" ]; then usrfound=1 elif [ "$fstype" = "vfat" -a "$mntpt" = "/boot/efi" ]; then efi_system_partition=1 fi if [ "$mkfs" -eq 1 ]; then fmt="NEW FILESYSTEM: " fi if [ -z "$TARGETFS" ]; then TARGETFS="${fmt}$dev ($size) mounted on $mntpt as ${fstype}\n" else TARGETFS="${TARGETFS}${fmt}${dev} ($size) mounted on $mntpt as ${fstype}\n" fi done if [ -z "$rootfound" ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ the mount point for the root filesystem (/) has not yet been configured." ${MSGBOXSIZE} return 1 elif [ -n "$usrfound" ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ /usr mount point has been configured but is not supported, please remove it to continue." ${MSGBOXSIZE} return 1 elif [ -n "$EFI_SYSTEM" -a -z "$efi_system_partition" ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ The EFI System Partition has not yet been configured, please create it\n as FAT32, mountpoint /boot/efi and at least with 100MB of size." ${MSGBOXSIZE} fi FILESYSTEMS_DONE=1 } create_filesystems() { local mnts dev mntpt fstype mkfs size rv uuid mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE) set -- ${mnts} while [ $# -ne 0 ]; do dev=$2; fstype=$3; mntpt="$5"; mkfs=$6 shift 6 # swap partitions if [ "$fstype" = "swap" ]; then swapoff $dev >/dev/null 2>&1 if [ "$mkfs" -eq 1 ]; then mkswap $dev >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ failed to create swap on ${dev}!\ncheck $LOG for errors." ${MSGBOXSIZE} DIE 1 fi fi swapon $dev >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ failed to activate swap on $dev!\ncheck $LOG for errors." ${MSGBOXSIZE} DIE 1 fi # Add entry for target fstab uuid=$(blkid $dev|awk '{print $2}'|sed -e 's/UUID=\"\(.*\)\"/\1/g') echo "UUID=$uuid none swap sw 0 0" >>$TARGET_FSTAB continue fi if [ "$mkfs" -eq 1 ]; then case "$fstype" in vfat) MKFS="mkfs.vfat -F32"; modprobe vfat >$LOG 2>&1;; xfs) MKFS="mkfs.xfs -f"; modprobe xfs >$LOG 2>&1;; ext2) MKFS="mke2fs"; modprobe ext2 >$LOG 2>&1;; ext3) MKFS="mke2fs -j"; modprobe ext3 >$LOG 2>&1;; ext4) MKFS="mke2fs -t ext4"; modprobe ext4 >$LOG 2>&1;; btrfs) MKFS="mkfs.btrfs"; modprobe btrfs >$LOG 2>&1;; esac DIALOG --infobox "Creating filesystem $fstype on $dev for $mntpt ..." 8 60 echo "Running $MKFS $dev..." >$LOG $MKFS $dev >$LOG 2>&1; rv=$? if [ $rv -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ failed to create filesystem $fstype on $dev!\ncheck $LOG for errors." ${MSGBOXSIZE} DIE 1 fi fi # Mount rootfs the first one. [ "$mntpt" != "/" ] && continue mkdir -p $TARGETDIR echo "Mounting $dev on $mntpt ($fstype)..." >$LOG mount -t $fstype $dev $TARGETDIR >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ failed to mount $dev on ${mntpt}! check $LOG for errors." ${MSGBOXSIZE} DIE 1 fi # Add entry to target fstab uuid=$(blkid $dev|awk '{print $2}'|sed -e 's/UUID=\"\(.*\)\"/\1/g') echo "UUID=$uuid $mntpt $fstype defaults 0 1" >>$TARGET_FSTAB done # mount all filesystems in target rootfs mnts=$(grep -E '^MOUNTPOINT.*' $CONF_FILE) set -- ${mnts} while [ $# -ne 0 ]; do dev=$2; fstype=$3; mntpt="$5" shift 6 [ "$mntpt" = "/" -o "$fstype" = "swap" ] && continue mkdir -p ${TARGETDIR}${mntpt} echo "Mounting $dev on $mntpt ($fstype)..." >$LOG mount -t $fstype $dev ${TARGETDIR}${mntpt} >$LOG 2>&1 if [ $? -ne 0 ]; then DIALOG --msgbox "${BOLD}${RED}ERROR:${RESET} \ failed to mount $dev on $mntpt! check $LOG for errors." ${MSGBOXSIZE} DIE fi # Add entry to target fstab uuid=$(blkid $dev|awk '{print $2}'|sed -e 's/UUID=\"\(.*\)\"/\1/g') echo "UUID=$uuid $mntpt $fstype defaults 0 1" >>$TARGET_FSTAB done } mount_filesystems() { for f in sys proc dev; do [ ! -d $TARGETDIR/$f ] && mkdir $TARGETDIR/$f echo "Mounting $TARGETDIR/$f..." >$LOG mount --bind /$f $TARGETDIR/$f >$LOG 2>&1 done } umount_filesystems() { local f for f in sys proc dev; do echo "Unmounting $TARGETDIR/$f..." >$LOG umount $TARGETDIR/$f >$LOG 2>&1 done local mnts=$(grep -E '^MOUNTPOINT.*$' $CONF_FILE) set -- ${mnts} while [ $# -ne 0 ]; do local dev=$2; local fstype=$3; local mntpt=$5 shift 6 if [ "$fstype" = "swap" ]; then echo "Disabling swap space on $dev..." >$LOG swapoff $dev >$LOG 2>&1 continue fi if [ "$mntpt" != "/" ]; then echo "Unmounting $TARGETDIR/$mntpt..." >$LOG umount $TARGETDIR/$mntpt >$LOG 2>&1 fi done echo "Unmounting $TARGETDIR..." >$LOG umount $TARGETDIR >$LOG 2>&1 } install_packages() { local _grub= if [ -n "$EFI_SYSTEM" ]; then _grub="grub-x86_64-efi" else _grub="grub" fi mkdir -p $TARGETDIR/boot/grub stdbuf -oL xbps-install -C /tmp/xbps.conf \ -r $TARGETDIR -Sy base-system ${_grub} 2>&1 | \ DIALOG --title "Installing base system packages..." \ --programbox 24 80 if [ $? -ne 0 ]; then DIE 1 fi } menu_install() { # Don't continue if filesystems are not ready. validate_filesystems || return 1 ROOTPASSWORD_DONE="$(get_option ROOTPASSWORD)" BOOTLOADER_DONE="$(get_option BOOTLOADER)" if [ -z "$FILESYSTEMS_DONE" ]; then DIALOG --msgbox "${BOLD}Required filesystems were not configured, \ please do so before starting the installation.${RESET}" ${MSGBOXSIZE} return 1 elif [ -z "$ROOTPASSWORD_DONE" ]; then DIALOG --msgbox "${BOLD}The root password has not been configured, \ please do so before starting the installation.${RESET}" ${MSGBOXSIZE} return 1 elif [ -z "$BOOTLOADER_DONE" ]; then DIALOG --msgbox "${BOLD}The disk to install the bootloader has not been \ configured, please do so before starting the installation.${RESET}" ${MSGBOXSIZE} return 1 fi DIALOG --yesno "${BOLD}The following operations will be executed:${RESET}\n\n ${BOLD}${TARGETFS}${RESET}\n ${BOLD}${RED}WARNING: data on partitions will be COMPLETELY DESTROYED for new \ filesystems.${RESET}\n\n ${BOLD}Do you want to continue?${RESET}" 20 80 || return unset TARGETFS # Create and mount filesystems create_filesystems # mount required fs mount_filesystems # If source not set use defaults. if [ -z "$SOURCE_DONE" ]; then enable_localsrc fi # Install required packages. install_packages DIALOG --infobox "Applying installer settings..." 4 60 # copy target fstab. install -Dm644 $TARGET_FSTAB $TARGETDIR/etc/fstab # set up keymap, locale, timezone, hostname and root passwd. set_keymap set_locale set_timezone set_hostname set_rootpassword # Copy /etc/skel files for root. cp $TARGETDIR/etc/skel/.[bix]* $TARGETDIR/root # network settings for target if [ -n "$NETWORK_DONE" ]; then local net=$(grep -E '^NETWORK.*' $CONF_FILE) set -- ${net} local dev=$2; local type=$3; local ip=$4; local gw=$5 local dns1=$6; local dns2=$7 if [ "$type" = "dhcp" ]; then # if user had dhcp enabled, enable dhcpcd service for that device. chroot $TARGETDIR systemctl enable dhcpcd.service >$LOG 2>&1 else # static IP through dhcpcd. mv $TARGETDIR/etc/dhcpcd.conf $TARGETDIR/etc/dhdpcd.conf.orig echo "# Static IP configuration set by the void-installer for $dev." \ >$TARGETDIR/etc/dhcpcd.conf echo "interface $dev" >>$TARGETDIR/etc/dhcpcd.conf echo "static ip_address=$ip" >>$TARGETDIR/etc/dhcpcd.conf echo "static routers=$gw" >>$TARGETDIR/etc/dhcpcd.conf echo "static domain_name_servers=$dns1 $dns2" >>$TARGETDIR/etc/dhcpcd.conf chroot $TARGETDIR systemctl enable dhcpcd.service >$LOG 2>&1 fi fi # install bootloader. set_bootloader sync && sync && sync # unmount all filesystems. umount_filesystems # installed successfully. DIALOG --yesno "${BOLD}Void Linux has been installed successfully!${RESET}\n Do you want to reboot the system?" ${YESNOSIZE} if [ $? -eq 0 ]; then shutdown -r now else return fi } enable_localsrc() { # local and fallback to official remote. echo "repositories = { /packages, http://xbps.nopcode.org/repos/current }" >/tmp/xbps.conf } enable_netsrc() { # only remote. echo "repositories = { http://xbps.nopcode.org/repos/current }" > /tmp/xbps.conf } menu_source() { local src= DIALOG --title " Select installation source " \ --menu "$MENULABEL" 8 70 0 \ "Local" "Packages from ISO image" \ "Network" "Packages from official remote reposity" case "$(cat $ANSWER)" in "Local") src="local"; enable_localsrc;; "Network") src="net"; enable_netsrc; menu_network;; *) return 1;; esac SOURCE_DONE=1 set_option SOURCE $src } menu() { if [ -z "$DEFITEM" ]; then DEFITEM="Keyboard" fi DIALOG --default-item $DEFITEM \ --extra-button --extra-label "Settings" \ --title " Void Linux installation menu " \ --menu "$MENULABEL" 10 70 0 \ "Keyboard" "Set system keyboard" \ "Source" "Set source installation" \ "Hostname" "Set system hostname" \ "Locale" "Set system locale" \ "Timezone" "Set system time zone" \ "RootPassword" "Set system root password" \ "BootLoader" "Set disk to install bootloader" \ "Partition" "Partition disk(s)" \ "Filesystems" "Configure filesystems and mount points" \ "Install" "Start installation with saved settings" \ "Exit" "Exit installation" if [ $? -eq 3 ]; then # Show settings DIALOG --title "Saved settings for installation" --textbox $CONF_FILE 14 60 return fi case $(cat $ANSWER) in "Keyboard") menu_keymap && [ -n "$KEYBOARD_DONE" ] && DEFITEM="Source";; "Source") menu_source && [ -n "$SOURCE_DONE" ] && DEFITEM="Hostname";; "Hostname") menu_hostname && [ -n "$HOSTNAME_DONE" ] && DEFITEM="Locale";; "Locale") menu_locale && [ -n "$LOCALE_DONE" ] && DEFITEM="Timezone";; "Timezone") menu_timezone && [ -n "$TIMEZONE_DONE" ] && DEFITEM="RootPassword";; "RootPassword") menu_rootpassword && [ -n "$ROOTPASSWORD_DONE" ] && DEFITEM="BootLoader";; "BootLoader") menu_bootloader && [ -n "$BOOTLOADER_DONE" ] && DEFITEM="Partition";; "Partition") menu_partitions && [ -n "$PARTITIONS_DONE" ] && DEFITEM="Filesystems";; "Filesystems") menu_filesystems && [ -n "$FILESYSTEMS_DONE" ] && DEFITEM="Install";; "Install") menu_install;; "Exit") DIE;; *) DIALOG --yesno "Abort Installation?" ${YESNOSIZE} && DIE esac } # # main() # DIALOG --title "${BOLD}${RED} Enter the void ... ${RESET}" --msgbox "\n Welcome to the Void Linux installation. A simple and minimal \ Linux distribution made from scratch and built from the source package tree \ available for XBPS, a new alternative binary package system.\n\n The installation should be pretty straightforward, if you are in trouble \ please join us at ${BOLD}#xbps on irc.freenode.org${RESET}.\n\n ${BOLD}http://www.voidlinux.eu${RESET}\n\n" 16 80 while true; do menu done exit 0 # vim: set ts=4 sw=4 et: